MSI MAG Z790 Mode d'emploi

MAG Z790 TOMAHAWK WIFI DDR4

Motherboard

User Guide

Benutzerhandbuch

Manuel d’utilisation



󱞎󽧃󷱦󳡌󳧉

󻗾󻯻󺿗󻙮

󱀮󵋁󳇟󱏅

󱀮󵋁󳇟󱏇

English

Deutsch

Français



󳠌󳨨󷱆

󼪮󺊿󻬆

󶏛󹢗󰸩󳝖

󵽩󰿨󰸩󳝖

1

Contents

Quick Start..................................................................................................................... 3

Specifications .............................................................................................................. 15

Special Features ......................................................................................................... 20

Package Contents ...................................................................................................... 21

Back Panel Connectors ............................................................................................. 22

LAN Port LED Status Table .................................................................................. 23

Audio Jacks Connection ....................................................................................... 23

Overview of Components ........................................................................................... 26

CPU Socket ........................................................................................................... 27

DIMM Slots ............................................................................................................ 28

PCI_E1~3: PCIe Expansion Slots .......................................................................... 29

M2_1~4: M.2 Slots (Key M) ................................................................................... 29

SATA_1, SATA_5~6, SATA_7~8 & SATA_A1~A2: SATA 6Gb/s Connectors .......... 37

JAUD1: Front Audio Connector ............................................................................ 38

JFP1, JFP2: Front Panel Connectors ................................................................... 38

JDASH1 : Tuning Controller Connector ............................................................... 39

JCI1: Chassis Intrusion Connector ....................................................................... 39

CPU_PWR1~2, ATX_PWR1: Power Connectors ................................................... 40

JUSB4: USB 3.2 Gen 2 Type-C

Front Panel

Connector ........................................ 41

JUSB3: USB 3.2 Gen 1 Connector ........................................................................ 41

JUSB1~2: USB 2.0 Connectors ............................................................................. 42

JTPM1: TPM Module Connector ........................................................................... 42

JOC_FS1: Safe Boot Jumper ................................................................................ 43

JTBT1: Thunderbolt Add-on Card Connector ...................................................... 43

CPU_FAN1, PUMP_FAN1, SYS_FAN1~6: Fan Connectors .................................. 44

JBAT1: Clear CMOS (Reset BIOS) Jumper ........................................................... 45

BAT1: CMOS Battery ............................................................................................. 45

JRGB1: RGB LED Connector ................................................................................ 46

JARGB_V2_1~3: A-RAINBOW V2 (ARGB Gen2) LED Connectors ........................ 47

English

2

Onboard LEDs ............................................................................................................. 49

EZ Debug LED ....................................................................................................... 49

Installing OS, Drivers & MSI Center .......................................................................... 50

MSI Center ............................................................................................................ 53

UEFI BIOS .................................................................................................................... 54

BIOS Setup ............................................................................................................ 55

Resetting BIOS ...................................................................................................... 56

Updating BIOS ....................................................................................................... 56

3

Quick Start

Thank you for purchasing a new motherboard from MSI®. This Quick Start section

provides demonstration diagrams about how to install your computer. Some of the

installations also provide video demonstrations. Please link to the URL to watch it

with the web browser on your phone or tablet. You may have even link to the URL by

scanning the QR code.

Preparing Tools and Components

Intel® LGA1700 CPU LGA1700 CPU Fan

Graphics Card

SATA Hard Disk Drive

Phillips Screwdriver

Chassis

Power Supply Unit

A Package of Screws

Thermal Paste

DDR4 Memory

4

Safety Information

The components included in this package are prone to damage from electrostatic

discharge (ESD). Please adhere to the following instructions to ensure successful

computer assembly.

Ensure that all components are securely connected. Loose connections may cause

the computer to not recognize a component or fail to start.

Hold the motherboard by the edges to avoid touching sensitive components.

It is recommended to wear an electrostatic discharge (ESD) wrist strap when

handling the motherboard to prevent electrostatic damage. If an ESD wrist strap

is not available, discharge yourself of static electricity by touching another metal

object before handling the motherboard.

Store the motherboard in an electrostatic shielding container or on an anti-static

pad whenever the motherboard is not installed.

Before turning on the computer, ensure that there are no loose screws or metal

components on the motherboard or anywhere within the computer case.

Do not boot the computer before installation is completed. This could cause

permanent damage to the components as well as injury to the user.

If you need help during any installation step, please consult a certified computer

technician.

Always turn off the power supply and unplug the power cord from the power outlet

before installing or removing any computer component.

Keep this user guide for future reference.

Keep this motherboard away from humidity.

Make sure that your electrical outlet provides the same voltage as is indicated on

the PSU, before connecting the PSU to the electrical outlet.

Place the power cord such a way that people can not step on it. Do not place

anything over the power cord.

All cautions and warnings on the motherboard should be noted.

If any of the following situations arises, get the motherboard checked by service

personnel:

• Liquid has penetrated into the computer.

• The motherboard has been exposed to moisture.

• The motherboard does not work well or you can not get it work according to user

guide.

• The motherboard has been dropped and damaged.

• The motherboard has obvious sign of breakage.

Do not leave this motherboard in an environment above 60°C (140°F), it may damage

the motherboard.

5

Case stand-off notification

To prevent damage to the motherboard, any unnecessary mounting stand-off between

the motherboard circuits and the computer case is prohibited. The Case standoff keep

out zone signs will be marked on the backside of motherboard (as shown below) to

serve as a warning to user.

Avoid collision notification

Protective paint is printed around each screw hole to prevent parts from being

scratched.

6

Installing a Processor



https://youtu.be/KMf9oIDsGes

11

22

33

66

44

5577

88

99

7

Installing DDR4 memory

https://youtu.be/XiNmkDNZcZk



DIMMA2 DIMMA2

DIMMB2

DIMMA1

DIMMA2

DIMMB1

DIMMB2

8

HDD LED

RESET SW

Connecting the Front Panel Header

http://youtu.be/DPELIdVNZUI

JFP1

HDD LED HDD LED -

HDD LED +

POWER LED -

POWER LED +

POWER LED

RESET SW

POWER SW

POWER LED+

POWER LED-

HDD LED



1

2 10

9

Power LED

Reserved

Power Switch

JFP1

Reset SwitchHDD LED

9

BAT1

Installing the Motherboard

11 https://youtu.be/wWI6Qt51Wnc



Torque:

3 kgf·cm*

*3 kgf·cm

= 0.3 N·m

= 2.6 lbf·in

22

10

Connecting the Power Connectors

http://youtu.be/gkDYyR_83I4

ATX_PWR1

CPU_PWR1~2



11

Installing SATA Drives

http://youtu.be/RZsMpqxythc

11

2233

44

55



12

Installing a Graphics Card

http://youtu.be/mG0GZpr9w_A



11

22

33

44

55

66

13

Connecting Peripheral Devices

14

Power On

44

33

1122

15

Specifications

CPU

Supports 12th/ 13th Gen Intel® Core™ Processors,

Pentium® Gold and Celeron® Processors*

Processor socket LGA1700

* Please go to www.msi.com to get the newest support status as new processors

are released.

Chipset Intel® Z790 Chipset

Memory

4x DDR4 memory slots, supporting up to 128GB*

Supports 1R 2133/2666/3200 MHz (by JEDEC & POR)

Max overclocking frequency:

• 1DPC 1R Max speed up to 5333+ MHz

• 1DPC 2R Max speed up to 4800+ MHz

• 2DPC 1R Max speed up to 4400+ MHz

• 2DPC 2R Max speed up to 4000+ MHz

Supports Dual-Channel mode

Supports non-ECC, un-buffered memory

Supports Intel® Extreme Memory Profile (XMP)

* Please refer to www.msi.com for more information on compatible memory.

Expansion Slots

2x PCIe x16 slots

• PCI_E1 slot (From CPU)

• Supports up to PCIe 5.0 x16

• PCI_E3 slot (From Z790 Chipset)

• Supports up to PCIe 4.0 x4

1x PCIe 3.0 x1 slot

• PCI_E2 slot (From Z790 Chipset)

• Supports up to PCIe 3.0 x1

Onboard Graphics

1x HDMI™ 2.1 port with HDR, supporting a maximum

resolution of 4K 60Hz*/ **

1x DisplayPort 1.4 port with HBR3, supporting a maximum

resolution of 8K 60Hz*/ **

* Available only on processors featuring integrated graphics.

** Graphics specifications may vary depending on the CPU installed.

Continued on next column

16

Continued from previous column

SATA Ports

7x SATA 6Gb/s ports

• SATA_1, SATA_5~6 & SATA_7~8 (From Z790 chipset)

• SATA_A1~A2 (From ASM1061)

M.2 SSD Slots

4x M.2 slots (Key M)

• M2_1 slot (From CPU)

• Supports up to PCIe 4.0 x4

• Supports 2260/ 2280/ 22110 storage devices

• M2_2 slot (From Z790 chipset)

• Supports up to PCIe 4.0 x4

• Supports 2260/ 2280 storage devices

• M2_3* slot (From Z790 chipset)

• Supports up to PCIe 4.0 x4

• Supports up to SATA 6Gb/s

• Supports 2242/ 2260/ 2280 storage devices

• M2_4 slot (From Z790 chipset)

• Supports up to PCIe 4.0 x4

• Supports 2242/ 2260/ 2280 storage devices

* SATA_1 will be unavailable when installing M.2 SATA SSD in the M2_3 slot.

RAID

Supports RAID 0, RAID 1, RAID 5 and RAID 10 for SATA

storage devices*

Supports RAID 0, RAID 1 , RAID 5 and RAID 10 for M.2

NVMe storage devices

* SATA_A1~A2 do not support RAID function.

Audio

Realtek® ALC4080 Codec

7.1-Channel USB High Performance Audio

Supports up to 32-bit/384kHz playback on front panel

Supports S/PDIF output

LAN 1x Intel® 2.5Gbps LAN controller

Continued on next column

17

Continued from previous column

Wi-Fi & Bluetooth®

Intel® Wi-Fi 6E

The Wireless module is pre-installed in the M.2 (Key-E)

slot

Supports MU-MIMO TX/RX, 2.4GHz/ 5GHz/ 6GHz*(160MHz)

up to 2.4Gbps

Supports 802.11 a/ b/ g/ n/ ac/ ax

Supports Bluetooth® 5.3**, FIPS, FISMA

* Wi-Fi 6E 6GHz may depend on every country’s regulations and will be ready in

Windows 10 build 21H1 and Windows 11.

** Bluetooth 5.3 will be ready in Windows 10 build 21H1 and Windows 11.

Power Connectors 1x 24-pin ATX main power connector

2x 8-pin +12V power connectors

Internal USB

Connectors

1x USB 3.2 Gen 2 10Gbps Type-C front panel connector

(From Z790 chipset)

1x USB 3.2 Gen 1 5Gbps connector (From Hub GL3523)

• Supports additional 2 USB 3.2 Gen 1 5Gbps ports

2x USB 2.0 Type-A connectors (From Hub GL850G)

• Supports additional 4 USB 2.0 ports

Fan Connectors

1x 4-pin CPU fan connector

1x 4-pin water-pump fan connector

6x 4-pin system fan connectors

System Connectors

1x Front panel audio connector

2x System panel connectors

1x Chassis intrusion connector

1x TPM module connector

1x Tuning controller connector

1x TBT connector (supports RTD3)

Jumpers 1x Clear CMOS jumper

1x OC safe boot jumper

LED Features

1x 4-pin RGB LED connector

3x 3-pin ARGB Gen2 LED connectors

4x EZ Debug LED

Continued on next column

18

Continued from previous column

Back Panel

Connectors

1x DisplayPort

1x HDMI™ port

1x Clear CMOS button

1x Flash BIOS button

4x USB 3.2 Gen 1 5Gbps Type-A ports (From Hub GL3523)

4x USB 3.2 Gen 2 10Gbps Type-A ports (From Z790

chipset)

1x USB 3.2 Gen 2 10Gbps Type-C port (From Z790 chipset)

1x USB 3.2 Gen 2x2 20Gbps Type-C port (From Z790

chipset)

1x 2.5Gbps LAN (RJ45) port

2x Wi-Fi antenna connectors

5x Audio jacks

1x Optical S/PDIF Out connector

I/O Controller NUVOTON NCT6687D-M Controller Chip

Hardware Monitor

CPU/ System/ Chipset temperature detection

CPU/ System/ Pump fan speed detection

CPU/ System/ Pump fan speed control

Form Factor ATX Form Factor

9.6 in. x 12 in. (244 mm x 305 mm)

BIOS Features

1x 256 Mb flash

UEFI AMI BIOS

ACPI 6.4, SMBIOS 3.5

Multi-language

Continued on next column

La page charge ...

MSI MAG Z790 Mode d'emploi

MSI MAG Z790 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents