CE RF Exposure Compliance
This device meets the EU requirements (1999/519/EC) and the International Commission on Non-Ioniz-
ing Radiation Protection (ICNIRP) on the limitation of exposure of the general public to electromagnet-
ic ields by way of health protection.
This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.
IMPORTANT for UK Power Adapter Cord
If the available socket outlet is not suitable for the plug supplied with this equipment, it should be cut
o and an appropriate three pin plug itted. With alternative plugs on approved 3 amp fuse must be
itted in the plug or adaptor or in the main fuse box.
The plug severed from the mains lead must be destroyed, as a plug with bared lexible cords is
hazardous if engaged in a live socket outlet. In the event of replacing the plug fuse, use a 3 amp fuse
approved by ASTA to BS 1362, i.e. carries the mark. Always replace the fuse cover, never use plugs
with the fuse cover omitted.
WARNING — THIS APPLIANCE MUST BE EARTHED.
The wires in this mains lead are coloured in accordance with the following code: Green-and-Yellow =
Earth Blue = Neutral Brown = Live
As the colour of the wiring in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
• The wire which is coloured Green-and-Yellow must be connected to the terminal in the plug which
is marked with the letter “E”, or by the earth symbol or coloured Green-and-Yellow.
• The wire which is coloured Blue must be connected to the terminal which is marked with the letter
“N” or coloured Black or Blue.
• The wire which is coloured Brown must be connected to the terminal which is marked with the
letter “L” or coloured Red or Brown.