Samsung KN55S9CAF Guide de démarrage rapide

BN68-05356C-03

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

If you have any questions or comments relating to

Samsung products, please contact the SAMSUNG

customer care center.

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung.

Country

Customer Care Center

Web Site Address

CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/ca (English)

www.samsung.com/ca_fr (French)

Samsung Electronics Canada Inc., Customer Service 55

Standish Court Mississauga, Ontario L5R 4B2 Canada

U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us Samsung Electronics America, Inc. 85 Challenger Road

Ridgeeld Park, NJ 07660

[S9C-ZC]BN68-05356C-03L02.indb 1 2013-10-30 �� 5:01:36

Warning! Important Safety Instructions

This symbol indicates that high

voltage is present inside. It is

dangerous to make any kind of

contact with any internal part of this

product.

This symbol indicates that important

literature concerning operation and

maintenance has been included

with this product.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

THERE ARE NO USER SERVICEABLE PARTS

INSIDE. REFER ALL SERVICING TO QUALIFIED

PERSONNEL.

RISK OF ELECTRIC SHOCK DO NOT OPEN

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To

ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings

must never be blocked or covered.

− Do not place this apparatus in a conﬁned space, such as a bookcase, or built-in cabinet, unless proper

ventilation is provided.

− Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.

− Do not place vessels (vases, etc.) containing water on this apparatus, as this can result in a ﬁre or electric

shock.

• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming pool, etc.). If this apparatus accidentally gets wet,

unplug it and contact an authorized dealer immediately.

• This apparatus uses batteries. In your community, there might be environmental regulations that require

you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling

information.

• Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in ﬁre

or electric shock.

• Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed

upon or against them. Pay particular attention to cords at the plug end, at wall outlets, and the point where

they exit from the apparatus.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of

time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to

the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the

DC adaptor corresponds to the local electrical supply.

• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric

shock.

• To avoid electric shock, never touch the inside of this apparatus. Only a qualiﬁed technician should open this

apparatus.

• Make sure to plug the power cord in until it is ﬁrmly seated. When unplugging the power cord from a wall

outlet, always pull on the power cord's plug. Never unplug by pulling on the power cord. Do not touch the

power cord with wet hands.

• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming

from it - unplug it immediately and contact an authorized dealer or service center.

• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house

for an extended period of time (especially when children, elderly or disabled people will be left alone in the

house).

− Accumulated dust can cause an electric shock, an electric leakage, or a ﬁre by causing the power cord to

generate sparks and heat or the insulation to deteriorate.

• Be sure to contact an authorized service center for information if you intend to install your TV in a location

with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24

hours a day such in an airport, a train station, etc. Failing to do so may cause serious damage to your TV.

• Use only a properly grounded plug and wall outlet.

− An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

• To turn this apparatus off completely, you must disconnect it from the wall outlet. Consequently, the wall

outlet and power plug must be readily accessible at all times.

• Do not allow children to hang on the product.

• Store the accessories (battery, etc.) in a location safely out of the reach of children.

• Do not install the product in an unstable location such as a shaky self, a slanted ﬂoor, or a location exposed

to vibration.

• Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a

service center.

• To clean this apparatus, unplug the power cord from the wall outlet and wipe the product using a soft,

dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners,

lubricants, or detergent. These chemicals can damage the appearance of the TV or erase the printing on the

product.

• Do not expose this apparatus to dripping or splashing.

• Do not dispose of batteries in ﬁre.

• Do not short-circuit, disassemble or overheat the batteries.

• There is danger of an explosion if you replace the batteries used in the remote with the

wrong type of battery. Replace only with the same or equivalent type.

• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN

FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

Important Safety Instructions

English - 2 English - 3

[S9C-ZC]BN68-05356C-03L02.indb 2 2013-10-30 �� 5:01:37

Contents

Basic Features

7 Using the Smart Touch Control

8 Inserting the Batteries

(AAA X 2)

8 Connecting to the TV

9 Low Battery Power Warning

9 Using the touch pad

10 Changing Channels by

Entering Numbers

10 Show Status and

Notiﬁcation Banner

10 Recommended

10 History

11 Searching

11 Using the Virtual

Remote Control

11 Changing the Position of

the Virtual Remote Panel

12 Turning on the TV

12 Built-in TV Camera

13 Switching Between

Video Sources

14 Universal Remote Setup

Viewing the

e-Manual

15 Viewing the e-Manual

15 Scrolling a Page

16 Using the Top Icons

16 Returning to the Home Page

16 Searching the Index

16 Searching Pages

16 Closing the e-Manual

16 Jumping to a Menu Item

16 Updating the e-Manual

Network

Conﬁguration

17 Connecting to a Network

17 Network Connection

- Wireless

17 Wireless Network

Precautions

17 Network Security Protocols

18 Network Connection - Wired

18 Samsung Multi View

19 Using Samsung Multi View

3D Basics

20 Samsung Multi View

3D Glasses

21 Using the 3D glasses

Troubleshooting

and Other

Information

25 What is Remote Support?

25 Troubleshooting

27 Eco Sensor and

Screen Brightness

27 Assembling the Cable Manager

27 Maintenance

Speciﬁcations

28 Speciﬁcations

28 TV Upgrade using One

Connect

(sold separately)

29 Licenses

Guides

29 Warranty Information

32 Regulatory Compliance

Statements

(For 3D Active Glasses)

English - 2 English - 3

[S9C-ZC]BN68-05356C-03L02.indb 3 2013-10-30 �� 5:01:37

Figures and illustrations in this User Manual are provided for reference only

and may differ from the actual product appearance. Product design and

speciﬁcations may change without notice.

Features of your new TV

• 3D: This new feature enables you to view 3D content.

• SMART HUB:

This TV features Smart Hub, a multi-purpose entertainment and family

center. With Smart Hub, you can surf the web, download applications, and

stay in touch with family and friends through social networking services.

In addition, you can view or play photo, video, and music ﬁles stored on

external storage devices.

Press the

button to launch Smart Hub. Choose a service using the icons

displayed in the top part of the screen.

Smart Hub services and functionality include:

Social: Watch the latest YouTube videos. View the latest videos you or

your friends have posted on Facebook or Twitter. Make video calls to

friends using the TV's camera.

Apps: Samsung Apps offers an extensive collection of free and paid news,

sports, weather, and gaming content you can download directly to and

enjoy on your TV.

On TV: Check a listing of programs that are currently airing or are

scheduled to air.

Photos, Videos & Music: Play back photo, video, and music ﬁles from an

external storage device.

• Anynet+ (HDMI-CEC): Lets you control all connected Samsung devices

that support Anynet+ with your Samsung TV’s remote.

• e-Manual: Provides a detailed, on-screen user's manual built into your TV.

• SMART Interaction: Lets you access and control menu options and

functions using motions.

• Device Manager: Lets you connect a USB or Bluetooth keyboard and

mouse to your TV and use the keyboard or mouse to surf the web, key in

data, select menu settings, and more.

• MHL & Screen Mirroring: Displays mobile device screens on your TV

using a wired or wireless connection.

Accessories

Included in this box

Remote Control Stand Parts and Cables

Smart Touch Control Power cord IR extender

Batteries (AAA x 2) RCA Adapter x 2 Component adapter

One connect One connect cable

x 6

Stand Screws

• Also included: User manual, 3D Active Glasses, Quick Setup Guide

English - 4 English - 5

[S9C-ZC]BN68-05356C-03L02.indb 4 2013-10-30 �� 5:01:40

Connecting the TV to One Connect

Your TV comes with a One Connect panel. The One Connect panel lets you

connect external devices such as Blu-ray players and cable boxes to your TV.

You must connect the One Connect to your TV using the One Connect cable

before connecting any external devices to the One Connect. The One Connect

cable has two different ends, one for the TV and one for the One Connect

panel. The TV end has a small TV icon on its surface. See the diagrams below.

TV

<TV-end Connector> <One Connect-end Connector>

One Connect

[

The connectors at both ends of the One Connect cable are different

from each other in shape. When you connect the One Connect cable

to the TV, make sure that the right connector is plugged into the TV.

Connecting the One Connect cable incorrectly can damage both the

TV and the One Connect panel.

English - 4 English - 5

[S9C-ZC]BN68-05356C-03L02.indb 5 2013-10-30 �� 5:01:41

One Connect - Front

English - 6 English - 7

[S9C-ZC]BN68-05356C-03L02.indb 6 2013-10-30 �� 5:01:43

Using the Smart Touch Control

Touch Pad

• Drag on the touch pad to move the focus on the screen.

• Press the touch pad to run, activate, or select the

highlighted item.

See page 9.

VOICE: Take your voice command and enter a text using your

voice.

Displays a virtual remote panel on the screen. See page 11.

While watching TV, tap on the protruding line on the left or right

edge of the touchpad to bring up the numerical input window

on the screen. See page 10.

Changes channels.

Displays the EPG

(Electronic Program Guide).

Brings up Smart Hub applications.

See the e-Manual chapter, SMART TV Features > Smart

Hub.

✎

To exit an application that is running easily, press the

button.

Turn the satellite or cable set-top box connected to the TV on

and off.

For this, the Smart Touch Control must be conﬁgured as a

universal remote control. See page 14.

Turns the TV on and off.

Displays and selects the available video sources.

Returns to the previous menu.

: Turn on the backlight for the buttons. When on, the

buttons become illuminated for a moment when pressed.

(Using the remote control with this button set to On will reduce

the battery usage time.)

MULTI VIEW (

): Turns Samsung Multi View on and off.

MULTI VIEW (

): When using the Samsung Multi View

function, you can choose to control either Screen 1 or Screen

2.

: Turns the 3D function on or off.

See e-Manual chapter,

TV Viewing > 3D TV.

MUTE: Cuts off the sound

temporarily.

Adjusts the volume.

RECOMM.: Shows the current/scheduled program and

application recommendations. See page 10.

SEARCH: Enter search criteria to search not only many apps

and their contents on the TV but also the Web. See page 11.

Use the Voice Recognition function with the microphone

embedded in the remote control.

✎

The Voice Recognition function can be affected by

unclear pronunciation, voice level, or surrounding noise.

Basic Features

English - 6 English - 7

[S9C-ZC]BN68-05356C-03L02.indb 7 2013-10-30 �� 5:01:44

Inserting the Batteries (AAA X 2)

1

3

2

1. Insert a plastic card into the notch in the battery cover, and then rotate the

card to loosen the battery cover. Carefully pull the cover up to remove it

completely.

✎

Check the location of the battery cover notch The notch's location

may vary depending on the type of Smart Touch Control provided with

the product.

2. Insert 2 AAA batteries, making sure to align the positive and negative ends

correctly.

3. Align the battery cover with the back of the remote control, and then press

down along the edges until it is completely attached to the remote control.

Connecting to the TV

To operate the TV using a Smart Touch Control, you must ﬁrst pair it to the TV

via Bluetooth. Note that the Smart Touch Control will only work with the paired

Samsung TV.

✎

We recommend to use the Smart Touch Control in less than 20ft(6m).

A usable distance may differ depending on the wireless environmental

conditions.

1. To turn on the TV, point the Smart Touch Control at the remote control

receiver of the TV and press the P button. The remote control receiver's

location may vary depending on the model.

2. A Bluetooth icon will appear at the bottom left of the screen as shown

below. The TV will then attempt to connect to the Smart Touch Control

automatically.

3. If pairing is successful, the TV displays a small green circle between

graphics representing the TV and the Smart Touch.

4. If the Smart Touch does not pair:

a. Remove the battery cover.

b. Aim the Smart Touch at the TV's remote control receiver.

c. Use a pen tip to press and release the pairing button on the back of the

Smart Touch. (See page 9 for its location.)

d. In a few seconds, you should see the Bluetooth icon described in Step

2, and then the Smart Touch should pair.

• The ﬁrst time you turn on your TV, it will immediately start the initial setup.

English - 8 English - 9

[S9C-ZC]BN68-05356C-03L02.indb 8 2013-10-30 �� 5:01:45

Reconnecting the Smart Touch Control

If the Smart Touch Control stops operating or works abnormally, replace the

battery as this may be caused by insufﬁcient battery power. If the problem

persists, press the PAIRING button on the Smart Touch Control to restore

pairing with the TV. The PAIRING button cannot be accessed without removing

the Smart Touch Control's battery cover. Within a distance between 1ft to

13.1ft(30cm to 4m), point the Smart Touch Control to the TV receiver and

press the PAIRING button. When pairing is complete, the pairing image

displays at the bottom left of the TV screen.

Low Battery Power Warning

When the Smart Touch Control’s battery power becomes low, the indicator

(shown in the illustration below) appears on the bottom left of the TV screen.

Replace the old batteries with new alkaline ones.

Using the touch pad

Use the touch pad to implement various commands. Navigate to Tutorial

(System > Device Manager > Smart Touch Control Settings > Tutorial) in

the TV's menu to view an on-screen guide for using the Smart Touch Control.

Dragging Pressing

Drag on the touch pad to move the focus, pointer, or

highlight in the direction the ﬁnger is dragging.

Press the touch pad to select the item highlighted or

in focus. When watching TV, press and hold the touch

pad for 2 seconds to displays the channel list. On some

apps, pressing and holding the touch pad for 2 seconds

displays a list of functions available for the app.

English - 8 English - 9

[S9C-ZC]BN68-05356C-03L02.indb 9 2013-10-30 �� 5:01:46

Changing Channels by Entering Numbers

While watching TV, tap the protruding line on

the left or right edge of the touch pad to bring

up the numerical input window on the screen.

Use your ﬁnger to trace the number of the

channel you want to watch on the touch pad.

The number is displayed on the screen, and

then the TV switches to the corresponding

channel. Note that the TV may not recognize

the number you have entered if you don't

trace the number properly. Refer to the guide

below to ensure that the TV recognizes your

numerical entries accurately.

Numerical Input Guide

Refer to the diagrams below when entering numerical values. The TV may not

recognize your entries if you do not follow the sequences shown below.

Show Status and Notiﬁcation Banner

Press the MORE button on the Smart Touch Control to display the virtual

remote control, and then select the STATUS bar above the panel. The Status

and Notiﬁcation banner appears at the top of the screen. The Status and

Notiﬁcation banner provides information about your Samsung account, the

status of your network connection, and displays important notiﬁcations about

your TV and Samsung services. For more information about using the Status

and Notiﬁcation banner, refer to e-Manual > Smart Features > Status and

Notiﬁcation.

Recommended

Press the RECOMM. / SEARCH button below the touch pad of your remote,

and then select Recommended from the list that appears on bottom of the

screen. The TV displays recommended programs that are currently being aired

and recommended programs that are scheduled for airing. It also displays

recommended applications.

Select a program that is currently being aired to jump to that program and

channel.

Select a program that is scheduled for airing to set up a Scheduled Viewing.

See e-Manual > SMART TV Features > On TV for more information.

Select an application to launch the application. If the application you select is

not installed on the TV, the TV launches Samsung Apps so that you can install

it.

See e-Manual > Smart Features > Apps > Samsung Apps for more

information.

History

Press the RECOMM. / SEARCH button, and then select History from the list

displayed at the bottom of the screen. An interactive list of recently accessed

channels, media content, and applications appears on the screen.

English - 10 English - 11

[S9C-ZC]BN68-05356C-03L02.indb 10 2013-10-30 �� 5:01:47

Searching

Press the RECOMM. / SEARCH button on the Smart Touch Control. A list

appears at the bottom of the screen. Press the RECOMM. / SEARCH button

again. A keypad appears on the screen. Enter search criteria to search not

only many apps and their contents on the TV but also the Web.

Refer to e-Manual > SMART TV Features > Searching for more information.

Using the Virtual Remote Control

Press the MORE button to display the virtual remote panel on the TV screen.

The virtual remote panel consists of the number panel, a playback control

panel, and the quick access panel. Use the touch pad to highlight and select

icons, numbers, and buttons on the panels.

✎

The displayed virtual remote panel on the TV screen may differ depending

on your country.

Changing the Virtual Remote Panel

You can change which virtual remote panel is displayed on the TV screen. To

shift between panels, move the focus highlight beyond the left or right edge of

the displayed panel.

To change the panel more quickly, use the left/right scroll function on the touch

pad.

Changing the Position of the Virtual Remote Panel

To change the position of the panel, press and hold the touch pad for one

second.

Using the Number Panel

Use the number panel to enter numbers on a keypad screen or webpage or

to change the channel while watching TV. Changing the channel using the

number pad leaves a record, allowing you to easily return to previous channels.

Using the Playback Control Panel

Use the playback control panel to pause, rewind, fast forward, skip to the next

ﬁle, select a function with the

a

,

b

,

{

,

}

buttons, and much more while

enjoying media content.

Using the Quick Access Panel

Use the buttons on the quick access panel to bring up the TV's INFO, TOOLS

or e-Manual screens. Note that the buttons that appear may vary depending

on the operating mode of the Smart Touch Control (with the TV only, as a

universal remote, etc.).

English - 10 English - 11

[S9C-ZC]BN68-05356C-03L02.indb 11 2013-10-30 �� 5:01:47

Turning on the TV

Turn on the TV using the P button on the Smart Touch Control or TV panel.

✎

The first time you turn on your TV, it will immediately start the initial setup.

✎

The product color and shape may vary depending on the model.

mR

P

Speakers

Open Smart Hub.

Turn off the TV.

Select a source.Open the menu.

TV Controller

The control stick is located at

the lower-left corner on the

back of the TV.

Built-in TV Camera

This TV features a built-in TV camera and microphone that you can use for the

Motion Control, Voice Recognition, and Face Recognition features. You can

also use the camera's angle adjustment knob to change the camera's viewing

angle.

Lens

Knob for camera's angle adjustment

Extending the TV Camera

To use the TV camera, you must ﬁrst extend it. To extend the camera, push

the camera cover on the angle adjustment bar to the right as shown in the

diagram.

English - 12 English - 13

[S9C-ZC]BN68-05356C-03L02.indb 12 2013-10-30 �� 5:01:48

Retracting the Camera

If you are not using the TV camera, keep it retracted inside the TV. The Motion

Control and Face Recognition features cannot be used while the TV camera is

in the retracted state, but Voice Recognition will still be available.

Push the camera to the left as shown in the diagram. Be careful not to touch

the camera lens.

[

Do not touch the lens while operating the

TV camera. You can leave fingerprints that

may affect the image quality. If the lens

gets dirty, clean it using a soft piece of

cloth.

Switching Between Video Sources

Press the SOURCE button to switch between devices connected to the TV.

For example, to switch to a game console connected to the second HDMI

connector, press the SOURCE button. From the Source list, select HDMI2.

The connector names may vary depending on the product.

Select Tools at the upper-right corner of the source screen to access the

following functions.

• Edit Name: Lets you associate a device name to an input source.

You can select the following device names in the Edit Name option:

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver /

Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray /

HD DVD / DMA

To associate a device name to an input source, follow these steps:

1. Select Tools in the upper right corner of the source screen.

2. Select Edit Name.

3. Find the input source you want in the Source list (HDMI1, HDMI2,

Component, etc.).

4. Select the blank ﬁeld next to the input.

5. In the device name list that appears, select the name of the device

attached to the input.

English - 12 English - 13

[S9C-ZC]BN68-05356C-03L02.indb 13 2013-10-30 �� 5:01:48

When you view the Source list, the device name and the input port will be

displayed together.

− If you have connected a PC to the HDMI IN 2 (DVI) port with an HDMI

cable, select PC from the device name list.

− If you have connected a PC to the HDMI IN 2 (DVI) port with an HDMI

to DVI cable, select DVI PC from the device name list.

− If you connected an AV device to the HDMI IN 2 (DVI) port with an

HDMI to DVI cable, select DVI Devices from the device name list.

• Information: View detailed information about the connected devices.

• Anynet+ (HDMI-CEC): A list appears showing Anynet+ compatible ones

of external devices connected to the TV.

• Remove USB: Remove the USB device from the list safely. This function is

only available when the USB device selected.

Universal Remote Setup: Use to conﬁgure universal remote control settings.

Using the universal remote control, you can control external devices connected

to the TV, such as a set-top box, Blu-ray player, and AV receiver.

Universal Remote Setup

This TV has a universal remote control feature that lets you control cable

boxes, Blu-ray players, home theaters, and other third-party external devices

connected to the TV using the TV's remote control.

2 inches

Insert the IR Extender’s plug into the IR Out port on the One Connect. Place

the other end of the IR Extender (the Transmitter) no more than 2 inches from

the external device. Face the IR Extender’s transmitter toward the external

device’s remote control signal receiver. Note that there should be no obstacles

between the IR Extender and the external device. Any obstacles will interfere

with the transmission of the remote control signal.

English - 14 English - 15

[S9C-ZC]BN68-05356C-03L02.indb 14 2013-10-30 �� 5:01:49

To set up an external device for universal control, follow these steps:

1. Turn on the external device you want to set up universal remote

functionality for, and then press the SOURCE button on your Smart Touch

Control to bring up the Source screen.

2. Select the Universal Remote Setup icon at the top of the screen. This

initiates the universal remote setup process.

• When you select the Universal Remote Setup icon, Universal Remote

Setup appears on the screen.

• You can also access Universal Remote Setup through the TV’s menu.

(System > Device Manager > Universal Remote Control)

3. On the Select Device Type screen, select Start, and then tap the Touch

Pad.

4. Select the kind of device you want control - a set-top-box, Blu-ray player,

or home theater - and then tap the Touch Pad.

5. On the Select Brand screen, scroll the list of brands up or down, highlight

your brand of device, and then tap the Touch Pad.

• If your brand is not in the list, scroll to the “Search for the brand” entry

ﬁeld, and then tap the Touch Pad. The on-screen keyboard appears.

Enter your brand using the keyboard. When ﬁnished, select Done, and

then tap the Touch Pad.

6. On the Select TV Input Source screen, select the input source the device is

connected to, and then tap the Touch Pad.

7. On the Control Test screen, tap the Touch Pad to start the Function Test.

If the device turns off, universal remote functionality has been established.

Select Yes, and then tap the Touch Pad.

Viewing the e-Manual

This TV has a built-in e-Manual that contains information about your TV's key

features and instructions for using them. To view the e-Manual, use one of the

following methods:

• Open the Support menu and choose e-Manual (Troubleshooting).

• Press the MORE button on the Smart Touch Control to display the virtual

remote panel on the TV screen. Flick the touch pad until the quick access

panel appears, select the e-Manual icon, and then press the touch pad.

✎

In the e-Manual, words in blue refer to screen menu options and words in

light blue refer to remote control buttons.

✎

A printable version of this guide is also available at www.samsung.com/

support.

Scrolling a Page

To scroll a page, use of one of the following methods:

• Place the focus on the

or button at the right edge of the screen,

and then press the touch pad.

• Drag or ﬂick up or down the line on either the left or right edge of the touch

pad.

• Place the focus on the

or button at the right edge of the screen,

drag or ﬂick up or down on the touch pad.

English - 14 English - 15

[S9C-ZC]BN68-05356C-03L02.indb 15 2013-10-30 �� 5:01:49

Using the Top Icons

Use the Back, Forward, and Opened pages icons on the top left of the

screen to navigate through pages. These icons are available after you have

viewed two or more pages.

Returning to the Home Page

To return to the home page, select the

a

button or select on the top right

of the screen.

✎

To select a letter button (

a

,

b

,

{

,

}

), press the MORE button on the

Smart Touch Control to display the virtual remote panel on the TV screen.

Flick the touch pad until the playback control panel appears, select the

a

button, and then press the touch pad.

Searching the Index

Select the

b

button or select on the top right of the screen to display the

index. Select a term to display the page containing the term.

Searching Pages

Select the

{

button or select on the top right of the screen, and enter

search criteria. Select a page from the list of search results to display it.

Closing the e-Manual

To close the e-Manual, press and hold the RETURN button or select at the

upper-right corner of the screen or press EXIT button.

Jumping to a Menu Item

To jump directly to the menu item that is described in the current section,

select

Try Now

. You can also jump from a menu item directly to the related

section in the e-Manual. With a menu screen displayed, press the MORE

button on the Smart Touch Control and then select the e-Manual icon on the

virtual remote panel that appears on the screen.

✎

This feature may not be available, depending on the menu.

Picture

Picture Mode

• Cell Light

• Contrast

• Brightness

• Sharpness

• Color

• Tint (G/R)

Standard

14

100

45

50

R50

G50

e-Manual

Try Now

Updating the e-Manual

Press the button on your remote, select Apps, and then select More Apps

at the bottom of the screen.

On the More Apps screen, select Update Apps, and then select e-Manual

from the list. The TV starts updating the e-Manual to the latest version.

✎

e-Manual appears on the Update Apps screen only if there is an update

available. Update Apps appears on the screen only if there is one or

more app updates available.

English - 16 English - 17

[S9C-ZC]BN68-05356C-03L02.indb 16 2013-10-30 �� 5:01:50

Connecting to a Network

Connecting the TV to a network gives you access to online services such

as Smart Hub and lets you update the TV's software online directly from

Samsung.com.

Network Connection - Wireless

Connect the TV to the Internet using a standard wireless router or modem.

Wireless IP Router or Modem

that has a DHCP Server

LAN Cable (Not Supplied)

The LAN Port

on the Wall

Wireless Network Precautions

• This TV supports the IEEE 802.11a/b/g /n communication protocols.

Samsung recommends using IEEE 802.11n. If you use one of the other

communication protocols, when you play video over a network connection,

the video may not play smoothly.

Network Conﬁguration

• To use a wireless network, the TV must be connected to a wireless router

or modem. If the wireless router supports DHCP, the TV can use a DHCP

or static IP address to connect to the wireless network.

• Select a channel that is not currently in use for the wireless router. If the

channel set for the wireless router is currently being used by another

device, the result is usually interference and/or a communications failure.

• Most wireless networks have an optional security system. To enable a

wireless network's security system, you need to create a security key using

characters and numbers, and then enter that key into the router through

its menu. You then must enter this security key into any other devices you

want to connect to the wireless network.

Network Security Protocols

The TV only supports the following wireless network security protocols:

• Authentication Modes: WEP, WPAPSK, WPA2PSK

• Encryption Types: WEP, TKIP, AES

In compliance with the newest Wi-Fi certiﬁcation speciﬁcations, Samsung TVs

do not support WEP or TKIP security encryption in networks running in the

802.11n mode.

If the wireless router supports WPS (Wi-Fi Protected Setup), you can connect

the TV to your network using PBC (Push Button Conﬁguration) or a PIN

(Personal Identiﬁcation Number). WPS automatically conﬁgures the SSID and

WPA key settings.

Your Smart TV cannot connect to uncertiﬁed wireless routers.

English - 16 English - 17

[S9C-ZC]BN68-05356C-03L02.indb 17 2013-10-30 �� 5:01:50

Network Connection - Wired

There are three main ways to connect your TV to your network using cable,

depending on your network setup. They are illustrated below:

The Modem

Port on the Wall

Modem Cable (Not Supplied)LAN Cable (Not Supplied)

One Connect

External Modem

(ADSL / VDSL / Cable TV)

The Modem

Port on the Wall

One Connect

Modem Cable

(Not Supplied)

LAN Cable

(Not Supplied)

LAN Cable

(Not Supplied)

External Modem

(ADSL / VDSL / Cable TV)

IP Router that has

a DHCP Server

One Connect

The LAN Port

on the Wall

LAN Cable (Not Supplied)

✎

The TV does not support network speeds less than or equal to 10Mbps.

✎

Use Cat 7 cable for the connection.

Samsung Multi View

Samsung Multi View is a convenient feature that allows two users who are

both wearing Samsung Multi View 3D Glasses to individually view different

programs on the same TV simultaneously. For example, two viewers can

use the Samsung Multi View feature to each watch a channel of his or her

choosing at the same time. In addition, two users can enjoy the same game

simultaneously on a single screen.

Important: To use Samsung Multi View, you must be wearing a pair of

Samsung Multi View 3D Glasses. See page 20.

English - 18 English - 19

[S9C-ZC]BN68-05356C-03L02.indb 18 2013-10-30 �� 5:01:52

Using Samsung Multi View

To use Samsung Multi View, press and hold the button or select Samsung

Multi View on the virtual remote panel. From the window that pops up, select

either Multi Screen View or 2 Player Gaming.

− With the Do not show again checkbox selected, Samsung Multi View

starts immediately with the already used view. To start Samsung Multi

View with the already used view, press and hold the

button or select

Samsung Multi View on the virtual remote panel.

− To use another view type, choose Samsung Multi View from the menu

(Screen Menu > Picture > Samsung Multi View). Accessing this menu

always brings up the window.

Multi Screen Viewing Mode

1. If two or more users each want to watch a different channel or source, use

Multi Screen View mode.

2. To use Samsung Multi View, press the

button or, alternatively, select

Samsung Multi View on the virtual remote panel.

3. Select Multi Screen View from the pop-up window.

4. Choose the input sources for screens 1 and 2 from the input signal

selection window.

5. Once selections have been made, select Start. The Samsung Multi View

guide screen will appear. Read the guide and then select OK.

✎

To finish watching Samsung Multi View, press the button.

2 Player Gaming Mode

1. To use Samsung Multi View, press the button or, alternatively, select

Samsung Multi View on the virtual remote panel.

2. Select 2 Player Gaming mode from the pop-up window.

3. In the screen split selection window, choose up/down or left/right.

4. Once selections have been made, select Start. The Samsung Multi View

guide screen will appear. Read the guide and then select OK.

✎

To finish watching Samsung Multi View, press the button.

English - 18 English - 19

[S9C-ZC]BN68-05356C-03L02.indb 19 2013-10-30 �� 5:01:52

Samsung Multi View 3D Glasses At a Glance

Liquid-

crystal shutter

Nose pad

Earphones

Screen switch button

Power/pairing button

LED Indicator

Volume control button

✎

The nose pads are adjustable.

✎

To wear the Samsung Multi View 3D Glasses over eyeglasses, detach the

nose pad from the Samsung Multi View 3D Glasses.

✎

Refer to the next page for details on how to attach and detach the nose

pad.

✎

The Samsung Multi View 3D glasses are supplied with pre-installed

medium-sized earphone inserts.

Large-sized and small-sized inserts are supplied in a separate package.

Samsung Multi View 3D Glasses

Features

Samsung Multi View 3D Glasses let you view 3D or Samsung Multi View

videos. To view 3D or Samsung Multi View videos, you must use the Samsung

Multi View 3D Glasses with a Samsung S9C TV. The glasses establish a

connection with the TV using the 2.4GHz or 5GHz RF frequency.

✎

The Samsung Samsung Multi View 3D Glasses do not connect to other

wireless communication devices.

✎

The Samsung Multi View and earphones features are supported only by

the S9C TV released in 2013.

✎

With the D, E and F series Samsung TVs released after 2011, you can use

the glasses as regular 3D glasses without the Samsung Multi View and

earphones feature.

✎

Audio is available through the TV speakers or the earphones on the

glasses during normal 3D viewing and only through the earphones on the

glasses during Multi View/Multi View 3D viewing.

− Speakers can be selected from the TV's menu.

3D Basics

English - 20 English - 21

[S9C-ZC]BN68-05356C-03L02.indb 20 2013-10-30 �� 5:01:53

La page est en cours de chargement...

Samsung KN55S9CAF Guide de démarrage rapide

Samsung KN55S9CAF Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents