ubiolabs WCB262 Le manuel du propriétaire

Taper
Le manuel du propriétaire

Ce manuel convient également à

Wireless Stand Features
SAVE THESE INSTRUCTIONS
Warranty
At Ubio Labs, we are dedicated to designing
and manufacturing products with superior
performance and 100% customer satisfaction.
All of our products come with a 1 year limited
warranty from date of purchase.
We are always improving our products’ features
and functionality. We reserve the right to
change product specifications at any time
without notice.
DO NOT RETURN TO
THE STORE
Our customer service team is here to help.
Model: WCB262 / WCB262E
AWC1109ABV
Important Safety Instructions
Technical Specifications
Technical Specifications
Wall Adapter Features Folding
Wall Prongs
6 ft. Cable
Owner’s Manual and
Safety Instructions
2-in-1 Wireless
Charging Stand
for Mobile Phones and Earbuds
IMPORTANT, RETAIN FOR FUTURE
REFERENCE: READ CAREFULLY
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Caution: The user is cautioned that changes or
modifications not expressly approved by the party
responsible for compliance could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept
any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorie aux deux
conditions suivantes: (1) l'appareil ne doit pas produire
de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le
fonctionnement
The device has been evaluated to meet general RF
exposure requirement. To maintain compliance with
RSS102 — Radio Frequency (RF) Exposure guidelines,
this equipment should be installed and operated with a
minimum distance of 20cm between the radiator and
your body.
Cet équipement est conforme aux limites d'exposition
de rayonnement d'IC RSS-102 déterminées pour un
environnement non contrôlé. Cet équipement devrait
être installé et actionné avec la distance minimum 20
cm entre le radiateur et votre corps.
* A blinking amber LED indicates a foreign object has been
detected (metal objects like keys, coins, magnets, etc.) and
the device is automatically turned o to ensure safety.
Removal of foreign object and proper alignment of phone
will result in normal operation.
Model: CHG1088SGV
Input: 110-240V AC, 50-60 Hz 1.2A
Output: 52.5W, 15V DC, 3.5A
Dimensions: 66 x 66 x 29 mm (2.6 x 2.6 x 1.1 in)
Weight: 95 g (3.35 oz)
www.ubiolabs.com
1-866-642-4428
(Monday - Friday 9am - 4:30pm PST)
2821 Northup Way, Suite 250
Bellevue, WA 98004
1 2
3
4
1 ) USB-C Output
2 ) DC Power In
3 ) Wireless Charging Surfaces
4 ) LED Charge Indicators
Features
Model: AWC1109ABV
Input: 15V, 3.5A
Output (Wireless Charging Stand): 15W/ 10W/ 7.5W/ 5W
Output (Wireless Charging Pad): 5W
Output (USB-C PD 3.0): 5V, 3A/ 9V, 2.22A, 20W
Charge Indicator: White/Amber* LED indicator
Dimensions: 115 x 56 x 99 mm (4.5 x 2.2 x 3.9 in)
Weight: 200g (7.1 oz.)
Your wireless stand is designed to provide optimal power
delivery for your wirless device:
15W Qi certified fast charging for Samsung Galaxy S10e,
Galaxy S10, Galaxy S10+, Galaxy Note9, Galaxy S9+,
Galaxy S9, Galaxy Note8, Galaxy S8+, Galaxy 8, Galaxy S7
Edge, Galaxy S7, Galaxy S6 Edge, Galaxy S6, Galaxy Note
5, Motorola, LG
10W Qi certified fast charging for Samsung Galaxy S6
and later, Samsung Note5 and later, Motorola, LG, iPhone
12, iPhone 11, iPhone Xs Max, iPhone Xs, iPhone XR,
iPhone X, iPhone 8, iPhone 8 Plus
• 7.5W wireless charging for iPhone 8 and later
• 5W Wireless Charging Case for AirPods, AirPods Pro,
and Samsung Galaxy Buds
WCB262/E User Manual
Material 80G woodfree paper
Process: 1c/1c
k=100
  • Page 1 1

ubiolabs WCB262 Le manuel du propriétaire

Taper
Le manuel du propriétaire
Ce manuel convient également à

dans d''autres langues