WilsonPro PRO 1000 Guide d'installation

WILSON PRO

1000

A Wilson Electronics Brand

wilsonpro.com 866.294.1660

User Manual

In-Building Signal Booster

With Extended Dynamic Range

ENGLISH FRANÇAIS

Package Content

1

About The WilsonPro 1000

2

Key Features

4

Competitive Advantages

5

Post Install Setup

7

Status Screen

8

Band Status Screens

10

Safety Guidelines

12

Warranty

18

Index

WILSON PRO 1000 IN-BUILDING SIGNAL BOOSTER

1EN

WilsonPro

1000

2’ Wilson

400

Lightning Surge

Protector

Wide Band Directional

Antenna + 75’

Wilson 400 Cable

Dome Antenna +

100’ Wilson 400 Cable

Kit 460236

Package

Content

IN-BUILDING SIGNAL BOOSTER WILSON PRO 1000

2 EN

Easy Installation

Neat and clean installation while leaving the

unit easily accessible.

Onboard Software For

Better Control

Automatically controlled with onboard

software, ensuring great connectivity

throughout large spaces and multi-story

buildings.

Color LCD For Easier

Access

Unlike other boosters, the WilsonPro

1000 has a color LCD screen with four-

way navigation, allowing integrators to

have easy and e ective control of the

product.

Extended Dynamic

Range For Continuous

Connectivity

XDR allows the booster to never shutdown

due to too strong of a signal. No matter how

strong, the booster will never overpower and

shutdown.

WilsonPro 1000

WILSON PRO 1000 IN-BUILDING SIGNAL BOOSTER

3EN

The WilsonPro 1000 cell signal booster

is Wilson’s ﬂ agship ampliﬁ er system

providing signiﬁ cantly enhanced voice

and data coverage, including 4G LTE,

inside large homes and commercial

buildings where cell signals may not

otherwise penetrate. The result for your

clients are no more dropped calls or lost

connections, faster uploads/downloads and a reliable, up to 32x stronger signal. The

WilsonPro 1000 delivers maximum FCC-allowed downlink power to provide the largest

possible indoor signal coverage.

The WilsonPro 1000 also includes Wilson Electronics’ state-of-the-art XDR (Extra

Dynamic Range) technology that prevents signal overload conditions which can, in

accordance with FCC regulations, force a booster to shut down.

When the WilsonPro 1000 senses that any incoming cell signal is too strong and

threatens to overload the system, XDR automatically reduces signal gain to compensate

for this overload condition while maintaining signal coverage throughout the building. In

contrast, competing signal boosters shut down when they reach a maximum incoming

signal strength threshold, causing the indoor cell signal to drop out. Both antenna ports

are located on the top of the booster unit for easy installation. Like all WilsonPro cell

signal boosters, the WilsonPro 1000 booster system is universal: it works for all cellular

devices, all services including 4G LTE, and all U.S. and Canada cell phone carriers.

The 1000 Delivers Maximum Downlink Power

IN-BUILDING SIGNAL BOOSTER WILSON PRO 1000

4 EN

Simple Wall-Mount Installation: A signal-in and signal-out port are

located on top of the Pro 1000 for easy antenna connections, while an

exposed mounting ﬂ ange at each corner of the booster provides for

simple and clean wall-mount installation.

Onboard Software for Better Control: Booster is automatically

controlled with automatic onboard software, ensuring great

connectivity throughout large spaces and multi-story buildings.

The booster will adjust its gain level up or down as required by the

conditions of the immediate signal environment.

Extended Dynamic Range (XDR) for continuous connectivity: Gives

the 1000 much greater tolerance for a strong incoming signal from the

tower. XDR lets the 1000 system work with an incoming signal stronger

than any competing booster and never shuts down due to a strong

outside signal.

Color LCD for Easier Access: Unlike other boosters, the Wilson 1000

has a color LCD screen with four-way navigation, allowing integrators

to optimize antenna position and maximize the performance of the

booster.

Key Features

WILSON PRO 1000 IN-BUILDING SIGNAL BOOSTER

5EN

Highest Downlink Power: Up to +15dB more downlink power than

the competition allows for stronger signal in environments where the

incoming signal is weak. The beneﬁ t is a stronger signal sent to the

inside antennas, providing larger coverage area from a single booster.

Highest Uplink Power: This allows for a stronger signal transmitted

to the tower, up to +3dB more than the competition, providing greater

user capacity and increased range from the cell site.

Lower Overload and Shutdown Threshold: No matter how strong the

outside signal, the WilsonPro 1000 never shuts down. This is a huge

beneﬁ t in strong signal environments like cities and locations close to

a carrier tower.

Intelligent Control: WilsonPro cellular boosters automatically adjust

signal gain while still providing even signal coverage throughout the

building.

Sophisticated Software: Cellular signals are constantly ﬂ uctuating.

The software is always monitoring signal levels and making immediate

adjustments as needed, allowing the booster to operate at maximum

gain consistently.

Competitive

Advantages

IN-BUILDING SIGNAL BOOSTER WILSON PRO 1000

6 EN

Outside

Directional

Antenna

to power

Lightning

Surge Protector

Inside Dome

Antenna

power

o p

1000

Simple wall-mount

installation.

The direction of the

outside antenna should

be adjusted until the “DL”

bar is maximized.

A Wilson Lightning Surge Protector is recommended for all building installations. Make

sure the protector is installed outside the building at point of entry connected to a

suitable ground and in line between the Outside Antenna and the Signal Booster.

Installation

Diagram

WILSON PRO 1000 IN-BUILDING SIGNAL BOOSTER

7EN

The WilsonPRO 1000 is designed with advanced internal programming, which allows it

to automatically adjust for a variety of conditions, while still boosting weak signals.

Once the AC power cable and antenna cables are connected, turn the unit on by

toggling the power switch located near the AC power receptacle.

Post Install

Setup

IN-BUILDING SIGNAL BOOSTER WILSON PRO 1000

8 EN

The 1000 takes about 20 seconds to boot up. Once boot up is complete, the status

screen will appear, showing the ampliﬁ cation and status of each port and band.

A solid green light

indicates that a band

is operating correctly with maximum

allowable gain.

A solid yellow light indicates band gain

reduction because of an oscillation

condition. Reposition antennas (more

separation between indoor and outdoor

antennas, and pointed in opposite

directions) and reboot (power cycle)

the 1000 for maximum performance.

When adequate separation is achieved,

the yellow lights will return to green

upon reboot. Note that when the light

is yellow, the band is operational;

however, performance is reduced.

System Status Screen

Splash Screen

Lights Description

Status Screen

WILSON PRO 1000 IN-BUILDING SIGNAL BOOSTER

9EN

A red light indicates a band which has

been completely shut down because

of a severe oscillation condition or

repeated oscillation events. Reposition

antennas (more separation between

indoor and outdoor antennas, and

pointed in opposite directions) and

then reboot (power cycle) the 1000

to reactivate the band and maximize

performance. When adequate

separation is achieved, the red light(s)

will return to green upon reboot.

(LIGHTS DESCRIPTION cont.)

IN-BUILDING SIGNAL BOOSTER WILSON PRO 1000

10 EN

This screen provides speciﬁ c band

and port information. Including the

strength of the received uplink and

downlink signal, status details, and

the ampliﬁ er gain.

By pressing enter on a highlighted light,

as shown, a more detailed status screen

will be displayed for the highlighted band.

D-Pad with Enter

button

Status Screen

Close-up

Band Details Screen

Band Status Screens

Green Light

WILSON PRO 1000 IN-BUILDING SIGNAL BOOSTER

11EN

In the presence of a strong outdoor

cell tower signal, the 1000 will reduce

it’s “boost” (Gain) using internal

Automatic Gain Control (AGC). This

gain reduction is necessary to stay

within FCC requirements. When

this occurs, the 1000 has reached

the ‘speed limit’ so this is good!

The outside antenna should always

be adjusted until the “DL” bar is

maximized and “AGC” is indicated, if

possible with a weak outside signal,

this may not be possible.

Band Details Screen

This screen indicates band gain

has been reduced because of the

oscillation condition detected at a

nearby band.

Pressing enter on a highlighted light

with a yellow light (Band 12), as shown,

will display the following...

D-Pad with Enter

button

Status Screen

Close-up

Band Details Screen

(BAND STATUS SCREENS - GREEN LIGHT cont.)

Yellow Light

IN-BUILDING SIGNAL BOOSTER WILSON PRO 1000

12 EN

Warnings

To uphold compliance with network protection standards, all active cellular devices must maintain at

least 6 feet of separation distance from Panel and Dome antennas.

Use only the power supply provided in this package. Use of a non-Wilson Electronics product may

damage your equipment.

The Signal Booster unit is designed for use in an indoor, temperature-controlled environment (less than

100 degrees Fahrenheit). It is not intended for use in attics or similar locations subject to temperatures

in excess of that range.

RF Safety Warning: Any antenna used with this device must be located at least 8 inches from all persons.

AWS Warning: The Outside Antenna must be installed no higher than 10 meters (31’9”) above ground.

This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by weBoost could void the authority to operate this equipment.

FOR MORE INFORMATION ON REGISTERING YOUR SIGNAL BOOSTER WITH YOUR

WIRELESS PROVIDER, PLEASE SEE BELOW:

Sprint: http://www.sprint.com/legal/fcc_boosters.html

T-Mobile/MetroPCS: https://support.t-mobile.com/docs/DOC-9827

Verizon Wireless: http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html

AT&T: https://securec45.securewebsession.com/attsignalbooster.com/

U.S. Cellular: http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp

This is a CONSUMER device.

BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have

your provider’s consent. Most wireless providers consent to the use of signal boosters.

Some providers may not consent to the use of this device on their network. If you are

unsure, contact your provider.

In Canada, BEFORE USE you must meet all requirements set out in ISED CPC-2-1-05.

You MUST operate this device with approved antennas and cables as speciﬁ ed by the

manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from (i.e., MUST NOT

be installed within 20 cm of) any person.

You MUST cease operating this device immediately if requested by the FCC (or ISED in

Canada) or licensed wireless service provider.

WARNING. E911 location information may not be provided or may be inaccurate for calls

served by using this device.

This device may be operated ONLY in a ﬁ xed location (i.e..may operate in a ﬁ xed location

only) for in-building use.

Safety Guidelines

WILSON PRO 1000 IN-BUILDING SIGNAL BOOSTER

13EN

The following accessories are certiﬁ ed by the FCC to be used with the

Wilson PRO 1000.

Inside Antenna Expansion Kit

Kit 309900-50N40090

2 - Wall Panel antennas

1 - 50 ohm 3-Way Splitter

1 - 100' Wilson 400

Kit 309905-50N17420

3 - Wall Panel Antennas

3 - 2-Way 50 Ohm Splitters

20' RG174

Kit 309902-75F0650

2 - Wall Panel Antennas

1 - 3-Way 75Ohm Splitter

50' RG6

Kit 309903-75F1180

3 - Wall Panel Antennas

3 - 2-Way 75Ohm Splitters

80' RG11 cable

Kit 309904-75F5830

1 - Wall Panel Antenna

1 - 2-Way 75 Ohm Splitter

30' RG58 cable

Inside Antenna Kits

Kit 311155-0670

75 Ohm Wall mount Panel Antenna

70’ RG6 Cable

Kit 311135-5840

50 Ohm Wall mount Panel Antenna

40’ RG58 Cable

Kit 311135-400150

50 Ohm Wall mount Panel Antenna

150' Wilson 400

Kit 311155-11120

75 Ohm Wall mount Panel Antenna

10’ RG11 cable

Kit 304412-400100

50 Ohm 4G Dome Antenna

100' Wilson400 cable

Kit 304412-5830

50 Ohm 4G Dome Antenna

30' RG58 cable

Kit 304419-1175

75 Ohm 4G Dome Antenna

75' RG 11 cable

Kit 304419-17450

75 Ohm 4G Dome Antenna

50' RG174 cable

May need separate adapter

Kit 304419-0650

75 Ohm 4G Dome Antenna

50' RG6 cable

50 Ohm Outside Antenna Kits

Kit 314453-5825

50 Ohm Pole Mount Panel Antenna

25’ RG58 Cable

Kit 314411-5825

50 Ohm Wide Band Directional

25’ RG58 Cable

Kit 301111-5850

Yagi Directional Antenna

50’ RG58 Cable

Kit 311203-5820

Omni-Directional antenna

20’ RG58 Cable

Kit 314411-40075

50 Ohm Wide Band Directional

75’ LMR400 Cable

Kit 311203-40020

Omni-Directional antenna

20’ LMR400 Cable

Kit 301111-400170

Yagi Directional w/ N-Female

170’ LMR400

Kit 314453-40075

50 Ohm Pole Mount Panel Antenna

75’ LMR400 Cable

Kit 304422-40020

50 Ohm 4G Omni Antenna

20’ Wilson400 cable

Kit 304422-5810

50 Ohm 4G Omni Antenna

10’ RG58 cable

Kit 304422-1120

50 Ohm 4G Omni Antenna

20’ RG11 cable

May need separate adapter

75 Ohm Outside Antenna Kits

Kit 301111-0675

Yagi Directional Antenna

75’ RG6 Cable

N-Male to F-Female adapter

Kit 311201-0620

Omni Directional w/ F-Female

20’ RG6 Cable

Kit 314473-0640

75 Ohm Pole Mount Panel Antenna

40’ RG6 Cable

Kit 311141-0620

75 Ohm Grey Brick Antenna

20’ RG6 Cable

Kit 301111-11140

Yagi Directional Antenna

140’ RG11 Cable

N-Male to F-Female adapter

Kit 311201-1120

Omni Directional w/ F-Female

20’ RG11 Cable

Kit 314473-1175

75 Ohm Pole Mount Panel Antenna

75’ RG11 Cable

Kit 314475-0630

75 Ohm Wide Band Directional

30’ RG6 Cable

Kit 314475-1175

75 Ohm Wide Band Directional

75’ RG11 Cable

Kit 311141-1120

75 Ohm Grey Brick Antenna

20’ RG11 Cable

Kit 304421-17410

75 Ohm 4G Omni Antenna

10’ RG174 cable

Kit 304421-0610

75 Ohm 4G Omni Antenna

10’ RG6 cable

Kit 304421-5810

75 Ohm 4G Omni Antenna

10’ RG58 cable

May need separate adapter

Kit 304421-1120

75 Ohm 4G Omni Antenna

20’ RG 11 cable

Antenna Kit Options

IN-BUILDING SIGNAL BOOSTER WILSON PRO 1000

14 EN

Product Number 460036

Model Number 460036

FCC ID

PWO460036

IC ID

4726A-460036

Connectors N-Female

Antenna Impedance 50 Ohms

Frequency

698-716 MHz, 729-746 MHz, 746-756 MHz, 777-787 MHz, 824-894 MHz, 1850-1995 MHz,

1710-1755/2110-2155 MHz

Passband Gain (nominal)

700

MHz Band12/17

57.6

700MHz Band13

58.0

800MHz

59.2

1700/2100

MHz

65.7

1900

MHz

65.2

20 dB Bandwidth (MHz)

700

MHz Band12/17 700MHz Band13 800MHz 1700/2100MHz 1900MHz

Typical

Maximum

29.6

35.4

30.3

35.4

36.8

37.8

77.5

81.0

74.5

75.1

Power output for single cell

phone (Uplink) dBm

700

MHz Band12/17 700MHz Band13 800MHz 1700MHz 1900MHz

25.3 25.7 24.5 26.1 25.1

Power output for single cell

phone (Downlink) dBm

700

MHz Band12/17 700MHz Band13 800MHz 2100MHz 1900MHz

15.5 14.9 15.1 15.3 15.4

Power output for multiple

received channels (Uplink) dBm

No. Tones

700

MHz Band12/17 700MHz Band13 800MHz 1700MHz 1900MHz

2 13.0 23.9 20.4 22.4 22.1

3 9.5 20.4 16.9 18.9 18.6

4 7.0 17.9 14.4 16.4 16.1

5 5.0 15.9 12.4 14.4 14.1

6 3.5 14.4 10.9 12.9 12.6

Power output for multiple

received channels

(Downlinklink) dBm

No. Tones 700

MHz Band12/17 700MHz Band13 800MHz 2100MHz 1900MHz

2 16.1 15.2 15.3 12.0 15.3

3 12.6 11.7 11.8 8.5 11.8

4 10.1 9.2 9.3 6.0 9.3

5 8.1 7.2 7.3 4.0 7.3

6 6.6 5.7 5.8 2.5 5.8

Noise Figure 5 dB nominal

Isolation > 90 dB

Power Requirements

12V 3A

The term “IC” before the radio certiﬁ cation number only signiﬁ es that Industry Canada technical speciﬁ cations were met.

Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be

adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter

incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster

is not in use for ﬁ ve minutes, it will reduce gain until a signal is detected. If a detected signal is too high in a frequency

band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power o on that

band. For a detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1

minute. After 5 (ﬁ ve) such automatic restarts, any problematic bands are permanently shut o until the Signal Booster

has been manually restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity

are maintained by the Signal Booster’s microprocessor.

The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple

carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-

radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or

gain reduction and not by an attenuator at the output of the device.

Speciﬁ cations

WILSON PRO 1000 IN-BUILDING SIGNAL BOOSTER

15EN

Notes

IN-BUILDING SIGNAL BOOSTER WILSON PRO 1000

16 EN

Notes

WILSON PRO 1000 IN-BUILDING SIGNAL BOOSTER

17EN

Notes

30 DAY MONEY-BACK GUARANTEE

All WilsonPro products are protected by WilsonPro 30-day money-back guarantee.

If for any reason the performance of any product is not acceptable, simply return

the product directly to the reseller with a dated proof of purchase.

3 YEAR WARRANTY

WilsonPro Boosters are warranted for three (3) years against defects in

workmanship and/or materials. Warranty cases may be resolved by returning the

product directly to the reseller with a dated proof of purchase.

Signal Boosters may also be returned directly to the manufacturer at the

consumer’s expense, with a dated proof of purchase and a Returned Material

Authorization (RMA) number supplied by WilsonPro. WilsonPro shall, at its option,

either repair or replace the product.

This warranty does not apply to any Signal Boosters determined by WilsonPro

to have been subjected to misuse, abuse, neglect, or mishandling that alters or

damages physical or electronic properties.

Replacement products may include refurbished WilsonPro products that have been

recertified to conform with product specifications.

RMA numbers may be obtained by contacting Customer Support.

DISCLAIMER: The information provided by WilsonPro is believed to be complete and

accurate. However, no responsibility is assumed by WilsonPro for any business or

personal losses arising from its use, or for any infringements of patents or other rights

of third parties that may result from its use.

NEED HELP?

support.wilsonpro.com 866.294.1660

Warranty

La page charge ...

WilsonPro PRO 1000 Guide d'installation

WilsonPro PRO 1000 Guide d'installation

dans d''autres langues

Documents connexes

Autres documents