TP-LINK KP125M Kasa Smart WiFi Plug Mode d'emploi
- Taper
- Mode d'emploi
Kasa Smart Wi-Fi Plug www.tp-link.com
DOWNLOAD KASA
Get the Kasa Smart app from
the App Store or Google Play.
STEP 1
Tap the button in the Kasa
app and select Smart Plug.
ADD TO KASA
STEP 2
Let’s get started with your new smart plug.
Heater: ≤1500 W
Humidifier: ≤260 W
Iron: ≤1500 WToaster: ≤850 W
Tower Fan: ≤50 W
Common Load Types:
Follow the app instructions to
complete the setup. *Image may dier from
actual product.
PLUG IN & POWER UP
STEP 3
© 2022 TP-Link
For technical support, the user guide and other information, visit
https: //www.tp-link.com/support.
Support
This is a Matter-certied device. You can integrate it into any
Matter ecosystem you prefer for easy control.
A Matter-supported controller and smart home app of the same
ecosystem are required.
1. Turn on Bluetooth on your phone.
2. Open your selected smart home app and scan the provided
Matter QR code on the plug.
3. Follow the instructions in the app to complete setup.
How to Set Up
Note: Setup processes may vary between ecosystems.
Setting Up with Matter
Failed to Set Up?
1. Try to connect your phone to a stable 2.4 GHz Wi-Fi network
with internet access instead of a 5 GHz network.
2. Unplug your device and plug it back to restart.
3. Refer to the FAQ for detailed instructions:
https://www.tp-link.com/support/faq/3520/
© 2022 TP-Link
FCC compliance information statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1）This device may not cause harmful interference.
2）This device must accept any interference received, including interference that
may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. Such modifications could void
the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is
applicable to only Mobile Configurations. The antennas used for this transmitter
must be installed to provide a separation distance of at least 20 cm from all
persons and must not be co-located or operating in conjunction with any other
antenna or transmitter.”
© 2022 TP-Link
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
1) L’appareil ne doit pas produire de brouillage;
2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC
établies pour un environnement non contrôlé. Cet équipement doit être installé
et utilisé avec un minimum de 20 cm de distance entre la source de
rayonnement et votre corps.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
-
1
-
2
-
3
-
4
TP-LINK KP125M Kasa Smart WiFi Plug Mode d'emploi
- Taper
- Mode d'emploi
dans d''autres langues
Documents connexes
-
TP-LINK HS103P2 Mode d'emploi
-
TP-LINK KC200 Mode d'emploi
-
TP-LINK KC120 Mode d'emploi
-
-
TP-LINK tp-link KP400 Kasa Smart Wi-Fi Outdoor Plug Mode d'emploi
-
-
TP-LINK Deco M5 Mode d'emploi
-
-
-
TP-LINK Deco M4 Mode d'emploi