iHome Himalayan Salt Lamp and Sound Soother Manuel utilisateur

Catégorie
Équipement musical supplémentaire
Taper
Manuel utilisateur
Model: iZH478
Instruction manual - US English
Size: 102 x 150 mm
Date: July 25, 2018
total: 16 pages
Mat’l: 90gsm paper (WF)
Color: Black text on white background
Cover
Warranty
Model: iZH478
Salt Lamp + Sound Therapy
QUESTIONS? visit www.ihome.com
SALT LAMP + SOUND THERAPY
1
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
AVERTISSEMENT: POUR RÉDUIRE LE RISQUE D’INCENDIE OU DE CHOC
ÉLECTRIQUE, NE PAS EXPOSER CET APPAREIL SOUS LA PLUIE ET L’HUMIDITÉ
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
The exclamation point within an equilateral triangle is intended to alert the user of the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user of the presence of uninsulated “dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk electric shock to persons.
CAUTION: To prevent electric shock, do not use this (Polarized) plug with an extension cord receptacle,
or other outlets unless the blades can be fully inserted to prevent blade exposure.
ATTENTION: Pour prévenir les chocs électriques ne pas utiliser cette fiche polarisée avec un
prolongateur. Une prise de courant, ou une autre sortie de courant sauf si les lames peuvent étre
insérées à fond sans en laisser aucune partie à decouvert.
2
DANGER - To reduce the risk of electric shock:
Always unplug this furnishing from the electrical outlet before cleaning.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to
persons:
- Read these Instructions.
- Keep theseInstructions.
- Heed all Warnings.
- Follow all instructions.
- Clean only with a dry cloth.
The unit should not be used near water.
- Heat – The unit should be situated away from heat sources such as radiators,
heat registers, stoves or other appliances (including amplifiers) that produce
heat.
- Power-Cable Protection – Power supply cables should be routed so that they
are not likely to be walked on or pinched by items placed upon or against them.
It is always best to have a clear area from where the cable exits the unit to
where it is plugged into an AC socket.
- Attachments – Do not use attachments not recommended by the product
manufacturer.
- Use this product only for its intended use as described in these instructions. Do
not use attachments not recommended by the manufacturer.
- Never operate this furnishing if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged, or dropped into water.
Return the product to a service center for examination and repair.
- Never operate the furnishing with the air openings blocked. Keep the air
openings free of lint, hair, and the like.
- To disconnect, turn all controls to the o position, then remove plug from outlet.
- Lightning and Power Surge Protection – Unplug the unit from the wall socket
and disconnect the antenna or cable system during a lightning storm or when it
is left unattended and unused for long periods of time. This will prevent damage
to the product due to lightning and power-line surges.
- Do not defeat the safety purpose of the polaried or grounding - type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. When the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
- Unplug from outlet before putting on or taking o parts
- Close supervision is necessary when this furnishing is used by, or near children,
invalids, or disabled persons.
IMPORTANT SAFETY INSTRUCTIIONS
3
- Keep the cord away from heated surfaces.
- Never drop or insert any object into any opening.
- Do not use outdoors.
- Do not operate where aerosol (spray) products are being used or where oxygen
is being administered
- This product is for use on a circuit having a nominal rating 120 volts and is
factory-equipped with specific electric plug to permit connection to a proper
electric circuit. Make sure that the product is connected to an outlet having the
same configuration as the plug. No adapter should be used with this product.
- Damage Requiring Service – The unit should be serviced by qualified service
personnel when:
a. the power supply cable or plug has been damaged.
b. objects have fallen into or liquid has been spilled into the enclosure.
c. the unit has been exposed to rain.
d. the unit has been dropped or the enclosure damaged.
e. the unit exhibits a marked change in performance or does not operate
normally.
- SAVE THESE INSTRUCTIONS
4
The apparatus shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on apparatus.
L'appareil ne doit pas être exposé aux écoulements ou aux éclaboussures
et aucun objet ne contenant de liquide, tel qu'un vase, ne doit être placé
sur l'objet.
Main plug is used as disconnect device and it should remain readily operable
during intended use. In order to disconnect the apparatus from the mains
completely, the mains plug should be disconnected from the mains socket
outlet completely.
La prise du secteur ne doit pas être obstruée ou doit être facilement
accessible pendant son utilisation. Pour être complètement déconnecté
de l'alimentation d'entrée, la prise doit être débranchée du secteur.
Minimum distances 10 cm around the apparatus for sucient ventilations.
10 cm de distance minimale autour de l’appareil pour une ventilation
susante.
The ventilation should not be impeded by covering the ventilation openings
with items such as newspaper, table-cloths, curtains etc.
Ne pas recouvrir les entrées de’aérations avec des objets tel qu’un journal,
une nappe, un rideau, etc....
No naked flame sources such as lighted candles should be placed on teh
apparatus.
Aucune source de flamme nue, tel qu’une bougie, ne doit être placée sur
l’appareil.
The apparatus should only be used in moderate climates.
El aparato debe usarse en climas moderados.
The marking information is located at the top of apparatus.
Les marquages sont inscrits en haut de l'appareil.
Read all instructions before using
CAUTION: RISK OF FIRE - USE 15 WATT
OR SMALLER, 120 VOLT, TYPE C LAMP
ATTENTION: RISQUE D’INCENDIE -
UTILISER EXCLUSIVEMENT DES
LAMPES DE CLASSE C DE 15 WATTS
FOR HOUSEHOLD / RESIDENTIAL USE
ONLY
POUR L’USAGE À LA MASISON
/UTILISATION RÉSIDENTIELLE
SEULEMENT
DISCONNECT POWER CORD BEFORE
CLEANING
DÉBRANCHER LE CORDON
D’ALIMENTATION AVANT LE
NETTOYAGE
5
WELCOME
GETTING STARTED
1. iZH478 speaker base
2. iZH478 salt crystal
Thank you for choosing the iZH478 Zenergy Salt Lamp from iHome. This
user guide will get you up and running quickly. For more information
about this and other iHome products, please visit www.ihome.com
This unit ships with the following items. Please check to see that all
items are present.
1. iZH478 speaker base
2. iZH478 salt crystal
3. Protective coaster
4. 15 watt bulb
3. Coaster 4. 15 Watt bulb
6
SETTING UP YOUR LAMP
Remove all items from packaging. Remove shrink wrap from Salt Crystal
and discard properly. Set Salt Crystal and coaster aside nearby.
1. Remove 15 Watt bulb from
box and insert into lamp by
screwing right (clockwise).
2. Firmly hold Salt Crystal
upside down. Insert the lamp
base into the Salt Crystal,
making sure to align the
posts on the lamp base with
the locking plate on the
Crystal. Twist the lamp base
clockwise to lock into place.
3. After the salt crystal fixed on
the lamp base, turn the
complete unit upside down
(The lamp base located at
the bottom) and places the
lamp base on the protective
coaster.
CONNECTING THE IZH478
Plug the iZH478 into a working outlet not controlled by a light switch.
Plug the iZH478 into a
working outlet not
controlled by a light
switch.
Salt Crystal
Crystal
base
locking
plate
Protective coaster
Lamp base
NOTE: Polarization instruction.
TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO
WIDE SLOT
POUR EVITER LES CHOCS
ELECTRIQUES, INTRODUIRE LA LAME
LA PLUS LARGE DE LA FICHE DANS
LA FENTE LA PLUS LARGE
To reduce the risk of electric shock,
this furnishing has a polarized plug
(one blade is wider than the other).
This plug will fit in a polarized outlet
only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified
electrician to install the proper outlet.
Do not change the plug in any way.
7
Sound Therapy
Mode Button
Sleep and Sunrise
Mode Indicator
Lights
BACK PANEL
CONNECTING THE IZH478
(Salt Crystal not shown)
FRONT PANEL
Power On/O/Sleep Presets Button
Sleep Timer
Mode Button
Sunrise Timer
Mode Button
Light Control
Button
Power cord
Volume
Buttons
SOUND THERAPY MODE
Distracting noises or a racing mind can make it hard to sleep at night or
focus during the day. Sound Therapy uses specially recorded and engineered
sounds to cancel out these distractions and allow your mind to calm.
1. Press the Sound Therapy Button to access Sound Therapy mode.
Continue to press to cycle to each mode:
4-7-8 Breathing Guide 4-7-8 breathing meditation features a soothing voice guide
and resonating tones to help slow your breath, lower your
heart rate, and calm your body and mind
Calming Meditation Deep, resonating tones and continuous flowing waves
mimic the mind and breath of relaxing meditation.
Zen A tonal melody in frequencies that mimic the Delta
brainwaves of a mind in meditation or healing
Dream A tonal melody in frequencies that mimic the Theta
brainwaves of a mind dreaming in REM sleep
Ocean Authentic, digitally recorded ocean sounds
Storm Authentic, digitally recorded storm and rainfall sounds
Nature Authentic, digitally recorded springtime woodland sounds
Air A low-toned noise frequency, like a fan, which helps to
mue background noises to promote relaxation and sleep
Focus A medium-toned pink noise frequency, like a waterfall,
which helps to promote concentration
Quiet A high toned white noise frequency, like radio static, which
helps to negate distracting environmental noises
O Turn Sound Therapy OFF
2. Press and release the or + Volume Buttons to adjust speaker
volume.
3. Press and hold the Sound Therapy Button for 2 seconds to exit sound
therapy mode. Press the Sound Therapy Button again to resume at the
last used sound preset.
8
9
LIGHT CONTROL
1. Press the Light Control Button to turn lamp on. Press as needed to
adjust brightness levels. Settings are high, medium, low and o.
MEDITATION & BREATHING
Research has shown that active breathing can calm the nervous system
thereby reducing your heart rate and activating the parasympathetic
(calming) nervous system to improve memory, positively impact emotional
behaviors to help cope with stress, anxiety and make it easier to fall asleep.
4-7-8 BREATHING GUIDE
4-7-8 breathing meditation features a soothing voiced guide that fades and
synchronizes with pulsing lighting eects to control your breath, lower your
heart rate and soothe the body and mind.
4 sec Breathe in through your nose, filling the belly.
7 sec Hold breath.
8 sec Slowly exhale through your mouth.
Repeat.
CALMING BREATHING
Frequencies mimicking the delta brainwaves along with a calming
breathing sound eect can help coax our minds into a deep meditative
state. This is a great alternative and easier exercise to the 4-7-8 method.
5 sec Breathe in slowly through your nose.
5 sec Exhale slowly through your mouth.
Repeat.
SLEEP TIMER MODE
The programmable sleep timer mode lets you set any combination of light
and sound therapy for a set duration. The light and sound levels will
gradually decrease over the last 15 minutes (fade begins right away if
timer is set to 10 minutes or less) until the unit shuts o.
Press the Sleep Timer Button as needed to cycle to the desired timer
duration: 5 hours, 90, 60, 30, 20, 10, 5, 2 minutes or o. Sleep mode is first
indicated by a voice guide and the timer indicator light above the Sleep
button. Green indicates more than 60 minutes remaining, yellow indicates
10-59 minutes remaining and red indicates 10 minutes or less remaining.
Press and hold the Sleep Timer Button for 2 seconds to cancel timer
mode. Timer mode is inactive when no timer indicator is lit. A voice will
announce “Sleep timer o”.
SUNRISE TIMER MODE
The programmable sunrise timer mode lets you wake to the light after a
set time interval. The light level will gradually increase over the last 10
minutes until the unit shuts o.
Press the Sunrise Timer Button as needed to cycle to the desired interval
duration: 6 hours, 6 and half hours, 7 hours, 7 and a half hours, 8 hours, 8
and a half hours, 9 hours, or o. Sunrise mode is first indicated by a voice
guide and the timer indicator light above the Sunrise button. Green
indicates more than 60 minutes remaining, yellow indicates 10-59 minutes
remaining and red indicates 10 minutes or less remaining.
Press and hold the Sunrise Timer Button for 2 seconds to cancel Sunrise
mode. Sunrise mode is inactive when no Sunrise indicator is lit. A voice will
announce “Sunrise timer o”.
USING SLEEP PRESETS
To save the current sleep settings (selected sound therapy mode, sleep
timer, volume and light brightness settings), press and hold the Power
Button for 5 seconds. Press and hold the Power Button for 2 seconds to
activate preset.
10
LIGHT CONTROL
1. Press the Light Control Button to turn lamp on. Press as needed to
adjust brightness levels. Settings are high, medium, low and o.
MEDITATION & BREATHING
Research has shown that active breathing can calm the nervous system
thereby reducing your heart rate and activating the parasympathetic
(calming) nervous system to improve memory, positively impact emotional
behaviors to help cope with stress, anxiety and make it easier to fall asleep.
4-7-8 BREATHING GUIDE
4-7-8 breathing meditation features a soothing voiced guide that fades and
synchronizes with pulsing lighting eects to control your breath, lower your
heart rate and soothe the body and mind.
4 sec Breathe in through your nose, filling the belly.
7 sec Hold breath.
8 sec Slowly exhale through your mouth.
Repeat.
CALMING BREATHING
Frequencies mimicking the delta brainwaves along with a calming
breathing sound eect can help coax our minds into a deep meditative
state. This is a great alternative and easier exercise to the 4-7-8 method.
5 sec Breathe in slowly through your nose.
5 sec Exhale slowly through your mouth.
Repeat.
MAINTENANCE & CARE INSTRUCTIONS
CARE INSTRUCTIONS
Salt crystals can pull moisture from the air, resulting in condensation. A cloth or
other protective material should be placed between the lamp and the furniture.
Place the unit on a sturdy, level surface that can withstand the weight of the salt
crystal.
• Place away from sources of excessive heat or cold.
• Avoid getting the Himalayan salt crystal wet. Do not place or leave the
lamp in extremely damp rooms or outdoors.
Dry the Lamp promptly when wet. You can use a soft cloth to wipe away excessive
water build-up, or simply switch the lamp on so that the warmth of the light dries
it. If moisture persists, place the Lamp in direct sunlight for several hours until it
completely dries.
• Use a candle lamp bulb with screw-on bases (Type E12) with a wattage not to
exceed 15 watts as a replacement only. Light bulbs with wattage of more than
15 can heat the lamps too much.
CLEANING INSTRUCTIONS
Clean the base of the unit with a soft cloth moistened only with warm water.
Stronger cleaning agents such as thinner or similar materials can damage the
surface of the unit. The coaster can be removed and rinsed in sink as needed.
• Use a moistened dishcloth to remove dirt or dust build-up from the salt crystal,
then allow the lamp to dry by the means mentioned above.
STORAGE INSTRUCTIONS
To store salt crystal, remove from base and place in a sealable air-tight
plastic bag.
To take care of cord not damage. Use original package to store the furnishing.
WARNINGS
Breakable - handle with care.
Keep out of reach of children and pets.
Not edible.
Always turn o and unplug the lamp before changing the lightbulb.
The Salt Lamp is packaged with 2 silica gel packs to keep it dry during transit.
Please discard properly.
• This product is not a medical device and is not intended to diagnose, treat, cure,
or prevent any disease.
11
FCC INFORMATION
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
12
This device complies with Part 15 of the FCC Rules, operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
13
SERVICING OF DOUBLE-
INSULATED PRODUCTS
In a double-insulated product, two systems of insula-
tion are provided instead of grounding. No grounding
means is provided on a double-insulated product, nor
is a means for grounding to be added to the product.
Servicing a double-insulated product requires extreme
care and knowledge of the system, and is to be done
only by qualified service personnel. Replacement parts
for a double-insulated product must be identical to the
parts they replace. A double-insulated product is
marked with the words “DOUBLE INSULATION” or
DOUBLE INSULATED.” The symbol is also able to
be marked on the product.
LIMITED 1 YEAR WARRANTY
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI),
warrants this product to be free from defects in workmanship and materials, under
normal use and conditions, for a period of one (1) year from the date of original
purchase.
Should this product fail to function in a satisfactory manner, it is best to first return
it to the store where it was originally purchased. Should this fail to resolve the
matter and service still be required by reason of any defect or malfunction during
the warranty period, SDI will repair or, at its discretion, replace this product
without charge. This decision is subject to verification of the defect or malfunction
upon delivery of this product to the Factory Service Center authorized by
Customer Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a
Return Authorization Number and shipping instructions. A copy of the sales
receipt is required to validate in-warranty coverage.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which
it was designed. It does not cover (i) products which have been damaged by
negligence or willful actions, misuse or accident, or which have been modified or
repaired by unauthorized persons; (ii) cracked or broken cabinets, or units
damaged by excessive heat; (iii) damage to digital media players, CD’s or tape
cassettes (if applicable); (iv) the cost of shipping this product to the Factory
Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to
owners of the product other than to the original purchaser. In no event will SDI or
any of its aliates, contractors, resellers, their ocers, directors, shareholders,
members or agents be liable to you or any third party for any consequential or
incidental damages, any lost profits, actual, exemplary or punitive damages.
(Some states do not allow limitations on implied warranties or exclusion of
consequential damages, so these restrictions may not apply to you.) This warranty
gives you specific legal rights, and you may also have other rights which vary from
state to state.
Your acknowledgment and agreement to fully and completely abide by the above
mentioned disclaimer of warranty is contractually binding to you upon your
transfer of currency (money order, cashier's check, or credit card) for purchase of
your SDI product.
© 2018 SDI Technologies, Inc. All rights reserved
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
iZH478-180725-A (EN) Printed in China
DATE CODE: J8A0
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

iHome Himalayan Salt Lamp and Sound Soother Manuel utilisateur

Catégorie
Équipement musical supplémentaire
Taper
Manuel utilisateur