Kenwood KDC-BT640U Le manuel du propriétaire

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

KDC-BT640U

KDC-BT440U

CD-RECEIVER

INSTRUCTION MANUAL

AUTORADIO CD

MODE D’EMPLOI

CD-RECEIVER

BEDIENUNGSANLEITUNG

CD-RECEIVER

GEBRUIKSAANWIJZING

JS_KWD_KDC_BT640U_EN_C10a.indd 1JS_KWD_KDC_BT640U_EN_C10a.indd 1 17/10/2019 2:34:35 PM17/10/2019 2:34:35 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

i

Informatie over het weggooien van elektrische en elektronische apparatuur en batterijen

(particulieren)

Dit symbool geeft aan dat gebruikte elektrische, elektronische producten en batterijen niet bij het normale

huishoudelijke afval mogen.

Lever deze producten in bij de aangewezen inzamelingspunten, waar ze gratis worden geaccepteerd en op

de juiste manier worden verwerkt, teruggewonnen en hergebruikt.

Voor inleveradressen zie www.nvmp.nl, www.ictmilieu.nl, www.stibat.nl. Wanneer u dit product op de

juiste manier als afval inlevert, spaart u waardevolle hulpbronnen en voorkomt u potentiële negatieve

gevolgen voor de volksgezondheid en het milieu, die anders kunnen ontstaan door een onjuiste verwerking

van afval.

Opgelet: Het teken “Pb” onder het teken van de batterijen geeft aan dat deze batterij lood bevat.

For Israel

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable

for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.

Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling

these items and their waste byproducts.

Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and

waste disposal will help conserve resources whilst preventing detrimental effects on our health and the

environment.

Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Information sur l’élimination des anciens équipements électriques et électroniques et piles

électriques (applicable dans les pays qui ont adopté des systèmes de collecte sélective)

Les produits et piles électriques sur lesquels le pictogramme (poubelle barrée) est apposé ne peuvent pas

être éliminés comme ordures ménagères.

Les anciens équipements électriques et électroniques et piles électriques doivent être recyclés sur des sites

capables de traiter ces produits et leurs déchets.

Contactez vos autorités locales pour connaître le site de recyclage le plus proche. Un recyclage adapté et

l’élimination des déchets aideront à conserver les ressources et à nous préserver des leurs effets nocifs sur

notre santé et sur l’environnement.

Remarque: Le symbole “Pb“ ci-dessous sur des piles électrique indique que cette pile contient du plomb.

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien

(anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf hin, dass

dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf, sondern an einer Annahmestelle

für das Recycling von elektrischen und elektronischen Geräten und batterien abgegeben werden muss.

Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und die

Gesundheit Ihrer Mitmenschen.

Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere Informationen

über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den kommunalen

Entsorgungsbetrieben.

Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei enthalt.

JS_KWD_KDC_BT640U_EN_C00.indd iJS_KWD_KDC_BT640U_EN_C00.indd i 7/11/2019 11:56:19 AM7/11/2019 11:56:19 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

ii

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that have been

classified as Class1. It means that the unit is utilizing laser beams that are of a weaker class. There is no

danger of hazardous radiation outside the unit.

Marquage des produits utilisant un laser

L’étiquette est attachée au châssis/boîtier de l’appareil et indique que l’appareil utilise des rayons laser

de classe 1. Cela signifie que l’appareil utilise des rayons laser d’une classe faible. Il n’y a pas de danger de

radiation accidentelle hors de l’appareil.

Kennzeichnung von Geräten mit Laser-Abtastern

Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente Laserstrahlen

bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf hin, dass sich das Gerät

Laserstrahlen bedient, die einer schwächeren Klasse angehören. Das bedeutet, dass durch den sehr

schwachen Laserstrahl keine Gefahr durch gefährliche Strahlungen außerhalb des Geräts besteht.

Markering op produkten die laserstralen gebruiken

Dit label is aangebracht op de behuizing/houder en toont dat de component een laserstraal gebruikt die

als Klasse 1 is geclassificeerd. Dit betekent dat de laserstraal relatief zwak is en er geen gevaar van straling

buiten het toestel is.

SOFTWARE LICENSE AGREEMENT

The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is

copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions

which Users shall follow in order to use the Licensed Software.

The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.

This Agreement shall be deemed completed at the time the User (hereinafter the "User") initially used the

Product in which the "Licensed Software" is embedded.

The Licensed Software may include the software which has been licensed to the Licensor directly or

indirectly from any third party. In such case, some third parties require the Users to follow their conditions

for use separately from this Software License Agreement. Such software shall not be subject to this

Agreement, and the Users are urged to read the "Important Notice concerning the Software" to be provided

separately below.

Article 1 General Provision

The Licensor shall grant to the User a non-exclusive and non-transferable (other than the exceptional case

referred to in Article 3, Paragraph 1) licensed to use the Licensed Software within the country of the User.

(the country where the User bought the Product (hereinafter the "Country")

Article 2 License

1. The license granted under this Agreement shall be the right to use the Licensed Software in the

Product.

2. The User shall not duplicate, copy, modify, add, translate or otherwise alter, or lease the Licensed

Software and any related documents, whether in whole or in part.

3. The use of the Licensed Software shall be limited to personal purpose, and the Licensed Software shall

not be distributed, licensed or sub-licensed whether it is for commercial purpose or not.

4. The User shall use the Licensed Software according to the directions described in the operation

manual or help file, and is prohibited to use or duplicate any data in a manner violating the Copyright

Law or any other laws and regulations by applying whole or a part of the Licensed Software.

Article 3 Conditions for Grant of License

1. When the User transfers the Product, it may also transfer the license to use the Licensed Software

embedded in the Product (including any related materials, updates and upgrades) on condition that

no original, copies or related materials continue in the possession of the User, and that the User shall

cause the transferee to comply with this Software License Agreement.

2. The User shall not carry out reverse engineering, disassembling, decompiling or any other code

analysis works in connection with the Licensed Software.

JS_KWD_KDC_BT640U_EN_C00.indd iiJS_KWD_KDC_BT640U_EN_C00.indd ii 7/11/2019 11:56:19 AM7/11/2019 11:56:19 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

iii

Article 4 Right pertaining to the Licensed Software

Any and all copyrights and other rights pertaining to the Licensed Software and related documents

shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or

sublicense for the Licensed Software (hereinafter the "Original Rightholder"), and the User shall not be

entitled to any right other than the license granted hereunder, in respect of the Licensed Software and any

related documents.

Article 5 Indemnification of Licensor

1. Neither the Licensor nor the Original Rightholder shall be liable for any damage incurred by the User

or any third party due to the exercise of the license granted to the User under this Agreement, unless

otherwise restricted by law.

2. The Licensor will offer no guarantee for the merchantability, convertibility and consistency with

certain objective of the Licensed Software.

Article 6 Liability to Third Party

If any dispute has arisen with any third party due to an infringement upon a copyright, patent or any

other intellectual property right that was caused by the User's use of the Licensed Software, the User shall

settle such dispute at its own cost and hold the Licensor and the Original Rightholder harmless from any

inconvenience it may cause.

Article 7 Confidentiality

The User shall keep the confidentiality of such portion of the Licensed Software, related documents thereof

or any other information to be granted under this Agreement, as well as the conditions of this Agreement

as has not yet entered the public domain, and shall not disclose or divulge the same to any third party

without approval of the Licensor.

Article 8 Termination

In case the User falls under any of the events described in the following items, the Licensor may

immediately terminate this Agreement or claim that the User compensates for the damage incurred by the

Licensor due to such event:

(1) when the User violated any provision of this Agreement; or

(2) when a petition has been filed against the User for an attachment, provisional attachment,

provisional disposition or any other compulsory execution.

Article 9 Destruction of the Licensed Software

If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed

Software, any related documents and copies thereof within two (2) weeks from such date of termination.

Article 10 Protection of Copyright

1. The copyright and all the other intellectual property rights relating to the Licensed Software

shall belong to the Licensor and the Original Rightholder, and in no event shall they be under the

ownership of the User.

2. The User shall, whenever it uses the Licensed Software, comply with any laws relating to the

copyright and other intellectual property rights.

Article 11 Export Restriction

1. It is prohibited to export the Licensed Software and any related documents outside the country

of the User (including transmission thereof outside the country of the User via Internet of other

communication tools).

2. The User shall understand that the Licensed Software shall be subject to the export restrictions

adopted by the country of User and any other countries.

3. The User shall agree that the software will be subject to any and all applicable international and

domestic laws (including the export control regulation of the country of User and any other countries,

and any restrictions concerning the end-users, the use by end-users and importing countries to be

provided by the country of User and any other countries, and any other governmental authorities).

Article 12 Miscellaneous

1. In the event any part of this Agreement is invalidated by operation of law, the residual provisions

shall continue in force.

2. Matters not stipulated in this Agreement or any ambiguity or question raised in the construction of

this Agreement shall be provided or settled upon good-faith consultation between the Licensor and

the User.

3. The Licensor and the User hereby agree that this Agreement is governed by the laws of Japan, and

any dispute arising from, and relating to the rights and obligations under, this Agreement shall be

submitted to the exclusive jurisdiction of the Tokyo District Court for its first instance.

JS_KWD_KDC_BT640U_EN_C00.indd iiiJS_KWD_KDC_BT640U_EN_C00.indd iii 7/11/2019 11:56:19 AM7/11/2019 11:56:19 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

iv

Important Notice concerning the Software

-jansson

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated

documentation files (the "Software"), to deal in the Software without restriction, including without

limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the

Software, and to permit persons to whom the Software is furnished to do so, subject to the following

conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions

of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE

AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY

CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.

-cJSON

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated

documentation files (the "Software"), to deal in the Software without restriction, including without

limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the

Software, and to permit persons to whom the Software is furnished to do so, subject to the following

conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions

of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE

AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY

CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.

-CMP

The MIT License (MIT)

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated

documentation files (the "Software"), to deal in the Software without restriction, including without

limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the

Software, and to permit persons to whom the Software is furnished to do so, subject to the following

conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions

of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE

AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY

CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.

nanopb

This software is provided 'as-is', without any express or implied warranty. In no event will the authors be

held liable for any damages arising from the use of this software.

Permission is granted to anyone to use this software for any purpose, including commercial applications,

and to alter it and redistribute it freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote

the original software. If you use this software in a product, an acknowledgment in the product

documentation would be appreciated but is not required.

2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the

original software.

3. This notice may not be removed or altered from any source distribution.

JS_KWD_KDC_BT640U_EN_C10a.indd ivJS_KWD_KDC_BT640U_EN_C10a.indd iv 17/10/2019 2:34:25 PM17/10/2019 2:34:25 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

v

sha2

AUTHOR: Aaron D. Gifford - http://www.aarongifford.com/

You may obtain a copy of the license at

https://opensource.org/licenses/BSD-3-Clause

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE

AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY

CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.

Posix

Redistribution and use in source and binary forms, with or without modification, are permitted provided

that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the

following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and

the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following

acknowledgement:

This product includes software developed by the University of California, Berkeley and its contributors.

4. Neither the name of the University nor the names of its contributors may be used to endorse or

promote products derived from this software without specific prior written permission.

Developed at SunPro, a Sun Microsystems, Inc. business.

Permission to use, copy, modify, and distribute this software is freely granted, provided that this notice is

preserved.

License to copy and use this software is granted provided that it is identified as the “RSA Data Security, Inc.

MD4 Message-Digest Algorithm” in all material mentioning or referencing this software or this function.

Author: Chris G. Demetriou

Permission to use, copy, modify and distribute this software and its documentation is hereby granted,

provided that both the copyright notice and this permission notice appear in all copies of the software,

derivative works or modified versions, and any portions thereof, and that both notices appear in supporting

documentation.

CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" CONDITION. CARNEGIE MELLON

DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF

THIS SOFTWARE.

Carnegie Mellon requests users of this software to return to

Software Distribution Coordinator or [email protected]

School of Computer Science

Carnegie Mellon University

Pittsburgh PA 15213-3890

any improvements or extensions that they make and grant Carnegie the rights to redistribute these

changes.

License is also granted to make and use derivative works provided that such works are identified as

"derived from the RSA Data Security, Inc. MD4 Message-Digest Algorithm" in all material mentioning or

referencing the derived work.

RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or

the suitability of this software for any particular purpose. It is provided "as is" without express or implied

warranty of any kind.

You may redistribute unmodified or modified versions of this source code provided that the above

copyright notice and this and the following conditions are retained.

This software is provided ``as is'', and comes with no warranties of any kind. I shall in no event be liable for

anything that happens to anyone/anything when using this software.

These notices must be retained in any copies of any part of this documentation

and/or software.

JS_KWD_KDC_BT640U_EN_C10a.indd vJS_KWD_KDC_BT640U_EN_C10a.indd v 17/10/2019 2:34:27 PM17/10/2019 2:34:27 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

vi

T-Kernel 2.0

This product uses the source code of T-Kernel 2.0 under T-License 2.0 granted by T-Engine Forum

(www.tron.org)

BSD-3-Clause

You may obtain a copy of the license at

https://opensource.org/licenses/BSD-3-Clause

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE

AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY

CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.

LFS Subsystem

You may obtain a copy of the license at

https://directory.fsf.org/wiki/License:BSD-4-Clause

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE

AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY

CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.

Accordo2 Player

Apache License

Licensed under the Apache License,

Version 2.0, January 2004(the "License");

You may obtain a copy of the license at

http://www.apache.org/licenses/LICENSE-2.0

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE

AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY

CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.

JS_KWD_KDC_BT640U_EN_C10a.indd viJS_KWD_KDC_BT640U_EN_C10a.indd vi 17/10/2019 2:34:27 PM17/10/2019 2:34:27 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

vii

Declaration of Conformity with regard to the RE Directive 2014/53/EU

Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

Manufacturer:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU Representative:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Déclaration de conformité se rapportant à la directive RE 2014/53/EU

Déclaration de conformité se rapportant à la directive RoHS 2011/65/EU

Fabricant:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Représentants dans l’UE:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Konformitätserklärung in Bezug auf die RE-Vorschrift 2014/53/EU

Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU

Hersteller:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU-Vertreter:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande

Conformiteitsverklaring met betrekking tot de RE-richtlijn van de Europese Unie

(2014/53/EU)

Conformiteitsverklaring met betrekking tot de RoHS richtlijn van de Europese

Unie (2011/65/EU)

Fabrikant:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU-vertegenwoordiger:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, Nederland

English

Hereby, JVCKENWOOD declares that the radio equipment

“KDC-BT640U/KDC-BT440U” is in compliance with

Directive 2014/53/EU.

The full text of the EU declaration of conformity is available

at the following internet address:

http://www.kenwood.com/cs/ce/eudoc/

Français

Par la présente, JVCKENWOOD déclare que l’équipement

radio « KDC-BT640U/KDC-BT440U » est conforme à la

directive 2014/53/UE.

L’intégralité de la déclaration de conformité UE est

disponible à l’adresse Internet suivante :

http://www.kenwood.com/cs/ce/eudoc/

Deutsch

Hiermit erklärt JVCKENWOOD, dass das Funkgerät

“KDC-BT640U/KDC-BT440U” der Richtlinie 2014/53/EU

entspricht.

Der volle Text der EU-Konformitätserklärung steht unter

der folgenden Internetadresse zur Verfügung:

http://www.kenwood.com/cs/ce/eudoc/

Nederlands

Hierbij verklaart JVCKENWOOD dat de radioapparatuur

“KDC-BT640U/KDC-BT440U” in overeenstemming is met

Richtlijn 2014/53/EU.

De volledige tekst van de EU-verklaring van

overeenstemming is te vinden op het volgende

internetadres:

http://www.kenwood.com/cs/ce/eudoc/

Italiano

Con la presente, JVCKENWOOD dichiara che l΄apparecchio

radio “KDC-BT640U/KDC-BT440U” è conforme alla Direttiva

2014/53/UE.

Il testo integrale della dichiarazione di conformità UE è

disponibile al seguente indirizzo internet:

http://www.kenwood.com/cs/ce/eudoc/

Español

Por la presente, JVCKENWOOD declara que el equipo de

radio “KDC-BT640U/KDC-BT440U” cumple la Directiva

2014/53/EU.

El texto completo de la declaración de conformidad con la

UE está disponible en la siguiente dirección de internet:

http://www.kenwood.com/cs/ce/eudoc/

Português

Deste modo, a JVCKENWOOD declara que o equipamento

de rádio “KDC-BT640U/KDC-BT440U” está em

conformidade com a Diretiva 2014/53/UE.

O texto integral da declaração de conformidade da UE está

disponível no seguinte endereço de internet:

http://www.kenwood.com/cs/ce/eudoc/

Polska

Niniejszym, JVCKENWOOD deklaruje, że sprzęt radiowy

“KDC-BT640U/KDC-BT440U” jest zgodny z dyrektywą

2014/53/UE.

Pełny tekst deklaracji zgodności EU jest dostępny pod

adresem:

http://www.kenwood.com/cs/ce/eudoc/

Český

Společnost JVCKENWOOD tímto prohlašuje, že rádiové

zařízení “KDC-BT640U/KDC-BT440U” splňuje podmínky

směrnice 2014/53/EU.

Plný text EU prohlášení o shodě je dostupný na následující

internetové adrese:

http://www.kenwood.com/cs/ce/eudoc/

Magyar

JVCKENWOOD ezennel kijelenti, hogy a

„KDC-BT640U/KDC-BT440U“ rádióberendezés megfelel a

2014/53/EU irányelvnek.

Az EU konformitási nyilatkozat teljes szövege az alábbi

weboldalon érhető el:

http://www.kenwood.com/cs/ce/eudoc/

JS_KWD_KDC_BT640U_EN_C10a.indd viiJS_KWD_KDC_BT640U_EN_C10a.indd vii 17/10/2019 2:34:27 PM17/10/2019 2:34:27 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

viii

Svenska

Härmed försäkrar JVCKENWOOD att

radioutrustningen “KDC-BT640U/KDC-BT440U” är i

enlighet med direktiv 2014/53/EU.

Den fullständiga texten av EU-försäkran

om överensstämmelse finns på följande

Internetadress:

http://www.kenwood.com/cs/ce/eudoc/

Suomi

JVCKENWOOD julistaa täten, että radiolaite

“KDC-BT640U/KDC-BT440U” on direktiivin

2014/53/EU mukainen.

EU-vaatimustenmukaisuusvakuutusvaatimus

löytyy kokonaisuudessaan seuraavasta internet-

osoitteesta:

http://www.kenwood.com/cs/ce/eudoc/

Slovensko

S tem JVCKENWOOD izjavlja, da je radijska oprema

» KDC-BT640U/KDC-BT440U « v skladu z Direktivo

2014/53/EU.

Celotno besedilo direktive EU o skladnosti je

dostopno na tem spletnem naslovu:

http://www.kenwood.com/cs/ce/eudoc/

Slovensky

Spoločnosť JVCKENWOOD týmto vyhlasuje, že

rádiové zariadenie „KDC-BT640U/KDC-BT440U“

vyhovuje smernici 2014/53/EÚ.

Celý text EÚ vyhlásenia o zhode nájdete na

nasledovnej internetovej adrese:

http://www.kenwood.com/cs/ce/eudoc/

Dansk

Herved erklærer JVCKENWOOD, at

radioudstyret “KDC-BT640U/KDC-BT440U” er i

overensstemmelse med Direktiv 2014/53/EU.

EU-overensstemmelseserklæringens fulde ordlyd

er tilgængelig på følgende internetadresse:

http://www.kenwood.com/cs/ce/eudoc/

Ελληνικά

Με το παρόν, η JVCKENWOOD δηλώνει ότι ο

ραδιοεξοπλισμός «KDC-BT640U/KDC-BT440U»

συμμορφώνεται με την Οδηγία 2014/53/ΕΕ.

Το πλήρες κείμενο της δήλωσης συμμόρφωσης

της ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση

στο διαδίκτυο:

http://www.kenwood.com/cs/ce/eudoc/

Eesti

Käesolevaga JVCKENWOOD kinnitab, et

„KDC-BT640U/KDC-BT440U“ raadiovarustus on

vastavuses direktiiviga 2014/53/EL.

ELi vastavusdeklaratsiooni terviktekst on

kättesaadav järgmisel internetiaadressil:

http://www.kenwood.com/cs/ce/eudoc/

Latviešu

JVCKENWOOD ar šo deklarē, ka radio aparatūra

„KDC-BT640U/KDC-BT440U” atbilst direktīvas

2014/53/ES prasībām.

Pilns ES atbilstības deklarācijas teksts ir pieejams

šādā tīmekļa adresē:

http://www.kenwood.com/cs/ce/eudoc/

Lietuviškai

Šiuo JVCKENWOOD pažymi, kad radijo įranga

„KDC-BT640U/KDC-BT440U“ atitinka 2014/53/EB

direktyvos reikalavimus.

Visą EB direktyvos atitikties deklaracijos tekstą

galite rasti šiuo internetiniu adresu:

http://www.kenwood.com/cs/ce/eudoc/

Malti

B’dan, JVCKENWOOD jiddikjara li t-tagħmir tar-

radju “KDC-BT640U/KDC-BT440U” huwa konformi

mad-Direttiva 2014/53/UE.

It-test kollu tad-dikjarazzjoni ta’ konformità huwa

disponibbli fl-indirizz intranet li ġej:

http://www.kenwood.com/cs/ce/eudoc/

HRVATSKI / SRPSKI JEZIK

JVCKENWOOD ovim izjavljuje da je radio oprema

“KDC-BT640U/KDC-BT440U” u skladu s Direktivom

2014/53/EU.

Cjeloviti tekst deklaracije Europske unije o

usklađenosti dostupan je na sljedećoj internet

adresi:

http://www.kenwood.com/cs/ce/eudoc/

ROMÂNĂ

Prin prezenta, JVCKENWOOD declară că

echipamentul radio “KDC-BT640U/KDC-BT440U”

este în conformitate cu Directiva 2014/53/UE.

Textul integral al declarației de conformitate UE

este disponibil la urmatoarea adresă de internet:

http://www.kenwood.com/cs/ce/eudoc/

БЪЛГАРСКИ

С настоящото JVCKENWOOD декларира, че

радиооборудването на “KDC-BT640U/

KDC-BT440U” е в съответствие с Директива

2014/53/ЕС.

Пълният текст на ЕС декларацията за

съответствие е достъпен на следния интернет

адрес:

http://www.kenwood.com/cs/ce/eudoc/

Turkish

Burada, JVCKENWOOD “KDC-BT640U/

KDC-BT440U” radyo ekipmanının 2014/53/AB

Direktifine uygun olduğunu bildirir.

AB uyumluluk deklarasyonunun tam metni

aşağıdaki internet adresinde mevcuttur.

http://www.kenwood.com/cs/ce/eudoc/

Русский

JVCKENWOOD настоящим заявляет, что

радиооборудование «KDC-BT640U/KDC-BT440U»

соответствует Директиве 2014/53/EU.

Полный текст декларации соответствия

ЕС доступен по следующему адресу в сети

Интернет:

http://www.kenwood.com/cs/ce/eudoc/

Українська

Таким чином, компанія JVCKENWOOD заявляє,

що радіообладнання «KDC-BT640U/

KDC-BT440U» відповідає Директиві 2014/53/EU.

Повний текст декларації про відповідність ЄС

можна знайти в Інтернеті за такою адресою:

http://www.kenwood.com/cs/ce/eudoc/

JS_KWD_KDC_BT640U_EN_C10a.indd viiiJS_KWD_KDC_BT640U_EN_C10a.indd viii 17/10/2019 2:34:27 PM17/10/2019 2:34:27 PM

2

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Contents

Before Use ................................................................................................. 3

Basics ......................................................................................................... 4

Getting Started ........................................................................................ 5

1 Select the display language and cancel the demonstration

2 Set the clock and date

3 Set the other optional settings

Radio .......................................................................................................... 7

CD/USB/iPod............................................................................................. 9

Spotify ..................................................................................................... 11

AUX........................................................................................................... 13

Using Other Applications ..................................................................... 13

KENWOOD Remote application

TuneIn Radio/TuneIn Radio Pro

Bluetooth® .............................................................................................. 15

Bluetooth – Connection

Bluetooth – Mobile phone

Bluetooth – Audio

AMAZON ALEXA .................................................................................... 21

Audio Settings ........................................................................................22

Display Settings ..................................................................................... 27

Installation/Connection ....................................................................... 28

References .............................................................................................. 32

Maintenance

More information

Change the display information

Troubleshooting .................................................................................... 34

Specifications ......................................................................................... 37

JS_KWD_KDC_BT640U_EN_EN.indd 2JS_KWD_KDC_BT640U_EN_EN.indd 2 6/19/2019 2:57:41 PM6/19/2019 2:57:41 PM

ENGLISH

3

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Before Use

IMPORTANT

• To ensure proper use, please read through this manual before using this

product. It is especially important that you read and observe Warnings and

Cautions in this manual.

• Please keep the manual in a safe and accessible place for future reference.

WARNING

• Do not operate any function that takes your attention away from safe

driving.

CAUTION

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent

accidents.

• Lower the volume before playing digital sources to avoid damaging the

speakers by the sudden increase of the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no

responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal tools) inside

the unit to prevent a short circuit.

• If a disc error occurs due to condensation on the laser lens, eject the disc

and wait for the moisture to evaporate.

• USB rating is indicated on the main unit. To view, detach the faceplate.

(Page 4)

• Depending on the types of cars, the antenna will automatically extend

when you turn on the unit with the antenna control wire connected

(page31). Turn off the unit or change the source to STANDBY when

parking at a low ceiling area.

This symbol on the product means there are important

operating and maintenance instructions in this manual.

Be sure to carefully read instructions in this manual.

How to read this manual

• The displays and faceplates shown in this manual are examples used to

provide clear explanations of the operations. For this reason, they may

be different from the actual displays or faceplates.

• Operations are explained mainly using buttons on the faceplate of

.

• English indications are used for the purpose of explanation. You can

select the display language from the

[FUNCTION]

menu. (Page6)

•

[XX]

indicates the selected items.

• (PageXX) indicates references are available on the stated page.

JS_KWD_KDC_BT640U_EN_EN.indd 3JS_KWD_KDC_BT640U_EN_EN.indd 3 6/7/2019 1:33:29 PM6/7/2019 1:33:29 PM

4

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Basics

To On the faceplate

Turn on the power

Press B SRC.

• Press and hold to turn off the power.

Adjust the volume Turn the volume knob.

Select a source

• Press B SRC repeatedly.

• Press B SRC, then turn the volume knob within 2 seconds.

Change the display information Press DISP repeatedly. (Page 33, 34)

Attach

How to reset

Detach

Faceplate

Reset the unit within 5 seconds after

detaching the faceplate.

* Only for illustration purpose.

Volume knob Loading slot

Detach button Display window*

Lights up when Bluetooth

connection is established.

(Page15)

JS_KWD_KDC_BT640U_EN_EN.indd 4JS_KWD_KDC_BT640U_EN_EN.indd 4 6/7/2019 1:33:29 PM6/7/2019 1:33:29 PM

ENGLISH

5

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Getting Started

1

Select the display language and cancel the demonstration

When you turn on the power for the first time (or

[FACTORY RESET]

is set to

[YES]

, see page6), the display shows: “SEL LANGUAGE” “PRESS”

“VOLUME KNOB”

1 Turn the volume knob to select

[EN]

(English) /

[RU]

(Russian) /

[SP]

(Spanish) /

[FR]

(French) /

[GE]

* (German), then press the knob.

[EN]

is selected for the initial setup.

Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”.

2 Press the volume knob again.

[YES]

is selected for the initial setup.

3 Press the volume knob again.

“DEMO OFF” appears.

* Only for .

Then, the display shows the selected crossover type: “2-WAY X ’ OVER” or

“3-WAY X ’ OVER”

• To change the crossover type, see “Change the crossover type” on

page7.

2

Set the clock and date

1

Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select

[CLOCK]

, then press the knob.

To adjust the clock

3 Turn the volume knob to select

[CLOCKADJUST]

, then press the knob.

4 Turn the volume knob to make the settings, then press the knob.

Set the time in the order of “Hour” “Minute”.

5 Turn the volume knob to select

[CLOCK FORMAT]

, then press the knob.

6 Turn the volume knob to select

[12H]

or

[24H]

, then press the knob.

To set the date

7 Turn the volume knob to select

[DATEFORMAT]

, then press the knob.

8 Turn the volume knob to select

[DD/MM/YY]

or

[MM/DD/YY]

, then press

the knob.

9 Turn the volume knob to select

[DATESET]

, then press the knob.

10 Turn the volume knob to make the settings, then press the knob.

Set the date in the order of “Day” “Month” “Year” or “Month” “Day”

“Year”.

11 Press and hold to exit.

To return to the previous setting item, press

.

3

Set the other optional settings

You can only set the following items while the unit is in STANDBY source.

1 Press B SRC repeatedly to enter STANDBY.

2 Press the volume knob to enter

[FUNCTION]

.

3 Turn the volume knob to select an item (page 6), then press the

knob.

4 Repeat step 3 until the desired item is selected or activated.

5 Press and hold to exit.

To return to the previous setting item, press

.

JS_KWD_KDC_BT640U_EN_EN.indd 5JS_KWD_KDC_BT640U_EN_EN.indd 5 6/20/2019 1:59:55 PM6/20/2019 1:59:55 PM

6

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Default: [XX]

[AUDIO CONTROL]

[SWITCH PREOUT]

(Applicable only if [X’OVER] is set to [2WAY].) (Page 7)

[REAR]/[SUB-W]: Selects whether rear speakers or a subwoofer are

connected to the line out terminals on the rear (through an external

amplifier). (Page 30)

[DISPLAY]

[EASY MENU]

(For )

When entering [FUNCTION]...

[ON]: [ZONE 1] illumination changes to white color. ;

[OFF]: [ZONE 1] illumination remains as [COLOR SELECT] color.

(Page 27)

• [ZONE 2] illumination changes to light blue color when you enter

[FUNCTION], irregardless of the [EASY MENU] setting.

• Refer to the illustration on page 27 for zone identification.

[TUNER SETTING]

[PRESET TYPE]

[NORMAL]: Memorizes one station for each preset button in each band

(FM1/FM2/FM3/MW/LW). ; [MIX]: Memorizes one station for each preset

button, regardless of the selected band.

[SYSTEM]

[KEY BEEP]

(Applicable only if [X’OVER] is set to [2WAY].) (Page 7)

[ON]: Activates the keypress tone. ; [OFF]: Deactivates.

[SOURCE SELECT]

[SPOTIFY SRC]

[ON]: Enables SPOTIFY/SPOTIFY BT in source selection. ;

[OFF]: Disables. (Page 11)

[BT AUDIO SRC]

[ON]: Enables BT AUDIO in source selection. ;

[OFF]: Disables. (Page 20)

[BUILT-IN AUX]

[ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 13)

[P-OFF WAIT] Applicable only when the demonstration mode is turned off.

Sets the duration when the unit will automatically turn off (while in standby

mode) to save the battery.

[20M]: 20 minutes ; [40M]: 40 minutes ; [60M]: 60 minutes ;

[– – –]: Cancels

[CD READ]

[1]: Automatically distinguishes between audio file disc and music CD. ;

[2]: Forces to play as a music CD. No sound can be heard if an audio file disc

is played.

[F/W UPDATE]

[UPDATE SYSTEM]

[F/W UP xxxx]

[YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not

activated).

For details on how to update the firmware, visit

<www.kenwood.com/cs/ce/>.

[FACTORY RESET]

[YES]: Resets the settings to default (except the stored station). ;

[NO]: Cancels.

[ENGLISH]

Select the display language for [FUNCTION] menu and music information

if applicable.

By default, [ENGLISH] is selected.

[РУССКИЙ]

[ESPANOL]

[FRANCAIS]

[DEUTSCH]*

* Only for

.

Getting Started

JS_KWD_KDC_BT640U_EN_EN.indd 6JS_KWD_KDC_BT640U_EN_EN.indd 6 6/7/2019 1:33:29 PM6/7/2019 1:33:29 PM

ENGLISH

7

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Getting Started

Change the crossover type

1

Press B SRC repeatedly to enter STANDBY.

2 Press and hold number buttons 4 and 5 to enter crossover select.

The current crossover type appears.

3 Turn the volume knob to select “2WAY” or “3WAY”, then press the

knob.

4 Turn the volume knob to select “YES” or “NO”, then press the knob.

The selected crossover type appears.

• To cancel, press and hold

.

• To adjust the selected crossover settings, see page 24.

CAUTION

Select a crossover type according to how the speakers are connected.

(Page30, 31)

If you select a wrong type:

• The speakers may damage.

• The output sound level may be extremely high or low.

Radio

• “ST” indicator lights up when receiving an FM stereo broadcast with

sufficient signal strength.

• The unit switches to FM alarm automatically when receiving an alarm

signal from FM broadcast.

Search for a station

1

Press B SRC repeatedly to select RADIO.

2 Press BAND repeatedly to select FM1/FM2/FM3/MW/LW.

3 Press S / T to search for a station.

You can store up to 18 stations for FM and 6 stations for MW/LW.

• To store a station: Press and hold one of the number buttons (1 to 6).

• To select a stored station:

Press one of the number buttons (1 to 6).

Other settings

1

Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select an item (page 8), then press the

knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press

.

JS_KWD_KDC_BT640U_EN_EN.indd 7JS_KWD_KDC_BT640U_EN_EN.indd 7 6/7/2019 1:33:29 PM6/7/2019 1:33:29 PM

8

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Default: [XX]

[TUNER SETTING]

[SEEK MODE]

Selects the searching method for

S

/

T

buttons when pressed.

[AUTO1]: Automatically search for a station. ; [AUTO2]: Search for a preset

station. ; [MANUAL]: Manually search for a station.

[LOCAL SEEK]

[ON]: Searches only stations with good reception. ; [OFF]: Cancels.

• Settings made are applicable only to the selected source/station. Once

you change the source/station, you need to make the settings again.

[AUTO MEMORY]

[YES]: Automatically starts memorizing 6 stations with good reception. ;

[NO]: Cancels.

• Selectable only if [NORMAL] is selected for [PRESET TYPE]. (Page 6)

[MONO SET]

[ON]: Improves the FM reception, but the stereo effect will be lost. ;

[OFF]: Cancels.

[NEWS SET]

[ON]: The unit will temporarily switch to News Programme if available. ;

[OFF]: Cancels.

[REGIONAL]

[ON]: Switches to another station only in the specific region using the “AF”

control. ; [OFF]: Cancels.

[AF SET]

[ON]: Automatically searches for another station broadcasting the same

program in the same Radio Data System network with better reception

when the current reception is poor. ; [OFF]: Cancels.

[TI]

[ON]: Allows the unit to temporarily switch to Traffic Information if

available (“TI” indicator lights up) while listening to all sources except in

MW/LW. ; [OFF]: Cancels.

[PTY SEARCH]

1

Turn the volume knob to select the available Program Type (see the

following “Available Program Type for [PTY SEARCH]”), then press the

knob.

2

Turn the volume knob to select the PTY language ([ENGLISH]/

[FRENCH]/[GERMAN]), then press the knob.

3

Press

S

/

T

to start searching.

[CLOCK]

[TIME SYNC]

[ON]: Synchronizes the unit’s time to the Radio Data System station time. ;

[OFF]: Cancels.

•

[LOCAL SEEK]

/

[MONO SET]

/

[NEWS SET]

/

[REGIONAL]

/

[AF SET]

/

[TI]

/

[PTY SEARCH]

is

selectable only when the band is FM1/FM2/FM3.

• If the volume is adjusted during reception of traffic information or news

bulletin, the adjusted volume is memorized automatically. It will be applied

the next time traffic information or news bulletin is turned on.

Available Program Type for

[PTY SEARCH]

[SPEECH]

:

[NEWS]

,

[AFFAIRS]

,

[INFO]

(information),

[SPORT]

,

[EDUCATE]

,

[DRAMA]

,

[CULTURE]

,

[SCIENCE]

,

[VARIED]

,

[WEATHER]

,

[FINANCE]

,

[CHILDREN]

,

[SOCIAL]

,

[RELIGION]

,

[PHONE



IN]

,

[TRAVEL]

,

[LEISURE]

,

[DOCUMENT]

[MUSIC]

:

[POP



M]

(music),

[ROCK



M]

(music),

[EASY



M]

(music),

[LIGHT



M]

(music),

[CLASSICS],

[OTHER



M]

(music),

[JAZZ]

,

[COUNTRY]

,

[NATION



M]

(music),

[OLDIES]

,

[FOLK



M]

(music)

The unit will search for the Program Type categorized under

[SPEECH]

or

[MUSIC]

if selected.

Radio

JS_KWD_KDC_BT640U_EN_EN.indd 8JS_KWD_KDC_BT640U_EN_EN.indd 8 6/7/2019 1:33:29 PM6/7/2019 1:33:29 PM

ENGLISH

9

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

CD/USB/iPod

Insert a disc

Eject disc

Label side

The source changes to CD automatically and playback starts.

Connect a USB device

USB device

USB input terminal

CA-U1EX (max.: 500 mA)

(optional accessory)*1

The source changes to USB automatically and playback starts.

Connect an iPod/iPhone

(for )

USB input terminal

KCA-iP103 (optional accessory)*2

or accessory of the iPod/iPhone*1

iPod/

iPhone

The source changes to iPod USB automatically and playback starts.

• You can also connect iPod/iPhone via Bluetooth. (Page15)

*1 Do not leave the cable inside the car when not in use.

*2 KCA-iP103: Lightning type

Selectable source:

: CD/USB/iPod USB or iPod BT

: CD/USB

To On the faceplate

Play back/pause

Press 6 IW.

Reverse/Fast-forward

Press and hold S / T.

Select a track/file

Press S / T.

Select a folder*1 Press 2

/ 1 .

Repeat play*2 Press 4

repeatedly.

[TRACK REPEAT]

/

[ALL REPEAT]

: Audio CD

[FILE REPEAT]

/

[FOLDER REPEAT]

/

[ALL REPEAT]

: MP3/

WMA/AAC/WAV/FLAC file

[REPEAT ONE]

/

[REPEAT ALL]

/

[REPEAT OFF]

: iPod

Random play*2 Press 3

repeatedly.

[DISCRANDOM]

/

[RANDOM OFF]

: Audio CD

[FOLDERRANDOM]

/

[RANDOM OFF]

: MP3/WMA/

AAC/WAV/FLAC file

[SHUFFLE ON]

/

[SHUFFLE OFF]

: iPod

Press and hold 3

to select

[ALL RANDOM]

.*1

*1 For CD: Only for MP3/WMA/AAC files. This does not work for iPod.

*2 For iPod: Applicable only when [MODE OFF] is selected.

JS_KWD_KDC_BT640U_EN_EN.indd 9JS_KWD_KDC_BT640U_EN_EN.indd 9 6/18/2019 4:47:24 PM6/18/2019 4:47:24 PM

10

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

CD/USB/iPod

Select music drive

While in USB source, press 5 repeatedly.

Stored songs in the following drive will be played back.

• Selected internal or external memory of a smartphone (Mass Storage

Class).

• Selected drive of a multiple drive device.

You can also select the music drive from the

[FUNCTION]

menu.

1 Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select

[USB]

, then press the knob.

3 Turn the volume knob to select

[MUSIC DRIVE]

, then press the knob.

4 Turn the volume knob to select

[DRIVE CHANGE]

, then press the knob.

The next drive (

[DRIVE 1]

to

[DRIVE 4]

) is selected automatically and

playback starts.

5 Repeat step 1 to step 4 to select the following drives.

6 Press and hold to exit.

To return to the previous setting item, press

.

Select control mode

While in iPodUSB source (or iPodBT source), press 5 repeatedly.

[MODE ON]

: Control iPod/iPhone using the iPod/iPhone itself. However, you

can still perform play/pause, file skip, fast-forward or fast-reverse

from this unit.

[MODE OFF]

: Control iPod/iPhone from this unit.

Select a file to play

From a folder or list

• For iPod, applicable only when

[MODE OFF]

is selected.

1 Press .

2 Turn the volume knob to select a folder/list, then press the knob.

3 Turn the volume knob to select a file, then press the knob.

Selected file starts playing.

Quick search

(applicable only for CD source and USB source)

If you have many files, you can search through them quickly.

1 Press .

2 Turn the volume knob to select a folder/list, then press the knob.

3 Turn the volume knob quickly to browse through the list quickly.

4 Turn the volume knob to select a file, then press the knob.

Selected file starts playing.

Skip search

(applicable only for iPod USB source and iPod BT source)

If you have many files in the selected list, you can perform the following to

search for a file by skipping through the list at a rate selected in

[SKIP SEARCH]

.

(Page 11)

• For iPod, applicable only when

[MODE OFF]

is selected.

1 Press .

2 Turn the volume knob to select a list, then press the knob.

3 Press S / T to search at a preset skip search ratio.

• Pressing and holding S / T searches at a 10% ratio irregardless of

the

[SKIP SEARCH]

settings.

4 Turn the volume knob to select a file, then press the knob.

Selected file starts playing.

JS_KWD_KDC_BT640U_EN_EN.indd 10JS_KWD_KDC_BT640U_EN_EN.indd 10 6/7/2019 1:33:29 PM6/7/2019 1:33:29 PM

ENGLISH

11

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

[SKIP SEARCH] setting

1 Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select

[USB]

, then press the knob.

3 Turn the volume knob to select

[SKIP SEARCH]

, then press the knob.

4 Turn the volume knob to select the skip search ratio, then press the

knob.

[0.5%]

(default)/

[1%]

/

[5%]

/

[10%]

The skip search ratio is shown as a percentage of the total files.

5 Press and hold to exit.

Alphabet search

(applicable only for iPod USB source and iPod BT source)

You can search for a file according to the first character.

• For iPod, applicable only when

[MODE OFF]

is selected. (Page 10)

1 Press .

2 Turn the volume knob to select a list, then press the knob.

3 Turn the volume knob quickly to enter character search.

4 Turn the volume knob to select the character.

• Select “

*

” to search for a character other than A to Z, 0 to 9.

5 Press S / T to move to the entry position.

• You can enter up to 3 characters.

6 Press the volume knob to start searching.

7 Turn the volume knob to select a file, then press the knob.

Selected file starts playing.

• To return to the root folder/first file/top menu, press 5. (Not applicable for

BT AUDIO source.)

• To return to the previous setting item, press

.

• To cancel, press and hold

.

CD/USB/iPod Spotify

You can listen to Spotify on the following devices via USB input terminal (see

the following) or via Bluetooth (page 15).

: iPhone/iPod touch (via Bluetooth or via USB input terminal)

or Android device (via Bluetooth)

: Android device (via Bluetooth)

Preparation:

• Install the latest version of the Spotify application on your device (iPhone/

iPod touch or Android device), then create an account and log in to

Spotify.

• Select

[ON]

for

[SPOTIFY SRC]

in

[SOURCE SELECT]

. (Page6)

Start listening

1

Start up the Spotify application on your device.

2 Connect your device to the USB input terminal.

:

USB input terminal

KCA-iP103 (optional accessory)*1 or

accessory of the iPhone/iPod touch*2

iPhone/

iPod touch

You can also connect the iPhone/iPod touch or Android device via

Bluetooth. (Page 15)

• Make sure the USB input terminal is not connected to any device when

you connect via Bluetooth.

3 Press B SRC repeatedly to select SPOTIFY (for iPhone/iPod touch) or

SPOTIFY BT (for Android device).

Broadcast starts automatically.

*1, *2: See page 12.

JS_KWD_KDC_BT640U_EN_EN.indd 11JS_KWD_KDC_BT640U_EN_EN.indd 11 6/11/2019 10:08:58 AM6/11/2019 10:08:58 AM

12

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Spotify

Search for a song or station

1

Press .

2 Turn the volume knob to select a list type, then press the knob.

The list types displayed differ depending on the information sent from

Spotify.

3 Turn the volume knob to select the desired song or station.

4 Press the volume knob to confirm.

You can browse through the list quickly by turning the volume knob

quickly.

To cancel, press and hold

.

To On the faceplate

Play back/pause

Press 6 IW.

Skip a track

Press S*3 / T.

Select thumbs up or

thumbs down *4

Press 2

/ 1 .

Start radio Press and hold 5.

Repeat play*5 Press 4

repeatedly.

[REPEAT ALL]

,

[REPEAT ONE]

*3,

[REPEATOFF]

Random play*5 Press 3

repeatedly *3.

[SHUFFLE ON]

,

[SHUFFLEOFF]

*1 KCA-iP103: Lightning type

*2 Do not leave the cable inside the car when not in use.

*3 Available for premium account users only.

*4 This feature is available for tracks in Radio only. If thumbs down is selected, the current track is

skipped.

*5 Available for tracks in Playlists only.

Save favorite song information

While listening to the Radio on Spotify...

Press and hold the volume knob.

“SAVED” appears and the information is stored to “Your Music” or “Your

Library” on your Spotify account.

To unsave, repeat the same procedure.

“REMOVED” appears and the information is removed from “Your Music” or

“Your Library” on your Spotify account.

JS_KWD_KDC_BT640U_EN_EN.indd 12JS_KWD_KDC_BT640U_EN_EN.indd 12 6/7/2019 1:33:30 PM6/7/2019 1:33:30 PM

La page charge ...

Kenwood KDC-BT640U Le manuel du propriétaire

Ce manuel convient également à

Kenwood KDC-BT640U Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents