Configure your router
Browse the web management page
When you login to the web management page,
you can browse the router settings and change
them if necessary.
TIPS
• Before you browse the web management page,
open Internet Properties of your computer and
check the settings. Make sure you do not use a
proxy server for LAN settings.
• Check the property of your Internet protocol. Make
sure it can obtain an IP address automatically. Do
not use a fixed IP address.
1. Connect your computer to the router.
2. Open a browser on your computer.
3. Type 192.168.1.1 in the address bar, and
then press enter.
4. Input username and password to login to the
router. The table below shows the default
username and password.
Username Password
Administrative
account admin 12345
Normal user
account user user1234
NOTE
• Both administrative account and normal user
account can view the router settings. To change
the settings, you must login as an administrative
account.
Change username and password
NOTE
• For security purposes, we recommend you change
the username and password periodically.
1. On the web management page, click
Maintenance on the menu bar.
2. Click Password on the side menu.
3. Fill in respective text boxes to add, modify or
delete an account.
General product care
Taking care of your router
Your router contains sophisticated electronic parts,
so it must be treated with care.
Avoid rough treatment
Place the router down gently. Save the original
packing materials to protect your router if you ever
need to ship it.
Avoid water
Your router can be damaged if it gets wet. Do not
use the router outdoors in the rain, or handle it with
wet hands. Do not install the router near a sink,
bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power
surges harmful to electronic equipment. For your
own safety, take caution when using electrical
appliances during storms.
Cleaning your router
Your router has a durable plastic casing that should
retain its luster for many years. Clean it only with a
dry non-abrasive cloth. Do not use dampened cloth
or cleaning solvents of any kind.
Frequently asked questions
Below are the questions most frequently asked
about the router. If you cannot find the answer to
your question, visit our website at
businessphones.vtech.com or call
1 (888) 370-2006 for customer service.
My router
does not
work.
Make sure you install the router
properly, and the electrical outlet is
not controlled by a wall switch.
Make sure the router is powered on
and the light is on.
My router
cannot load
data from
the Internet.
Make sure you connect the WAN
port properly. DO NOT mix up the
WAN port with LAN ports.
Press and hold the RESET button
for five seconds, and then wait for a
few minutes for the router to restart.
Observe the WAN light, it flashes
when the router receives data.
NOTE: The router resets to
default settings. Use the default
usernames and passwords to log in
to the web management page.
Disconnect the Ethernet cable
from the router and connect it to a
different router. If there is no signal
on that router either, the problem
is in your wiring or local service.
Contact your Internet service
provider.
Your Ethernet cable might be
defective. Try installing a new one.
What’s in the box
Your telephone package contains the following
items. Save your sales receipt and original
packaging in the event warranty service is
necessary.
Overview
Indicator Lights
1 – On/Off
2 – USB
• On when a device is connected to the USB port.
• Flashes when the USB port receives data
3 – WAN
• On when the WAN port is connected to Internet
and connectivity is established.
4 – LAN
• On when any LAN port is connected.
• Flashes when any LAN port receives data.
5 – Wi-Fi
• On when the Wi-Fi is turned on.
6 – WPS
• On when WPS is in progress.
Back Panel
7 – USB port
8 – Power jack
9 – (On/Off) button
10 – LAN ports
• Connect to Ethernet devices such as computers
and SIP phones.
11 – WAN port
• Connects to the wide area network
12 – RESET button
• Press and hold to reset the router to default
settings.
13 – WPS button
• Press and hold to use WPS.
Abridged user’s manual
Congratulations
on purchasing your new VTech product. Before
using this router, please read the Important
safety instructions.
This abridged user’s manual provides you with
basic installation and use instructions. A limited
set of features are described in abbreviated
form.
Please refer to the online user’s manual for a full
set of installation and operation instructions at
businessphones.vtech.com.
VNT832
4-Port Ethernet Router
Go to
businessphones.vtech.com
to register your product for
enhanced warranty support and
the latest VTech product news.
Abridged
user’s
manual
11 12 13 14 15 16 17 18 19
123 4 56
7
8 9 10 11
12
13
2 3 4 5 6 7 8 9
20
10
Plan and connect your system
Connects to
Computer
Connects to
SIP Phone
Power
on/off
button
Connects
to power
Connects to the
internet via
Cable/DSL Modem
This router has four LAN ports. Use them to connect your computers, SIP phones, or other Ethernet
devices.
NOTES
• Use only the adapter provided.
• Make sure the electrical outlet is not controlled by a wall switch.
• The adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed
to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.
To turn the VNT832 on, press the button at the back of the router. The light will light up.
11 12 13 14 15 16 17 18 19
123 4 56
7
8 9 10 11
12
13
2 3 4 5 6 7 8 9
20
10
WPS
WPS
Important safety instructions
When using your equipment, basic safety precautions
should always be followed to reduce the risk of fire,
electric shock and injury, including the following:
1. Read and understand all instructions.
2. Do not use this product near water such as near
a bath tub, wash bowl, kitchen sink, laundry tub
or a swimming pool, or in a wet basement or
shower.
3. Do not place this product on an unstable table,
shelf, stand or other unstable surfaces.
4. CAUTION: Use only the adapters included with
this product. Incorrect adapter polarity or voltage
can seriously damage the product.
Power adapter: Input 100-240V AC 500mA
50/60Hz; Output: 12V DC 1.0A
5. The power adapters are intended to be correctly
oriented in a vertical or floor mount position. The
prongs are not designed to hold the plug in place
if it is plugged into a ceiling, under-the-table or
cabinet outlet.
6. For pluggable equipment, the socket-outlet shall
be installed near the equipment and shall be
easily accessible.
7. Unplug this product from the wall outlet before
cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
8. Do not cut off the power adapters to replace
them with other plugs, as this causes a
hazardous situation.
9. Do not allow anything to rest on the power cords.
Do not install this product where the cords may
be walked on or crimped.
10. This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply in your home, consult your dealer or local
power company.
11. Do not overload wall outlets or use an extension
cord.
12. This product should not be placed in any area
where proper ventilation is not provided. Slots
and openings in the back or bottom of this
product are provided for ventilation. To protect
them from overheating, these openings must
not be blocked by placing the product on a soft
surface such as a bed, sofa or rug. This product
should never be placed near or over a radiator or
heat register.
13. Never push objects of any kind into this product
through the slots because they may touch
dangerous voltage points or create a short
circuit. Never spill liquid of any kind on the
product.
14. To reduce the risk of electric shock, do not
disassemble this product, but take it to an
authorized service facility. Opening or removing
parts of the product other than specified access
doors may expose you to dangerous voltages or
other risks. Incorrect reassembling can cause
electric shock when the product is subsequently
used.
15. Periodically examine all components for damage.
SAVE THESE INSTRUCTIONS
Electromagnetic fields (EMF)
This VTech product complies with all standards
regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this
user’s manual, the product is safe to be used based
on scientific evidence available today.
FCC and IC regulations
FCC part 15
This equipment has been tested and found to
comply with the requirements for a Class B
digital device under Part 15 of the Federal
Communications Commission (FCC) rules. These
requirements are intended to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
WARNING: Changes or modifications to this
equipment not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
This Class B digital apparatus complies with
Canadian requirement:
CAN ICES-3 (B)/NMB-3(B).
For cETL compliance only
Mesures de sécurité importantes
Lorsque vous utilisez votre appareil, vous devriez
toujours suivre certaines mesures de précaution
de base afin de réduire les risques d’incendie,
d’électrocution et de blessures corporelles, dont
ceux qui suivent :
1. Lisez et comprenez bien toutes les instructions.
2. N’utilisez pas cet appareil près de l’eau ni de
toute autre source d’humidité, par exemple, près
d’une baignoire, cuve à lessive, évier de cuisine,
dans un sous-sol humide ni près d’une piscine,
dans un soussol humide ou une douche.
3. Ne déposez pas ce téléphone sur un chariot,
support ou table chancelants. L’appareil pourrait
tomber et être sérieusement endommagé.
4. MISE EN GARDE : N’utilisez que les
adaptateurs inclus avec ce produit. L’utilisation
d’un adaptateur dont la polarité ou la tension
serait inadéquate risque d’endommager
sérieusement le produit et mettre votre sécurité
en péril.
Adaptateur : Entrée 100-240V CA 500mA
50/60 Hz; Sortie : 12 V CC 1.0A
5. Lorsqu’ils sont branchés dans une prise de
courant, les adaptateurs secteur ont été conçus
pour être orientés correctement, soit à la
verticale ou au plancher. Les broches n’ont pas
été conçues pour supporter le poids du bloc
d’alimentation et le maintenir en place si celuici
est branché dans une prise au plafond, sous une
table ou dans un meuble.
6. Pour les PRODUITS À BRANCHER À UNE
PRISE DE COURANT, la prise de courant doit
être installée près du produit, afin d’assurer une
accessibilité sécuritaire à la prise de courant.
7. Débranchez ce produit de la prise de courant
avant de procéder au nettoyage. N’utilisez pas
de nettoyants en aérosols. Utilisez un chiffon
humide pour le nettoyer.
8. Ne coupez pas les cordons d’alimentation pour
remplacer les fiches, car ceci peut présenter un
danger potentiel.
9. Ne laissez aucun objet reposer ni appuyer sur
le cordon d’alimentation. N’installez pas cet
appareil dans un endroit où l’on risque d’écraser
le cordon d’alimentation ou de le piétiner.
10. Ne faites fonctionner cet appareil qu’avec le
type d’alimentation indiqué sur l’étiquette. Si
vous ne connaissez pas le type d’alimentation
que vous possédez à votre domicile, consultez
votre marchand ou votre compagnie locale
d’électricité.
11. Ne surchargez pas les prises de courant murales
ni les rallonges électriques.
12. Les trous et ouvertures du boîtier, situés à
l’arrière de l’appareil ou sous celui-ci, servent à
aérer l’appareil. Pour l’empêcher de surchauffer,
ne bloquez sous aucun prétexte ces ouvertures
et n’empêchez pas l’aération adéquate de
l’appareil en le plaçant sur un lit, divan, tapis ou
toute autre surface similaire. De même, ne le
positionnez pas à proximité ni au-dessus d’une
source de chaleur ou d’un calorifère. De plus,
ne placez pas l’appareil dans un endroit avant
de vous assurer qu’il y ait une bonne circulation
d’air.
13. N’enfoncez jamais d’objets à travers les
ouvertures de cet appareil, car ils pourraient
entrer en contact avec des points de tension
dangereux ou causer des courts-circuits qui
peuvent dégénérer en incendies ou en risques
d’électrocution. Ne renversez jamais de liquide
dans ce produit.
14. Afin de réduire les risques d’électrocution, ne
démontez pas cet appareil, mais apportez-le
dans un centre de service autorisé. L’ouverture
du boîtier ou le retrait de toutes pièces que
contient cet appareil, à l’exception de l’accès
autorisé à certaines portes ou ouvertures,
risque de vous exposer à des points de tension
dangereux ou d’autres dangers. Un remontage
incorrect peut par la suite présenter des risques
d’électrocution.
15. Examinez les composantes afin de vérifier si
celles-ci ne sont pas endommagées.
CONSERVEZ CES INSTRUCTIONS
Champs électromagnétiques (EMF)
Ce produit de VTech est conforme à toutes
les normes se rapportant aux champs
électromagnétiques (EMF) standard. Si vous le
manipulez correctement en suivant les instructions
de ce guide, son utilisation sera sécuritaire pendant
de nombreuses années, selon les meilleures
évidences scientifiques dont nous disposons
aujourd’hui.
Limited warranty
What does this limited warranty cover?
The manufacturer of this VTech Product warrants to
the holder of a valid proof of purchase (“Consumer”
or “you”) that the Product and all accessories
provided in the sales package (“Product”) are free
from defects in material and workmanship, pursuant
to the following terms and conditions, when
installed and used normally and in accordance
with the Product operating instructions. This limited
warranty extends only to the Consumer for Products
purchased and used in the United States of America
and Canada.
What will VTech do if the Product is not free from
defects in materials and workmanship during
the limited warranty period (“Materially Defective
Product”)?
During the limited warranty period, VTech’s
authorized service representative will repair
or replace at VTech’s option, without charge,
a Materially Defective Product. If we repair
the Product, we may use new or refurbished
replacement parts. If we choose to replace the
Product, we may replace it with a new or refurbished
Product of the same or similar design. We will retain
defective parts, modules, or equipment. Repair or
replacement of the Product, at VTech’s option, is
your exclusive remedy. VTech will return the repaired
or replacement Products to you in working condition.
You should expect the repair or replacement to take
approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the Product extends
for TWO (2) YEARS from the date of purchase. If
VTech repairs or replaces a Materially Defective
Product under the terms of this limited warranty,
this limited warranty also applies to the repaired
or replacement Product for a period of either (a)
90 days from the date the repaired or replacement
Product is shipped to you or (b) the time remaining
on the original one-year warranty; whichever is
longer.
What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse,
accident, shipping or other physical damage,
improper installation, abnormal operation or
handling, neglect, inundation, fire, water or other
liquid intrusion;
2. Product that has been damaged due to repair,
alteration or modification by anyone other than an
authorized service representative of VTech;
3. Product to the extent that the problem experienced
is caused by signal conditions, network reliability,
or cable or antenna systems;
4. Product to the extent that the problem is caused by
use with non-VTech accessories;
5. Product whose warranty/quality stickers, product
serial number plates or electronic serial numbers
have been removed, altered or rendered illegible;
6. Product purchased, used, serviced, or shipped for
repair from outside the United States of America
or Canada, or used for commercial or institutional
purposes (including but not limited to Products
used for rental purposes);
7. Product returned without a valid proof of purchase
(see item 2 below); or
8. Charges for installation or set up, adjustment of
customer controls, and installation or repair of
systems outside the unit.
How do you get warranty service?
To obtain warranty service in the USA and Canada,
please visit our website at businessphones.vtech.com
or call 1 (888) 370-2006.
NOTE: Before calling for service, please review the
user’s manual - a check of the Product’s controls and
features may save you a service call.
Except as provided by applicable law, you assume the
risk of loss or damage during transit and transportation
and are responsible for delivery or handling charges
incurred in the transport of the Product(s) to the service
location. VTech will return repaired or replaced Product
under this limited warranty. Transportation, delivery
or handling charges are prepaid. VTech assumes no
risk for damage or loss of the Product in transit. If the
Product failure is not covered by this limited warranty,
or proof of purchase does not meet the terms of this
limited warranty, VTech will notify you and will request
that you authorize the cost of repair prior to any further
repair activity. You must pay for the cost of repair and
return shipping costs for the repair of Products that are
not covered by this limited warranty.
What must you return with the Product to get
warranty service?
1. Return the entire original package and contents
including the Product to the VTech service location
along with a description of the malfunction or
difficulty; and
2. Include a “valid proof of purchase” (sales receipt)
identifying the Product purchased (Product model)
and the date of purchase or receipt; and
3. Provide your name, complete and correct mailing
address, and telephone number.
Other limitations
This warranty is the complete and exclusive
agreement between you and VTech. It supersedes all
other written or oral communications related to this
Product. VTech provides no other warranties for this
Product. The warranty exclusively describes all of
VTech’s responsibilities regarding the Product. There
are no other express warranties. No one is authorized
to make modifications to this limited warranty and you
should not rely on any such modification.
State/Provincial Law Rights: This warranty gives you
specific legal rights, and you may also have other
rights, which vary from state to state or province to
province.
Limitations: Implied warranties, including those of
fitness for a particular purpose and merchantability
(an unwritten warranty that the Product is fit for
ordinary use) are limited to one year from the date
of purchase. Some states/provinces do not allow
limitations on how long an implied warranty lasts,
so the above limitation may not apply to you. In no
event shall VTech be liable for any indirect, special,
incidental, consequential, or similar damages
(including, but not limited to lost profits or revenue,
inability to use the Product or other associated
equipment, the cost of substitute equipment, and
claims by third parties) resulting from the use of this
Product. Some states/provinces do not allow the
exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may
not apply to you.
Please retain your original sales receipt as
proof of purchase.
Technical specifications
Operating
temperature 32°F – 104°F
0°C – 40°C
Power
requirements Input: 100-240V AC 50/60Hz 500mA
Output: 12V DC 1.0A
Ethernet
Network Ports 10/100 Mbps RJ-45
Specifications are subject to change without notice.
© 2016 VTech Communications, Inc.
All rights reserved. 12/16. VNT832_ACIB_V1.0
Document order number:
The Wi-Fi CERTIFIED™ Logo is a certication mark of
Wi-Fi Alliance®.
-
1
-
2
dans d''autres langues
- English: VTech VNT832 User manual
Documents connexes
-
VTech VNT832 Manuel utilisateur
-
VTech VNT814 Manuel utilisateur
-
VTech VCS754 Manuel utilisateur
-
-
-
-
-
VTech RM7868HD Guide de démarrage rapide
-