VTech DS6621-2 Manuel utilisateur

BC

DS6621

DS6621-2

DS6621-3

DS6621-4

DS662V-1F

DS662V-1G

DS662V-1H

DS662V-1J

DECT 6.0 cordless telephone

with BLUETOOTH® wireless technology

Go to www.vtechphones.com

to register your product for

enhanced warranty support and

the latest VTech product news.

User’s manual

Congratulations

on purchasing your new VTech product.

Before using this telephone, please read

Important safety instructions.

This manual has all the feature

operations and troubleshooting

necessary to install and operate your

new VTech telephone. Please review

this manual thoroughly to ensure

proper installation and operation of

this innovative and feature rich VTech

product.

For support, shopping, and everything

new at VTech, visit our website at

www.vtechphones.com.

In Canada, please visit

www.vtechcanada.com.

Telephones identiﬁed with

this logo have reduced

noise and interference

when used with most T-coil

equipped hearing aids

and cochlear implants.

The TIA-1083 Compliant

Logo is a trademark of

the Telecommunications

Industry Association. Used

under license.

Important safety

instructions

When using your telephone equipment,

basic safety precautions should always

be followed to reduce the risk of ﬁre,

electric shock and injury, including the

following:

1. Read and understand all instructions.

2. Follow all warnings and instructions

marked on the product.

3. Unplug this product from the wall

outlet before cleaning. Do not use

liquid or aerosol cleaners. Use a

damp cloth for cleaning.

4. Do not use this product near water

such as near a bath tub, wash bowl,

kitchen sink, laundry tub or swimming

pool, or in a wet basement or shower.

5. Do not place this product on an

unstable table, shelf, stand or other

unstable surfaces.

6. Avoid placing the telephone system

in places with extreme temperature,

direct sunlight, or other electrical

devices. Protect your phone from

moisture, dust, corrosive liquids and

fumes.

7. Slots and openings in the back or

bottom of the telephone base and

handset are provided for ventilation.

To protect them from overheating,

these openings must not be blocked

by placing the product on a soft

surface such as a bed, sofa or rug.

This product should never be placed

near or over a radiator or heat register.

This product should not be placed in

any area where proper ventilation is

not provided.

8. This product should be operated

only from the type of power source

indicated on the marking label. If

you are not sure of the type of power

supply in your home or ofﬁce, consult

your dealer or local power company.

T

Compatible with

Hearing

Aid T-Coil

TIA-1083

9. Do not allow anything to rest on

the power cord. Do not install this

product where the cord may be

walked on.

10. Never push objects of any kind into

this product through the slots in the

telephone base or handset because

they may touch dangerous voltage

points or create a short circuit. Never

spill liquid of any kind on the product.

11. To reduce the risk of electric shock,

do not disassemble this product,

but take it to an authorized service

facility. Opening or removing parts of

the telephone base or handset other

than speciﬁed access doors may

expose you to dangerous voltages or

other risks. Incorrect reassembling

can cause electric shock when the

product is subsequently used.

12. Do not overload wall outlets and

extension cords.

13. Unplug this product from the wall

outlet and refer servicing to an

authorized service facility under the

following conditions:

• When the power supply cord or

plug is damaged or frayed.

• If liquid has been spilled onto the

product.

• If the product has been exposed

to rain or water.

• If the product does not operate

normally by following the

operating instructions. Adjust only

those controls that are covered

by the operation instructions.

Improper adjustment of other

controls may result in damage and

often requires extensive work by

an authorized technician to restore

the product to normal operation.

• If the product has been dropped

and the telephone base and/or

handset has been damaged.

• If the product exhibits a distinct

change in performance.

14. Avoid using a telephone (other than

cordless) during an electrical storm.

There is a remote risk of electric

shock from lightning.

15. Do not use the telephone to report

a gas leak in the vicinity of the leak.

Under certain circumstances, a spark

may be created when the adapter

is plugged into the power outlet, or

when the handset is replaced in

its cradle. This is a common event

associated with the closing of any

electrical circuit. The user should

not plug the phone into a power

outlet, and should not put a charged

handset into the cradle, if the phone is

located in an environment containing

concentrations of ﬂammable or

ﬂame-supporting gases, unless there

is adequate ventilation. A spark in

such an environment could create a

ﬁre or explosion. Such environments

might include: medical use of oxygen

without adequate ventilation; industrial

gases (cleaning solvents; gasoline

vapors; etc.); a leak of natural gas; etc.

16. Only put the handset of your

telephone next to your ear when it is

in normal talk mode.

17. The power adapters are intended to

be correctly oriented in a vertical or

ﬂoor mount position. The prongs are

not designed to hold the plug in place

if it is plugged into a ceiling,

under-the-table or cabinet outlet

18. For pluggable equipment, the

socket-outlet shall be installed near

the equipment and shall be easily

accessible.

SAVE THESE INSTRUCTIONS

Battery

• CAUTION:UseOnlySupplied

Battery.

• Donotdisposeofthebatteryinafire.

Checkwithlocalwastemanagement

codesforspecialdisposal

instructions.

• Donotopenormutilatethebattery.

Releasedelectrolyteiscorrosiveand

maycauseburnsorinjurytotheeyes

orskin.Theelectrolytemaybetoxicif

swallowed.

• Exercisecareinhandlingbatteriesin

ordernottocreateashortcircuitwith

conductivematerials.

• Chargethebatteryprovidedwiththis

productonlyinaccordancewiththe

instructionsandlimitationsspecified

inthismanual.

Precautions for users of implanted

cardiac pacemakers

Cardiac pacemakers (applies only to

digital cordless telephones):

Wireless Technology Research, LLC

(WTR), an independent research entity,

led a multidisciplinary evaluation of the

interference between portable wireless

telephones and implanted cardiac

pacemakers. Supported by the U.S.

Food and Drug Administration, WTR

recommends to physicians that:

Pacemaker patients

• Should keep wireless telephones at

least six inches from the pacemaker.

• Should NOT place wireless telephones

directly over the pacemaker, such as in

a breast pocket, when it is turned ON.

• Should use the wireless telephone at

the ear opposite the pacemaker.

WTR’s evaluation did not identify any

risk to bystanders with pacemakers

from other persons using wireless

telephones.

About cordless telephones

• Privacy: The same features that make

a cordless telephone convenient

create some limitations. Telephone

calls are transmitted between the

telephone base and the cordless

handset by radio waves, so there is a

possibility that the cordless telephone

conversations could be intercepted

by radio receiving equipment within

range of the cordless handset. For

this reason, you should not think of

cordless telephone conversations as

being as private as those on corded

telephones.

• Electrical power: The telephone

base of this cordless telephone must

be connected to a working electrical

outlet. The electrical outlet should not

be controlled by a wall switch. Calls

cannot be made from the cordless

handset if the telephone base is

unplugged, switched off or if the

electrical power is interrupted.

• Potential TV interference: Some

cordless telephones operate

at frequencies that may cause

interference to televisions and

VCRs. To minimize or prevent

such interference, do not place

the telephone base of the cordless

telephone near or on top of a TV or

VCR. If interference is experienced,

moving the cordless telephone farther

away from the TV or VCR often

reduces or eliminates the interference.

• Rechargeable batteries: Exercise

care in handling batteries in order

not to create a short circuit with

conducting material such as rings,

bracelets and keys. The battery or

conductor may overheat and cause

harm. Observe proper polarity

between the battery and the battery

charger.

• Nickel-metal hydride rechargeable

batteries: Dispose of these batteries

in a safe manner. Do not burn or

puncture the battery. Like other

batteries of this type, if burned or

punctured, they could release caustic

material which could cause injury.

Table of contents

What’s in the box.........................1

Overview ......................................2

Handset overview ...............................2

Telephone base overview ...................3

Charger overview ...............................4

Display icons overview .......................5

Handset and Telephone base

lights overview .................................5

Connect ........................................6

Connect the telephone base ...............6

Connect the charger ........................... 6

Mount the telephone base .................. 6

Install and charge the battery .............7

Charge the battery ..............................8

Before use ....................................9

Set date and time ...............................9

Check for a dial tone ...........................9

Bluetooth ....................................10

Glossary of terms ............................11

Bluetooth setup .................................12

VTech Connect to CellTM application ... 12

Add a Bluetooth enabled cell phone... 12

Add a Bluetooth enabled headset ....13

Auto connection ................................ 14

Connect a paired cell phone

or headset .....................................14

Disconnect a paired cell phone

or headset .....................................14

Review the cell devices list ...............14

Download phonebook ....................... 14

Configure your telephone ........16

Using the handset menu ...................16

Set language ....................................16

Set date and time .............................16

Home area code ............................... 17

Dial mode .........................................17

Temporary tone dialing .....................17

Telephone Operations ...........18

Make a home call .............................18

Predial a home call ...........................18

Answer a home call ..........................18

End a home call ................................18

Make a cell call .................................19

Predial a cell call ...............................19

End a cell call ...................................19

Answer a cell call while on

a home call ....................................19

Answer a home call while on

a cell call .......................................20

Speakerphone ..................................20

Volume ..............................................20

Mute ..................................................20

Join a call in progress (for multiple

handset models only) ....................20

Call waiting on the home line ............20

Call waiting on the cell line ...............21

Chain dialing .....................................21

Find handset .....................................21

Intercom ............................................22

Transfer a call ...................................22

Answer an incoming call during

an intercom call .............................23

Redial list ..................................23

Review a redial list entry ...................23

Dial a redial list entry ........................23

Delete a redial list entry .................... 23

Phonebook .................................24

Add a phonebook entry ....................24

Review phonebook entries ...............25

Alphabetical search ..........................25

Delete a phonebook entry ................25

Delete all phonebook entries ............ 26

Edit a phonebook entry ....................26

Dial a phonebook entry ....................26

Caller ID ......................................26

Review the caller ID log ....................26

Memory match ..................................27

Missed call indicator .........................27

View dialing options ..........................27

Dial a caller ID log entry ...................28

Save a caller ID log entry to

the phonebook ..............................28

Delete the caller ID log entries .........28

Call block ...................................29

Block unknown calls .........................29

Add a call block list entry .................. 29

Save a caller ID log entry to

call block list ..................................30

Review the call block list ...................30

Edit a call block list entry ..................30

Delete a call block list entry .............. 30

Sound settings .........................31

Key tone ............................................31

Ringer tone ....................................... 31

Handset ringer volume .....................31

Telephone base ringer volume .........31

Temporary ringer silencing ...............31

About the built-in

answering system

and voicemail service ............32

Set your built-in

answering system ..................33

Turn the answering system on

or off .............................................. 33

Default announcement .....................33

Record your own announcement ......33

Play your announcement ..................33

Delete your announcement ..............34

Set number of rings .........................34

Turn the call screening on or off .......34

Turn the message alert tone on

or off .............................................. 34

Voice guide ....................................... 35

Using your built-in

answering system ..................35

New message indication ...................35

Message playback ............................36

Delete all messages .........................36

Remote access .................................37

Set remote access code ...................38

Call screening ...................................38

Call intercept .....................................38

Record, play, and delete memos ......39

Using your built-in

answering system

and voicemail service ............39

Retrieve voicemail from

telephone service ...................40

Retrieve voicemail ............................40

Turn off the new

voicemail indicators ....................... 40

Cell phone voicemail ........................40

Expand your telephone

system .....................................41

Screen messages ......................41

ECO mode ..................................43

General product care ................44

Frequently asked questions .....44

The RBRC® seal .........................47

FCC, ACTA and IC

regulations ..............................48

California Energy Commission

battery charging testing

instructions .............................50

For C-UL compliance only ........50

Limited warranty........................53

Technical specifications ............ 55

1

What’s in the box

Your telephone package contains the

following items. Save your sales receipt

and original packaging in case it is

necessary to ship your telephone for

warranty service.

NOTE

To purchase replacement batteries or power

adapters, visit our website at

www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or dial

1 (800) 267-7377.

1 set for DS6621; DS662V-1F/DS662V-1G/

DS662V-1H/DS662V-1J

2 sets for DS6621-2;

3 sets for DS6621-3;

4 sets for DS6621-4;

Abridged user’s

manual

Quick start guide

1 set for DS6621-2;

2 sets for DS6621-3

3 sets for DS6621-4;

1 set for DS6621/DS6621-2/DS6621-3/

DS6611-4/DS662V-1F/

DS662V-1G/DS662V-1H/

DS662V-1J

Important Safety

Instructions

1 set for DS6621/DS6621-2/DS6621-3/

DS6611-4/DS662V-1F/

DS662V-1G/DS662V-1H/

DS662V-1J

2

Overview

Handset overview

1 – Handset earpiece

2 – LCD display

3 – MENU/SELECT

• Show the menu.

• While in a menu, press to select

an item, or save an entry or

setting.

4 – OFF/CANCEL

• Hang up a call.

• Silence the ringer temporarily

while the handset is ringing.

• Press and hold to erase the

missed call indicator while the

phone is not in use.

• Press to return to the previous

menu; or press and hold to return

to idle mode, without making

changes.

5 –

• Press repeatedly to show other

dialing options when reviewing a

caller ID log entry.

6 – MUTE/DELETE

• Mute the microphone during a

call.

• Delete digits or characters while

using the dialing keys.

• Silence the ringer temporarily

while the handset is ringing.

7 – REDIAL/PAUSE

• Press repeatedly to review the

redial list.

• Press and hold to insert a dialing

pause while entering a number.

8 – Microphone

9 –

• Make or answer a call using the

handset speakerphone.

• During a call, press to switch

between the speakerphone and

the handset.

10 –

• Press to add a space when

entering names.

11 –

• While you have set the dial mode

to pulse and on a call, press to

switch to tone dialing temporarily.

12 – 1

• Press repeatedly to add or

remove 1 in front of the caller ID

log entry before dialing or saving

it to the phonebook.

• Press and hold to set or dial your

voicemail number.

a

b

c

d

e

f

g

h

i

j

n

p

o

k

l

m

3

13 – /HOME/FLASH

• Make or answer a home call.

• Answer an incoming home

call when you hear a call

waiting alert.

14 – /CELL

• Make or answer a cell call.

• Answer an incoming cell call

when you hear a call waiting

alert.

15 – VOLUME/ /

• Review the phonebook when the

phone is not in use.

• Increase the listening volume

during a call.

• Scroll up while in a menu, or in

the phonebook, caller ID log, or

redial list.

• Move the cursor to the right when

entering numbers or names.

VOLUME/ /CID

• Review the caller ID log when the

phone is not in use.

• Decrease the listening volume

during a call.

• Scroll down while in a menu, or

in the phonebook, caller ID log,

or redial list.

• Move the cursor to the left when

entering numbers or names.

16 – CHARGE light

• On when the handset is

charging.

Telephone base overview

1 – – /VOL/

+

• Press to adjust the volume during

message playback.

• Press to adjust the telephone

base ringer volume when the

phone is not in use.

2 – X/DELETE

• Press to delete the playing

message.

• When the phone is not in use,

press twice to delete all previously

reviewed messages.

3 – /PLAY/STOP

• P

ress to play messages.

• P

ress to stop message playback.

4 – Message window

• Shows the number of messages,

and other information of the

answering system or telephone

base.

5 – /SKIP

• Press to skip to the next

message.

a

b

c

d

e

f

g

h

i

j

k

l

4

6 – /REPEAT

• Press to repeat a message.

• Press twice to play the previous

message.

7 – /ANS ON light

• On when the answering system is

on.

8 – CELL 1 and

CELL 2/HEADSET lights

• On when the telephone base

is paired and connected with a

Bluetooth device

• Flashes when the telephone base

is in discoverable mode.

9 – CELL 1 and CELL 2/HEADSET

• Press to connect the paired cell

Bluetooth device.

• Press and hold to add or replace

a Bluetooth device.

10 – /ANS ON

• Press to turn the answering

system on or off .

11 – /FIND HANDSET

• Press to page all system

handsets.

12 – IN USE light

• On when the handset is in use,

or the answering system is

answering a call.

• Flashes when there is an

incoming call, or another

telephone sharing the same line

is in use.

Charger overview

1 – Charging pole

a

5

Display icons overview

The battery icon flashes

when the battery is low and

needs charging.

The battery icon animates

when the battery is charging.

The battery icon becomes

solid when the battery is fully

charged.

ECO The ECO mode activates

automatically to reduce

power consumption when

the handset is within range

from the telephone base.

There are new voicemail

received from your telephone

service provider.

On when the home line is in

use or there is an incoming

home call.

Flashes when there is an

incoming home waiting call.

1

2

There are Bluetooth devices

connected on the cell

devices list.

On when the cell line is in

use or there is an incoming

cell call.

Flashes when there is an

incoming cell waiting call.

NEW There are new caller ID log

entries.

ANS ON The answering system is

turned on.

The handset ringer is off.

1/25 The message number

currently playing and

total number of new/old

messages recorded.

Handset and Telephone base

lights overview

Handset lights

On when the handset

speakerphone is in use.

CHARGE On when the handset

is charging in the

telephone base or

handset charger.

Telephone base lights

IN USE On when the telephone

line is in use.

On when you are

registering a handset.

Flashes quickly when

there is an incoming

call.

Flashes when another

telephone sharing the

same line is in use.

Flashes when you

are deregistering all

handsets.

1/ 2On when a Bluetooth

device is connected to

the base.

Flashes when the

telephone base is in

discoverable mode.

/ANS ON/OFF On when the answering

system is turned on.

6

Connect

You can choose to connect the telephone

base for desktop usage or wall mounting.

NOTE

S

• Use only the adapters provided.

• Even if you do not subscribe to any

conventional telephone service, you can

pair a Bluetooth enabled cell phone to

your telephone base (see Bluetooth), and

use the cell line alone without plugging in

a telephone line cord.

• Make sure the electrical outlets are not

controlled by wall switches.

• The adapters are intended to be correctly

oriented in a vertical or ﬂoor mount

position. The prongs are not designed to

hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.

TIP

• If you subscribe to digital subscriber line

(DSL) high-speed Internet service through

your telephone line, make sure you install

a DSL filter (not included) between the

telephone line cord and telephone wall

jack. Contact your DSL service provider

for more information.

Connect the telephone base

Connect the charger

Mount the telephone base

The telephone comes ready for tabletop

use. If you have already installed the

telephone for tabletop use, unplug the

telephone line cord from the telephone

wall jack, and unplug the telephone base

power adapter from the wall outlet before

mounting your telephone on a wall.

Follow the steps below to mount your

telephone on a wall.

1. Route the telephone line cord through

the rectangular hole on the wall

mount bracket. Then plug the two

ends of the telephone line cord into

the telephone base and the wall

outlet as shown.

7

2 Align the holes on the bracket with

the standard wall plate and slide the

bracket down until it clicks securely in

place.

Install and charge the battery

Install the battery as shown below.

NOTE

S

• Use only supplied battery.

• If the handset will not be used for a long

time, disconnect and remove the battery to

prevent possible leakage.

THIS SIDE UP

4. Connect the power adapter to the

telephone base and an electrical

outlet not controlled by a wall switch.

3. Align the grooves on the telephone

base with the tabs on the wall mount

bracket, and then slide it down until it

clicks securely in place.

A

8

Charge the battery

Place the handset in the telephone base

or the charger to charge.

Once you have installed the battery,

the handset LCD display indicates the

battery status (see the table below).

NOTE

S

• For best performance, keep the handset in

the telephone base or charger when not

in use.

• The battery is fully charged after 12 hours

of continuous charging.

• If you place the handset in the telephone

base or the charger without plugging

in the battery, the screen displays

No battery.

Battery

indicators

Battery

status

Action

The screen

is blank, or

shows Put

in charger

and

ﬂashes.

The battery

has no

charge or

very little

charge. The

handset

cannot be

used.

Charge

without

interruption

(at least

30 minutes).

The screen

shows Low

battery and

ﬂashes.

The battery

has enough

charge to be

used for a

short time.

Charge

without

interruption

(at least

30 minutes).

The screen

shows

HANDSET

X.

The battery

is charged. To keep

the battery

charged,

place it in the

telephone

base or

charger when

not in use.

When it is fully charged, you can expect

the following performance:

Operation Operating time

While in handset

use (talking*) Seven hours

While in

speakerphone

mode (talking*)

Three hours

While not in use

(standby**) Five days

* Operating times vary depending on your actual

use and the age of the battery.

** Handset is not charging or in use.

CHARGE light

remains on when

charging.

9

Before use

After you install your telephone or

power returns following a power outage,

the handset will prompt you to set

the date and time, and the answering

system through voice guide.

Set date and time

NOTE

• Make sure you set the date and time

including the year correctly; otherwise the

answering system does not announce the

correct day of the week for your recorded

messages time stamp.

1. Use the dialing keys (0-9) to enter

the month (MM), date (DD) and year

(YY). Then press SELECT.

2. Use the dialing keys (0-9) to enter the

hour (HH) and minute (MM). Then

press or to choose AM or PM.

3. Press SELECT to save.

After the setting for the date and time,

the handset will display Voice guide to...

and set up Ans sys? alternatively.

Set answering system through

voice guide

This feature assists you to do the basic

setup of the answering system. You can

follow the voice guide to record your

own announcement, set the number of

rings and the message alert tone.

1. Press SELECT to start the voice

guide for the answering

system setup. You hear the voice

prompt “Hello! This voice

guide will assist you with the basic

setup of your answering system.”

2. Setup your answering system by

inputting the designated numbers as

instructed in the voice guide.

• To skip setting, press CANCEL.

Check for dial tone:

Press /HOME. If you hear a dial tone,

the installation is successful.

If you do not hear a dial tone:

• Make sure the installation procedures

described above are properly done.

• It may be a wiring problem. If you

have changed your telephone

service to digital service from a cable

company or a VoIP service provider,

the telephone line may need to be

rewired to allow all existing telephone

jacks to work. Contact your cable/

VoIP service provider for more

information.

Operating range

This cordless telephone operates with

the maximum power allowed by the

Federal Communications Commission

(FCC). Even so, this handset and

telephone base can communicate over

only a certain distance - which can

vary with the locations of the telephone

base and handset, the weather, and the

layout of your home or ofﬁce.

When the handset is out of range, the

handset displays Out of range or and

no pwr at base alternately.

If there is a call while the handset is out

of range, it may not ring, or if it does

ring, the call may not connect well when

you press /HOME or /CELL. Move

closer to the telephone base, and then

press /HOME or /CELL to answer

the call. If the handset moves out of

range during a telephone conversation,

there may be interference. To improve

reception, move closer to the telephone

base.

10

Bluetooth

Your new DS6621/DS662V telephone

system with Bluetooth wireless

technology has the following features:

• Pair and connect up to a maximum

of two cell phones with the telephone

base to make and receive cell calls.

Only one cell phone can be active on

a call at a time.

• Make and receive calls using your

cell phone plan while utilizing the

ease and comfort of your home

telephone system.

• Receive phonebook entries from your

cell phone.

IMPORTANT INFORMATION

• Refer to the user's manual of your

Bluetooth enabled cell phone for

more information about how that

device uses Bluetooth connectivity.

• Bluetooth wireless technology

operates within a short range (a

maximum of approximately 30 feet)

from the telephone base. Keep

connected cell phones within this

range. For optimal performance,

keep your cell phone within 15 feet

of the telephone base while using the

DS6621/DS662V cell line.

• If your cell phone has poor reception

in your home, the DS6621/DS662V

cannot improve the reception.

However, if there is a location in your

house with better reception, you can

leave your cell phone at that location

while using the DS6621/DS662V cell

line.

• If you experience poor sound quality,

place your cell phone closer to the

DS6621/DS662V to ensure strong

Bluetooth signal strength. Make

sure there are no physical obstacles

between the DS6621/DS662V and

the cell phone, such as large furniture

or thick walls.

• Charge your cell phone while it

is connected to the telephone

base. Your cell phone's battery will

discharge faster while it is connected

to the telephone base via Bluetooth

wireless technology.

• Monitor your cell phone's usage

because minutes are deducted from

your cellular plan for the duration of

all cell calls.

Refer to Bluetooth setup to learn how

to set up and manage your Bluetooth

enabled devices. Refer to Telephone

operation on how to operate your

Bluetooth devices with your new

DS6621/DS662V telephone system with

Bluetooth wireless technology. Refer

to Troubleshooting if you experience

difﬁculty using the telephone system.

DS6621/DS662V Cellular

signal

Less than 15 feet for

optimal performance

The Bluetooth® word mark and logos are

owned by Bluetooth SIG, Inc. and any use

of such marks by VTech Holdings Limited

is under license. VTech Holdings Limited

is a member of Bluetooth SIG, Inc. Other

trademarks and trade names are those of

their respective owners.

11

Glossary of terms

Below are some terms used in this

user’s manual to help you become

familiar with using your Bluetooth

enabled cell phone and your new

DS6621/DS662V telephone system.

Bluetooth cell phone - refers to a

Bluetooth enabled cellular telephone.

Cell line - the telephone line associated

with your cell phone service. On your

DS6621/DS662V handset, press

/CELL to use the cell line.

Connected - when you pair a Bluetooth

cell phone to the DS6621, it is

automatically connected. When a cell

phone is connected, 1 and/or 2 displays

after on the handset and the

CELL 1 and/or CELL 2/HEADSET

light on the telephone base is on. If a

cell phone loses its connection to the

telephone base, it must be reconnected

before you can use the cell phone with

the DS6621.

Disconnected - when a cell phone is

disconnected, the on the handset no

longer displays and the CELL 1 and/

or CELL 2/HEADSET light on the

telephone base is off.

Discoverable mode - before a

Bluetooth enabled device can be paired,

it must be set to this mode. When

pairing your cell phone, the telephone

base will be set to this mode. Depending

on the manufacturer, this mode is

sometimes referred to as Find Me or

Visibility.

Home line - your conventional

telephone land line. On your DS6621

handset, press /HOME/FLASH to use

the home line.

Paired device - once a Bluetooth

enabled cell phone has been paired

with the telephone base, it appears

on the cell devices list. A maximum of

two cell phones can be paired with the

telephone base.

Pairing - this refers to the process of

Bluetooth enabled cell phone registering

device information with each other.

The telephone base must be paired

with the Bluetooth enabled cell phone

before it can be used. Depending on the

manufacturer, this is also referred to as

Bonding.

PIN - by default, the PIN is 0000 for the

telephone base and for most Bluetooth

devices. PIN information must be

exchanged between Bluetooth devices

before they can be used. This is also

known as a Passkey or Passcode.

12

Bluetooth setup

To use a Bluetooth enabled cell phone with

your DS6621/DS662V, you must ﬁrst pair

and connect it with the telephone base. All

DS6621/DS662V handsets can be used to

make or answer on the cell phone line.

Bluetooth wireless technology operates

within a short range (30 feet). When

you pair a Bluetooth cell phone to the

telephone base, move closer to the

telephone base to maintain sufﬁcient

signal strength. For optimal performance,

keep your cell phone within 15 feet of the

telephone base while using the cell line.

VTech Connect to CellTM

application

If you are using Bluetooth enabled

Android® phones (OS 2.3 or higher), you

can further extend the ﬂexibility of your

telephone system with use of this

free application.

VTech Connect to Cell comprises

Caller ID manager and Alerts manager

that help you integrate your cell phone

with your new DS6621/DS662V.

To learn more

or download this

application via Google

Play® Store, Scan the

QR code on the right, or

go to

http://www.vtechphones.com/app_connect_to_cell.

Android® and Google Play® are registered

trademarks of Google Inc.

Add a Bluetooth enabled cell

phone

Before you begin, make sure that

you have cellular coverage and your

Bluetooth enabled cell phone is not

connected to any other Bluetooth

devices. Refer to your cell phone user's

manual to learn how to search for or

add new Bluetooth devices.

All paired cell phones are shown on the

cell devices list.

Once you have paired and connected a

device with the telephone base, you do

not need to repeat the procedure again

unless you want to replace the existing

paired cell phone with a new one.

To pair and connect a cell phone:

1. Choose a slot to pair the cell phone.

Press and hold CELL 1 and/or

CELL 2/HEADSET on the

telephone base for about four

seconds until the CELL 1 and/or

CELL 2/HEADSET light ﬂashes.

• If there is already a cell phone in

the slot, the existing cell phone will

be erased from cell devices list.

2. Turn on the Bluetooth feature of

your cell phone. Once your cell

phone ﬁnds your VTech phone

(VTech DS6621/DS662V), press the

appropriate key on your cell phone to

continue the pairing process.

• Your cell phone may prompt you to

enter the PIN of the telephone base.

The default PIN of the telephone

base is 0000.

• All cell phones that are connected to

the telephone base are disconnected

temporarily until the pairing process

is complete.

13

Whenthecellphoneissuccessfully

pairedandconnectedtothetelephone

base,thecorrespondingstatusicon

(1or 2)displays.Thecorresponding

devicelight( CELL 1 and/or

CELL 2/HEADSET)turnson.

• The pairing process may take up to one

minute. If the pairing process fails, turn

off the Bluetooth feature on your cell

phone and on the DS6621 by pressing

CELL 1/ CELL 2/HEADSET. Then

repeat the steps above to pair and

connect again. In some cases, it may

take you a few attempts to complete the

pairing process.

• The steps for the pairing process may

vary for different cell phones. If this

happens, follow the prompts on your

cell phone and your DS6621/DS662V to

complete the pairing process.

If you have trouble pairing your cell

phone, it may not be compatible with

your DS6621. Check the Bluetooth

compatibility list at

www.vtechphones.com.

Add a Bluetooth enabled

headset

To pair and connect a headset:

1. Press MENU on the phone when it is

not in use.

2. Press or to highlight Bluetooth,

and then press SELECT.

3. Press or to highlight

Add BT headset, and then press

SELECT. The screen displays

Search headset...

• If there is already a cell device in

the slot, the existing cell phone will

be erased from cell devices list..

4. Set your headset to discoverable

mode (refer to the user’s manual of

your headset on the Bluetooth feature

of your headset). Once your handset

ﬁnds your headset, press SELECT.

• Enter the PIN of your headset

if required. The PIN for most

Bluetooth devices is 0000 (refer

to the user’s manual of your

headset), then press SELECT.

5. When the headset is successfully

paired and connected to the

telephone base, the 2 icon displays.

The CELL 2/HEADSET device

light turns on.

• The pairing process may take up to one

minute. If the pairing process fails, turn

off the Bluetooth feature on your headset

and on the DS6621/DS662V by pressing

CELL 2/HEADSET . Then repeat the

steps above to pair and connect again.

In some cases, it may take you a few

attempts to complete the pairing process.

• When a connected headset is charging,

it may disconnect from the telephone

base and the CELL 2/HEADSET light on

the telephone base turns off. For some

headset models, you may need to turn

on the headset and reconnect it to the

telephone base again.

If you have trouble pairing your

headset, it may not be compatible

with your DS6621/DS662V. Check the

Bluetooth compatibility list at

www.vtechphones.com.

14

Auto connection

A cell device may be disconnected from

the telephone base when:

• The Bluetooth feature of your

connected cell device is turned off.

• The power of your cell device is

turned off.

• Your cell phone is not within range of

the telephone base.

When the Bluetooth feature or power on

the cell device is turned on, or it moves

within range of the base, the base will

try to reconnect to the cell device. If you

disconnect the cell device from the cell

devices list, the base will not attempt

to reconnect unless your cell device is

moved out of range and back in range

again.

Connect a paired cell phone or

headset

If you need to connect your paired cell

phone or headset to the telephone

base manually:

1. Press CELL 1 and/or

CELL 2/HEADSET on the

telephone base when it is not in

use. The CELL 1 and/or

CELL 2/HEADSET light ﬂashes.

2. When the cell phone or headset is

connected to the telephone base, you

hear two beeps. The corresponding

status icon ( 1/2) displays.

The corresponding device light

( CELL 1 and/or

CELL 2/HEADSET ) turns on.

Disconnect a paired cell phone

or headset

If you need to disconnect a paired cell

phone or headset from the telephone

base, refer to the user’s manuals of your

cell phone or headset for instructions to

disconnect a Bluetooth device.

If you press and hold CELL 1 and/or

CELL 2/HEADSET on the telephone

base, the existing paired cell phone

in that slot will be erased. See Add a

Bluetooth enabled cell phone and

Add a Bluetooth enabled headset

on how to pair and connect a new cell

phone or headset.

Review the cell devices list

1. Press MENU on the handset when it

is not in use.

2. Press or to highlight Bluetooth,

and then press SELECT.

3. Press or to highlight Device list,

and then press SELECT.

Download phonebook

You can download phonebook entries

to your DS6621 telephone system via

Bluetooth wireless technology. Each

downloaded phonebook are stored in

the handset phonebook with up to

24 digits for each phone number and

15 characters for each name.

Before downloading the phonebook,

make sure the cell phone is paired and

connected to the DS6621/DS662V.

Make sure the handset battery is

charged for at least

10 minutes.

Place your cell phone next to the

telephone base while downloading.

La page est en cours de chargement...

VTech DS6621-2 Manuel utilisateur

Ce manuel convient également à

VTech DS6621-2 Manuel utilisateur

dans d''autres langues

Documents connexes