La page est en cours de chargement...
PART NO. WW194014
NSN: 6645-01-544-0408SWISS MADE. | CANADIAN DESIGNED.
CSAR™
CHRONOGRAPH SEARCH AND RESCUE MANUAL
For detailed specs, reviews and additional
information about the CSAR watch, scan the QR code
or visit our website online.
WWW.MARATHONWATCH.COM | @MARATHONWATCH
MAN-014-01-E
CHRONOGRAPH SEARCH AND RESCUE
Marathon Search and Rescue (SAR) watches were developed to Canadian
Government requirements for use in SAR operations. Built to withstand extreme
conditions and match the capabilities of the user. First introduced in the early 1990s,
they are still in active use today.
Commonly known as the Chronograph Search and Rescue (CSAR). The CSAR is the
most coveted of our SAR Class and is considered the “Grail” of our watches.
Case Diameter
Case Thickness
Lug to Lug
Lug Width
Case
46mm
18mm
55mm
22mm
316L Stainless Steel
SPECIFICATIONS
BEZEL MARKER WITH MARAGLO™
SCREW-DOWN CROWN
MINUTE HAND WITH TRITIUM TUBE
30 MINUTE COUNTER
12 HOUR COUNTER
22MM LUGS
START/STOP SCREW-DOWN
PUSHER WITH LOCK RING
RESET SCREW-DOWN
PUSHER WITH LOCK RING
TRITIUM HOUR MARKERS
HOUR HAND WITH TRITIUM TUBE
SECONDS HAND
BEZEL
60 SECOND COUNTER HAND
WITH MARAGLO™
TECHNICAL INFORMATION
Movement
Number of Jewels
Accuracy
Calendar
Luminous Features
ETA Valjoux 7750 with Incabloc™ Shock Absorber
25
-5 to +10 s/day
Day & Date
Tritium Gas Tubes & MaraGlo™
Crystal Type
Crown Type
Bezel Type
Bezel Scale
Scale Quantity
Scale Range
Submersibility
Sapphire
Screw-Down
Uni-Directional
60 Minute
2
1 - 12 (13 - 24)
30 ATM – 300 meters (1000 feet)
TRITIUM GAS TUBES
CONSTANT ILLUMINATION
The CSAR uses self-contained tritium gas tubes to ensure constant
visibility in low light situations. A gas tube is placed on each hour marker
and hand. These tubes are self-illuminating and contain an isotope of
hydrogen, that will not dull down over time like photo-luminescent paint.
WATER RESISTANCE
30 ATM – 300 M (1000 FT)
The CSAR is made from 316L surgical-grade stainless-steel with a screw-
down crown and a synthetic sapphire crystal that allow it to operate while
submerged down to 300 meters or 1000 feet underwater.
CHRONOGRAPH FEATURE
12-HOUR TIMING
The CSAR chronograph feature consists of 2 sub-dials, a large second
hand counter and two push-pieces. The large second hand counter
registers the seconds elapsed, while the top dial registers 30 minute
intervals and the bottom dial registers 12 hours.
SWISS CRAFTSMANSHIP
LA CHAUX-DE-FONDS, SWITZERLAND
Inside the CSAR automatic is a Swiss-made, 25 jewel, ETA Valjoux 7750
with Incabloc™ Shock Absorber. These watches are hand-assembled
in La Chaux-de-Fonds, Switzerland and guarantee the highest level of
craftsmanship and accuracy.
1. Priming the movement.
Your CSAR is charged via the movement of your wrist. Out of the box, gently
move your watch back and forth to charge up the movement. Avoid hand-winding
where necessary, as this could cause damage to the movement.
2. Clean watch often.
Clean regularly using rubbing alcohol, a toothbrush and a microbre cloth.
GENERAL OPERATIONS & MAINTENANCE
3. Always set it forward.
During events such as daylight-savings, you might be inclined to wind your
watch back an hour, however this can put undue stress on the movement of your
watch. Always move the hands forward to reach your desired time setting.
4. Service regularly.
Regular servicing every four to six years will help to keep your movement
running with Marathon-level precision. For servicing requests, contact our team
directly at customerservice@marathonwatch.com
1234
SETTING THE TIME
1. Unscrew and pull the crown from position 1 to position 4.
2. Turn the crown counterclockwise to adjust the time.
3. Ensure correct AM/PM settings so that the date wheel changes
at midnight and not mid-day.
1234
SETTING THE DAY & DATE
1. Unscrew and pull the crown from position 1 to position 3.
2. Turn the crown clockwise to change the date or counterclockwise to change
the day.
CAUTION: Do not adjust the date wheel between 9pm and 3am as this may
damage the watch movement.
1 2 3 4
LOCKING THE CROWN
From position 2, push the crown into position 1 and rotate clockwise to lock the
crown back into place.
NOTE: The CSAR was designed to automatically hand-wind the watch while
screwing in the crown. Avoid hand-winding where necessary as this could cause
damage to the movement.
A
1/58