Adaptec 5325301553 Guide de démarrage rapide
- Taper
- Guide de démarrage rapide
QuickStartGuide and User CD
Kurzanleitung und Benutzer-CD
Guía de iniciación rápida y CD del usuario
Guide de mise en route rapide et CD de l'utilisateur
Installing the Snap Server 14000 in a Rack
Install the Snap Server 14000 into a rack using the rack mounting kit provided.
Warning:
The server weighs approximately 75 pounds, and rack installation requires two or more
people. In a 4-post rack, it is highly recommended that you use the rear support brackets to secure
the server to the rack. For more information, refer to the
Rack Installation Guide
or
Administrator
Guide.
1.
Plug the power cords provided into the server’s individual power connectors.
2.
Plug the other ends of the power cords into properly grounded electrical outlets.
For the greatest protection from power failures, connect each power cord to a different
uninterruptible power supply (UPS). Each UPS should have a minimum rating of 160 watt hours.
If you have only one UPS, connect one power cord to the UPS. Connect the other power cord to a
properly grounded electrical outlet. If you have no UPS available, connect each power cord to a
different properly grounded electrical outlet. (Avoid plugging both cords into one multiple-outlet
surge protector or one two-socket wall outlet.)
Connecting the Power Cords
Connecting to Your Network
Powering On the Server
Connect the server to a 10BaseT, 100BaseTX, or 1000BaseT network. Use one or both of the
Ethernet cables provided starting with the primary Ethernet connector. Using both connectors
offers advantages such as load balancing and failover.
Note:
If you use only one network connector, use the primary Ethernet connector marked '1' on
the back of the server as shown in the section, “Hardware Features.”
Turn on both power module switches on the back of the server. Then press
the power button on the front of the server and hold it down until the LCD
lights up. The LCD panel indicates boot and system status. When the
system is ready, the server name displays.
Acquiring an IP Address
1.
Install NASManager from the User CD onto a client computer.
2.
Launch NASManager.
3.
In the NASManager window,
locate the server by name
(The default server name is
SNAP
nnnnnn
, where
nnnnnn
is the
server number of your server.)
Note:
If you do not have a DHCP server on your network, you must assign an IP address manually. In
the NASManager window, select your server, then select Tools > Set IP Address. Enter a unique IP
address, and click OK. When prompted, enter
admin
for the user name and
admin
for the password.
Initializing the Server
1.
Launch your browser and enter the
Snap Server 14000 server’s name or IP address.
2.
Log in with default User Name admin and
Password admin.
3.
Complete setup with the Initial
Setup Wizard.
Note:
To learn more about configuring the server,
see the Administrator Guide and the online help.
Hardware Features
1.
Power button
2.
System status light and
network link light
3.
LCD
4.
Disk drive status lights
5.
Hot-swappable fans
6.
Power module status lights
7.
AC power on/off switches
8.
AC power supply modules
9.
Power connectors
10.
Power supply activity lights
11.
Service connector
12.
Fan status lights
13.
Primary Ethernet connector
14.
SCSI connector
15.
Secondary Ethernet connector
16.
Server number label
17.
Serial number label
User CD
Obtaining Service for Your
Snap Server 14000
To obtain service or technical support for your Snap Server 14000,
please visit our Web site at www.snapappliance.com, or call 1-888-338-SNAP.
For immediate response to a service inquiry, you can submit a question to our Technical
Support department using our Expert Knowledge Base System
http://www.snapappliance.com/support
Service für Ihren
Snap Server 14000
Sie finden den technischen Service oder Kundendienst für Ihren Snap Server 14000 auf unserer Website unter
www.snapappliance.com. Wenn Kunden sofortige Antworten auf eine Serviceanfrage wünschen, können sie mit Hilfe
unseres Expert Knowledge Base System http://www.snapappliance.com/support
Obtención de servicio de asistencia técnica para su
Snap Server 14000
Para obtener servicio o asistencia técnica para su Snap Server 14000, visite nuestro sitio Web
www.snapappliance.com. Para obtener respuesta inmediata a su solicitud de asistencia, envíelas en la forma de
preguntas a nuestro Sistema experto de base de conocimiento en http://www.snapappliance.com/support
Obtention d‘un entretien pour votre
Snap Server 14000
Pour un entretien ou une assistance technique concernant votre Snap Server 14000, vérifiez
notre site web sur www.snapappliance.com. Pour obtenir une réponse immédiate à une
demande de service, vous pouvez envoyer une question à notre service
d‘assistance technique en utilisant notre système de base de connaissances
experte http://www.snapappliance.com/support
Warranty
Garantie
Garantía
Garantie
Using the Snap Server 14000
Once installed on your network, the Snap Server 14000 appears as a server with shared folders.
You can use the server to organize and store files as you do with folders on your local hard disk.
The default server name is SNAP
nnnnnn
, where
nnnnnn
is the server number of your server. For
example, a Snap Server server with the server number 130020 would show the default server
name SNAP130020.
If your network does not have a DHCP server, you can use NASManager or the Administration
Tools to assign static IP addresses. For detailed instructions, refer to the Administrator Guide
(available as a PDF on the User CD) or use the online help.
70990572-001 Rev. A
Copyright © 2003 Snap Appliance, Inc. All rights reserved worldwide.
All other product names or company names are the property of their
respective owners.
Copyright © 2003 Snap Appliance, Inc. Alle Rechte weltweit
vorbehalten. Alle anderen Produktnamen und Firmennamen sind
Eigentum der jeweiligen Unternehmen.
Copyright © 2003 Snap Appliance, Inc. Reservados todos los derechos
en el ámbito internacional. Todos los otros nombres de productos o de
compañías son propiedad de susrespectivos propietarios.
Copyright © 2003 Snap Appliance, Inc. Tous droits réservés dans le
monde entier. Tous les autres noms de produit ou de société
appartiennent à leurs détenteurs respectifs.
Snap Appliance
2001 Logic Drive
San Jose, CA 95124 USA
888.310.SNAP (7627)
www.snapappliance.com
-
1
-
2
-
3
-
4
-
5
-
6
Adaptec 5325301553 Guide de démarrage rapide
- Taper
- Guide de démarrage rapide
dans d''autres langues
- English: Adaptec 5325301553 Quick start guide