Oracle Sun Fire X4170 M2 Product Notes

Marque: Oracle

Modèle: Sun Fire X4170 M2

Catégorie: Les serveurs

Taper: Product Notes

Ce manuel convient également à

Sun Fire X4270 M2

Sun Fire X4170 M2 and X4270 M2 Servers

Product Notes

Part No: E22382-19

July 2018

Sun Fire X4170 M2 and X4270 M2 Servers Product Notes

Part No: E22382-19

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except

as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform,

publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is

prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable:

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation,

delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental

regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the

hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous

applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all

appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this

software or hardware in dangerous applications.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of

SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered

trademark of The Open Group.

This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are

not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement

between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content,

products, or services, except as set forth in an applicable agreement between you and Oracle.

Access to Oracle Support

Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?

ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.

Référence: E22382-19

Ce logiciel et la documentation qui l'accompagne sont protégés par les lois sur la propriété intellectuelle. Ils sont concédés sous licence et soumis à des restrictions d'utilisation et

de divulgation. Sauf stipulation expresse de votre contrat de licence ou de la loi, vous ne pouvez pas copier, reproduire, traduire, diffuser, modifier, accorder de licence, transmettre,

distribuer, exposer, exécuter, publier ou afficher le logiciel, même partiellement, sous quelque forme et par quelque procédé que ce soit. Par ailleurs, il est interdit de procéder à toute

ingénierie inverse du logiciel, de le désassembler ou de le décompiler, excepté à des fins d'interopérabilité avec des logiciels tiers ou tel que prescrit par la loi.

Les informations fournies dans ce document sont susceptibles de modification sans préavis. Par ailleurs, Oracle Corporation ne garantit pas qu'elles soient exemptes d'erreurs et vous

invite, le cas échéant, à lui en faire part par écrit.

Si ce logiciel, ou la documentation qui l'accompagne, est livré sous licence au Gouvernement des Etats-Unis, ou à quiconque qui aurait souscrit la licence de ce logiciel pour le

compte du Gouvernement des Etats-Unis, la notice suivante s'applique :

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation,

delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental

regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the

hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

Ce logiciel ou matériel a été développé pour un usage général dans le cadre d'applications de gestion des informations. Ce logiciel ou matériel n'est pas conçu ni n'est destiné à être

utilisé dans des applications à risque, notamment dans des applications pouvant causer un risque de dommages corporels. Si vous utilisez ce logiciel ou ce matériel dans le cadre

d'applications dangereuses, il est de votre responsabilité de prendre toutes les mesures de secours, de sauvegarde, de redondance et autres mesures nécessaires à son utilisation dans

des conditions optimales de sécurité. Oracle Corporation et ses affiliés déclinent toute responsabilité quant aux dommages causés par l'utilisation de ce logiciel ou matériel pour des

applications dangereuses.

Oracle et Java sont des marques déposées d'Oracle Corporation et/ou de ses affiliés. Tout autre nom mentionné peut correspondre à des marques appartenant à d'autres propriétaires

qu'Oracle.

Intel et Intel Xeon sont des marques ou des marques déposées d'Intel Corporation. Toutes les marques SPARC sont utilisées sous licence et sont des marques ou des marques

déposées de SPARC International, Inc. AMD, Opteron, le logo AMD et le logo AMD Opteron sont des marques ou des marques déposées d'Advanced Micro Devices. UNIX est une

marque déposée de The Open Group.

Ce logiciel ou matériel et la documentation qui l'accompagne peuvent fournir des informations ou des liens donnant accès à des contenus, des produits et des services émanant de

tiers. Oracle Corporation et ses affiliés déclinent toute responsabilité ou garantie expresse quant aux contenus, produits ou services émanant de tiers, sauf mention contraire stipulée

dans un contrat entre vous et Oracle. En aucun cas, Oracle Corporation et ses affiliés ne sauraient être tenus pour responsables des pertes subies, des coûts occasionnés ou des

dommages causés par l'accès à des contenus, produits ou services tiers, ou à leur utilisation, sauf mention contraire stipulée dans un contrat entre vous et Oracle.

Accès aux services de support Oracle

Les clients Oracle qui ont souscrit un contrat de support ont accès au support électronique via My Oracle Support. Pour plus d'informations, visitez le site http://www.oracle.com/

pls/topic/lookup?ctx=acc&id=info ou le site http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs si vous êtes malentendant.

Contents

Using This Documentation ................................................................................. 7

Product Documentation Library ......................................................................... 7

Feedback ....................................................................................................... 7

Sun Fire X4170 M2 and X4270 M2 Servers Product Notes .................................. 9

Supported Firmware Versions ............................................................................ 9

Versions of Intel Microcode and Reference Code Used in the BIOS Firmware ........... 10

Supported Operating Systems .......................................................................... 11

Downloading an OS or Software Applications .................................................... 12

Important Operating Notes .............................................................................. 12

Software and Critical Patch Updates ......................................................... 12

Hardware Important Operating Notes ........................................................ 14

Oracle ILOM Deprecation Notices and Important Operating Notes ................. 16

Oracle ILOM Important Operating Notes ................................................... 17

Power Management Important Operating Notes .......................................... 19

Documentation for Sun Fire X4170 M2 and X4270 M2 Servers ............................. 20

Known Issues ............................................................................................... 20

Hardware Known Issues ......................................................................... 21

Software and Operating Systems Known Issues .......................................... 26

Oracle ILOM Known Issues .................................................................... 36

Documentation Known Issues .................................................................. 43

Resolved Issues ............................................................................................. 45

Oracle ILOM Resolved Issues ................................................................. 45

Hardware Resolved Issues ...................................................................... 47

Getting Server Firmware and Software .............................................................. 49

Firmware and Software Updates .............................................................. 49

Options for Accessing Firmware and Software Updates ................................ 50

Software Releases .................................................................................. 50

Contents

Getting Updates From My Oracle Support ................................................. 51

▼ Download Firmware and Software Updates From My Oracle Support ......... 51

Installing Updates Using Other Methods .................................................... 52

Oracle Support ...................................................................................... 53

6 Sun Fire X4170 M2 and X4270 M2 Servers Product Notes • July 2018

Using This Documentation

■

Overview: Provides information about supported software and firmware, new features, and

important operating guidelines for the Sun Fire X4170 M2 and X4270 M2 Servers

■

Audience: These product notes are intended for system administrators, network

administrators, and service technicians.

■

Required knowledge: Users should have an advanced understanding of server systems.

Product Documentation Library

Documentation and resources for these products and related products are available at https://

docs.oracle.com/cd/E19762-01/ and https://docs.oracle.com/cd/E19245-01/.

Feedback

Provide feedback about this documentation at https://www.oracle.com/goto/docfeedback.

Using This Documentation 7

8 Sun Fire X4170 M2 and X4270 M2 Servers Product Notes • July 2018

Sun Fire X4170 M2 and X4270 M2 Servers

Product Notes

For the most updated information about supported firmware and operating systems, important

operating notes, and known issues, refer to the latest product notes, which are available at http:

//docs.oracle.com/cd/E19245-01.

These product notes include the following information.

Description Links

Review supported firmware revisions. “Supported Firmware Versions” on page 9

Check the latest versions of code used in BIOS

firmware.

“Versions of Intel Microcode and Reference Code Used in

the BIOS Firmware” on page 10

Review supported operating systems. “Supported Operating Systems” on page 11

Review important operating notes. “Important Operating Notes” on page 12

Locate the documentation library for this product. “Documentation for Sun Fire X4170 M2 and X4270 M2

Servers” on page 20

Review known issues. “Known Issues” on page 20

Review resolved issues. “Resolved Issues” on page 45

Download the latest firmware and software updates. “Getting Server Firmware and Software” on page 49

Supported Firmware Versions

The following table identifies the Oracle Integrated Lights Out Manager (Oracle ILOM) and

BIOS firmware versions that are supported for Release 1.0 and later.

Release Version Oracle ILOM SP Firmware Version BIOS Firmware Version

1.10.1 3.2.11.20.b 08.14.01.12

1.9.1 3.2.9.22 08.14.01.12

1.9 3.2.8.21 08.14.01.12

Sun Fire X4170 M2 and X4270 M2 Servers Product Notes 9

Versions of Intel Microcode and Reference Code Used in the BIOS Firmware

Release Version Oracle ILOM SP Firmware Version BIOS Firmware Version

1.8 3.2.7.30.a 08.14.01.12

1.7.7 3.1.2.54 08.14.01.11

1.7.6 3.1.2.52 08.14.01.11

1.7.5 3.1.2.20.g 08.14.01.09

1.7.4 3.1.2.20.f 08.14.01.09

1.7.3.1 3.1.2.20.e 08.14.01.05

1.7.3 3.1.2.20.c 08.14.01.05

1.7.2 3.1.2.20.a 08.14.01.03

1.7.1 3.1.2.20.a r79988 08.14.01.03

1.7 3.1.2.20 08.14.01.01

1.6.1 3.0.16.10.d 8.12.01.04

1.6 3.0.16.10.c 08.12.01.03

1.5.1 3.0.16.10.b 08.10.01.02

1.5 3.0.16.10.a 08.10.01.02

1.4 3.0.16.10 08.08.01.02

1.3.2 3.0.14.11.b 08.06.01.08

1.3.1 3.0.14.11.a 08.06.01.08

1.3 3.0.14.11 08.06.01.08

1.2.3 3.0.9.27.c (r60665) 08.04.03.01

1.2.2 3.0.9.27.b (r60221) 08.04.03.01

1.2 3.0.9.27 (r58107) 08.04.01.10

1.1 3.0.9.22 08.03.01.03

1.0 3.0.9.15 08.01.04.05

Versions of Intel Microcode and Reference Code Used in

the BIOS Firmware

The following table lists the versions of the Intel Microcode and Reference Code used in the

BIOS firmware image for Release 1.0 and later.

Intel Software Versions Used in 1.0

and 1.1

Versions Used In 1.2 Versions Used In

1.2.x

Versions Used In

1.3, 1.3.x, 1.4, 1.5,

1.6, 1.6.x, 1.7, 1.7,

1.8, 1.9.1, 1.10.1

Intel CPU Microcode SRV_C_87 SRV_C_89 SRV_C_89 SRV_C_89

Intel RC p2.70 2.90 2.90 2.93

10 Sun Fire X4170 M2 and X4270 M2 Servers Product Notes • July 2018

Supported Operating Systems

Intel Software Versions Used in 1.0

and 1.1

Versions Used In 1.2 Versions Used In

1.2.x

Versions Used In

1.3, 1.3.x, 1.4, 1.5,

1.6, 1.6.x, 1.7, 1.7,

1.8, 1.9.1, 1.10.1

Intel CPU Reference

Code

1.06 1.08 1.08 1.08

Intel QuickPath

Interconnect (QPI)

Reference Code

1.85 1.8 1.85 1.85

Intel Memory

Reference Code

(MRC)

2.11 2.20 2.20 2.12

Supported Operating Systems

The following operating systems are supported for use with the Sun Fire X4170 M2 and X4270

M2 Servers:

■

Oracle Linux 5.5, 5.6, 5.7, 5.8, 5.9, 5.10, 5.11, 6.0, 6.1, 6.2, 6.3, 6.4, 6.5, 6.6, and 7 (64-bit)

■

Oracle Unbreakable Enterprise Kernel for Linux

■

Oracle VM 2.2.1, 2.2.2, 3.0.1, 3.0.2, 3.0.3, 3.1.1, 3.2, and 3.3

■

Oracle Solaris 11 11/11

■

Oracle Solaris 10 10/09, Oracle Solaris 10 9/10, and Oracle Solaris 10 8/11

■

Windows Server 2008 SP2 (64-bit)

■

Windows Server 2008 R2 SP1

■

Windows Server 2008 R2

■

Red Hat Enterprise Linux (RHEL) 5.5, 5.6, 5.7, 5.8, 6.0, 6.1, and 6.2 (64-bit)

■

SUSE Linux Enterprise Server (SLES) 10 SP3 and SP4 (64-bit)

■

SUSE Linux Enterprise Server (SLES) 11 (64-bit) and SLES 11 SP1 and SP2 (64-bit)

■

VMware ESX and ESXi 4.0 Update 2 and later

■

VMware ESX and ESXi 4.1 and later

■

VMware ESXi 5.0 and later

For installation instructions for the operating systems listed above, refer to:

■

Sun Fire X4170 M2 and X4270 M2 Servers Installation Guide for Linux, Virtual Machine

Software, and Oracle Solaris Operating Systems

■

Sun Fire X4170 M2 and X4270 M2 Servers Installation Guide for Windows Operating

Systems

Sun Fire X4170 M2 and X4270 M2 Servers Product Notes 11

Downloading an OS or Software Applications

Note - The Oracle Solaris 10 operating system and Oracle VM software are both available

as preinstalled options on a server disk drive. For configuration instructions for these

preinstalled options, refer to the Sun Fire X4170 M2 and X4270 M2 Servers Installation

Guide.

Downloading an OS or Software Applications

You can download an operating system (OS) or software applications for all licensed Oracle

products from Oracle Software Delivery Cloud (formerly called Oracle eDelivery). Software

is available in zip and ISO formats, which you can unzip or burn to DVDs, respectively. All of

the download links on the Oracle Technology Network (OTN) point to the Software Delivery

Cloud, making this site the authoritative source for all Oracle OS and application downloads. To

access Oracle Software Delivery Cloud, go to https://edelivery.oracle.com

Important Operating Notes

This section includes important operating information and requirements for the Sun Fire X4170

M2 and X4270 M2 Servers.

■

“Software and Critical Patch Updates” on page 12

■

“Hardware Important Operating Notes” on page 14

■

“Oracle ILOM Deprecation Notices and Important Operating Notes” on page 16

■

“Oracle ILOM Important Operating Notes” on page 17

■

“Power Management Important Operating Notes” on page 19

Software and Critical Patch Updates

■

“Server Security, Software Releases, and Critical Patch Updates” on page 12

Server Security, Software Releases, and Critical Patch

Updates

To ensure continued security of your system, Oracle strongly recommends that you apply the

latest Software Releases. Server Software Releases include Oracle ILOM, BIOS, and other

12 Sun Fire X4170 M2 and X4270 M2 Servers Product Notes • July 2018

Important – Install Latest OS Updates, Patches, and Firmware

firmware updates, often referred to as “patches.” Oracle publishes these patches regularly on the

My Oracle Support site. Applying these patches will help ensure optimal system performance,

security, and stability. You can identify the latest Software Release for your system at https://

www.oracle.com/technetwork/systems/patches/firmware/release-history-jsp-138416.

html.

To download a Software Release, go to My Oracle Support at https://support.oracle.com.

Oracle notifies customers about security vulnerability fixes for all its products four times

a year through the Critical Patch Update (CPU) program. Customers should review the

CPU advisories to ensure that the latest software release updates are applied to their Oracle

products. Note that updates for Engineered Systems will be specifically published for a specific

Engineered Systems product (that is, you need not look at specific updates for individual

software components included in your Engineered System). For more information about the

Oracle CPU program, go to https://www.oracle.com/technetwork/topics/security/

alerts-086861.html.

Oracle also recommends that you update to the latest operating system release when it becomes

available. Although a minimum operating system release is supported, updating to the latest

OS release will ensure that you have the most up-to-date software and security patches. To

confirm that you have the latest OS release, refer to the Oracle Hardware Compatibility Lists.

See “Supported Operating Systems” on page 11.

For details about the current system software update, see “Important – Install Latest OS

Updates, Patches, and Firmware” on page 13

Important – Install Latest OS Updates, Patches, and Firmware

System software release 1.10.1 is associated with system firmware version 3.2.11.20.b. Newer

system firmware versions have a higher number or letter added. For example, a future software

release might be associated with system firmware version 3.2.11.20.c.

Some product features are enabled only when the latest versions of patches and firmware are

installed. To retain optimal system performance, security, and stability, you must install the

latest operating system, patches, and firmware. For further information, see “Getting Server

Firmware and Software Updates” in the Sun Fire X4170 M2 and X4270 M2 Servers Installation

Guide.

To verify that the firmware is a minimum of 3.2.11.20.b or newer:

Use Oracle ILOM to check the system firmware version.

■

From the web interface, click System Information → Summary, then view the property

information for the System Firmware Version in the General Information table.

Sun Fire X4170 M2 and X4270 M2 Servers Product Notes 13

Important – Install Latest OS Updates, Patches, and Firmware

■

From the CLI, at the command prompt (->) type: show /System/Firmware

For more details, refer to information about viewing system information and inventory

in your server administration guide, which is available at http://www.oracle.com/goto/

x86admindiag/docs.

Ensure that the firmware version is at the minimum required version, noted

above, or a subsequent release, if available.

If the required firmware version (or newer) is not installed:

Download the firmware from My Oracle Support at https://support.oracle.

com. For more information, see Broken Link (Target ID: GQCYZ).

Install the downloaded firmware.

Refer to the information about performing firmware updates in the Oracle ILOM

Administrators Guide for Configuration and Maintenance, which is available at https:

//www.oracle.com/goto/ilom/docs. Ensure that you perform the preparatory steps

described in that document before updating the firmware.

Note - Occasionally after installing the firmware, the Oracle ILOM web interface cannot

display the power state correctly on the power control page. To correct this problem, clear your

browser cache before logging in to the Oracle ILOM web interface.

Hardware Important Operating Notes

■

“SP Might Reboot Under Heavy Workload ” on page 14

■

“Diagnosing SAS Data Path Failures on Servers Using MegaRAID Disk

Controllers” on page 15

SP Might Reboot Under Heavy Workload

The service processor (SP) on the Sun Fire X4170 M2 Server or Sun Fire X4270 M2 Server

might reboot under a heavy workload due to lack of memory caused by a Sun Fire X4170 M2/

X4270 M2 Oracle ILOM memory limitation.

To prevent SP reboots from occurring when upgrading to Oracle ILOM 3.2.x.x, or later (or to

prevent SP reboots on a system already upgraded to Oracle ILOM 3.2.x.x, or later), follow these

guidelines:

14 Sun Fire X4170 M2 and X4270 M2 Servers Product Notes • July 2018

Important – Install Latest OS Updates, Patches, and Firmware

1. When running the Oracle ILOM Snapshot utiltiy, run the fewest number of command-

line interface (CLI) or web interface sessions necessary. Keep only one interface session

running, and ideally, run the Snapshot utility using the CLI. Do not run multiple tasks

concurrently in different interface sessions.

2. If you need to run multiple interface sessions, run up to a maximum of five sessions.

The five-session limitation can include all CLI sessions, four CLI sessions with one web

interface session, or four CLI sessions with one Remote System Console session. Avoid

running or trying to open more than one web interface session or more than one Remote

System Console session simultaneously with the CLI sessions.

When updating Oracle ILOM, use the load -source PKG_URL CLI command with the

PKG_URL as a TFTP/FTP/SFTP-based protocol. Do not use an HTTP/HTTPS protocol in

the package URL, if possible. Avoid updating Oracle ILOM using the web interface by

uploading a package file or providing a PKG_URL. If the Oracle ILOM update fails, Oracle

ILOM will boot into Preboot. Use the CLI net flash command to rescue the update with

the flash file in the release:

Use the net config command to set ipdiscovery, managementport, and other

configurations. (You can list the configuration parameters using the show command.)

Use the net dhcp command to obtain the IP address if ipdiscovery is configured as

DHCP.

Use the net flash TFTP-server-IP-address path-to-flash-file command to flash

Oracle ILOM.

Diagnosing SAS Data Path Failures on Servers Using

MegaRAID Disk Controllers

On Oracle x86 servers using MegaRAID disk controllers, Serial Attached SCSI (SAS) data

path errors can occur. To triage and isolate a data path problem on the SAS disk controller, disk

backplane (DBP), SAS cable, SAS expander, or hard disk drive (HDD), gather and review the

events in the disk controller event log. Classify and analyze all failure events reported by the

disk controller based on the server SAS topology.

To classify a MegaRAID disk controller event:

■

Gather and parse the MegaRAID disk controller event logs either by running the automated

sundiag utility or manually using the MegaCLI or StorCLI commands.

■

For Oracle Exadata Database Machine database or storage cell servers, run the sundiag

utility.

■

For the Sun Fire X4170 M2 and X4270 M2 Servers, use the MegaCLI command.

For example, manually gather and parse the controller event log by using the MegaCLI

command. At the root prompt, type:

Sun Fire X4170 M2 and X4270 M2 Servers Product Notes 15

Important – Install Latest OS Updates, Patches, and Firmware

root# ./MegaCli64 adpeventlog getevents –f event.log aall

Success in AdpEventLogExit

Code: 0x00

Note - Use the existing name of the event log as the name for the disk controller event log. This

produces a MegaRAID controller event log with the given file name event.log.

The following SCSI sense key errors found in the event log in SAS data path failures indicate a

SAS data path fault:

B/4B/05 :SERIOUS: DATA OFFSET ERROR

B/4B/03 :SERIOUS: ACK/NAK TIMEOUT

B/47/01 :SERIOUS: DATA PHASE CRC ERROR DETECTED

B/4B/00 :SERIOUS: DATA PHASE ERROR

A communication fault between the disk and the host bus adapter causes these errors. The

presence of these errors, even on a single disk, means there is a data path issue. The RAID

controller, SAS cables, SAS expander, or disk backplane might be causing the interruption to

the communication in the path between the RAID controller and the disks.

Oracle Service personnel can find more information about the diagnosis and triage of hard

disk and SAS data path failures on x86 servers at the My Oracle Support web site: https:

//support.oracle.com. Refer to the Knowledge Article Doc ID 2161195.1. If there are

multiple, simultaneous disk problems on an Exadata server, Oracle Service personnel can refer

to Knowledge Article Doc ID 1370640.1.

Oracle ILOM Deprecation Notices and Important

Operating Notes

■

“Deprecation Notice for IPMI 2.0 Management Service ” on page 16

■

“Deprecation Notice for Default Self-Signed Certificate” on page 17

Deprecation Notice for IPMI 2.0 Management Service

Present Behavior: IPMI 2.0 Management Sessions - Enabled (default). Support for IPMI 2.0

client interfaces.

Future Behavior: The following IPMI Management Service changes will occur in future

Oracle ILOM firmware releases after firmware version 3.2.7.

16 Sun Fire X4170 M2 and X4270 M2 Servers Product Notes • July 2018

Important – Install Latest OS Updates, Patches, and Firmware

■

First feature change: Oracle ILOM will add a new client interface as an alternative to the

IPMI 2.0 Client interface.

■

Second feature change: The default configuration property for IPMI 2.0 Sessions will

change from Enabled to Disabled in a future release. Clients relying on IPMI 2.0 will be

unable to communicate with Oracle ILOM unless the configuration property for IPMI 2.0

Sessions is manually enabled.

■

Third feature change: Removal of IPMI 2.0 client support. IPMI 2.0 clients will no longer

be able to communicate with Oracle ILOM.

For information about IPMI Management Service support in Oracle ILOM, refer to the latest

firmware release information in the Oracle ILOM Feature Updates and Release Notes for

Firmware 3.2.x or the Oracle ILOM Protocol Management Reference for SNMP and IPMI

Firmware Release 4.0.x. To access these documents, go to https://www.oracle.com/goto/

ilom/docs.

Deprecation Notice for Default Self-Signed Certificate

Present Behavior: An earlier version of the default SSL self-signed certificate is provided by

Oracle ILOM.

Future Behavior: A newer version of the default SSL self-signed certificate will be provided in

a future Oracle ILOM firmware release.

Impact to Customer Configuration:

After updating to a future firmware release, users connecting to Oracle ILOM through the web

interface will need to accept a newer version of the default SSL self-signed certificate that is

provided by Oracle ILOM. Customer provided SSL certificates will not be impacted by this

change.

For information about the SSL self-signed certificate that is provided by Oracle ILOM, refer

to the latest firmware release information in the Oracle ILOM Feature Updates and Release

Notes for Firmware 3.2.x or the Oracle ILOM Administrator's Guide for Configuration and

Maintenance Firmware Release 4.0.x. To access these documents, go to https://www.oracle.

com/goto/ilom/docs.

Oracle ILOM Important Operating Notes

■

“Oracle ILOM Enhancement Allows Enabling IPv4 only, IPv6 only, or Dual

Stack” on page 18

■

“Ensuring Successful File Transfers from Oracle ILOM” on page 19

Sun Fire X4170 M2 and X4270 M2 Servers Product Notes 17

Important – Install Latest OS Updates, Patches, and Firmware

Oracle ILOM Enhancement Allows Enabling IPv4 only, IPv6

only, or Dual Stack

Oracle ILOM's standard network connectivity features support the ability to configure an

IPv4 network connection or a dual-stack (IPv4 and IPv6) network connection. Oracle ILOM's

enhanced network connectivity properties support the ability to configure a static IPv6 gateway

address and any of the following type of network connections: IPv4 only, IPv6 only, or dual-

stack (IPv4 and IPv6 enabled).

The following web and command-line interface (CLI) instructions provide details for viewing

and modifying the network settings that are assigned to the SP.

To modify the SP network settings from the Oracle ILOM web interface, do the following:

1. Log in to Oracle ILOM as an Administrator.

2. Click ILOM Administration > Connectivity > Network.

3. Modify the settings on the Network Settings page as required.

For further details about how to configure the properties on the Network Settings page,

click the More Details link.

4. Click Save to save your network property changes in Oracle ILOM.

Note - All user sessions on the SP are terminated upon modifying and saving IP network

property changes. To log back in to Oracle ILOM, use the newly assigned service processor

IP address.

To modify the SP network settings from the Oracle ILOM CLI, do the following:

1. Log in to Oracle ILOM as an Administrator.

2. To view the assigned IPv4 and IPv6 network settings on the SP, perform the following:

For IPv4, type: show /SP/network

For IPv6, type: show /SP/network/ipv6

3. To view the descriptions about each IPv4 and IPv6 network property, perform the

following:

For IPv4, type: help /SP/network

For IPv6, type: help /SP/network/ipv6

To modify the IPv4 and IPv6 network properties on the SP, issue the set command.

IPv4 Example:

set /SP/network state=enabled|ipv4-only|ipv6-only|disabled pendingipdiscovery=static|

dhcp pendingipaddress=value pendingipgateway=value pendingipnetmask=value

18 Sun Fire X4170 M2 and X4270 M2 Servers Product Notes • July 2018

Important – Install Latest OS Updates, Patches, and Firmware

IPv6 Example:

set /SP/network/ipv6 state=enabled|disabled

pending_static_ipaddress=value/subnet_mask_value pending_static_ipgatewayaddress=value

Note - A dual-stack network connection is enabled when both the IPv4 and IPv6 State

properties are set to enabled. By default, Oracle ILOM arrives out-of-the-box with network

settings enabled for a dual stack (IPv4 and IPv6) network connection. If the IPv4 State

property is enabled (/SP/network state=enabled) and the IPv6 State property is disabled

(/SP/network/ipv6 state=disabled), Oracle ILOM will support an IPv4-only network

connection.

5. To commit the pending network changes (IPv4 or IPv6) in Oracle ILOM, type:

set /SP/network commitpending=true

Note - All user sessions on the SP are terminated upon modifying and saving IP network

property changes. To log back in to Oracle ILOM, use the newly assigned service processor

IP address.

Ensuring Successful File Transfers from Oracle ILOM

Do not use the # ; and ? special characters in the password of a target host. If the target host

password includes these special characters, file transfers fail from Oracle ILOM to the target

host when using Uniform Resource Identifier (URI) to perform the file transfer. Examples of

these file transfers include using host storage redirection, and backing up and restoring BIOS

and SP configurations. To ensure successful file transfers between Oracle ILOM and a target

host, remove these special characters from the target host password.

Power Management Important Operating Notes

Reset Takes a Long Time and Causes the Server to Power

Cycle Due to Delayed BIOS Update

If you have a pending BIOS upgrade, a routine reset takes longer than expected and causes your

server to power cycle and reboot several times. This is expected behavior, as it is necessary to

power cycle the server to upgrade the BIOS firmware. If the upgrade includes an FPGA update,

it can take as long as 26 minutes to complete.

Sun Fire X4170 M2 and X4270 M2 Servers Product Notes 19

Documentation for Sun Fire X4170 M2 and X4270 M2 Servers

A pending BIOS upgrade exists when the following conditions are true:

■

You update the BIOS and service processor firmware using Oracle ILOM.

■

You select the Delay BIOS Upgrade option.

Caution - Firmware corruption and server down time. If you reboot the server expecting a

routine server reset and instead initiate a (delayed) BIOS upgrade, wait until the upgrade is

finished. Do not interrupt the process, as this can result in corrupted firmware and server down

time.

For details on Oracle ILOM, refer to the Oracle ILOM 3.2 Documentation Collection at https:

//docs.oracle.com/cd/E37444_01/index.html.

Documentation for Sun Fire X4170 M2 and X4270 M2

Servers

For product documentation and updated product notes for the Sun Fire X4170 M2 and X4270

M2 Servers, go to the following sites:

■

For Sun Fire X4170 M2 — https://docs.oracle.com/cd/E19762-01/

■

For Sun Fire X4270 M2 — https://docs.oracle.com/cd/E19245-01/

Known Issues

The following sections provide the latest information about known issues on the Sun Fire

X4170 M2 and X4270 M2 Servers.

■

“Hardware Known Issues” on page 21

■

“Software and Operating Systems Known Issues” on page 26

■

“Oracle ILOM Known Issues” on page 36

■

“Documentation Known Issues” on page 43

Note - The following sections list the Bug ID number of the issues. This is the identification

number assigned by the current Oracle BugDB bug tracking system. Others list the Change

Request number (the identification number assigned by the previous bug tracking system).

Either number, the Bug ID number or the CR number, can be used to access the issue in

BugDB.

20 Sun Fire X4170 M2 and X4270 M2 Servers Product Notes • July 2018

La page charge ...

Oracle Sun Fire X4170 M2 Product Notes

Marque: Oracle

Modèle: Sun Fire X4170 M2

Catégorie: Les serveurs

Taper: Product Notes

Ce manuel convient également à

Sun Fire X4270 M2

Télécharger le PDF

rapport

dans d''autres langues

English: Oracle Sun Fire X4170 M2

Oracle Sun Fire X4170 M2 Product Notes

Ce manuel convient également à

Oracle Sun Fire X4170 M2 Product Notes

dans d''autres langues

Documents connexes

Autres documents