Hach LANGE DR 900 Manuel utilisateur

DOC022.98.80344

DR 900

02/2013, Edition 1

User Manual

Bedienungsanleitung

Manuale d'uso

Manuel d'utilisation

Manual del usuario

Manual do utilizador

Uživatelská příručka

Brugsanvisning

Gebruikershandleiding

Podręcznik użytkownika

Bruksanvisning

Käyttäjän käsikirja

Ръководство на потребителя

Használati útmutató

Manual de utilizare

Naudotojo vadovas

Руководство пользователя

Kullanım Kılavuzu

Návod na obsluhu

Navodila za uporabo

Korisnički priručnik

Εγχειρίδιο χρήσης

Kasutusjuhend

English...................................................................................................................................................................................................3

Deutsch...............................................................................................................................................................................................18

Italiano.................................................................................................................................................................................................33

Français..............................................................................................................................................................................................48

Español...............................................................................................................................................................................................63

Português..........................................................................................................................................................................................78

Čeština................................................................................................................................................................................................93

Dansk.................................................................................................................................................................................................108

Nederlands......................................................................................................................................................................................123

Polski.................................................................................................................................................................................................138

Svenska............................................................................................................................................................................................154

Suomi.................................................................................................................................................................................................169

български.......................................................................................................................................................................................183

Magyar..............................................................................................................................................................................................199

Română............................................................................................................................................................................................215

lietuvių kalba...................................................................................................................................................................................230

Русский............................................................................................................................................................................................245

Türkçe................................................................................................................................................................................................262

Slovenský jazyk............................................................................................................................................................................276

Slovenski..........................................................................................................................................................................................291

Hrvatski.............................................................................................................................................................................................306

Ελληνικά...........................................................................................................................................................................................321

eesti keel..........................................................................................................................................................................................337

2

Table of contents

Specifications on page 3 Standard operation on page 10

General information on page 3 Advanced operation on page 12

Installation on page 6 Maintenance on page 15

User interface and navigation

on page 8

Troubleshooting on page 16

Startup on page 9 Replacement parts and accessories

on page 16

Specifications

Specifications are subject to change without notice.

Specification Details

Measurement mode Transmittance (%), Absorbance (Abs) and

Concentration (Conc)

Dimensions (W x D x H) 23.6 x 8.7 x 4.7 cm (9.3 x 3.4 x 1.9 in.)

Enclosure rating IP67

Weight 0.6 kg (1.3 Ib)

Power requirements (internal) AA Alkaline batteries (4x)

Battery life 6 months (typical) at 5 readings a day/5 day

week without the backlight

Interface USB mini

Operating temperature 0 to 50 °C (32 to 122 °F), maximum 90% relative

humidity non-condensing

Storage temperature –30 to 60 °C (–22 to 140 °F), maximum 90%

relative humidity non-condensing

Lamp source Light emitting diode (LED)

Detector Silicon photodiode

Specification Details

Wavelength range 420, 520, 560, 610 nm

Photometric measuring range 0–2 Abs

Wavelength accuracy ±1 nm

Photometric accuracy ±0.005 Abs at 1.0 Abs nominal

Photometric linearity ±0.002 Abs (0–1 Abs)

Wavelength selection Automatic, based on the method selection

Photometric repeatability ±0.002 Abs (0–1 Abs)

Data readout Graphical display, 240 x 160 pixel (backlit)

Sample cells 16 mm, 1 cm/10 mL, 1-inch (25 mm) round

Protection class Class III

Certifications CE certified

Warranty 2 years

General information

In no event will the manufacturer be liable for direct, indirect, special,

incidental or consequential damages resulting from any defect or

omission in this manual. The manufacturer reserves the right to make

changes in this manual and the products it describes at any time, without

notice or obligation. Revised editions are found on the manufacturer’s

website.

Safety information

N O T I C E

The manufacturer is not responsible for any damages due to misapplication or

misuse of this product including, without limitation, direct, incidental and

consequential damages, and disclaims such damages to the full extent permitted

under applicable law. The user is solely responsible to identify critical application

risks and install appropriate mechanisms to protect processes during a possible

equipment malfunction.

English 3

Please read this entire manual before unpacking, setting up or operating

this equipment. Pay attention to all danger and caution statements.

Failure to do so could result in serious injury to the operator or damage

to the equipment.

Make sure that the protection provided by this equipment is not impaired.

Do not use or install this equipment in any manner other than that

specified in this manual.

Use of hazard information

D A N G E R

Indicates a potentially or imminently hazardous situation which, if not avoided, will

result in death or serious injury.

W A R N I N G

Indicates a potentially or imminently hazardous situation which, if not avoided,

could result in death or serious injury.

C A U T I O N

Indicates a potentially hazardous situation that may result in minor or moderate

injury.

N O T I C E

Indicates a situation which, if not avoided, may cause damage to the instrument.

Information that requires special emphasis.

Precautionary labels

Read all labels and tags attached to the instrument. Personal injury or

damage to the instrument could occur if not observed. A symbol on the

instrument is referenced in the manual with a precautionary statement.

This symbol, if noted on the instrument, references the instruction

manual for operation and/or safety information.

This symbol indicates that a risk of explosion is present.

Electrical equipment marked with this symbol may not be disposed of

in European public disposal systems after 12 August of 2005. In

conformity with European local and national regulations (EU Directive

2002/96/EC), European electrical equipment users must now return

old or end-of-life equipment to the Producer for disposal at no charge

to the user.

Note: For return for recycling, please contact the equipment producer or supplier

for instructions on how to return end-of-life equipment, producer-supplied

electrical accessories, and all auxiliary items for proper disposal.

Certification

Canadian Radio Interference-Causing Equipment Regulation,

IECS-003, Class A:

Supporting test records reside with the manufacturer.

This Class A digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Cet appareil numèrique de classe A répond à toutes les exigences de la

réglementation canadienne sur les équipements provoquant des

interférences.

FCC Part 15, Class "A" Limits

Supporting test records reside with the manufacturer. The device

complies with Part 15 of the FCC Rules. Operation is subject to the

following conditions:

1. The equipment may not cause harmful interference.

4

English

2. The equipment must accept any interference received, including

interference that may cause undesired operation.

Changes or modifications to this equipment not expressly approved by

the party responsible for compliance could void the user's authority to

operate the equipment. This equipment has been tested and found to

comply with the limits for a Class A digital device, pursuant to Part 15 of

the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference

to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference, in which case the user will be

required to correct the interference at their expense. The following

techniques can be used to reduce interference problems:

1. Disconnect the equipment from its power source to verify that it is or

is not the source of the interference.

2. If the equipment is connected to the same outlet as the device

experiencing interference, connect the equipment to a different

outlet.

3. Move the equipment away from the device receiving the interference.

4. Reposition the receiving antenna for the device receiving the

interference.

5. Try combinations of the above.

Product overview

The DR 900 is a portable, LED-sourced colorimeter that measures at

wavelengths of 420, 520, 560 and 610 nm. The instrument is used to

measure various parameters in drinking water, wastewater and industrial

applications. The instrument comes with a complete set of stored

programs (pre-installed methods) and the availability of user program

storage and favorite program selection. Refer to Figure 1.

Figure 1 Instrument overview

1 USB port 4 Vent

2 Instrument cap 5 Battery compartment

3 Cell compartment 6 Power key

Product components

Make sure that all components have been received. Refer to Figure 2. If

any items are missing or damaged, contact the instrument supplier or a

sales representative immediately.

English

5

Figure 2 Product components

1 DR 900 4 Glass sample cell, 1-inch (25 mm)

round, 10, 20, 25-mL marks (2x)

2 USB cable with mini-USB connector 5 Sample cell, 1 cm/10 mL (2x)

3 AA alkaline batteries (4x) 6 Sample cell adapter

Installation

D A N G E R

Multiple hazards. Only qualified personnel must conduct the tasks

described in this section of the document.

N O T I C E

Make sure that the instrument is not exposed to direct sunlight and that no vent

blockage is caused during use or storage.

Install the batteries

W A R N I N G

Explosion hazard. Incorrect battery installation can cause the release

of explosive gases. Be sure that the batteries are of the same

approved chemical type and are inserted in the correct orientation. Do

not mix new and used batteries.

W A R N I N G

Fire hazard. Battery substitution is not permitted. Use only alkaline

batteries.

N O T I C E

Make sure to tighten the screws to 11 N·m (8 ft·lb) for a correct seal fit and to

maintain the enclosure environmental rating.

The instrument is powered with four AA alkaline batteries. Make sure

that the batteries are installed in the correct orientation. Refer to Figure 3

for the battery installation.

Figure 3 Battery installation

6 English

Install the sample cell and cell adapter

The instrument has one cell compartment which can use one adapter for

different sample cell types. Make sure to install the sample cell in the

correct orientation and in a consistent orientation so that the results are

more repeatable and precise. Refer to Figure 4. Close the instrument

cap before the instrument zero is set or a measurement is made to

prevent light interferences. Refer to Figure 5.

Figure 4 Sample cell orientation

1 1-cm/10-mL plastic sample cell 4 Orientation mark

2 1-inch (25 mm) glass sample cell 5 Orientation position (clockwise)

3 16-mm glass test vial 6 Sample cell adapter

English 7

Figure 5 Sample cell and instrument cap installation

User interface and navigation

Keypad description

Refer to Figure 6 for the keypad description and navigation information.

Figure 6 Keypad description

1 BACKLIGHT: set the display

illumination to on or off

4 RIGHT selection key (contextual):

read sample, selects or confirms

options, opens sub-menus

2 SETTINGS: setup options

1

5 Navigation keys UP, DOWN,

RIGHT, LEFT: scroll through

menus, enter numbers and letters

2

3 LEFT selection key (contextual):

access for options, cancels or exits

the current menu screen to the

previous one

6 HOME/Options: go to the main

reading screen

1

, select program,

data management

1

While in an edit mode, the key does not operate.

2

When an UP or DOWN key is held, it scrolls fast. When a LEFT or RIGHT key

is pushed, it scrolls by page.

Display description

The reading screen shows the selected mode, unit, date and time,

operator ID and sample ID. Refer to Figure 7.

8

English

Figure 7 Single screen display

1 Program name and number 7 Time and date

2 Reading value, unit, and chemical

form

8 Read (contextual: done, select,

start, ok)

3 Standard adjust icon 9 Zero (contextual: navigation key UP

arrow)

4 Battery status 10 Options (contextual: back, cancel)

5 Reagent blank icon 11 Operator identification

6 Timer 12 Sample identification

Navigation

The instrument contains menus to change various options. Use the

navigation keys (UP, DOWN, RIGHT and LEFT arrows) to highlight

different options. Push the RIGHT selection key to select an option.

Enter an option value with the navigation keys. Push the navigation keys

(UP, DOWN, RIGHT and LEFT arrows) to enter or change a value. Push

the RIGHT arrow to advance to the next space. Push the RIGHT

selection key under Done to accept the value. Push the LEFT selection

key to exit the current menu screen to the previous one.

Startup

Set the instrument to on or off

Push the POWER key to set the instrument to on or off. If the instrument

does not power on, make sure that the batteries are correctly installed.

Set the language

There are two options to set the language:

• Set the display language when the instrument is set to on for the first

time.

• Set the language from the SETTINGS menu.

1. Push SETTINGS>Setup>Language.

2. Select a language from the list.

Set the date and time

There are two options to set the date and time:

• Set the date and time when the instrument is set to on for the first

time.

• Set the date and time from the Date & Time menu.

1. Push SETTINGS>Setup>Date & Time.

2. Push Date Format and select a format for the date and time.

3. Push Date & Time.

4. Use the navigation keys to enter the current date and time, then push

Done.

English

9

Standard operation

Program list

The instrument is delivered with a complete series of application

programs. Refer to Table 1 for the program descriptions.

Table 1 Program options

Program option Description

Stored programs Stored programs are factory-installed, pre-programmed

methods. Refer to Select a stored program on page 10.

User programs Methods can be developed and can be saved as a user

program.

1

Refer to User programs on page 12.

Favorites Methods which are often used can be saved in the favorite

list.

1

A maximum of ten methods (user programs and/or favorites) can be saved.

Select a stored program

1. Push HOME>Options>All Programs.

2. Select the applicable method and push Start.

3. Select Options>Add to Favorites to add the selected method to

favorites for faster access.

Select basic program options

When a program is selected, additional parameter options are available.

1. Push Options to access the option menu.

2. Select the applicable options.

Option Description

Start Timer Select a pre-set timer or set a manual timer to make

sure that the steps of an analysis are correctly timed

(e.g., reaction times or wait times can be exactly

specified). When the timer is on, the timer icon is shown

on the display. The instrument makes an audible sound

when the time is over. Pre-set timer—Select the

applicable pre-set timer for one or more stored

procedure steps and push Start. Timer Manual—Enter

the applicable time with the navigation keys and push

Done. Default = 00:00

Favorites/User

Programs

Select from the stored favorites or user programs list.

Refer to Select a favorite or a user program

on page 12 for more information.

All Programs Select a pre-programmed method from the list.

Data Log Show all saved readings. Refer to Data log

on page 12 for more information.

Add to Favorites Save stored programs and user programs methods

which are often used in the favorites list. Refer to Add a

program to favorites on page 12.

%T/Abs/Conc Switch to % transmittance, absorbance or concentration

readings. Transmittance reading (%)—Reads the

percent of the original light that passes through the

sample and reaches the detector. Absorbance

readings—The light absorbed by the sample is read in

absorbance units. Concentration readings—The

measured absorbance values are converted into

concentration values with the program-specific stored

equation.

Advanced

Options

Use the advanced options to specify more parameters.

Refer to Select advanced program options

on page 11.

Save Save the last reading manually when the auto save

option is set to Off.

10 English

Select advanced program options

Every program has various additional advanced options from which to

select.

1. Push Options to access Options>Advanced Options.

2. Use the advanced options to specify more parameters.

Option Description

Auto Save Toggle between On and Off. Every reading is automatically

saved when the option is set to On. The reading can be

saved manually when the option is set to Off.

Chemical

Form

Select the alternate chemical form and the associated

measuring range on some factory-installed methods.

Reagent

Blank

The Reagent Blank correction can be used with some of the

factory-installed methods. Enter the result of a completed

test using deionized water as the sample. The blank value is

subtracted from every result to correct for any background

color due to reagents. Enter the blank correction before the

Standard Adjust option is used. Complete this correction for

each new lot of test reagents.

Standard

Adjust

Change stored calibration. Complete a test on a known

standard at a concentration near the top of the test range.

Use this function to adjust the result to align the standard

concentration.

Sort Program Select an alphabetical or numerical program order for the

stored program list.

Use an operator ID

The operator ID tag associates readings with an individual operator. All

stored data will include this ID.

1. Push SETTINGS>Operator ID in the reading screen.

2. Select, create or delete an operator ID:

Option Description

Current ID Select an ID from a list. The current ID will be associated

with the sample data until a different ID is selected.

Option Description

Create New ID Enter a name for a new operator ID. A maximum of

10 names can be entered.

Delete ID Erase an existing operator ID.

Use a sample ID

The sample ID tag is used to associate readings with a particular sample

or with a location. If assigned, stored data will include this ID.

1. Push SETTINGS>Sample ID in the reading screen.

2. Select, create or delete an operator ID:

Option Description

Current ID Select an ID from a list. The current ID will be associated

with the sample data until a different ID is selected.

Create New ID Enter a name for a new sample ID. A maximum of

10 names can be entered. The samples are numbered in

sequence for each measurement until a different ID is

selected (e.g., Pond 1, Pond 2).

Delete ID Erase an existing sample ID.

How to do a measurement

Basic measurement steps are necessary to complete a measurement.

Every method has a step-by-step procedure. Refer to the applicable

method to run a specific test. The example that follows is a basic

procedure to complete a measurement.

1. Select the applicable program from the programs menu (e.g., Stored

Programs, User Programs, Favorites).

2. Install the cell adapter, if necessary.

3. Push Start to start the program.

4. Prepare the blank according to the method document. Close the

sample cell and clean the optical faces of the sample cell with a lint-

free cloth.

English

11

5. Insert the blank sample cell into the cell compartment. Make sure to

install the blank sample cell in the correct and in a consistent

orientation so that the results are more repeatable and precise. Refer

to Figure 4 on page 7.

6. Close the instrument cap to prevent light interferences. Refer to

Figure 5 on page 8.

7. Push Zero. The display shows a concentration of zero (e.g., mg/L,

ABS, µg/L).

8. Prepare the sample. Add reagents as specified by the method

document.

9. Select Options>Start Timer to use the stored timers within the

program.

10. Close the sample cell and clean the optical surfaces of the cell with a

lint-free cloth

11. Insert the sample into the cell compartment. Make sure to install the

sample cell in the correct and in a consistent orientation so that the

results are more repeatable and precise. Refer to Figure 4

on page 7.

12. Close the instrument cap to prevent light interferences. Refer to

Figure 5 on page 8.

13. Push Read. The display shows the results in the selected units.

Data log

The data log shows all saved readings. Push HOME>Options>Data

Log to see the readings. Refer to Export the data log on page 15 for

information about the data log export.

Advanced operation

Select a favorite or a user program

The favorite and user programs database is empty when the instrument

is started for the first time. A method can be saved in the favorites for

faster access. A user program can be programmed for specific needs.

1. Push HOME>Options>Favorites/User Programs.

2. Push New Program to make a new user program. Refer to User

programs on page 12.

Add a program to favorites

Stored programs and user programs methods which are often used can

be saved in the favorites list.

• Select HOME>Options>Favorites/User Programs.

• Highlight the applicable program and push Options>Delete and obey

the screen prompts.

User programs

The user programs database is empty when the instrument is started for

the first time. Use New Program to make new programs for specific

needs. To make a new user program, do the steps that follow.

1. Push HOME>Options>Favorites/User Programs>New Program.

2. Select an available program number from 1001 to 1010.

Note: A maximum of ten programs (user programs and/or favorites) can be

saved.

3. Enter a method name (up to 12 characters).

4. Select the wavelength: 420, 520, 560 or 610 nm.

5. Select the unit: None, µg/L, mg/L or g/L.

6. Select the resolution: 0000, 000.0, 00.00 or 0.000.

12

English

7. Add the calibration points: a minimum of 2 and a maximum of

12 calibration points.

*

Select Edit Std 1 and enter the first standard

concentration value. Push Done.

Note: A beep means that the concentration is a duplicate of a previously

entered standard or the concentration is too high for the selected resolution.

Enter a different value and continue.

8. Enter the absorbance value:

Option Description

Edit ABS Manual Use the navigation keys to enter the absorbance value

manually.

Edit ABS Auto

1. Put the blank into the cell holder and push Zero.

2. Put the prepared sample into the cell holder and

push Read.

3. Push Done.

Note: A beep means that the absorbance is a duplicate of a previously entered

standard or that it falls between two previous standards. Enter a different value

and continue.

9. Push Done.

10. Select Add Cal Point.

11. Enter additional calibration points as described in steps 7–9.

12. Select Save User Program.

Edit a user program

To edit a stored user program:

1. Select HOME>Favorites/User Programs.

2. Select the applicable program and push Options.

3. Push Edit.

4. Obey the screen prompts to edit the procedure.

Delete a user program

Delete a stored user program if the program is not used anymore.

1. Select HOME>Options>Favorites/User Programs.

2. Highlight the applicable program and push Options>Delete and

obey the screen prompts.

Instrument information

The instrument information menu shows specific information such as the

instrument name, serial number, software version, database version,

memory used and program availability. Push

SETTINGS>Setup>Instrument Information.

Set the password

The password settings options are used to prevent access to restricted

menus.

Note: If the specified password is forgotten and Security Options is set to on, the

operator is locked out of the restricted menus. Contact technical support if the

password is forgotten.

1. Push SETTINGS>Setup>Password Settings.

2. Select an option.

Option Description

Password

Settings

Select On or Off to set the password protection to on or

off.

Protected Items Shows the list of protected items: edit operator ID, edit

sample ID, edit user programs, date & time, upgrade

firmware, upgrade methods, language and edit favorites

list.

*

If the curve is known to be linear, only two concentration data points (e.g., a standard with zero absorbance and another known standard) are

necessary. Use additional data points to confirm linearity or define a nonlinear curve.

English 13

Set the display and sound

Use the display options to change the display contrast, the battery auto-

shutoff options or the backlight option. Use the sound options for an

audible sound when a key is pushed or a reading is complete.

1. Push SETTINGS>Setup>Display & Sound>Display Options.

2. Select an option.

Option Description

Contrast Adjust the display contrast. The lightest setting is 0 and the

darkest setting is 9. Default: 5

Auto-Shutoff To maximize battery life, set a time period after which the

instrument will automatically set the power to off if no key is

pushed (5, 10, 15, 20, 30 minutes, 1 hour, 2 hours or

Disable). Default: 10 minutes

Backlight The display backlight is set to on when BACKLIGHT is

pushed. Set a time period after which the backlight will

automatically power off if no key is pushed (10, 20,

30 seconds, 1, 2, 5, 10 minutes or Disable). Default: 1 minute

3. Push SETTINGS>Setup>Display & Sound>Sounds.

4. Select an option.

Option Description

Keystroke The instrument will make an audible sound whenever a

key is pushed. Default: off

Reading

Complete

The instrument will make an audible sound whenever a

reading is complete. Default: on

USB main menu

When the instrument is connected with a USB cable to a computer, the

USB Main Menu opens. Update the software, export or import programs

or export the data log and event log from the USB Main Menu.

Update the firmware

Find the firmware upgrade file on the product website or contact the

instrument supplier. Save the file from the website to the computer.

1. Set the instrument to on and connect the USB cable to the

instrument and to the computer.

The USB Main Menu prompts.

2. Select Update DR900.

The instrument shows as a USB drive on the computer. Open the

folder.

3. Copy the file DR900.bin to the open folder.

4. Push Ok.

5. When the update is done, push Ok.

6. Select Disconnect USB, push Ok and disconnect the USB cable.

7. Push Ok.

8. Restart the instrument.

Manage programs

With the Manage Programs function, user programs can be exported

and/or imported and new factory programs can be imported.

1. Set the instrument to on and connect the USB cable to the

instrument and to the computer.

The USB Main Menu prompts.

2. Select Manage Programs and select an option:

Option Description

Export User

Programs

Export all user programs to the computer for storage

or to move the user programs to another DR 900.

Import User

Programs

Replace all user programs with the user programs

from another DR 900 via computer.

Import Factory

Programs

Import new factory programs from the manufacturer

website.

The instrument shows as a USB drive on the computer. Open the

folder.

14

English

3. Copy the export file from drive to the computer or copy the import file

from the computer to the drive.

4. Push Ok.

5. When the transfer is done, select Disconnect USB and disconnect

the USB cable.

6. Push Ok.

Export the data log

The event log and the data log can be exported to the computer. The

event log contains the date, time, event number, parameter and the

description of a configuration related action. Sample measurements are

stored manually or automatically in the data log. Refer to Select

advanced program options on page 11.

1. Set the instrument to on and connect the USB cable to the

instrument and to the computer.

The USB Main Menu prompts.

2. Select Export Datalog.

The instrument shows as a USB drive on the computer. Open the

folder.

3. Copy and save the export files (DR900_DataLog.csv and

DR900_EventLog.csv) to the computer.

4. Push Ok.

5. When the files are copied to the computer, select Disconnect USB

and disconnect the USB cable.

6. Push Ok.

Maintenance

W A R N I N G

Multiple hazards. Only qualified personnel must conduct the tasks

described in this section of the document.

Clean the instrument

Clean the exterior of the instrument with a moist cloth and a mild soap

solution and then wipe the instrument dry.

Clean the sample cells

C A U T I O N

Chemical exposure hazard. Obey laboratory safety procedures and

wear all of the personal protective equipment appropriate to the

chemicals that are handled. Refer to the current safety data sheets

(MSDS/SDS) for safety protocols.

C A U T I O N

Chemical exposure hazard. Dispose of chemicals and wastes in

accordance with local, regional and national regulations.

Most laboratory detergents are used at recommended concentrations.

Neutral detergents, such as Liquinox, are safer when regular cleaning is

necessary. To reduce the cleaning times, increase the temperature or

use an ultrasonic bath. To finish the cleaning, rinse a few times with

deionized water and let the sample cell air dry.

Cells may also be cleaned with acid, followed by a thorough rinse with

deionized water.

Note: Always use acid to clean cells that were used for low-level metal tests.

Special cleaning methods are necessary for individual procedures.

When a brush is used to clean cells, take extra care to avoid scratches

on the inner surfaces of the cells.

Replace the batteries

W A R N I N G

Explosion hazard. Expired batteries can cause hydrogen gas buildup

inside the instrument. Replace the batteries before they expire and do

not store the instrument for long periods with the batteries installed.

English 15

W A R N I N G

Fire hazard. Battery substitution is not permitted. Use only alkaline

batteries.

N O T I C E

Make sure to tighten the screws to 11 N·m (8 ft·lb) for a correct seal fit and to

maintain the enclosure environmental rating.

Refer to Install the batteries on page 6 for battery replacement.

Troubleshooting

Error

code

Possible cause Solution

1 Instrument is not configured. Contact technical support.

2 Could not read program data

3 Could not write program

data

4 Battery error Replace the batteries.

5 A/D error during a

measurement

Contact technical support.

6 Offset error during a

measurement

Make sure that the instrument cap is

correctly installed.

Error

code

Possible cause Solution

7 Low light error during a

measurement

• Make sure that there is no light

path blockage.

• Zero is out of instrument range

• Contact technical support.

8 Over range error during a

measurement, a potential

light blockage or the

concentration is too high

• Make sure that there is no light

path blockage and that the

concentration is not too high for

the program.

• Make sure that the instrument cap

is correctly installed.

• Contact technical support.

Replacement parts and accessories

W A R N I N G

Personal injury hazard. Use of non-approved parts may cause

personal injury, damage to the instrument or equipment malfunction.

The replacement parts in this section are approved by the

manufacturer.

Note: Product and Article numbers may vary for some selling regions. Contact the

appropriate distributor or refer to the company website for contact information.

Replacement parts

Description Item no.

Adapter, assembly, COD 4846400

Battery set, AA alkaline batteries (4x) 1938004

Sample cell with cap, 25 x 95 mm, 10-20-25 mL (6x) 2401906

Sample cell with cap, 1 cm/10 mL (2x) 4864302

USB cable LZV818

16 English

Accessories

Description Item no.

Cap, sample cell, for 25 x 95 mL cell 2401812

Carrying case, hard-sided 4942500

Carrying case, soft-sided with shoulder strap 2722000

Carrying case, portable laboratory 4943000

DR/Check

™

ABS standards 2763900

Instrument cap 9390500

English 17

Inhaltsverzeichnis

Technische Daten auf Seite 18 Standardbetrieb auf Seite 25

Allgemeine Informationen auf Seite 18 Fortgeschrittener Betrieb

auf Seite 28

Installation auf Seite 21 Wartung auf Seite 31

Benutzerschnittstelle und Navigation

auf Seite 23

Fehlerbehebung auf Seite 32

Inbetriebnahme auf Seite 24 Ersatzteile und Zubehör

auf Seite 32

Technische Daten

Änderungen vorbehalten.

Technische Daten Details

Messmodus Transmission (%), Absorption (Abs.) und

Konzentration (Konz.)

Abmessungen (B x T x H) 23,6 x 8,7 x 4,7 cm (9,3 x 3,4 x 1,9 Zoll)

Gehäuseschutzart IP67

Gewicht 0,6 kg (1,3 Ib)

Spannungsversorgung (intern) Alkali-Batterien 4 x Größe AA

Akkulebensdauer 6 Monate (typischer Wert) bei 5 Messwerten

pro Tag und 5 Tagen pro Woche, ohne

Hintergrundbeleuchtung

Schnittstelle USB-Mini

Betriebstemperatur 0 bis 50 °C (32 bis 122 °F), maximal 90 %

relative Luftfeuchtigkeit, nicht-

kondensierend

Lagertemperatur –30 bis 60 °C (22 bis 140 °F), maximal

90 % relative Luftfeuchtigkeit, nicht-

kondensierend

Lichtquelle Leuchtdiode (LED)

Technische Daten Details

Detektor Silizium-Photodiode

Wellenlängenbereich 420, 520, 560, 610 nm

Photometrischer Messbereich 0–2 Abs

Wellenlängengenauigkeit ±1 nm

Photometrische Genauigkeit ±0,005 Abs. bei 1,0 Abs. nominal

Photometrische Linearität ±0,002 Abs. (0–1 Abs)

Wellenlängen-Auswahl Automatisch, basierend auf der

Methodenauswahl

Photometrische

Wiederholgenauigkeit

±0,002 Abs. (0–1 Abs)

Datenanzeige Grafikfähige Anzeige, 240 x 160 Pixel

(beleuchtet)

Küvetten 16 mm, 1/cm/10 mL, 25 mm (1 Zoll) rund

Schutzklasse Klasse III

Zertifizierungen CE-zertifiziert

Garantie 2 Jahre

Allgemeine Informationen

Der Hersteller ist nicht verantwortlich für direkte, indirekte,

versehentliche oder Folgeschäden, die aus Fehlern oder

Unterlassungen in diesem Handbuch entstanden. Der Hersteller behält

sich jederzeit und ohne vorherige Ankündigung oder Verpflichtung das

Recht auf Verbesserungen an diesem Handbuch und den hierin

beschriebenen Produkten vor. Überarbeitete Ausgaben der

Bedienungsanleitung sind auf der Hersteller-Webseite erhältlich.

18

Deutsch

Sicherheitshinweise

H I N W E I S

Der Hersteller ist nicht für Schäden verantwortlich, die durch Fehlanwendung

oder Missbrauch dieses Produkts entstehen, einschließlich, aber ohne

Beschränkung auf direkte, zufällige oder Folgeschäden, und lehnt jegliche

Haftung im gesetzlich zulässigen Umfang ab. Der Benutzer ist selbst dafür

verantwortlich, schwerwiegende Anwendungsrisiken zu erkennen und

erforderliche Maßnahmen durchzuführen, um die Prozesse im Fall von möglichen

Gerätefehlern zu schützen.

Bitte lesen Sie dieses Handbuch komplett durch, bevor Sie dieses Gerät

auspacken, aufstellen oder bedienen. Beachten Sie alle Gefahren- und

Warnhinweise. Nichtbeachtung kann zu schweren Verletzungen des

Bedieners oder Schäden am Gerät führen.

Stellen Sie sicher, dass die durch dieses Messgerät bereitgestellte

Sicherheit nicht beeinträchtigt wird. Verwenden bzw. installieren Sie das

Messsystem nur wie in diesem Handbuch beschrieben.

Bedeutung von Gefahrenhinweisen

G E F A H R

Kennzeichnet eine mögliche oder drohende Gefahrensituation, die, wenn sie

nicht vermieden wird, zum Tod oder zu schweren Verletzungen führt.

W A R N U N G

Kennzeichnet eine mögliche oder drohende Gefahrensituation, die, wenn sie

nicht vermieden wird, zum Tod oder zu schweren Verletzungen führen kann.

V O R S I C H T

Kennzeichnet eine mögliche Gefahrensituation, die zu geringeren oder

moderaten Verletzungen führen kann.

H I N W E I S

Kennzeichnet eine Situation, die, wenn sie nicht vermieden wird, das Gerät

beschädigen kann. Informationen, die besonders beachtet werden müssen.

Warnhinweise

Lesen Sie alle am Gerät angebrachten Aufkleber und Hinweise.

Nichtbeachtung kann Verletzungen oder Beschädigungen des Geräts

zur Folge haben. Im Handbuch wird in Form von Warnhinweisen auf die

am Gerät angebrachten Symbole verwiesen.

Dieses Symbol am Gerät weist auf Betriebs- und/oder

Sicherheitsinformationen im Handbuch hin.

Dieses Symbol weist auf eine Explosionsgefahr hin.

Elektrogeräte, die mit diesem Symbol gekennzeichnet sind, dürfen ab

12. August 2005 nicht in öffentlichen europäischen Abfallsystemen

entsorgt werden. Benutzer von Elektrogeräten müssen in Europa in

Einklang mit lokalen und nationalen europäischen Regelungen (EU-

Richtlinie 2002/96/EG) Altgeräte kostenfrei dem Hersteller zur

Entsorgung zurückgeben.

Hinweis: Mit der Wiederverwertung, der stofflichen Verwertung oder anderen

Formen der Verwertung von Altgeräten leisten Sie einen wichtigen Beitrag zum

Schutz unserer Umwelt.

Zertifizierung

Kanadische Vorschriften zu Störungen verursachenden

Einrichtungen, IECS-003, Klasse A:

Entsprechende Prüfprotokolle hält der Hersteller bereit.

Dieses digitale Gerät der Klasse A erfüllt alle Vorgaben der kanadischen

Normen für Interferenz verursachende Geräte.

Cet appareil numèrique de classe A répond à toutes les exigences de la

réglementation canadienne sur les équipements provoquant des

interférences.

FCC Teil 15, Beschränkungen der Klasse "A"

Entsprechende Prüfprotokolle hält der Hersteller bereit. Das Gerät

entspricht Teil 15 der FCC-Vorschriften. Der Betrieb unterliegt den

folgenden Bedingungen:

Deutsch

19

1. Das Gerät darf keine Störungen verursachen.

2. Das Gerät muss jegliche Störung, die es erhält, einschließlich jener

Störungen, die zu unerwünschtem Betrieb führen, annehmen.

Änderungen oder Modifizierungen an diesem Gerät, die nicht

ausdrücklich durch die für die Einhaltung der Standards verantwortliche

Stelle bestätigt wurden, können zur Aufhebung der

Nutzungsberechtigung für dieses Gerät führen. Dieses Gerät wurde

geprüft, und es wurde festgestellt, dass es die Grenzwerte für digitale

Geräte der Klasse A entsprechend Teil 15 der FCC-Vorschriften einhält.

Diese Grenzwerte sollen einen angemessenen Schutz gegen

gesundheitsschädliche Störungen gewährleisten, wenn dieses Gerät in

einer gewerblichen Umgebung betrieben wird. Dieses Gerät erzeugt und

nutzt hochfrequente Energie und kann diese auch abstrahlen, und es

kann, wenn es nicht in Übereinstimmung mit der Bedienungsanleitung

installiert und eingesetzt wird, schädliche Störungen der

Funkkommunikation verursachen. Der Betrieb dieses Geräts in

Wohngebieten kann schädliche Störungen verursachen. In diesem Fall

muss der Benutzer die Störungen auf eigene Kosten beseitigen.

Probleme mit Interferenzen lassen sich durch folgende Methoden

mindern:

1. Trennen Sie das Gerät von der Stromversorgung, um

sicherzugehen, dass dieser die Störungen nicht selbst verursacht.

2. Wenn das Gerät an die gleiche Steckdose angeschlossen ist wie das

gestörte Gerät, schließen Sie das störende Gerät an eine andere

Steckdose an.

3. Vergrößern Sie den Abstand zwischen diesem Gerät und dem

gestörten Gerät.

4. Ändern Sie die Position der Empfangsantenne des gestörten Geräts.

5. Versuchen Sie auch, die beschriebenen Maßnahmen miteinander zu

kombinieren.

Produktübersicht

Der DR 900 ist ein tragbares Kolorimeter mit LED-Lichtquellen zur

Messung bei den Wellenlängen 420, 520, 560 und 610 nm. Das Gerät

wird zur Messung verschiedener Messgrößen in Trinkwasser, Abwasser

und industriellen Anwendungen eingesetzt. Das Gerät wird mit einem

Satz gespeicherter Programme (vorinstallierten Methoden) ausgeliefert.

Weiterhin sind Speicherplätze für Anwenderprogramme und Favoriten

vorhanden. Siehe Abbildung 1.

Abbildung 1 Messgerät

1 USB-Port 4 Entlüftung

2 Geräteabdeckkappe 5 Akkufach/Batteriefach

3 Messschacht 6 Ein/Aus-Taste

Produktkomponenten

Stellen Sie sicher, dass Sie alle Teile erhalten haben. Siehe

Abbildung 2. Wenn irgendwelche Komponenten fehlen oder beschädigt

sind, kontaktieren Sie bitte den Gerätelieferanten oder Verkäufer.

20

Deutsch

La page charge ...

Hach LANGE DR 900 Manuel utilisateur

Hach LANGE DR 900 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents