Cafe CHP95302MSS Le manuel du propriétaire

Taper
Le manuel du propriétaire

Ce manuel convient également à

Write the model and serial numbers here:
Model # _______________________________
Serial # _______________________________
You can find them on a label under the cooktop.
49-80835-1 09-18 GEA
English Français Español
Owner's Manual
Electronic Induction Cooktop
Models: CHP9530 and CHP9536
Contents
Safety Information ...............................3
Using The Cooktop
Cooktop Features ...............................5
Operating The Cooking Elements ..................6
Turn Burner(s) Off ..............................6
Selecting Cooktop Settings .......................7
How To Synchronize Left Elements .................7
Power Sharing .................................8
Cooktop Lockout ...............................8
Single Kitchen Timer ............................8
Wi-Fi Commissioning ............................9
Bluetooth
®
Pairing .............................10
Precision Cooking .............................10
Hot Light Indicator .............................13
Pan Detection Removal .........................13
Custom Settings ...............................14
How Induction Cooking Works ....................15
Cooking Noise ................................15
Choosing The Correct Cookware To Use ...........16
Griddle ......................................18
Care And Cleaning
Cleaning the Glass Cooktop .....................19
Troubleshooting Tips ...........................21
Limited Warranty ...............................22
Accessories ...................................23
Consumer Support .............................24
2 49-80835-1
THANK YOU FOR MAKING CAFÉ A PART OF YOUR HOME.
We take pride in the craftsmanship, innovation and design that goes into every Café product, and
we think you will too. Among other things, registration of your appliance ensures that we can deliver
important product information and warranty details when you need them.
Register your Café appliance now online. Helpful websites are available in the Consumer Support
section of this Owner’s Manual. You may also mail in the pre-printed registration card included in the
packing material.
49-80835-1 3
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
SAFETY INFORMATION
WARNING
Read all safety instructions before using the product. Failure to follow these instructions may result
in fire, electrical shock, serious injury or death.
WARNING
GENERAL SAFETY INSTRUCTIONS
Ŷ 8VHWKLVFRRNWRSRQO\IRULWVLQWHQGHGSXUSRVHDV
described in this Owner’s Manual.
Ŷ %HVXUH\RXUFRRNWRSLVSURSHUO\LQVWDOOHGDQG
grounded by a qualified installer in accordance with
the provided installation instructions.
Ŷ 'RQRWDWWHPSWWRUHSDLURUUHSODFHDQ\SDUWRI\RXU
cooktop unless it is specifically recommended in this
manual. All other servicing should be performed by
a qualified technician.
Ŷ %HIRUHSHUIRUPLQJDQ\VHUYLFHXQSOXJWKHFRRNWRS
or disconnect the power supply at the household
distribution panel by removing the fuse or switching
off the circuit breaker.
Ŷ 'RQRWOHDYHFKLOGUHQDORQH²FKLOGUHQVKRXOGQRW
be left alone or unattended in an area where the
cooktop is in use. They should never be allowed to
climb, sit or stand on any part of the cooktop.
Ŷ
CAUTION
Do not store items of interest to
FKLOGUHQDERYHWKHFRRNWRS²FKLOGUHQFOLPELQJRQWKH
cooktop to reach items could be seriously injured.
Ŷ 8VHRQO\GU\SRWKROGHUV²PRLVWRUGDPSSRW
holders on hot surfaces may result in burns from
steam. Do not let pot holders touch hot surface
units or heating elements. Do not use a towel or
other bulky cloth in place of pot holders.
Ŷ 1HYHUXVH\RXUFRRNWRSIRUZDUPLQJRUKHDWLQJWKHURRP
Ŷ 'RQRWWRXFKVXUIDFHHOHPHQWV7KHVHVXUIDFHV
may be hot enough to burn even though they are
dark in color. During and after use, do not touch,
or let clothing or other flammable materials contact
the surface elements or areas nearby the surface
elements; allow sufficient time for cooling first.
Ŷ 3RWHQWLDOO\KRWVXUIDFHVLQFOXGHWKHFRRNWRSDQG
areas facing the cooktop.
Ŷ 'RQRWKHDWXQRSHQHGIRRGFRQWDLQHUV3UHVVXUH
could build up and the container could burst,
causing an injury.
Ŷ &RRNPHDWDQGSRXOWU\WKRURXJKO\²PHDWWRDWOHDVW
an internal temperature of 160°F and poultry to at least
an internal temperature of 180°F. Cooking to these
temperatures usually protects against foodborne illness.
WARNING
KEEP FLAMMABLE MATERIALS AWAY FROM THE COOKTOP
Failure to do so may result in fire or personal injury.
Ŷ 'RQRWVWRUHRUXVHIODPPDEOHPDWHULDOVQHDU
the cooktop, including paper, plastic, pot holders,
linens, wall coverings, curtains, drapes and gasoline
or other flammable vapors and liquids.
Ŷ 1HYHUZHDUORRVHILWWLQJRUKDQJLQJJDUPHQWVZKLOH
using the cooktop. These garments may ignite if
they contact hot surfaces causing severe burns.
Ŷ 'RQRWOHWFRRNLQJJUHDVHRURWKHUIODPPDEOH
materials accumulate in or near the cooktop.
Grease on the cooktop may ignite.
WARNING
COOKTOP SAFETY INSTRUCTIONS
Ŷ ,QWKHHYHQWRIDILUHGRQRWXVHZDWHURUJUHDVHRQ
fires. Never pick up a flaming pan. Turn the controls
off. Smother a flaming pan on a surface unit by
covering the pan completely with a well-fitted lid,
cookie sheet or flat tray. Use a multi-purpose dry
chemical or a foam-type fire extinguisher.
Ŷ 1HYHUOHDYHWKHVXUIDFHXQLWVXQDWWHQGHGDWPHGLXP
or high heat settings. Boilovers cause smoking and
greasy spillovers that may catch on fire.
Ŷ 1HYHUOHDYHRLOXQDWWHQGHGZKLOHIU\LQJ,IDOORZHG
to heat beyond its smoking point, oil may ignite
resulting in fire that may spread to surrounding
cabinets. Use a deep fat thermometer whenever
possible to monitor oil temperature.
Ŷ 7RDYRLGVSLOORYHUDQGILUHXVHDPLQLPXPDPRXQW
of oil when shallow pan-frying and avoid cooking
frozen foods with excessive amounts of ice.
Ŷ 8VHWKHSURSHUSDQVL]HVHOHFWFRRNZDUHKDYLQJ
flat bottoms large enough to cover the surface
heating element. The use of undersized cookware
will expose a portion of the surface unit to direct
contact and may result in ignition of clothing. Proper
relationship of cookware to surface unit will also
improve efficiency.
4 49-80835-1
SAFETY INFORMATION
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
How to Remove Protective Shipping Film and Packaging Tape
Carefully grasp a corner of the protective shipping film
with your fingers and slowly peel it from the appliance
surface. Do not use any sharp items to remove the film.
Remove all of the film before using the appliance for the
first time.
To assure no damage is done to the finish of the
product, the safest way to remove the adhesive from
packaging tape on new appliances is an application of
a household liquid dishwashing detergent. Apply with a
soft cloth and allow to soak.
NOTE: The adhesive must be removed from all parts. It
cannot be removed if it is baked on.
WARNING
INDUCTION COOKTOP SAFETY INSTRUCTIONS
Ŷ 8VHFDUHZKHQWRXFKLQJWKHFRRNWRS7KHJODVV
surface of the cooktop will retain heat after the
controls have been turned off.
Ŷ 'RQRWFRRNRQDEURNHQFRRNWRS,IWKHJODVV
cooktop should break, cleaning solutions and
spillovers may penetrate the broken cooktop and
create a risk of electric shock. Contact a qualified
technician immediately.
Ŷ $YRLGVFUDWFKLQJWKHJODVVFRRNWRS7KHFRRNWRS
can be scratched with items such as knives, sharp
instruments, rings or other jewelry, and rivets on
clothing.
Ŷ 'RQRWSODFHRUVWRUHLWHPVWKDWFDQPHOWRUFDWFK
fire on the glass cooktop, even when it is not being
used. If the cooktop is inadvertently turned on, they
may ignite. Heat from the cooktop or oven vent after
it is turned off may cause them to ignite also.
Ŷ 8VH&(5$0$%5<7(
®
ceramic Cooktop Cleaner
and CERAMA BRYTE
®
Cleaning Pad to clean
the cooktop. Wait until the cooktop cools and the
indicator light goes out before cleaning. A wet
sponge or cloth on a hot surface can cause steam
burns. Some cleaners can produce noxious fumes
if applied to a hot surface. Read and follow all
instructions and warnings on the cleaning cream
label. NOTE: Sugary spills are an exception. They
should be scraped off while still hot using an oven
mitt and a scraper. See the Cleaning the glass
cooktop section for detailed instructions.
Ŷ
CAUTION
Persons with a pacemaker or
similar medical device should exercise caution
when using or standing near an induction cooktop
while it is in operation. The electromagnetic field
may affect the working of the pacemaker or similar
medical device. It is advisable to consult your
doctor or the pacemaker manufacturer about your
particular situation.
WARNING
RADIO FREQUENCY INTERFERENCE
This unit has been tested and found to comply with the
limits for a class B digital device, pursuant to Part 18
of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This unit generates, uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this unit
does cause harmful interference to radio or television
reception, which can be determined by turning the unit
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Ŷ 5HRULHQWRUUHORFDWHWKHUHFHLYLQJDQWHQQDH
Ŷ ,QFUHDVHWKHGLVWDQFHEHWZHHQWKHXQLWDQG
receiver.
Ŷ &RQQHFWWKHXQLWLQWRDQRXWOHWRUDFLUFXLWGLIIHUHQW
from that to which the receiver is connected.
WARNING
COOKTOP SAFETY INSTRUCTIONS (Cont.)
Ŷ 7RPLQLPL]HWKHSRVVLELOLW\RIEXUQVLJQLWLRQRI
flammable materials and spillage, the handle of a
container should be turned toward the center of the
range without extending over nearby surface units.
49-80835-1 5
Throughout this manual, features and appearance may vary from your model.
Cooktop Features
USING THE COOKTOP: Cooktop Features
1. Cooking Element(s): See page 6.
2. Power Level Arc: See page 6.
3. Sync Burners: See page 7.
4. Precision Cooking: See page 10.
5. Lock: See page 8.
6. Timer: See page 8.
7. Display: See page 8.
CHP9530 cooktop
CHP9536 cooktop
25
User Interface Controls
User Interface Controls
7346
25
7346
1
1
6 49-80835-1
Operating the Cooking Elements
Turn Burner(s) Off
USING THE COOKTOP: Operating the Cooking Elements / Turn Burner(s) Off
Touch On/Off pad for an individual burner.
Turn Burner(s) On: Touch and hold On/Off pad about
half a second. A chime can be heard with each touch to
any pad.
Power level can be selected in any of the following ways:
1. Swipe the gray arc (on the graphics) to the desired
power level. There is no sensor on the LEDs, or;
2. Touch Anywhere along the gray arc, or;
3. Touch + or - pads to adjust power level, or;
4. Shortcut to Hi: Immediately after turning unit on, touch
the + pad, or;
5. Shortcut to Low: Immediately after turning unit on,
touch the - pad.
Gray Arc
Swipe Area
LED
Lights
Gray Arc Swipe Area
49-80835-1 7
Selecting Cooktop Settings
USING THE COOKTOP: Selecting Cooktop Settings / How To Synchronize Left Elements
Choose the element/burner that is best fit to the
cookware size. Each element/burner on your new
cooktop has its own power levels ranging from low to
high. Power level settings necessary for cooking will vary
depending on the cookware being used, the type and
quantity of food, and the desired outcome. In general
use lower settings for melting, holding and simmering
and use higher settings for heating quickly, searing
and frying. When keeping foods warm confirm selected
setting is sufficient to maintain food temperature above
140°F. Larger elements and elements marked “Keep
Warm” are not recommended for melting.
Hi is the highest power level, designed for large quantity
rapid cooking and boiling. Hi will operate for a maximum
of 10 minutes. Hi may be repeated after the initial 10
minute cycle by pressing the + pad.
CAUTION
Do not place any cookware, utensils or
leave excess water spills on control key pads. This may
result in unresponsive touch pads and turning off the
cooktop if present for several seconds.
How To Synchronize Left Elements
NOTE: Sync Burners is only intended for cookware that spans both burners.
To Turn On
Touch the Sync Burners pad to connect the two
burners. Operate either element as previously described
to adjust power level.
To Turn Off
1. Touch the On/Off pad on either burner to turn off the
Sync Burners.
or
2. Touch the Sync Burners to turn both burners off.
Hi
boiling quickly
frying
searing
reducing
simmering
holding
melting
Low
8 49-80835-1
USING THE COOKTOP: Power Sharing / Cooktop Lockout / Single Kitchen Timer
Power Sharing
Cooktop Lockout
Single Kitchen Timer
A 36” cooktop has 3 cooking zones and a 30” cooktop
has 2 cooking zones. If two elements in the same zone
are in use and at least one element is at the maximum
power level (Hi), the Hi setting will operate at a reduced
power level. Note that the display will not change. This is
how power is shared between two elements in the same
cooking zone.
Lock
Touch Control Lock pad for 3 seconds.
Unlock
Touch Control Lock pad again for 3 seconds.
See Custom Settings section to activate Auto Lock feature.
To Turn On
Touch the Timer pad. Touch the or V arrows
to choose the desired number of minutes. Timer
automatically starts 3 seconds after pad is touched. The
“ON” LED will appear automatically when timer is set.
To Turn Off
Hold Timer pad for 3 seconds to cancel timer. Alarm
will sound continuously when time is up until user turns
timer off.
NOTE: Use the kitchen timer to measure cooking time
or as a reminder. The kitchen timer does not control the
cooking elements. Timer turns off if there is no activity
for 30 seconds.
30” Wide cooktop. 36” Wide cooktop.
Left Zone Right ZoneCenter ZoneLeft Zone Right Zone
Cooktop Lockout: locks operation of the controls
Control Lock
Indicator/Symbol
49-80835-1 9
USING THE COOKTOP: Wi-Fi Commissioning
Wi-Fi Commissioning
Turning On the Internal Wi-Fi
Hold the Precision Cooking pad for 3 seconds until display reads “Add” and is blinking. Tap twice until the
display reads “Off” and the
is blinking. Tap to turn Wi-Fi On. The icon will turn solid when complete. Open
the Café App on your mobile device and follow additional steps to connect. To exit Wi-Fi Commissioning, touch
Precision Cooking pad one time, or menu will automatically exit after 60 seconds of no user input.
Turning Off the Internal Wi-Fi
Hold the Precision Cooking pad for 3 seconds until display reads “Add” and Bluetooth symbol is blinking. Tap
twice until the display reads “On” and the and the is blinking. Tap to turn Wi-Fi Off. The icon will turn off
when complete.
10 49-80835-1
Bluetooth
®
Pairing
Precision Cooking
Pairing a Bluetooth
®
Device
Hold the Precision Cooking pad for 3 seconds until
display reads “Add” and
is blinking. Tap to initiate
pairing mode on the unit, then activate your device to
initiate the device’s pairing mode. Refer to the table
below for device specific instructions.
When
stops blinking,
device has been added.
Repeat this step for each
additional device. Up to 5
devices will be stored in
memory. To exit Pairing,
touch Precision Cooking
pad one time, or menu will
automatically exit after 60
seconds of no user input.
The Precision Cooking feature allows precise temperature control of certain cooking devices for improved results.
Initiating a Precision Cooking Mode
1. Touch the Precision Cooking pad.
2. Any burner available for Precision Cooking will flash.
This excludes any burner on in standard mode. If no
Precision Cooking devices are paired, no burners
will flash as available. NOTE: Only one burner may
run a Precision Cooking mode at a time. If another
precision mode is attempted, the burner in use for
Precision Cooking will flash.
3. The display will read “SEL”, instructing you to select a
burner to use.
4. Touch the On/Off pad for the desired burner, or press
Sync Burners to use Precision Cooking across the
two left burners.
Removing Bluetooth
®
Devices
Hold the Precision Cooking pad for 3 seconds until
display reads “Add” and is blinking. Tap so that
display shows “dEL”, then tap to delete all paired
devices. The icon will turn off when complete.
NOTE: Your unit cannot delete a single, or specific
device. After all devices are cleared, devices you wish to
use must be paired again.
USING THE COOKTOP: Bluetooth
®
Pairing / Precision Cooking
Supported Devices How to Initiate Pairing
Hestan Cue fry pan Tap pan handle
Hestan Cue pot Tap pot handle
Precision Probe Press side button once
49-80835-1 11
Precision Cooking (Cont.)
Activating a Precision Cooking Device
1. The unit must identify which device you intend to use
to adjust control parameters appropriately.
2. The display will read “Act”, instructing you to activate
a device to use on the previously selected burner.
3. Activation instructions for approved devices are listed
in the table below.
NOTE: Hestan Cue cookware can also be controlled
through the (Café Kitchen App), but functionality is
limited to temperature control only.
Precision Cooking Control Modes
There are two control modes available:
Ŷ App Control the user interacts with an application on a smart phone.
Ŷ Local Control the user interacts with the burner to set a target temperature and no App use is required.
App Control
After activating your device on your selected burner,
open the App designed to control the selected device.
Depending on the device and application, the set
temperature may be shown in the unit display, in the
App, or hidden from view.
Local Control
After activating your device on your selected burner, tap
on the burner ring to set the approximate temperature.
Small adjustments can be made by tapping the + or
pads. The set temperature will be shown in the display.
NOTE: Use of App Control mode is blocked upon
entering Local Control mode.
USING THE COOKTOP: Precision Cooking
Supported
Devices How to Activate Control with this App
Hestan Cue
fry pan Tap pan handle
Hestan Cue
(by Hestan Smart Cooking)
Hestan Cue
pot Tap pot handle
Hestan Cue
(by Hestan Smart Cooking)
Precision
Probe Press side button once
Café Kitchen
(by Café)
12 49-80835-1
Precision Cooking (Cont.)
Display Priority
To toggle the display, touch the Precision Cooking pad
to display set temperature, and touch the Timer pad
to display the kitchen timer. The kitchen timer remains
editable by using
and within the display, but a
set temperature is not editable here. Go to App if in App
Control, or burner in Local Control, to adjust temperature.
NOTE: Timer is in hours and minutes, H:MM.
USING THE COOKTOP: Precision Cooking
Precision Cooking Sync Burners
NOTE: Sync Burners is only intended for cookware that spans both burners.
To start a Precision Cooking mode using the sync burners feature, touch the Precision Cooking pad, then touch the
Sync Burners pad. When the display reads “APP”, you can now use either App Control or Local Control. For App
Control, open the App designed to control the selected device. For Local Control, tap either burner ring to set the
approximate temperature, which will be reflected on left front and left rear elements. Small adjustments can be made
by tapping the + or pads. The set temperature will be shown in the display.
49-80835-1 13
USING THE COOKTOP: Hot Light Indicator / Pan Detection Removal
Hot Light Indicator
Pan Detection Removal
A hot surface indicator light (one for each cooking
element) will glow when the glass surface is hot and will
remain on until the surface has cooled to a temperature
that is safe to touch.
When a pan is removed from the cooktop surface,
Burner level turns off; Power arc starts to blink. If a pan
is not detected for 25 seconds, the control turns off
automatically, lights turn off.
Power Arc
Hot Surface Indicator Light
14 49-80835-1
USING THE COOKTOP: Custom Settings
Custom Settings
1. Press and hold Sync Burners pad for 3 seconds,
then immediately press and hold the Timer pad for
3 seconds to enter custom settings. Those two pads
must be pressed within 30 seconds. Any other pad
will cancel mode.
2. “C - -” appears on display. To navigate through the
Custom Settings, use the (up) or (down) pads. If
(up) is selected the display cycle starts at “C01”. If
(down) is selected, the display cycle starts at “C54”.
3. To activate a new Custom Setting the user will touch
and hold the Timer pad for 3 sec. Only ONE of the
Custom Setting Choices can be activated for each
Custom Setting. The red “On” LED will turn on and a
sound will go off once a new custom setting is activated.
4. The cooktop will exit Custom Settings if it is inactive
for 3 minutes.
5. To exit Custom Settings and save any changes, touch
and hold the Sync Burners pad for 3 seconds.
* Options in grey are default settings
Custom Settings Chart
Custom Settings Custom Setting Choices
C0 (Factory Settings) C01 - Factory Reset (Clears customized settings and restores defaults)
C02 - Custom settings activated (Not visible unless any other custom setting is selected. And automatically on
when any other custom setting is selected. Not selectable by user.)
C1 (Control Lock) C11 - Standard Lock (ie; Only on when lock button pressed for 3 seconds.) If using a timer,
Control Lock is unavailable.
C12 - Auto Lock (ie; Engages after cooktop has been in standby mode for 10 minutes.) The unit should be
completely off to go into Auto Lock.
C2 (LED light level) C21 - Full illumination
C22 - Medium illumination
C23 - Lowest illumination
C3 (Button Loudness) C31 - All sounds activated at 100% (For alarm sounds, 100% = Whatever level is set in c4.)
C32 - Button sound level reduced by 50%, Alarm sounds at 100%
C33 - Button sounds deactivated, Alarm sounds activated at 100%
C4 (Timer Alarm Loudness) C41 - High
C42 - Low
C5 (Timer Alarm Duration) C51 - Indefinite (ie; alarm continues until cancelled by user).
C52 - Alarm sounds for 60 seconds.
C53 - Alarm sounds for 30 seconds.
C54 - Alarm sounds for 15 seconds.
49-80835-1 15
How Induction Cooking Works
USING THE COOKTOP: How Induction Cooking Works / Cooking Noise
Cooking Noise
The elements beneath the cooking surface produce a
magnetic field that causes the electrons in the ferrous
metal pan to vibrate and produce heat.
The cooking surface itself does not heat. Heat is
produced in the cooking pan, and cannot be generated
until a pan is placed on the cooking surface.
When the element is activated, the pan begins to heat
immediately and in turn heats the contents of the pan.
Magnetic induction cooking requires the use of cookware
PDGHRIIHUURXVPHWDOV²PHWDOVWRZKLFKPDJQHWVZLOO
stick, such as iron or steel.
Use pans that fit the element size. The pan must be large
enough for the safety sensor to activate an element.
The cooktop will not operate if a very small steel or iron
utensil (less than the minimum size across the bottom)
is placed on the cooking surface when the unit is turned
RQ²LWHPVVXFKDVVWHHOVSDWXODVFRRNLQJVSRRQV
knives and other small utensils.
Cookware “noise”
Slight sounds may be produced by different types
of cookware. Heavier pans such as enameled cast
iron produce less noise than a lighter weight multi-ply
stainless steel pan. The size of the pan, and the amount
of contents, can also contribute to the sound level.
When using adjacent elements that are set at certain
power level settings, magnetic fields may interact and
produce a low whistle or intermitted “hum”. These
noises can be reduced or eliminated by lowering or
raising the power level settings of one or both of the
elements. Pans that completely cover the element ring
will produce less noise.
A low “humming” noise is normal particularly on high
settings.
Sounds you may hear: You may hear a slight “Buzz”
when cooking with Hi mode. This is normal. The sound
depends on the type of pot being used. Some pots will
“Buzz” louder depending on the material. A “Buzz” sound
may be heard if the pan contents are cold. As the pan
heats, the sound will decrease. If the power level is
reduced, the sound level will go down.
Use the minimum size pan for the element. The pan
material is correct if a magnet sticks to the bottom.
Min. Size
16 49-80835-1
Using the correct size cookware
Pans that are not ferrous or are too small will not allow
the induction element to turn on, and the ON indicator for
that element location will flash for 25 seconds and then
turn off. If a pan is removed for more than 25 seconds,
the power will be shut off.
Cookware larger than the element ring may be used;
however, heat will only occur above the element.
For best results, the cookware must make FULL contact
with the glass surface.
Do not allow the bottom of the pan or cookware to touch
the surrounding metal cooktop trim or to overlap the
cooktop controls.
For best performance, match the pan size to the element
size. Using a smaller pot on a larger burner will generate
less power at any given setting.
Suitable Cookware
Use quality cookware with heavier bottoms for better
heat distribution and even cooking results. Choose
cookware made of magnetic stainless steel, enamel
coated cast iron, enameled steel and combinations of
these materials.
Some cookware is specifically identified by the
manufacturer for use with induction cooktops. Use a
magnet to test if the cookware will work.
Flat-bottomed pans give best results. Pans with rims or
slight ridges can be used.
Round pans give best results. Pans with warped or
curved bottoms will not heat evenly.
For wok cooking, use a flat-bottomed wok. Do not use a
wok with a support ring.
Use a flat-bottomed wok.
Use a griddle.
Use flat-bottomed pans.
30” wide cooktop.
Use the minimum recommended size pan shown
for each cooking element.
36” wide cooktop.
Use the minimum recommended size pan shown
for each cooking element.
5” Min. Dia.
Pan Size
5” Min. Dia.
Pan Size
4-1/2” Min.
Dia. Pan Size
7” Min. Dia.
Pan Size
5-1/4” Min. Dia.
Pan Size
5” Min. Dia.
Pan Size
5” Min. Dia.
Pan Size
4-1/2” Min.
Dia. Pan
Size
7” Min. Dia.
Pan Size
USING THE COOKTOP: Choosing the Correct Cookware to Use
Choosing the Correct Cookware to Use
49-80835-1 17
USING THE COOKTOP: Choosing the Correct Cookware to Use
Cookware Recommendations
Cookware must fully contact the surface of the cooking
element.
Use flat-bottomed pans sized to fit the cooking element
and also to the amount of food being prepared.
Induction interface disks are NOT recommended.
Precision Device Minimum Temperatures
Device temperature ranges are dependent on burner size:
Using the Precision Probe at low temperatures
If you are experiencing trouble maintaining lower set
temperatures with a precision probe, try changing your
set-up by:
Ŷ 5HPRYHWKHOLGIURPWKHSRW
Ŷ 8VHDODUJHUGLDPHWHUSRW
Ŷ 8VHDVPDOOHUEXUQHUZLWKDSRWODUJHUWKDQWKHEXUQHU
Cookware not centered on
cooking element surface.
Curved or warped pan bottoms
or sides.
Pan does not meet the minimum
size required for the cooking
element used.
Cookware centered correctly
on cooking element surface.
Flat pan bottom.
Pan size meets or exceeds the
recommended minimum size
for the cooking element used.
INCORRECT
CORRECT
Pan bottom rests on cooktop
trim or does not rest completely
on the cooktop surface.
Heavy handle tilts pan.
Pan is partially magnetic
on the bottom.
Pan is completely magnetic
on the bottom.
Pan bottom rests completely on
the cooktop surface.
Pan is properly balanced.
Choosing the Correct Cookware to Use (Cont.)
Device
Small to Medium
Burners (A) Large Burners (B)
Hestan Cue pan 100°F – 500°F 150°F – 500°F
Precision Probe 100°F – 200°F 120°F – 200°F
A
A
A
B
A
A
B
A
B
18 49-80835-1
Using the Griddle
CAUTION
Burn Hazard
Ŷ Griddle surfaces may be hot enough to cause burns during and after use. Place and remove the
griddle when it is cool and all surface units are off. Use oven mitts if you will touch the griddle while
hot. Failure to do so can result in burns.
Ŷ Place and remove the griddle only when griddle is cool and all surface burners are turned OFF.
Before using this cookware for the first time, wash it to make sure it is clean. Then season it lightly, rubbing cooking
oil onto the cooking surface.
How To Place The Griddle
IMPORTANT: Always place and use your griddle at the
designated location on the cooktop.
IMPORTANT NOTES:
Ŷ Clean the griddle with a sponge and mild detergent
in warm water. DO NOT use blue or green scrubbing
pads or steel wool.
Ŷ Avoid cooking extremely greasy foods and be careful
of grease spillover while cooking.
Ŷ Never place or store any items on the griddle, even
when it is not in use. The griddle can become heated
when using the surrounding surface units.
Ŷ Avoid using metal utensils with sharp points or rough
edges, which might damage the griddle. Do not cut
foods on the griddle.
Ŷ Do not use cookware as a storage container for food or
oil. Permanent staining and/or craze lines could result.
Ŷ Your griddle will discolor over time with use.
Ŷ Do not clean the griddle in a self-cleaning oven.
Ŷ Always allow the cookware to cool before immersing
in water.
Ŷ Do not overheat the griddle.
Griddle Operation
To turn on the surface units for the entire griddle, use the
Sync Burners control feature. Touch the Sync Burners
pad and then adjust power level to desired setting as
described on page 7.
USING THE COOKTOP: Griddle
Griddle
Griddle settings are intended to be a guideline and may need to be
adjusted based on individual cooking preferences.
Type of Food Cook Setting
Warming Tortillas Med-Lo
Pancakes Med-Lo
Hamburgers Med
Fried Eggs
Med-Lo
Breakfast Sausage Links Med
Hot Sandwiches (such as Grilled Cheese) Med-Lo
49-80835-1 19
Normal Daily Use Cleaning
ONLY use CERAMA BRYTE
®
Ceramic Cooktop
Cleaner on the glass cooktop. Other creams may not
be as effective.
To maintain and protect the surface of your glass cooktop,
follow these steps:
1. Before using the cooktop for the first time, clean it
with CERAMA BRYTE
®
Ceramic Cooktop Cleaner.
This helps protect the top and makes cleanup easier.
2. Daily use of CERAMA BRYTE
®
Ceramic Cooktop
Cleaner will help keep the cooktop looking new.
3. Shake the cleaning cream well. Apply a few drops of
CERAMA BRYTE
®
Ceramic Cooktop Cleaner directly
to the cooktop.
4. Use a paper towel or
CERAMA BRYTE
®
Cleaning
Pad for Ceramic Cooktops
to clean the entire cooktop
surface.
5. Use a dry cloth or paper
towel to remove all cleaning
residue. No need to rinse.
NOTE: It is very important that
you DO NOT heat the cooktop
until it has been cleaned
thoroughly.
Burned-On Residue
NOTE: DAMAGE to your glass surface may occur if you
use scrub pads other than those recommended.
1. Allow the cooktop to cool.
2. Spread a few drops of CERAMA BRYTE
®
Ceramic
Cooktop Cleaner on the entire burned residue area.
3. Using the included CERAMA BRYTE
®
Cleaning Pad
for Ceramic Cooktops, rub the residue area, applying
pressure as needed.
4. If any residue remains, repeat the steps listed above
as needed.
5. For additional protection, after all residue has been
removed, polish the entire surface with CERAMA
BRYTE
®
Ceramic Cooktop Cleaner and a paper towel.
Heavy, Burned-On Residue
1. Allow the cooktop to cool.
2. Use a single-edge razor blade scraper at approximately
a 45° angle against the glass surface and scrape the
soil. It will be necessary to apply pressure to the razor
scraper in order to remove the residue.
3. After scraping with the razor scraper, spread a few drops
of CERAMA BRYTE
®
Ceramic Cooktop Cleaner on the
entire burned residue area. Use the CERAMA BRYTE
®
Cleaning Pad to remove any remaining residue.
4. For additional protection, after all residue has been
removed, polish the entire surface with CERAMA
BRYTE
®
Ceramic Cooktop Cleaner and a paper towel.
Clean your cooktop after each
spill. Use CERAMA BRYTE
®
Ceramic Cooktop Cleaner.
The CERAMA BRYTE
®
Ceramic Cooktop Scraper and all
recommended supplies are available through our Parts Center.
See instructions under “Assistance / Accessories” section.
NOTE: Do not use a dull or nicked blade.
CARE AND CLEANING: Cleaning the Glass Cooktop
Cleaning the Glass Cooktop
Use a CERAMA BRYTE
®
Cleaning
Pad for Ceramic Cooktops.
20 49-80835-1
Metal Marks and Scratches
1. Be careful not to slide pots and pans across your
cooktop. It will leave metal markings on the cooktop
surface.
These marks are removable using the CERAMA
BRYTE
®
Ceramic Cooktop Cleaner with the CERAMA
BRYTE
®
Cleaning Pad for Ceramic Cooktops.
2. If pots with a thin overlay of aluminum or copper
are allowed to boil dry, the overlay may leave black
discoloration on the cooktop.
This should be removed immediately before heating
again or the discoloration may be permanent.
NOTE: Carefully check the bottom of pans for roughness
that would scratch the cooktop.
Damage from Sugary Spills and Melted Plastic
Special care should be taken when removing hot substances to avoid permanent damage of the glass surface.
Sugary spillovers (such as jellies, fudge, candy, syrups) or melted plastics can cause pitting of the surface of your
cooktop (not covered by the warranty) unless the spill is removed while still hot. Special care should be taken when
removing hot substances.
Be sure to use a new, sharp razor scraper.
Do not use a dull or nicked blade.
1. Turn off all surface units. Remove hot pans.
2. Wearing an oven mitt:
a. Use a single-edge razor blade scraper to move
the spill to a cool area on the cooktop.
b. Remove the spill with paper towels.
3. Any remaining spillover should be left until the surface
of the cooktop has cooled.
4. Don’t use the surface units again until all of the
residue has been completely removed.
NOTE: If pitting or indentation in the glass surface has
already occurred, the cooktop glass will have to be
replaced. In this case, service will be necessary.
Cleaning the Glass Cooktop (Cont.)
CARE AND CLEANING: Cleaning the Glass Cooktop
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

Cafe CHP95302MSS Le manuel du propriétaire

Taper
Le manuel du propriétaire
Ce manuel convient également à