1 – ENGLISH
IL95
V0715
FRANCAIS ESPAÑOL ENGLISH
2 – ENGLISH
3 – ENGLISH
Important Safety Instructions
When using your portable phone amplifier, always follow basic safety precautions to reduce
the risk of fire, electrical shock and injury to persons or property, including the following:
1 Read and understand all instructions, warnings and product markings.
2 Do not use this product near or in water or when you are wet.
3 Do not open this product case as you may expose yourself to hazardous
voltages or other risks. Opening the product case automatically voids the
warranty.
2 – ENGLISH
3 – ENGLISH
1 Power Indicator Light
2 Volume
3 Tone
4 Telephone Jack (Base)
5 Boost Button
6 Handset Jack
7 AC Power Adapter Jack
8 12 Position Compatibility
Switch
4
2
6
1
3
5
7
8
4 – ENGLISH
5 – ENGLISH
INSTALLATION
1 Unplug the handset cord from your telephone base. Insert this cord into the
jack marked “HANDSET.”
2 Plug one side of the short phone cord (included) into the jack marked
“BASE.” Plug the other end into the telephone base.
3 Set the Compatibility Switch to the “4” setting. This setting provides
compatibility for most telephones
4 Attach the AC Power Adapter to the IL95 (located on the upper left hand
side of the unit) and plug the other end into a working electrical outlet.
5 Pick up the handset. If you hear a dial tone, your IL95 Amplifier is installed
properly.
6 Be sure to register your product online at www.clearsounds.com.
If you do not hear a dial tone or the person you are calling cannot hear you, consult the
telephone compatibility section.
4 – ENGLISH
5 – ENGLISH
OPERATION
You can adjust the volume level by using the Volume Control Slide (left control). Pushing the
slide up increases the volume.
You can adjust the tone by using the Tone Control Slide (right control). Adjust the Tone Control
until you find a position that provides the clearest sound.
If you require additional amplification at any point in your conversation, simply press & hold
the Boost Button. When the Boost Button is pressed, the microphone in the handset is muted.
Release the Boost Button when you want to speak.
The power indicator light comes on each time you pick up the handset to indicate that the power level
is ok. If the indicator light does not come on, check your adapter connections.
Telephone Compatibility
Because not all telephone handsets are wired in a standard way, we have provided a
12-position compatibility switch to adjust the compatibility switch:
1 Press & hold the “on-hook” switch on your telephone or place the handset
in the cradle.
2 Adjust the switch by turning it one “click” to the next setting.
6 – ENGLISH
7 – ENGLISH
3 Release the “on-hook” switch or pick up the handset and listen for a dial tone.
4 Continue this process until you hear a dial tone and the microphone is
functional. Once you have located the proper setting, make a note of it
in the event it is changed accidentally or you use your IL95 on a different
phone.
NOTE: The IL95 cannot be used on any telephone where the keypad is located in the
handset.
Troubleshooting
If, after installing your IL95 Amplifier, you do not have a dial tone or the person you called
cannot hear you, take the following steps:
1 Check that all connections are plugged in properly
2 Make sure power is connected
3 Either disconnect the unit or use another phone and check that your phone
service is working properly.
4 Change the compatibility setting dial located on the bottom of the unit.
6 – ENGLISH
7 – ENGLISH
FCC WANTS YOU TO KNOW
Your new product has been registered with the Federal Communication Commission
(FCC). This product complies with standards in Part 68 of the FCC Rules. The FCC
requires us to provide you with the following information:
Connection and Use with the Nationwide Telephone Network
The FCC requires that you connect your product to the nationwide telephone network
through a modular telephone outlet or jack. The modular telephone outlet or jack to
which the telephone must be connected is a USOC RJ-11C or RJ-11W. This equipment
may not be used with Party Line Service or with Coin Telephone Lines.
Notification to the Telephone Company
The FCC requires that upon request of your local telephone company, you provide the
following information: a) The “line” to which you will connect the telephone equipment
(that is, your phone number), and b) The telephone equipment’s FCC registration
number and ringer equivalence number (REN). These numbers are on the back or
bottom of your telephone equipment. The REN is used to determine how many devices
you may connect to your telephone line and still have them ring when your telephone
line is called. In most, but not all areas, the sum of all REN’s should be 5 or less. You
may want to contact your local telephone company.
8 – ENGLISH
9 – ENGLISH
Repair Instructions
If it is determined that your telephone equipment is malfunctioning, the FCC requires that
it not be used and that it be unplugged from the modular outlet until the problem has been
corrected. Repairs to the telephone equipment can only be made by the manufacturer
or its authorized agents or by others who may be authorized by the FCC. For repair
procedures, follow instruction outlined under the “Limited Warranty”.
Rights of the Telephone Company
If your product is causing harm to the telephone network, the telephone company may
temporarily discontinue your telephone service. If possible, they’ll notify you before
they interrupt service. If advance notice isn’t practical, you’ll be given the opportunity
to correct the problem, and you will be informed of your right to file a complaint with
the FCC notified as soon as possible. Your telephone company may make changes in its
facilities, equipment, operations, or procedures that could affect the proper functioning
of your product. If such changes are planned, you will be notified.
Interference Information: Part 15 of FCC Rules
Some telephone equipment generates, uses, and can radiate radio-frequency energy and,
if not installed and used properly, may cause interference to radio and television reception.
Your product has been tested and found to meet the standards for a Class B
8 – ENGLISH
9 – ENGLISH
digital device, as specified in Part 15 of the FCC Rules. These specifications are designed to
provide reasonable protection against such interference in a residential installation. However,
there is no guarantee that interference will not occur in a particular installation. If your product
causes interference to radio or television reception when it is in use, you might correct the
interference with any one or all of these measures: (a) where it can be done safely, reorient
the receiving television or radio antenna. (b) To the extent possible, relocate the television,
radio or other receiver with respect to the telephone equipment. (c) If your telephone product
runs on AC power, plug your product into an AC outlet that is not on the same circuit as the
one used by your radio or television.
INDUSTRY CANADA CS03 STATEMENT
This product meets the applicable Industry Canada technical specifications. This is confirmed
by the registration number. The abbreviation, IC before the registration number signifies that
registration was performed based on a Declaration of Conformity indicating that Industry
Canada technical specifications were met. It does not imply that Industry Canada approved
the equipment.
Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The equipment
must also be installed using an acceptable method of connections. The customer
should be aware that compliance with the above conditions may not prevent degradation
of service in some situations.
10 – ENGLISH
11 – ENGLISH
Repairs to certified equipment should be made by an authorized Canadian maintenance
facility designated by the supplier. Any repairs or alterations made by the user of this
equipment, or equipment malfunctions, may give the telecommunications company
cause to request the user to disconnect the equipment.
WARNING! Users should not attempt to make such connections themselves, but should
contact the appropriate electric inspection authority, or an electrician, as appropriate.
CAUTION: The Ringer Equivalence Number (REN) assigned to each terminal device
provides an indication of the maximum number of terminals allowed to be connected to
a telephone interface.
The termination on an interface may consist of any combination of devices subject only
to the requirement that the sum of the Ringer Equivalence Numbers of all the devices
does not exceed 5. An alternative indication of the REN is the Load Number (LN); this
number should be divided by 20 to approximate the equivalent REN. The REN Number
of this unit is indicated on the bottom of your answering machine.
If your home has specially wired alarm equipment connected to the telephone line,
ensure the installation of TALK500 does not disable your alarm equipment. If you have
questions about what will disable alarm equipment, consult your telephone company or
a qualified installer.
10 – ENGLISH
11 – ENGLISH
This Class B digital apparatus complies with Canadian ICES-003.
LIMITED ONEYEAR WARRANTY
The product is warranted by ClearSounds
®
against manufacturing defect in material
and workmanship under normal use for one (1) year from the date of purchase. Should
you experience a problem, contact our customer service department or visit our website
at www.clearsounds.com.
Be sure to save your sales receipt as proof of purchase date should you need warranty
service.
Within a period of one year from purchase date, ClearSounds Communications
®
will
repair or replace (our discretion) your IL95, if a defect in materials or workmanship is
found. If we elect to replace your IL95, we may replace it with a new or reconditioned
product of the same or similar design. Repair or replacement will be warranted for a
period of 90 days or the remainder of the warranty period (from original purchase date),
whichever is longer.
The warranty does not cover accidents, negligence or breakage to any parts. This
includes shipping damage, failure to follow instructions, misuse, fire, floods, use of
incompatible accessories, Acts of God or failure in your phone service carrier’s line
service. The product must not be tampered with or taken apart by anyone who is not an
1 – ESPAÑOL
12 – ENGLISH
Shipping cost must be prepaid and the product must be packaged appropriately for shipping.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR WARRANTY AND MUST BE RETAINED AND
PRODUCED IN THE EVENT OF A WARRANTY CLAIM.
Service in United States
ClearSounds Communications
Attention: Repair Center
1743 Quincy Ave., Ste 143
Naperville, IL 60540
USA
800-965-9043
Check our website www.Clearsounds.Com for additional information and to down-
load additional manuals and information.
authorized ClearSounds Communications
®
representative. Tampering with the product
will void any written or implied warranties.
ClearSounds Communications
®
shall not be responsible for loss of time, inconvenience,
loss of use of your IL95, property damage by the IL95 or any consequential damages.
1 – ESPAÑOL
12 – ENGLISH
IL95
V0715
FRANCAIS ESPAÑOL ENGLISH
2 – ESPAÑOL
3 – ESPAÑOL
Instrucciones Importantes sobre Seguridad
Cuando utilice su maplificador portátil para teléfono, obedezca siempre las precauciones
básicas de seguridad para reducir el riesgo de incendio, descarga eléctricay lesiones
personales o materials. Entre las precauciones de seguridad podemos mencionar:
1 Lea y entienda todas las instrucciones de uso, advertencies y marcas en el producto.
2 No utilice este producto dentro de agua ni en sus proximidades, ni cuando usted este
mojado.
3 No abra este producto, usted puede exponerse a voltajes peligrosos o a otros riesgos. La
apertura del producto anula automáticamente la garantía.
2 – ESPAÑOL
3 – ESPAÑOL
1 Luz indicadora de encendido
2 Volumen
3 Tono
4 Entrada para cable de equipo base
5 Botón amplificador
6 Entrada para cabledel auricular
7 Entrada para el adaptador de CA
8 Interruptor de compatibilidad con 12
posiciones
4
2
6
1
3
5
7
8
INSTALACION
1 Desconecte el cable del auricular de la base del teléfono. Inserte este
cable en la entrada marcada como “HANDSET” auricular.
2 Conecte un lado del cable telefónico corto (incluido) en la entrada marcada
como “BASE” en la parte posterior del amplificador.
3 Fije el interruptor del compatibilidad al ajuste “ 4”. Este ajuste proporciona
compatibilidad en la mayoría de los teléfonos.
4 Conecte el adaptador de corriente de CA en el IL95 (localizado en el lado
superior izquerdo de la unidad) y conecte el otro extremo en un enchufe
eléctrico que funcione.
5 Descuelgue el auricuclar. Si escucha el tono de marcar, su amplificador
IL95 ha sido instalado correctamente.
6 Asegurese de registar su producto en la direccion de internet www.
clearsounds.com.
Si no escucha el tono de marcar o la persona a la que está llamando no puede escucha-
rlo, consulte la sección de compatibilidad del teléfono.
4 – ESPAÑOL
5 – ESPAÑOL
FUNCIONAMIENTO
Puede regular el nivel del volumen usando el control de volumen deslizante de la parte
superior de la unidad (control izquierdo). Si desliza el control hacia arriba aumentará el
volumen.
Puede regular el tono usando el control de tonos de la parte superior de la unidad control
derecho). Regúlelo hasta que encuentre una posición que produzca el sonido más nítido.
Si usted require de amplificación adicional en cualquier momento de su conversación,
simplemente la presione y sostenga el botón amplificador.
Cuando se oprime el botón amplificador, se silencia el micrófono del auricular.
Suelte el botón amplificador cuando desee hablar.
Compatibilidad con el teléfono
Debido a que no todos los auriculares están cableados de forma estándar, hemos provisto
un interruptor de compatibilidad de 12 posiciones para adaptar la compatibilida con el
interruptor:
1 Mantenga presionado el interruptor “on-hook” (colgado) de su teléfono o
coloque el auricular en la cuneta.
2 Regule el interruptor girándolo hasta que escuhe un “clic” para ir a la
siguiente posición.
4 – ESPAÑOL
5 – ESPAÑOL
3 Suelte el interruptor “on-hook” o levante el auricular y escuche si hay tono de
marcar.
4 Continúe este proceso hasta que escuche el tono de marcar y el micrófono
funcione. Una vez que haya encontrado el ajuste apropiado, tome nota del
mismo por si fuese a cambiar accidentalmente o para cuando usted utilice
el IL95 en otro teléfono.
NOTA: El IL95 no purde ser utilizado el teléfonos con teclado en el auricular.
Resolución de problemas
Si después de la instalación de su amplificador IL95, no tiene tono de marcar o la persona a
la que llamó no puede escucharlo, ebserve los pasos siguientes:
1 las conexiones estén correctas.
2 Asegúrese de que este conectado en el toma corriente.
3 Desconecte la unidad o utilice otro teléfono y verifique si su servicio
telefónico está funcionando apropiadamente.
4 Cambie el ajuste de compatibilidad usando el selector que se encuentra en
la base de la unidad.
6 – ESPAÑOL
7 – ESPAÑOL
LA FCC LE INFORMA:
Este equipo cumple con las disposiciones de la sección 68 del reglamento de la FCC y los
requisitos adoptados por la ACTA (Asociación Estadounidense de Telecomunicaciones
por Frecuencias Portadoras). La base de este equipo lleva adherida una etiqueta que
contiene, además de otra información, un identificador de producto en el formato
US:AAAEQ##TXXXX. De solicitarse, deberá comunicarse este número a la compañía
telefónica. Cada uno de los componentes terminales certificados del aparato ha
venido acompañado dentro del embalaje con el correspondiente código de pedido de
servicio uniforme (USOC por sus siglas en inglés) aplicable a terminales de conexión
estandarizadas (es decir, RJ11C).
El REN (número equivalente de timbrados) sirve para determinar el número de aparatos
que pueden conectarse a una línea telefónica de manera que todos puedan timbrar
cuando alguien llama a su número de teléfono. En la mayor parte de las áreas, aunque
no en todas, la suma de los REN de todos los dispositivos conectados a una línea no
debe exceder de cinco (5.0). Para cerciorarse sobre el número de aparatos que puede
conectar a su línea de acuerdo con el REN, comuníquese con la compañía telefónica de
su localidad para determinar el REN máximo para su área de llamadas.
6 – ESPAÑOL
7 – ESPAÑOL
Si su aparato telefónico provoca daños en la red telefónica, la compañía telefónica quizás
discontinúe el servicio que usted ha contratado. De ser posible, se lo notificarán con
anticipación. Sin embargo, si no pudieran comunicárselo con anticipación, le avisarán
lo antes posible. Se le informará sobre su derecho a presentar una queja ante la FCC.
La compañía telefónica puede modificar sus instalaciones, equipo, operaciones o
procedimientos en una forma que podría afectar el buen funcionamiento del producto
que usted ha adquirido. En caso de que lo haga, se lo notificarán con anticipación para
darle la oportunidad de evitar la interrupción del servicio telefónico. Si tiene problemas
con este aparato telefónico, desconéctese de la red hasta que se haya solucionado el
problema o hasta estar seguro de que el equipo no está funcionando mal.
Este aparato no puede usarse para el servicio con monedas que brinda la compañía
telefónica. La conexión al servicio de línea compartida está sujeta a las tarifas vigentes
en el estado. Este aparato es compatible con prótesis auditivas.
Advertencia: Los cambios o modificaciones realizadas a este aparato que no han sido
expresamente aprobados por la parte responsable del cumplimiento normativo podrían
invalidar la autorización del usuario para operar el aparato.
Nota: Este equipo ha sido probado y se encontró que cumple con los límites
8 – ESPAÑOL
9 – ESPAÑOL
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
ClearSounds IL95 Le manuel du propriétaire
- Taper
- Le manuel du propriétaire
- Ce manuel convient également à
dans d''autres langues
- English: ClearSounds IL95 Owner's manual
- español: ClearSounds IL95 El manual del propietario
Documents connexes
-
ClearSounds V508 Manuel utilisateur
-
-
-
-
-
ClearSounds CSCSC500 Manuel utilisateur
-
-
-