Eaton Powerware 9125 Guide d'installation

Powerware 9125 (9910-P30) UPS

Installation Guide for IBM Applications

Guide d’Installation Onduleur pour Applications IBM

USV Installationsanleitung für IBM-Anwendungen

Guida all’Installazione dell’UPS per le Applicazioni IBM

Guía de Instalación del SIE para Aplicaciones de IBM

®

IBM, pSeries, AIX, xSeries, AS/400, OS/400, and RS/6000 are registered trademarks and iSeries, OpenPower, and

i5/OS are trademarks of International Business Machines Corp.

Powerware, X-Slot, and LanSafe are registered trademarks and ConnectUPS is a trademark of Eaton Electrical Inc..

Burndy is a registered trademark of Framatone Connectors International.

IBM, pSeries, AIX, xSeries, AS/400, OS/400, et RS/6000 sont des marques déposées et iSeries, OpenPower, et

i5/OS sont des marques commerciales de International Business Machines Corp.

Powerware, X-Slot, et LanSafe sont des marques déposées et ConnectUPS est une marque commerciale de Eaton

Electrical Inc..

Burndy est une marque commerciale de Framatone Connectors International.

IBM, pSeries, AIX, xSeries, AS/400, OS/400, und RS/6000 sind eingetragene Warenzeichen und iSeries,

OpenPower, und i5/OS sind Warenzeichen der International Business Machines Corp.

Powerware, X-Slot, und LanSafe sind ein eingetragene Warenzeichen und ConnectUPS ist ein Warenzeichen der

Eaton Electrical Inc.

Burndy ist ein Warenzeichen der Framatone Connectors International.

IBM, pSeries, AIX, xSeries, AS/400, OS/400, e RS/6000 sono marchi di fabbrica depositato e iSeries, OpenPower, e

i5/OS sono marchi di fabbrica della International Business Machines Corp.

Powerware, X-Slot, e LanSafe sono marchi di fabbrica depositato e ConnectUPS è un marchio di fabbrica della Eaton

Electrical Inc.

Burndy è un marchio di fabbrica depositato di Framatone Connectors International.

IBM, pSeries, AIX, xSeries, AS/400, OS/400, y RS/6000 son marcas comerical registradas y iSeries, OpenPower, y

i5/OS son marcas comerical de International Business Machines Corp.

Powerware, X-Slot, y LanSafe son marcas comercial registradas y ConnectUPS es una marca c omerical de Eaton

Electrical Inc.

Burndy es una marca comerical de Framatone Connectors International.

reproduced in any way without the express written approval of Eaton Corporation.

peut être reproduite d’une quelconque manière sans l’accord écrit explicite de Eaton Corporation.

ohne ausdrückliche schriftliche Genehmigung von Eaton Corporation auf irgendeine Weise vervielfältigt werden.

documento può essere riprodotta in alcun modo senza l’esplicita autorizzazione scritta di Eaton Corporation.

reproducción total o parcial de este documento sin el expreso consentimiento por escrito de Eaton Corporation.

Special Symbols

The following are examples of symbols used on the UPS or accessories to alert you to important

information:

RISK OF ELECTRIC SHOCK - Indicates that a risk of electric shock is present and the

associated warning should be observed.

CAUTION: REFER TO OPERATOR’S MANUAL - Refer to your operator’s manual for

additional information, such as important operating and maintenance

instructions.

This symbol indicates that you should not discard the UPS or the UPS batteries

in the trash. This product contains sealed, lead-acid batteries and must be

disposed of properly. For more information, contact your local recycling/reuse or

hazardous waste center.

This symbol indicates that you should not discard waste electrical or electronic

equipment (WEEE) in the trash. For proper disposal, contact your local

recycling/reuse or hazardous waste center.

Symboles Spéciaux

Voici des exemples de symboles utilisés sur l’onduleur ou ses accessoires pour vous alerter

concernant des informations importantes :

RISQUE DE CHOC ELECTRIQUE - Indique la présence d’un risque de choc électrique

et l’avertissement associé devant être observé.

ATTENTION : SE REPORTER AU MANUEL DE L’OPERATEUR - Reportez-vous à votre

manuel de l’opérateur pour des informations supplémentaires telles que les

instructions importantes de fonctionnement et de maintenance.

Ce symbole indique que vous ne devez pas jeter l’onduleur ou les batteries de

l’onduleur à la poubelle. Ce produit contient des batteries au plomb étanches et

doit être mis au rebut en conséquence. Pour plus d’informations, contactez votre

centre local de recyclage ou de dépôt de déchets dangereux.

Ce symbole indique que vous ne devez pas jeter de déchets électriques ou

électroniques (WEEE) à la poubelle. Pour une mise au rebut adéquate, contactez

votre centre local de recyclage ou de dépôt de déchets dangereux.

Besondere Symbole

Im Folgenden werden die Symbole aufgeführt, die an USV-Geräten bzw. deren Zubehör

verwendet werden, und die Sie auf wichtige Informationen aufmerksam machen:

STROMSCHLAGGEFAHR - Gibt an, dass eine Stromschlaggefahr besteht und die

entsprechende Warnung beachtet werden muss.

VORSICHT! SIEHE BEDIENUNGSANLEITUNG - Weitere Angaben, wie etwa wichtige

Bedienungs- und Wartungsanweisungen, sind der Bedienungsanleitung zu

entnehmen.

Dieses Symbol bedeutet, dass die USV oder die Akkus der USV nicht in den Müll

gegeben werden dürfen. Dieses Produkt enthält versiegelte Bleibatterien, die

vorschriftsmäßig zu entsorgen sind. Nähere Informationen erhalten Sie bei Ihrem

örtlichen Recyclinghof/Sondermüllentsorger.

Dieses Symbol gibt an, dass Abfälle von Elektro- und Elektronikgeräten (engl.

Abk.: WEEE) nicht über den normalen Müll entsorgt werden dürfen. Nähere

Informationen erhalten Sie bei Ihrem örtlichen

Recyclinghof/Sondermüllentsorger.

Simboli Speciali

La sezione che segue riporta esempi dei simboli utilizzati sull’UPS o sugli accessori per mettere in

evidenza informazioni importanti:

RISCHIO DI SCOSSE ELETTRICHE - Indica il rischio di scosse elettriche e la necessità

di osservare le avvertenze descritte.

ATTENZIONE: CONSULTARE IL MANUALE DELL’UTENTE - Indica che è necessario

consultare il manuale dell’utente per ulteriori informazioni, ad esempio per

istruzioni importanti sull’uso e la manutenzione dell’unità.

Questo simbolo indica che non è possibile smaltire l’UPS o le batterie come

normali rifiuti. Il presente prodotto contiene batterie al piombo-acido sigillate e

deve essere smaltito correttamente. Per ulteriori informazioni contattare il locale

centro di riciclaggio/recupero e smaltimento rifiuti pericolosi.

Questo simbolo indica che non è possibile smaltire dispositivi elettrici o

elettronici (WEEE) come normali rifiuti. Per un corretto smaltimento contattare il

locale centro di riciclaggio/recupero e smaltimento rifiuti pericolosi.

Símbolos Especiales

Los siguientes son ejemplos de los símbolos que se utilizan en el SIE o en los accesorios para

alertarlo sobre información importante:

RIESGO DE DESCARGA ELÉCTRICA - Indica un riesgo de descarga eléctrica y debe

tomar las advertencias relacionadas.

PRECAUCIÓN: CONSULTE EL MANUAL DEL OPERADOR - Consulte el manual del

operador para obtener información adicional como importantes instrucciones

sobre funcionamiento y mantenimiento.

Este símbolo indica que no debe desechar el SIE o las baterías del SIE en la

basura. Este producto contiene baterías selladas de ácido de plomo y se deben

desechar de manera apropiada. Para obtener más información, comuníquese con

el centro local de reciclado o reutilización de desechos peligrosos.

Este símbolo indica que no debe desechar equipo electrónico o eléctrico (WEEE

por sus siglas en inglés) en la basura. Para la eliminación correcta, comuníquese

con el centro local de reciclado o reutilización de desechos peligrosos.

This page intentionally left blank.

EATON Powerware

®

9125 (9910-P30) UPS Installation Guide for IBM

®

Applications S 164201636 Rev A

i

Table of Contents

1 Installation 1.........................................................

Parts List 1..........................................................................

UPS Internal Battery Connection 4..........................................................

Setup and Installation 5.................................................................

Rack-Mount Setup 5....................................................................

Tower Setup 10........................................................................

EBM Installation 15.....................................................................

PDM Installation 17.....................................................................

UPS Installation 18.....................................................................

Remote Emergency Power-off Installation 18...................................................

Power Connections and Startup 20..........................................................

Typical Power Connections 24..............................................................

Load Segments 29......................................................................

2 Operation 31..........................................................

Turning the UPS On 31...................................................................

Starting the UPS on Battery 31.............................................................

Turning the UPS Off 32...................................................................

Initiating the Self-Test 32.................................................................

Operating Modes 33....................................................................

Normal Mode 34....................................................................

Battery Mode 35....................................................................

Bypass Mode 36.....................................................................

Standby Mode 36....................................................................

Configuration Mode 37...................................................................

3 Communication 41.....................................................

Single-Port Card 41.....................................................................

Communication Options 44................................................................

i5 Interface Overview 45..................................................................

iSeries or AS/400 Interface Overview 46......................................................

Serial (TTY) Interface Overview 47...........................................................

p5 or pSeries with Logical Partitions Interface Overview 48.........................................

4 Service and Support 49.................................................

TABLE OF CONTENTS

EATON Powerware

®

9125 (9910-P30) UPS Installation Guide for IBM

®

Applications S 164201636 Rev A

ii

Table des Matières

1 Installation 51.........................................................

Liste des Pièces 51.....................................................................

Connexion à la Batterie Interne de l’Onduleur 54................................................

Configuration et Installation 55.............................................................

Configuration en Baie 55.................................................................

Configuration en Tour 61.................................................................

Installation d’un EBM 66.................................................................

Installation d’un PDM 68.................................................................

Installation de l’Onduleur 70...............................................................

Installation de Arrêt d’Urgence à Distance 71...................................................

Connexions Électriques et Mise en Marche 73..................................................

Connexions Électriques Type 77............................................................

Segments de Charge 82..................................................................

2 Fonctionnement 83.....................................................

Mise Sous Tension de l’Onduleur 83.........................................................

Mise en Route de l’Onduleur à l’Aide de la Batterie 83............................................

Mise Hors Tension de l’Onduleur 84.........................................................

L’Exécution de l’Auto-Test 84..............................................................

Modes de Fonctionnement 85..............................................................

Mode Normal 86....................................................................

Mode Batterie 87....................................................................

Mode Dérivation 88..................................................................

Mode Attente 88....................................................................

Mode Configuration 88...................................................................

3 Communication 91.....................................................

Single-Port Card 91.....................................................................

Options de Communication 94..............................................................

Aperçu de l’Interface i5 95................................................................

Aperçu de l’Interface iSeries ou AS/400 96....................................................

Aperçu de l’Interface Série (TTY) 97..........................................................

Aperçu de l’Interface des Serveurs p5 ou pSeries avec Partitions Logiques 98............................

4 Entretien et Assistance 99...............................................

TABLE OF CONTENTS

EATON Powerware

®

9125 (9910-P30) UPS Installation Guide for IBM

®

Applications S 164201636 Rev A

iii

Inhaltsverzeichnis

1 Einbau 101............................................................

Teileliste 101..........................................................................

Interner USV-Batterieanschluss 104..........................................................

Montage und Installation 105...............................................................

Montage im Rack 105....................................................................

Montage im Tower 111...................................................................

Einbau des EBM 116.....................................................................

Einbau des PDM 118.....................................................................

USV-Installation 120.....................................................................

Fern-Notausschaltung-Installation 121........................................................

Stromanschlüsse und Hochfahren 123.........................................................

Typische Netzanschlüsse 127...............................................................

Lastsegmente 132.......................................................................

2 Betrieb 133............................................................

Einschalten der USV 133..................................................................

Inbetriebnahme der USV Mittels Akku 133......................................................

Ausschalten der USV 134..................................................................

Einleitung des Selbsttest 134...............................................................

Betriebsarten 135.......................................................................

Normalbetrieb 136....................................................................

Akkubetrieb 137......................................................................

Bypassbetrieb 138....................................................................

Bereitschaftsbetrieb 138................................................................

Konfigurationsbetrieb 139.................................................................

3 Kommunikation 143.....................................................

Single-Port Card 143.....................................................................

Kommunikationsoptionen 146...............................................................

i5 Schnittstellenüberblick 147...............................................................

Überblick über die Schnittstelle, iSeries oder AS/400 148...........................................

Übersicht über die Serielle (TTY) Schnittstelle 149................................................

p5 oder pSeries mit Überblick über die Schnittstelle mit den Logischen Partitionen 150......................

4 Service und Kundendienst 151.............................................

TABLE OF CONTENTS

EATON Powerware

®

9125 (9910-P30) UPS Installation Guide for IBM

®

Applications S 164201636 Rev A

iv

Sommario

1 Installazione 153.......................................................

Elenco Parti 153........................................................................

Collegamento Batteria Interna UPS 156........................................................

Approntamento e Installazione 157...........................................................

Approntamento Montaggio su Rack 157.......................................................

Approntamento Tower 163.................................................................

Installazione degli EBM 168................................................................

Installazione PDM 170....................................................................

Installazione UPS 172....................................................................

Installazione Porta REPO (Remote Emergency Power-Off) 173........................................

Collegamenti Elettrici e Avvio 175............................................................

Collegamenti Elettrici Tipici 179.............................................................

Segmenti di Carico 184...................................................................

2 Funzionamento 185......................................................

Accensione dell’UPS 185..................................................................

Avvio dell’UPS a Batteria 185...............................................................

Spegnimento dell’UPS 186.................................................................

Esecuzione del Test-Diagnostico 186..........................................................

Modalità Operative 187...................................................................

Modalità Normale 188.................................................................

Modalità Batteria 189..................................................................

Modalità Bypass 190..................................................................

Modalità Standby 190.................................................................

Modalità Configurazione 190...............................................................

3 Comunicazione 193.....................................................

Single-Port Card 193.....................................................................

Opzioni di Comunicazione 196...............................................................

Panoramica Interfaccia i5 197...............................................................

Panoramica Interfaccia iSeries o AS/400 198....................................................

Panoramica Interfaccia Seriale (TTY) 199.......................................................

Panoramica Interfaccia p5 o pSeries con Logical Partitions 200.......................................

4 Assistenza e Supporto 201................................................

TABLE OF CONTENTS

EATON Powerware

®

9125 (9910-P30) UPS Installation Guide for IBM

®

Applications S 164201636 Rev A

v

Contenido

1 Instalación 203.........................................................

Lista de Partes 203......................................................................

Conexión de la Batería Interna del SIE 206......................................................

Configuración e Instalación 207.............................................................

Configuración de Montaje en Estante 207......................................................

Configuración de la Torre 213...............................................................

EBM Instalación 218.....................................................................

PDM Instalación 220.....................................................................

Instalación SIE 221......................................................................

Instalación del Parada de Emergencia Remota 222................................................

Conexiones de Energía y Puesta en Marcha 224..................................................

Conexiones de Energía Comunes 228.........................................................

Segmentos de Carga 233..................................................................

2 Funcionamiento 235.....................................................

Encendido del SIE 235....................................................................

Arranque del SIE con Batería 235............................................................

Apagado del SIE 236.....................................................................

Inicio de la Auto-Prueba 236................................................................

Modos de Funcionamiento 237..............................................................

Modo Normal 238....................................................................

Modo Battery (Batería) 239..............................................................

Modo Bypass (En Desvío) 240............................................................

Modo Standby (En Espera) 240...........................................................

Modo Configuration (Configuración) 240.......................................................

3 Comunicación 245......................................................

Single-Port Card 245.....................................................................

Opciones de Comunicación 248..............................................................

Información General Sobre la Interfaz i5 249....................................................

Información General Sobre Interfaz Serie i o AS/400 250...........................................

Información General Interfaz (TTY) Serial 251....................................................

Información General p5 o Serie p con Particiones Lógicas 252........................................

4 Servicio y Soporte 253...................................................

TABLE OF CONTENTS

EATON Powerware

®

9125 (9910-P30) UPS Installation Guide for IBM

®

Applications S 164201636 Rev A

vi

This page intentionally left blank.

EATON Powerware

®

9125 (9910-P30) UPS Installation Guide for IBM

®

Applications S 164201636 Rev A

1

Chapter 1 Installation

IBM part numbers are subject to change without notice.

Parts List

Table 1. P30 Base Configuration

Part

Quantity IBM MN IBM FC IBM PN Eaton PN Description

1 P30 — 39J4816 103002728-3991 P30 UPS 3000 VA, 2100W

1 — — 42R4326 103004081-3991 P30 Accessory Kit

Table 2. P30 Application Matrix

Part Application (Quantity)

IBM

MN

IBM

FC

IBM

PN

Eaton PN Description

i5/

iSeriest

Tower

IEC

i5/

iSeries

Tower

NEMA

p5/

pSeries

®

Tower

IEC

p5/

pSeries

Tower

NEMA

p5/

pSeries

Rack

WW

i5/

iSeries

Rack

WW

— 9830 42R4323 103003945-3991 Power Cord Kit 1 — 1 — 1 1

— 39J4829 103002841-3991 Left Rail — — — — 1 1

—

6630

39J4830 103002842-3991 Right Rail — — — — 1 1

— 39J4831 103002843-3991 Rail Hardware — — — — 1 1

— — 42R4328 103004084-3991 P30 Rack

Mounting

Bracket Kit

— — — — 1 1

— 6570 42R4320 103003920-3991 NEMA

PowerPass

®

Distribution

Module (PDM)

— 1 — 1 — —

— 2936* 42R5144 103005626 Relay Interface

Card and Cable

(7.6m/25 ft) Kit

1 1 — — — 1

* Maximum: One FC 2934 or 2936 per P30 UPS.

NOTE IEC: IEC Countries (e.g., UK, Italy, etc.); NEMA: NEMA Countries (e.g. U.S. and Canada); WW: Worldwide

INSTALLATION

EATON Powerware

®

9125 (9910-P30) UPS Installation Guide for IBM

®

Applications S 164201636 Rev A

2

Table 3. P30 Options Matrix

Part Application (Quantity)

IBM

MN

IBM

FC

IBM

PN

Eaton

PN

Description

i5/

iSeries

Tower

IEC

i5/

iSeries

Tower

NEMA

p5/

pSeries

Tower

IEC

p5/

pSeries

Tower

NEMA

p5/

pSeries

Rack

WW

i5/

iSeries

Rack

WW

— 2934* 39J4824 116750221-001 ConnectUPSt-X

Web/SNMP Card

— — Min: 0, Max: 1 —

— 2938 42R4317 116750224-001 Environmental

Monitoring

Probe (EMP) and

CAT 5 Cable

(1.8m/6 ft) Kit

— — Min: 0, Max: 1

Co-requisite: FC 2934

—

— 6640 39J4819 103002837-3991 Extended Battery

Module (EBM)

Min: 0, Max: 4

— — 42R4327 103004082-3991 EBM Accessory

Kit

1 per FC 6640

* Maximum: One FC 2934 or 2936 per P30 UPS.

NOTE IEC: IEC Countries (e.g., UK, Italy, etc.); NEMA: NEMA Countries (e.g. U.S. and Canada); WW: Worldwide

Table 4. P30 Accessory Kit (42R4326)

Quantity Eaton PN Description

1 164201374 Powerware 9125 Two- in-One UPS (2500/3000 VA) User’s Guide

1 164201636 Powerware 9125 (9910-P30) Installation Guide for IBM Applications

1 164201428 UPS Safety Manual

1 103004870 Software Suite CD

1 124102044-001 Serial Cable (DB-9 to DB-9, 1.8m/6 ft)

4 05147635-3 Pedestals

4 180500137-003 Pedestal Mounting Screws (M4 x 10 mm)

Table 5. Power Cord Kit FC 9830 (42R4323)

Quantity Eaton PN Description

4 152601942-001 1.8m (6 ft) IEC 320-C13 to IEC 320-C14 Power Cord

1 152601971-001 4.4m (14 ft) IEC 320-C19 to IEC 320-C20 Power Cord

INSTALLATION

EATON Powerware

®

9125 (9910-P30) UPS Installation Guide for IBM

®

Applications S 164201636 Rev A

3

Table 6. EBM Accessory Kit (42R4327)

Quantity Eaton PN Description

1 164201375 Powerware 9125 Two- in-One EBM (2500/3000 VA) User’s Guide

1 164201636 Powerware 9125 (9910-P30) Installation Guide for IBM Applications

1 164201428 UPS Safety Manual

2 157605902-003 Joining Bracket

4 180500153-306 Joining Bracket Screws (M4 x 10 mm)

1 157606358-001 EBM Fixed Cover Plate

Table 7. FC 6570 PDM (42R4320)

Quantity Eaton PN Description

1 103003920-3991 FC 6570 PDM

1 164201392 Powerware 9125 PDM (2500/3000 VA) User’s Guide

1 164201428 UPS Safety Manual

1 103005260 Accessory Kit

S (1) 2.5m (8 ft) IEC 320-C19 to IEC 320-C20 Jumper Cable (152601948-001)

S (2) Joining Bracket (157605902-003)

S (4) Joining Bracket Screws (M4 x 10 mm) (180500153-306)

Table 8. Rack Mounting Bracket Kit (42R4328) for 2U Cabinets

Quantity Eaton PN Description

2 157606331-003 Rack Mounting Bracket (black)

4 180500167-203 Rack Mounting Bracket Screws (#6-32 x 3/8”)

Table 9. Left Rail Kit (39J4829)

Quantity Eaton PN Description

1 157605899-001 Left Fixed Mounting Rail Assembly

1 157605899-003 Rear Support Rail

1 157605900-001 Rear Hold-Down Bracket

3 180400027-400 #10 Split Lock Washer

3 180500165-001 #10-32 Wing Nut

3 180500230-001 #10 Flat Washer

INSTALLATION

EATON Powerware

®

9125 (9910-P30) UPS Installation Guide for IBM

®

Applications S 164201636 Rev A

4

Table 10. Right Rail Kit (39J4830)

Quantity Eaton PN Description

1 157605899-002 Right Fixed Mounting Rail Assembly

1 157605899-003 Rear Support Rail

1 157605900-001 Rear Hold-Down Bracket

3 180400027-400 #10 Split Lock Washer

3 180500165-001 #10-32 Wing Nut

3 180500230-001 #10 Flat Washer

UPS I nternal Battery Connection

NOTE Check the battery recharge date on the shipping carton label. If the date has expired

and the batteries were never recharged, do not use the UPS. Contact your service

representative.

To ensure proper battery operation before installing the UPS:

1. Verify that the UPS is off and unplugged.

2. Remove the UPS front cover (see Figure 1).

Figure 1. Removing Packing Material

3. Connect the internal battery connector (see Figure 2).

Figure 2. Connecting the Internal Battery Connector

INSTALLATION

EATON Powerware

®

9125 (9910-P30) UPS Installation Guide for IBM

®

Applications S 164201636 Rev A

5

4. Reinstall the UPS front cover (see Figure 3).

Figure 3. Reinstalling the Front Cover

Setup and Installation

The P30 UPS is designed for flexible configurations and can be installed

in a rack, as a standalone cabinet, or in a tower configuration.

NOTE For UPS rack installations: If the UPS is pre-installed in an IBM rack, continue

to “Power Connections and Startup” on page 20. If you are installing the UPS in an IBM

iSeries (0550 or 0551 types) or pSeries (7014 type) rack, continue to the following section,

“Rack- Mount Setup.” If you have another type of rack, contact your service representative

(see page 49).

NOTE

For UPS standalone cabinet or tower installations: Continue to “Tower

Setup” on page 10 to begin the UPS setup.

Rack-Mount Setup

The UPS can be installed in 19-inch racks and needs only 2U of valuable

rack space.

NOTE Mounting rails are required for each individual cabinet.

NOTE The UPS and any optional cabinets MUST be installed at the bottom of the rack. If

placed in a rack with existing equipment, the rack must be reconfigured to allow the UPS

installation at the bottom of the rack.

Each UPS and EBM requires one (1) of each item in the following list:

S Left rail

S Right rail

S Rail hardware kit

S Rack mounting bracket kit

INSTALLATION

EATON Powerware

®

9125 (9910-P30) UPS Installation Guide for IBM

®

Applications S 164201636 Rev A

6

The following steps explain how to install the UPS rail kit.

NOTE All hardware (screws, clip nuts, etc.) referenced in Steps 2 through 4 are contained

in the rail hardware kit.

1. Loosen the assembly wing nuts on both rail assemblies and adjust

the rail size for the depth of your rack (see Figure 4).

Assembly Wing Nuts

Front

Rear

Rear Hold-Down Bracket

Figure 4. Adjusting the Rail Depth

2. Select the proper holes in the rail for positioning the UPS and any

optional cabinets in the rack.

3. Secure both rails to the front of the rack with pan-head screws.

Insert the screws through the center holes of the rail (see Figure 5).

NOTE Do not tighten the screws until the UPS or EBM is installed.

Figure 5. Securing the Front Rail

La page charge ...

Eaton Powerware 9125 Guide d'installation

Ce manuel convient également à

Eaton Powerware 9125 Guide d'installation

dans d''autres langues

Documents connexes

Autres documents