Panasonic CQDVD700U Mode d'emploi
- Catégorie
- Systèmes vidéo de voiture
- Taper
- Mode d'emploi
Ce manuel convient également à
Mobile DVD Player with Built-in MPEG2 Video Decoder
Lecteur DVD mobile avec décodeur Vidéo MPEG2 intégré
Reproductor de DVD portátil con decodificador de vídeo
MPEG2 incorporado
CX-DV700U
Operating Instructions
Manuel d’instructions
Manual de instrucciones
RETURN TITLE
SUBTITLE
AUDIO ANGLE
REPEAT
TRACK
CAR DVD PLAYER/RECEIVER
TITLE / CHAPTER
PWR
RET
OSD GRP
123
456
789
0
MENU
STOP
TRACK / SEARCH
PAUSE PLAY
E
N
T
E
R
T E X T
INDICATOR
CX-DV700
■
DVD-VIDEO/VIDEO CD/CD PLAYBACK
■
DIGITAL OUTPUT
■
96 kHz 24 bit D/A CONVERTER
MOBILE DVD VIDEO PLAYER
≥Please read these instructions carefully before using this product and save this manual for future use.
≥Prière de lire ces instructions attentivement avant d’utiliser Ie produit et garder ce manuel pour l’utilisation ultérieure.
≥Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro.
T E X T
F
R
A
N
Ç
A
I
S
E
S
P
A
Ñ
O
L
CX-DV700U
3
E
N
G
L
I
S
H
CX-DV700U
2
Safety Information
CAUTION:
THIS PRODUCT IS A CLASS I LASER PRODUCT.
HOWEVER THIS PRODUCT USES A VISIBLE/
INVISIBLE LASER BEAM WHICH COULD CAUSE
HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THIS PRODUCT CORRECTLY
AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE
ONLY THE INCLUDED COMPONENTS.
Apparatus Claims of U.S. Patent Nos. 4,631,603,
4,577,216, and 4,819,098, licensed for limited
viewing uses only.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
WARNING:
NOT FOR USE WHERE VIDEO MONITOR IS VISIBLE
TO DRIVER TO AVOID RISK OF SERIOUS INJURY
OR POSSIBLE VIOLATION OF STATE LAWS.
ATTENTION :
CET APPAREIL EST UN PRODUIT LASER DE LA
CLASSE I. IL UTILISE, TOUTEFOIS, UN RAYON
LASER VISIBLE/INVISIBLE POUVANT EXPOSER À
UN RAYONNEMENT DANGEREUX S’IL EST DIRIGÉ.
UTILISEZ CET APPAREIL CORRECTEMENT EN
SUIVANT LES INSTRUCTIONS.
L’UTILISATION DE COMMANDES OU RÉGLAGES OU
L’EXÉCUTION D’OPÉRATIONS AUTRES QUE CELLES
QUI SONT INDIQUÉES DANS CE DOCUMENT
PEUVENT RÉSULTER EN UNE EXPOSITION À UN
RAYONNEMENT DANGEREUX.
N’OUVREZ PAS LES COUVERCLES ET N’ESSAYEZ
PAS D’EFFECTUER VOUS-MÊME DES
RÉPARATIONS. ADRESSEZ-VOUS À UN PERSONNEL
QUALIFIÉ POUR TOUTE RÉPARATION.
MISE EN GARDE:
POUR RÉDUIRE LES RISQUES D’INCENDIE OU
D’ÉLECTROCUTION, N’EXPOSEZ PAS CET APPAREIL
À LA PLUIE OU À L’HUMIDITÉ.
AFIN DE PRÉVENIR TOUT RISQUE D’INCENDIE OU
D’INTERFÉRENCES, UTILISER UNIQUEMENT LES
COMPOSANTS FOURNIS.
MISE EN GARDE:
(Pour Le Canada uniquement)
AFIN DE PRÉVENIR TOUT RISQUE D’INCENDIE OU
DE CHOCS ÉLECTRIQUES, NE PAS BRANCHER LA
FICHE (POLARISÉE) DU CORDON D’ALIMENTATION
DE L’APPAREIL DANS UN CORDON
PROLONGATEUR, UNE PRISE DE COURANT OU
TOUTE AUTRE PRISE À MOINS QUE LES LAMES NE
PUISSENT ÊTRE INSÉRÉES À FOND.
Si l’appareil doit être transporté
L’emballer soigneusement et l’envoyer port payé,
suffisamment assuré et de préférence dans son carton
d’emballage d’origine. Joindre une lettre timbrée sur
l’extérieur du carton, décrivant l’ennui en détail. Ne pas
envoyer l’appareil au siège social ou au Bureau de
vente régional. lls ne sont pas équipés pour les
réparations.
AVERTISSEMENT:
Pour éviter tout risque de blessures graves ou
d’infraction aux lois, le moniteur ne doit pas être
utilisé à un endroit où il soit visible par le
conducteur.
PRECAUCIÓN:
ÉSTE ES UN PRODUCTO LÁSER DE LA CLASE I. SIN
EMBARGO, ESTE PRODUCTO UTILIZA UN RAYO
LÁSER VISIBLE/INVISIBLE QUE PODRÍA CAUSAR
UNA EXPOSICIÓN PELIGROSA A LA RADIACIÓN.
ASEGÚRESE DE UTILIZAR CORRECTAMENTE ESTE
PRODUCTO, COMO SE INDICA EN LAS
INSTRUCCIONES.
LA UTILIZACIÓN DE CONTROLES, EL HACER
AJUSTES O EL SEGUIR PROCEDIMIENTOS
DISTINTOS DE LOS ESPECIFICADOS EN ESTE
MANUAL PODRÍA CAUSAR UNA EXPOSICIÓN
PELIGROSA A LA RADIACIÓN.
NO ABRA LAS CUBIERTAS NI HAGA REPARACIONES
USTED MISMO. SOLICITE LOS TRABAJOS DE
SERVICIO AL PERSONAL CALIFICADO.
ADVERTENCIA:
PARA REDUCIR EL RIESGO DE INCENDIOS O
SACUDIDAS ELÉCTRICAS, NO EXPONGA ESTE
PRODUCTO A LA LLUVIA NI A LA HUMEDAD.
PARA REDUCIR EL RIESGO DE INCENDIOS O
SACUDIDAS ELÉCTRICAS, Y PARA EVITAR LAS
INTERFERENCIAS MOLESTAS, UTILICE
SOLAMENTE LOS COMPONENTES INCLUIDOS.
Reclamaciones de aparatos de patentes de los
Estados Unidos de América número 4,631,603,
4,577,216 y 4,819,098, con licencia para usos de
visión limitada solamente.
Este producto incorpora tecnología de protección de
los derechos de autor que está protegida por
reclamaciones de métodos de ciertas patentes de los
Estados Unidos de América y otros derechos de
propiedad intelectual propiedad de Macrovision
Corporation y otros propietarios de derechos. La
utilización de esta tecnología de protección de los
derechos de autor debe contar con la autorización de
Macrovision Corporation, y sólo deberá utilizarse en
el hogar y con otros usos de visión limitada a menos
que Macrovision Corporation autorice lo contrario. La
inversión de la ingeniería o el desmontaje están
prohibidos.
ADVERTENCIA:
ESTE APARATO NO DEBE UTILIZARSE DONDE EL
CONDUCTOR PUEDA VER EL MONITOR DE VÍDEO,
PARA EVITAR ACCIDENTES GRAVES O POSIBLES
VIOLACIONES DE LAS LEYES ESTATALES.
D
I
G
I
T
A
L
C
X
-
D
V
7
0
0
M
O
B
I
L
E
D
V
D
V
I
D
E
O
P
L
A
Y
E
R
INDICATOR
■
D
VD
-V
ID
EO
/VI
DEO
CD
/C
D
PLA
YBA
CK
■
D
IGITAL O
UT
PU
T
■
96 kH
z 2
4
bit D
/A
CO
NVE
RTE
R
T
E
XT
M
O
B
L
E
D
V
D
P
L
A
Y
E
R
CX-DV700
CX-DV700U
Model No.
N˚ De Modèle
Serial No.
N˚ De Série
Manufactured by Matsushita
Communication Industrial Co., Ltd.
Yokohama Japan Made in Japan
5A12V
Label indication and location
Información para su seguridad
Consignes de sécurité
Laser products:
Wave length: 650 nm
Laser power: No hazardous radiation is emitted
with safety protection.
Produits laser:
Longueur d’onde: 650 nm
Puissance du laser: Aucune radiation dangereuse
n’est émise avec la protection de
sécurité.
Productos láser:
Longitud de onda: 650 nm
Potencia láser: Con protección de seguridad no
se emite radiación peligrosa.
CX-DV700U
5
E
N
G
L
I
S
H
CX-DV700U
4
Panasonic welcomes you to our ever growing family of electronic product owners. We know that this product
will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanical
engineering, and our products are manufactured with carefully selected components and assembled by people
who take pride in their work. Once you discover the quality, reliability, and value we have built into this product,
you too will be proud to be a member of our family.
❐ Features
≥ A single LSI chip now integrates all major DVD playback circuit functions including MPEG2 decoder, video
D/A converter, and audio decorders. This maximizes DVD’s potential for picture and sound quality, while
raising reliability and contributing to 1-DIN form-factor DVD player downsizing.
≥ Developed specifically for in-vehicle use, the compact optical pickup also excels in vibration resistance. It can
read 2-layer DVDs holding up to 4-hour programs, as well as your music CDs.
≥ Digital audio output terminal for upgrading to Dolby Digital surround. (Requires separately sold optical
cable).
≥ L/R stereo analog audio outputs (RCA) for connection to existing head unit aux inputs. Video output is
composite video (RCA).
≥ Supplied remote handles multi-function software (multi-language audio-track/subtitle, multi-angle, multi-
story, etc.), plus all basic functions.
Find the model number and serial number on either the back or bottom of the unit. Please record them in the
spaces below and retain this booklet as a permanent record of your purchase to help with identification in
case of theft.
MODEL NUMBER CX-DV700U SERIAL NUMBER
DATE PURCHASED FROM
When Driving
The driver must not operate the color LCD monitor.
Operating the color LCD monitor may lead to
distraction and cause an accident. Stop your car in a
safe location when operating the unit.
When Car Washing
Do not expose the product to water or excessive
moisture. This could cause electrical shorts, fire or
other damage.
When Parked
Parking in direct sunlight can produce very high
temperatures inside your car. Give the interior a
chance to cool down before switching the unit on.
Use the Proper Power Supply
This product is designed to operate with a 12 V,
negative ground battery system (the regular system
in a North American car).
Protect the Disc Mechanism
Avoid inserting any foreign objects into the slot of
the player.
Failure to observe this may cause malfunction due
to the precise mechanism of this unit.
Protect the DVD Software
When you leave the car, be sure to eject the disc
from this unit and bring it out.
Use Authorized Servicenters
Do not attempt to disassemble or adjust this
precision product. Please refer to the Servicenter list
included with this product for service assistance.
For Installation
The unit should be installed in a horizontal position
with the front end up at a convenient angle, but not
more than 30x. The user should bear in mind that in
some areas there may be restrictions on how and
where this unit must be installed. Consult your
dealer for further details.
❐ Use This Product Safely
❐ Components
≥ Operating Instruction. . . . . . . . . . . . . . . . . . . . 1
≥ Supplied Hardware. . . . . . 1 set (➡ pages 26, 31)
≥ Power Connector. . . . . . . . . . . . . . . . . . . . . . . 1
≥ Remote Control Unit . . . . . . . . . . . . . . . . . . . . 1
≥ Battery (CR2025). . . . . . . . . . . . . . . . . . . . . . . 1
≥ Warranty Card . . . . . . . . . . . . . . . . . . . . . . . . . 1
Contents
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Radio Frequency Interference Statement (Part 15 of the FCC rules) . 2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Use This Product Safely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
❏Discs that can be Played Back . . . . . . . . . . . . . . . . . . . . . . . . . 10
❏Remote Control Unit Preparation . . . . . . . . . . . . . . . . . . . . . . . 11
❏Common Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Inserting/Ejecting the Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Power, Playback, Stopping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
❏Basic Disc Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Selecting a Menu Item . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Fast Forward/Fast Backward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Go to Beginning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Slow Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Starting Playback from a Specific Track/Title/Chapter . . . . . . . . . . . . . . . . . . . . . . . . 17
On-Screen Displays (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
DVD Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Switching the Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Switching the Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Switching the Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Switching between Stereo and Monaural . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
❏Changing the Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 22
❏Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
❏Wiring Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
❏Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
❏Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
❏Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
❏Definition of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
❏Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
E
N
G
L
I
S
H
❐ Éléments constitutifs
CX-DV700U
7
CX-DV700U
6
F
R
A
N
Ç
A
I
S
Panasonic est heureuse de vous compter parmi les utilisateurs de ses appareils électroniques. Nous pouvons
vous assurer que cet appareil vous procurera de longues heures d’agrément. Notre réputation est fondée sur
une ingénierie électronique et mécanique de haute précision, laquelle préside à la fabrication d’appareils ne
comportant que des composants de choix assemblés par un personnel soucieux de la bonne réputation
acquise par la qualité de son travail. Après avoir découvert la qualité, la valeur et la fiabilité de cet appareil, vous
aussi serez fier d’être un client Panasonic.
❐ Caractéristiques
≥ Aujourd'hui, toutes les fonctions principales des circuits de lecture des DVD tiennent sur une seule puce LSI,
y compris le décodeur MPEG2, le convertisseur N/A vidéo, et les décodeurs audio. Ceci multiple les
possibilitiés d'image et de son du DVD, tout en accroissant la fiabilité et en contribuant à réduire
l'encombrement des lecteurs DVD au format 1 DIN.
≥ La tête de lecture optique compacte, conçue spécialement pour l'utilisation en voiture, offre une excellente
résistance aux vibrations. Elle est capable de lire des DVD à 2 couches renfermant jusqu'à 4 heures de
lecture, ainsi que des disques compacts.
≥ Prise de sortie audio numérique permettant la mise à niveau aux systèmes ambiophoniques Dolby Digital.
(Nécessite un câble optique vendu séparément.)
≥ Sorties analogiques stéréo G/D (RCA) pour le raccordement aux prises AUX des autoradio actuels. La sortie
vidéo est composite (RCA).
≥ La télécommande fournie est capable de piloter les logiciels multi-fonctions (piste son multi-langues/sous-
titres, multi-angles, multi-histoires, etc.) en plus de toutes les fonctions de base.
Il est recommandé de noter, dans l’espace prévu ci-dessous, les numéros de modèle et de série inscrits soit à l’arrière
soit sur le fond de l’appareil, et de conserver ce manuel comme mémorandum de l’achat afin de permettre l’identification
de l’appareil en cas de vol.
NUMÉRO DE MODÈLE CX-DV700U NUMÉRO DE SÉRIE
DATE DE L’ACHAT VENDEUR
❐ Précautions à prendre
≥ Manuel d’instructions . . . . . . . . . . . . . . . . . . . . . . . 1
≥ Matériel d’installation . . . 1 ensemble (➡pages 58, 63)
≥ Connecteur d’alimentation. . . . . . . . . . . . . . . . . . . . 1
≥ Télécommande . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
≥ Pile (CR2025) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
≥ Carte de garantie . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Table des matières
Consignes de sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Caractéristiques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Précautions à prendre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Éléments constitutifs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
❏Disques pouvant être lus . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
❏Préparation de la télécommande . . . . . . . . . . . . . . . . . . . . . . . 43
❏Opérations communes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Introduction/Retrait du disque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Alimentation, Lecture, Arrêt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
❏Fonctions de base pour les disques . . . . . . . . . . . . . . . . . . . . . 46
Sélection d’une rubrique du menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Avance accélérée/Recul accéléré . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Retour au début . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Lecture ralentie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Répétition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Début de la lecture depuis un(e) plage/titre/chapitre spécifique . . . . . . . . . . . . . . . . 49
Affichages à l’écran (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Menu DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Menu de titres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Changement de la langue des sous-titres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Changement de la langue audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Changement de l’angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Passage entre les modes stéréo et mono . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
❏Changement des réglages initiaux . . . . . . . . . . . . . . . . . . . . . . 54
❏Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
❏Connexions électriques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
❏En cas de difficulté . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
❏Entretien . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
❏Liste des codes de langue . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
❏Définition des termes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
❏Données techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
F
R
A
N
Ç
A
I
S
Au volant
Le conducteur ne doit jamais faire fonctionner ce
moniteur lorsqu'il conduit son véhicule. Le fait d'utiliser le
moniteur lorsqu'on est au volant réduit considérablement
la vigilance du conducteur et multiplie les risques
d'accident. Arrêter le véhicle dans un endroit sur pour
manipuler le moniteur.
Lavage de la voiture
Afin de prévenir tout risque de court-circuit ou d'incendie
n'exposez pas l'equipement, à l'eau ou à une humidité
excessive.
Voiture stationnée
L’habitacle d’une voiture immobile exposée au soleil
toutes vitres fermées devient rapidement très chaud.
Laissez rafraîchir l’intérieur du véhicule avant d’utiliser
l’appareil.
Source d’alimentation
Cet appareil est conçu pour fonctionner sur un système
d’alimentation avec batterie de 12 V à masse négative
(système standard sur les voitures de construction nord-
américaine).
Mécanisme du lecteur disque
N'insérez pas d’objet dans le logement du disque.
Autrement, le mécanisme ultra-précis du lecteur pourrait
être irrémédiablement endommagé.
Protection des disques DVD
Lorsque vous quittez le véhicule, éjectez le disque de
l’appareil et retirez-le.
Faites appel aux centres de service agréés
N'essayez pas de démonter ou d'ajuster cet appareil de
précision. Veuillez consulter la liste des centres de service
fournie avec cet appareil pour obtenir de l'aide.
Installation
L’apppareil doit être installé en position horizontale avec
son extrémité avant inclinée vers le haut à un angle
commode et jamais supérieur à 30x.
L’utilisateur doit garder à l’esprit que, dans certaines
régions, il peut y avoir des restrictions relatives à la façon
d’installer cet appareil et à l’endroit où il doit être installé.
Contactez votre détaillant pour plus de détails.
Índice
E
S
P
A
Ñ
O
L
CX-DV700U
9
CX-DV700U
8
E
S
P
A
Ñ
O
L
Panasonic le da la bienvenida a la familia constantemente en aumento de poseedores de productos electrónicos. Estamos
seguros de que este producto le proporcionará muchas horas de distracción. Nos esforzamos en proporcionarle las
ventajas de la ingeniería mecánica y electrónica de precisión, de una fabricación con componentes cuidadosamente
seleccionados, y de un montaje realizado por personas orgullosas de la reputación que su trabajo ha cimentado para
nuestra empresa. Una vez comprobada la calidad, el valor y la fiabilidad incorporados en este producto, usted también se
sentirá orgulloso de pertenecer a nuestra familia.
❐ Características
≥ Un solo chip LSI integra ahora todas las funciones principales del circuito de reproducción DVD,
incluyendo decodificador MPEG2, convertidor D/A de vídeo y decodificadores de audio. Esto maximiza el
potencial del DVD para la calidad de la imagen y del sonido, mientras que aumenta la fiabilidad y
contribuye a disminuir el tamaño del reproductor DVD según el factor de forma 1 DIN.
≥ Desarrollado específicamente para ser utilizado en vehículos, el lector óptico compacto sobresale también
por su resistencia a la vibración. Puede leer DVDs de 2 capas con programas de hasta 4 horas, así como
también sus CDs de música.
≥ Terminal de salida de audio digital para mejorar a sonido ambiental Dolby Digital. (Requiere un cable óptico
vendido separadamente.)
≥ Salidas de audio analógico estéreo L/R (RCA) para conectar a las entradas auxiliares de las unidades
principales existentes. La salida de vídeo es del tipo de vídeo compuesto (RCA).
≥ Control remoto suministrado que controla software de múltiples funciones (pista de audio/subtítulos de
múltiples idiomas, múltiples ángulos, múltiples historias, etc.), más todas las funciones básicas.
Cuando conduzca
El conductor no deberá utilizar el monitor LCD en color.
La utilización del monitor LCD en color puede producir
distracciones y ser la causa de un accidente. Pare su
vehículo en un lugar seguro cuando utilice el aparato.
Cuando lave el automóvil
No exponga el equipo, al agua o a una humedad excesiva.
Esto puede causar cortocircuitos eléctricos, incendios u
otros daños.
Cuando estacione
El estacionamiento a la luz solar directa puede producir
temperaturas muy altas en el interior de su vehículo.
Procure enfriar el interior antes de encender la unidad.
Uso de la alimentación apropiada
Este equipo ha sido diseñado para funcionar con un
sistema de batería de 12 V con negativo a masa. (el
sistema normal en un vehículo norteamericano)
Protección del mecanismo de los discos
Evite insertar objetos extraños en la ranura del disco.
En caso contrario, podrán producirse fallos en el
funcionamiento porque el mecanismo de esta unidad es
muy preciso.
Protección de los programas de DVD
Cuando salga de su automóvil, asegúrese de expulsar el
disco del aparato y retirarlo.
Uso de los centros de servicio autorizados
No intente desmontar ni ajustar este equipo de precisión.
Consulte la lista de centros de servicio incluida en este
producto para acudir a ellos cuando sea necesario.
Instalación
La unidad deberá instalarse en posición horizontal, con el
extremo delantero hacia arriba formando un ángulo
conveniente, pero no superior a 30x.
El usuario deberá tener cuenta que en algunas zonas
podrá haber restricciones acerca de cómo y dónde deberá
instalarse este aparato. Consulte a su distribuidor para
conocer más detalles.
Encuentre el número de modelo y el número de serie en la parte posterior o inferior de la unidad. Anótelos en el espacio
de abajo y guarde este manual a modo de prueba permanente de su compra, para que pueda identificar la unidad en el
caso de que se la roben.
NÚMERO DE MODELO CX-DV700U NÚMERO DE SERIE
FECHA DE ADQUISICIÓN VENDEDOR
❐ Uso de este equipo con seguridad
❐ Componentes
≥ Manual de Instrucciones . . . . . . . . . . . . . . . . . . . . . 1
≥ Hardware Suministrado . . . 1 juego (➡páginas 90, 95)
≥ Conector de alimentación . . . . . . . . . . . . . . . . . . . . 1
≥ Unidad de control remoto . . . . . . . . . . . . . . . . . . . . 1
≥ Pila (CR2025) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
≥ Tarjeta de garantía. . . . . . . . . . . . . . . . . . . . . . . . . . 1
Información para su seguridad . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Características . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Uso de este equipo con seguridad . . . . . . . . . . . . . . . . . . . . . . . . 8
Componentes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
❏Discos que pueden reproducirse . . . . . . . . . . . . . . . . . . . . . . . 74
❏Preparación del control remoto . . . . . . . . . . . . . . . . . . . . . . . . 75
❏Operaciones comunes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Inserción/Extracción de discos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Alimentación, Reproducción, Parada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
❏Operaciones basícas con discos . . . . . . . . . . . . . . . . . . . . . . . 78
Selección de un elemento de menú . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Avance rápido/Retroceso rápido . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Al comienzo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Pausa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Reproducción a cámara lenta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Repetición . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Inicio de reproducción desde un pista/título/capítulo específico . . . . . . . . . . . . . . . . 81
Visualizaciones en pantalla (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Menú de DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Menú de títulos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Cambio de idioma de subtítulos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Cambio del idioma de audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Cambio del ángulo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Cambio entre estéreo y mono . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
❏Cambio de los ajustes iniciales . . . . . . . . . . . . . . . . . . . . . . . . 86
❏Instalación . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
❏Conexiones del cableado . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
❏Solución de problemas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
❏Mantenimiento . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
❏Lista de códigos de idiomas . . . . . . . . . . . . . . . . . . . . . . . . . .102
❏Definición de términos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
❏Especificaciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
Region numberVideo formatDisc sizeMark (logo)Disc
DVD video
E
N
G
L
I
S
H
2
CX-DV700U
11
E
N
G
L
I
S
H
1
CX-DV700U
10
Discs that can be Played Back Remote Control Unit Preparation
Region Management Information
Region Management Information: This product is designed and manufactured to
respond to the Region Management Information that is recorded on a DVD disc. If
the Region number described on the DVD disc does not correspond to the Region
number of this product, this product cannot play this disc.
The Region number for this product is “1” and “ALL”.
5z (12 cm)
3z (8 cm)
NTSC
NTSC
1
All
Battery Installation (Inserting/Replacing the Batteries)
1.Remove the battery holder.
Pull the holder by the position B while
pushing position A in the direction indicated
by the arrow.
2.Install the battery on the battery holder.
Set a new battery properly with its (i) side
facing up as shown in the figure.
3.Insert the battery holder.
Push in the battery holder back into its
original position.
Battery Notes
Remove and dispose of an old battery immediately.
Battery Information:
≥Battery type: Panasonic lithium battery (CR 2025) (supplied)
≥Battery life: Approximately 6 months with normal use (at room temperature)
≥Do not disassemble or short the battery. Do not throw a battery into a fire.
≥Keep batteries away from children to avoid the risk of accidents.
≥Be careful to the local disposal rules when you dispose of batteries.
Video CD
T E X T
CD, CD TEXT
Lithium battery
(supplied)
Back side
Position A
Position B
Battery holder
Meaning of Symbols
Indicates the compatible types of disc.
CD
❐ The following discs cannot be played back on this product.
≥ DVD-Audio
≥ DVD-ROM ≥ DVD-R ≥ DVD-RAM ≥ DVD+RW ≥ dts DVDs
≥ SVCD ≥ VSD ≥ CVD ≥ CD-G ≥CD-ROM
≥ CD-RW ≥ SACD ≥ photo CD ≥ CD-R ≥ dts CDs ≥ CDV
≥ Divx Video Discs ≥ CD-EXTRA (audio-only playback possible)
≥ Discs recorded in PAL format, others
≥ DVDs with a region number other than “1” or “ALL”
The data on photo CDs and CD-R can be damaged if you attempt to play them.
Even if you play back a dts CD, normal sound cannot be output.
Caution:
≥Improper use of batteries may cause overheating, an explosion or ignition, resulting in injury or a fire.
Battery leakage may damage the unit.
❐ When “/” is displayed
Input is not possible because a soundtrack, subtitle language or angle number which was not recorded
on the disc has been selected or because the user has attempted to perform an operation which is not
supported by the unit.
Pages marked “Basic” describe the basic functions and operations for each
item.
E
N
G
L
I
S
H
4
CX-DV700U
13
E
N
G
L
I
S
H
3
CX-DV700U
12
Common Operation
Slide the cover.
Insert the disc.
≥ Before loading a disc, check to make sure that a
disc is not already loaded.
≥ The power turns to ON and playback begins
automatically.
≥ The slot illumination turns off.
≥ The front panel indicator blinks while the disc is
loading. (See below)
Close the cover.
≥ Always close the cover completely when using
the player.
Ejecting the Disc
≥ The front panel indicator blinks.
≥ You can eject the disc even when the power is off.
≥ You can eject a disc even when ACC is off by
pressing the eject button for half a second or more.
Front panel indicator
R
E
T
U
R
N
T
IT
L
E
S
U
B
T
IT
L
E
AUDIO
ANGLE
R
E
P
E
A
T
T
R
A
C
K
C
A
R
D
V
D
P
LA
Y
E
R
/R
E
C
E
IV
E
R
T
IT
L
E
/ C
H
A
P
T
E
R
S
T
O
P
T
R
A
C
K
/ S
E
A
R
C
H
P
A
U
S
EP
L
A
Y
RET
OSD
GRP
123
4
56
7
8
9
0
MENU
E
N
T
E
R
PWR
Perform these operations with the remote control. Before performing any operation,
check the TV connection setting (➡ page 31) and turn your car’s ignition switch to
“ACC” or “ON”. Operations vary according to the disc. For details, refer to the guide
provided with the disc.
Power [PWR]
PWR
Press
PWR
Press
To turn the power off:
≥ Turn the power on.
≥ The front panel indicator lights.
Playback [PLAY 1]
PLAY
Press
≥ Playback starts.
≥ When the menu screen appears, refer to
“Selecting a Menu Item.” (➡ Next page)
Stopping [STOP π]
Press
≥ When play is stopped, the player records the
point where [STOP π] was pressed.
(Continued playback function)
Press [PLAY 1] again, and play will resume
from this point. (During Stop, hold [STOP π]
(2 seconds) to cancel continued playback.
(During playback)
Note:
≥ Loading a disc also turns the power on.
≥ The front panel indicator turns off.
STOP
IND
IC
ATO
R
■
D
V
D
-
V
ID
E
O
/
V
ID
E
O
C
D
/C
D
P
L
A
Y
B
A
C
K
■
D
IG
IT
A
L
O
U
T
P
U
T
■
9
6
k
H
z
2
4
b
it
D
/A
C
O
N
V
E
R
T
E
R
T
E
X
T
D
I
G
I
T
A
L
CX-DV700
M
O
B
I
L
E
D
V
D
V
I
D
E
O
P
L
A
Y
E
R
Label side
Slot illumination
ACC
ON
C
O
L
O
R
L
C
D
M
O
N
I
T
O
R
S
T
A
N
D
B
Y
(
R
)
/O
N
(
G
)
C
Y
-V
M
5
80
0
U
P
O
W
E
R
A
S
P
E
C
T
P
ICTURE
B
R
I
G
H
T
M
E
N
U
EN
TE
R
#
"
Note:
≥When using the remote control, face the remote control toward the remote control signal receiver.
(➡ page 12)
1
2
3
1
3
2
IN
DICATO
R
■
D
V
D
-
V
I
D
E
O
/V
ID
E
O
C
D
/C
D
P
L
A
Y
B
A
C
K
■
D
IG
IT
A
L
O
U
T
P
U
T
■
9
6
k
H
z
2
4
b
it D
/A
C
O
N
V
E
R
T
E
R
T
E
X
T
D
I
G
I
T
A
L
CX-DV700
M
O
B
I
L
E
D
V
D
V
I
D
E
O
P
L
A
Y
E
R
<
Press
Turn the car’s ignition
switch ACC or ON.
(ACC indicator lights.)
Turn the monitor
switch to ON.
Preparation
Remote control signal
receiver (➡ page 31)
ACC indicator
Inserting the Disc
Indicates pressing
a button.
E
N
G
L
I
S
H
6
CX-DV700U
15
E
N
G
L
I
S
H
5
CX-DV700U
14
Basic Disc Operations
Some DVD discs have unique menu structures called DVD menu. Although the DVD menu’s
contents and operation differ from disc to disc, the following explains basic operation when this
feature is used.
Selecting a Menu Item
DVD
(Finalize selection.)
Example)
Example)
DVD MENU
1 SUBTITLE
2 AUDIO
3 ANGLE
E
N
T
E
R
To return to the previous menu screen:
DVD/Video CD with “playback control”
1 2 3
4 5 6
7 8 9
0
(Select item.)
Select your favorite music
1. Love Supremes
2. Impressions
3. In a sentimental mood
Number:
Notes:
≥With some discs the menu screen may not appear even when
play is commenced. For details, refer to the guide provided
with the disc.
≥Pressing [9][:] while a video CD with playback control
is being played may cause you to return to the menu screen.
≥Operations vary according to the disc. For details, refer to the
guide provided with the disc.
≥Only a message as shown right is displayed on the DVD/Video
CD screen while driving the car. Only audio is enabled.
Press
E
N
T
E
R
Press
(Finalize selection.)
E
N
T
E
R
Press
Press
(Select item.)
Warning
When driving please enjoy sound only
To input the number again:
RETURN
RET
Press
Indicates pressing
a button.
Indicates pressing a button for
an extended period of time.
(Backward) (Forward)
DVD video/Video CD
≥Each time one of these buttons is pressed, the player
jumps to the start of the appropriate track (chapter).
≥If the backward button is pressed once, the player
returns to the start of the track (chapter) that is
currently being played.
Note:
≥ When playing a DVD video, there are
cases where it is not possible to
return to the start of a chapter that
spans 2 titles.
TRACK / SEARCH
Press
Fast Forward/Fast Backward
CD
Go to Beginning
CD
To resume normal playback:
PLAY
Press
TRACK / SEARCH
TRACK / SEARCH
TRACK / SEARCH TRACK / SEARCH
TRACK / SEARCH TRACK / SEARCH
Regular
speed
1.5 times 10 times 20 times
Regular
speed
1.5 times 10 times 20 times
Forward
CD
Backward
TRACK / SEARCH
TRACK / SEARCH
Regular
speed
20 times
Regular
speed
20 times
Forward
Backward
Hold
Hold
Press
Press
Press
Press
Hold
Hold
Indicates pressing a button at its center.
E
N
T
E
R
Note:
≥ If a non-existent track/title/chapter number is
input and entered, the command is invalid and the
display returns to regular mode.
Title, Chapter (DVD)
DVDs are divided into some large sections (titles) or
some small sections (chapters). Each section is
numbered; these numbers are called “Title number”
or “Chapter number”.
Track (CD)
CDs are divided into some sections (tracks). Each
section is numbered; these numbers are called
“Track number”.
E
N
G
L
I
S
H
8
CX-DV700U
17
E
N
G
L
I
S
H
7
CX-DV700U
16
Basic Disc Operations (continued)
(During playback)
(During playback)
PAUSE
≥The playback pauses.
PLAY
PAUSE
DVD video
The chapter that is currently being played repeats.
Video CD/CD
The track that is currently being played repeats.
REPEAT
6
To resume normal playback:
To resume normal playback:
Press Press
Hold (2 seconds)
REPEAT
6
Hold (2 seconds)
Press
Chapter/Track Repeat
or
Pause
CD
Repeat
CD
Indicates pressing
a button.
Indicates pressing a button for
an extended period of time.
1 (During playback)
Select the input mode.
Chapter :Chapter number input mode
Title :Title number input mode
2
3
Input the desired track/title/chapter
number.
≥Playback starts.
1 2 3
4 5 6
7 8 9
0
E
N
T
E
R
TITLE / CHAPTER
GRP
TRACK
Press
Press
Press
(Regular mode)
Starting Playback from a Specific
Track/Title/Chapter
Note:
≥ The repeat mode is also cancelled if:
[:], [9] or [∫] is pressed,
the disc is ejected.
DVD
CD
Track :Track number input mode
(Regular mode)
To input the number again:
RETURN
RET
Press
Chapter 1
Chapter 2
……
Chapter 1
……
Title 1 Title 2
CD
1 (During playback)
PAUSE
≥Playback is at about 1/3 normal speed.
2
TRACK / SEARCH
To pause:
To resume normal playback:
Note:
≥Reverse slow playback is not possible.
PLAY
Press
PAUSE
Press
Press
Hold (0.5 second)
Slow Playback
“Repeat” is displayed .
Track 1 Track 3
Track 2
……
Track
E
N
G
L
I
S
H
10
CX-DV700U
19
E
N
G
L
I
S
H
9
CX-DV700U
18
Basic Disc Operations (continued)
Use this menu during playback to select content, audio, subtitles, etc., from a menu
(the DVD menu) that is unique to each disc.
1 (During playback)
TITLE
MENU
≥The DVD menu appears on the
screen. (Pressing this button again
causes playback to start at the
scene from which the DVD menu
was called.)
Example)
2
(Select item.) (Finalize selection.)
E
N
T
E
R
To return to the previous
menu screen:
Note:
≥ DVD menu content and
operations depend on the
disc. For details, refer to
the guide provided with
your disc.
DVD MENU
1 SUBTITLE
2 AUDIO
3 ANGLE
RETURN
RET
Press
Press
E
N
T
E
R
Press
Press
DVD Menu
(During playback)
OSD
Press
On-Screen Displays (OSD)
CD
1 Current Operation Mode
This indicates the operation that is currently being performed.
(Loading, Eject, Play, Pause, Stop, FF, REW, Still, Repeat, Slow Play)
2 Title Number (DVD only)
This displays the number of the title that is currently being played.
3 Chapter Number (DVD only)
This displays the number of the chapter in the title that is currently being played.
Track Number (CD only)
This displays the number of the track that is currently being played.
4 Playback Time
This displays how much time has elapsed since the start of playback.
[CD only]
The display automatically differs according to whether CD-TEXT is present.
Notes:
≥ Each display may sometimes show “---”. This is not a malfunction.
≥ The On-Screen Display may not be displayed properly when the display size (Aspect) of the
connected display unit is set to “ZOOM”. In this case, select the other display size type:
NORMAL, JUST or FULL.
23 4
1
Each time the button is pressed:
ON (default) !# OFF
≥ In the case of CD, the On-Screen
Display cannot be turned off.
Indicates pressing
a button.
Indicates pressing a button for
an extended period of time.
Play
Title
Track 01
Artist
:PANA
:First song
:ABC
Track : 001 Time : 0 : 03 : 37
Play
CD PLAYER MODE
Track : 001 Time : 0 : 03 : 37
OSD
Press
(“No CD-Text” appears for
discs without CD-TEXT.)
If the DVD has multiple titles recorded on it, it is possible to select the preferred title
from the title menu to start playback.
Title Menu
1 (During playback)
2
TITLE
MENU
≥The title menu appears on the screen.
(Pressing this button again causes
playback to start at the scene from
which the title menu was called.)
Example)
TITLE MENU
Castles
Woods
Rivers
Lovers
Hold
(2 seconds)
(Select item.)
(Finalize selection.)
E
N
T
E
R
E
N
T
E
R
Press
Press
It is possible to change the subtitle language during play if the multiple languages are
recorded on the disc.
It is possible to switch the audio between stereo sound and monaural sound (L or R).
For DVDs which contain scenes which have been shot simultaneously from a number of
different angles the same scene can be viewed from each of these different angles during play.
Switching the Angle
E
N
G
L
I
S
H
12
CX-DV700U
21
E
N
G
L
I
S
H
11
CX-DV700U
20
Basic Disc Operations (continued)
(During playback)
SUBTITLE
1
≥When the button is held down, the subtitle language changes.
≥Initially, the subtitle language is the language that is set in the initial settings. (If this language has
not been recorded, the language that is displayed is determined by the disc.)
Notes:
≥The language number disappears if no operation is performed for 5 seconds.
≥The number of subtitle languages depends on the disc.
≥It may not be possible to switch the subtitles unless the unit is at the DVD menu (➡ page 19) or is
at the initial settings (➡ page 22).
≥There may be a brief delay before the subtitles appear.
Hold (2 seconds)
(During playback)
ANGLE
3
≥The audio channel display disappears
if no operation is performed for
5 seconds.
≥When either “L ch” or “R ch” is
selected, the left or right channel
audio is output on both the left and
right speakers.
Audio: Stereo
Audio: L ch
Audio: R ch
Hold
(2 seconds)
AUDIO
2
Hold
(2 seconds)
Notes:
≥The angle number disappears if no operation is performed for 5 seconds.
Switching between Stereo and Monaural
Indicates pressing
a button.
Indicates pressing a button for
an extended period of time.
It is possible to change the audio language during play if multiple audio languages are
recorded on the disc.
(During playback)
Notes:
≥The language number disappears if no operation is performed for 5 seconds.
≥The number of audio languages depends on the disc. (Some discs have only one language.)
≥It may not be possible to switch languages unless the unit is at the DVD menu or is at the initial
settings (➡ page 22).
AUDIO
2
Hold (2 seconds)
Switching the Audio Language
Switching the Subtitle Language
≥When the button is held down, the audio language changes.
≥When the button is held down, the angle changes.
≥When the button is held down, the mode is switched
between stereo and monaural.
E
N
G
L
I
S
H
14
CX-DV700U
23
E
N
G
L
I
S
H
13
CX-DV700U
22
≥ The setting is completed.
0
Press
1. Menu Language
1. English
2. French
3. Spanish
2. Subtitle Language
1. English
2. French
3. Spanish
3. Audio Language
1. English
2. French
3. Spanish
Make Settings.
3
4. Other
(See below)
5. Return
(The display returns to Main Menu.)
4. Other
(See below)
5. Disp Off
(Subtitle language is not displayed.)
6. Return
(The display returns to “Main Menu”.)
4. Other
(See below)
5. Return
(The display returns to “Main Menu”.)
Changing the Initial Settings
Indicates pressing
a button.
Notes:
≥After the initial settings have been changed and entered, the player returns to the start of the disc
and begins playback.
≥When the disc has predetermined language or other settings, the initial settings are not reflected.
1. English
2. French
3. Spanish
4. Other
5. Return
<Menu Language>
Select
Language
1. English
2. French
3. Spanish
4. Other
5. Disp Off
6. Return
<Subtitle Language>
Select
Language
1. English
2. French
3. Spanish
4. Other
5. Return
<Audio Language>
Select
Language
1 2 3
4 5 6
Press
Note:
≥A disc supporting closed captioning and subtitles may overlap each other on the screen.
In this case, turn the subtitle off.
R
E
T
U
R
N
T
IT
L
E
S
U
B
T
IT
L
E
AUDIO
ANGLE
R
E
P
E
A
T
T
R
A
C
K
C
A
R
D
V
D
P
LA
Y
E
R
/R
E
C
E
IV
E
R
T
IT
L
E
/ C
H
A
P
T
E
R
S
T
O
P
T
R
A
C
K
/ S
E
A
R
C
H
P
A
U
S
EP
L
A
Y
RET
OSD
GRP
123
4
56
7
8
9
0
MENU
E
N
T
E
R
PWR
Select the Menu.
(while stopped or No disc)
1
TITLE
MENU
Press
<
Main Menu>
1. Menu Language : English
2. Subtitle Language : English
3. Audio Language : English
4. TV Aspect : 16:9
5. TV Mode (4:3) : Pan&Scan
6. On-Screen Messages : ON
7. Audio Output Level : 3
8. D. Range Compression : OFF
0:Exit
The initial setting screen is displayed.
Make Settings.
(➡ pages 23–25)
3
Finish the Initial
Settings.
4
1 2 3
4 5 6
7 8
Select the item.
2
Press
In “Other” cases (Menu Language, Subtitle Language, Audio Language)
1
2To input the number again:
RETURN
RET
Press
Input the four digit
language code.
(➡ page 38)
Setting is finished and the display
returns to “Main Menu”.
(Finalize selection.)
E
N
T
E
R
Press
1 2 3
4 5 6
7 8 9
0
Press
(Example: 2 Subtitle Language)
The settings are not reflected
unless “0:Exit” is used to exit
the initial setting screen.
The settings for the language, display, etc.can changed.
E
N
G
L
I
S
H
16
CX-DV700U
25
E
N
G
L
I
S
H
15
CX-DV700U
24
Changing the Initial Settings (continued)
5. TV Mode
6. On-Screen Messages
Make Settings
3
TV picture mode (4:3)
Set this when playing wide-screen video on a conventional-size
(4:3) TV.
1. Pan & Scan: Plays wide-screen video in Pan & Scan mode
(in which the left and right edges of the screen
are cut off)
2. Letterbox: Plays wide-screen video in Letter Box mode
(in which black bands appear at the top and
bottom of the screen)
3. Return: The display returns to “Main Menu”.
This is to select On-Screen Display messages which will be
displayed when On-Screen Display is turn off by pressing [OSD].
(➡ Page 18)
1. ON: When the power is turned on, On-Screen Display
messages such as “Play” and “Pause” will always be
displayed on the screen for 5 seconds.
(default)
2. OFF: When the power is turned on, On-Screen Display
messages such as “Play” and “Pause” will not be
displayed on the screen.
3. Return: The display returns to “Main Menu”.
Make Settings
3
Note:
≥ If “Pan & Scan” or “Letterbox” is already set in the software, this setting is ignored.
4. TV Aspect
1. 4:3 : Use this setting when a conventional TV monitor is
connected.
2. 16:9 : Use this setting when a wide-screen TV monitor is
connected.
≥ Wide screen video can be played on the full screen
3. Return:The display returns to “Main Menu”.
7. Audio Output Level
1. 1 (Minimum level)
2. 2 (Middle level)
3. 3 (Maximum level) (default)
4. Return: The display returns to “Main Menu”.
For your reference:
We recommend that you select the default when you use this player in the system
configurations (➡ pages 31–33), and adjust the volume control on the display unit or stereo
unit connected to this player.
In the case that sound volume is too loud when you use this player in another system
configuration, select another setting to adjust the audio output level.
CD
8. D. Range Compression
Dynamic Range Compression
By compressing the range of the playback level (the dynamic range), it is possible to maintain the
impact of audio even at low volumes.
This function only works with Dolby Digital encoded material.
1. Minimum: Most compressed mode like TV broadcasts, etc.
2. Standard: Mode recommended by software creators for
listening at low volumes.
3. OFF: Does not compress the dynamic range.
4. Return: The display returns to “Main Menu”.
Note:
≥ When it is difficult to hear comparatively quiet sounds (such as movie dialogue), setting
“Minimum” will make those sounds easier to hear.
1. 4 : 3
2. 16 : 9
3. Return
<TV Aspect>
Select
TV Aspect
1. Pan & Scan
2. Letterbox
3. Return
<TV Mode>
Select
TV Mode
1 ON
2 OFF
3 Return
<On-Screen Messages>
Select
On-Screen
Messages
1. 1
2. 2
3. 3
4. Return
<Audio Output Level>
Select
Audio Output
Level
1 Minimum
2 Standard
3 OFF
4 Return
<D.Range Compression>
Select
D.Range
Compression
E
N
G
L
I
S
H
18
CX-DV700U
27
E
N
G
L
I
S
H
17
CX-DV700U
26
Installation
WARNING
The installation information is designed for experienced installers and is not
intended for non-technical individuals. It does not contain warnings or cautions of the
potential dangers involved in attempting to install this product.
Any attempt to install this product in a motor car by anyone other than a qualified
installer could cause damage to the electrical system and could result in serious
personal injury or death.
No. Item Diagram Q’ty
P
O
W
E
R
1
2
3
4
5
6
Tapping Screws
(5 mm·k16 mm)
Screw with Washers
(5 mm·k6 mm)
4
4
1
1
1
1
2
1
7
8
9
Remote Control Signal Receiver
(including Double-Sides Tape)
Power Connector
Remote Control Unit
Battery (CR2025)
L-Shaped Brackets
Clamp Connector
❐ Installation Hardware❐ Overview
This product should be installed by a
professional. However, if you plan to install this
unit yourself, your first step is to decide where to
install it. The instructions in these pages will
guide you through the remaining steps:
(Please refer to the “WARNING” statement
above.)
≥Identify and label the car wires.
≥Connect the car wires to the wires of the power
connector.
≥Check the operation of the unit.
If you encounter problems, please consult your
nearest professional installer.
Caution: This unit operates with a 12 V DC
negative ground auto battery system only. Do
not attempt to use it in any other system. Doing
so could cause serious damage.
Before you begin installation, look for the
following items which are packed with your unit.
≥Warranty Card…Fill this out promptly.
≥Panasonic Servicenter List for Service
Directory …Keep for future reference in case
the unit needs servicing.
12 V DC Test
Bulb
Electrical Tape Side-cut pliers
❐ Identify All Leads
The first step in installation is to identify all the car
wires you’ll use when hooking up your sound
system. As you identify each wire, we suggest that
you label it using masking tape and a permanent
marker. This will help avoid confusion when making
connections later.
Note: Do not connect the power connector to the
unit until you have made all connections. If there are
no plastic caps on the stereo hooking wires, insulate
all exposed leads with electrical tape until you are
ready to use them. Identify the leads in the following
order.
Power Lead
If your car has a radio or is pre-
wired for one:
Cut the connector wires one at a
time from the plug (leaving the
leads as long as possible) so
that you can work with
individual leads.
Turn the ignition on to the accessory position, and
ground one lead of the test bulb to the chassis.
Touch the other lead of the test bulb to each of the
exposed wires from the cut radio connector plug.
Touch one wire at a time until you find the outlet that
causes the test bulb to light. Now turn the ignition
off and then on. If the bulb also turns off and on, that
outlet is the car power lead. If your car is not wired
for an audio unit: Go to the fuse block and find the
fuse port for radio (RADIO), accessory (ACC), or
ignition (IGN).
Battery Lead
If your unit has a yellow lead, you will need to locate
the car’s battery lead. Otherwise you may ignore this
procedure. (The yellow battery lead provides
continuous power to maintain a clock, memory
storage, or other function.)
If your car has a radio or is pre-wired for one:
With the ignition and headlights off, identify the car
battery lead by grounding one lead of the test bulb to
the chassis and checking the remaining exposed
wires from the cut radio connector plug.
If your car is not wired for an audio unit:
Go to the fuse block and find the fuse port for the
battery which is usually marked BAT.
❐ Required Tools
You’ll need a screwdriver, and the following:
1
Cord Clamp
E
N
G
L
I
S
H
20
CX-DV700U
29
E
N
G
L
I
S
H
19
CX-DV700U
28
Installation (continued)
❐ Connect All Leads
Now that you have identified all the wires in the car,
you’re ready to begin connecting them to the DVD
player wires. The wiring diagram (➡ pages 31–33)
shows the proper wiring and color coding of the
leads.
We strongly recommend that you test the unit
before making a final installation.
You can set the unit on the floor and make
temporary connections to test the unit. Use
electrical tape to cover all exposed wires.
Important: Connect the red power lead last, after
you have made and insulated all other connections.
Ground
Connect the black ground lead of the power
connector to the metal car chassis.
Battery
Connect the yellow battery lead to the correct radio
wire or to the battery fuse port on the fuse block.
Power
Connect the red power lead to the correct power
cord according to your system configuration by
referring to the wiring diagram .
If the unit functions properly with all these
connections made, disconnect the wires and
proceed to the final installation.
❐ Final Installation
Lead Connections
Connect all wires, making sure that each connection
is insulated and secure. Bundle all loose wires and
fasten them with tape so they won’t fall down later.
Congratulations! After making a few final checks,
you’re ready to enjoy your mobile DVD player.
❐ Final Checks
1. Make sure that all wires are properly connected
and insulated.
2. Turn on the ignition to check the unit for proper
operation.
If you have difficulties, consult your nearest
authorized professional installer for assistance.
❐ Preparation
≥We strongly recommend that you wear gloves for
installation work to protect yourself from injuries.
≥ Disconnect the cable from the negative
-
battery
terminal (see caution below).
≥ Unit should be installed in a horizontal position
with the front end up at a convenient angle, but
not more than 30o.
Caution: Do not disconnect the battery terminals of
a car with a trip or navigational computer since all
user settings stored in memory will be lost.
Instead take extra care with installing the unit to
prevent shorts.
❐ When installing the unit with the L-Shaped Brackets
a) Attach the L-Shaped Brackets 7 on both sides of unit with the Screw with Washers 2.
b) Install the unit with Tapping Screws 1.
Unit
7 L-Shaped Bracket
2 4 Screw with Washers (5 mm·k6 mm)
1 4 Tapping Screws (5 mm·k16 mm)
30˚ or less
Cautions:
≥ All other installation methods require the use of dedicated metal fittings. Consult with a qualified
servicing engineer or your dealer if other methods are required.
≥ When drilling holes in the car, make sure that you do not damage any pipes or wiring on the
underside of the car.
≥ When installing the unit, make sure that the cord is positioned in a location where it will not pinched
or damaged when the seat slides forward or backward.
CX-DV700U (Rear)
Display Unit
(Be sure to install the display unit
at least 1m away from the controller unit.)
Fuse (5 A)
Not Used
Parking brake connection lead
ACC
Power lead
to the ACC power,
+12 V DC
Battery lead
To the battery,
continuous +12 V DC
Ground lead
To a clean, bare metallic part
of car chassis.
Black
Red
Resistor (1 k )
Blue/Yellow Stripe
4
Power Connector
VIDEO-CONT
Green/Yellow Stripe
When connected to the lead colored in dark blue of the
Panasonic CD receiver or cassette receiver having an AUX-IN
input terminal, instead of connecting to the ACC power source,
the power of unit can be linked to that of receiver.
BATTERY 5A
Yellow
(L)
(R)
(Y)
Yellow
POWER DISPLAY UNIT RGB
(L)
(R)
(Y)
CY-VM1500
Controller Unit
(Rear)
Yellow
Connection Cable
(Length: 5 m)
Terminal for
Connection Cable
Power Connector
Input Lead
Output Lead
To the rear view camera.
Please consult your nearest authorized
professional installer for assistance.
Gray
Green
White
Black
Red
Fuse (3 A)
CQ-DFX501U
CD Changer
Control Connector
Antenna
Dark Blue
Power
Connector
AUX-IN
CONNECTOR
Red (R)
White (L
)
(AUX-IN)
Red (R)
White (L)
RCA Cord
(sold separately)
Red (R)
White (L)
PO
W
ER
Remote Control Signal receiver
(supplied)
PARKING BRAKE
To spots where the power source is cut
when the engine key is removed.
Do not connect to spots which have a
constant power source.
Lay the wire so that it does not get tangled
up with screws or the moving parts of a seat rail.
To the car chassis metal.
To the parking brake lever.
Parking brake connection lead
Accessory Power Source (ACC Power Source)
Input lead (12 V DC)
Ground lead
Not UsedVIDEO OUT
POWER
AUDIO OUT
DIGITAL OUT REMOTE IN
E
N
G
L
I
S
H
22
CX-DV700U
31
E
N
G
L
I
S
H
21
CX-DV700U
30
Wiring Connections
❐ Wiring diagram
Basic system configuration
Cautions:
≥ This product is designed to operate of a 12 V, negative ground battery system.
≥ To prevent damage to the unit, be sure to follow the connection diagram below.
≥ Remove approx.
1
/
4
” (5 mm) of protective covering from the ends of the leads before connecting.
≥ Do not insert the power connector into the unit until the wiring is completed.
≥ Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all
cables and keep cable terminals free from touching any metal parts.
≥ Note that if your car has a driving computer or a navigation computer, disconnecting the battery
cables may cause the contents of memory for these computers to be lost.
≥ The parking brake connection should be connected by a professional installer, if possible. In case of
difficulty, please consult your nearest authorized Panasonic Servicenter.
Parking brake Foot brake
The parking brake lever
position varies depending
on the car model.
Parking brake switch
Brake lamp
car chassis
Clamp connector
(supplied)
Battery
❐ Connecting the parking brake connection lead
Vehicle Cord
Parking Brake Cord
Element
Cover
Push the end of the cord in
until it touches this part.
Of the 2 cords emerging from the parking brake
switch, connect the player’s parking brake
connection cord to the one that is not connected
to the car’s chassis while the brake is in the
released state.
Connecting the Clamp Connector
8
≥Attach the clamp connector to the vehicle cord at a suitable position.
≥Note that if the cord being clamped onto is too thin (0.3 mm
2
or
less), the connection may not be adequate.
1
Push the end of the side brake cord into the hole on the clamp
connector.
Place the vehicle cord into the groove in the clamp connector.
2
While making sure that the cords do not slip out of the clamp
connector, press the element down with a pair of pliers.
3
Close the cover until it snaps shut.
By performing this connection, remote control signals
can be received by the Display Unit.
(Do not connect the Remote Control Signal Receiver
when this connection has been performed.)
When connecting or disconnecting the cord, be
absolutely sure to take hold of the molded part of
the plug (and not the cord itself) and proceed.
Accessories for use
No. Item Q’ty
3
Remote Control Signal
Receiver
1
4
Power Connector 1
9
Cord Clamp 1
Attaching the remote control signal receiver
P
O
W
E
R
Double-sided tape
for the remote control
signal receiver
Remote control
signal receiver 3
Cord Clamp 9
E
N
G
L
I
S
H
24
CX-DV700U
33
E
N
G
L
I
S
H
23
CX-DV700U
32
Wiring Connections (continued)
A
C
3
0
0
VOL
S
EL
PW
R
SO
U
R
C
E
M
U
T
E
1
2
3
4
D
R
C
O
M
P
P
O
S
I
S
P
C
D
IM
S
P
A
C
E
P
O
S
I
T
I
O
N
D
I
M
M
E
R
P
R
O
L
O
G
IC
D
I
G
I
T
A
L
su
pe
r brigh
t m
u
lti-color
d
isp
la
y & 30
W
p
ow
er a
m
plifier for
ce
nte
r
sp
eaker
D
IG
IT
A
L
SU
R
R
O
U
N
D
PR
O
C
E
SS
O
R
AUX-IN
CONNECTOR
PREAMP OUT
CONNECTOR
(Rear)
White (L)
Red (R)
White (L)
Red (R)
RCA Cord
(sold separately)
(L)
CY-AC300
Operating Unit
CY-AC300
Main Unit (Rear)
(Front)
CONTROL
UNIT
SUB·W
Black
Red
Resistor (220 )
(BATTERY 5 A)
Black/Green Stripe
(CENTER)
Blue/White Stripe
Center speaker
EAB-CF2
Sub woofer
Left speaker
(Rear)
Left speaker
(Front)
Right speaker
(Rear)
Right speaker
(Front)
Center Speaker Cord
(AMP-CONT MAX 0.1 A)
Black
Fuse (5 A)
Yellow
Operating Unit/Main Unit
Connecting Cord
Power Connector
(When a two-way cord is used)
(ACC)
Ground lead
To a clean, bare metallic
part of car chassis.
Power lead
To the ACC power
+12 V DC
Battery lead
To the car battery
continuous + 12 V DC
External Amplifier
Control Power Cord
To External Amplifier
Be certain to connect the accessory
power cord only to the ACC
power source in the car.
Connect the battery power cord to a
connector that is always supplied with
power from the car battery.
REAR
FRONT
ANALOG-IN
DIGITAL-IN
Optical Fiber Cable
(CA-LRD60: Sold separately)
Notes on handling optical fiber cable
• Do not bend the cable sharply.
• Do not allow the cable to be damaged
by getting it caught in the
door, placing a heavy object on it, etc.
(R)
(R)
RCA Cord
(sold separately)
Amplifier Control
Power Cord
(Blue/White Stripe)
Amplifier Control Power Cord
(Blue w/White Stripe)
RCA Cord
(sold separately)
CY-M7052
(Top)
CY-M9054
(Top)
(R) Red
(R)(L)White (L)
(R) (R)
(L) (L)(R)
(L)
(Connect to AMP-CONT)
RCA Cord
(sold separately)
POWER SUPPLY
L
LL
R
R
R
Ground lead
To a clean, bare metallic part
of car chassis.
Black
PARKING BRAKE
Parking brake
connecting lead (➡ Page 30)
CX-DV700U (Rear)
Display Unit
(Be sure to install the display unit
at least 1m away from the controller unit.)
ACC
Power lead
to the ACC power,
+12 V DC
Red
Resistor (1 k )
4
Power Connector
VIDEO-CONT
Green/Yellow Stripe
When connected to the external amplifier control power cord (AMP-CONT)
of CY-AC300, instead of connecting to the ACC power source, the power
of unit can be linked to that of CY-AC300.
(L)
(R)
(Y)
Yellow
POWER DISPLAY UNIT RGB
(L)
(R)
(Y)
CY-VM1500
Controller Unit
(Rear)
Yellow
Connection Cable
(Length: 5 m)
Terminal for
Connection Cable
Power Connector
Input Lead
Output Lead
To the rear view camera.
Please consult your nearest authorized
professional installer for assistance.
Gray
Green
White
Black
Red
Fuse (3 A)
CQ-DFX501U
Antenna
Power
Connector
Red (R)
White (L)
Red (R)
White (L)
RCA Cord
(sold separately)
Red (R)
White (L)
P
O
W
E
R
Remote Control Signal Receiver
3
(supplied)
Blue/Yellow Stripe
Fuse (5 A)
Not Used
Battery lead
To the battery,
continuous +12 V DC
BATTERY 5A
Yellow
To spots where the power source is cut
when the engine key is removed.
Do not connect to spots which have a
constant power source.
Lay the wire so that it does not get tangled
up with screws or the moving parts of
a seat rail.
To the car chassis metal.
To the parking brake lever.
Parking brake connection Lead
Accessory Power Source (ACC Power Source)
Input Lead (12 V DC)
Ground lead
If interference
occurs in AM radio
reception, connect
this screw to the
car chassis
metal.
Not Used
VIDEO OUT
POWER
AUDIO OUT
DIGITAL
OUT
REMOTE IN
Advanced system configuration
Examples of system upgrading combination: Color LCD Monitor (CY-VM1500)
Digital Surround Processor (CY-AC300)
Power Amplifier (CY-M9054 or CY-M7052
CD Player/Receiver with Changer Control (CQ-DFX501U)
By performing this connection, remote control signals
can be received by the Display Unit.
(Do not connect the Remote Control Signal Receiver
when this connection has been performed.)
When connecting or disconnecting the cord, be absolutely sure to take
hold of the molded part of the plug (and not the cord itself) and proceed.
E
N
G
L
I
S
H
26
CX-DV700U
35
E
N
G
L
I
S
H
25
CX-DV700U
34
Troubleshooting
Preliminary Steps
Check and take steps as described in the tables below.
If You Suspect Something Wrong
Immediately switch power off.
Disconnect the power connector and check that there is
neither smoke nor heat from the unit before asking for
repairs. Never try to repair the unit yourself because it
is dangerous to do so.
Cautions:
≥ Do not use the unit if it malfunctions or if
something is wrong.
≥ Do not use the unit in abnormal condition,
for example, without sound, or with
smoke or foul smell, can cause ignition or
electric shock. Immediately stop using it
and call the store where you purchased it.
≥ Play fails to start even
when PLAY is
pressed.
≥ Play starts but then
stops immediately.
No picture.
No sound from the
external speakers of the
stereo system or other
equipment.
No menu play of Video
CD.
No subtitles.
No key operation is
effective.
Picture is distorted
during fast forward or
fast backward.
–
10
37
12
Cause/Step PageTrouble
≥ Condensation has formed: wait about 1 to 2 hours to allow the
player to dry out.
≥ This player cannot play discs other than DVDs, Video CDs and
CDs.
≥ The disc may be dirty and may require cleaning.
≥ Ensure that the disc is installed with the label side up.
≥ Ensure that the player is connected properly.
≥ Ensure that the input setting of the connected display unit is
made correctly.
≥ Ensure that the player is connected properly.
≥ Ensure that the input settings for the stereo system are correct.
≥ Some operations may be prohibited by the disc.
≥ Two REMOTE IN connectors are connected.
≥ This function works only with Video CDs with playback control.
≥ The picture will be somewhat distorted at times: this is normal.
≥ Subtitles appear only with discs which contain them.
Troubleshooting Tips
Alternative audio
soundtrack (or subtitle)
languages fail to be
selected.
≥ An alternative language is not selected with discs which do not
contain more than one language.
≥ In the case of some discs, the alternative language cannot be
selected by switching the audio subtitle language. Try selecting
it from the DVD menu if one is available.
Audio and/or subtitle
language is not the one
selected at the initial
settings.
No 4:3 (16:9) picture.
No On-Screen Display.
The menu is not
displayed in the
preferred language.
The sound volume level
is too low or too high.
≥ If the audio and/or subtitle language does not exist on the DVD,
the language selected at the initial settings will not be
seen/heard.
≥ Choose the correct setup “TV Aspect” item which matches the
TV set used.
≥ The “OFF” setting is selected at “On-Screen Messages”: select
“ON”.
≥ Confirm the setting at the menu of “Subtitle Language”.
≥ Adjust the output level setting at the menu of “Audio Output
Level”.
If the unit begins to operate malfunctionally
Reset Switch
When you press this switch with a tough pointed
object, the initial setting is restored after irregular
recovery. And, all your settings will be canceled.
Caution:
Press this switch when any operation buttons do not
work. If the unit does not become restored even after
pressing the switch, contact your nearest Panasonic
Servicenter for service.
IN
D
IC
ATO
R
■
D
V
D
-
V
ID
E
O
/V
ID
E
O
C
D
/C
D
P
L
A
Y
B
A
C
K
■
D
IG
IT
A
L
O
U
T
P
U
T
■
9
6
k
H
z
2
4
b
it D
/A
C
O
N
V
E
R
T
E
R
T
E
X
T
D
I
G
I
T
A
L
CX-DV700
M
O
B
I
L
E
D
V
D
V
I
D
E
O
P
L
A
Y
E
R
Angle cannot be
changed.
≥ This function is dependent on software availability. Even if a
disc has a number of angles recorded, these angles may be
recorded for specific scenes only.
Trouble
Troubleshooting Tips (continued)
31-33
31-33
31-33
31-33
14
31,33
14, 39
–
20
20
19
21
20
24
24
20
25
Cause/Step Page
E
N
G
L
I
S
H
28
CX-DV700U
37
E
N
G
L
I
S
H
27
CX-DV700U
36
Troubleshooting (continued)
Error Display Messages
Playback Error
Please eject.
37
Error Display
Appears on the display when the disc is dirty, scratched or
upside down, and when the disc cannot be played with this
player.
Check the disc by ejecting it.
This disc may not be played
in your region.
Please eject.
10
Appears on the display when the DVD disc with Region No. other
than “1” or “ALL” is played.
Confirm the disc on which the Region No. is “1” or “ALL”.
This type of disc cannot be played.
Please eject.
10
Appears on the display when a PAL system DVD is played.
Confirm that the system for the disc is NTSC.
Mechanical Error
Please eject.
–
Appears on the display when the playback mechanism is
seriously damaged.
In this case, eject the disc and contact your nearest authorized
Panasonic Servicenter for service.
Maintenance
Your product is designed and manufactured to ensure a minimum of maintenance. Use a soft cloth for routine
exterior cleaning. Never use benzine, thinner or other solvents.
Product Servicing
If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest
authorized Panasonic Servicenter. The product should be serviced only by a qualified technician.
Replace the Fuse
Use fuses of the same specified rating (5 amps). Using different substitutes or fuses with higher ratings, or
connecting the product directly without a fuse, could cause fire or damage to the unit.
If the replacement fuse fails, contact your nearest Panasonic Servicenter for service.
Maintenance
Care of the Unit
❐Cleaning this Unit
Use a dry, soft cloth to wipe.
Notes on Disc
How to hold the disc
≥ Do not touch the underside of the disc.
≥ Do not make scratches on the discs.
≥ Do not bend disc.
≥ When not in use, keep disc in the case.
Do not use irregular shaped discs.
Do not leave discs on the following places:
≥ Direct sunlight
≥ Near car heaters
≥ Dirty, dusty and damp areas
≥ Seats and dashboards
Disc cleaning
Use a dry, soft cloth to wipe from the center
outward.
Caution on new discs
A new disc may have rough edges on its inner and
outer perimeter. These may cause malfunction.
Remove the rough edges using a pencil, etc.
❐Caution on Cleaning
Never use solvents such as benzine, thinner as they
may mar the surface of the unit.
Label side
<Right> <Wrong>
Rough edge
Rough edge
Do not use irregular shaped discs.
Cause/Step Page
E
N
G
L
I
S
H
30
CX-DV700U
39
E
N
G
L
I
S
H
29
CX-DV700U
38
Language Code List
8277 Rhaeto-Romance
8279 Romanian
8285 Russian
8365 Sanskrit
8368 Sindhi
8372 Serbo-Croatian
8373 Singhalese
8375 Slovak
8376 Slovenian
8377 Samoan
8378 Shona
8379 Somali
8381 Albanian
8382 Serbian
8385 Sundanese
8386 Swedish
8387 Swahili
8465 Tamil
8469 Telugu
8471 Tajik
8472 Thai
8473 Tigrinya
8475 Turkmen
8476 Tagalog
8479 Tonga
8482 Turkish
8484 Tatar
8487 Twi
8575 Ukrainian
8582 Urdu
8590 Uzbek
8673 Vietnamese
8679 Volapük
8779 Wolof
8872 Xhosa
8979 Yoruba
9072 Chinese
9085 Zulu
Code Language Name
How to input the language code, refer to page 23.
7289 Armenian
7365 Interlingua
7378 Indonesian
7383 Icelandic
7384 Italian
7387 Hebrew
7465 Japanese
7473 Yiddish
7487 Javanese
7565 Georgian
7575 Kazakh
7576 Greenlandic
7577 Cambodian
7578 Kannada
7579 Korean
7583 Kashmiri
7585 Kurdish
7589 Kirghiz
7665 Latin
7678 Lingala
7679 Laothian
7684 Lithuanian
7686 Latvian, Lettish
7771 Malagasy
7773 Maori
7775 Macedonian
7776 Malayalam
7778 Mongolian
7779 Moldavian
7782 Marathi
7783 Malay
7784 Maltese
7789 Burmese
7865 Nauru
7869 Nepali
7876 Dutch
7879 Norwegian
7982 Oriya
8065 Panjabi
8076 Polish
8083 Pashto, Pushto
8084 Portuguese
8185 Quechua
Code Language Name
6565 Afar
6566 Abkhazian
6570 Afrikaans
6577 Ameharic
6582 Arabic
6583 Assamese
6588 Aymara
6590 Azerbaijani
6665 Bashkir
6669 Byelorussian
6671 Bulgarian
6672 Bihari
6678 Bengali; Bangla
6679 Tibetan
6682 Breton
6765 Catalan
6779 Corsican
6783 Czech
6789 Welsh
6865 Danish
6869 German
6890 Bhutani
6976 Greek
6978 English
6979 Esperanto
6983 Spanish
6984 Estonian
6985 Basque
7065 Persian
7073 Finnish
7074 Fiji
7079 Faroese
7082 French
7089 Frisian
7165 Irish
7168 Scots Gaelic
7176 Galician
7178 Guarani
7185 Gujarati
7265 Hausa
7273 Hindi
7282 Croatian
7285 Hungarian
Code Language Name
Definition of Terms
Digital audio output connector (Optical)
The digital audio output connector (optical) converts
electrical signals into optical signals and transfers
them to the amplifier. Consequently, it has a number
of features including its immunity from electrical
interference from external sources and its ability to
prevent the generation of noise and its minimal
effect on the external environment.
Dolby Digital
Dolby Digital is a digital sound compression
technique developed by the Dolby Laboratories
Licensing Corporation.
Supporting 5.1-channel surround sound, as well as
stereo (2-channel) sound, this technique enables a
large quantity of sound data to be efficiently
recorded on a disc.
Interactive DVD
An interactive DVD is DVD software which includes
multiple angles, multiple plot endings, etc.
Letterbox screen
This refers to a screen on which the playback picture
of wide-screen DVDs or Video CDs appears with
black bands running along the top and bottom.
Linear PCM audio (LPCM)
This refers to a signal recording format used in CDs.
While CDs are recorded in 44.1 kHz/ 16 bit, DVDs are
recorded in 48 kHz/16 bit up to 96 kHz/24 bit, thus
achieving higher quality audio than that of CDs.
MPEG
(Moving Picture Experts Group)
MPEG is an international standard format for the
compression of motion video as defined by the
Moving Picture Experts Group, a working committee
which functions under the auspices of the
International Standardization Organization and
International Electrotechnical Commission. The
Group established the MPEG 1 standard in 1991 and
the MPEG2 standard in 1994. MPEG2 builds on
MPEG1 with many improvements, and it yields a
higher picture quality level.
Pan & Scan screen
This refers to a screen on which the playback picture
of wide-screen DVDs or Video CDs is cut off at the
left and right sides.
Playback control (Video CD)
If the Video CD has “With Playback Control” or others
written on the disc surface or on the jacket, the
scenes or information to be viewed (or listened to)
can be selected interactively with the screen by
looking at the menu shown on the screen.
In these instructions, playback using the menu
screen is referred to as the “menu play” for video
CDs. This player supports Video CDs with playback
control.
Title, Chapter (DVD)
DVDs are divided into some large sections (titles) or
some small sections (chapters). Each section is
numbered; these numbers are called “Title number”
or “Chapter number”.
Track (Video CD/CD)
Video CDs or CDs are divided into some sections
(tracks). Each section is numbered; these numbers
are called “Track number”.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories. Confidential unpublished
works.
C
1992–1997 Dolby Laboratories.
All rights reserved.
Chapter 1
Chapter 2
……
Chapter 1
……
Title 1 Title 2
Track 1 Track 3
Track 2
……
Track
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
Panasonic CQDVD700U Mode d'emploi
- Catégorie
- Systèmes vidéo de voiture
- Taper
- Mode d'emploi
- Ce manuel convient également à