Yamaha PianoCraft MCR-750 Le manuel du propriétaire

Printed in China MCR-750_G-1

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

G

Micro Component System

Micro-Chaîne

MCR-750

i

CAUTION

Use of controls or adjustments or performance of procedures

other than those specified herein may result in hazardous

radiation exposure.

AVERTISSEMENT

L’utilisation de commandes et l’emploi de réglages ou de

méthodes autres que ceux décrits ci-dessous, peuvent

entraîner une exposition à un rayonnement dangereux.

VORSICHT

Die Verwendung von Bedienelementen oder die Einstellung

bzw. die Ausführung von anderen als in dieser Anleitung

beschriebenen Vorgängen kann zu Gefährdung durch

gefährliche Strahlung führen.

OBSERVERA

Användning av reglage eller justeringar eller utförande av

åtgärder på annat sätt än så som beskrivs häri kan resultera i

farlig strålning.

ATTENZIONE

L’uso di controlli, regolazioni, operazioni o procedure non

specificati in questo manuale possono risultare in esposizione

a radiazioni pericolose.

PRECAUCIÓN

El uso de los controles, los ajustes o los procedimientos que

no se especifican enste manual pueden causar una exposición

peligrosa a la radiación.

LET OP

Gebruik van bedieningsorganen, instellingen of procedures

anders dan beschreven in dit document kan leiden tot

blootstelling aan gevaarlijke stralen.

LASER Specification:

Class 1 LASER Product

Wave length: 790 nm (CDs)/658 nm (DVDs)/405 nm (BDs)

Laser output: max. 1 mW

Caractéristiques du LASER :

Produit LASER de Classe 1

Longueur d’onde : 790 nm (pour les CD)/658 nm (pour les

DVD)/405 nm (pour les Blu-ray)

Puissance du laser : max. 1 mW

LASER-Spezifikation:

LASER-Produkt der Klasse 1

Wellenlänge: 790 nm (CD)/658 nm (DVD)/405 nm (BD)

Laser-Ausgang: max. 1 mW

LASER-specifikationer:

Klass 1 LASER-produkt

Våglängd: 790 nm (CD)/658 nm (DVD)/405 nm (BD)

Laseruteffekt: max. 1 mW

Specifiche LASER:

Prodotto con LASER classe 1

Lunghezza d’onda: 790 nm (CDs)/658 nm (DVDs)/405 nm (BDs)

Emissione laser: max. 1 mW

Especificaciones LÁSER:

Producto LÁSER de Clase 1

Longitud de onda: 790 nm (CD)/658 nm (DVD)/405 nm (BD)

Salida de láser: máxima de 1 mW

LASER specificatie:

Klasse 1 LASER product

Golflengte: 790 nm (CD's)/658 nm (DVD's)/405 nm (BD's)

Laservermogen: max. 1 mW

The laser component in this product is capable of emitting radiation

exceeding the limit for Class 1.

Le laser de cet appareil peut émettre un rayonnement dépassant les

limites de la classe 1.

Die Laser-Komponente in diesem Produkt kann eine Strahlung

abgeben, die den Grenzwert der Klasse 1 übersteigt.

Laserkomponenten i denna apparat kan avge en strålning som

överskrider gränsvärdet för klass 1.

Il laser contenuto in questo prodotto è in grado di emettere

radiazioni eccedenti i limiti fissati per la Classe 1.

El componente láser de este producto es capaz de emitir radiación

que sobrepasa el límite establecido para la clase 1.

De lasercomponent in dit product is in staat stralen te produceren

die de limiet voor Klasse 1 overstijgen.

CAUTION:

INVISIBLE LASER RADIATION WHEN OPEN.

DO NOT STARE INTO BEAM.

INVISIBLE LASER RADIATION WHEN OPEN.

AVOID DIRECT EXPOSURE TO THE BEAM.

DANGER:

ii

VAROITUS

Muiden kuin tässä esitettyjen toimintojen säädön tai asetusten

muutto saattaa altistaa vaaralliselle säteilylle tai muille

vaarallisille toiminnoille.

DK

Advarsel: Usynlig laserstråling ved åbning når

sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for

stråling.

Bemærk: Netafbryderen er sekundært indkoblet og ofbryder

ikke strømmen fra nettet. Den indbyggede netdel er derfor

tilsluttet til lysnettet så længe netstikket sidder i stikkontakten.

N

Observer: Nettbryteren er sekundert innkoplet. Den

innebygdenetdelen er derfor ikke frakoplet nettet så lenge

apparatet er tilsluttet nettkontakten.

S

Klass 1 laseraparat

Varning! Om apparaten används på annat sättþän i denna

bruksanvisning specificerats, kan användaren utsättas för osynlig

laserstrålning, som överskrider gränsen för laserklass 1.

Observera! Strömbrytaren är sekundärt kopplad och inte bryter

inte strömmen från nätet. Den inbyggda nätdelen är därför

ansluten till elnätet så länge stickproppen sitter i vägguttaget.

SF

Luokan 1 laserlaite

Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa

mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1

ylittävälle näkymättömälle lasersäteilylle.

Oikeus muutoksiin varataan. Laite ei saa olla alttiina tippu-ja

roiskevedelle.

Toiminnanvalitsin on kytketty toisiopuolelle, eikä se kytke

laitetta irti sähköverkosta. Sisäänrakennettu verkko-osa on

kytkettynä sähköverkkoon aina silloin, kun pistoke on

pistorasiassa.

■ For U.K. customers

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, it should be cut off and an

appropriate 3 pin plug fitted. For details, refer to the instructions

described below.

The plug severed from the mains lead must be destroyed, as a

plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

■ Special Instructions for U.K. Model

VARO!

AVATTAESSA JA SUOJALUKITUS OHITETTAESSA

OLET ALTTIINA NÄKYMÄTTÖMÄLLE

LASERSÄTEILYLLE.

ÄLÄ KATSO SÄ TEESEEN.

VARNING!

OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR

ÖPPNAD OCH SPÄRREN ÄR URKOPPLAD. BETRAKTA

EJ STRÅLEN.

OBSERVERA

Apparaten kopplas inte bort från växelströmskällan (nätet) så

länge som den är ansluten till vägguttaget, även om själva

apparaten har stängts av.

ADVARSEL

Netspæendingen til dette apparat er IKKE afbrudt, sålæenge

netledningen siddr i en stikkontakt, som er t endt - også selvom

der or slukket på apparatets afbryder.

VAROITUS

Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko

laitetta verkosta.

Note

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured markings

identifying the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the

terminal which is marked with the letter N or coloured

BLACK. The wire which is coloured BROWN must be

connected to the terminal which is marked with the letter L

or coloured RED.

Make sure that neither core is connected to the earth

terminal of the three pin plug.

iii En

1 To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install this sound system in a well ventilated, cool, dry,

clean place - away from direct sunlight, heat sources,

vibration, dust, moisture, and/or cold. For proper

ventilation, allow the following minimum clearances.

Top: 10 cm

Rear: 10 cm

Sides: 10 cm

3 Locate this unit away from other electrical appliances,

motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes

from cold to hot, and do not locate this unit in an

environment with high humidity (i.e. a room with a

humidifier) to prevent condensation inside this unit,

which may cause an electrical shock, fire, damage to this

unit, and/or personal injury.

5 Avoid installing this unit where foreign object may fall

onto this unit and/or this unit may be exposed to liquid

dripping or splashing. On the top of this unit, do not

place:

– Other components, as they may cause damage and/or

discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire,

damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall and

liquid may cause electrical shock to the user and/or

damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If the

temperature inside this unit rises, it may cause fire,

damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may overheat,

possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet,

grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using

this unit with a higher voltage than specified is dangerous

and may cause fire, damage to this unit, and/or personal

injury. Yamaha will not be held responsible for any

damage resulting from use of this unit with a voltage

other than specified.

13 To prevent damage by lightning, keep the power cable

and outdoor antennas disconnected from a wall outlet or

this unit during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact

qualified Yamaha service personnel when any service is

needed. The cabinet should never be opened for any

reasons.

15 When not planning to use this unit for long periods of

time (i.e. vacation), disconnect the AC power plug from

the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section on

common operating errors before concluding that this unit

is faulty.

17 Before moving this unit, press to set this unit to the

standby mode, and disconnect the AC power plug from

the wall outlet.

18 Condensation will form when the surrounding

temperature changes suddenly. Disconnect the power

cable from the outlet, then leave this unit alone.

19 When using this unit for a long time, this unit may

become warm. Turn the power off, then leave this unit

alone for cooling.

20 Install this unit near the AC outlet and where the AC

power plug can be reached easily.

21 The batteries shall not be exposed to excessive heat such

as sunshine, fire or the like.

22 Excessive sound pressure from earphones and

headphones can cause hearing loss.

LASER SAFETY

This unit employs a laser. Due to possible eye injury, only a qualified

service person should remove the cover or attempt to service this

device.

DANGER

This unit emits visible laser radiation when open. Avoid direct eye

exposure to beam. When this unit is plugged into the wall outlet, do

not place your eyes close to the opening of the disc tray and other

openings to look into inside.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

This unit is not disconnected from the AC power source as long as

it is connected to the wall outlet, even if this unit itself is turned off

by . This state is called the standby mode. In this state, this unit is

designed to consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

WARNING

DO NOT TOUCH THIS UNIT WHEN IT IS USED

CONTINUOUSLY AT HIGH VOLUME BECAUSE THE

BOTTOM OF THIS UNIT MAY BECOME HOT. IT MAY LEAD

TO INJURIES SUCH AS BURNS, ETC.

1 En

INTRODUCTION PREPARATIONS

English

OPERATIONS SETTINGS

ADDITIONAL

INFORMATION

WHAT YOU CAN DO WITH THIS UNIT ......... 2

SUPPLIED PARTS ................................................ 2

ABOUT DISCS AND FILES................................. 3

Types of discs/files that can be used with this unit ... 3

Loading a disc............................................................ 4

Disc precautions......................................................... 4

Notice for watching 3D video images ....................... 4

FRONT PANEL AND BASIC OPERATION ..... 5

REMOTE CONTROL ........................................... 6

Installing the batteries in the remote control ............. 9

Using the remote control ........................................... 9

CONNECTION..................................................... 10

Connecting component system to this unit.............. 10

Other connection...................................................... 11

Connecting to a TV.................................................. 12

HDMI connection .................................................... 12

Video connection ..................................................... 12

NETWORK AND USB CONNECTION............ 13

Connecting to the NETWORK terminal.................. 13

Connecting to the USB port..................................... 13

INITIAL WIZARD/EASY SETUP..................... 14

Setting with the Initial Wizard/Easy Setup.............. 14

BASIC OPERATION........................................... 15

Basic operation using HOME/MEDIA menu.......... 15

Playing back photo/music/video.............................. 16

Using network content............................................. 18

Playing videos from YouTube™............................. 18

Basic operation without HOME/MEDIA menu ...... 19

Operation for iPod ................................................... 20

Operation for CDs.................................................... 20

ADVANCED PLAYBACK OPERATION......... 21

On Screen menu....................................................... 21

Status menu.............................................................. 22

Using Bookmark...................................................... 23

Program play............................................................ 23

Using search............................................................. 23

Enjoying BONUSVIEW™ and BD-Live™............ 24

LISTENING TO FM RADIO STATIONS ........ 25

Tuning to radio stations ........................................... 25

Presetting radio stations........................................... 25

Selecting preset radio stations (Preset tuning)......... 25

Displaying Radio Data System information ............ 26

Using the TP (traffic program) data service ............ 26

USING USEFUL FUNCTIONS .......................... 27

Using option menu on the front panel display......... 27

Setting the clock/timer and sleep timer ................... 28

Operating this unit by TV remote control

(the HDMI control function) ............................... 29

SETUP MENU.......................................................31

Operation for SETUP menu .................................... 33

General Setting ........................................................ 34

Display Setting ........................................................ 36

Audio Setting........................................................... 38

About the video output formats ............................... 39

SOFTWARE UPGRADE .....................................40

Upgrading the software............................................ 40

TROUBLESHOOTING .......................................41

General..................................................................... 41

Radio reception........................................................ 42

iPod.......................................................................... 43

USB ......................................................................... 44

Disc playback .......................................................... 44

Remote control ........................................................ 46

Network ................................................................... 46

Messages on the screen............................................ 47

Others....................................................................... 47

GLOSSARY...........................................................48

SPECIFICATIONS...............................................50

CONTENTS

INTRODUCTION

PREPARATIONS

OPERATIONS

SETTINGS

ADDITIONAL INFORMATION

■ About this manual

• This manual describes how to operate this unit using a

remote control except when it is not available. Some of

these operations are also available using the front panel

buttons.

• Notes contain important information about safety and

operating instructions. y indicates a tip for your

operation.

• “iPod” described in this manual may also refer to

“iPhone” or “iPad”.

• This manual is printed prior to production. Design and

specifications are subject to change in part as a result of

improvements, etc. In case of differences between the

manual and the product, the product has priority.

The icons used in this manual

Icons are used to indicate available buttons/functions for a

particular format.

: BD-Video

: DVD-Video, DVD-VR, DVD+VR

: Audio CD

: AVCHD, WMV

: MP3, WMA, WAV

: JPEG

BD

DVD

CD

VIDEO

MUSIC

PHOTO

2 En

INTRODUCTION

*1 For details on playable discs and files, refer to page 3.

*2 Network setting is needed to use this function.

Make sure you have all of the following items.

WHAT YOU CAN DO WITH THIS UNIT

Play back a commercially-released Blu-ray Disc™/DVD/CD

*1

\ p. 21

In addition to a Blu-ray Disc™ (BD disc), this unit also supports playback of a variety of other

discs.

Play back BONUSVIEW™, BD-Live™, etc.

*1

\ p. 24

You can enjoy additional movies on the latest BD discs.

Play back Video, Music, Photo files on a disc/USB memory device/

iPod/iPhone/iPad

*1

\ p. 15

Files recorded on discs/USB memory devices/iPod/iPhone/iPad can be played back with this

unit.

Play back Video, Music, Photo files on a Home Network Server

*1,2

\ p. 18

PC contents can be played back with TV by connecting this unit to a network server.

Play back YouTube™ contents on the Internet

*2

\ p. 18

You can instantly enjoy YouTube™ contents on the Internet with this unit.

Receive FM Radio stations and Radio Data System information \ p. 25

You can enjoy listening to FM radio stations with this unit. Also when the Radio Data System

broadcasting station is received, you can display Radio Data system information on the front

panel display of the unit.

Perform the Initial Wizard/Easy Setup \ p. 14

You can easily set for language, resolution, screen aspect ratio with the Initial Wizard/Easy

Setup screen.

Operate with the TV remote control \ p. 29

Connecting devices with an HDMI cable, you can control devices with a single remote control

using the HDMI control function.

Play back high-quality virtual surround sounds by AIR

SURROUND XTREME

\ p. 16

You can enjoy Yamaha’s exclusive AIR SURROUND XTREME that reproduces high-quality

virtual surround sounds.

SUPPLIED PARTS

Batteries (×2)

(AAA, R03, UM-4)

Remote control Indoor FM antenna

*3

Composite video

cable (1.5m)

*

3

The supplied indoor FM antenna differs depending on your model.

3 En

INTRODUCTION

English

• 12 cm and 8 cm discs can be played back in this unit.

Do not use an 8 cm to 12 cm adapter.

• Use discs that conform to compatible standards as

indicated by the presence of official logos on the disc

label. Playback of discs not complying with these

standards is not guaranteed. In addition, the image

quality or sound quality is not guaranteed even if the

discs can be played back.

• BD/DVD video players and discs have region codes,

which dictate the regions in which a disc can be played.

• BD/DVD Video operations and functions may be

different from the explanations in this manual and some

operations may be prohibited due to disc

manufacturer’s settings.

• If a menu screen or operating instructions are displayed

during playback of a disc, follow the operating

procedure displayed.

• Playback for some of the discs in the left side column tables

may not be possible depending on the disc.

• Finalize all recording media that is played back in this unit.

• “Finalize” refers to a recorder processing a recorded disc so that

it will play in other players/recorders as well as this unit. Only

finalized discs will play back in this unit. (This unit does not

have a function to finalize discs.)

• Playback of all files on the disc, USB memory device and

network is not guaranteed.

• A copyright protected file cannot be played back via a USB

memory device and network.

MP3/WMA audio file requirement

• Sampling frequency: within 32 - 48 kHz (MP3/WMA),

LPCM 44.1 kHz/16 bit/Stereo (WAV)

• Bitrate: within 8 - 320 kbps (MP3), 32 - 192 kbps

(WMA)

WMV file requirement

• WMV9, maximum resolution is 1,920 × 1,080.

ABOUT DISCS AND FILES

Types of discs/files that can be

used with this unit

Disc Type

Recording

Format

Data Format

BD-ROM/BD-R/

BD-RE

BD-Video --

DVD-ROM DVD-Video --

DVD-R/DVD-R DL/

DVD-RW

DVD-Video/DVD-

VR/AVCHD/Data

Disc

WMV/MP3/WAV/

WMA/JPEG

DVD+R/DVD+R

DL/DVD+RW

DVD-Video/

DVD+VR/AVCHD/

Data Disc

WMV/MP3/WAV/

WMA/JPEG

CD-ROM CDDA/HDCD --

CD-R/CD-RW CDDA/Data Disc WMV/MP3/WAV/

WMA/JPEG

USB -- WMV/MP3/WAV/

WMA/JPEG

Network -- WMV/MP3/WMA/

WAV/JPEG

Region management information

Destination BD-Video DVD-Video

Asia Region code “A” or

“ALL”

Region number “3”

or “ALL”

Central and South

America

Region code “A” or

“ALL”

Region number “4”

or “ALL”

Korea Region code “A” or

“ALL”

Region number “3”

or “ALL”

3

ALL

4

ALL

3

ALL

Europe Region code “B” or

“ALL”

Region number “2”

or “ALL”

Australia Region code “B” or

“ALL”

Region number “4”

or “ALL”

Russia Region code “C” or

“ALL”

Region number “5”

or “ALL”

China Region code “C” or

“ALL”

Region number “6”

or “ALL”

Notes

Region management information

Destination BD-Video DVD-Video

2

ALL

4

ALL

5

ALL

ABOUT DISCS AND FILES

4 En

• Insert the disc with the label facing up.

• In case of the disc recorded on both sides, face down the

side you want to play back.

• Playback may begin automatically, depending on the disc and

setting of this unit.

• The menu may be displayed first, depending on the disc.

• The disc load time may vary depending on the disc.

• Do not touch the surface of the

disc. Hold a disc by its edge

(and the center hole).

• Do not use a pencil or pointed

marker to write on the disc.

• Do not put a tape, seal, glue, etc., on a disc.

• Do not use a protective cover to prevent scratches.

• Do not load more than one disc into this unit at one

time. This can cause damage to both this unit and the

discs.

• Do not insert any foreign objects into the disc slot.

• Do not load a cracked, warped, or glued disc.

• Do not expose a disc to

direct sunlight, high

temperature, high

humidity, or a lot of dust.

• If a disc becomes dirty,

wipe it with a clean, dry

cloth from the center out

to the edge. Do not use

record cleaner or paint

thinner.

• To avoid malfunction, do

not use a commercially

available lens cleaner.

• Some people may experience discomfort (such as eye

strain, fatigue, or nausea) while watching 3D video

images. We recommend that all viewers take regular

breaks while watching 3D video images.

• If you experience any discomfort, stop watching the 3D

video images until the discomfort subsides. Consult a

doctor if you experience severe discomfort.

• Read the owner’s manuals (BD disc and TV) and/or the

caution messages that appear on the TV carefully.

• The vision of young children (especially those under six

years old) is still under development. Consult your

doctor (such as a pediatrician or eye doctor) before

allowing young children to watch 3D video images.

• Adults should supervise young children to ensure they

follow the recommendations described above.

Loading a disc

Notes

Disc precautions

Caution

Notice for watching 3D video

images

5 En

INTRODUCTION

English

y

This unit has an automatic standby function.

• When the source is set to Disc/USB/Network, this unit automatically switches to standby mode if it is left turned on for 1 hour without

playback or any other operation being performed.

• When the source is NOT set to Disc/USB/Network, this unit automatically switches to standby mode if it is left turned on for between

1 to 8 hours without playback or any other operation being performed according to the setting in SETUP menu (p. 34).

FRONT PANEL AND BASIC OPERATION

iPod iPhone iPod

USBPHONES

INPUT

PRESET

TIMER

TP

VOLUME

(on/standby):

Turns this unit on/

Sets to standby mode.

:

Opens/Closes the

disc tray.

:

Starts/Pauses

playback.

:

Stops playback.

INPUT:

Selects an input source.

VOLUME

USB port:

(p. 11, 13)

PHONES:

Connecting headphones

No sound is output from the speakers

when headphones are connected.

Disc tray

/

:

Skips backward and forward/Press

and hold to rewind and fast-forward.

PRESET < >:

Selects a preset station.

Front panel display:

(p. 27)

Down Up

TP indicator:

(p. 26)

TIMER indicator:

(p. 28, 29)

6 En

will appear on the top left corner of the screen when the

pressed button is not available.

1 Infrared signal transmitter (p. 9)

2 MARKER : Sets Bookmark at a specified

point of a movie (p. 23). After Bookmark is set, press

DIGEST to select the set point you want to jump to. You can

set up to 12 Bookmarks.

3 : Opens/Closes the disc tray.

4 PROGRAM : Sets the order of playback

(p. 23). You can set up to 15 tracks of an audio disc or titles/

chapters of a DVD-Video disc.

5 Numeric buttons: Enters numbers, or during playback,

jumps to the track/chapter corresponding to the number you

input. These buttons may not be available depending on the

disc type and playback condition.

6 CLEAR: Clears entered number/set item.

7 DISPLAY: Switches the information shown on the front

panel display (p. 20, 26).

8 SETUP: Displays SETUP menu screen (p. 31).

9 OPTION: Enters option menu mode (p. 27).

0 HOME: Displays HOME menu screen (p. 16).

A STATUS: Displays the playback information on the screen

(p. 22).

B DIMMER: Changes brightness of the front panel display.

Choose brightness between bright or dim by pressing this

button repeatedly.

C SUBTITLE : Changes subtitle

languages (p. 49) if available. You can also select this item

from On Screen menu (p. 21).

D PIP : Turns on/off the Picture in Picture (p. 24). PIP

Mark ( ) is displayed on the screen when this function is

available. You can also select this item from On Screen menu

(p. 21).

PIP Mark is displayed only when [PIP Mark] is set to [On]

(p. 35).

E REPEAT

: Selects repeat mode. Repeat mode shown below

will change each time you press the button (p. 20, 22).

: Repeats the title being played back.

: Repeats the chapter being played back.

: Repeats the folder being played back.

: Repeats all tracks/files on the disc/folder.

: Repeats the track/file being played back.

F SHUFFLE :

Selects shuffle play mode (p. 20, 21).

G DIGEST : Shows 12 photo thumbnails. When

thumbnails are displayed, you can proceed to the next/

previous page with / .

: Displays Bookmark select bar (p. 23).

H : Turns this unit on or sets it to standby mode.

REMOTE CONTROL

Note

PROGRAM MARKER DIGEST ZOOM

SLEEP

TIMER

SURROUND

MUTESEARCHCLEAR

iPod

DISC

USB NET

TV AUX

TUNER

PIP

SUBTITLE

AUDIO

MEMORY

VOLUME

SETUP

DISPLAY

HOME

OPTION

ENTER

TOP MENU

RETURN ON SCREEN

SHUFFLE

REPEAT

DIMMER

STATUS

TUNING

PRESET

A B TP

POP-UP MENU

O

P

Q

R

S

L

M

N

G

0

A

D

C

B

E

F

7

6

5

4

3

8

9

2

1

K

H

I

J

Note

DVD VIDEO

DVD CD

BD DVD VIDEO

BD

BD DVD CD VIDEO MUSIC

PHOTO

DVD CD VIDEO MUSIC PHOTO

PHOTO

DVD VIDEO

REMOTE CONTROL

7 En

INTRODUCTION

English

I ZOOM : Zooms in/out. The

size of the screen will change each time you press the button

(zoom in/out: 3 steps each).

J Color buttons : Use these buttons according to on-

screen instructions.

K SLEEP: Sets to sleep mode (p. 29).

L TIMER: Sets to timer mode (p. 28).

M SURROUND: Turns on/off surround playback mode for the

speakers (p. 16). (Does not affect headphone sound.)

N Volume control buttons: Controls the volume level

(p. 16).

Press MUTE to turn off the volume. Press again to resume

the volume.

O SEARCH : Jumps

to a specified point during playback. For details on this

function, refer to “Using search” (p. 23). You can also select

this item from Status menu (p. 22).

P AUDIO : Changes the audio language or

format. You can also select from On Screen menu (p. 21).

Q FM control buttons

TUNING << / >>: Starts manual tuning. Press and hold to

start automatic tuning (p. 25).

PRESET < / >: Selects preset station (p. 25).

MEMORY: Starts preset tuning and stores preset stations

(p. 25).

TP: Enters TP (Traffic Program) data service receiving mode

(p. 26).

R A/B : Plays back a

specific part you want to repeat.

1 Press A/B at the scene where you want to set the start

point. [A-] is displayed on the screen.

2 Press A/B again at the scene where you want to set the end

point. [A-B] is displayed on the screen.

Repeat playback starts.

3 To cancel the repeat playback, press A/B. [A-B]

disappears and the repeat playback is finished.

This function cannot be performed depending on the

specifications of the disc.

S Input select buttons: Selects the input source (p. 15, 19,

25).

Note

DVD VIDEO PHOTO

BD

BD DVD CD VIDEO MUSIC

BD DVD

BD DVD CD VIDEO MUSIC

Continued to the next page.

\

REMOTE CONTROL

8 En

T TOP MENU : Displays the top menu screen

(p. 49) if the disc contains a menu. Select the desired item

using 5 /a /2 /3 and ENTER.

Specific operations may be different depending on the disc.

Follow the instructions of each menu screen.

U Cursor buttons (5/a /2/3): Moves to select the focused

item.

ENTER: Confirms the focused menu/item.

V RETURN: Returns to the previous menu or screen, etc.

W POP-UP/MENU : Displays pop-up menu. The

menu contents displayed vary depending on the disc. For

details on how to see and operate the pop-up menu, refer to

the manual for the disc. The top menu screen may be

displayed by pressing POP-UP/MENU depending on the

disc.

X ON SCREEN: Displays On Screen menu (p. 21).

Y Control buttons

:

: Plays back contents.

: Stops playback. To stop playback completely, press this

button twice.

: Pauses playback.

:

/ : Skips backward/forward.

/ : Press for instant search/replay. Instant search

skips the content 30 seconds. Instant replay replays the

content from 10 seconds before.

:

/ : Searches backward/forward. The search speed

will change each time you press the button (search backward/

forward: 5 steps each). Press to resume normal playback.

:

/ : Changes the speed of a slide show (slower/

faster: 3 steps).

Depending on the disc, this unit resumes playback from the

point where the unit was previously stopped. To play back

from the beginning, press and then press .

PROGRAM MARKER DIGEST ZOOM

SLEEP

TIMER

SURROUND

MUTESEARCHCLEAR

iPod

DISC

USB NET

TV AUX

TUNER

PIP

SUBTITLE

AUDIO

MEMORY

VOLUME

SETUP

DISPLAY

HOME

OPTION

ENTER

TOP MENU

RETURN ON SCREEN

SHUFFLE

REPEAT

DIMMER

STATUS

TUNING

PRESET

A B TP

POP-UP MENU

W

X

Y

t

V

U

Note

BD DVD

BD DVD CD VIDEO MUSIC PHOTO

BD DVD CD VIDEO MUSIC

PHOTO

REMOTE CONTROL

9 En

INTRODUCTION

English

■ Notes on batteries

• Change both batteries when the operation range of the remote

control decreases.

• Use AAA, R03, UM-4 batteries.

• Make sure that the polarities are correct. Refer to the illustration

inside the battery compartment.

• Remove the batteries if the remote control is not to be used for

an extended period of time.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as alkaline and

manganese batteries) together. Read the packaging carefully as

these different types of batteries may have the same shape and

color.

• If the batteries have leaked, dispose of them immediately.

Avoid touching the leaked material or letting it come into

contact with clothing, etc. Clean the battery compartment

thoroughly before installing new batteries.

• Do not throw away batteries with general house waste; dispose

of them correctly in accordance with your local regulations.

• Keep batteries away from children. If a battery is accidentally

swallowed, contact your doctor immediately.

• When not planning to use the remote control for long periods of

time, remove the batteries from the remote control.

• Do not charge or disassemble the supplied batteries.

The remote control transmits a directional infrared beam.

Be sure to aim the remote control directly at the remote

control sensor on the front panel of this unit during

operation.

• The area between the remote control and this unit must be clear

of large obstacles.

• Do not spill water or other liquids on this remote control.

• Do not drop the remote control.

• Do not leave or store the remote control in the following types

of conditions:

– high humidity, such as near a bath

– high temperature, such as near a heater or a stove

– extremely low temperatures

– dusty places.

• Do not expose the remote control sensor to strong lighting, in

particular, an inverter type fluorescent lamp; otherwise, the

remote control may not work properly. If necessary, position

the system away from direct lighting.

Installing the batteries in the

remote control

1

3

2

Using the remote control

Notes

iPod iPhone iPod

USBPHONES

INPUT

PRESET

TIMER

TP

VOLUME

30˚ 30˚

Within 6 m

(20 feet)

10 En

PREPARATIONS

Make sure you read the following procedure and note carefully before connecting the system.

■ Connecting the system

1 Connect the speaker terminals (L) of this unit to the speaker terminals of the left speaker and the speaker terminals

(R) of this unit to the speaker terminals of the right speaker using the speaker cables supplied with the speaker set

(NS-BP150).

2 Connect the supplied FM antenna to the FM jack.

CONNECTION

Connecting component system to this unit

AUDIO IN

SUBWOOFER

AUX OUTPUT

ANTENNA

VIDEO

R

L

NETWORK

USB

HDMI

L

FM

75Ω

6Ω MIN. /SPEAKER

SPEAKERS

MD player etc.

Subwoofer

Right speaker

(NS-BP150)

Left speaker

(NS-BP150)

This unit (BRX-750)

RCA stereo

cable

Be sure to remove insulation from

the end of each speaker cable.

Video connection (p. 12)

HDMI connection (p. 12)

USB connection (p. 13) Network connection (p. 13)

CONNECTION

11 En

PREPARATIONS

English

• Do not connect this unit or other components to the main power

until all connections between components are complete.

• Do not let the bare speaker wires touch each other or any metal

part of this unit. This could damage the unit and/or the speakers.

• All connections must be correct: L (left) to L, R (right) to R,

“+” to “+” and “–” to “–”. If the connections are faulty, no

sound will be heard from the speakers, and if the polarity of the

speaker connections is incorrect, the sound will be unnatural

and lack bass. Also, refer to the owner’s manual for each of

your components.

• When connecting speakers other than NS-BP150, use speakers

having more than 6Ω impedance.

• If there is a problem of weak radio wave reception in your area

or you want to improve radio reception, we recommend that

you use commercially available outdoor antennas. For details,

consult the nearest authorized Yamaha dealer or service center.

■ Connecting iPod

You can enjoy music stored in your iPod by connecting it

to this unit.

This unit is compatible with iPod classic, iPod nano (2nd, 3rd,

4th, 5th and 6th generation), iPod touch (1st, 2nd, 3rd, and 4th

generation), iPhone, iPhone 3G/3GS, iPhone 4, and iPad.

• Make sure the USB cable is connected securely between

your iPod and this unit.

• Connect your iPod to the front USB port of this unit. The

rear USB port is not compatible with your iPod.

■ Connecting the power cable

After you made all connections, connect the power cables

of this unit.

CAUTION

Notes

Other connection

Note

Notes

iPod iPhone iPod

USB

USB port

AUDIO IN

SUBWOOFER

AUX

MAINS

OUTPUT

ANTENNA

VIDEO

R

L

NETWORK

USB

HDMI

L

FM

75Ω

6Ω MIN. /SPEAKER

SPEAKERS

To an AC

wall outlet

CONNECTION

12 En

Make sure you refer the following illustration carefully so that connections between this unit and your TV are properly

made.

Do not connect the power cable of this unit until all connections are completed.

• You can enjoy high quality digital picture and sound

through the HDMI terminals.

• Firmly connect an HDMI cable (commercially

available) to the HDMI terminal of this unit.

• Use HIGH SPEED HDMI cables that have the HDMI

logo (p. 51).

y

• When you use the HDMI control function, refer to “Operating

this unit by TV remote control (the HDMI control function)”

(p. 29) and “[HDMI Control]” (p. 34).

• For information on the output mode of the HDMI terminal,

refer to “[HDMI]” (p. 38).

• When no picture is displayed, refer to

“TROUBLESHOOTING” (p. 41).

■ Connection for the playback of Blu-ray

3D discs

You need the following equipment and connections to

enjoy BD 3D discs on this unit:

– a TV that has 3D functionality.

– a TV and this unit must be connected with HDMI

cables.

– a BD disc should contain 3D images.

■ About audio return channel (ARC)

supported TV

• You can connect an HDMI cable to the audio return

channel supported terminal (the terminal with “ARC”

indicated) on the TV.

• You need to activate the HDMI control function of this

unit so as to activate audio return channel (ARC) (

p. 34).

What is audio return channel (ARC)?

This function allows digital audio signal to be output from

a TV to this unit through an HDMI cable, without using a

digital audio pin cable.

y

If your TV is not ARC supported, connect the TV and this unit

via the AUX jacks on the unit.

• Firmly connect the composite video cable (supplied) to

the VIDEO jack.

• Refer to page 39 for information on the video output

formats.

• If you play back the image via VCR, the image may deteriorate

due to the copy guard function.

• To enjoy BD 3D discs on this unit, you need to connect a TV

and this unit using HDMI cables (commercially available).

Connecting to a TV

CAUTION

AUDIO IN

SUBWOOFER

AUX OUTPUT

ANTENNA

VIDEO

R

L

NETWORK

USB

HDMI

L

FM

75Ω

6Ω MIN. /SPEAKER

SPEAKERS

VIDEO

AV INPUT

1 2 3

HDMI IN

(ARC)

This unit

Video cable

(supplied)

TV

HDMI cable

(commercially available)

HDMI connection

Video connection

Notes

13 En

PREPARATIONS

English

• PC contents can be played back by connecting this unit to the network.

• You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD-Live

compatible discs. Refer to page 24 for information on BD-Live functions.

• Firmly connect a network cable (commercially available) to the NETWORK terminal.

• Use only an STP (shielded twisted pair) network cable.

• When using the internet, a broadband internet connection as shown below is required.

• Connect the other connector of the network cable to the hub/broadband router.

• When using a broadband internet connection, a contract with an internet service provider is required. For more details, contact your

nearest internet service provider.

• Refer to the operation manual of the equipment you have as the connected equipment and connection method may differ depending on

your internet environment.

• Use a network cable/router supporting 10BASE-T/100BASE-TX.

• You can connect a USB memory device (2 GB or

greater and formatted with FAT 32/16) for BD Local

Storage to the USB port on the rear panel (or front

panel) of this unit to save the BD-Live data (p. 24) or to

upgrade the software of this unit (p. 40).

• Firmly connect a USB memory device (commercially

available) to the USB port.

• Do not remove the USB memory device or unplug the power

cable while the operations for BD-Live or software upgrade are

being performed.

• Do not use a USB extension cable when connecting a USB

memory device to the USB port of this unit. Using a USB

extension cable may prevent the unit from performing correctly.

• Yamaha cannot guarantee that all brands’ USB memory devices

will operate with this unit.

• For more notes on using USB memory devices, refer to

page 15.

■ After connecting

• When you set the Network setting manually, refer to “Network” (p. 35).

• To play back the PC contents on your network, refer to “Using network content” (p. 18).

NETWORK AND USB CONNECTION

Connecting to the NETWORK terminal

Notes

Connecting to the USB port

CAUTION

Notes

AUDIO IN

SUBWOOFER

AUX OUTPUT

ANTENNA

VIDEO

R

L

NETWORK

USB

HDMI

L

FM

75Ω

6Ω MIN. /SPEAKER

SPEAKERS

LAN

This unit

To NETWORK

terminal

Internet

Modem

Network cable

(commercially

available)

Hub or

broadband router

PC

To USB

port

USB memory

device

(commercially

available)

To LAN

terminal

y

To save BD-Live data on the USB

memory device on the front

panel, set [Local Storage] to

[Front USB] (p. 34).

14 En

OPERATIONS

Initial Wizard/Easy Setup allows you to set language,

resolution, and screen aspect ratio easily. Initial Wizard

screen is displayed when you turn this unit on for the first

time after purchase or upgrade. Same setting can be

performed from SETUP menu = [System] = [Easy

Setup] (p. 31).

1 When Easy Setup screen is displayed, press ENTER

to start Easy Setup.

2 Press 5/a to select the language you want to display

on the screen, then press ENTER.

3 Press 5/a to select the resolution, then press

ENTER. For details on setting items, refer to “[Video

Out Select]” (p. 36).

When you connect your TV and this unit via the VIDEO

jack, select [Composite].

4 Press 5/a to select the screen aspect ratio, then

press ENTER. For details on setting items, refer to

“[TV Screen]” (p. 36).

Easy Setup is completed.

5 Press ENTER to exit Easy Setup.

• When no picture is displayed after Initial Wizard/Easy Setup is

completed, refer to “TROUBLESHOOTING” (p. 41).

• A warning message concerning 3D video playback appears

when this unit is turned on. Press ENTER to dismiss the

message or CLEAR to disable it (p. 34).

INITIAL WIZARD/EASY SETUP

Setting with the Initial Wizard/Easy

Setup

Note

Notes

15 En

English

OPERATIONS

y

When the source is a CD/iPod/FM/TV, refer to “Basic operation without HOME/MEDIA menu” (p. 19). When the source is a BD/

DVD/USB/Network, read the following (a CD can also be played back with HOME/MEDIA menu).

Follow the procedures below to play back the source.

*

1

· Some devices may not work properly even if they meet the requirements.

· Playability of and power supply to all kind of USB devices are not guaranteed.

· The reading time may exceed 30 seconds depending on the number of files/folders.

· Yamaha and suppliers accept no liability for the loss of data saved on the USB devices connected to this unit.

As a precaution, it is recommended that the files are made backup copies.

BASIC OPERATION

Basic operation using HOME/MEDIA menu

Set the source

Switch the

input

Refer to the following pages for more

operations

Disc

USB

*1

Network

(PC contents

and

YouTube)

1

2 3

p. 16

VOLUME

SETUP

DISPLAY

HOME

OPTION

ENTER

TOP MENU

RETURN ON SCREEN

POP-UP MENU

DIMMER

STATUS

TUNING

PRESET

iPod iPhone iPod

USB

NETWORK

USB

p. 13, 16

Front Rear

p. 13, 18

BASIC OPERATION

16 En

■ Controlling the volume level

1 Press the Volume control buttons (+/–) on the

remote control to increase/decrease the volume level

(p. 7).

■ Turning on/off surround playback mode

1 Press SURROUND to turn on/off surround playback

mode (p. 7).

When it is set to on:

– plays back surround sounds using Yamaha’s

exclusive AIR SURROUND XTREME (p. 48) if

the sources is a surround playback source such as

a BD.

– reproduces wider stereo sounds if the source is a

stereo playback source such as an audio CD.

HOME and MEDIA menus allow you to browse and play

multi-media files on data discs, USB memory devices and

your network.

For details on playable discs and files, refer to page 3.

■ Basic operation

5/a : Moves the focus.

2: Returns to the parent folder.

HOME: Moves to/exits HOME menu screen.

ENTER: Confirms the folder/file.

■ Icons on the top of MEDIA menu

: Plays back the disc on the tray, or displays

contents in the data disc.

: Displays contents in the USB memory device

connected to the USB port.

: Searches for a DLNA (p. 18) server on the

network.

: Displays contents on the connected DLNA server.

■ Common operations for playing back

files in a selected folder

Example: Selecting a movie file on a USB memory

device

Stop the playback of the video before you move to MEDIA menu

screen.

1 Press HOME to move to HOME menu screen.

y

HOME menu screen may differ depending on the model.

2 Press 2/3/5 to select [MEDIA], then press

ENTER.

MEDIA screen appears.

3 Select the item which contains the file you want to

play back, then press ENTER.

Playing back photo/music/video

Note

VOLUME

SETUP

DISPLAY

HOME

OPTION

ENTER

TOP MENU

RETURN ON SCREEN

POP- UP MENU

HOME

ENTER

2

5

a

Note

La page charge ...

Yamaha PianoCraft MCR-750 Le manuel du propriétaire

Ce manuel convient également à

Yamaha PianoCraft MCR-750 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents