Tineco CARPET ONE PRO SERIES Smart Carpet Cleaner Manuel utilisateur

CARPET ONE PRO SERIES

Smart Carpet Cleaner

Instruction Manual

Manual De Uso

Mode D’emploi

*Actual product may differ from illustration.

TINECO IS HERE TO HELP.

We’ll get back to you within 1 business day.

www.tineco.com

1-855-292-8864

Mon. - Fri. 9am - 6pm (CST)

EN

1

CONTENTS

Important Safety Instructions ...............................................................2

Specications ........................................................................................6

Overview ................................................................................................7

Accessories............................................................................................8

Assembly ...............................................................................................9

Operation ............................................................................................12

Maintenance .......................................................................................17

Troubleshooting ..................................................................................21

Warranty ..............................................................................................22

TINECO IS HERE TO HELP.

We’ll get back to you within 1 business day.

www.tineco.com

1-855-292-8864

Mon. - Fri. 9am - 6pm (CST)

EN

2

Important Safety Instructions

SAVE THESE INSTRUCTIONS

Household use only.

When using an electrical appliance, basic precautions should always be followed, including

the following:

READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE). Failure to follow the

warnings and instructions may result in electric shock, re and/or serious injury.

WARNING – To reduce the risk of re, electric shock, or injury:

1. This appliance can be used by children aged from 8 years and above and persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge

if they have been given supervision or instruction concerning use of the appliance in

a safe way and understand the hazards involved. Children should not play with the

appliance. Cleaning and user maintenance shall not be performed by children without

supervision.

2. The appliance is not to be used by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have

been given supervision or instruction.

3. Use only indoors, do not immerse. To reduce risk of electric shock – Use only on carpet

moistened by cleaning process.

4. Do not allow to be used as a toy. Close attention is necessary when used by or near

children, pets or plants.

5. To reduce the risk of re and electric shock – Use only Tineco cleaning products

intended for use with this machine.

6. Use only as described in this manual. Use only manufacturer’s recommended

attachments.

7. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord

around sharp edges or corners. Do not run appliance over cord. Keep cord away from

heated surfaces.

8. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

9. Do not handle plug or appliance with wet hands.

10. Do not use with a damaged cord or plug. If appliance has been dropped, damaged,

left outdoors, dropped into water, or is not working as it should, return it to a service

center.

11. Do not put any object into openings. Do not use with any opening blocked; keep free

of dust, lint, hair, and anything that may reduce air ow.

12. Keep hair, loose clothing, ngers, and all parts of your body away from openings and

moving parts.

13. Use extra care when cleaning on stairs.

14. Do not use to pick up ammable or combustible liquids, such as gasoline, or use in

areas where they may be present.

15. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot

ashes.

EN

3

16. Do not use without lter.

17. To reduce the risk of electric shock, always install oat before any wet pick-up

operation.

18. Prevent unintentional activation. Ensure the switch is in the off-position before picking

up or carrying the appliance. Carrying the appliance with your nger on the switch or

energizing appliance that have the switch on invites accidents.

19. Always switch off the appliance before making any adjustments, changing accessories,

or storing the appliance. Such preventive safety measures reduce the risk of starting the

appliance accidentally.

20. TO REDUCE THE RISK OF ELECTRIC SHOCK – UNPLUG BEFORE CLEANING OR

SERVICING. UNPLUG BEFORE CONNECTING HOSE.

21. Always turn off this appliance before connecting or disconnecting the motorized

nozzle.

22. Turn off all controls before unplugging.

23. Do not leave appliance when plugged in. Unplug from outlet when not in use and

before servicing.

24. Do not use to pick up ultrane particles, such as lime, cement, sawdust, gypsum

powder, or ashes.

25. Do not use to pick up sharp objects, such as metallic nails, pieces of glass, metal paper

clips, or pins.

26. Do not use to pick up hazardous material and chemicals, such as solvent, drain cleaner,

strong acids, or strong alkali.

27. Stop using immediately if the appliance is overheating, making unusual noises,

producing unusual odors, performing low suction, or leaking electricity.

28. Turn cleaner OFF and disconnect from electrical outlet for long-term storage.

29. Always clean the Dirty Water Tank after each use to avoid potential blockage, which

may lead to low suction power, motor overheating, or reduce the service life of the

appliance.

30. Do not expose to rain.

31. Store appropriately indoors in a dry place after use.

32. Do not place or submerge appliance in standing water or try to clean ooded areas.

33. The plug must be removed from the socket-outlet before cleaning or maintaining the

appliance.

34. A hazard may occur if the appliance runs over the supply cord.

35. Connect to a properly grounded outlet only. See Grounding Instructions.

36. To reduce the risk of re and electric shock due to internal component damage, use

only Tineco cleaning uid/solution: Carpet Deodorizing & Cleaning Solution intended

for use with this appliance. See the Cleaning Fluid/Solution section of this manual.

37. Do not turn over nozzle, or touch the bottom surface of the nozzle when using the dry

function.

EN

4

Range of Usage

1. The Carpet cleaner is to be used on carpets, such as level loop, etc.

2. Keep your appliance away from heat sources, such as replace or heater, to avoid

casing deformation.

3. Do not use to pick up ammable or combustible liquids, ultrane particles, sharp

objects, hazardous material, chemicals or anything that is burning or smoking, as

described above.

About Cleaning Fluid/Solution

1. A large amount of cleaning solution entering into the motor may cause damage to

theappliance. Don’t shake the machine violently.

2. Add solution as instructed in the Operation section. We recommend using the

provided cleaning solution.

3. Keep out of the reach of children. Avoid contact with eyes and skin, otherwise, rinse

thoroughly with water. If irritation persist, seek medical advice. If product is swallowed

seek medical advice.

4. Dirty water and solution disposal should comply with local environmental regulations.

5. WARNING: To Reduce the Risk of Fire and Electric Shock due to internal component

damage, use only TINECO CARPET DEODORIZING & CLEANING SOLUTION

intended for use with the appliance.

About the Appliance

1. Do not modify or attempt to repair the appliance except as indicated in the instructions

for operating and cleaning.

2. Use extra care when cleaning on stairs.

3. Ensure that the Power Switch is in the OFF-position and unplug before picking up or

carrying the appliance. Do not lay at or lean the appliance so as to prevent dirty water

from entering into the motor.

4. Always install the Dirty Water Tank and Clean Water Tank properly before use.

5. Do not allow the appliance to get wet to avoid risk of re or injury caused by a short

circuit.

Grounding Instructions

1. This appliance must be grounded. If it should malfunction or breakdown, grounding

provides a path of least resistance for electric current to reduce the risk of electric

shock. This appliance is equipped with a cord having an equipment-grounding

conductor and grounding plug. The plug must be inserted into an appropriate

outlet that is properly installed and grounded in accordance with all local codes and

ordinances.

2. WARNING – Improper connection of the equipment-grounding conductor

can result in a risk of electric shock. Check with a qualied electrician or service person if

you are in doubt as to whether the outlet is properly grounded. Do not modify the plug

provided with the appliance – if it will not t the outlet, have a proper outlet installed by

a qualied electrician.

EN

5

3. This appliance is for use on a nominal 120-V circuit and has a grounding attachment

plug that looks like the plug illustrated in sketch A in Figure 20. Make sure that the

appliance is connected to an outlet having the same conguration as the plug. No

adaptor should be used with this appliance.

FCC Supplier’s Declaration of Conformity

TINECO / CARPET ONE PRO SERIES

This appliance complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This appliance may not cause harmful interference, and (2) this appliance must accept

any interference received, including interference that may cause undesired operation.

TINECO INTELLIGENT, INC.

1700 WESTLAKE AVENUE N., SUITE 200, SEATTLE, WA, 98109, USA

WWW.TINECO.COM

1-855-292-8864

Changes or modications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

Note: This equipment has been tested and nd it to comply with the limits for a Class B

digital appliance, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following

measures:

(1) Reorient or relocate the receiving antenna.

(2) Increase the separation between the equipment and receiver.

(3) Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

(4) Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance

of 20cm between the radiator and any part of your body.

Note

The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modications to this equipment, such modications could void the user’s

authority to operate this equipment.

EN

6

IC Note

This appliance contains licence-exempt transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

(1) this appliance may not cause interference.

(2) this appliance must accept any interference, including interference that may cause

undesired operation of the appliance.

- This Class B digital apparatus complies with Canadian ICES-003.

- This equipment complies with ISED RSS-102 radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with a

minimum distance of 20cm between the radiator and any part of your body.

Symbols:

Power On/Off

AUTO/MAX/DRY Mode

Specications

Product CARPET ONE PRO SERIES

Voltage 120V, 60Hz

Current 11A

CWT Capacity 2L

DWT Capacity 1.5L

• All data and technical instructions of this manual are based on results from lab tests of

Tineco or designated third parties. The company reserves all rights for nal explanations.

Disposal

Accessories and packaging should be sorted for environmental friendly recycling. Do not

put them into re, water or soil.

EN

7

A. WiFi/Mute/Language Switch Button

B. Back Carry Handle

C. Cord Wrap

D. Dirty Water Tank Release Pedal

E. Recline Pedal

F. AUTO/MAX/DRY Mode

G. Power On/Off

H. Tube

I. Digital Display

J. Clean Water Tank Handle

K. Clean Water Tank (CWT)

L. Dirty Water Tank Handle

M. Dirty Water Tank (DWT)

N. Brush Roller Cover Release Button

O. Hose Connection Port Cover

P. Brush Roller Cover

Q. Humidity Sensor

R. Carpet Deodorizing & Cleaning Solution

S. Cleaning Tool

T. 2 in 1 Nozzle

U. Sponge Filter

V. Brush Cover Scraper

W. Accessory Hose

O

Q

P

AJ

M

C

BK

ND

L

E

F

G

H

I

Overview

S

R

T

U

V

W

EN

8

Accessories

Note:

Accessories may vary between markets. If you require more accessories, please go to www.tineco.com

or store.tineco.com.

Carpet Deodorizing & Cleaning Solution

Removes dirt, grime, grease and tough stains from most types of

carpets.

Always use Tineco solution in your appliance.

Add two bottle caps of solution to each full tank of clean water.

Cleaning Tool

A full brush to clean the DWT, brush chamber and opening.

The tool also has a bristled end to remove dirt and mud on the

roller and DWT.

2 in 1 Nozzel

Remove tough stains on the carpet.

Sponge Filter

Sponge lter can block large particles and debris, ensure the

appliance’s durability.

* Please install the Sponge lter before use, or it may lead to

weak suction.

Brush Cover Scraper

A scraper to clean the brush cover gap.

Accessory Hose

A 2.5-meter hose to connect the appliance and accessory

brushes.

EN

9

Assembly

How to Assemble/Disassemble

To assemble the handle, insert it into the

appliance until you hear a click.

In the event that the handle need to be

disassembled, press the spring to release the

handle with a tool (like a screwdriver) and lift the

released handle from the appliance.

Wrap the power cord around the cord hooks for

convenient storage.

click

EN

10

Clean Water Tank

MAX

Press the CWT handle to remove it. Open the tank cap, add two bottle caps of

solution to the CWT then ll with tap water to

the Max line and tightly close the cap.

②

①

click

Note:

Only use water under 140°F/60°C.

DO NOT USE HOT WATER.

Install the Clean Water Tank into the appliance.

You should hear a “Click” if done correctly.

Dirty Water Tank

②

①

Install the Dirty Water Tank into the appliance.

You should hear a “Click” if done correctly.

click

EN

11

Accessory Hose & 2 in 1 Nozzle

or

Choose suitable brush head according to the

usage scenario.

Pull it up to uncover the accessory connection

port.

Insert the hose end into the port.

You should hear two “Clicks” if done correctly.

EN

12

Operation

Preparing for Use (Appliance)

Unwrap the power cord and plug into an

electrical outlet.

Step on the recline pedal to recline the unit for

cleaning position.

Tips:

• Press the button to turn on/off the voice

prompt.

• Press the button twice to switch languages.

(More voice languages will be added, please

refer to the actual product for now.)

Press the button and the appliance will start in

AUTO mode by default. Press it again to turn off

the appliance. Switch between AUTO, MAX and

DRY mode by pressing the button.

EN

13

<160°

In AUTO/MAX/DRY mode, the appliance will

stop working when put uprightly and start

running again when you recline.

Grip the back carry handle to lift or move

appliance. Empty CWT and DWT after each

use.

Note:

• The carpet cleaner differs from the traditional vacuum cleaner.

• In all modes, it blows hot air, whose temperature is 158-176°F (70-80°C).

* Appropriate temperature is conducive to dissolve the dirt and helps surfactant in the solution to decompose the dirt.

• In AUTO/MAX mode, it sprays water when moving forward and stops spraying when moving backward.

• Take a spot test on a small and marginal area of the carpet for colorfastness. Gently rub surface

with a damp white cloth. Then wait ten minutes and check for color removal or bleed with a white

paper towel.

• During use, don’t keep the appliance at a resting position for a long time.

Preparing for Use (Accessory Hose & 2 in 1 Nozzle)

Attach the accessory hose, stand the appliance

upright and ensure that it is power on (if not,

press the button), the appliance will enter

in ACCESSORY mode, the appliance will stop

working when you recline.

Store the accessories in the bag after use.

Note:

Do not vacuum foamed liquid.

Stop Working

Do not grip DWT handle to

lift or move the appliance.

EN

14

Cleaning Mode Selection

AUTO Mode

• In AUTO mode, the iLoop sensor automatically detects

how dirty the carpet is and applies the appropriate

volume of water spray.

• A red dirt monitoring loop indicates more dirt is

detected, and a blue loop indicates less dirt is detected.

This mode automatically provides the best cleaning

solution.

MAX Mode

• In AUTO mode, press the button to enter MAX

mode.

• The iLoop only displays the dirty amount, and the spray

volume keeps at the maximum of “100”.

DRY Mode

• In MAX mode, press the button to enter DRY mode.

In DRY mode, the dry level will change with the humidity

detected by the humidity sensor.

• Press the button to switch to AUTO mode.

EN

15

Keep appliance upright

ACCESSORY Mode

• Ensure the appliance is power on (if not, press the button), the appliance will enter into

ACCESSORY mode. Press and hold the button on the 2 in 1 Nozzle to spray water, and release the

button to stop.

• In ACCESSORY mode, the spray volume keeps at the maximum of “100”.

• Stand the appliance upright, remove the accessory hose, the appliance will enter in AUTO mode.

Note:

Keep sharp objects away from the digital display screen to avoid scratches and scrapes.

App

All the functions can be performed using the Tineco app. Download the Tineco app from the App

Store, Google Play and Tineco Ofcial Site.

TinecoTineco

www.tineco.com

Support

App Downloads

GET IT ON

Google Play

Download on the

App Store

App

Downloads

Note:

The default setting for voice prompt is English, you can set other languages via App.

EN

16

Voice Prompt (Contents may vary, pleaseinkindprevail.)

Status Reminder

Guide for Carpet One

Quick start guide

Maintenance tips

Network connection guide

Handle dismantling guide

Accessory use guide

Connect to the appliance Scan the QR code to download the app and

connect the appliance

WiFi network connected Network connected

WiFi network disconnected Connection canceled

Unable to connect WiFi Stand the appliance upright before connecting

Voice prompts on Voice prompts on

Voice prompts disabled Voice prompts disabled

Restore factory settings Factory settings restored

AUTO mode by default AUTO mode

Switch to MAX mode MAX mode

Switch to DRY mode DRY mode

Switch to ACCESSORY mode ACCESSORY mode

Clean Water Tank is empty Clean water tank empty, please rell water and

cleaning solution

Clean the channel Clean the channel under the dirty water tank

Dirty Water Tank is full Dirty water tank full, please empty

Dirty Water Tank not installed correctly Check the dirty water tank

Brush roller is tangled Please clean the brush roller.

Brush roller cover not installed Please install the brush roller cover

Switch to other modes Remove accessory before using other modes

Unable to use DRY mode Remove accessory before using DRY mode

Unable to use ACCESSORY mode Stand the appliance upright to operate

ACCESSORY mode

Appliance is not upright Stand the appliance upright

Accessory installed Accessory installed

Accessory removed Accessory removed

Shutting down Shutting down

Power is off Power off, please clean the dirty water tank

Update rmware Firmware updated

EN

17

Maintenance

Note:

• For optimal performance and to prevent odors, always clean and dry DWT, lters, brush roller, brush

roller cover, 2 in 1 nozzle completely after each use.

• Please make sure each part is installed correctly or the appliance may not work properly.

• After maintenance, place the appliance vertically. Do not expose the appliance to direct sunlight,

and store it indoors in a dry place.

Main Body

To reduce the risk of injury, switch off before

performing maintenance.

Use a cloth to clean the surface with a neutral

detergent. The cloth should be dry to prevent

water from entering the appliance.

Solid red light

When LED loop illuminates red, remove Dirty

Water Tank, clean the dirt sensor with a damp

cloth or the cleaning tool.

EN

18

Dirty Water Tank

②

①

• When dirty water reaches the Max line, the appliance will stop working and show a reminder on the

display and play a voice prompt.

• Step on the recline pedal and press the DWT handle to remove it.

• Pull up the tank lid and mesh lter to empty the DWT. Use the cleaning tool to remove remaining

debris. Rinse the inside of the DWT & tank lid & oater & mesh lter and place back into the

appliance.

Note:

Check if the oater is in good condition and press it to the bottom.

Sponge Filter

Remove the DWT, take the lter out and wash it

after each use.

Reinstall.

click

Floater

Mesh Filter

La page est en cours de chargement...

Tineco CARPET ONE PRO SERIES Smart Carpet Cleaner Manuel utilisateur

Tineco CARPET ONE PRO SERIES Smart Carpet Cleaner Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents