Sony XAV-AX5500 Manuel utilisateur

Marque: Sony

Modèle: XAV-AX5500

Taper: Manuel utilisateur

XAV-AX5500

5-010-462-12(1)

AV RECEIVER

Owner’s Record

The model and serial numbers are located on the bottom of the

unit.

Record the serial number in the space provided below.

Refer to these numbers whenever you call upon your Sony dealer

regarding this product.

Model No. XAV-AX5500

Serial No.

Operating Instructions GB

Mode d’emploi FR

Manual de instrucciones ES

To cancel the demonstration (Demo) display, see page 7.

For the connection/installation, see page 11.

Pour annuler l’affichage de démonstration (Démo), reportez-

vous à la page 7.

Pour le raccordement/l’installation, reportez-vous à la page 12.

Para cancelar la pantalla de demostración (Demostración),

consulte la página 7.

Para la conexión/instalación, consulte la página 12.

2GB

Warning

The nameplate indicating operating voltage, etc., is

located on the bottom of the chassis.

The validity of the CE marking is restricted to only

those countries where it is legally enforced, mainly

in the countries EEA (European Economic Area) and

Switzerland.

WARNING

To prevent fire or shock hazard, do not

expose the unit to rain or moisture.

To avoid electrical shock, do not open the

cabinet. Refer servicing to qualified personnel

only.

This device complies with part 15 of FCC Rules and

Innovation, Science and Economic Development

Canada’s licence-exempt RSS(s). Operation is

subject to the following two conditions:

(1) this device may not cause harmful interference,

and

(2) this device must accept any interference

received, including interference that may cause

undesired operation.

This transmitter must not be co-located or operated

in conjunction with any other antenna or

transmitter.

This equipment complies with FCC/ISED radiation

exposure limits set forth for an uncontrolled

environment and meets the FCC radio frequency

(RF) Exposure Guidelines and RSS-102 of the ISED

radio frequency (RF) Exposure rules as this

equipment has very low levels of RF energy.

If you have any questions about this product:

Visit: https://www.sony.com/electronics/support

Contact: Sony Customer Information Service Center

at 1-800-222-7669

Write: Sony Customer Information Service Center

12451 Gateway Blvd., Fort Myers, FL 33913

Supplier’s Declaration of Conformity

Trade Name: SONY

Model: XAV-AX5500

Responsible Party: Sony Electronics Inc.

Address: 16535 Via Esprillo, San Diego, CA 92127

U.S.A.

Telephone Number: 858-942-2230

This device complies with part 15 of the FCC rules.

Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference,

and

(2) this device must accept any interference

received, including interference that may cause

undesired operation.

For the State of California, USA only

Perchlorate Material – special handling may apply,

See

www.dtsc.ca.gov/hazardouswaste/perchlorate

For safety, be sure to install this unit in the

dashboard of the car as the rear side of the unit

becomes hot during use.

For details, see “Connection/Installation”

(page 11).

FOR THE CUSTOMERS IN THE USA. NOT

APPLICABLE IN CANADA, INCLUDING IN THE

PROVINCE OF QUEBEC.

POUR LES CLIENTS AUX ÉTATS-UNIS. NON

APPLICABLE AU CANADA, Y COMPRIS LA

PROVINCE DE QUÉBEC.

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference to

radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on, the user is

encouraged to try to correct the interference by

one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the

equipment and receiver.

– Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

– Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate this

equipment.

3GB

WARNING: Do not ingest battery,

Chemical Burn Hazard.

The remote commander contains a coin/

button cell battery. If the coin/button cell battery is

swallowed, it can cause severe internal burns in just

2 hours and can lead to death.

Keep new and used batteries away from children. If

the battery compartment does not close securely,

stop using the product and keep it away from

children.

If you think batteries might have been swallowed or

placed inside any part of the body, seek immediate

medical attention.

Note on the lithium battery

Do not expose the battery to excessive heat such as

direct sunlight, fire or the like.

Disclaimer regarding services offered by third

parties

Services offered by third parties may be changed,

suspended, or terminated without prior notice.

Sony does not bear any responsibility in these sorts

of situations.

Caution

IN NO EVENT SHALL SONY BE LIABLE FOR ANY

INCIDENTAL, INDIRECT OR CONSEQUENTIAL

DAMAGES OR OTHER DAMAGES INCLUDING,

WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF

REVENUE, LOSS OF DATA, LOSS OF USE OF THE

PRODUCT OR ANY ASSOCIATED EQUIPMENT,

DOWNTIME, AND PURCHASER’S TIME RELATED TO

OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS

HARDWARE AND/OR ITS SOFTWARE.

Dear customer, this product includes a radio

transmitter.

Please check your vehicle operation manual or

contact the manufacturer of your vehicle or your

vehicle dealer, before you install this product into

your vehicle.

Emergency calls

This BLUETOOTH car handsfree and the electronic

device connected to the handsfree operate using

radio signals, cellular, and landline networks as well

as user-programmed function, which cannot

guarantee connection under all conditions.

Therefore do not rely solely upon any electronic

device for essential communications (such as

medical emergencies).

On BLUETOOTH communication

• Microwaves emitting from a BLUETOOTH device

may affect the operation of electronic medical

devices. Turn off this unit and other BLUETOOTH

devices in the following locations, as it may cause

an accident.

– where inflammable gas is present, in a hospital,

train, airplane, or petrol station

– near automatic doors or a fire alarm

• This unit supports security capabilities that

comply with the BLUETOOTH standard to provide

a secure connection when the BLUETOOTH

wireless technology is used, but security may not

be enough depending on the setting. Be careful

when communicating using BLUETOOTH wireless

technology.

• We do not take any responsibility for the leakage

of information during BLUETOOTH

communication.

If you have any questions or problems concerning

your unit that are not covered in this manual,

consult your nearest Sony dealer.

Warning if your car’s ignition has no ACC

position

Do not install this unit in a car that has no ACC

position. The display of the unit does not turn off

even after turning the ignition off, and this

causes battery drain.

Important notice

4GB

Main Unit and Remote Commander

The VOL (volume) + button has a tactile dot.

Display/touch screen

HOME

Displays the HOME screen (page 6).

ATT (attenuate)

Press and hold for 1 second to attenuate the

sound.

To cancel, press and hold again, or press VOL +.

VOL (volume) +/–

Receptor for the remote commander

/ (previous/next)

Functions differently depending on the selected

source:

– Radio: select a preset station.

– SiriusXM: select a preset channel.

– USB/BT Audio: move to the previous/next file.

Press and hold to:

– Radio: tune into a station automatically

(SEEK+/SEEK–).

– USB/BT Audio: fast-reverse/fast-forward.

OPTION

Displays the OPTION screen (page 6).

VOICE

Press and hold to activate the voice command

function for Apple CarPlay and Android Auto™.

Guide to Parts and Controls

Main unit

5GB

The remote commander can be used to operate the

audio controls. For menu operations, use the touch

screen.

Note

The white buttons in the illustration above are not

supported.

OFF

Turns the source off.

MONITOR OFF

Turns off the monitor.

To turn back on, press again.

EQ (equalizer)

Selects an equalizer curve.

Number buttons (0 to 9)

CLEAR

ATT (attenuate)

Attenuates the sound. Press again to cancel the

attenuation.

 (play/pause)

/ (previous/next)

/ (fast-reverse/fast-forward)

Functions differently depending on the selected

source:

– Radio: select a preset station.

– SiriusXM: select a preset channel.

– USB/BT Audio: move to the previous/next file.

Press and hold to:

– Radio: tune into a station automatically

(SEEK+/SEEK–).

– USB/BT Audio: fast-reverse/fast-forward.

///

Functions differ depending on the selected

source.

– Radio: select a preset station or tune into a

station automatically.

– SiriusXM: select a preset channel or move to

the previous/next channel.

– USB: select a folder or move to the previous/

next file.

ENTER

Enters the selected item.

SRC (source)

Changes the source. Each time you press this

button, a selectable source is displayed in a

popup on the current display.

MODE

Selects the radio band.

VOL (volume) +/–

Remove the insulation film before use.

RM-X170 remote commander

6GB

Screen displays

Playback screen:

HOME screen:

OPTION screen:

Status indication

 (source option)

Opens the source option menu. The available

items differ depending on the source.

Application specific area

Displays playback controls/indications or show

the unit’s status. Displayed items differ

depending on the source.

Clock

Displays the time which are set on the

Date/Time setting.

 (return to the playback screen)

Switches from the HOME screen to the playback

screen.

Sources and Settings select keys

Changes the source or make various settings.

Flick to select the setting icon and other icons.

Touch the source icon you want to select.

Lights up when the sound is attenuated.

Indicates the signal strength status of

the connected SiriusXM Connect Vehicle

Tuner.

Lights up when the Bluetooth® signal is

on. Flashes when the connection is in

progress.

Lights up when the audio device is

playable by enabling the A2DP

(Advanced Audio Distribution Profile).

Lights up when handsfree calling is

available by enabling the HFP (Handsfree

Profile).

Indicates the signal strength status of

the connected mobile phone.

Indicates the remaining battery status of

the connected mobile phone.

Android

Auto

Apple

CarPlay Radio

SXM BT Audio Phone

USB port 1 WebLink USB port 2

Rear

Camera Settings

7GB

Sound select keys

Changes the sound.

 (standby)

Turns the unit in standby mode (USB charging is

still available). To resume, press any buttons.

 (monitor off)

Turns off the monitor. When the monitor is

turned off, touch any part of the display to turn it

back on.

 (EXTRA BASS)

Changes the EXTRA BASS setting.

 (EQ10/Subwoofer)

Changes the EQ10/Subwoofer setting.

Pairing with a BLUETOOTH Device

When connecting a BLUETOOTH device for the first

time, mutual registration (called “pairing”) is

required. Pairing enables this unit and other devices

to recognize each other.

1Press HOME, then touch [Settings] 

[Bluetooth]  [Bluetooth Connection]  [ON]

 [Pairing].

flashes while the unit is in pairing standby

mode.

2Perform pairing on the BLUETOOTH device

so it detects this unit.

3Select your model name shown on the

display of the BLUETOOTH device*.

When pairing is made, stays lit.

* If passkey input is required on the BLUETOOTH device,

input [0000].

Connecting Rear View Camera

By connecting the optional rear view camera to the

CAMERA IN terminal, you can display the picture

from the rear view camera. For details, see

“Connection/Installation” (page 11).

To display the picture from the rear view

camera

Press HOME, then touch [Rear Camera].

Canceling the Demonstration

Mode

1Press HOME, then touch [Settings].

2Touch [General], then touch [Demo] to set to

[OFF].

3To exit the setup menu, touch (back)

twice.

Updating the Firmware

To update the firmware, visit the support site on the

back cover, then follow the online instructions.

Note

During the update, do not remove the USB device.

Basic Operations

8GB

Precautions

• Power antenna (aerial) extends automatically.

•When you transfer ownership or dispose of your

car with the unit installed, initialize all the settings

to the factory settings by performing the factory

reset.

•Do not splash liquid onto the unit.

Notes on safety

•Comply with your local traffic rules, laws, and

regulations.

•While driving

– Do not watch or operate the unit, as it may lead

to distraction and cause an accident. Park your

car in a safe place to watch or operate the unit.

– Do not use the setup feature or any other

function which could divert your attention from

the road.

– When backing up your car, be sure to look back

and watch the surroundings carefully for your

safety even if the rear view camera is connected.

Do not depend on the rear view camera

exclusively.

•While operating

– Do not insert your hands, fingers, or foreign

objects into the unit as it may cause injury or

damage to the unit.

– Keep small articles out of the reach of children.

– Be sure to fasten seatbelts to avoid injury in the

event of sudden movement of the car.

Notes on LCD panel

•Do not get the LCD

panel wet or expose it

to liquids. This may

cause a malfunction.

•Do not press down

hard on the LCD panel

as doing so can distort

the picture or cause a

malfunction (i.e., the

picture may become

unclear or the LCD

panel may be damaged).

•Do not touch the panel with objects other than

with your finger as it may damage or break the

LCD panel.

•Clean the LCD panel with a dry soft cloth. Do not

use solvents such as benzine, thinner,

commercially available cleaners, or antistatic

spray.

•Do not use the unit outside the temperature range

0 ºC to 40 ºC (32 ºF to 104 ºF).

•If your car was parked in a cold or hot place, the

picture may not be clear. However, the monitor is

not damaged and the picture will become clear

after the temperature in your car becomes normal.

•Some stationary blue, red, or green dots may

appear on the monitor. These are called “bright

spots” and can happen with any LCD. The LCD

panel is precision-manufactured with more than

99.99% of its segments functional. However, it is

possible that a small percentage (typically 0.01%)

of the segments may not light up properly. This

will not, however, interfere with your viewing.

Notes on the touch screen

•This unit uses a capacitive touch screen. Touch the

screen directly with your fingertip.

•Multi-touch operation is not supported on this

unit.

• Do not touch the screen with sharp objects such

as a needle, pen, or fingernail. Operation with a

stylus is not supported on this unit.

•Touching the screen with a gloved finger may

cause the unit to operate incorrectly or not

respond.

• Do not let any objects contact the touch screen. If

the screen is touched by an object other than your

fingertip, the unit may not respond correctly.

•Since glass material is used for the screen, do not

subject the unit to strong shock. If cracking or

chipping occurs on the screen, do not touch the

damaged part as it may cause injury.

•Keep other electrical devices away from the touch

screen. They may cause the touch screen to

malfunction.

•If there are water droplets on the touch screen, or

if you touch the screen with wet fingertips, the

touch screen may not react correctly.

Additional Information

Preventing an accident

Pictures appear only after you park the car and

set the parking brake.

If the car starts moving during video playback,

the following caution is displayed and you

cannot watch the video.

[Video blocked for your safety.]

Do not operate the unit or watch the monitor

while driving.

9GB

•Compatible iPhone models:

iPhone XS Max, iPhone XS, iPhone XR, iPhone X,

iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7,

iPhone SE, iPhone 6s Plus, iPhone 6s,

iPhone 6 Plus, iPhone 6, iPhone 5s

•Use of the Made for Apple badge means that an

accessory has been designed to connect

specifically to the Apple product(s) identified in

the badge, and has been certified by the

developer to meet Apple performance standards.

Apple is not responsible for the operation of this

device or its compliance with safety and

regulatory standards.

Please note that the use of this accessory with an

Apple product may affect wireless performance.

This product contains software that Sony uses

under a licensing agreement with the owner of its

contents of the agreement to customers under

requirement by the owner of copyright for the

software.

For details on software licenses, select [Settings] 

[General]  [Open Source Licenses].

If you have any questions or problems concerning

your unit that are not covered in this Operating

Instructions, consult your nearest Sony dealer.

Maintenance

Replacing the lithium battery (CR2025) of the

remote commander

When the battery becomes weak, the range of the

remote commander becomes shorter.

CAUTION

Danger of explosion if battery is incorrectly

replaced. Replace only with the same or equivalent

type.

Note on the lithium battery

Keep the lithium battery out of the reach of children. Should

the battery be swallowed, immediately consult a doctor.

Specifications

FOR THE CUSTOMERS IN THE USA. NOT

APPLICABLE IN CANADA, INCLUDING IN THE

PROVINCE OF QUEBEC.

POUR LES CLIENTS AUX ÉTATS-UNIS. NON

APPLICABLE AU CANADA, Y COMPRIS LA

PROVINCE DE QUÉBEC.

AUDIO POWER SPECIFICATIONS

CTA2006 Standard

Power Output: 20 Watts RMS × 4 at

4Ohms < 1% THD+N

SN Ratio: 80 dBA (reference: 1 Watt into

4 Ohms)

Monitor section

Display type: Wide LCD color monitor

Dimensions: 6.95 in/176 mm

System: TFT active matrix

Number of pixels:

1,152,000 pixels (800 × 3 (RGB) × 480)

Color system:

PAL/NTSC automatic select for CAMERA IN

terminal

About iPhone

Notice on license

+ side up

Lithium battery (CR2025)

10GB

Radio section

Tuning range: 87.5 MHz – 107.9 MHz

Usable sensitivity: 7 dBf

Signal-to-noise ratio: 70 dB (mono)

Separation at 1 kHz: 45 dB

Tuning range: 530 kHz – 1,710 kHz

Sensitivity: 32 µV

USB player section

Interface:

USB port 1 (Hi-speed)

USB port 2 (Full-speed)

Maximum current:

USB port 1: 1.5 A

USB port 2: 500 mA

Wireless communication

Communication System:

BLUETOOTH Standard version 3.0

Output:

BLUETOOTH Standard Power Class 2

(Max. Conducted +1 dBm)

Maximum communication range*1:

Line of sight approx. 10 m (33 ft)

Frequency band:

2.4 GHz band (2.4000 GHz – 2.4835 GHz)

Modulation method: FHSS

Compatible BLUETOOTH Profiles*2:

A2DP (Advanced Audio Distribution Profile) 1.3

AVRCP (Audio Video Remote Control Profile) 1.3

HFP (Handsfree Profile) 1.6

PBAP (Phone Book Access Profile) 1.1

Corresponding codec: SBC, AAC

*1 The actual range will vary depending on factors such as

obstacles between devices, magnetic fields around a

microwave oven, static electricity, reception sensitivity,

antenna (aerial)’s performance, operating system,

software application, etc.

*2 BLUETOOTH standard profiles indicate the purpose of

BLUETOOTH communication between devices.

Power amplifier section

Outputs: Speaker outputs

Speaker impedance: 4  – 8 

Maximum power output: 55 W × 4 (at 4 )

General

Power requirements: 12 V DC car battery

(negative ground (earth))

Rated current consumption: 10 A

Dimensions:

Approx. 178 mm × 100 mm × 139 mm

(7 1/8 in × 4 in × 5 1/2 in) (w/h/d)

Mounting dimensions:

Approx. 182 mm × 111 mm × 120 mm

(7 1/4 in × 4 3/8 in × 4 3/4 in) (w/h/d)

Mass: Approx. 1.0 kg (2 lb 4 oz)

Package contents:

Main unit (1)

Parts for installation and connections (1 set)

Remote Commander (1): RM-X170

Optional accessories/equipment:

SiriusXM Connect Vehicle Tuner: SXV100, SXV200,

SXV300

Ask the dealer for detailed information.

Design and specifications are subject to change

without notice.

SiriusXM Connect Vehicle Tuner and Subscription

sold separately.

www.siriusxm.com

Sirius, XM and all related marks and logos are

trademarks of Sirius XM Radio Inc. All rights

reserved.

The Bluetooth® word mark and logos are registered

trademarks owned by the Bluetooth SIG, Inc. and

any use of such marks by Sony Corporation is under

license. Other trademarks and trade names are

those of their respective owners.

Windows Media is either a registered trademark or

trademark of Microsoft Corporation in the United

States and/or other countries.

This product is protected by certain intellectual

property rights of Microsoft Corporation. Use or

distribution of such technology outside of this

product is prohibited without a license from

Microsoft or an authorized Microsoft subsidiary.

Apple and iPhone are trademarks of Apple Inc.,

registered in the U.S. and other countries.

Apple CarPlay is a trademark of Apple Inc.

Android Auto is a trademark of Google LLC.

WebLink is a registered trademark of Abalta

Technologies, Inc. in the U.S. and a trademark in the

other countries.

All other trademarks are trademarks of their

respective owners.

Copyrights

11GB

Cautions

•Do not install this unit in a car that has no ACC

position. The display of the unit does not turn off

even after turning the ignition off, and this causes

battery drain.

•Run all ground (earth) leads to a common

ground (earth) point.

•Do not get the leads trapped under a screw or

caught in moving parts (e.g., seat railing).

•Before making connections, turn the car ignition

off to avoid short circuits.

•Connect the yellow and red power supply leads

only after all other leads have been connected.

•Be sure to insulate any loose unconnected leads

with electrical tape for safety.

•Choose the installation location carefully so that

the unit will not interfere with normal driving

operations.

• Avoid installing the unit in areas subject to dust,

dirt, excessive vibration, or high temperature, such

as in direct sunlight or near heater ducts.

• Use only the supplied mounting hardware for a

safe and secure installation.

Note on the power supply lead (yellow)

When connecting this unit in combination with other stereo

components, the amperage rating of the car circuit to which

the unit is connected must be higher than the sum of each

component’s fuse amperage rating.

Note on installing in cars with a start-stop system

The unit may restart when starting the engine from start-

stop. In this case, turn off the start-stop system of your car.

Note on installing in cars with electric parking brake

system

For cars with electric parking brakes, some related functions

(such as video blocking function) may not work properly.

Mounting angle adjustment

Adjust the mounting angle to less than 30°.

Parts List for Installation

This parts list does not include all the package

contents.

Connection/Installation

Mounting screws

(5 × max. 9 mm

(7/32 × max. 3/8 in)) (4)





 

Power supply leads (1)

Double-sided tape (1)

Microphone (1)

USB extension cable (1)

Flat-mount base (1)

Connection cable RC-SR1 (1)

Adhesive tape (1)

12GB

Connection

FUSE 10A

Subwoofer*1

Power amplifier*1

from a wired remote control (not

supplied)*4*9

*6*7

White

White/black striped

Gray

Gray/black striped

Green

Green/black striped

Purple

Purple/black striped

Black

Yellow

Red

Blue/white striped

Orange/white striped

Light green

Purple/white striped

from a car antenna (aerial)*5

Rear view

camera*1

For details, see “Making

connections” (page 13).

Front speaker*1*2

Rear speaker*1*2



Satellite radio tuner

(SiriusXM)*1*8

*11

*9*12

USB device (for audio

playback only)*1

Smartphone, USB device

(for audio/video

playback)*1

*11

*9*12

13GB

*1 Not supplied

*2 Speaker impedance: 4  to 8  × 4

*3 RCA pin cord (not supplied)

*4 Depending on the type of car, use an adaptor for a wired

remote control (not supplied).

For details on using the wired remote control, see “Using

the wired remote control” (page 14).

*5 Depending on the type of car, use an adaptor (not

supplied) if the antenna (aerial) connector does not fit.

*6 Whether in use or not, route the microphone input cord

so it does not interfere with driving operations. Secure

the cord with a clamp, etc., if it is installed around your

feet.

*7 For details on installing the microphone, see “Installing

the microphone” (page 13).

*8 For more information on how to install the SiriusXM

Connect Vehicle Tuner, consult the installation guide

included with the tuner.

*10

When using the steering wheel remote control, use the

connection cable RC-SR1  as necessary.

*11

Use the USB extension cable  or a commercially

available one.

*12

Use the adhesive tape  or a commercially available

one.

To a common ground (earth) point

First connect the black ground (earth) lead then

connect the yellow and red power supply leads.

To the +12 V power terminal which is

energized at all times

Be sure to first connect the black ground (earth)

lead to a common ground (earth) point.

To the +12 V power terminal which is

energized when the ignition switch is set to

the accessory position

Be sure to first connect the black ground (earth)

lead to a common ground (earth) point.

To the power antenna (aerial) control lead or

the power supply lead of the antenna (aerial)

booster

It is not necessary to connect this lead if there is

no power antenna (aerial) or antenna (aerial)

booster, or with a manually-operated telescopic

antenna (aerial).

To AMP REMOTE IN of an optional power

amplifier

This connection is only for amplifiers and a

power antenna (aerial). Connecting any other

system may damage the unit.

Note

It will take about 10 seconds to shut down the output of

REM OUT after the unit is turned off.

To a car’s illumination signal

Be sure to first connect the black ground (earth)

lead to a common ground (earth) point.

To the parking brake switch lead

The mounting position of the parking brake

switch lead depends on your car.

Be sure to connect the parking brake lead (light

green) of the power supply leads  to the

parking brake switch lead.

To the +12 V power terminal of the car’s rear

lamp lead (only when connecting the rear

view camera)

Memory hold connection

When the yellow power supply lead is connected,

power will always be supplied to the memory

circuit even when the ignition switch is turned off.

Speaker connection

• Before connecting the speakers, turn the unit off.

• Use speakers with an impedance of 4  to 8  and

with adequate power handling capacities to avoid

damage.

To capture your voice during handsfree calling, you

need to install the microphone .

Making connections



Installing the microphone

Parking brake switch lead

Hand brake type Foot brake type





Clip (not supplied)





14GB

Cautions

•It is extremely dangerous if the cord becomes

wound around the steering column or gearstick.

Be sure to keep it and other parts from interfering

with your driving operations.

• If airbags or any other shock-absorbing

equipment are in your car, contact the store where

you purchased this unit or the car dealer before

installation.

Notes

• When mounting on the dashboard, remove the visor clip

carefully from the microphone , then attach the flat-

mount base  to the microphone .

• Before attaching the double-sided tape , clean the

surface of the dashboard with a dry cloth.

When using the steering wheel remote

control

Installation of the connection cable RC-SR1  is

required before use.

1To enable the steering wheel remote control, select

[General]  [Steering Control]  [Custom]  to

make the registration.

When the registration is complete, the steering

wheel remote control becomes available.

Notes on installing the connection cable RC-SR1 

• Refer to the support site on the back cover for details then

connect each lead properly to the appropriate leads.

Making an improper connection may damage the unit.

• Consulting the dealer or an experienced technician for

help is recommended.

When using the wired remote control

1To enable the wired remote control, set [Steering

Control] in [General] to [Preset].

Installation of the rear view camera (not supplied) is

required before use.

The picture from a rear view camera connected to

the CAMERA IN terminal is displayed when:

– the back lamp of your car lights up (or the shift

lever is set to the R (reverse) position).

– you press HOME, then touch [Rear Camera].

Installation

Mounting the unit in a Japanese car

You may not be able to install this unit in some

Japanese cars. In such a case, consult your Sony

dealer.

When mounting this unit to the preinstalled

brackets of your car, use the mounting screws  in

the appropriate screw holes based on your car:

T for TOYOTA and N for NISSAN.

Note

To prevent a malfunction, install only with the mounting

screws .

When replacing the fuse, be sure to

use one matching the amperage

rating stated on the original fuse.

If the fuse blows, check the power

connection and replace the fuse.

If the fuse blows again after

replacement, there may be an

internal malfunction. In such a case, consult your

nearest Sony dealer.

Using the wired remote control

Using the rear view camera Fuse replacement



To the dashboard/center console

Parts supplied with

your car



Bracket

Fuse (10 A)

2FR

Avertissement

La plaque signalétique indiquant la tension

d’alimentation, etc. se trouve sur le dessous du

châssis.

La validité du marquage CE est uniquement limitée

aux pays où la loi l’impose, principalement dans les

pays de l’EEE (Espace économique européen) et en

Suisse.

AVERTISSEMENT

Pour prévenir les risques d’incendie ou

d’électrocution, tenir cet appareil à l’abri de la

pluie ou de l’humidité.

Ne pas ouvrir le boîtier pour éviter un choc

électrique. Confier la réparation de l’appareil

à un technicien qualifié uniquement.

Le présent appareil est conforme à la partie 15 des

règles de la FCC et aux normes des CNR

d’Innovation, Sciences et Développement

économique Canada applicables aux appareils

radio exempts de licence. L’exploitation est

autorisée aux deux conditions suivantes :

(1) l’appareil ne doit pas produire de brouillage, et

(2) l’appareil doit accepter tout brouillage subi,

même si le brouillage est susceptible d’en

compromettre le fonctionnement.

Cet équipement ne doit pas être placé au même

endroit ni utilisé avec une autre antenne ou un

autre émetteur.

Cet équipement est conforme aux limites

d’exposition aux rayonnements énoncées pour un

environnement non contrôlé et respecte les règles

les radioélectriques (RF) de la FCC lignes directrices

d’exposition et d’exposition aux fréquences

radioélectriques (RF) CNR-102 de l’ISDE puisque cet

appareil a une niveau tres bas d’energie RF.

AVERTISSEMENT : Ne pas ingérer la

pile – risque de brûlure chimique.

La télécommande contient une pile de

type bouton/en forme de pièce de monnaie.

L’ingestion de la pile de type bouton/en forme de

pièce de monnaie peut causer en seulement 2

heures des brûlures internes très graves risquant de

provoquer la mort.

Gardez les piles neuves et usées hors de la portée

des enfants. Si le compartiment de pile ne se ferme

pas correctement, cessez d’utiliser le produit et

gardez-le hors de la portée des enfants.

Si vous pensez que des piles ont pu être avalées ou

placées dans une partie du corps quelconque,

demandez des soins médicaux sans tarder.

Remarque sur la pile au lithium

N’exposez pas la pile à une chaleur excessive

comme à la lumière directe du soleil, au feu ou

autre.

Avis d’exclusion de responsabilité relatif aux

services proposés par des tiers

Les services proposés par des tiers peuvent être

modifiés, suspendus ou clôturés sans avis

préalable. Sony n’assume aucune responsabilité

dans ce genre de situation.

Pour plus de sécurité, installez cet appareil dans

le tableau de bord du véhicule, car la partie

arrière de l’appareil devient chaude en cours de

fonctionnement.

Pour plus de détails, reportez-vous à la section

« Raccordement/Installation » (page 12).

Avertissement si le contact de votre

véhicule ne comporte pas de position ACC

N’installez pas cet appareil dans un véhicule qui

ne comporte pas de position ACC. L’affichage de

l’appareil ne s’éteint pas même lorsque vous

coupez le contact, ce qui risque d’épuiser la

batterie.

3FR

Mise en garde

SONY NE PEUT EN AUCUN CAS ÊTRE TENU

RESPONSABLE DE TOUT DOMMAGE DIRECT,

INDIRECT OU CONSÉCUTIF OU DE TOUT AUTRE

DOMMAGE, Y COMPRIS, SANS LIMITATION, TOUTE

PERTE DE PROFITS, DE REVENU, DE DONNÉES,

D’UTILISATION DU PRODUIT OU DE TOUT APPAREIL

ASSOCIÉ, DE DISPONIBILITÉ ET DE TEMPS DE

L’UTILISATEUR LIÉE À OU DÉCOULANT DE

L’UTILISATION DE CE PRODUIT, MATÉRIEL ET/OU

LOGICIEL.

Cher client, ce produit comprend un émetteur radio.

Veuillez consulter le mode d’emploi de votre

véhicule ou contacter le constructeur ou le

concessionnaire de votre véhicule avant d’installer

ce produit dans votre véhicule.

Appels d’urgence

Cet appareil mains libres BLUETOOTH de véhicule et

le périphérique électronique auquel il est raccordé

fonctionnent à l’aide de signaux radio, des réseaux

cellulaires et par lignes terrestres, ainsi qu’à l’aide

de fonctions programmables par l’utilisateur qui ne

peuvent garantir la connexion dans toutes les

conditions.

Par conséquent, ne vous fiez pas uniquement sur

les périphériques électroniques pour vos

communications importantes (telles que les

urgences médicales).

Communication BLUETOOTH

Les émissions d’hyperfréquences d’un

périphérique BLUETOOTH peuvent perturber le

fonctionnement des appareils médicaux

électroniques. Pour éviter de causer un accident,

éteignez cet appareil et les autres périphériques

BLUETOOTH dans les endroits suivants.

– endroits où du gaz inflammable est présent,

dans un hôpital, un train, un avion ou une

station-service

– à proximité de portes automatiques ou d’un

avertisseur d’incendie

Cet appareil prend en charge les capacités de

sécurité conformes à la norme BLUETOOTH pour

offrir une connexion sécurisée lors de l’utilisation

de la technologie BLUETOOTH sans fil; cependant,

la sécurité peut être insuffisante selon le réglage.

Soyez prudent lorsque vous communiquez au

moyen de la technologie BLUETOOTH sans fil.

Nous ne pouvons être tenus responsables de la

fuite d’informations lors d’une communication

BLUETOOTH.

Si vous avez des questions ou des problèmes

concernant cet appareil qui ne sont pas abordés

dans ce mode d’emploi, contactez votre détaillant

Sony le plus proche.

Avis important

4FR

Appareil principal et télécommande

La touche VOL (volume) + comporte un point

tactile.

Écran d’affichage/tactile

HOME

Permet d’afficher l’écran HOME (page 6).

ATT (atténuation)

Maintenez la touche enfoncée pendant

1 seconde pour atténuer le son.

Pour annuler, maintenez de nouveau la touche

enfoncée ou appuyez sur VOL +.

VOL (volume) +/–

Récepteur pour la télécommande

/ (précédent/suivant)

Fonctionne différemment selon la source

sélectionnée :

– Radio : sélectionner une station

présélectionnée.

– SiriusXM : sélectionner un canal

présélectionné.

– USB/Audio BT : passer au fichier précédent/

suivant.

Maintenez la touche enfoncée pour:

– Radio : syntoniser une station

automatiquement (SEEK+/SEEK–).

– USB/Audio BT : effectuer un retour rapide/une

avance rapide.

OPTION

Permet d’afficher l’écran OPTION (page 6).

VOICE

Maintenez la touche enfoncée pour activer la

fonction de commande vocale pour Apple

CarPlay et Android Auto™.

Guide des pièces et commandes

Appareil principal

5FR

Vous pouvez utiliser la télécommande pour faire

fonctionner les commandes audio. Utilisez l’écran

tactile pour les opérations du menu.

Remarque

Les boutons blancs de l’illustration ci-dessus ne sont pas

pris en charge.

OFF

Permet de désactiver la source.

MONITOR OFF

Permet de désactiver le moniteur.

Pour réactiver, appuyez de nouveau.

EQ (égaliseur)

Permet de sélectionner une courbe de

l’égaliseur.

Touches numériques (0 à 9)

CLEAR

ATT (atténuation)

Atténue le son. Appuyez à nouveau pour

annuler l’atténuation.

 (lecture/pause)

/ (précédent/suivant)

/ (retour rapide/avance rapide)

Fonctionne différemment selon la source

sélectionnée :

– Radio : sélectionner une station

présélectionnée.

– SiriusXM : sélectionner un canal

présélectionné.

– USB/Audio BT : passer au fichier précédent/

suivant.

Maintenez la touche enfoncée pour :

– Radio : syntoniser une station

automatiquement (SEEK+/SEEK–).

– USB/Audio BT : effectuer un retour rapide/une

avance rapide.

///

Les fonctions diffèrent selon la source

sélectionnée.

– Radio : sélectionner une station

présélectionnée ou syntoniser une station

automatiquement.

– SiriusXM : sélectionner un canal

présélectionné ou passer au canal précédent/

suivant.

– USB : sélectionner un dossier ou passer au

fichier précédent/suivant.

ENTER

Permet de valider l’élément sélectionné.

SRC (source)

Permet de changer la source. Chaque fois que

vous appuyez sur cette touche, une source

sélectionnable s’affiche dans une fenêtre

contextuelle sur l’affichage actuel.

MODE

Permet de sélectionner la bande radio.

VOL (volume) +/–

Retirez la feuille de protection avant l’utilisation.

Télécommande RM-X170

6FR

Affichages à l’écran

Écran de lecture :

Écran HOME :

Écran OPTION :

Indication d’état

 (option de sources)

Permet d’ouvrir le menu d’options de sources.

Les paramètres disponibles diffèrent selon la

source.

Zone spécifique de l’application

Permet d’afficher les commandes/indications de

lecture ou d’indiquer l’état de l’appareil. Les

éléments d’affichage diffèrent selon la source.

Horloge

Permet d’afficher l’heure définie dans le

paramètre Date/Heure.

 (retour à l’écran de lecture)

Permet de passer de l’écran HOME à l’écran de

lecture.

Touches de sélection de sources et réglages

Permet de changer la source ou d’effectuer

divers réglages.

Parcourez pour sélectionner l’icône de réglage

et d’autres icônes.

Touchez à l’icône de source que vous souhaitez

sélectionner.

S’allume lorsque le son est atténué.

Indique la puissance de signal du

récepteur SiriusXM Connect Voiture

connecté.

S’allume lorsque le signal Bluetooth® est

activé. Clignote lorsque la connexion est

en cours.

S’allume lorsque la lecture du

périphérique audio est possible grâce à

l’activation du profil A2DP (Advanced

Audio Distribution Profile).

S’allume lorsque la fonction d’appel en

mains libres est disponible grâce à

l’activation du profil HFP (Handsfree

Profile).

Indique la puissance de signal du

téléphone mobile connecté.

Indique la charge de batterie restante du

téléphone mobile connecté.

Android

Auto

Apple

CarPlay Radio

SXM Audio BT Téléphone

USB port 1 WebLink USB port 2

Cam. recul Réglages

La page est en cours de chargement...

Sony XAV-AX5500 Manuel utilisateur

Marque: Sony

Modèle: XAV-AX5500

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Sony XAV-AX5500 User manual
español: Sony XAV-AX5500 Manual de usuario

Documents connexes

Autres documents

Panasonic TA-220-TUND-MI Manuel utilisateur