Sony CDX-M620 Manuel utilisateur

Catégorie
Récepteurs multimédia de voiture
Taper
Manuel utilisateur

Ce manuel convient également à

Operating Instructions
Mode d’emploi
Manual de instrucciones
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record these numbers in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. CDX-M770/M670/M620 Serial No.
CDX-M770 CDX-M670
CDX-M620
For installation and connections, see the supplied installation/connections manual.
En ce qui concerne l’installation et les connexions, consulter le manuel
d’installation/raccordement fourni.
Para obtener información sobre la instalación y las conexiones, consulte el manual
de instalación/conexiones suministrado.
© 2001 Sony Corporation
3-230-446-11 (1)
US
FR
ES
FM
/
AM
Compact Disc
Player
2
Warning
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
THIS DEVICE COMPLIES WITH PART 15
OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO
CONDITIONS;
(1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
CAUTION
The use of optical instruments with this product
will increase eye hazard.
Welcome !
Thank you for purchasing this Sony Compact
Disc Player. You can enjoy its various features
even more with:
Display language*
1
choice from English,
French, Spanish.
Optional CD/MD units (both changers and
players)*
2
.
CD TEXT information (displayed when a CD
TEXT disc*
3
is played).
Supplied controller accessory
Card remote commander RM-X110
Wireless rotary commander RM-X5S (CDX-
M770)
Optional controller accessories
Wireless rotary commander RM-X5S (CDX-
M670/M620)
*1 Some display indications do not appear in the
language you select.
*2 This unit works with Sony products only.
*3 A CD TEXT disc is an audio CD that includes
information such as the disc name, artist name,
and track names. This information is recorded on
the disc.
3
Table of Contents
Location of controls. . . . . . . . . . . . . . . . . . . . 4
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Notes on CDs. . . . . . . . . . . . . . . . . . . . . . . . . 7
Getting Started
Resetting the unit. . . . . . . . . . . . . . . . . . . . . . 8
Detaching the main display window . . . . . . . 8
Setting the clock . . . . . . . . . . . . . . . . . . . . . . 9
CD Player
CD/MD Unit (optional)
Playing a disc. . . . . . . . . . . . . . . . . . . . . . . . 10
Display items. . . . . . . . . . . . . . . . . . . . . . . . 10
Playing tracks repeatedly
Repeat Play . . . . . . . . . . . . . . . . . . . . 11
Playing tracks in random order
Shuffle Play . . . . . . . . . . . . . . . . . . . . 11
Labeling a CD
Disc Memo*. . . . . . . . . . . . . . . . . . . . 11
Locating a disc by name
List-up* . . . . . . . . . . . . . . . . . . . . . . . 12
Selecting specific tracks for playback
Bank*. . . . . . . . . . . . . . . . . . . . . . . . . 13
* Functions available with optional CD/MD unit
Radio
Storing stations automatically
Best Tuning Memory (BTM). . . . . . . 14
Receiving the stored stations. . . . . . . . . . . . 14
Storing only the desired stations . . . . . . . . . 15
Storing station names
Station Memo. . . . . . . . . . . . . . . . . . . 15
Tuning in a station through a list
List-up . . . . . . . . . . . . . . . . . . . . . . . . 16
Tuning up for your best sound
Setting the equalizer (EQ7). . . . . . . . . . . . . 17
Setting the soundstage menu
Dynamic Soundstage Organizer
(DSO) . . . . . . . . . . . . . . . . . . . . . . . . 18
Listening to each programme source in its
registered DSO
Source Sound Memory (SSM) . . . . . 19
Adjusting the sound characteristics . . . . . . 19
Selecting the listening position
(CDX-M770 only) . . . . . . . . . . . . . . . . . 20
Adjusting the balance (BAL) . . . . . . . . . . . 20
Adjusting the bass
(CDX-M670/M620 only). . . . . . . . . . . . 20
Adjusting the treble
(CDX-M670/M620 only). . . . . . . . . . . . 21
Adjusting the balance (FAD)
(CDX-M670/M620 only). . . . . . . . . . . . 21
Adjusting the front and rear volume
(CDX-M770 only) . . . . . . . . . . . . . . . . . 21
Adjusting the volume of the
subwoofer(s) . . . . . . . . . . . . . . . . . . . . . . . . 22
Other adjustable items
(CDX-M670/M620 only). . . . . . . . . . . . 23
Other Functions
Using the rotary commander. . . . . . . . . . . . 23
Quickly attenuating the sound . . . . . . . . . . 25
Selecting the spectrum analyzer . . . . . . . . . 25
Changing the sound and display settings
Menu . . . . . . . . . . . . . . . . . . . . . . . . . 26
Labeling a Motion Display. . . . . . . . . . . . . 27
Connecting auxiliary audio equipment
(CDX-M770 only) . . . . . . . . . . . . . . . . . 27
TV/Video (optional)
Watching the TV. . . . . . . . . . . . . . . . . . . . . 28
Watching a video . . . . . . . . . . . . . . . . . . . . 28
Storing TV channels automatically. . . . . . . 28
Storing only the desired TV channels. . . . . 28
Storing the TV channel names . . . . . . . . . . 29
Displaying the information stored
on a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Watching the TV or video while listening to a
CD or MD
Simultaneous Play. . . . . . . . . . . . . . . 30
Additional Information
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 31
Removing the unit. . . . . . . . . . . . . . . . . . . . 32
Specifications . . . . . . . . . . . . . . . . . . . . . . . 33
Troubleshooting . . . . . . . . . . . . . . . . . . . . . 34
Error displays/Messages. . . . . . . . . . . . . . . 35
4
Location of controls
Refer to the pages listed for details.
: During Playback : During radio reception : During menu mode
a SCRL (scroll) button 10
b DSPL (display mode change) button
10, 12, 27
c Number buttons
(1) REP 11
(2) SHUF 11
14, 15
28, 29
d EQ7 button 17
e MENU button 9, 11, 12, 13, 14, 15, 16,
17, 18, 19, 21, 22, 23, 25, 26, 27, 28, 30
f SOURCE (Power on/Radio/CD/MD)
button 9, 10, 12, 14, 15, 17, 18, 20, 21,
22, 25, 26, 27, 28, 30
g </, SEEK /+ buttons 19, 20, 21, 22
10
14, 15
28, 30
9, 11, 13, 17, 18, 19, 22, 23, 25,
26, 27
h SOUND button 19, 20, 21, 22
i OFF (Stop/Power off) button
10, 27,
30
j VOL +/ buttons
k
OPEN/CLOSE button
10, 32
l MODE button
10, 12
14, 15
28
m DSO button 18
n LIST button
12
16
28, 29
o M/m DISC +/ buttons
10, 12
14, 15, 16
30
9, 11, 12, 13, 14, 16, 17, 18, 19,
21, 22, 23, 25, 26, 27, 28
p ENTER button
12
15, 16
9, 11, 12, 13, 14, 16, 17, 18, 21,
22, 23, 25, 26, 27, 28
22, 30
q ATT button 25
Card remote commander RM-X110
CD/MD
RADIO MENU
DISC
ATTOFF
SCRL
REP SHUF
DSPL
1
4
MODE
2
5
3
6
SOURCE
DISC
+
SEEK
+
SEEK
SOUND
ENTER
MENU
LIST
EQ7 DSO
VOL
+
OPEN/CLOSE
DISC
SOURCE
DISC
+
SEEK
+
SEEK
< (SEEK)
(): to select
leftwards/
.
, (SEEK)
(+): to select
rightwards/
>
M (DISC)
(+): to select upwards
In menu mode, the currently selectable button(s) of
these four are indicated with av” in the display.
m (DISC)
(): to select downwards
Note
If the unit is turned off by pressing (OFF) for 2
seconds, the unit cannot be operated with the card
remote commander unless (SOURCE) on the unit is
pressed, or a disc is inserted to activate the unit first.
Tip
Refer to “Replacing the lithium battery” for details on
how to replace the batteries (page 31).
CD/MD
RADIO
TV
CD/MD
RADIO
TV
MENU
CD/MD
RADIO
TV
CD/MD
RADIO
TV
CD/MD
RADIO
TV
MENU
CD/MD
RADIO
MENU
TV
5
The corresponding buttons of the unit
control the same functions as those on
the card remote commander.
a OPEN button 8, 10, 32
b Main display window
c qf Receptor for the card remote
commander
d qs Reset button 8
e Volume adjust buttons
f SCRL (scroll) button
g SOURCE button
h DSPL (display mode change) button
i Sub display window
j DISC +/ (cursor up/down) buttons
SEEK /+ (cursor left/right) buttons
k MENU button
m LIST button
o
CLOSE (front panel close) button
8, 10
p OFF (Stop/Power off) button*
q MODE button
r Number buttons
s SOUND button
t EQ7 button
u ENTER button
v DSO button
w Z (eject) button 10, 30
Main display panel
Operation side
CDX-M770/CDX-M670
/CDX-M620
CLOSE
S
C
R
L
D
S
P
L
O
F
F
M
O
D
E
SOURCE
ENTER
SOUND
MENU
LIST
DISC
RESET
DISC
DSO
REP SHUF
EQ7
AF TA
123456
continue to next page t
6
* Warning when installing in a car without
an ACC (accessory) position on the
ignition switch
After turning off the ignition, be sure to press
the power on/off button on the unit for 2
seconds to turn off the clock display.
Otherwise, the clock display does not turn off
and this causes battery drain.
Concerning the front panel positions
This unit has 3 front panel open modes.
Main display position
Detaching position
Sub display position
Precautions
If your car was parked in direct sunlight, allow
the unit to cool off before operating it.
Power aerials will extend automatically while
the unit is operating.
If you have any questions or problems
concerning your unit that are not covered in this
manual, please consult your nearest Sony dealer.
Moisture condensation
On a rainy day or in a very damp area, moisture
condensation may occur inside the lenses and
display of the unit. Should this occur, the unit
will not operate properly. In such a case, remove
the disc and wait for about an hour until the
moisture has evaporated.
To maintain high sound quality
Be careful not to splash juice or other soft drinks
onto the unit or discs.
To prevent the wireless rotary
commander RM-X5S from falling off
(supplied with CDX-M770 only)
If the wireless commander falls off, it could
cause an accident.
Be sure to attach the supplied strap when
installing the rotary commander near the
steering wheel.
Be sure that the strap does not get caught on the
car controls (gear, shifter, etc.).
Be sure to tighten the stopper of the strap after
hanging the strap on the indicator switch, etc.
unit
unit
unit
7
Notes on CDs
To keep the disc clean, do not touch the surface.
Handle the disc by its edge.
Keep your discs in their cases or disc
magazines when not in use.
Do not subject the discs to heat/high
temperature. Avoid leaving them in parked cars
or on dashboards/rear trays.
Do not attach labels, or use discs with sticky
ink/residue. Such discs may stop spinning
when used, causing a malfunction, or may ruin
the disc.
Discs with non-standard shapes (e.g., heart,
square, star) cannot be played on this unit.
Attempting to do so may damage the unit. Do
not use such discs.
You cannot play 8 cm (3in.) CDs.
Before playing, clean the discs with a
commercially available cleaning cloth. Wipe
each disc from the centre out. Do not use
solvents such as benzine, thinner, commercially
available cleaners, or antistatic spray intended
for analog discs.
Notes on CD-R/CD-RW discs
You can play CD-Rs (recordable CDs)
designed for audio use on this unit.
Look for this mark to distinguish CD-Rs for
audio use.
This mark denotes that a disc is not for audio use.
Some CD-Rs (depending on the equipment
used for its recording or the condition of the
disc) may not play on this unit.
You cannot play a CD-R that is not finalized*.
* A process necessary for a recorded CD-R disc to
be played on the audio CD player.
You cannot play CD-RWs (rewritable CDs) on
this unit.
8
Getting Started
Resetting the unit
Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Press the reset button with a pointed object, such
as a ball-point pen.
Notes
After resetting the unit in the closed position, be sure
to press (OPEN) once before operating further. If a
disc is in the unit, the disc will be ejected
automatically. Insert the disc again.
Pressing the reset button will erase the clock setting
and some stored contents.
Resetting the unit during use in sub
display-position
Reset button by the disc-slot with a pointed
object, such as a ball-point pen.
Detaching the main display
window
You can detach the main display window of this
unit to protect the unit from being stolen.
Caution alarm
If you turn the ignition switch to the OFF
position without removing the front panel, the
caution alarm will beep for a few seconds.
1 Press (OPEN) on the unit for 2
seconds.
CD/MD playback or radio reception stops,
and the front panel automatically tilts at an
angle of 30°.
2 Detach the main display window as
illustrated.
After the main display window detaching is
complete, the front panel closes automatical.
Notes
If you detach the main display window while the unit
is still turned on, the power will turn off automatically
to prevent the speakers from being damaged.
Do not drop or put excessive pressure on the display
window.
Do not subject the main display window to heat/high
temperature or moisture. Avoid leaving it in parked
cars or on dashboards/rear trays.
Tips
If you want to detach the main display window, when
the front panel is in the sub-display position, press
(CLOSE) for 2 seconds.If a disc is partially inserted,
load the disc correcty or remove the disc from the
unit.
When carrying the main display window with you,
use the supplied front panel case.
Reset button
Reset button
(OPEN)
9
Attaching the main display window
panel
Place the main display window on the front side
of the unit as illustrated, then lightly push the
front panel into position until it clicks.
Press (SOURCE) (or insert a disc) to operate the
unit.
Note
Do not put anything on the inner surface of the main
display window.
Setting the clock
The clock uses a 12-hour digital indication.
Example: To set the clock to 10:08
1 Press (MENU), then press M or m (the
either (+/) side of (DISC)) repeatedly
until Clock appears.
1 Press (ENTER).
The hour indication flashes.
2 Press M or m to set the hour.
3 Press , (the (+) side of (SEEK)).
The minute indication flashes.
4 Press M or m to set the minute.
2 Press (ENTER).
The clock starts. After the clock setting is
completed, the display returns to normal play
mode.
Tip
When D.Info mode is set to on, the time is always
displayed (page 26).
10
CD Player
CD/MD Unit (optional)
In addition to playing a CD with this unit, you
can also control external CD/MD units.
Note
If you connect an optional CD unit with the CD TEXT
function, the CD TEXT information will appear in the
display when you play a CD TEXT disc.
Playing a disc
(With this unit)
1 Press (OPEN/CLO SE) or (OPEN) on the
unit and insert the disc (labeled side
up).
Playback starts automatically.
2 Press (OPE N/CLOSE) or (CLOSE) on
the unit to close the front panel.
If a disc is already inserted, press (SOURCE)
repeatedly until CD appears to start playback.
Notes
When the last track on the disc is over, playback
restarts from the first track of the disc.
With optional unit connected, playback of the same
source will continue on to the optional CD/MD unit.
(With optional unit)
1 Press (SOURCE) repeatedly to select
CD or MD.
2 Press (MODE) repeatedly until the
desired unit appears.
Playback starts.
Display items
When the disc/track changes, any prerecorded
title*
1
of the new disc/track is automatically
displayed (if the Auto Scroll function is set to
on, names exceeding 9 characters will be
scrolled (page 26)).
*1 When pressing (DSPL), NO D.Name or NO
T. N am e indicates that there is no Disc Memo
(page 11) or prerecorded name to display.
*2 Only for CD TEXT discs with the artist name.
Notes
Some characters cannot be displayed.
For some CD TEXT discs with very many
characters, information may not scroll.
This unit cannot display the artist name for each
track of a CD TEXT disc.
Tip
When Auto scroll is set to off, and the disc/track is
changed, the disc/track name does not scroll.
To Press
Stop playback (OFF)
Eject the disc (OPEN/CLOSE) , or
(OPEN) then Z
Skip tracks
Automatic
Music Sensor
</, (SEEK) (
./>)
[once for each track]
Fast-forward/
reverse
Manual Search
</, (SEEK) (
m/M)
[hold to desired point]
To Press
Skip discs
Disc selection
M/m (DISC) (+/)
To Press
Switch display
item
(DSPL)
Scroll display item (SCRL)
Displayable items
Disc name*
1
/artist name*
2
Track title*
1
Track
number
Disc
number
Elapsed
playing time
Displayable items
Music source
Clock
11
Playing tracks repeatedly
— Repeat Play
The disc in the main unit will repeat a track or
the entire disc when it reaches the end. For repeat
play, you can select:
Repeat 1 to repeat a track.
Repeat 2* to repeat a disc.
* Available only when one or more optional CD/MD
units are connected.
During playback, press (1) (REP)
repeatedly until the desired setting
appears in the display.
Repeat Play starts.
To return to normal play mode, select Repeat
off.
Playing tracks in random
order
— Shuffle Play
You can select:
Shuf 1 to play the tracks on the current disc
in random order.
Shuf 2*
1
to play the tracks in the current
optional CD (MD) unit in random order.
Shuf All*
2
to play all the tracks in all the
connected CD (MD) units (including this unit)
in random order.
*1 Available only when one or more optional CD (MD)
units are connected.
*2 Available only when one or more optional CD units,
or two or more optional MD units are connected.
During playback, press (2) (SHUF)
repeatedly until the desired setting
appears in the display.
Shuffle Play starts.
To return to normal play mode, select Shuf off.
Note
Shuf All will not shuffle tracks between CD units and
MD units.
Labeling a CD
— Disc Memo (For a CD unit with the
CUSTOM FILE function)
You can label each disc with a custom name
(Disc Memo). You can enter up to 8 characters
for a disc. If you label a CD, you can locate the
disc by name (page 12).
1 Start playing the disc you want to label
in a CD unit with the CUSTOM FILE
function.
2 Press (MENU), then press M or m
repeatedly until Name Edit appears.
3 Press (ENTER).
The unit will repeat the disc during the
labeling procedure.
4 Enter the characters.
1 Press M*
1
repeatedly to select the
desired character.
A t B t C ... t 0 t 1 t 2 ... t +
t t
*
... t *
2
t A
*1 For reverse order, press m.
*2 (blank space)
2 Press , after locating the desired
character.
If you press < (the () side of (SEEK)),
you can move back to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
5 To return to normal CD play mode,
press (ENTER).
continue to next page t
12
Tips
Simply overwrite or enter “” to correct or erase a
name.
There is another way to start labeling a CD: Press
(LIST) for 2 seconds instead of performing steps 2
and 3. You can also complete the operation by
pressing (LIST) for 2 seconds instead of step 5.
You can label CDs on a unit without the CUSTOM
FILE function if that unit is connected along with a
CD unit that has the function. The Disc Memo will be
stored in the memory of the CD unit with the
CUSTOM FILE function.
Note
Repeat/shuffle play is suspended until the Name Edit
is complete.
Viewing the Disc Memo
As a display item, the Disc Memo always takes
priority over any original CD TEXT information.
Tip
To find out about other items that can be displayed,
see page 10.
Erasing the Disc Memo
1 Press (SOURCE) repeatedly to select
CD.
2 Press (MODE) repeatedly to select the
CD unit storing the Disc Memo.
3 Press (MENU), then press M or m
repeatedly until Name Del appears.
4 Press (ENTER).
The stored names will appear.
5 Press M or m repeatedly to select the
disc name you want to erase.
The stored names will appear.
6 Press (ENTER) for 2 seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7 Press (ENTER).
The unit returns to normal CD play mode.
Notes
When the Disc Memo for a CD TEXT disc is erased,
the original CD TEXT information is displayed.
If you cannot find the Disc Memo you want to erase,
try selecting a different CD unit in step 2.
Locating a disc by name
List-up (For a CD unit with the CD TEXT/
CUSTOM FILE function, or an MD unit)
You can use this function for discs that have been
assigned custom names*
1
or for CD TEXT
discs*
2
.
*1 Locating a disc by its custom name: when you
assign a name for a CD (page 11) or an MD.
*2 Locating discs by the CD TEXT information: when
you play a CD TEXT disc on a CD unit with the CD
TEXT function.
1 Press (LIST).
The name assigned to the current disc appears
in the display.
2 Press M or m repeatedly until you find
the desired disc.
3 Press (ENTER) to play the disc.
Notes
Some letters cannot be displayed (exception: Disc
Memo).
If the optional TV monitor is connected, the list
appears on the TV monitor instead of the display on
the unit.
To Press
View (DSPL) during CD/CD
TEXT disc playback
13
Selecting specific tracks for
playback
Bank (For a CD unit with the CUSTOM FILE
function)
If you label the disc, you can set the unit to skip
or play the tracks of your choice.
1 Start playing the disc you want to
label.
2 Press (MENU), then press M or m
repeatedly until Bank Sel appears.
3 Press (ENTER).
4 Label the tracks.
1 Press < or , repeatedly to select
the track you want to label.
2 Press (ENTER) repeatedly to select
Play or Skip.
5 Repeat step 4 to set Play or Skip
for all the tracks.
6 Press (ENTER).
The unit returns to normal CD play mode.
Notes
You can set Play and Skip for up to 24 tracks.
You cannot set Skip for all the tracks on a CD.
Playing specific tracks only
You can select:
Bank on to play the tracks with the Play
setting.
Bank inv (Inverse) to play the tracks with
the Skip setting.
1 During playback, press (MENU), then
press M or m repeatedly until Bank
on, Bank inv, or Bank off
appears.
2 Press , repeatedly until the desired
setting appears.
3 Press (ENTER).
Playback starts from the track following the
current one.
To return to normal play mode, select Bank off
in step 2.
14
Radio
The unit can store up to 6 stations per band
(FM1, FM2, FM3, AM1, and AM2).
Caution
When tuning in stations while driving, use Best
Tuning Memory to prevent accidents.
Storing stations
automatically
Best Tuning Memory (BTM)
The unit selects the stations with the strongest
signals within the selected band, and stores them
in the order of their frequency.
1 Press (SOURCE) repeatedly to select
the radio.
2 Press (MODE) repeatedly to select the
band.
3 Press (MENU), then press M or m
repeatedly until BTM appears.
4 Press (ENTER).
A beep sounds when the setting is stored.
Notes
If only a few stations can be received due to weak
signals, some number buttons will retain their former
settings.
When a number is indicated in the display, the unit
starts storing stations from the one currently
displayed.
Receiving the stored stations
1 Press (SOURCE) repeatedly to select
the radio.
2 Press (MODE) repeatedly to select the
band.
3 Press the number button ((1) to (6))
on which the desired station is stored.
Tip
Press M or m to receive the stations in the order they
are stored in the memory (Preset Search function).
If preset tuning does not work
Press either side of (SEEK) to search
for the station (automatic tuning).
Scanning stops when the unit receives a
station. Repeat until the desired station is
received.
Tips
If automatic tuning stops too frequently, turn on the
Local Seek to limit seek to stations with stronger
signals (see Changing the sound and display
settings on page 26).
If you know the frequency of the station you want to
listen to, press and hold either side of (SEEK) to
locate the approximate frequency, then press
(SEEK) repeatedly to fine adjust to the desired
frequency (manual tuning).
If FM stereo reception is poor
Select monaural reception mode
(see Changing the sound and display
settings on page 26).
The sound improves, but becomes monaural
(ST disappears).
Note
If interference occurs, this unit will automatically
narrow the reception frequency to eliminate noise (IF
Auto function). In such cases, some FM stereo
broadcasts may become monaural while in the stereo
reception mode.
Tip
To always hear FM stereo broadcasts in stereo, you
can change the IF Auto setting and widen the
frequency signal reception (see Changing the sound
and display settings on page 26). Note that some
interference may occur in this setting.
15
Storing only the desired
stations
You can manually preset the desired stations on
any chosen number button.
1 Press (SOURCE) repeatedly to select
the radio.
2 Press (MODE) repeatedly to select the
band.
3 Press either side of (SEEK) to tune in
the station that you want to store.
4 Press the desired number button ((1)
to (6)) for 2 seconds until MEM
appears.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.
Storing station names
Station Memo
You can assign a name to each radio station and
store it in memory. The name of the station
currently tuned in appears in the display. You can
assign a name using up to 8 characters for a
station.
Storing the station names
1 Tune in a station whose name you
want to store.
2 Press (MENU), then press M or m
repeatedly until Name Edit appears.
3 Press (ENTER).
4 Enter the characters.
1 Press M*
1
repeatedly to select the
desired character.
A t B t C ... t 0 t 1 t 2 ... t +
t t
*
... t *
2
t A
*1 For reverse order, press m.
*2 (blank space)
2 Press , after locating the desired
character.
If you press <, you can move back to the
left.
3 Repeat steps 1 and 2 to enter the
entire name.
5 Press (ENTER).
continue to next page t
16
Tips
Simply overwrite or enter “” to correct or erase a
name.
There is another way to start storing station names:
Press (LIST) for 2 seconds instead of performing
steps 2 and 3. You can also complete the operation
by pressing (LIST) for 2 seconds instead of step 5.
Erasing the station name
1 During radio reception, press (MENU),
then press M or m repeatedly until
Name Del appears.
2 Press (ENTER).
3 Press M or m repeatedly to select the
station whose name you want to
erase.
4 Press (ENTER) for 2 seconds.
The name is erased.
Repeat steps 3 to 4 if you want to erase other
names.
5 Press (ENTER).
The unit returns to normal radio reception
mode.
Note
If you have already erased all of the station names,
NO Data appears in step 4.
Tuning in a station through a
list
List-up
1 During radio reception, press (LIST)
momentarily.
The frequency or the name assigned to the
current station appears in the display.
2 Press M or m repeatedly until you find
the desired station.
If no name is assigned to the selected station,
the frequency appears in the display.
3 Press (ENTER) to tune in the desired
station.
Note
If the optional TV monitor is connected, and if the
monitor responds to this function, the list appears on
the TV monitor instead of the display on the unit.
17
Tuning up for your best
sound
The unit provides the various functions to adjust
the sound so that you can enjoy the best sounding
music.
Setting the equalizer (EQ7)
You can select an equalizer curve for 7 music
types (Vocal, Club, Jazz, New Age, Rock,
Custom, and Xplod).
You can store and adjust the equalizer settings
for frequency and level.
Selecting the equalizer curve
1 Press (SOURCE) to select a source
(radio, CD, or MD).
2 Press (EQ7) repeatedly until the
desired equalizer curve.
Each time you press (EQ7), the item
changes.
To cancel the equalizing effect, select off.
After 3 seconds, the display returns to the
normal playback mode.
Adjusting the equalizer curve
1 Press (MENU).
2 Press M or m repeatedly until EQ7
Tune appears, then press (ENTER).
3 Press < or , to select the desired
equalizer curve, then press (ENTER).
Each time you press (SEEK), the item
changes.
4 Select the desired frequency and level.
1 Press < or , to select the desired
frequency.
Each time you press < or ,, the
frequency changes as follows:
62 Hz y 157 Hz y 396 Hz y 1.0 kHz
y 2.5 kHz y 6.3 kHz y 16 kHz
2 Press M or m to adjust the desired
volume level.
(CDX-M770)
The volume level is adjustable by 1 dB
steps from 12 dB to +12 dB.
(CDX-M670/M620)
The volume level is adjustable by 1 dB
steps from 10 dB to +10 dB.
To restore the factory-set equalizer curve,
press (ENTER) for 2 seconds.
5 Press (ENTER).
After the effect setting is complete, the
display returns to the normal playback mode.
18
Setting the soundstage menu
Dynamic Soundstage Organizer (DSO)
If your speakers are installed into the lower part
of the doors, the sound will come from below
and may not be clear.
The DSO (Dynamic Soundstage Organizer)
function creates a more ambient sound as if there
were speakers in the dashboard (virtual
speakers).
Selecting the DSO mode (CDX-M770)
DSO mode of CDX-M770
Image of virtual speakers
*1 STD
*2 Wide
*3 STD+depth
*4 Wide+depth
*5 Actual speakers position (lower part of the front
doors)
1 Press (SOURCE) to select a source
(tuner, CD, or MD).
2 Press (DSO) repeatedly to select the
desired DSO mode.
To cancel the DSO mode, select off.
After 3 seconds, the display returns to the
normal playback mode.
Tips
The DSO effect may be hard to discern depending
on the type of car you are driving and the music you
are listening to.
When DSO setting is "WIDE," the FM reception is
inaudible. In this case, reset the DSO setting to
"STD."
Turning the DSO mode on (off) (CDX-
M670/M620)
DSO mode of CDX-M670/M620
1 Press (SOURCE) to select a source
(tuner, CD, or MD).
2 Press (DSO) to select on or off.
To cancel the DSO mode, select DSO off.
After 3 seconds, the display returns to the
normal playback mode.
Adjusting the DSO mode (CDX-M770)
1 Press (SOURCE) to select a source
(tuner, CD, or MD).
2 Press (MENU).
3 Press M or m repeatedly until DSO
tune appears, then press (ENTER).
4 Press < or , to select the desired
DSO mode. then press (ENTER).
5 Select the effect level.
You can select the desired effect from 3 effect
lebels for each DSO mode.
Press M or m repeatedly to select
desired effect.
To restore the effect, press (ENTER) for 2
seconds.
6 Press (ENTER).
Display window Meaning
STD
Virtual speakers (Standard)
WIDE
Virtual speakers (Wide)
STD-SP
Standard+depth
WIDE-SP
Wide+depth
off
Cancel
*1
*1
*5
*4
*3
*4
*2
*3
*5
Effect 3
Effect 1
*2
Memory presets Meaning
on
Virtual speakers
off
Cancel
19
If the sound from the tweeter is too
shrill (CDX-M770)
1 While the unit is operating, press
(MENU).
2 Press M or m repeatedly until DSO
norm appears.
3 Press , to select DSO soft.
4 Press (MENU).
To restore the sound, select DSO norm.
Listening to each programme
source in its registered DSO
Source Sound Memory (SSM)
Each time you return to the same source, you can
hear the same DSO menu and equalizer curve
registered for that source, even after changing the
programme source or turning the unit off and
then on again.
Adjusting the sound
characteristics
You can adjust the sound characteristics.
The bass and treble levels and subwoofer volume
can be stored independently for each source.
1 Select the item you want to adjust by
pressing (SOUND) repeatedly.
Each time you press (SOUND), the item
changes as follows:
(CDX-M770)
POS (position) t BAL (left-right)
t F (front volume) t R (rear volume) t
SUB (subwoofer volume)
(CDX-M670/M620)
BAS (bass)
t TRE (treble)
t BAL (left-right) t FAD (front-rear)
t SUB (subwoofer volume)
2 Adjust the selected item by pressing
< or ,.
When adjusting with the rotary commander,
press (SOUND) and rotate the VOL control.
Note
Adjust within 3 seconds after selecting the item.
20
Selecting the listening
position (CDX-M770 only)
You can set a delayed time for the sound to reach
the listeners from the speakers.
In this way, the unit can simulate a natural sound
field so that you feel as if you are in the center of
the sound field no matter where you sit in the car.
1 Press (SOURCE) to select a source
(tuner, CD, or MD).
2 Press (SOUND) repeatedly until POS
appears.
3 Press < or , to select the desired
listening position.
All y Front y Front-R y
Front-L y Rear y off y All
The listening positions appear in the order
shown above.
To cancel the POS mode, select off.
After three seconds, the display returns to the
normal playback mode.
Adjusting the balance (BAL)
You can adjust the sound balance from the left
and right speakers.
1 Press (SOURCE) to select a source
(tuner, CD, or MD).
2 Press (SOUND) repeatedly until BAL
appears.
3 Press < or , to adjust the balance.
After 3 seconds, the display returns to the
normal playback mode.
Adjusting the bass (CDX-
M670/M620 only)
You can adjust the bass from the speakers.
1 Press (SOURCE) to select a source
(tuner, CD, or MD).
2 Press (SOUND) repeatedly until BAS
appears.
3 Press < or , to adjust the balance.
After 3 seconds, the display returns to the
normal playback mode.
Display
window
Centre of sound
field
POS
ALL
Normal setting
(1 + 2 + 3 )
POS
Front
Front part
(1 + 2)
POS
Front-R
Right front (2)
POS
Front-L
Left front (1)
POS
Rear
Rear part (3)
POS
off
Cancel
1
2
3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108

Sony CDX-M620 Manuel utilisateur

Catégorie
Récepteurs multimédia de voiture
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues