Robustel R5020 Lite Hardware Manual Manuel utilisateur

Robustel
Marque
Robustel
Modèle
R5020 Lite Hardware Manual
Catégorie
Les routeurs
Taper
Manuel utilisateur
Robustel R5020 Lite Hardware Manual
RT098_HM_R5020_Lite 1/11
R5020 Lite
Hardware Manual
Version: 1.0.1
Date: Feb. 27, 2023
Robustel R5020 Lite Hardware Manual
RT098_HM_R5020_Lite 2/11
Regulatory and Type Approval Information
Table 1: Toxic or Hazardous Substances or Elements with Defined Concentration Limits
Radio Specifications for Europe
RF technologies
3G, 4G, 5G, Wi-Fi
Cellular Frequency*
5G: NR SA/NSA: n1/n2/n3/n5/n7/n8/n12/n13/n14/n18/n20/n25/
n26/n28/n29/n30/n38/n40/n41/n48/n66/ n71/n75/n76/n77/n78/n79
4G: LTE FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B17/B18/
B19/B20/B25/B26/B28/B29/B30/B32/B66/B71
LTE TDD: B34/B38/B39/B40/B41/B42/B43/B48
LAA: B46 (only supports 2 x 2 MIMO)
3G: WCDMA: B1/B2/B4/B5/B8/B19
Wi-Fi Frequency
2.4 GHz: 2.412 - 2.472 GHz
5 GHz: 5.150 - 5.825 GHz
Max RF power
23 dBm ± 2dB@NR, 23 dBm ± 2dB@LTE, 23 dBm ± 2dB@WCDMA, 18 dBm ± 2dB@Wi-Fi
*May vary on difference models.
Note: Operation of 5150 ~ 5250 MHz frequency range is restricted to indoor use only.
Name of
the Part
Hazardous Substances
(Pb)
(Hg)
(Cd)
(Cr(VI))
(PBDE)
(DEHP)
(BBP)
(DBP)
(DIBP)
Metal
parts
o
o
o
o
-
-
-
-
-
Circuit
modules
o
o
o
o
o
o
o
o
o
Cables and
cable
assemblies
o
o
o
o
o
o
o
o
o
Plastic and
polymeric
parts
o
o
o
o
o
o
o
o
o
o:
Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is
below the limit requirement in RoHS2.0.
X:
Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials for this
part might exceed the limit requirement in RoHS2.0.
-:
Indicates that it does not contain the toxic or hazardous substance.
Robustel R5020 Lite Hardware Manual
RT098_HM_R5020_Lite 3/11
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s) and Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the
device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation,
Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC& IC Radiation Exposure Statement
This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your
body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Déclaration d’IC sur l’exposition aux radiations
Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada pour des
environnements non contrôlés. Cet équipement doit être installé et utilisé à une distance minimum de 20 cm entre
l’antenne et votre corps.
Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre émetteur.
Robustel R5020 Lite Hardware Manual
RT098_HM_R5020_Lite 4/11
Simplified EU Declaration of Conformity
We, Guangzhou Robustel Co., Ltd. are located at 501, Building #2, 63 Yongan Road, Huangpu District, Guangzhou,
China, declare that this radio equipment complies with all applicable EU directives. The full text of the EU DoC is
available at the following internet address:
www.robustel.com/certifications/
Safety Information
General
- The router generates radio frequency (RF) power. When using the router, care must be taken on safety issues
related to RF interference as well as regulations of RF equipment.
- Do not use your router in aircraft, hospitals, petrol stations or in places where using cellular products is prohibited.
- Be sure that the router will not be interfering with nearby equipment. For example: pacemakers or medical
equipment. The antenna of the router should be away from computers, office equipment, home appliance, etc.
- An external antenna must be connected to the router for proper operation. Only uses approved antenna with the
router. Please contact authorized distributor on finding an approved antenna.
RF Exposure
- This device meets the official requirements for exposure to radio waves. This device is designed and manufactured
not to exceed the emission limits for exposure to radio frequency (RF) energy set by authorized agencies.
- The device must be used with a minimum separation of 20 cm from a person’s body to ensure compliance with RF
exposure guidelines. Failure to observe these instructions could result in your RF exposure exceeding the applicable
limits.
Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open.
Router may be used at this time.
The symbol indicates that the product should not be mixed with general household waste but must be sent to
separate collection facilities for recovery and recycling.
The symbol indicates that the product meets the requirements of the applicable EU directives.
The symbol indicates that the product meets the requirements of the relevant UK legislation.
Related download link
Find more product documents or tools at:
www.robustel.com/en/documentations/
Robustel R5020 Lite Hardware Manual
RT098_HM_R5020_Lite 5/11
Technical Support
Tel: +86-20-82321505
Email: support@robustel.com
Web: www.robustel.com
Document History
Updates between document versions are cumulative. Therefore, the latest document version contains all updates
made to previous versions.
Date
Firmware Version
Document Version
Change Description
Nov. 23, 2022
5.0.0
1.0.0
Initial release.
Feb 27, 2023
5.0.0
1.0.1
Optimized image display of mounting kit.
Robustel R5020 Lite Hardware Manual
RT098_HM_R5020_Lite 6/11
Overview
The R5020 Lite is Robustel’s new 5G capable router supporting global 5G, 4G and 3G bands. The R5020 Lite
leverages our tried and tested high performance CPU platform and it is compatible with 3GPP Release 16.
Package Checklist
Before commencing installation ensure your package has the following components:
Device
2-PIN Terminal
Block
3-PIN Terminal
Block
Mounting Kit
RCMS Card
Quick Start Guide
Card
Power Supply
(Optional)
Cellular Antenna
(Optional)
Wi-Fi Antenna
(Optional)
Note: The accessories could be different on specific order.
Panel Layout (May Vary on Different Models)
Robustel R5020 Lite Hardware Manual
RT098_HM_R5020_Lite 7/11
Interface Descriptions
1. LED Indicator
Name
Color
Status
Description
RUN
Green
Fast Blinking
(250ms)
Router is preparing (system initialization)
On, blinking
(500ms)
Router starts operating
Off
Router is powered off
MDM
Green
On, solid
Link connection is working
On, blinking
Data is sent and received
Off
Link connection is not working
USR
USR-OpenVPN
Green
On, solid
OpenVPN connection is established
Off
OpenVPN connection is not established
USR-IPsec
Green
On, solid
IPsec connection is established
Off
IPsec connection is not established
USR-SIM
Green
On, solid
Using primary SIM card 1
On, blinking
Using backup SIM card 2
Off
Using WAN link (no SIM card inserted)
RSSI
Green
On, solid
5G network: Reference Signal Received Power greater than -86 dBm (Strong signal)
Non-5G network: Received Signal Strength Indication greater than -73 dBm (Strong signal)
On, blinking (1s)
5G network: Reference Signal Received Power -105 to -86 dBm (Moderate signal)
Non-5G network: Received Signal Strength Indication -91 to -73 dBm (Moderate signal)
Fast blinking
5G network: Reference Signal Received Power -140 to -106 dBm (Weak signal)
Non-5G network: Received Signal Strength Indication -111 to -93dBm (Weak signal)
--
Off
No signal
2.4G
Green
On, solid
2.4 GHz Wi-Fi is enabled and working properly
On, blinking
2.4 GHz Wi-Fi is working normally and there is data sending and receiving
Off
2.4 GHz Wi-Fi is disabled or not working properly
5G Wi-Fi
Green
On, solid
5 GHz Wi-Fi is enabled and working properly
On, blinking
5 GHz Wi-Fi is working normally and there is data sending and receiving
Off
5 GHz Wi-Fi is disabled or not working properly
Note: You can choose the display type of USR LED. For more details, please refer to
RT123_SM_RobustOS Software Manual, Services > Advanced > System >System Settings > User LED Type.
Robustel R5020 Lite Hardware Manual
RT098_HM_R5020_Lite 8/11
2. PIN Description
PIN
Description
Note
1
V+
Power Supply Positive
1 2
Note:
1) The input voltage is 12 to 36V DC.
2
V-
Power Supply Negative
3
TXD/A
RS232 Data Transmission/RS485_A, may vary on different
model.
345
4
RXD/B
RS232 Data Receive/RS485_B, may vary on different
model.
5
GND
Signal Ground
3. Reset Button
Feature
Operation
Reboot
Press and hold the RST button for 2~ 5 seconds under the operating status.
Restore to default
configuration
Press and hold the RST button for 5~10 seconds, the RUN LED starts blinking quickly, the router will restore to default
configuration.
Restore to factory
default settings
Once the operation of restoring default configuration is performed twice within one minute, the router will restore to factory
default settings.
Note: The more details please refer to RT123_SM_RobustOS Software Manual, 2.3 Factory Reset.
4. Ethernet Ports. There are two Ethernet ports on R5020 Lite, including ETH0, ETH1. The ETH0 on the router
can be configured as a WAN port, while ETH1 can only be configured as a LAN port. By default, ETH0, ETH1
are lan0, and their IP are 192.168.0.1/255.255.255.0.
Ethernet LED Indicator
Status
Description
Link indicator
(Yellow)
On, solid
Connection is established
On, blinking
Data is being transferred
Off
Connection is not established
Robustel R5020 Lite Hardware Manual
RT098_HM_R5020_Lite 9/11
Hardware Installation
1. SIM Card Installation. Remove the SIM card cover to insert the SIM cards into the device, then screw up the
cover.
2. Antenna Installation. Rotate the antenna into the antenna connector accordingly.
3. Terminal Block Installation. Insert the 3-PIN terminal blocks into the interfaces connector, then can connect
the devices or sensors to the gateway via corresponding interfaces.
4. Mounting Kit Installation.
- DIN Rail Mounting
- Wall Mounting
Robustel R5020 Lite Hardware Manual
RT098_HM_R5020_Lite 10/11
5. Grounding the Device. Grounding will help to prevent the noise effect due to electromagnetic interference
(EMI). Connect the device to the site ground wire by the grounding screw before powering on.
6. Connect the router to the computer. Connect the Ethernet cable to any port labeled ETH0 or ETH1 of the
router, and connect the other end of the cable to your computer.
Robustel R5020 Lite Hardware Manual
RT098_HM_R5020_Lite 11/11
Login to the Device
1. Connect the router’s Ethernet port to a PC with a
standard Ethernet cable.
2. Before logging in, manually configure the PC with
a static IP address on the same subnet as the
gateway address, click and configure "Use the
following IP address".
3. To enter the gateway's web interface, type
http://192.168.0.1 into the URL field of your
Internet browser.
4. Use login information shown in the product label
when prompted for authentication.
5. After logging in, the home page of the web
interface is displayed, then you can view system
information and perform configuration on the
device.
6. The automatic APN selection is ON by default, if
need to specify your own APN, please go to the
menu Interface->Link Manager->Link
Setting->WWAN Settings to finish the specific
setting.
7. The more configuration details please refer to
RT123_SM_RobustOS Software Manual.
(END)
Support: support@robustel.com
Website: www.robustel.com
©2023 Guangzhou Robustel Co.,Ltd.
All rights reserved. Subject to change without notice.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Robustel R5020 Lite Hardware Manual Manuel utilisateur

Robustel
Marque
Robustel
Modèle
R5020 Lite Hardware Manual
Catégorie
Les routeurs
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents