LG DLGX5781VE Le manuel du propriétaire

OWNER’S MANUAL

DRYER

Please read this owner’s manual thoroughly before operating and

keep it handy for reference at all times.

MFL67731048

ENGLISH FRANÇAIS

DLEX5780*E DLGX5781*E

www.lg.com

MFL67731048_en_171017.indd 1 2017.10.17 2:39:33 PM

2

TABLE OF CONTENTS

3

IMPORTANT SAFETY INSTRUCTIONS

3 WHAT TO DO IF YOU SMELL GAS

4 BASIC SAFETY PRECAUTIONS

5 GROUNDING INSTRUCTIONS

5 SAFETY INSTRUCTIONS FOR

INSTALLATION

7 SAFETY INSTRUCTIONS FOR CONNECTING

ELECTRICITY

8

PRODUCT FEATURES

9

INTRODUCING YOUR DRYER

9 Parts

9 Accessories

9 2-Way Reversible Door

9 Safety Tether Kit

10 Control Panel Features

11 Display

12

INSTALLATION INSTRUCTIONS

12 Preview Installation Order

13 Installation Location Requirements

13 Clearances

14 Leveling the Dryer

15 Reversing the Door

21 Installing the Side Vent Kit

22 Venting the Dryer

24 Connecting Gas Dryers

26 Connecting Electric Dryers

27 Special Requirements for Manufactured or

Mobile Homes

27 Final Installation Check

28 Installation Test (Duct Check)

30

HOW TO USE

30 Operating the Dryer

31 Sorting Loads

31 Loading the Dryer

31 Check the Lint Filter Before Every Load

32 Using the LG EasyLoad™

33 Cycle Guide

34 Cycle Settings and Options

34 Special Functions

35 Custom Program

35 Steam Functions

37 Steam Cycle Guide

38 Tag On

39 Using Tag On with Applications

45

MAINTENANCE

45 Regular Cleaning

46

TROUBLESHOOTING

46 Before Calling for Service

49

SPECIFICATIONS

50

USING SMART DIAGNOSIS™

51

WARRANTY

TABLE OF CONTENTS

MFL67731048_en_171017.indd 2 2017.10.17 2:39:33 PM

3

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

w

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric

shock, or to prevent property damage, injury to persons, or death.

Your safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all

safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word DANGER, WARNING, or CAUTION.

These words mean:

w

DANGER

You will be killed or seriously injured if you don’t immediately follow instructions.

w

WARNING

You can be killed or seriously injured if you don’t follow instructions.

w

CAUTION

You may be slightly injured or cause damage to the product if you do not follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell

you what can happen if the instructions are not followed.

• Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is

installed, it must be of a specific type identified by the appliance manufacturer as suitable for use with

clothes dryers. Flexible venting materials are known to collapse, be easily crushed, and trap lint. These

conditions will obstruct clothes dryer airflow and increase the risk of fire.

• Install the clothes dryer according to the manufacturer’s instructions and local codes.

• Save these instructions.

w

WARNING

FIRE OR EXPLOSION HAZARD

Failure to follow safety warnings exactly could result in serious injury, death or property damage.

- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

- WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use any phone in your building.

• Clear the room, building or area of all occupants.

• Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

• If you cannot reach your gas supplier, call the fire department.

- Installation and service must be performed by a qualified installer, service agency or the gas supplier.

w

IMPORTANT SAFETY INSTRUCTIONS

MFL67731048_en_171017.indd 3 2017.10.17 2:39:33 PM

4

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

w

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric

shock, or to prevent property damage, injury to persons, or death.

BASIC SAFETY PRECAUTIONS

w

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions,

including the following:

• Read all instructions before using the dryer.

• Before use, the dryer must be properly installed as

described in this manual.

• Do not place items exposed to cooking oils in your

dryer. Items contaminated with cooking oils may

contribute to a chemical reaction that could cause a

load to catch fire.

• Do not dry articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline, dry-

cleaning solvents, or other flammable or explosive

substances as they give off vapors that could ignite or

explode.

• Do not reach into the dryer if the drum or any other

part is moving.

• Do not repair or replace any part of the dryer

or attempt any servicing unless specifically

recommended in this owner’s manual or in published

user-repair instructions that you understand and have

the skills to carry out.

• Do not tamper with controls.

• Before the dryer is removed from service or discarded,

remove the door to the drying compartment.

• Do not allow children to play on or in the dryer. Close

supervision of children is necessary when the dryer is

used near children.

• Do not use fabric softeners or products to eliminate

static unless recommended by the manufacturer of

the fabric softener or product.

• Do not use heat to dry articles containing foam rubber

or similarly textured rubber-like materials.

• Keep area around the exhaust opening and adjacent

surrounding areas free from the accumulation of lint,

dust, and dirt.

• The interior of the dryer and exhaust vent should be

cleaned periodically by qualified service personnel.

• Do not install or store the dryer where it will be

exposed to the weather.

• Always check the inside of the dryer for foreign

objects.

• Clean lint screen before or after each load.

• Do not store plastic, paper, or clothing that may

burn or melt on top of the dryer during operation.

• Be careful when opening and closing the door.Fingers

and hands can get caught in the door and cause injury

if the door drops forward unexpectedly.

• Do not place heavy items on or lean against the top

of the door when it is open.

• Do not attempt to pull the hamper door open more

than 40 degrees.

• The dryer could tip forward, causing injury or damage.

• Do not place items on the top of the dryer.

IMPORTANT SAFETY INSTRUCTIONS

MFL67731048_en_171017.indd 4 2017.10.17 2:39:34 PM

5

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

w

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric

shock, or to prevent property damage, injury to persons, or death.

GROUNDING INSTRUCTIONS

w

WARNING

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a

qualified electrician or service person if you are in doubt that the appliance is properly grounded.

SAFETY INSTRUCTIONS FOR INSTALLATION

w

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions,

including the following:

• Properly ground dryer to conform with all

governing codes and ordinances. Follow details in

the installation instructions. Electric shock can result if

the dryer is not properly grounded.

• Before use, the dryer must be properly installed as

described in this manual. Electric shock can result if

the dryer is not properly grounded.

• Install and store the dryer where it will not be

exposed to temperatures below freezing or

exposed to the weather.

• All repairs and servicing must be performed

by an authorized servicer unless specifically

recommended in this owner’s manual. Use only

authorized factory parts. Failure to follow this

warning can cause serious injury, fire, electric shock, or

death.

• To reduce the risk of electric shock, do not install

the dryer in humid spaces. Failure to follow this

warning can cause serious injury, fire, electric shock, or

death.

• Connect to a properly rated, protected, and sized

power circuit to avoid electrical overload. Improper

power circuit can melt, creating electric shock and/or

fire hazard.

• Remove all packing items and dispose of all

shipping materials properly. Failure to do so can

result in death, explosion, fire, or burns.

• Place dryer at least 18 inches above the floor for

a garage installation. Failure to do so can result in

death, explosion, fire, or burns.

• Keep all packaging from children. Packaging

material can be dangerous for children. There is a risk

of suffocation.

• Do not install near another source of heat such as

a stove, cooking oven. Failure to do so can cause

deform, smoke and fire.

• Do not place candles, smoking materials, or other

flammables on top of the product. Dripping wax,

smoke, or fire can result.

• Remove all protective vinyl film from the product.

Failure to do so can cause product damage, smoke or

fire.

This appliance must be grounded. In the event of

malfunction or breakdown, grounding will reduce

the risk of electric shock by providing a path of least

resistance for electric current. This appliance must be

equipped with a cord having an equipment-grounding

conductor and a grounding plug. The plug must be

plugged into an appropriate outlet that is properly

installed and grounded in accordance with all local

codes and ordinances.

Do not modify the plug provided with the appliance. If

it will not fit the outlet, have a proper outlet installed by

a qualified electrician.

This appliance must be connected to a grounded metal,

permanent wiring system or an equipment-grounding

conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or

lead on the appliance.

Electric shock can result if the dryer is not properly

grounded.

IMPORTANT SAFETY INSTRUCTIONS

MFL67731048_en_171017.indd 5 2017.10.17 2:39:34 PM

6

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

w

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric

shock, or to prevent property damage, injury to persons, or death.

SAFETY INSTRUCTIONS FOR INSTALLATION

w

WARNING

To reduce the risk of injury to persons, follow all industry recommended safety procedures including the use of long

sleeved gloves and safety glasses. Failure to follow all of the safety warnings in this manual could result in property

damage, injury to persons, or death.

Exhaust/Ducting:

• Gas dryers MUST be exhausted to the outside.

Failure to follow these instructions can result in fire or

death.

• The dryer exhaust system must be exhausted

to the outside of the dwelling. If the dryer is not

exhausted outdoors, some fine lint and large

amounts of moisture will be expelled into the

laundry area. An accumulation of lint in any area of

the home can create a health and fire hazard.

• Use only rigid metal or flexible metal 4-inch

diameter ductwork inside the dryer cabinet or for

exhausting to the outside. Use of plastic or other

combustible ductwork can cause a fire. Punctured

ductwork can cause a fire if it collapses or becomes

otherwise restricted in use or during installation.

• Ductwork is not provided with the dryer, and you

should obtain the necessary ductwork locally. The

end cap should have hinged dampers to prevent

backdraft when the dryer is not in use. Failure to

follow these instructions can result in fire or death.

• The exhaust duct must be 4 inches (10.2 cm) in

diameter with no obstructions. The exhaust duct

should be kept as short as possible. Make sure

to clean any old ducts before installing your new

dryer. Failure to follow these instructions can result in

fire or death.

• Rigid or semi-rigid metal ducting is recommended

for use between the dryer and the wall. In special

installations when it is impossible to make a

connection with the above recommendations, a UL-

listed flexible metal transition duct may be used

between the dryer and wall connection only. The

use of this ducting will affect drying time. Failure to

follow these instructions can result in fire or death.

• DO NOT use sheet metal screws or other fasteners

which extend into the duct that could catch lint and

reduce the efficiency of the exhaust system. Secure

all joints with duct tape. For complete details, follow

the Installation Instructions. Failure to follow these

instructions can result in fire or death.

w

WARNING

Fire Hazard

Failure to follow safety warnings exactly could result

in serious injury, death or property damage.

Do not install a booster fan in the exhaust duct.

Install all clothes dryers in accordance with the

installation instructions of the manufacturer of the

dryer.

IMPORTANT SAFETY INSTRUCTIONS

MFL67731048_en_171017.indd 6 2017.10.17 2:39:34 PM

7

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

w

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric

shock, or to prevent property damage, injury to persons, or death.

SAFETY INSTRUCTIONS FOR CONNECTING ELECTRICITY

w

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions,

including the following:

SAVE THESE INSTRUCTIONS

• Do not, under any circumstances, cut or remove

the ground prong from the power cord. To prevent

injury to persons or damage to the dryer, the electrical

power cord must be plugged into a properly grounded

outlet.

• For personal safety, this dryer must be properly

grounded. Failure to do so can result in electric shock

or injury.

• Refer to the installation instructions in this manual

for specific electrical requirements for your model.

Failure to follow these instructions can create an

electric shock hazard and/or a fire hazard.

• This dryer must be plugged into a properly

grounded outlet. Electric shock can result if the

dryer is not properly grounded. Have the wall

outlet and circuit checked by a qualified electrician

to make sure the outlet is properly grounded.

Failure to follow these instructions can create an

electric shock hazard and/or a fire hazard.

• The dryer should always be plugged into its own

individual electrical outlet which has a voltage

rating that matches the rating plate. This provides

sparkling performance and also prevents overloading

house wiring circuits which could cause a fire hazard

from overheated wires.

• Never unplug your dryer by pulling on the power

cord. Always grip plug firmly and pull straight out

from the outlet. The power cord can be damaged,

resulting in a risk of fire and electric shock.

• Repair or replace immediately all power cords that

have become frayed or otherwise damaged. Do not

use a cord that shows cracks or abrasion damage

along its length or at either end. The power cord can

melt, creating an electric shock and/or fire hazard.

• When installing or moving the dryer, be careful not

to pinch, crush, or damage the power cord. This will

prevent injury and prevent damage to the dryer from

fire and electric shock.

IMPORTANT SAFETY INSTRUCTIONS

MFL67731048_en_171017.indd 7 2017.10.17 2:39:34 PM

8

PRODUCT FEATURES

EASY-TO-USE CONTROL PANEL

Rotate the cycle selector knob to select the desired dry cycle. Add cycle options or adjust settings with the touch

of a button.

2-WAY EASY-ACCESS REVERSIBLE DOOR

The LG EasyLoad™ can be tilted open from the top, hamper-style, allowing you to easily load the dryer without

items falling on the floor. The door still swings open to provide easy access for unloading or loading of bulkier

items. The door hinge can be reversed to adjust for installation location.

STEAM FUNCTIONS

LG’s steam technology allows you to inject fabrics with a swirling jet of hot steam to refresh clothes, reduce static,

and make ironing easier. Simply select the Steam Fresh™ cycle, or you can add a Steam option to selected cycles.

Flow Sense™ DUCT BLOCKAGE SENSING SYSTEM INDICATOR

The Flow Sense™ duct blockage sensing system detects and alerts you to restrictions in the installed household

ductwork that reduce exhaust airflow through the dryer. If you see the alert: Clean or repair the ducts to remove

the restrictions. Keep your ducts clean to help increase efficiency and reduce long drying times caused by blocked

ducts.

Smart Diagnosis™

Should you experience any technical difficulty with your washing machine, it has the capability of transmitting

data by phone to the Customer Information Center. The call center agent records the data transmitted from your

machine and uses it to analyze the issue, providing a fast and effective diagnosis.

Tag On

The Tag On feature works on most smart phones equipped with the NFC function and based on the Android

operating system (OS).

Using the “LG Smart Laundry” application, the Tag On feature will allow you to diagnose your appliance, download

new cycles, and see the status of your appliance by simply touching the smartphone to the Tag On logo of the

appliance.

Protocol P154

Sanitization Performance of

Residential Clothes dryer

C

E

R

T

I

F

I

E

D

E

S

I

G

N

PRODUCT FEATURES

MFL67731048_en_171017.indd 8 2017.10.17 2:39:35 PM

9

ENGLISH

INTRODUCING YOUR DRYER

Parts

Control

panel

Leveling

feet

Reversible

door

Lint filter

Power Cord

Location

(Electric

Models)

Gas

connection

location

(Gas models)

Power cord

location

(Gas

models)

Exhaust

duct

outlet

NOTE

• Contact LG Customer Service at 1-800-243-0000 (1-888-542-2623 in Canada) if any accessories are missing.

• For your safety and for extended product life, use only authorized components. The manufacturer is not

responsible for product malfunction or accidents caused by the use of separately purchased unauthorized

components or parts.

• The images in this owner’s manual may be different from the actual components and accessories, and are

subject to change by the manufacturer without prior notice for product improvement purposes.

INTRODUCING YOUR DRYER

Accessories 2-Way Reversible Door

Included Accessories

Drying rack

Part No.

3750EL0001C

Side vent kit

(sold separately)

Kit No.

383EEL9001B

Release

Hamper door

The LG EasyLoad™ feature allows you to open the dryer

door from the top, hamper-style, when loading the

dryer to help guide clothes into the drum and prevent

them from falling onto the floor. When unloading the

dryer or loading bulkier items, use the swing door for

easy access to the drum. For more details on using the

door, see page 32. For information on reversing the

door swing, see page 15.

Swing door

Optional Accessories

Safety Tether Kit

This optional kit helps prevent the dryer tipping if children climb on the door or if someone should fall onto the door. It is

recommended that you install this kit, depending on your situation, but it is not required. Follow the customer installation

instructions included with the kit to properly install the kit. If you do not install the kit, store it out of reach of children.

MFL67731048_en_171017.indd 9 2017.10.17 2:39:39 PM

10

Control Panel Features

Following are instructions for starting and using your new dryer. Please refer to specific sections of this manual for

more detailed information.

w

WARNING

To reduce the risk of fire, electric shock, or injury to persons, read this entire manual, including the Important Safety

Instructions, before operating this dryer.

Button Description

• Power On/Off Button

- Press to turn the dryer On. Press again to turn the dryer Off.

NOTE : Pressing the On/Off button during a cycle will cancel that cycle and any

load settings will be lost.

• Cycle Selector Knob

- Turn this knob to select the desired cycle. Once the desired cycle has been

selected, the standard presets will be shown in the display. On Manual Dry

cycles, these settings can be adjusted using the cycle setting buttons anytime

before starting the cycle.

• Start/Pause Button

- Press this button to Start the selected cycle. If the dryer is running, use this

button to Pause the cycle without losing the current settings.

NOTE : If you do not press the Start/Pause button to resume a cycle within 4

minutes, the dryer turns off automatically.

• More Time/Less Time Buttons

- To adjust the drying time, use these buttons with Manual Dry, Time Dry, and

Steam Fresh™ cycles, as well as the Reduce Static and Easy Iron options. Press

the More Time button to increase the selected manual cycle time by a minute;

press Less Time to decrease the cycle time by a minute.

• Cycle Setting Buttons

- Use these buttons to select the desired cycle settings for the selected cycle. The

current settings are shown in the display. Press the button for that option to

view and select other settings.

• Option Buttons

- The Option buttons allow you to select additional cycle options. Certain buttons

also allow you to activate special functions by pressing and holding the button

for 3 seconds.

• Steam Functions

- LG’s steam technology allows you to inject fabrics with a swirling jet of hot

steam to refresh clothes, reduce static, and make ironing easier. Simply select

the Steam Fresh™ cycle, or you can add a Steam option to selected cycles.

Operation

INTRODUCING YOUR DRYER

MFL67731048_en_171017.indd 10 2017.10.17 2:39:48 PM

11

ENGLISH

Display

The display shows the settings, estimated time remaining, options, and status messages for your dryer. When the

dryer is turned on, the light in the display will illuminate.

w

WARNING

To reduce the risk of fire, electric shock, or injury to persons, read this entire manual, including the Important Safety

Instructions, before operating this dryer.

Button Description

• Estimated Time Remaining

- When the Start/Pause button is pressed, the dryer will display the estimated

(Sensor Dry) or set time (Time Dry) remaining, and begin tumbling.

NOTE : The cycle time on Sensor Dry cycles may fluctuate as the dryer

recalculates drying time for optimal results

• Cycle Completion Indicator With Check Filter Reminder

- This portion of the display shows which stage of the drying cycle is currently

underway (Clean Filter, Drying, or Cooling).

• Child Lock Indicator

- When Child Lock is set, the Child Lock indicator will appear and all buttons

are disabled except the Power button. This prevents children from changing

settings while the dryer is operating

• Clean Filter Reminder

- The display will show Clean Filter when the dryer is turned on as a reminder to

check the filter. It turns off when the Start/Pause button is pressed.

• Custom Program

- If you have a special combination of settings that you use frequently, you can

save these settings as a Custom Program.

• Flow Sense™ Duct Blockage Sensing System Indicator

- The Flow Sense™ duct blockage sensing system detects and alerts you to

blockages in the ductwork that reduce exhaust flow from the dryer. This

improves operating efficiency and helps minimize service calls, saving your

money.

INTRODUCING YOUR DRYER

MFL67731048_en_171017.indd 11 2017.10.17 2:39:56 PM

12

INSTALLATION INSTRUCTIONS

Preview Installation Order

Checking and choosing the

proper location

Leveling the dryer Venting the dryer

Plugging in the power cord

and grounding

Connecting gas dryers

Test run

Installation test

(Refer to page 28.)

Press and hold

120V

240V(USA)

230V(CANADA)

INSTALLATION INSTRUCTIONS

MFL67731048_en_171017.indd 12 2017.10.17 2:39:58 PM

13

ENGLISH

Installation Location Requirements

w

WARNING

Read all installation instructions completely before installing and operating your dryer! It is important that

you review this entire manual before installing and using your dryer. Detailed instructions concerning electrical

connections, gas connections, and exhaust requirements are provided on the following pages.

Do not operate your dryer at temperatures below 45°F (7°C). At lower temperatures, the dryer might not shut off

at the end of an automatic cycle. This can result in longer drying times. The dryer must not be installed or stored in

an area where it will be exposed to water and/or weather. Check code requirements. Some codes limit, or do not

permit, installation of the dryer in garages, closets, mobile homes or sleeping quarters. Contact your local building

inspector.

Clearances

Installation Spacing For Recessed Area Or Closet Installation

The following spacing dimensions are recommended for this dryer. This dryer has been tested for spacing of

1 inch(2.54cm) clearance on the sides and rear. Recommended spacing should be considered for the following

reasons:

• A location that allows for proper exhaust installation. A

gas dryer must be exhausted to the outdoors.

See Venting the dryer.

• A grounded electrical outlet located within 2 ft.

(61 cm) of either side of the dryer. See Connecting

electric dryers.

• A sturdy floor to support the total dryer weight of 200

lbs (90.7 kg). The combined weight of a companion

appliance should also be considered.

• No other fuel-burning appliance can be installed in the

same closet as a dryer.

• Additional spacing should be considered for ease of

installation and servicing.

• Additional clearances might be required for wall, door

and floor moldings.

• Additional spacing should be considered on all sides

of the dryer to reduce noise transfer.

For closet installation, with a door, minimum

ventilation openings in the top and bottom of the

door are required. Louvered doors with equivalent

ventilation openings are acceptable.

• Companion appliance spacing should also be

considered.

NOTE

• A level floor with a maximum slope of 1 inch (2.5 cm) under entire dryer. If slope is greater than 1 inch (2.5 cm),

install the Extended Dryer Feet Kit. Clothes may not tumble properly, and automatic sensor cycles may not

operate correctly if dryer is not level.

• For a garage installation, you will need to place the dryer at least 18 inches (46 cm) above the floor. If using a

pedestal, you will need 18 inches (46 cm) to the bottom of the dryer.

NOTE

There should be at least a little space around the dryer (or any other appliance) to eliminate the transfer of

vibration from one to the other. Too much vibration, it could cause them to make noise or touch each other

causing paint damage and making even more noise.

30"

(76,1 cm)

5"**

(12,7 cm)

1"**

(2,5 cm)

1"

(2,5 cm)

1"

(2,5 cm)

27"

(68,6 cm)

9"**

(22,9 cm)

7"* (17,8 cm)

1"* (2,5 cm)

5

"**

(14 cm)

1/2

77

1/2

"

(196,8 cm)

3"* (7,6 cm)

6"*(15,2 cm)

3"* (7,6 cm)

27"

(68,6 cm)

1"

(2,5 cm)

1"

(2,5 cm)

24 in.

2*

(155 cm

2

)

48 in.

2*

(310 cm

2

)

5

"

**

(12.7 cm)

14

"

max.*

(35.6

cm)

50

1

⁄

4

"

(127.5 cm)

21

1

⁄4

"

(54 cm)

45

7

⁄16

"

(115.3 cm)

Closet Door Vent

Requirements

5

"

**

(12,7 cm)

14

"

max.*

(35,6

cm)

50

1

⁄

4

"

(127,5 cm)

21

1

⁄4

"

(54 cm)

45

7

⁄16

"

(115,3 cm)

Requisitos de ventilación

de la puerta del armario

(2,54 cm) (2,54 cm)

(7,6 cm)

(7.6 cm)

(68,6 cm)

(2.54 cm) (2.54 cm)(68.6 cm)

7"* (17.8 cm)

5"*

(12.7 cm)

1"*

(2.5 cm)

27"

(68.6 cm)

1"

(2.54 cm)

1"

(2.54 cm)

7"* (17,8 cm)

5"*

(12,7 cm)

1"*

(2,5 cm)

27

"

(68,6 cm)

1"

(2,54 cm)

1"

(2,54 cm)

5

"

**

(12,7 cm)

14

"

max.*

(35,6

cm)

50

1

⁄

4

"

(127,5 cm)

21

1

⁄4

"

(54 cm)

45

7

⁄16

"

(115,3 cm)

Exigences d'aération de

la porte du placard

(2,54 cm) (2,54 cm)

(7,6 cm)

(68,6 cm)

29

1

⁄

2

"

(75.0 cm)

29

1

⁄2

"

(75,0 cm)

29

1

⁄2

"

(75,0 cm)

29

1

/2"

(75.0 cm)

29

1

/2"

(75,0 cm)

INSTALLATION INSTRUCTIONS

MFL67731048_en_171017.indd 13 2017.10.17 2:40:1 PM

14

Clearances (cont.)

Recommended Installation Spacing For Cabinet Installation

• For cabinet installation with a door, minimum ventilation openings in the top of the cabinet are required.

*Required spacing

**For side or bottom venting,

2 inches (5.1 cm) spacing is allowed.

Leveling the Dryer

w

WARNING

• To reduce the risk of injury to persons, adhere to all

industry recommended safety procedures including

the use of long sleeved gloves and safety glasses.

Failure to follow this warning can cause serious injury

or death.

• The appliances are heavy. Two or more people are

required when installing the dryer. Failure to follow

this warning can cause serious injury or death.

To ensure that the dryer provides optimal drying

performance, it must be level. To minimize vibration,

noise, and unwanted movement, the floor must be a

perfectly level, solid surface.

1. Position the dryer in the final location. Place a level

across the top of the dryer.

• All four leveling feet must rest solidly on the floor.

Gently push on the top corners of the dryer to make

sure that the dryer does not rock from corner to corner.

If you are installing the dryer on the optional pedestal,

you must use the leveling feet on the pedestal to

level the dryer. The dryer leveling feet should be fully

retracted.

2. Use an adjustable wrench to turn the leveling feet.

Turn clockwise to raise the dryer or counterclockwise

to lower it. Raise or lower the leveling feet until dryer

is level from side to side and front to back.

Make sure that all 4 leveling feet are in firm contact with

the floor.

Level

Leveling Feet

NOTE

Adjust the leveling feet only as far as necessary to

level the dryer. Extending the leveling feet more than

necessary can cause the dryer to vibrate.

30"

(76,1 cm)

5"**

(12,7 cm)

1"**

(2,5 cm)

1"

(2,5 cm)

1"

(2,5 cm)

27"

(68,6 cm)

9"**

(22,9 cm)

7"* (17,8 cm)

1"* (2,5 cm)

5

"**

(14 cm)

1/2

77

1/2

"

(196,8 cm)

3"* (7,6 cm)

6"*(15,2 cm)

3"* (7,6 cm)

27"

(68,6 cm)

1"

(2,5 cm)

1"

(2,5 cm)

24 in.

2*

(155 cm

2

)

48 in.

2*

(310 cm

2

)

5

"

**

(12.7 cm)

14

"

max.*

(35.6

cm)

50

1

⁄

4

"

(127.5 cm)

21

1

⁄4

"

(54 cm)

45

7

⁄16

"

(115.3 cm)

Closet Door Vent

Requirements

5

"

**

(12,7 cm)

14

"

max.*

(35,6

cm)

50

1

⁄

4

"

(127,5 cm)

21

1

⁄4

"

(54 cm)

45

7

⁄

16

"

(115,3 cm)

Requisitos de ventilación

de la puerta del armario

(2,54 cm) (2,54 cm)

(7,6 cm)

(7.6 cm)

(68,6 cm)

(2.54 cm) (2.54 cm)(68.6 cm)

7"* (17.8 cm)

5"*

(12.7 cm)

1"*

(2.5 cm)

27"

(68.6 cm)

1"

(2.54 cm)

1"

(2.54 cm)

7"* (17,8 cm)

5"*

(12,7 cm)

1"*

(2,5 cm)

27

"

(68,6 cm)

1"

(2,54 cm)

1"

(2,54 cm)

5

"

**

(12,7 cm)

14

"

max.*

(35,6

cm)

50

1

⁄

4

"

(127,5 cm)

21

1

⁄4

"

(54 cm)

45

7

⁄16

"

(115,3 cm)

Exigences d'aération de

la porte du placard

(2,54 cm) (2,54 cm)

(7,6 cm)

(68,6 cm)

29

1

⁄

2

"

(75.0 cm)

29

1

⁄2

"

(75,0 cm)

29

1

⁄2

"

(75,0 cm)

29

1

/2"

(75.0 cm)

29

1

/2"

(75,0 cm)

INSTALLATION INSTRUCTIONS

MFL67731048_en_171017.indd 14 2017.10.17 2:40:3 PM

15

ENGLISH

Before you begin

The door reversal procedure consists of four main parts:

• Removing and reinstalling the door and hinges (steps

1, 2 and 20)

• Removing and reversing components on the dryer

cabinet (step 3)

• Removing and reversing components on the door

cover (steps 4 and 5)

• Removing and reversing components inside the door

(steps 6 through 19).

Tools Required

• Phillips screwdriver

• Large flat blade screwdriver (recommended for hinge

screws if they are tight or your Phillips screwdriver is

worn)

• Small flat blade screwdriver (for lifting out parts)

w

WARNING

• To avoid damage to the dryer or the door, support

the door with a stool or box that fits under the door,

or have an assistant support the weight of the door.

• Avoid dropping the door to avoid damage to the

door or the floor.

• Unplug the dryer or turn off power at the main

circuit breaker before beginning door reversal.

• THE DRYER DOOR IS VERY LARGE AND HEAVY.

Failure to follow the instructions below can result in

damage to the dryer, property damage or personal

injury.

Instructions

NOTE

The door reversal procedure for the two-way door

is far more complex than for a conventional dryer

door. It is recommended that you read through these

instructions in their entirety before beginning the

process, in order to gauge whether you prefer to have

the procedure done by a professional installer or

service person.

NOTE

The instructions here are for changing the door swing

from a right to a left side hinge. If the door has been

reversed, and it is necessary to change it back, use

care when following these instructions. Some of

the illustrations and the left/right references will be

reversed, and you will need to read the instructions

carefully.

w

WARNING

Be sure to support the weight of the door before

removing the hinge screws.

1. Open the door from the side so that the hinge

screws are accessible.

2. Remove the four hinge screws.

While supporting the door, remove the four hinge

screws, two from each hinge. Set the door aside face

down on a protected surface to prevent damage to

the door or the work surface.

3. Reverse the components on the cabinet.

a. Use a Phillips screwdriver to remove the two screws

and the latch mechanism on the front panel of the

cabinet.

b. Remove the latch hole cover by gently prying it

up with a flat blade screwdriver, being careful not

to scratch the paint. Install the latch hole cover on

the opposite side, where the latch mechanism was

removed. Install the latch mechanism in the position

from which you removed the latch hole cover, using

the two screws removed in step a.

c. Remove the hinge cover by gently prying it up with

a flat blade screwdriver, being careful not to scratch

the paint. Rotate the hinge cover 180 degrees and

install it on the opposite side, where the upper hinge

was attached.

Reversing the Door

Two large

screws

Two small

screws

INSTALLATION INSTRUCTIONS

upper

hinge

cover

latch hole

cover

latch

mechanism

hinge

bracket

hinge

MFL67731048_en_171017.indd 15 2017.10.17 2:40:5 PM

16

INSTALLATION INSTRUCTIONS

d. Reverse the hinge and the hinge bracket at the

bottom of the cabinet. Remove the two screws from

the hinge bracket at bottom right and remove the

hinge bracket.

Remove the lower of the two

screws behind the hinge

bracket. Do NOT remove the

upper screw behind the hinge

bracket. Set the parts aside.

e. Remove the three screws on the

hinge at bottom left. Remove the

hinge and reinstall it on the right

side. The top screw occupies the

hole where you removed the screw

behind the hinge bracket in step d.

f. Install the hinge bracket removed in step d on the

bottom left side, first installing one screw behind the

hinge bracket.

NOTE

Do NOT remove any of the eight screws on the face of

the cabinet (marked with

below). Doing so could

result in damage to the dryer and the need for a

service call to repair the dryer.

ON THE DOOR:

4. Lift off the door cover.

With the door laid inside facing up on a protected

surface, remove the 12 screws on the inside of the

door. Carefully lift off the door cover with the help of

a small flat blade screwdriver inserted in the upper

corner (circled below).

w

WARNING

The edges of the door cover may be sharp. Take care

when handling, or wear gloves to avoid injury.

5. Switch the door strike and the blank cover.

Remove the four screws on the door cover that secure

the door strike and the blank cover.

Switch the door strike and the blank cover, installing

them on the opposite sides from which they were

removed.

Gently pry out the hole plug on the side of the door

cover and install it in the hole on the opposite side.

Set the door cover aside.

Reversing the Door (cont.)

upper

hinge

cover

latch hole

cover

latch

mechanism

hinge

bracket

hinge

twelve screws

long screw

short

screws

blank cover door strike

hole plug

Hole

plug

interlock

button

MFL67731048_en_171017.indd 16 2017.10.17 2:40:8 PM

17

ENGLISH

Reversing the Door (cont.)

INSTALLATION INSTRUCTIONS

Inner Structure of Door

(before reversing - right hinge swing)

Top interlock buttons

upper hinge

assembly

upper hinge

pivot

glass

lower

hinge

assembly

lower

hinge

bracket

lower hinge

filler

upper hinge

filler

bumpers

top lock rod

side lock rod

inner lock rods

interlock buttons

inner lock rods

lower hinge filler

lower hinge bracket

side lock rod

Hole plug

top lock rod

lower hinge assembly

6. Reverse the components inside the door.

You will now be removing and reversing various components inside the door. See below for a detailed diagram

and identification of the inner structure and parts of the door. (The diagram shows the “before view” of the door,

with the default set-up for a right side hinge swing. After following these instructions, your door should be a

mirror image of the illustration.)

Side Interlock button

MFL67731048_en_171017.indd 17 2017.10.17 2:40:14 PM

18

INSTALLATION INSTRUCTIONS

b. While sliding the lock rod right, lift the right end up

and out of the guides.

11. Remove the upper hinge pivot.

Once the top lock rod has been removed, the

hinge pivot can easily be removed from the hinge

assembly on the upper left and set aside.

12. Reverse the upper hinge assembly and hinge

filler.

Lift out the upper hinge filler (on the right) and set it

aside.

Carefully lift the upper hinge assembly (on the left)

out of the outer door frame, using a small flat blade

screwdriver if necessary. Rotate the hinge assembly

180 degrees and install it on the upper right side of

the outer door. You will need to press firmly to install

the hinge assembly.

The hinge pivot removed in step 11 will be installed

later.

Reversing the Door (cont.)

interlock buttons

side lock rod

NOTE

Do not remove the two inner lock rods (see page 17)

located underneath the top lock rod. They do NOT

need to be reversed

upper hinge

assembly

upper hinge

pivot

upper hinge assembly

upper hinge pivot

Spring

7. Lift out the two top interlock buttons.

Lift out the two grey interlock buttons from the top of

the outer door and set them aside for later use.

8. Lift out the grey interlock button in the side of the

door.

Make sure to remove the spring with the interlock

button and to keep the two together. Set the interlock

button aside. Do not confuse with interlock buttons

from the top of the outer door.

9. Remove the side lock rod.

Remove the side lock rod from

the lower hinge bracket by lifting

the top end of the rod and sliding

it toward the top of the door. The

spring should remain attached to

the lock rod. Set the lock rod aside.

10. Remove the top lock rod.

a. Slide the lock rod to the right to remove it from the

hinge assembly on the left side.

MFL67731048_en_171017.indd 18 2017.10.17 2:40:18 PM

19

ENGLISH

b. Rotate the lower hinge assembly 180 degrees and

install it on the right side using the two screws

removed in step a.

c. Flip over the lower hinge bracket and release the

tabs on the back locking the hinge filler to the hinge

bracket.

d. Rotate the hinge filler 180 degrees and snap it back

onto the FRONT of the hinge bracket facing in the

opposite direction.

e.

Mount the lower hinge bracket and the filler on the

left side of the door with the screw removed in step a.

15. Install the side lock rod.

Flip the side lock rod over and install it on the

opposite side. Insert the lower end into the left

hinge and lower the rod into the guides on the door

while compressing the spring inside the recess.

tabs

Now rotate the hinge filler 180 degrees and install it

on the upper left side of the door.

13. Reinstall the top lock rod.

Rotate the top lock rod (removed in step 10) 180

degrees end for end from its original position and

reinstall it. The spring should now be to the right of

center, with the spring on the side of the rod facing

the top of the door.

a. Insert the right end of the lock rod into the right

hinge assembly. Make sure the rod is aligned with

the guides in the door panel.

b. Lower the rod into position, sliding it to bypass the

center handle, making sure to align the lock rod

with the guides all the way across the door panel.

When released, the lock rod should slide completely

into the hinge assembly on the right. Slide the

lock rod back and forth to make sure it is correctly

positioned in the guides and slides easily.

14. Reverse the lower hinge bracket and hinge

assembly.

a.

Remove the screw from the lower hinge bracket (on

the right) and lift the hinge bracket out. Set it aside.

Remove the two screws from the lower hinge assembly

on the bottom left and lift the hinge assembly out.

Reversing the Door (cont.)

upper hinge filler

screw

INSTALLATION INSTRUCTIONS

lower hinge assembly

screws

MFL67731048_en_171017.indd 19 2017.10.17 2:40:23 PM

20

Make sure the top of the side lock rod is beside the top

lock rod and the two do not overlap each other, so the

two rods can interact correctly. If they are not aligned

properly, the door will not operate properly.

16. Reinstall the top interlock buttons.

Reinstall the top gray interlock buttons removed in

step 7, one on each side of the outer door panel.

17. Reinstall the side interlock button.

Reinstall the side interlock button removed in step 8.

Center the spring in the compartment and insert the

interlock button on top of it.

18. Reinstall the door cover.

Clean the glass on the door and door cover, if

necessary.

Make sure the three gray interlock buttons are

properly installed and that the top and side lock

rods are properly aligned where they meet. Carefully

lower the door cover into place, aligning the holes in

the cover with the interlock buttons on the top and

side and the bumpers on the bottom. Take care not

to dislodge the lock rods while mounting the door

cover. Once the door cover is in place, secure it with

the 12 screws removed in step 4.

The ten similar screws go around the top and sides

of the door cover. Make sure to install the two

different screws on the bottom edge, in the locations

marked below

19.

Now, pick up the upper hinge pivot removed earlier and

rotate it 180 degrees. Press in the side interlock button

on the left side and hold it down while you press the hinge

pivot into the hinge assembly on the top right side. If the

door has been reassembled correctly, the lock rod will slide

back easily and lock the pivot in place. The door is now

ready to remount on the opposite side of the dryer.

w

WARNING

Be sure to support the weight of the door before installing

the hinge screws.

20. Reinstall the door.

While supporting the door, install the four hinge screws

removed in step 2. Test the swing of the door to make sure

the hinges and latch are properly aligned and that the

door opens, closes and latches properly in both directions.

If the door doesn’t operate smoothly, remove the door

and then the door cover to check that the lock rods and

interlock buttons are properly mounted and aligned.

The interlock buttons should be oriented correctly and

operating smoothly. The interlock rods should be in the

proper position and should not overlap at the contact

point. (See steps 13-15.)

If the door is damaged, or if the door does not work after

reassembly, contact the call center at 1-800-243-0000.

Reversing the Door (cont.)

Two large

screws

Two small

screws

INSTALLATION INSTRUCTIONS

interlock

buttons

bumpers

MFL67731048_en_171017.indd 20 2017.10.17 2:40:26 PM

La page est en cours de chargement...

LG DLGX5781VE Le manuel du propriétaire

Ce manuel convient également à

LG DLGX5781VE Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents