Whirlpool WFW9150WW02 Le manuel du propriétaire
- Catégorie
- Machines à laver
- Taper
- Le manuel du propriétaire
FRONT.LOADING
AUTOMATICWASHER
For questions about features, operation/performance,
parts, accessories, or service call: 1-800-253-1301
In Canada, call: 1-800-807-6777
or visit our website at
www.whirlpool.com or www.whirlpool.ca
LAVEUSE
AUTOMATIQUEA
CHARGEMENTFRONTAL
Au Canada, pour assistance, installation ou service, composez le :
1-800-807-6777
ou visitez notre site internet &
www.whirlpool.ca
Table of Contents/Table des matieres .................. 2
Designed to use only HE
High Efficiency Detergent
Congue pour I'utilisation
d'un d6tergent HE Haute
efficacit6 seulement
W10252714A
TABLEOFCONTENTS
WASHER SAFETY ....................................................................................... 3
INSTALLATION REQUIREMENTS ............................................................. 4
Tools and Parts ......................................................................................... 4
Options ...................................................................................................... 4
Location Requirements ............................................................................. 4
Drain System ............................................................................................. 6
Electrical Requirements ............................................................................ 7
INSTALLATION INSTRUCTIONS ............................................................... 8
Remove Transport System ....................................................................... 8
Connect the Inlet Hoses ........................................................................... 8
Connect the Drain Hose ........................................................................... 9
Secure the Drain Hose .............................................................................. 9
Level the Washer .................................................................................... 10
Complete Installation .............................................................................. 10
FEATURES AND BENEFITS ..................................................................... 11
WASHER USE ............................................................................................ 12
Starting Your Washer .............................................................................. 12
Using the Proper Detergent .................................................................... 12
Using the Dispenser ................................................................................ 13
Pausing or Restarting ............................................................................. 14
Changing Cycles and Options ................................................................ 14
Status Lights ........................................................................................... 14
Cycles ..................................................................................................... 14
Normal Sounds ....................................................................................... 16
Options .................................................................................................... 16
Laundry Guide ........................................................................................ 17
LAUNDRY TIPS .......................................................................................... 18
Loading ................................................................................................... 18
Stain Removal Guide .............................................................................. 19
WASHER CARE ......................................................................................... 20
Cleaning Your Washer ............................................................................ 20
Water Inlet Hoses .................................................................................... 21
Vacation, Storage, and Moving Care ..................................................... 21
TROUBLESHOOTING ............................................................................... 22
Clothes Care ........................................................................................... 25
ASSISTANCE OR SERVICE ...................................................................... 26
WARRANTY ............................................................................................... 27
TABLEDESMATIERES
S¢:CURIT¢: DE LA LAVEUSE .................................................................... 28
EXIGENCES D'INSTALLATION ................................................................ 29
Outillage et pieces .................................................................................. 29
Options ................................................................................................... 29
Exigences d'emplacement ..................................................................... 29
Systeme de vidange ............................................................................... 31
Sp6cifications 61ectriques ....................................................................... 32
INSTRUCTIONS D'INSTALLATION ......................................................... 33
I_limination des accessoires de transport .............................................. 33
Raccordement des tuyaux d'alimentation ............................................. 33
Raccordement du tuyau de vidange ...................................................... 34
Immobilisation du tuyau de vidange ...................................................... 35
R_glage de I'aplomb de la laveuse ........................................................ 35
Achever I'installation ............................................................................... 35
CARAOTC:RISTIQUES ET AVANTAGES .................................................. 36
UTILISATION DE LA LAVEUSE ................................................................ 37
Mise en marche de la laveuse ................................................................ 37
Utilisation du d6tergent appropri6 .......................................................... 37
Utilisation du distributeur ........................................................................ 38
Pause ou remise en marche ................................................................... 39
Modification des programmes et options .............................................. 39
T6moins lumineux ................................................................................... 39
Programmes ........................................................................................... 40
Sons normaux ......................................................................................... 41
Options ................................................................................................... 41
Guide de lessivage ................................................................................. 43
OONSEILS BE LESSIVAGE ...................................................................... 44
Chargement ............................................................................................ 44
Guide pour 1'61imination des taches ....................................................... 45
ENTRETIEN DE LA LAVEUSE .................................................................. 46
Nettoyage de la laveuse ......................................................................... 46
Tuyaux d'arriv6e d'eau ........................................................................... 47
Precautions _ prendre avant les vacances,
un entreposage ou un d_m_nagement .................................................. 47
DEPANNAGE ............................................................................................. 48
Entretien des v_tements ......................................................................... 51
ASSISTANCE OU SERVICE ...................................................................... 53
GARANTIE .................................................................................................. 54
2
WASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately[
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,
including the following:
[] Read all instructions before using the washer.
[] Do not wash articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or
explode.
[] Do not add gasoline, dry-cleaning solvents, or other
flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
[] Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. Ifthe hot water system has not been
used for such a period, before using the washing
machine, turn on all hot water faucets and let the water
flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during
Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is used
near children.
Before the washer is removed from service or discarded,
remove the door or lid.
[] Do not reach into the washer if the drum, tub or agitator is
moving.
[] Do not install or store the washer where it will be exposed to
the weather.
[] Do not tamper with controls.
[] Do not repair or replace any part of the washer or attempt any
servicing unless specifically recommended in this manual or in
published user-repair instructions that you understand and
have the skills to carry out.
[] See "Electrical Requirements" for grounding instructions.
this time.
SAVE THESE INSTRUCTIONS
State of California Proposition 65 Warnings:
WARNING: This product contains a chemical known to the State of California to cause cancer.
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
INSTALLATIONREQUIREMENTS
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
• Pliers (that open to 19/16'' [39.5 mm])
• Flashlight (optional)
Tools needed for connecting the drain hose
• Locking pliers (that open to 19/16"[39.5 mm])
Tools needed for installation
• Open end wrenches 14 mm and 13 mm
• Level
• Wood block
• Ruler or measuring tape
Parts supplied
Pedestal
You have the option of purchasing pedestals of different heights
separately for this washer. You may select a 10" (254 mm) or a
15.5" (394 mm) pedestal. The pedestal will add to the total height
of the washer.
Optional pedestal
Pedestal Approximate Color Model
Height Height with Number
Washer
10" (254 mm) 46" (1168 mm) White WHP1000SQ
15.5" (394 mm) 51.5" (1308 mm) White WHP1500SQ
Stack Kit
D
A. Drain hose form
B. Inlet hose (2)
C. Inlet hose washer (4)
D. Transport bolt hole plug (4)
E.Beadedstrap
E Drainhose
G.Hoseclamp
Alternate Parts
Your installation may require additional parts. If you are interested
in purchasing one of the items listed here, call the toll-free number
on the cover or in the "Assistance or Service" section.
If You Have
You Will Need to Buy
Laundry tub or
standpipe taller
than 96" (2.4 m)
Sump pump system (if not already
available)
Overhead sewer
Standard 20 gal. (76 L), 30" (762 mm) tall
drain tub or utility sink and sump pump
(available from local plumbing suppliers)
Floor drain
Siphon break, Part Number 285834;
additional drain hose
Part Number 8318155; and connector
kit, Part Number 2858835
Drain hose too 4 ft (1.2 m) drain hose extension kit,
short Part Number 2858863
Water faucets 2 longer water fill hoses:
beyond reach of fill 6 ft (1.8 m) Part Number 76314
hoses 10 ft (3.0 m) Part Number 350008
Are you planning to stack your washer and dryer? To do so you
will need to purchase a Stack Kit.
Toorder, call the dealer from whom you purchased your washer or
refer to the "Assistance or Service" section. Ask for Part Number
8572546.
Selecting the proper location for your washer improves
performance and minimizes noise and possible washer "walk."
Your washer can be installed under a custom counter, or in a
basement, laundry room, closet, or recessed area. See "Drain
System."
Companion appliance location requirements should also be
considered. Proper installation is your responsibility.
You will need
• A water heater set to deliver 120°F (49°C) water to the washer.
• A grounded electrical outlet located within 6 ft (1.8 m) of
where the power cord is attached to the back of the washer.
See "Electrical Requirements."
• Hot and cold water faucets located within 4 ft (1.2 m) of the
hot and cold water fill valves, and water pressure of
20-100 psi (137.9-689.6 kPa).
• A level floor with a maximum slope of 1" (25 mm) under entire
washer. Installing the washer on soft floor surfaces, such as
carpets or surfaces with foam backing, is not recommended.
• A sturdy and solid floor to support the washer with a total
weight (water and load) of 400 Ibs (180 kg).
Do not operate your washer in temperatures below 32°F (0°C).
Some water can remain in the washer and can cause damage in
low temperatures.
4
Installation clearances
• The location must be large enough to allow the washer door
to be fully opened.
Additional spacing should be considered for ease of
installation and servicing. The door opens more than 90 °,
and it is not reversible.
Additional clearances might be required for wall, door, and
floor moldings.
Additional spacing of 1" (25 mm) on all sides of the washer
is recommended to reduce noise transfer.
Companion appliance spacing should also be considered.
Washer Dimensions
36"
[914mm}
(775ram)
Recommended installation spacing for custom undercounter
installation
The dimensions shown are for the recommended spacing.
Custom undercounter installation - Washer only
2" (50mm)
, m
(25ram} (686ram} (25ram}
Recommended installation spacing for recessed or closet
installation, with or without a pedestal
The dimensions shown are for the recommended spacing.
Recessed area or closet installation
1"--_ I_e-301/2"-_ "
(25ram) (775mra} (102mm)
481n.2--
48" (310cm2)
(1220mm)
,.i L
241n.2--
(155cm2)
A B
•...._ 3"
(76ram)
--_3"
{76ram)
A. Side view - closet or confined area
B. Closet door with vents
Recessed or closet installation - Washer on pedestal
1"--_,4t-_'---- 27"--m_ !-,_,--1"
(25mm) (686ram) (25mm)
38"raln.
(965ram]
i
1"---_1_*---301/2"----_4"
(25mm) (775ram} (102ram}
A
A. Recessed area
B. Side view - closet or confined area
Recommended installation spacing for recessed or closet
installation, with stacked washer and dryer
The dimensions shown are for the recommended spacing.
m
m
(76 m)
(76 m)
m =
-_ I'_- 1 (25ram)
m,,.======,..__
5%.**=._
(133ram)
(182 rnm,
1.....-J 1 27,,-,J .....
(25mm) (686mm) (25ram)
*Min. top and bottom air openings for closet door.
**External exhaust elbow requires additional space.
***Wall, door, and floor molding may require additional spacing.
Recommended installation spacing for cabinet installation
The dimensions shown are for the recommended spacing.
For cabinet installation, with a door, the minimum ventilation
openings in the top are required.
The washer can be installed using the standpipe drain system
(floor or wall), the laundry tub drain system, or the floor drain
system. Select the drain hose installation method you need. See
"Tools and Parts."
Standpipe drain system - wall or floor (views A & B)
The standpipe drain requires a minimum diameter standpipe of 2"
(50 mm). The minimum carry-away capacity can be no less than
17 gal. (64 L) per minute.
The top of the standpipe must be at least 30" (762 mm) high and
no higher than 96" (2.4 m) from the bottom of the washer.
30"rain.
(762ram)
A B
Laundry tub drain system (view C)
The laundry tub needs a minimum 20 gal. (76 L) capacity. The top
of the laundry tub must be at least 30" (762 mm) above the floor.
Floor drain system (view D)
The floor drain system requires a siphon break that may be
purchased separately. See "Tools and Parts."
The siphon break must be a minimum of 28" (710 mm) from the
bottom of the washer. Additional hoses might be needed.
C D
• Do not have a fuse in the neutral or ground circuit.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical
supply is required. A time-delay fuse or circuit breaker is
recommended. It is recommended that a separate circuit
serving only this appliance be provided.
This washer is equipped with a power supply cord having a
3 prong grounding plug.
To minimize possible shock hazard, the cord must be plugged
into a mating, 3 prong, grounding-type outlet, grounded in
accordance with local codes and ordinances. If a mating
outlet is not available, it is the personal responsibility and
obligation of the customer to have the properly grounded
outlet installed by a qualified electrician.
If codes permit and a separate ground wire is used, it is
recommended that a qualified electrician determine that the
ground path is adequate.
Do not ground to a gas pipe.
Check with a qualified electrician if you are not sure the
washer is properly grounded.
GROUNDING INSTRUCTIONS
For a grounded, cord=connected washer:
This washer must be grounded. In the event of a malfunction
or breakdown, grounding will reduce the risk of electrical
shock by providing a path of least resistance for electric
current. This washer is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The
plug must be plugged intoan appropriate outlet that is
properly installed and grounded in accordance with all local
codes and ordinances.
WARNING: Improper connection of the equipment=
grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in
doubt as to whether the appliance is properly grounded.
Do not modify the plug provided with the appliance - if it will
not fit the outlet, have a proper outlet installed by a qualified
electrician.
For a permanently connected washer:
This washer must be connected to a grounded metal,
permanent wiring system, or an equipment grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on
the appliance.
INSTALLATIONINSTRUCTIONS
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
IMPORTANT: Position the washer so that the rear of the washer is
within approximately 3 ft (900 mm) of its final location.
There are 4 transport bolts in the rear panel of the washer that
support the suspension system during transportation. These bolts
also retain the power cord inside the washer until the bolts are
removed.
1.
2.
On the back of the washer, loosen the 4 transport bolts using
a 13 mm wrench.
Once the bolt is loose, move it to the center of the hole and
completely pull out the bolt, including the plastic spacer
covering the bolt.
3. Once all 4 bolts are removed, discard the bolts and spacers.
Then pull the power cord through the opening of the rear
panel and close the hole with the attached cap.
4. Cover the bolt holes with the 4 transport bolt hole plugs.
NOTE: If the washer is to be transported at a later date, call your
local service center. To avoid suspension and structural damage,
your machine must be properly set up for relocation by a certified
technician.
(,,iiOi_/S_Sse(i;tl; _' " ......
Insert new flat washers (supplied) into each end of the inlet hoses.
Firmly seat the washers in the couplings.
A B
A. Coupling
B. Washer
Connect the inlet hoses to the water faucets
Make sure washer drum is empty and flat washers have been
placed into hose couplings. Both hoses must be used for the
washer to work properly.
1. Attach a hose to the hot water faucet. Screw on coupling by
hand until it is seated on the washer.
2. Attach a hose to the cold water faucet. Screw on coupling by
hand until it is seated on the washer.
3. Using pliers, tighten the couplings with an additional
two-thirds turn.
NOTE: Do not overtighten. Damage to the coupling or water
faucet can result. Both faucets must be turned on for the washer
to work properly.
Clear the water lines
Run water through both faucets and inlet hoses, into a laundry
tub, drainpipe or bucket, to get rid of particles in the water
lines that might clog the inlet valve screens.
Check the temperature of the water to make sure that the hot
water hose is connected to the hot water faucet and that the
cold water hose is connected to the cold water faucet.
Connect the inlet hoses to the washer
IMPORTANT: Make sure that the flat washers have been placed
into the hose couplings.
2. Slide drain hose onto washer connection.
3. Once drain hose is in place, release pliers.
1=
2.
3.
4=
H. Hot water inlet
C. Cold water inlet
Attach the hot water hose to the washer's hot (H) water inlet
valve. Screw on coupling by hand until it is seated on the
washer.
Attach the cold water hose to the washer's cold (C) water
faucet. Screw on coupling by hand until it is seated on the
washer.
Using pliers, tighten the couplings with an additional
two-thirds turn.
NOTE: Do not overtighten or use tape or sealants on the
valve. Damage to the valves can result.
Turn on the water faucets completely and check for leaks.
NOTE: Replace inlet hoses after 5 years of use to reduce the
risk of hose failure. Record hose installation or replacement
dates on the hoses for future reference.
Periodically inspect and replace hoses if bulges, kinks, cuts,
wear, or leaks are found.
Remove drain hose from washer drum
1. Use locking pliers, squeeze hose clamp tabs together and insert
over the end of drain hose.
4. Washer drain system can be installed using a floor drain, wall
standpipe, floor standpipe, or laundry tub.
Laundry tub drain or standpipe drain
Connect the drain hose form to the corrugated drain hose.
o
o
A B
A. Snap either end of the drain hose form to the drain hose at the point
where the corrugation begins.
B. Bend drain hose over drain hose form and snap into place.
To keep drain water from going back into the washer:
• Use the drain hose form, and do not force excess drain hose
into standpipe. Hose should be secure, but loose enough to
provide a gap for air.
• Do not lay excess hose on the bottom of the laundry tub.
Floor drain
You may need additional parts. See Floor drain under "Tools and
Parts."
Drain hose must be secured to stop the hose from moving when
water is pumped out. If the drain hose moves, water may end up
on the floor.
1. Drape the power cord over the washer top.
2. Move the washer to its final location.
3=
Place the drain hose in the laundry tub or standpipe as shown.
See illustrations A and B.
B
t!i'_.................i_
C
NOTES:
• Do not force excess drain hose back into the rear of the
washer.
4.
To avoid siphoning, do not seal or put more than 41/2''
(114 mm) of the drain hose into drainpipe or standpipe.
If the washer faucets and the drain standpipe are recessed,
put the hooked end of the drain hose in the standpipe as
shown. See illustration C.
Proper foot to floor contact and leveling your washer avoids
excessive noise and vibration.
NOTE: Installing washer on soft floor surfaces, such as carpets or
surfaces with foam backing, is not recommended.
1. Slide the washer to its final location.
2. Check that all four feet are in firm contact with the floor.
3. Check the levelness of the washer by placing a level on the
top edge of the washer, first side to side then front to back.
1=
2=
3=
4.
5.
6.
Check the electrical requirements. Be sure that you have the
correct electrical supply and the recommended grounding
method. See "Electrical Requirements."
Check that all parts are now installed. If there is an extra part,
go back through the steps to see which step was skipped.
Check that you have all of your tools.
Dispose of/recycle all packaging materials.
Check that both water faucets are on.
Check for leaks around faucets and inlet hoses.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
7=
8.
9.
Plug into a grounded 3 prong outlet.
Read "Washer Use."
To test and to clean your washer, measure V2the detergent
manufacturer's recommended amount of High Efficiency (HE)
detergent for a medium-size load. Pour the detergent into the
detergent dispenser. Select NORMAL and then press START/
PAUSE. Allow the washer to complete one whole cycle.
Use only HE High Efficiency detergenL
If the washer is against a wall, move the washer out slightly
before tipping back. If the washer is not level, first prop the
front with a wooden block and adjust the front feet height
moving the hexagonal plastic part as necessary. Repeat to
adjust back feet.
4. Make sure all four feet are in firm contact with the floor. Then
check that the washer is perfectly level (use a level). Repeat
steps 1-3 until washer is level.
5. After the washer is level, and all four feet are in firm contact
with the floor, use a9/_6"(14 mm) open-end wrench to turn the
Iocknuts on the feet, tightly against the washer cabinet.
IMPORTANT: All four Iocknuts on the feet must be tightened. If
the Iocknuts are not tight against the washer cabinet, the washer
may vibrate.
6. The washer should not move front to back, side to side, or
diagonally when pushed on its top edges.
7. Confirm the levelness of the washer.
10
FEATURESANDBENEFITS
Your new front-loading high efficiency washer, was designed to
conserve resources and lower your water and energy bills. The
washer is designed to determine and then provide the amount of
water needed for the best performance. The time of operation
may be greater for this new system than for a conventional
washer.
Electronic Controls
Flexible electronic controls are easy to use whether you are a
beginner or an expert.
Auto Water Level
Adjusting to the size of the load, this feature allows the washer to
use the minimal amount of water needed to clean and rinse the
clothes. With a low water level, you can obtain the same results.
Because only the required amount of water is used, the washer
saves energy, too. You can obtain the same washing results for
small and large load sizes.
Larger Load Size
Since there is no agitator, you can wash larger, bulkier items such
as an average size sleeping bag. You are also able to wash more
clothes at one time, which means fewer loads. You can wash a
pillow or a large stuffed teddy bear.
Suspension System
To reduce washer "walk" and "off-balance" conditions, your new
washer combines:
• 2 Springs to isolate vibration
• 3 Shock absorbers at the washer base to minimize movement
Stainless Steel Drum
The stainless steel drum eliminates corrosion and enables higher
spin speeds for more water extraction, reducing drying time.
Spin Speeds
This washer automatically selects the spin speed based on the
cycle selected. For some cycles, the default spin speed can be
changed if desired. This washer offers up to three different spin
speed choices.
Add a Garment
This option is available in all wash cycles except Rinse/Drain &
Spin, and Clean Washer with AFFRESH TM cycle. When this option
is available at the beginning of the cycle, the Add a Garment
status light will illuminate for the first 7 minutes. This washer
allows a 7-minute period in which other garments may be added
to a load.
Dynamic Balance
A precision balancing system allows the washer to reach high-
speed spins. The washer spins faster so that clothes coming out
of the washer will have less moisture than with traditional top load
machines. In addition, if the Dynamic Balance system detects off-
balance loads during spinning, it redistributes the clothes so that
they are evenly balanced.
Smart Dispensers
The three compartments in the dispenser allow loading of all
laundry products before the washer is started. The products
will be dispensed into the wash at the optimal time for high-
performance cleaning. The bleach release system is included in
the detergent advantage system. The detergent is added at the
beginning of the cycle, and the bleach is added after the enzymes
have had a chance to do their cleaning. The fabric softener is
dispensed in the rinse cycle or in the Extra Rinse, if selected. The
Detergent Advantage System Dispenser tray is easily removed for
cleaning.
Adaptive Variable Speed Motor
The motor adapts to the load size and to the cycle selected to
give the optimum cleaning, rinsing, and spinning conditions. The
motor can handle slow speeds needed for delicate items and is
powerful enough to drive an average clothes load up to high-
speed spin.
Use only HE High Efficiency detergenL
11
WASHERUSE
TumbleFresh 4.0 cu. ft.
SILK WHITEST
WHITES
RINSE/
DRAIN &SPIN
SOAK CLEAN
WASHER
witched1
/
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
The following is a guide to using your washer. Please refer to
specific sections of this manual for more detailed information.
Do not store laundry products on the top surface of this washer.
Vibration is normal during operation.
Use only High Efficiency detergents. The package for this type of
detergent will be marked "HE" or "High Efficiency." This wash
system, along with less water, will create too much sudsing with a
regular non-HE detergent. Using regular detergent will likely result in
washer errors, longer cycle times, and reduced rinsing performance.
It may also result in component failures and noticeable mold or
mildew. HE detergents are made to produce the right amount of
suds for the best performance. Follow the manufacturer's
instructions to determine the amount of detergent to use.
Use only HE High Efficiency detergent.
First Wash Cycle Without Laundry
Before washing clothes for the first time, if not completed during
the final installation step, choose the Normal cycle and run it
without clothes. Use only HE High Efficiency detergent. Use 1/2the
manufacturer's recommended amount for a medium-size load.
This initial cycle serves to ensure the interior is clean before
washing clothes.
For All Wash Cycles
1,
2.
To load washer
Open the washer door by pulling on the handle. Sort laundry
according to color and type of fabric. Place a load of sorted
clothes in the washer. Do not overload washer. Overloading
can cause poor cleaning.
• Always empty pockets. Small items can be caught within
the washer resulting in noise or plugging the pump.
The washer can be fully loaded, but not tightly packed.
Washer door should close easily.
Mix large and small items. Avoid washing a single item.
Load evenly.
Wash small items such as infant socks in mesh garment
bags. It is recommended that more than one garment bag
be used and that each garment bag be filled with equal
amounts of material.
• When unloading garments, occasionally check under the
rubber rim at the front of the tub for small items.
Close the washer door by pushing it firmly until the lock clicks.
After a lock check at the beginning of the cycle, the washer
door will remain locked during the wash cycle.
NOTE: After any wash cycle is completed, the door must be
opened and then closed before a new cycle can begin. The
door can be opened only if Start/Pause is selected while the
Add a Garment light is illuminated or if the cycle has been
canceled. See "To cancel a cycle" in the "Changing Cycles
and Options" section.
3. Open the dispenser drawer and add laundry products to the
detergent, bleach, or fabric softener compartments. Close
drawer slowly to avoid spills. See "Using the Dispenser."
4. Turn on the washer by pressing POWER. Select one of the
cycles by turning the cycle selector. The indicator light for the
selected cycle will illuminate. When selecting a Wash Cycle,
the preset Temp and Spin Speed for the selected cycle will
illuminate. These settings provide the recommended fabric
care for the selected cycle. See "Cycles."
5. Select the desired Options. Not all Options are available with
all cycles. See "Options."
6. If desired, select the Signal On/Off. The signal is helpful when
you are washing items that should be removed from the
washer as soon as it stops. Press and hold SPIN SPEED to
select Signal On or Signal Off.
12
7. 3. Push in the dispenser drawer slowly and completely (to avoid
a spill).
8.
To begin the wash cycle immediately
Press and hold START/PAUSE (for approximately 1 second).
• You will hear the door locking, unlocking, and locking
again. This is normal.
• If you do not press START/PAUSE within 5 minutes of
choosing a cycle, the washer automatically shuts off.
When the wash cycle is complete, the DONE status light
illuminates, the door unlocks, and the wash load can be
removed from the washer. The washer powers down
automatically 5 minutes after the cycle is complete and
the DONE light goes off until door is opened. To power
down the washer manually after the wash cycle is
complete, press POWER once.
To begin the wash cycle later
Press DELAY START until the desired delay time (in hours) is
displayed. Press START/PAUSE. The indicator will remain
illuminated during the desired time selected.
IMPORTANT: When delaying a cycle, use only powdered
detergents in the main wash compartment since liquid
detergents may seep out of the compartment during Delay,
before the wash cycle begins.
Your new washer has a dispenser drawer with three separate
compartments for your laundry products--one is for detergent,
one is for liquid chlorine bleach, and one is for liquid fabric
softener. Laundry products are diluted and dispensed
automatically at the proper time during the wash cycle, making it
unnecessary for you to return to the washer during the cycle to
add them.
It is normal for small amounts of water to remain in the dispensers
when the wash cycle is complete.
Do not put laundry products directly into the wash tub. Always
use the proper dispensers when adding laundry products.
Choosing the Right Detergent
Use only High Efficiency detergents. The package for this type of
detergent will be marked "HE" or "High Efficiency." This wash
system, along with less water, will create too much sudsing with a
regular non-HE detergent. Using regular detergent will likely result in
washer errors, longer cycle times, and reduced rinsing performance.
It may also result in component failures and noticeable mold or
mildew. HE detergents are made to produce the right amount of
suds for the best performance. Follow the manufacturer's
instructions to determine the amount of detergent to use.
Use only HE High Efficiency detergent.
Tofill dispenser compartments
1. Pull out the dispenser drawer.
2. Add the desired laundry products to the proper compartment.
A
B
Dispenser
A. Dispenser release lever
B. Main Wash detergent compartment
C. Liquid chlorine bleach compartment
D. Fabric softener compartment
Main Wash detergent compartment
(Letter B in Dispenser Illustration)
Add liquid or powdered HE detergent to this compartment for
your main wash cycle.
• Liquid color-safe bleach or oxi products may be added to the
Main Wash compartment along with liquid detergent.
Powdered color-safe bleach or oxi products may be added to
the Main Wash compartment along with the powdered
detergent.
Do not mix powdered and liquid products in the Main Wash
compartment.
Use the measurement device which comes with the detergent.
Add no more than the manufacturer's recommended amount.
NOTE: Overfilling could cause an oversudsing condition.
Chlorine bleach compartment
(Letter C in Dispenser Illustration)
Add NO MORE THAN 2/3cup (160 mL) liquid chlorine bleach to
this compartment. The bleach will be automatically diluted and
dispensed at the best time during the first rinse after the wash
cycle. This compartment cannot dilute powdered bleach.
• Use only liquid chlorine bleach in this dispenser. Do not use
this dispenser to add powdered chlorine or any form of color-
safe bleach or oxi products to your load.
Always measure liquid chlorine bleach. Use a measuring cup
with a pour spout; do not guess. Follow the manufacturer's
directions for proper use.
• Do not fill beyond the "MAX" level.
NOTE: Overfilling could cause garment damage.
Fabric softener compartment
(Letter D in Dispenser Illustration)
Follow the manufacturer's instructions to determine the amount of
fabric softener to use. Fabric softener will be automatically
dispensed in the final rinse or in the Extra Rinse, if selected.
• Do not fill beyond the "MAX" level.
13
1. To pause the washer at any time, press START/PAUSE.
2. To continue the cycle, press and hold START/PAUSE (for
approximately 1 second).
Not all Options are available with all Cycles.
Cycles and Options can be changed anytime before START/
PAUSE is pressed.
To cancel a cycle
1. Press POWER.
2. The washer powers down, the door unlocks, and clothes can
be removed.
NOTE: If the water level or the temperature is too high, the washer
will drain automatically before the door unlocks.
To change Options after the cycle has started
1. Press START/PAUSE once.
2. Press the desired OPTIONS. If the option is not available, the
machine will beep.
3. Press and hold START/PAUSE (for approximately 1 second) to
continue the cycle.
NOTE: Press and hold TUMBLEFRESH option button (approx. 1
second) to add periodic tumbling. See "Options" for complete
cycle description. The light will glow when selected and will
remain flashing for up to 6 hours or until the washer is stopped by
either pressing POWER or opening the door.
Todrain the washer manually
1. Press START/PAUSE.
2. Press RINSE/DRAIN & SPIN.
3. Deselect EXTRA RINSE Option.
4. Press and hold START/PAUSE (for approximately 1 second) to
begin the drain.
5. When the spin is complete, the door unlocks. Items can be
removed from the washer.
These lights show which portion of the cycle the washer is
operating. They also indicate when you can add an additional item
to the wash cycle and when the controls are locked.
STATUS
Add a ,i
Garment IF
Wash O
Rinse O
Spin
Done
Door Lock
Control Lock _ (_#'_'_
Q
LT o 2 FerZt,o,
IocWunlock
control
Adding items
You can add items to the washer after the wash cycle has started,
if the Add a Garment status light is illuminated. All cycles have this
feature except Rinse/Drain & Spin, and Clean Washer with
AFFRESH TM cycle.
To add items
1. Press START/PAUSE. The washer door unlocks, and items
can be added.
2. To continue the cycle, close the door and press and hold
START/PAUSE (for approximately 1 second).
NOTE: To add garments after the Add a Garment period is over,
the wash cycle needs to be canceled, the items added, and a new
wash cycle started.
Done
The Done light comes on after the cycle is complete. The light will
stay on until door is opened.
Locking controls
The Control Lock avoids unintended use of the washer. You can
also use the control lock feature to avoid unintended cycle or
option changes during a cycle. When Control Lock is illuminated,
all buttons are disabled except for START/PAUSE and POWER.
You can lock the controls while the washer is operating.
To lock the controls
Press and hold TUMBLEFRESH TM option for 3 seconds.
O
TumbleFresh
hold 3 sec to
lock/unlock
control
The Control Lock status light illuminates.
To unlock the controls
Press and hold TUMBLEFRESH TM option for 3 seconds until the
CONTROL LOCK Status light turns off.
Door Lock
When the status light illuminates, the door is locked. The door is
locked and unlocked automatically, depending on the stage of the
wash cycle.
Wash Cycles
Choose Wash Cycles by rotating the Cycle selector knob to the
desired cycle. Each cycle is designed for different types of fabric
and soil levels.
NORMAL
SMALLLOAD m ECOHEAVYDUTY
HEAVYDUTYDELICATE
SILK _,_X WHITEST
RINSE/
DRAIN&SPIN
SOAK CLEAN
WASHER
with affresh
Each cycle has a preset cycle time, TEMP, SPIN SPEED, and
may have preset Options. The preset settings provide the
recommended fabric care for the selected cycle.
14
The preset settings can be changed anytime before START/
PAUSE is pressed. Not all Options (TEMP, SPIN SPEED) are
available with all Cycles. To change settings after the cycle
has started, press START/PAUSE, then select the desired
settings. Press and hold START/PAUSE (for approximately
1 second) to continue the cycle.
Preset Cycle Settings
Each cycle has a preset Cycle Time, TEMP, and SPIN SPEED.
These settings provide the recommended fabric care for the
selected cycle. See chart.
Cycle Estimated Temp Spin
Time* Speed
(hr:min)
Whitest Whites 1:29 Hot High
Heavy Duty 1:14 Hot High
Eco Heavy Duty 1:14 Hot High
Normal 0:56 Warm High
Small Load 0:28 Warm High
(2 -3 items)
Delicate 0:37 Cold Low
Silk 0:37 Cold Low
Rinse/Drain & Spin 0:26/0:14 Cold High
Soak 0:30 Warm No Spin
Clean Washer with 0:54 N/A High
AFFRESH TM
*The cycle times vary automatically based on your water pressure,
water temperature, detergent, and clothes load. The cycle time
will be extended if oversudsing occurs or the load is unbalanced.
Whitest Whites
This cycle is especially designed for cleaning loads of soiled white
fabrics with the addition of chlorine bleach. Hot washing
temperatures assure optimal bleach activity. An additional rinse
provides optimal rinse performance to avoid chlorine residues on
your laundry. This cycle combines fast-speed tumbling, longer
wash time, and high-speed spin to shorten drying time. It also
includes an Extra Rinse option, which is automatic with Whitest
Whites cycle.
Heavy Duty
Use this cycle to wash loads of sturdy, colorfast fabrics and
heavily soiled garments. This cycle combines fast-speed
tumbling, longer wash time, and high-speed spin to shorten
drying times.
Eco Heavy Duty
This cycle is designed to provide energy savings by reducing hot
water usage, while providing the same wash performance as
Heavy Duty.
Normal
Use this cycle to wash loads of no-iron fabrics such as sport
shirts, blouses, casual business clothes, permanent press blends,
cottons and linens, and synthetic fabrics. This cycle combines
medium-speed tumbling, high-speed spin, and a load cooling
process to reduce wrinkling.
Small Load
Use this cycle to wash small loads of 2-3 lightly soiled garments
that are needed in a hurry. This cycle combines fast-speed
tumbling, a shortened wash time, and high-speed spin to shorten
drying time. Large wash loads will result in the machine increasing
the wash time.
Delicate
Use this cycle to wash sheer fabrics and lingerie. This cycle
combines low-speed tumbling and low-speed spin for gentle
fabric care.
• Use mesh garment bags to wash undergarments such as
underwire bras, items with strings, and small items such as
socks.
Silk
Use this cycle to clean washable silk and ultra delicate garments
(check label instructions to make sure the garment is washable.)
This cycle gently tumbles and drains with the lowest spinning to
gently clean garments and minimize wrinkling. Garments will
contain a higher amount of water at the end of this cycle because
of the low spin action.
Rinse/Drain & Spin
Use this cycle to get a rinse and spin only. This cycle combines
fast-speed tumbling and high-speed spin. If desired, you can
reduce the spin speed by selecting the speed you want from the
SPIN SPEED option.
Rinse/Drain & Spin is useful for:
• Loads that need rinsing only.
• Adding fabric softener to a load using the fabric softener
dispenser.
Using Drain & Spin:
1. Select Rinse/Drain & Spin cycle.
2. Deslect Extra Rinse option.
Soak
Use the Soak cycle to help remove set-in stains on fabrics. This
cycle provides a soak time with warm or cold water followed by
drain. Extra water, a short tumbling phase for equal distribution of
the laundry, and asoaking time without drum movement improve
the removal of set-in stains. Drain without spin assures gentle
treatment, even for delicate articles.
Clean Washer with AFFRESH TM cycle
Use the Clean Washer with AFFRESH TM cycle once a month to
keep the inside of your washer fresh and clean. This cycle uses a
higher water level in combination with AFFRESH ° washer cleaner
tablet or chlorine bleach to thoroughly clean the inside of your
washing machine. See "Cleaning Your Washer."
IMPORTANT: Do not place garments or other items in the washer
during the Clean Washer with AFFRESH TM cycle. Use this cycle
with an empty wash drum.
15
As with any new product, you will hear sounds that you are not
accustomed to. You may hear various sounds when the door is
locked or unlocked, and during the washing, rinsing, or spinning
process. Between changes in wash actions, there will be
momentary pauses. You will hear water spraying and splashing
during the wash and rinse cycles. These new sounds and pauses
are part of normal washer operation. See "Troubleshooting."
You can customize your wash by adding options to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all Options are
available with all cycles.
Signal
Extra Rinse 0 On/Off
O10HR _Hot _High
_8HR ®Warm _ Medium
®2us ®coJd ®Low
Tu mb'OeFre_lh 000
hold 3 sec to Delay Temp Spin
lock/unlock Start all cold Speed
control rinses hold 3 sec for
signal on/off
See the "Laundry Guide" section for an overview of possible
options for each Wash Cycle selection.
If an option is available with a selected cycle, the light for that
option will illuminate when selected.
If an option is unavailable with a selected cycle, there will be a
short tone and the light for that option will not illuminate when
selected.
Extra Rinse
An extra rinse can be used to aid in the removal of detergent
residue from garments. This option provides an additional rinse
with the same water temperature as in the normal rinse. It is
automatic for the Whitest Whites cycle. You may select or
deselect by pressing EXTRA RINSE.
TUMBLEFRESW Moption
Use this option when you are not able to unload your clothes,
soon after the wash cycle ends. This option provides periodic
tumbling for up to 6 hours to help freshen your clothes. During this
time, the "Done" indicator remains activated, the door remains
locked, and the TUMBLEFRESH TM option indicator light will flash.
The TUMBLEFRESH TM option will automatically stop and the door
lock will be released after this time expires, or if you press POWER
at anytime to unload your laundry.
DelayStart
Use this to begin the wash cycle later.
• Press DELAY START until the desired time (in hours) is
illuminated.
• Press START/PAUSE. As the countdown is performed the
correct indicator will be illuminated.
Temp
Each cycle has a preset water temperature setting. To change the
water temperature, press the TEMP button until the desired
setting is illuminated.
Select a water temperature based on the type of load you are
washing. Use the warmest wash water safe for fabrics. Follow
garment label instructions.
The water temperature for all rinses are cold. Cold rinses save
energy.
Temperature Guide
Temp Suggested Fabrics
HOT Whites and pastels
Heavy soils
WARM Bright colors
Moderate to light soils
COLD Colors that bleed or fade
Light soils
In wash water temperatures colder than 60°F (15.6°C), detergents
do not dissolve well. Soils may be difficult to remove.
Controlled Temperature
Warm and cold wash temperatures are sensed and maintained by
regulating the amount of hot and cold water from your faucet. This
provided excellent cleaning while saving energy.
ATC (Auto Temp Control) electronically senses and maintains a
uniform water temperature. ATC regulates incoming hot and cold
water.
• Cold rinse is not controlled and will be the same as your cold
faucet.
Spin Speed
Each cycle has a preset spin speed. To change the spin speed,
press the SPIN SPEED button until the desired setting is
illuminated.
Signal On/Off
This signal is helpful when you are removing items from the
washer as soon as it stops. Press and hold SPIN SPEED button
for 3 seconds for Singal On or Signal Off.
16
Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these
washer cycles.
CYCLE SUGGESTED LOAD TYPE AVAILABLE OPTIONS
Delay Extra Signal
Start Rinse On/Off
Whitest Whites Soiled white fabrics v' v' v' v'
Heavy Duty Heavily soiled underwear, towels, shirts, etc., made of cotton _ _ _
Eco Heavy Duty Heavily soiled underwear, towels, shirts, etc., made of cotton _ _ _
Normal Normally soiled blouses, shirts, overalls, etc., made of _ _ _
polyester, nylon, cotton, linen, or cotton blends
Small Load Small loads of 2-3 lightly soiled cotton, polyester, nylon, and _ _ _
cotton blends.
Delicate Curtains and delicate clothing, dresses, skirts, shirts, and _ _ _
blouses.
Silk Silk or ultra delicate fabrics labeled as machine washable _ _ _
Rinse/ All loads _ _ _
Drain & Spin
Soak
Clean Washer
with AFFRESH TM
TumbleFresh TM
Fabrics made of cotton, linen, polyester, or nylon v' v'
No clothes, use AFFRESH _ washer cleaner tablet or chlorine
bleach
17
LAUNDRYTIPS
Preparing clothes for washing
Follow these recommendations to help you prolong the life of your
garments.
• Use only High Efficiency detergents. The package for this type
of detergent will be marked "HE" or "High Efficiency." This
wash system, along with less water, will create too much
sudsing with a regular non-HE detergent. Using regular
detergent will likely result in washer errors, longer cycle times
and reduced rinsing performance. It may also result in
component failures and noticeable mold or mildew. HE
detergents are made to produce the right amount of suds for
the best performance. Follow the manufacturer's instructions
to determine the amount of detergent to use.
Use only HE High Efficiency detergent.
Close zippers, snaps, and hooks to avoid snagging other
items. Remove pins, buckles, and other hard objects to avoid
scratching the washer interior. Remove non-washable trim
and ornaments.
• Empty pockets. Small items can be caught with the washer
resulting in noise or plugging the pump.
• Turn down cuffs; brush away lint and dirt.
• Turn wool and synthetic knits inside out to avoid pilling.
• Tie strings and sashes so they will not tangle.
• Mend tears, loose hems, and seams.
• Treat spots and stains.
• Stained or wet garments should be washed promptly for best
results.
Mix large and small items, avoid washing single items, and
load evenly.
Wash small items, such as infant socks, in a mesh garment
bag. To create a balanced load it is recommended that more
than one garment bag be used, and that each garment bag be
filled with equal amounts of material.
NOTE: Ifyou are washing only small items, it is recommended
that more than one mesh garment bag be used, and that each
garment bag be filled with equal amounts of material.
Sorting
• Separate heavily soiled items from lightly soiled ones, even if
they would normally be washed together. Separate lint-givers
(towels, chenille) from lint-takers (corduroy, synthetics,
permanent press). When possible, turn lint-givers inside out.
Separate dark colors from light colors, colorfast items from
noncolorfast items.
Sort by fabric and construction (sturdy cottons, knits, delicate
items).
Unloading
• Remove clothes from washer after the cycle is completed.
Metal objects such as zippers, snaps, and buckles may rust if
left in the washer basket for a long time.
• When unloading garments, occasionally check under the
colored seal at the front of the tub for small items.
Loading suggestions
Heavy Work Clothes
2 pair pants 3 pair jeans
3 shirts 1 coverall
Mixed Load
2 double sheets or 6 pair shorts
1 king size sheet(s) 2 shirts
4 pillowcases 2 blouses
6 T-shirts 6 handkerchiefs
Towels
8 bath towels 10 washcloths
8 hand towels 1 bath mat
Delicates
3 camisoles 2 bras
4 slips 2 nighties
4 panties
Small Load cycle
(2-3 garments)
2 dress shirts
1 pair dress pants
18
Stain Use Liquid Chlorine or Use suggested Stain
Ink
Color-Safe Bleach
i,,'
Wash Cycle
Whitest Whites
I_ Cold or Warm
Normal
Blood
Coffee/
Chocolate
Cosmetics
I_ Warm
Whitest Whites
Dirty
Motor Oil
Heavy Duty
Warm
Heavy Duty
Grass
Tomato
Products
Mud
Deodorants
Ring around
the Collar
Use Liquid Chlorine or
Color-Safe Bleach
i,,'
i,,'
i,,'
i,,'
Use suggested
Wash Cycle
Whitest Whites
Whitest Whites
Warm
Whitest Whites
Heavy Duty
Normal
Do not tumble dry soiled or stained items. Heat may permanently set stains.
19
WASHERCARE
Cleaning the Door Seal/Bellow
1. Open the washer door and remove any clothing or items from
the washer.
2=
Inspect the colored seal/bellow between the door opening
and the basket for stained areas. Pull back the seal/bellow to
inspect all areas under the seal/bellow and to check for
foreign objects.
A. Seal/Bellow
3. If stained areas are found, wipe down these areas of the seal/
bellow, using the procedure that follows.
a) Mix a dilute solution, using 3Acup (177 mL) of liquid
chlorine bleach, and 1 gal. (3.8 L) of warm tap water.
b) Wipe the seal/bellow area with the dilute solution, using a
damp cloth.
c) Let stand 5 minutes.
d) Wipe down area thoroughly with a dry cloth and let the
washer interior air dry with door open.
IM PORTANT:
• Wear rubber gloves when cleaning for prolonged periods.
• Refer to the bleach manufacturer's instructions for proper use.
Washer Maintenance Procedure
This washer has a special cycle that uses higher water volumes in
combination with AFFRESH <ewasher cleaner or liquid chlorine
bleach to thoroughly clean the inside of the washer.
NOTES:
• Read these instructions completely before beginning the
cleaning process.
If necessary, the cleaning cycle may be interrupted by
pressing the POWER button twice. However, this will not
immediately stop the cycle. The machine will continue with
several rinse and drain steps to ensure that all remaining
AFFRESW ewasher cleaner or liquid chlorine bleach is rinsed
from the washer.
Begin procedure
1. Open the washer door and remove any clothing or items from
the washer.
2. Using the AFFRESH _ washer cleaner (Recommended):
Add one AFFRESH _ washer cleaner tablet to the washer
drum.
3=
If using liquid chlorine bleach:
Open the dispenser drawer and immediately add 2/3cup
(160 mL) of liquid chlorine bleach to the bleach compartment.
NOTE: Do not add any detergent to this cycle. Use of more
than 2/3cup (160 mL) of bleach will cause product damage
over time.
4. Close the washer door and dispenser drawer.
5. Select the CLEAN WASHER with AFFRESH TM cycle.
6. Press START/PAUSE.
7.
NOTE: The basket will rotate, then the door will unlock, lock
again, and then the cycle will continue.
• The machine will not fill, but the basket will rotate while the
washer runs a short sensing cycle. This will take
approximately 3 minutes.
The cycle will determine whether clothing or other items are in
the washer.
a) If no items are detected in the washer, it will proceed to
Step 8.
b) If the Wash LED light flashes, the door will unlock.
Remove clothing or items in the washer.
• Press POWER to cancel the flashing LED light. Then
repeat steps 1, 2, and 6 to start the cycle again.
8. Once the cycle has begun, allow the cycle to complete.
9. After the cycle is complete, leave the door open slightly, to
allow for better ventilation and drying of washer interior.
Always do the following to maintain washer freshness
• Use only HE High Efficiency detergent.
• Leave the door slightly open after each cycle to allow for
better ventilation and drying of washer interior.
• Repeat the cleaning procedure monthly.
• If the procedure does not sufficiently improve the machine
freshness, please evaluate your installation and usage
conditions for other causes.
Cleaning the exterior
Use a soft damp cloth or sponge to wipe up any spills.
Occasionally wipe the outside of your washer to keep it looking
new. Use mild soap and water. Do not use abrasive products.
Cleaning the dispenser drawer
The dispenser drawer is removable for easy cleaning.
1. Unlock the dispenser drawer by pressing the Release Lever.
See "Using the Dispenser." Remove the drawer.
2. Remove the inserts (the siphon from the softener and bleach
compartments).
3. Wash the parts under running water.
NOTE: Do not wash components in the dishwasher.
4. Replace the inserts and return the dispenser to the drawer.
20
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
Whirlpool WFW9150WW02 Le manuel du propriétaire
- Catégorie
- Machines à laver
- Taper
- Le manuel du propriétaire
dans d''autres langues
- English: Whirlpool WFW9150WW02 Owner's manual
Documents connexes
Autres documents
-
Maytag MHWZ400TQ - 3.7 cu. Ft. Epic Z Front Load Washer Mode d'emploi
-
-
-
-
-
-
Crosley GLTF2940FS2 Guide d'installation
-