KitchenAid KSEG700EBS0 Le manuel du propriétaire

Catégorie
Cuisinières
Taper
Le manuel du propriétaire

Ce manuel convient également à

THANK YOU for purchasing this high-quality product. Register your range at www.kitchenaid.com. In Canada, register your range at
www. kitchenaid.ca.
For future reference, please make a note of your product model and serial numbers. These can be found on the label located on the
oven frame behind the top right side of the oven door.
Model Number Serial Number
Para una version de estas instrucciones en espa_ol, visite www.kitchenaid.com.
Debera tener a mano el nOmero de modelo y de serie, que estan ubicados en el marco del horno, detrAs del lado derecho superior de
la puerta del horno.
Table of Contents
RANGE SAFETY ........................................................................... 2
The Anti-Tip Bracket .................................................................. 2
KEY USAGE TIPS ......................................................................... 4
AquaLift ®Self-Cleaning Technology .......................................... 4
Surface Temperatures ............................................................... 4
Preheating .................................................................................. 4
Ceramic Glass Cooktop Cleaning ............................................. 4
FEATURE GUIDE .......................................................................... 5
Electronic Oven Controls ........................................................... 8
COO KTO P................................................................................... 10
Cookware ................................................................................. 11
Home Canning ......................................................................... 12
OVEN ........................................................................................... 13
Aluminum Foil........................................................................... 13
Positioning Racks and Bakeware ............................................ 13
Roll-Out Rack ........................................................................... 14
Oven Vent ................................................................................. 15
Sabbath Mode ......................................................................... 15
Baking and Roasting ................................................................ 15
Broiling ..................................................................................... 16
Convection Cooking ................................................................ 16
Proofing Bread ......................................................................... 16
Cook Time ................................................................................ 16
Meat Probe ............................................................................... 17
Baking Drawer .......................................................................... 17
Oven Light ................................................................................ 17
RANGE CARE ............................................................................. 18
Clean Cycle .............................................................................. 18
General Cleaning ...................................................................... 19
Remove/Replace Drawer ......................................................... 20
PROBLEM SOLVER ................................................................... 20
ACCESSORIES ........................................................................... 22
WAR RANTY ................................................................................ 23
W10722059B
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
The Anti-Tip Bracket
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without having
the anti-tip bracket fastened down properly.
Tip Over Hazard
A child or adult can tip the range and be killed.
Verify the anti-tip bracket has been properly installed and engaged per installation instructions.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed and engaged.
Failure to follow these instructions can result in death or serious burns to children and adults.
Anti-Tip
"-Bracket
Range Foot
To verify the anti-tip bracket is installed and engaged:
Slide range forward.
Look for the anti-tip bracket securely attached to floor or wall.
Slide range back so rear range foot is under anti-tip bracket.
See installation instructions for details.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
iMPORTANT SAFETY iNSTRUCTiONS
WARN(NG: To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the range, follow
basic precautions, including the following:
[] WARNING: TO REDUCE THE RISK OF TIPPING OF
THE RANGE, THE RANGE MUST BE SECURED BY
PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK
IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE
RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET
SECURELY ATTACHED TO FLOOR OR WALL, AND
SLIDE RANGE BACK SO REAR RANGE FOOT IS
UNDER ANTI-TIP BRACKET.
[] CAUTION: Do not store items of interest to children in
cabinets above a range or on the backguard of a range -
children climbing on the range to reach items could be
seriously injured.
[] Proper Installation - Be sure the range is properly installed
and grounded by a qualified technician.
[] Never Use the Range for Warming or Heating the Room.
[] Do Not Leave Children Alone - Children should not be left
alone or unattended in area where the range is in use.
They should never be allowed to sit or stand on any part of
the range.
[] Wear Proper Apparel- Loose-fitting or hanging garments
should never be worn while using the range.
[] User Servicing - Do not repair or replace any part of the
range unless specifically recommended in the manual. All
other servicing should be referred to a qualified technician.
[] Storage in or on the Range - Flammable materials should
not be stored in an oven or near surface units.
[] Do Not Use Water on Grease Fires - Smother fire or flame
or use dry chemical or foam-type extinguisher.
[] Use Only Dry Potholders - Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel
or other bulky cloth.
[] DO NOT TOUCH SURFACE UNITS OR AREAS NEAR
UNITS - Surface units may be hot even though they are
dark in color. Areas near surface units may become hot
enough to cause burns. During and after use, do not touch,
or let clothing or other flammable materials contact surface
units or areas near units until they have had sufficient time
to cool. Among those areas are the cooktop and surfaces
facing the cooktop.
[] Use Proper Pan Size - The range is equipped with one or
more surface units of different size. Select utensils having
flat bottoms large enough to cover the surface unit heating
element. The use of undersized utensils will expose a
portion of the heating element to direct contact and may
result in ignition of clothing. Proper relationship of utensil to
burner will also improve efficiency.
[] Never Leave Surface Units Unattended at High Heat
Settings - Boilover causes smoking and greasy spillovers
that may ignite.
[] Make Sure Reflector Pans or Drip Bowls Are in Place -
Absence of these pans or bowls during cooking may
subject wiring or components underneath to damage.
[] Protective Liners - Do not use aluminum foil to line surface
unit drip bowls or oven bottoms, except as suggested in
the manual. Improper installation of these liners may result
in a risk of electric shock, or fire.
[] Glazed Cooking Utensils - Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed
utensils are suitable for range-top service without breaking
due to the sudden change in temperature.
[] Utensil Handles Should Be Turned Inward and Not Extend
Over Adjacent Surface Units - To reduce the risk of burns,
ignition of flammable materials, and spillage due to
unintentional contact with the utensil, the handle of a
utensil should be positioned so that it is turned inward, and
does not extend over adjacent surface units.
[] Do Not Soak Removable Heating Elements - Heating
elements should never be immersed in water.
[] Do Not Cook on Broken Cooktop - If cooktop should
break, cleaning solutions and spillovers may penetrate the
broken cooktop and create a risk of electric shock. Contact
a qualified technician immediately.
[] Clean Cooktop With Caution - If a wet sponge or cloth is
used to wipe spills on a hot cooking area, be careful to
avoid steam burn. Some cleaners can produce noxious
fumes if applied to a hot surface.
[] Use Care When Opening Door - Let hot air or steam
escape before removing or replacing food.
[] Do Not Heat Unopened Food Containers - Build-up of
pressure may cause container to burst and result in injury.
[] Keep Oven Vent Ducts Unobstructed.
[] Placement of Oven Racks - Always place oven racks in
desired location while oven is cool. If rack must be moved
while oven is hot, do not let potholder contact hot heating
element in oven.
[] DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN - Heating elements may be hot even
though they are dark in color. Interior surfaces of an oven
become hot enough to cause burns. During and after use,
do not touch, or let clothing or other flammable materials
contact heating elements or interior surfaces of oven until
they have had sufficient time to cool. Other surfaces of the
appliance may become hot enough to cause burns - among
these surfaces are oven vent openings and surfaces near
these openings, oven doors, and windows of oven doors.
For self-cleaning ranges -
[] Do Not Clean Door Gasket - The door gasket is essential
for a good seal. Care should be taken not to rub, damage,
or move the gasket.
[] Do Not Use Oven Cleaners - No commercial oven cleaner
or oven liner protective coating of any kind should be used
in or around any part of the oven.
[] Clean Only Parts Listed in Manual.
[] Before Self-Cleaning the Oven - Remove broiler pan and
other utensils.
For units with ventilating hood -
[] Clean Ventilating Hoods Frequently - Grease should not
be allowed to accumulate on hood or filter.
[] When flambeing foods under the hood, turn the fan on.
SAVE THESE INSTRUCTIONS
AquaLift ®Self-Cleaning Technology
( AquoLift
Self-Cleaning
Technology
AquaLift ®Self-Cleaning Technology is a first-of-its-kind cleaning
solution designed to minimize the time, temperature and odors that
ordinarily come with traditional self-cleaning methods. With
AquaLift ®Self-Cleaning Technology, an exclusive coating on the
interior of the oven is activated with heat and water to release
baked-on soil. To use AquaLift _ Self-Cleaning Technology, simply
wipe out loose debris, pour water into the oven bottom and run the
AquaLift ®Self-Cleaning cycle. When the cycle finishes in under
1 hour at a lower temperature than in traditional self-cleaning
methods, just wipe out the remaining water and loose debris. See
the "Clean Cycle" section for more detailed instructions. For
additional information, frequently asked questions and videos on
using AquaLift _Self-Cleaning Technology, visit our website at
http:llwhirlpooleorp.comlaqualift.
Surface Temperatures
When the range is in use, all range surfaces may become hot,
such as the knobs and oven door.
Baking or Storage Drawer
When the oven is in use, the drawer may become hot. Do not store
plastics, cloth, or other items that could melt or burn in the drawer.
Oven Vent
The oven vent releases hot air and moisture from the oven, and
should not be blocked or covered. Do not set plastics, paper or
other items that could melt or burn near the oven vent.
Preheating
When beginning a Bake, Convect Bake or Convect Roast cycle, the
oven will begin preheating after Start is pressed. The oven will take
approximately 12 to 15 minutes to reach 350°F (177°C) with all of
the oven racks provided with your oven inside the oven cavity.
Higher temperatures will take longer to preheat. The preheat cycle
rapidly increases the oven temperature. The actual oven
temperature will go above your set temperature to offset the heat
lost when your oven door is opened to insert food. This ensures
that when you place your food in the oven, the oven will begin at
the proper temperature. Insert your food when the preheat tone
sounds. Do not open the door during preheat before the tone
sounds.
Ceramic Glass Cooktop Cleaning
To avoid damaging the cooktop, do not use steel wool, abrasive
powder cleansers, chlorine bleach, rust remover or ammonia.
1. Remove food/residue with the Cooktop Scraper.
2.
For best results, use the Cooktop Scraper while the
cooktop is still warm, but not hot to the touch. It is
recommended to wear an oven mitt while scraping the
warm cooktop.
Hold the Cooktop Scraper at approximately a 45° angle
against the glass surface and scrape the residue. It will be
necessary to apply pressure in order to remove the
residue.
Allow the cooktop to cool down completely before proceeding
to Step 2.
Apply a few dime-sized drops of affresh ®Cooktop Cleaner to
the affected areas.
3.
Rub affresh ®Cooktop Cleaner onto the cooktop surface
with the blue Cooktop Cleaning Pad. Some pressure is
needed to remove stubborn stains.
Allow the cleaner to dry to a white haze before proceeding
to Step 3.
Polish with a clean, dry cloth or a clean, dry paper towel.
Repeat steps 1 through 3 as necessary for stubborn or
burned-on stains.
The Complete Cooktop Cleaner Kit is available for order including
the following:
Cooktop Scraper
affresh ®Cooktop Cleaner
Blue Cooktop Cleaning Pads
See the "Accessories" section for part numbers and information on
ordering.
Thismanualcoversseveralmodels.Yourmodelmayhavesomeoralloftheitemslisted.RefertothismanualortheProductHelpsection
ofourwebsiteatwww.kitchenaid.comformoredetailedinstructions.InCanada,refertotheProductHelpSectionat
www.kitchenaid.ca.
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
Detay Oven
BakeI SteamI Bro, CookI 1 2 3
Bake Time Start Light
Proof I Keep 4 S 6
Warm
--EASY CONVECT --
Bake I Broil I Roast 000 7 8 9
o o
--BAKING DRAWER-- WARM ZONE
Clock Timer AquaLift
Bake I s_owI Keep On/OfflConfir m -- 0
Cook Warm Tools SET/OFF Self Clean
CLOCK/TOOLS Clock
The Clock can use a 12- or 24-hour cycle. See the "Electronic Oven Controls" section.
1. Press CLOCK/TOOLS until "CLOCK" is displayed.
2. Press START to change the time.
3. Press "3" for AM or "6" for PM.
4. Use the number keypad to set the time of day.
5. Press START to save the setting.
OVEN LIGHT
Oven cavity light The oven light is controlled by a keypad on the oven control panel. While the oven door is
closed, press OVEN LIGHT to turn the light on and off. When the oven door is opened, the
oven light will automatically come on.
START
Cooking start The Start keypad begins any oven function. If Start is not pressed within 2 minutes after
pressing a keypad, the function is canceled and the time of day is displayed.
BAKE
Baking and
roasting
1. Press BAKE.
2. Set the desired temperature between 170°F and 500°F (75°C and 260°C) using the
number keypads. The default temperature is 350°F (180°C).
3. Press START.
4. To change the temperature, repeat steps 2 and 3.
5. Press CANCEL UPPER when finished.
BROIL
Broiling
1, Press BROIL
2, Press the number keypads to set the desired temperature,
& Press START and aJlow the oven to preheat for 2 minutes,
4, To change the temperature, repeat steps 2 and 3,
5, Position the sookwa_ inthe oven, and then close the door,
6, Press CANCEL UPPER when finished.
KEEP WARM Hold warm
Food must be at serving temperature befere piacing it in the warmed oven,
1, Press KEEP WARM,
2. Set the desired temperature between 145;:F and 190°F (_C and 88'_C) using the
number keypads, The default temperature is 170_'F (75"C)
& Press START,
4, Press CANCEL UPPER when finished
EASY CONVECT
BROIL
Conv_t|on
coo_Jng
1. Press EASY CONVECT BROIL
2. Press"l'tohavetheovenautomatJcaHyconvertthetemperatureandtimeforconvection
baking, Press "2" to manualiy convert the temperature and ti_
& Press the number keypeds to set a temperature other than 325:'F (177' C) in 5''
increments between 170<F and 500'*F (77:'C and 26C_C),
4, Press START,
5. (Optional} Press the number keypads to set a cooktime,
5` Press START,
7. To change the temperature, repeat steps 2 and 3,
& Press CANCEL UPPER when fJnisl_ed
COOKTIME Timed cooking Timed Cooking aIiows the o_#ento be set to turn on at a certain time of day, cook for a set
length of time, and/or shut off auto_tically.
To set a Timed Cook or a Delayed Timed Cook, see 'Cook Time' section,
BAYJNG
DRAWER BAKE
(on some models)
Baking drawer
I. Press BAKING DRAWER BAKE,
2. Set the desired temperature between 170°F and 451 °F (75°C and 233_-C) using the
number keypads, The default temperature is 350':_F(t 80_C),
& Press START,
4, To change the temperature, repeat steps 2 and 3,
& Press CANCEL LOWER when finished,
BAKING
DRAWER KEEP
WARM
(onsomemodels)
Warming drawer Food must be at serving temperature before placing _ in the warmed oven,
1. Press BAKING DRAWER KEEP WARM
2. Set the desired temperature betvceen 145':_Fand I_°F (63°C and 880) using the
number keypads The default temperature is 170<F (75°0).
& Press START.
4. Press CANCEL LOWER when finished,
AQUALIFT SELF Clean cycle
CLEAN
See the "Clean Cycle" section
CLOCKJTOOLS Energy save Press and hoid CLOCK/TOOLS for 3 seconds to change status. The display will scroli
"Energy saver on' or 'Energy saver off,"
if Energy Save is on, the range will go into sleep mode after 5 minutes of inactivity: Any
keypad press wil_ activate the display, If Energy Save is off, the display will be on at n!l times
Electronic Oven Controls
Control Display
The display will flash when powered up or after a power loss. Press
CANCEL UPPER to clear. When the oven is not in use, the time of
day is displayed. Ifthe range is in Energy Save mode, the display
will be blank when not in use.
Tones
Tones are audible signals, indicating the following:
One Tone
Valid keypad press
Oven is preheated (long tone)
Function has been entered
Reminder, repeating each minute after the end-of-cycle tones
Three Tones
Invalid keypad press
Four Tones
End of cycle
Use the Clock/Tools keypad to change the tone settings.
Energy Save
The Energy Save mode puts the range into sleep mode and
reduces energy consumption.
To Activate the Energy Save Mode:
1. Press and hold CLOCK/TOOLS for 3 seconds. "Energy saver
on." will appear in the display.
2. The setting will be activated after 5 minutes.
To Deactivate the Energy Save Mode:
1. Press and hold CLOCK/TOOLS for 3 seconds. "Energy saver
off." will appear in the display.
2. The clock will reappear in the display, and the range can be
operated as usual.
Settings
Many features of the oven control can be adjusted to meet your
personal needs. These changes are made using the Clock/Tools
keypad.
Use the Clock/Tools keypad to scroll through the features that can
be changed. Each press of the Clock/Tools keypad will advance
the display to the next setting. After selecting the feature to be
changed, the control will prompt you for the required input. Then
press START or CANCEL UPPER to exit and display the time of
day. Details of all of the feature changes are explained in the
following sections.
Press CANCEL UPPER to exit Settings.
Clock
The Clock can use a 12- or 24-hour cycle.
1. Press CLOCK/TOOLS until "CLOCK" is displayed.
2. Press START to change the time.
3. Press "3" for AM or "6" for PM.
4. Use the number keypads to set the time of day.
5. Press START or CANCEL UPPER to exit and display the time
of day.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit, but can be changed to
Celsius.
1. Press CLOCK/TOOLS until "TEMP UNIT" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START or CANCEL UPPER to exit and display the time
of day.
Audible Tones Disable
Turns off all tones, including the end of cycle tone and key press
tones. Reminder tones are still active when all tones are disabled.
1. Press CLOCK/TOOLS until "SOUND" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START or CANCEL UPPER to exit and display the time
of day.
Sound Volume
Sets the volume of the tone to either high or low.
1. Press CLOCK/TOOLS until "SOUND VOLUME" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START or CANCEL UPPER to exit and display the time
of day.
End of Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
1. Press CLOCK/TOOLS until "END TONE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START or CANCEL UPPER to exit and display the time
of day.
Key Press Tones
Activates or turns off the tones when a keypad is pressed.
1. Press CLOCK/TOOLS until "KEYPRESS TONE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START or CANCEL UPPER to exit and display the time
of day.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute after
the end of cycle tones.
1. Press CLOCK/TOOLS until "REMINDER TONE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START or CANCEL UPPER to exit and display the time
of day.
12/24 Hour Clock
1. Press CLOCK/TOOLS until "12/24 HOUR" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START or CANCEL UPPER to exit and display the time
of day.
DemoMode
IMPORTANT:Thisfeatureisintendedforuseonthesalesfloor
with120Vpowerconnectionandpermitsthecontrolfeaturestobe
demonstratedwithouttheoventurningon.Ifthisfeatureis
activated,theovenwillnotwork.
1. PressCLOCK/TOOLSuntil"DEMOMODE"isdisplayed.
2. Thecurrentsettingwillbedisplayed.
3. Pressthe"1"keypadtoadjustthesetting.
4. PressSTARTorCANCELUPPERtoexitanddisplaythetime
ofday.
SabbathMode
TheSabbathModesetstheoventoremainoninabakesetting
untilturnedoff.
WhentheSabbathModeisset,onlytheBakecyclewilloperate.
Allothercookingandcleaningcyclesaredisabled.Notoneswill
sound,andthedisplayswillnotindicatetemperaturechanges.
Whentheovendoorisopenedorclosed,theovenlightwillnot
turnonoroff,andtheheatingelementswillnotturnonoroff
immediately.
ToEnableSabbathModeCapability(OneTimeOnly):
1. PressCLOCK/TOOLSuntil"SABBATH"isdisplayed.
2. Thecurrentsettingwillbedisplayed.
3. Pressthe"1"keypadtoadjustthesetting.
4. PressSTARTorCANCELUPPERtoexitanddisplaythetime
ofday.
12-HourShutoff
Theovencontrolissettoautomaticallyshutofftheoven12hours
aftertheoveninitiatesacookorcleanfunction.Thiswillnot
interferewithanytimedordelaycookfunctions.
1. PressCLOCK/TOOLSuntil"12HrAUTO_OFF"isdisplayed.
2. Thecurrentsettingwillbedisplayed.
3. Pressthe"1"keypadtoadjustthesetting.
4. PressSTARTorCANCELUPPERtoexitanddisplaythetime
ofday.
Languages-ScrollingDisplayText
LanguageoptionsareEnglish,SpanishandFrench.
1. PressCLOCK/TOOLSuntil"LANGUAGE"isdisplayed.
2. Thecurrentsettingwillbedisplayed.
3. Pressthe"1"or"2"keypadtoselectthedesiredlanguage.
4. PressSTARTorCANCELUPPERtoexitanddisplaythetime
ofday.
OvenTemperatureOffsetControl
IMPORTANT:Donotuseathermometertomeasureoven
temperature.Elementswillcycleonandoffasneededtoprovide
consistenttemperaturebutmayrunslightlyhotorcoolatany
pointintimeduetothiscycling.Mostthermometersareslowto
reacttotemperaturechangeandwillnotprovideanaccurate
readingduetothiscycling.
Theovenprovidesaccuratetemperatures;however,itmaycook
fasterorslowerthanyourpreviousoven,sothetemperaturecan
beadjustedtopersonalizeitforyourcookingneeds.Itcanbe
changedtoFahrenheitorCelsius.
To Adjust Oven Temperature:
1. Press CLOCK/TOOLS until "TEMP CALIB" is displayed.
2. On some models, press "1" to adjust the drawer temperature
calibration. Press START, wait 10 seconds for the display to
change, and then continue with Step 3.
OR
Press START to adjust the oven temperature calibration. Wait
10 seconds for the display to change, and then continue with
Step 3.
3. Press the "3" keypad to increase the temperature in 5°F (3°C)
increments, or press the "6" keypad to decrease the
temperature in 5°F (3°C) increments. The offset range is from
-30°F to +30°F (-18°C to +18°C).
4. Press START or CANCEL UPPER to exit and display the time
of day.
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
NOTE: Settings are marked on the control knob.
The control knobs can be set to anywhere between H (High) and L
(Low). Push in and turn to setting.
I REMEMBER: When range is in use, the entire cooktop area
I
may become hot.
I
Ceramic Glass
The surface cooking area may glow red when an element is on.
Some parts of the surface cooking area may not glow red when an
element is on. The glow will also randomly cycle off and back on
again, even while on High, to keep the cooktop from extreme
temperatures. This is normal operation.
It is normal for the surface of light colored ceramic glass to appear
to change color when surface cooking areas are hot. As the glass
cools, it will return to its original color.
Clean the cooktop after each use to help avoid scratches, pitting,
abrasions and to condition the glass surface. Ceramic glass
cooktop cleaner and a cooktop scraper are also recommended for
stubborn soils. Do not use abrasive cleaners, cleaning pads or
harsh chemicals for cleaning. The Cooktop Care Kit contains all of
the items needed to clean and condition your ceramic glass
cooktop. Refer to the "Range Care" section for additional
information.
IMPORTANT: To avoid permanent damage to the cooktop surface
and to make soils easier to remove, clean the cooktop after each
use to remove all soils.
Avoid storing jars or cans above the cooktop. Dropping a heavy
or hard object onto the cooktop could crack the cooktop.
To avoid damage to the cooktop, do not leave a hot lid on the
cooktop. As the cooktop cools, air can become trapped
between the lid and the cooktop, and the ceramic glass could
break when the lid is removed.
For foods containing sugar in any form, clean up all spills and
soils as soon as possible. Allow the cooktop to cool down
slightly. Then, while wearing oven mitts, remove the spills using
a scraper while the surface is still warm. If sugary spills are
allowed to cool down, they can adhere to the cooktop and can
cause pitting and permanent marks.
To avoid scratches, do not slide cookware or bakeware across
the cooktop. Aluminum or copper bottoms and rough finishes
on cookware or bakeware could leave scratches or marks on
the cooktop.
Do not cook popcorn in prepackaged aluminum containers on
the cooktop. They could leave aluminum marks that cannot be
removed completely.
To avoid damage to the cooktop, do not allow objects that
could melt, such as plastic or aluminum foil, to touch any part
of the entire cooktop.
To avoid damage to the cooktop, do not use the cooktop as a
cutting board.
Use cookware about the same size as the surface cooking
area. Cookware should not extend more than 1/2"(1.3 cm)
outside the area.
i _ _ _ ._
," '_ >...................................B
/ \
! \
"..........................C
A. Surface cooking area
B. Cookware/canner
C. V2"(1.3 cm) maximum overhang
Use flat-bottomed cookware for best heat conduction and
energy efficiency. Cookware with rounded, warped, ribbed or
dented bottoms could cause uneven heating and poor cooking
results.
Determine flatness by placing the straight edge of a ruler
across the bottom of the cookware. While you rotate the ruler,
no space or light should be visible between it and the
cookware.
Cookware designed with slightly indented bottoms or small
expansion channels can be used.
Make sure the bottoms of pots and pans are clean and dry
before using them. Residue and water can leave deposits
when heated.
To avoid damage to the cooktop, do not cook foods directly on
the cooktop.
Cool<top On Indicator Light
The Cooktop On indicator light is located on the console panel.
When any control knob on the console panel is turned on, the
Cooktop On indicator light will glow.
Hot Surface Indicator Light
On ceramic glass models, the Hot Surface indicator light is located
on the console panel.
The Hot Surface indicator light will glow as long as any surface
cooking area is too hot to touch, even after the surface cooking
area is turned off.
10
TripleZoneCookingElement
TheTripleZonecookingelementoffersflexibilitydependingonthe
sizeofthecookware.Singlesizecanbeusedinthesamewayas
aregularelement.Thedualandtriplesizescombinethesingle,
dual,andouterelementandisrecommendedforlargercookware,
largerquantitiesoffoodandhomecanning.
y ......o. ....--
/ \
l'
/
\\\\
B
A. Triple
B. Dual
C. Single
NOTE: Settings are marked on the control knob.
Rapid Boil Element (Right Front Element)
The Rapid Boil cooking element offers additional cooking flexibility.
The Rapid Boil cooking element can be used to boil liquids faster.
The lowest melt setting can be used to prepare sauces, to brown
or saute foods and to keep foods at a low temperature. Use
cookware appropriate in size for the Rapid Boil cooking element.
A :: B
- ............. /
A.Rapid boil option
B.Lower heat option
NOTE: Settings are marked on the control knob.
Melt Element (Left Rear Element)
The Melt cooking element offers flexibility due to a wide range of
settings between High and Melt. The High heat option can be used
to boil small amounts of liquid quickly. To reduce the power setting,
turn the knob clockwise. The Melt setting is designed for delicate
foods that require low heat, such as when melting chocolate or
holding sauces. Use cookware appropriate in size for the Melt
cooking element.
_JJ- -Off -"
A , S
i
X
"--. ....... -J
A. High heat option
B. Melt option
NOTE: Settings are marked on the control knob.
Warm Zone Element
Food Poisoning Hazard
Do not let food sit for more than one hour before or
after cooking.
Doing so can result in food poisoning or sickness.
Use the Warm Zone element to keep cooked foods warm.
One hour is the recommended maximum time to maintain food
quality.
Do not use it to heat cold foods.
The Warm Zone element can be used alone or when any of the
other surface cooking areas are being used.
The Warm Zone element area will not glow red when cycling on.
However, the Cooktop On indicator light will be displayed when the
Warm Zone is in use.
Use only cookware recommended for oven and cooktop use.
Cover all foods with a lid or aluminum foil. When warming
baked goods, allow a small opening in the cover for moisture to
escape.
To avoid damage to the cooktop, do not use plastic wrap to
cover food because the plastic wrap may melt.
Use pot holders or oven mitts to remove food.
000
0 0
WARM ZONE
On/Off I Confirm
To Use:
1. To turn on, press WARM ZONE ON/OFF and then WARM
ZONE CONFIRM.
2. To turn off, press WARM ZONE ON/OFR
Cookware
IMPORTANT: Do not leave empty cookware on a hot surface
cooking area, element or surface burner.
Ideal cookware should have a flat bottom, straight sides and a well-
fitting lid, and the material should be of medium-to-heaw
thickness.
Rough finishes may scratch the cooktop. Aluminum and copper
may be used as a core or base in cookware. However, when used
as a base, they can leave permanent marks on the surfaces.
Cookware material is a factor in how quickly and evenly heat is
transferred, which affects cooking results. A nonstick finish has the
same characteristics as its base material. For example, aluminum
cookware with a nonstick finish will take on the properties of
aluminum.
Cookware with nonstick surfaces should not be used under the
broiler.
11
Checkforflatnessbyplacingthestraightedgeofaruleracrossthe
bottomofthecookware.Whileyourotatetheruler,nospaceor
lightshouldbevisiblebetweenitandthecookware.
Useflat-bottomedcookwareforbestcookingresultsandenergy
efficiency.Thecookwareshouldbeaboutthesamesizeasthe
cookingareaoutlinedonthecooktop.Cookwareshouldnotextend
morethanW' (1.3 cm) outside the area.
Use the following chart as a guide for cookware material
characteristics.
Aluminum
Heats quickly and evenly.
Suitable for all types of cooking.
Medium or heavy thickness is best for
most cooking tasks.
May leave aluminum residues, which
may be diminished if cleaned
immediately after cooking.
Home Canning
Canning can be performed on a glass smooth top cooking surface
or traditional coil element cooktop. When canning for long periods,
alternate the use of surface cooking areas or elements between
batches. This allows time for the most recently used areas to cool.
Center the canner on the largest surface cooking area or
element. On electric cooktops, canners should not extend
more than 1/2"(1.3 cm) beyond the surface cooking area or
element.
Do not place canner on 2 surface cooking areas or elements at
the same time.
On ceramic glass models, use only flat-bottomed canners to
avoid damage to the cooktop and elements.
For more information, contact your local agricultural extension
office, or refer to published home canning guides. Companies
that manufacture home canning products can also offer
assistance.
Ceramic or
Ceramic glass
Follow manufacturer's instructions.
Heats slowly, but unevenly.
Ideal results on low to medium heat
settings.
May scratch the cooktop.
Earthenware Follow manufacturer's instructions.
Use on low heat settings.
May scratch the cooktop.
Stainless steel
Heats quickly, but unevenly.
A core or base of aluminum or copper
on stainless steel provides even
heating.
12
Odorsandsmokearenormalwhentheovenisusedthefirstfew
timesorwhenitisheavilysoiled.
IMPORTANT:Thehealthofsomebirdsisextremelysensitiveto
thefumesgivenoffbytheoven.Exposuretothefumesmayresult
indeathtocertainbirds.Alwaysmovebirdstoanotherclosedand
well-ventilatedroom.
Aluminum Foil
IMPORTANT: To avoid permanent damage to the oven bottom
finish, do not line the oven bottom with any type of foil or liner.
For best cooking results, do not cover entire oven rack with foil
because air must be able to move freely.
Positioning Racks and Bakeware
IMPORTANT: To avoid permanent damage to the porcelain finish,
do not place food or bakeware directly on the oven door or bottom.
Bakeware
To cook food evenly, hot air must be able to circulate. Allow 2"
(5 cm) of space around bakeware and oven walls. Make sure that
no bakeware piece is directly over another.
Racks
Position racks before turning on the oven.
Do not position racks with bakeware on them.
Make sure racks are level.
To position a rack, pull it out to the stop position, raise the front
edge, and then lift out. Use the following illustration and charts as a
guide.
A
B
A. Ends of rack in position 3
B. Food in position 2
IMPORTANT: These rack positions are for flat racks. If a Max
Capacity Oven Rack is used, the rack position must be adjusted as
shown in the previous figure.
Multiple Rack Cooking
2-rack (non-convection): Use rack positions 2 and 5 or 3 and 6.
2-rack (convection): Use rack positions 2 and 5 or 3 and 6.
3-rack (convection): Use rack positions 2 and 7 and a Max
Capacity Oven Rack in rack position 5.
Baking Cookies and Layer Cakes on 2 Racks
Baking Layer Cakes
For best results when baking cakes on 2 racks, use the Bake
function, a flat rack in rack position 3 and a roll-out rack in rack
position 5. Place the cakes on the racks as shown. Keep at least 3"
(7.6 cm) of space between the front of the racks and the front
cakes.
The oven has 7 positions for a flat rack, as shown in the previous
illustration and the following table.
7 Broiling/searing meats, hamburgers,
steaks
3 or 4 Most baked goods, casseroles, frozen
foods
1 Large roasts or poultry
For hamburger patties to have a well-seared exterior and a rare
interior, use a flat rack in rack position 7. Side 1 should cook for
approximately 21/2to 3V2minutes. Side 2 should cook for
approximately 4 to 5 minutes. Expect a moderate degree of smoke
when broiling.
*If your model has a Max Capacity Oven Rack, the recessed ends
must be placed in the rack position above the desired position
of the food. See the following illustration.
Baking Cookies
For best results when baking cookies on 2 racks, use the
Convection Bake function, a flat rack in rack position 3 and a roll-
out rack in rack position 4.
13
Roll-Out Rack
The roll-out rack allows easy access to position and remove food in
the oven. It is not recommended to use the roll-out rack in the top
rack, position 7, or the bottom rack, position 1.
Open Position
3,
Lower the front of the rack assembly, and then gently slide
rack assembly into oven, bypassing the "V" cutouts. Push the
rack assembly into the oven until it stops at the ladder in the
back of the oven.
A B
C D
A. Rack frame
B. Sliding rack
Closed and Engaged Position
4,
A. "V" cutout
B. Rack guides
C. Ladder hook
D. Ladder
Reach through the rack to hold the sliding rack and the front
crossbar. Lift the front of the rack assembly, and then push the
rack assembly to the back of the oven. Lower the front of the
rack assembly so the ladder hook engages with the ladder on
both sides of the oven.
A
A. Rack frame
B. Sfiding rack
To Insert Roll-Out Rack
1. Angle the front of the rack assembly up, and then insert the
rack frame into the "V" cutout in the rack guides of the oven
cavity.
2,
A B
A. "V" cutout
B. Rack guides
Keep rack assembly lifted up at an angle, and then push in to
bypass the lower "V" cutout.
\
/
B
A. Sliding rack
B. Front crossbar
To Remove Roll-Out Rack
1. Push the sliding rack in completely so that it is in the closed
and engaged position.
2. Reach through the rack to hold the sliding rack and the front
crossbar. Lift the front of the rack assembly to disengage the
ladder hook from the ladders at the rear of the oven, and then
pull the rack assembly forward.
3. Using 2 hands, gently pull the sliding rack and the rack frame
at the same time to the "V" cutout. Angle the rack so that the
front is higher than the back, and then gently pull rack past "V"
cutout and then out of the oven.
To avoid damage to the sliding rack, do not place more than 25 Ibs
(11.4 kg) on the rack.
Do not clean the roll-out rack in a dishwasher. It may remove the
rack's lubricant and affect its ability to slide.
See the "General Cleaning" section for more information.
14
Oven Vent
A. Oven vent
The oven vent releases hot air and moisture from the oven, and
should not be blocked or covered. Blocking or covering the vent will
cause poor air circulation, affecting cooking and cleaning results.
Do not set plastics, paper or other items that could melt or burn
near the oven vent.
Sabbath Mode
The Sabbath Mode sets the oven to remain on in a bake setting
until turned off.
When the Sabbath Mode is set, only the Bake cycle will operate.
All other cooking and cleaning cycles are disabled. No tones will
sound, and the displays will not indicate temperature changes.
When the oven door is opened or closed, the oven light will not
turn on or off, and the heating elements will not turn on or off
immediately.
To Enable Sabbath Mode Capability (One Time Only):
1. Press CLOCK/TOOLS until "SABBATH" is displayed.
"OFR Press (1) for On" will scroll in the display.
2. Press the "1" keypad. "ON. Press (1) for Off" will scroll in the
display. Sabbath Mode can be activated for baking.
3. Press START or CANCEL UPPER to exit and display the time
of day.
NOTE: To disable the Sabbath Mode, repeat steps 1through 3
to change the status from "SABBATH ON" to "SABBATH OFF."
To Activate Sabbath Mode:
1. Press BAKE for the desired oven.
2. Press the number keypad to set a temperature other than
350°F (177°0).
3. Press START.
For timed cooking in Sabbath Mode, press COOK TIME, and
then the number keypads to set the desired cook time.
4. Press CLOCK/TOOLS. Three tones will sound. Then press
"7." "SAb" will appear in the display.
To Adjust Temperature (When Sabbath Mode is Running):
1. Press the number keypad as instructed by the scrolling text to
select the new temperature.
NOTE: The temperature adjustment will not appear on the
display. The scrolling text will be shown on the display as it was
before the keypad was pressed.
2. Press START.
To Deactivate Sabbath Mode:
Press CLOCK/TOOLS, and then press "7" to return to regular
baking, or press CANCEL for the desired oven to turn off the
range.
Baking and Roasting
Preheating
When beginning a Bake, Convect Bake or Convect Roast cycle, the
oven will begin preheating after Start is pressed. The oven will take
approximately 12 to 15 minutes to reach 350°F (177°C) with all of
the oven racks provided with your oven inside the oven cavity.
Higher temperatures will take longer to preheat. The preheat cycle
rapidly increases the oven temperature. The actual oven
temperature will go above your set temperature to offset the heat
lost when your oven door is opened to insert food. This ensures
that when you place your food in the oven, the oven will begin at
the proper temperature. Insert your food when the preheat tone
sounds. Do not open the door during preheat before the tone
sounds.
Oven Temperature
While in use, the oven elements will cycle on and off as needed to
maintain a consistent temperature, but they may run slightly hot or
cool at any point in time due to this cycling. Opening the oven door
while in use will release the hot air and cool the oven which could
impact the cooking time and performance. It is recommended to
use the oven light to monitor cooking progress.
NOTE: On models with convection, the convection fan may run in
the non-convection bake mode to improve oven performance.
Temperature Management System
The Temperature Management System electronically regulates the
oven heat levels during preheat and bake to maintain a precise
temperature range for optimal cooking results. The bake and broil
elements or burners cycle on and off in intervals. On convection
range models, the fan will run while preheating and may be cycled
on and off for short intervals during bake to provide the best
results. This feature is automatically activated when the oven is in
use.
Before baking and roasting, position racks according to
"Positioning Racks and Bakeware" section. When roasting, it is not
necessary to wait for the oven preheat cycle to end before putting
food in unless it is recommended in the recipe.
Steam Bake
The Steam Bake function works in conjunction with the steam rack
to provide additional moisture during baking. The steam rack
contains a water reservoir which heats up and releases steam in to
the oven cavity during the steam bake cycle. There are
3 preprogrammed food options to choose from: Breads, Desserts
and Fish, as well as a Refresh/Reheat option.
For best performance, place the steam rack in the lowest available
rack position in the cavity and pour 1Y2cups (350 mL) of water into
the reservoir. Do not fill past the MAX level indicated on the
reservoir.
After the steam bake cycle is complete, some water may remain in
the reservoir. This is normal. Wait for the oven to cool and discard
the water.
15
Broiling
When broiling, preheat the oven for 2 minutes before putting food
in unless recommended otherwise in the recipe. Position food on
grid in a broiler pan, and then place it in the center of the oven
rack.
IMPORTANT: Close the door to ensure proper broiling temperature.
Changing the temperature when broiling allows more precise
control when cooking. The lower the broil setting, the slower the
cooking. Thicker cuts and unevenly shaped pieces of meat, fish
and poultry may cook better at lower broil settings. Use racks 6 or
7 for broiling. Refer to the "Positioning Racks and Bakeware"
section for more information.
On lower settings, the broil element will cycle on and off to
maintain the proper temperature.
For best results, use a broiler pan and grid. It is designed to
drain juices and help avoid spatter and smoke.
If you would like to purchase a broiler pan, one may be
ordered. See the "Accessories" section.
Convection Cooking
In a convection oven, the fan-circulated hot air continually
distributes heat more evenly than the natural movement of air in a
standard thermal oven. This movement of hot air helps maintain a
consistent temperature throughout the oven, cooking foods more
evenly, crisping surfaces while sealing in moisture and yielding
crustier breads.
During convection baking or roasting, the bake, broil and
convection elements cycle on and off in intervals while the fan
circulates the hot air. During convection broiling, the broil and
convection elements cycle on and off.
If the oven door is opened during convection cooking, the fan will
turn off immediately. It will come back on when the oven door is
closed.
With convection cooking, most foods can be cooked at a lower
temperature and/or a shorter cooking time than in a standard
thermal oven. Depending upon the selected cooking mode,
EasyConvect TM conversion can automatically reduce the standard
recipe temperature and/or time you input for convection cooking. If
you choose not to use the EasyConvect TM conversion, use the
following table as a guide.
Convection Bake
25°F (15°C) lower temperature,
possible shortened cooking time
Convect Options
Convect Bake - Multiple-rack baking or cookies, biscuits, breads,
casseroles, tarts, tortes, cakes.
Convect Roast - Whole chicken or turkey, vegetables, pork roasts,
beef roasts.
Convect Broil - Thicker cuts or unevenly shaped pieces of meat,
fish or poultry.
Proofing Bread
Proofing bread prepares the dough for baking by activating the
yeast. Follow the recipe directions as a guide. Proof should be
used for fresh dough, thawed dough, and for the first and second
rise.
To Proof:
Before first proofing, place the dough in a lightly greased bowl and
cover loosely with wax paper, coated with shortening. Place on
rack guide 2 and close the oven door.
NOTE: Ifthe temperature of the oven is greater than 120°F (49°C),
"Oven Cooling" will be displayed until the temperature is less than
120°F (49°C).
1. Press PROOR
2. Press START.
Let the dough rise until nearly doubled insize. Proofing time
may vary depending on dough type and quantity.
3. Press CANCEL UPPER when finished proofing.
Before second proofing, shape the dough, place it in baking pan(s)
and cover loosely. Follow the same placement and control steps
above. Before baking, remove the cover.
NOTE: If the oven temperature is greater than 120°F (49°C), the
display will indicate "Oven Cooling" until the temperature is below
120°F (49°C).
Cook Time
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
To Set a Timed Cook:
1. Press BAKE or BROIL, or press an Easy Convect function.
2. Press the number keypads to enter a temperature other than
the one displayed.
3. Press COOK TIME. The cook time oven indicator light will light
up.
4. Press the number keypads to enter the length of time to cook.
5. Press START. The display will count down the time. When the
time ends, the oven will shut off automatically.
6. Press CANCEL for the desired oven to clear the display.
Convection Broil Shortened cooking time
16
ToSetaDelayedTimedCool<:
1. PressBAKEorBROIL,orpressanEasyConvectfunction.
2. Pressthenumberkeypadstoenteratemperatureotherthan
theonedisplayed.
3. PressCOOKTIME.Thecooktimeovenindicatorlightwilllight
up.
Pressnumberkeypadstoenterthelengthoftimetocook.
PressDELAYSTART.
4.
5.
6.
Press number keypads to enter the number of hours and/or
minutes you want to delay the start time.
7. Press START.
When the start time is reached, the oven will automatically turn on.
The temperature and/or time settings can be changed anytime
after pressing Start by repeating steps 2 through 7. When the set
cook time ends, the oven will shut off automatically.
8. Press CANCEL for the desired oven to clear the display.
Meat Probe
The meat probe accurately measures the internal temperature of
meat, poultry and casseroles with liquid and should be used in
determining the doneness of meat and poultry.
This meat probe operates as an independent device and is not
plugged into the oven. Follow the meat probe directions for using
the meat probe.
To avoid damage to the meat probe, do not leave the meat probe in
self-cleaning ovens while the cycle is running.
Baking Drawer
Food Poisoning Hazard
Do not let food sit for more than one hour before or
after cooking.
Doing so can result in food poisoning or sickness.
The Baking Drawer is highly recommended for baking frozen
foods. Use the temperature and medium cook time given on the
frozen food packaging. For example, if the packaging suggests a
cook time of 15 to 20 minutes, set the cooktime for 17 minutes.
Check food for doneness before removing from the Baking Drawer.
The Baking Drawer may also be used for conventional baking, slow
cooking and keeping hot cooked foods warm. It is not
recommended to prepare foods taller than the height of the baking
drawer rack handles or foods that may rise above 21/2'' (6.4 cm) in
the Baking Drawer.
IMPORTANT: Always use the baking drawer rack when using the
Baking Drawer.
II c
To
1.
2.
3.
4.
5.
6.
Bake with the Baking Drawer:
Press BAKING DRAWER BAKE.
Set the desired temperature between 170°F and 451 °F (75°C
and 233°C) using the number keypads. The default
temperature is 350°F (180°C).
Press START.
To change the temperature, repeat steps 2 and 3.
Press CANCEL LOWER when finished.
Remove food from the drawer.
To Slow Cool< with the Baking Drawer:
IMPORTANT: Brown roasts thoroughly before starting to slow
cook
1. Place food in the baking drawer.
2. Press BAKING DRAWER SLOW COOK.
3. Set the desired temperature between 145°F and 190°F (63°C
and 88°C) using the number keypads. The default
temperature is 170°F (75°C).
4. Press START.
5. (Optional) Set the desired cook time using the number
keypads.
6. Press START.
7. Press CANCEL LOWER when finished.
8. Remove food from the baking drawer.
To Keep Warm with the Baking Drawer:
Food must be at serving temperature before placing it in the
warmed drawer.
1.
2.
3.
4.
5.
6.
Place food in the baking drawer.
Press BAKING DRAWER KEEP WARM.
Set the desired temperature between 145°F and 190°F (63°C
and 88°C) using the number keypads. The default
temperature is 170°F (75°C).
Press START.
Press CANCEL LOWER when finished.
Remove food from the baking drawer.
Oven Light
The oven light is a standard 40-watt appliance bulb. Before
replacing, make sure the oven and cooktop are cool and the
control knobs are in the Off position.
To Replace:
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb by turning clockwise.
5. Replace bulb cover by turning clockwise.
6. Plug in range or reconnect power.
A B
A. Baking drawer
B. Baking drawer rack
C. Baking drawer rack handles
See the "General Cleaning" section for more information.
17
Clean Cycle
( AquoLift
Self-Cleaning
Technology
AquaLift ®Technology is an innovative cleaning solution that utilizes
heat and water to release baked-on spills from the oven in less
than 1 hour. This new cleaning technology is a low-heat, odor-free
alternative to traditional self-cleaning options.
Allow the oven to cool to room temperature before using the Clean
cycle. If your oven cavity is above 200°F (93°C), "Oven Cooling"
will appear in the display, and the Clean cycle will not be activated
until the oven cavity cools down.
To Clean:
1. Remove all racks and accessories from the oven cavity and
wipe excess soil. Use a plastic scraper to remove easily-
removed soils.
2.
Pour 2 cups (16 oz [500 mL]) of distilled or filtered water onto
the bottom of the empty oven and close the oven door.
IMPORTANT: Do not use chemicals or other additives with the
water. Do not open the oven door during the Clean cycle. The
water on the oven bottom is hot.
3. Press AQUALIFT SELF CLEAN and then START on the oven
control panel.
4. Allow 40 minutes for cleaning and cool down. A beep will
sound when the Clean cycle is complete.
5. Press CANCEL UPPER atthe end of the cycle. Cancel Upper
may be pressed at any time to stop the Clean cycle.
6.
Remove the residual water and loosened soils with a sponge
or cloth immediately after the Clean cycle is complete. Much
of the initial 2 cups (16 oz [500 mL]) of water will remain in the
oven after the cycle is completed. If additional soils remain,
leave a small amount of water in the oven bottom to assist with
the cleaning.
/
7.
If any soils remain, remove them with a non-scratch scrubbing
sponge or plastic scraper. Additional Clean cycles may be run
to help remove the stubborn soils.
IMPORTANT: Do not use oven cleaners. The use of
chemicals, including commercial oven cleaners or metal
scouring pads, may cause permanent damage to the porcelain
surface of the oven interior.
NOTES:
The range should be level to ensure that the entire surface of
the bottom of the oven cavity is covered by water at the
beginning of the Clean cycle.
For best results, use distilled or filtered water. Tap water may
leave mineral deposits on the oven bottom.
Before removing the residual water and loosened soils at the
end of the Clean cycle, insert a cloth or paper towel between
the lower edge of the oven door and the front frame to keep
water from spilling onto the front of the range and the floor.
Soil baked on through several cooking cycles will be more
difficult to remove with the Clean cycle.
Nonabrasive scrub sponges or eraser style cleaning pads
(without cleaners) can be effective for cleaning the oven cavity
walls, oven door and oven bottom for difficult soils. For best
results, moisten the pads and sponges before use.
Run an additional Clean cycle for stubborn soils.
affresh ®Kitchen Appliance Cleaner and affresh ®Cooktop
Cleaner may be used to clean the oven bottom, walls and door
when the oven has finished the cycle and returned to room
temperature. If affresh ®Cooktop Cleaner is used, it is
recommended to wipe out the cavity with distilled water as
well. Refer to the "Accessories" section for information on
ordering.
Additional AquaLift ®Technology Cleaning Kits may be
obtained by ordering Part Number W10423113RR See the
"Accessories" section for more information.
For assistance with AquaLift ®Technology, call 1-877-258-0808
in the U.S.A. or 1-800-807-6777 in Canada, or visit our website
at http:llwhirlpoolcorp.comlaqualift.
18
General Cleaning
IMPORTANT: Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Always follow label instructions on
cleaning products. For additional information, you can visit our
website at www.kitchenaid.com. In Canada, visit our website at
www. kitchenaid.ca.
Soap, water and a soft cloth or sponge are suggested first unless
otherwise noted.
EXTERIOR PORCELAIN ENAMEL SURFACES (on some
models)
Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the entire range is cool. These spills may
affect the finish.
Cleaning Method:
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing
pad:
Gently clean around the model/serial/rating plate because
scrubbing may remove numbers.
affresh ®Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See the "Accessories" section for more information.
STAINLESS STEEL (on some models)
NOTE: To avoid damage to stainless steel surfaces, do not use
soap-filled scouring pads, abrasive cleaners, Cooktop Cleaner,
steel-wool pads, gritty washcloths or abrasive paper towels.
Damage may occur to stainless steel surfaces, even with one-time
or limited use.
Cleaning Method:
Rub in direction of grain to avoid damaging.
affresh ®Stainless Steel Cleaner Part Number W10355016:
See the "Accessories" section for more information.
METALLIC PAINT (on some models)
Do not use abrasive cleaners, cleaners with bleach, rust removers,
ammonia or sodium hydroxide (lye) because paint surface may
stain.
CERAMIC GLASS
Cleaning Method:
Use affresh ®Cooktop Cleaner Part Number W10355051, Cooktop
Cleaning Pads Part Number W10391473 and Cooktop Scraper
Part Number WA906B to clean and remove stains from the
cooktop. Use Cooktop Protectant Part Number 31463A regularly
to avoid stain buildup, pitting and scratching, while conditioning the
cooktop for easier future cleaning. These can be ordered as
accessories. See "Accessories" section for more information. The
Cooktop Scraper uses razor blades. Store razor blades out of the
reach of children.
Do not use steel wool, abrasive powder cleansers, chlorine bleach,
rust remover or ammonia because damage may occur.
Light to moderate soil
Can be cleaned with damp paper towels or sponge. Light
stains should be addressed with cleaner and cleaning pad.
Sugary spills (jellies, candy, syrup)
Cooktop Scraper:
Scrape off sugary spills while the cooktop is still warm. You
may want to wear oven mitts while cleaning the cooktop.
affresh®Cooktop Cleaner and Cooktop Cleaning Pads:
Clean as soon as cooktop has cooled down. Rub product into
surface with a Cooktop Cleaning Pad. Continue rubbing until
white film disappears.
Heavy soil, dark streaks, specks and discoloration
Clean with Cooktop Cleaner or nonabrasive cleaner and
cleaning pad.
Burned-on soil
affresh®Cooktop Cleaner or nonabrasive cleanser with
Cooktop Cleaning Pads:
Clean as soon as cooktop has cooled down. Rub product into
soil with a Cooktop Cleaning Pad. Continue rubbing until white
film disappears.
Metal marks from aluminum and copper
affresh®Cooktop Cleaner and Cooktop Cleaning Pads:
Clean as soon as cooktop has cooled down. Rub product into
surface with a Cooktop Cleaning Pad. Continue rubbing until
white film disappears. The marks will not totally disappear, but
after many cleanings they will become less noticeable.
Tiny scratches and abrasions
affresh®Cooktop Cleaner and Cooktop Cleaning Pads:
Clean as soon as cooktop has cooled down. Rub product into
surface with a Cooktop Cleaning Pad. Continue rubbing until
white film disappears. Scratches and abrasions do not affect
cooking performance, and after many cleanings they will
become less noticeable.
CONTROL PANEL AND OVEN DOOR EXTERIOR
To avoid damage to the control panel, do not use abrasive
cleaners, steel-wool pads, gritty washcloths or abrasive paper
towels.
Cleaning Method:
Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
affresh ®Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See the "Accessories" section for more information.
OVEN RACKS
Cleaning Method:
Steel-wool pad
For racks that have discolored and are harder to slide, a light
coating of vegetable oil applied to the rack guides will help
them slide.
Dishwasher (steam rack water reservoir only, not racks):
Although the water reservoir is durable, it may lose its shine
and/or discolor when washed in a dishwasher.
BAKING DRAWER
Check that baking drawer is cool and empty before cleaning.
Food spills should be cleaned when oven cools. At high
temperatures, foods react with porcelain and staining, etching,
pitting or faint white spots can result.
Cleaning Method:
Mild detergent
OVEN CAVITY
Use AquaLift ®Technology regularly to clean oven spills.
Do not use oven cleaners.
Food spills should be cleaned when oven cools. At high
temperatures, foods react with porcelain and staining, etching,
pitting or faint white spots can result.
Cleaning Method:
Clean cycle: See the "Clean Cycle" section first.
19
Remove/Replace Drawer
Remove all items from inside the baking drawer or premium
storage drawer, and then allow the range to cool completely before
attempting to remove the drawer.
To Remove:
1. Open the drawer to its fully open position.
2. Using a flat-blade screwdriver, gently loosen the drawer from
the glide alignment notch, and then lift up the drawer
alignment tab from the glide.
A
3.
A. Flat-blade screwdriver
B. Drawer alignment tab
C. Drawer gfide notch
Repeat Step 2 on the other side. The drawer is no longer
attached to the drawer glides. Using both hands, pick up the
drawer to complete the removal.
To Replace:
1. Align the forward drawer notches with the notches in the
drawer glides on both sides. Place the rear alignment tabs into
the drawer glides on both sides.
A. Drawer alignment tab
B. Drawer glide notch
2. Push the drawer in all the way.
3. Gently open and close the drawer to ensure it is seated
properly on the glides on both sides.
First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call,
refer to the warranty page in this manual and scan the code there with your mobile device, or visit http://kitchenaid.custhelp.com. In
Canada, visit http://www.kitchenaid.ca.
Contact us by mail with any questions or concerns at the address below:
In the U.S.A.: In Canada:
KitchenAid Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
Please include a daytime phone number in your correspondence.
KitchenAid Brand Home Appliances
Customer eXperience Centre
200 - 6750 Century Ave.
Mississauga, Ontario L5N 0B7
Nothing will operate
Excessive heat around
cookware on cooktop
Power supply cord is unplugged - Plug into a grounded outlet.
ENERGY SAVE is active, and the display is blank - Press any keypad on the control to display the
time of day. See the "Electronic Oven Controls" section for more information.
Household fuse is blown, or a circuit breaker is tripped - Replace the fuse or reset the circuit breaker.
Ifthe problem continues, call an electrician.
The control displays an F9 or F9 E0 error code - The electrical outlet in the home may be miswired.
Contact a qualified electrician to verify the electrical supply.
Cookware is not the proper size - Use cookware about the same size as the surface cooking area,
element or surface burner. Cookware should not extend more than 1/2"(1.3 cm) outside the cooking area.
Cooktop element cycles on Element cycling due to a temperature limiter - This is normal operation. The element may cycle on
and off on High setting and off to keep the cooktop from overheating.
20
1 / 1

KitchenAid KSEG700EBS0 Le manuel du propriétaire

Catégorie
Cuisinières
Taper
Le manuel du propriétaire
Ce manuel convient également à

dans d''autres langues