KitchenAid YKSEB900ESS0 Le manuel du propriétaire

THANK YOU for purchasing this high-quality product. Register your range at www.kitchenaid.com. In Canada, register your range at

www. kitchenaid.ca.

For future reference, please make a note of your product model and serial numbers. These can be found on the label located on the

oven frame behind the top right side of the oven door.

Model Number Serial Number

Para una version de estas instrucciones en espa_ol, visite www.kitchenaid.com.

Debera tener a mano el nOmero de modelo y de serie, que estan ubicados en el marco del horno, detrAs del lado derecho superior de

la puerta del horno.

Table of Contents

RANGE SAFETY ........................................................................... 2

The Anti-Tip Bracket .................................................................. 2

KEY USAGE TIPS ......................................................................... 4

AquaLift ®Self-Cleaning Technology .......................................... 4

Surface Temperatures ............................................................... 4

Preheating .................................................................................. 4

Ceramic Glass Cooktop Cleaning ............................................. 4

FEATURE GUIDE .......................................................................... 5

Electronic Oven Controls ........................................................... 8

COO KTO P................................................................................... 10

Cookware ................................................................................. 11

Home Canning ......................................................................... 12

OVEN ........................................................................................... 13

Aluminum Foil........................................................................... 13

Positioning Racks and Bakeware ............................................ 13

Roll-Out Rack ........................................................................... 14

Oven Vent ................................................................................. 15

Sabbath Mode ......................................................................... 15

Baking and Roasting ................................................................ 15

Broiling ..................................................................................... 16

Convection Cooking ................................................................ 16

Proofing Bread ......................................................................... 16

Cook Time ................................................................................ 16

Meat Probe ............................................................................... 17

Baking Drawer .......................................................................... 17

Oven Light ................................................................................ 17

RANGE CARE ............................................................................. 18

Clean Cycle .............................................................................. 18

General Cleaning ...................................................................... 19

Remove/Replace Drawer ......................................................... 20

PROBLEM SOLVER ................................................................... 20

ACCESSORIES ........................................................................... 22

WAR RANTY ................................................................................ 23

W10722059B

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

The Anti-Tip Bracket

The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without having

the anti-tip bracket fastened down properly.

Tip Over Hazard

A child or adult can tip the range and be killed.

Verify the anti-tip bracket has been properly installed and engaged per installation instructions.

Re-engage anti-tip bracket if range is moved.

Do not operate range without anti-tip bracket installed and engaged.

Failure to follow these instructions can result in death or serious burns to children and adults.

Anti-Tip

"-Bracket

Range Foot

To verify the anti-tip bracket is installed and engaged:

• Slide range forward.

• Look for the anti-tip bracket securely attached to floor or wall.

• Slide range back so rear range foot is under anti-tip bracket.

• See installation instructions for details.

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

iMPORTANT SAFETY iNSTRUCTiONS

WARN(NG: To reduce the risk of fire, electrical shock,

injury to persons, or damage when using the range, follow

basic precautions, including the following:

[] WARNING: TO REDUCE THE RISK OF TIPPING OF

THE RANGE, THE RANGE MUST BE SECURED BY

PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK

IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE

RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET

SECURELY ATTACHED TO FLOOR OR WALL, AND

SLIDE RANGE BACK SO REAR RANGE FOOT IS

UNDER ANTI-TIP BRACKET.

[] CAUTION: Do not store items of interest to children in

cabinets above a range or on the backguard of a range -

children climbing on the range to reach items could be

seriously injured.

[] Proper Installation - Be sure the range is properly installed

and grounded by a qualified technician.

[] Never Use the Range for Warming or Heating the Room.

[] Do Not Leave Children Alone - Children should not be left

alone or unattended in area where the range is in use.

They should never be allowed to sit or stand on any part of

the range.

[] Wear Proper Apparel- Loose-fitting or hanging garments

should never be worn while using the range.

[] User Servicing - Do not repair or replace any part of the

range unless specifically recommended in the manual. All

other servicing should be referred to a qualified technician.

[] Storage in or on the Range - Flammable materials should

not be stored in an oven or near surface units.

[] Do Not Use Water on Grease Fires - Smother fire or flame

or use dry chemical or foam-type extinguisher.

[] Use Only Dry Potholders - Moist or damp potholders on

hot surfaces may result in burns from steam. Do not let

potholder touch hot heating elements. Do not use a towel

or other bulky cloth.

[] DO NOT TOUCH SURFACE UNITS OR AREAS NEAR

UNITS - Surface units may be hot even though they are

dark in color. Areas near surface units may become hot

enough to cause burns. During and after use, do not touch,

or let clothing or other flammable materials contact surface

units or areas near units until they have had sufficient time

to cool. Among those areas are the cooktop and surfaces

facing the cooktop.

[] Use Proper Pan Size - The range is equipped with one or

more surface units of different size. Select utensils having

flat bottoms large enough to cover the surface unit heating

element. The use of undersized utensils will expose a

portion of the heating element to direct contact and may

result in ignition of clothing. Proper relationship of utensil to

burner will also improve efficiency.

[] Never Leave Surface Units Unattended at High Heat

Settings - Boilover causes smoking and greasy spillovers

that may ignite.

[] Make Sure Reflector Pans or Drip Bowls Are in Place -

Absence of these pans or bowls during cooking may

subject wiring or components underneath to damage.

[] Protective Liners - Do not use aluminum foil to line surface

unit drip bowls or oven bottoms, except as suggested in

the manual. Improper installation of these liners may result

in a risk of electric shock, or fire.

[] Glazed Cooking Utensils - Only certain types of glass,

glass/ceramic, ceramic, earthenware, or other glazed

utensils are suitable for range-top service without breaking

due to the sudden change in temperature.

[] Utensil Handles Should Be Turned Inward and Not Extend

Over Adjacent Surface Units - To reduce the risk of burns,

ignition of flammable materials, and spillage due to

unintentional contact with the utensil, the handle of a

utensil should be positioned so that it is turned inward, and

does not extend over adjacent surface units.

[] Do Not Soak Removable Heating Elements - Heating

elements should never be immersed in water.

[] Do Not Cook on Broken Cooktop - If cooktop should

break, cleaning solutions and spillovers may penetrate the

broken cooktop and create a risk of electric shock. Contact

a qualified technician immediately.

[] Clean Cooktop With Caution - If a wet sponge or cloth is

used to wipe spills on a hot cooking area, be careful to

avoid steam burn. Some cleaners can produce noxious

fumes if applied to a hot surface.

[] Use Care When Opening Door - Let hot air or steam

escape before removing or replacing food.

[] Do Not Heat Unopened Food Containers - Build-up of

pressure may cause container to burst and result in injury.

[] Keep Oven Vent Ducts Unobstructed.

[] Placement of Oven Racks - Always place oven racks in

desired location while oven is cool. If rack must be moved

while oven is hot, do not let potholder contact hot heating

element in oven.

[] DO NOT TOUCH HEATING ELEMENTS OR INTERIOR

SURFACES OF OVEN - Heating elements may be hot even

though they are dark in color. Interior surfaces of an oven

become hot enough to cause burns. During and after use,

do not touch, or let clothing or other flammable materials

contact heating elements or interior surfaces of oven until

they have had sufficient time to cool. Other surfaces of the

appliance may become hot enough to cause burns - among

these surfaces are oven vent openings and surfaces near

these openings, oven doors, and windows of oven doors.

For self-cleaning ranges -

[] Do Not Clean Door Gasket - The door gasket is essential

for a good seal. Care should be taken not to rub, damage,

or move the gasket.

[] Do Not Use Oven Cleaners - No commercial oven cleaner

or oven liner protective coating of any kind should be used

in or around any part of the oven.

[] Clean Only Parts Listed in Manual.

[] Before Self-Cleaning the Oven - Remove broiler pan and

other utensils.

For units with ventilating hood -

[] Clean Ventilating Hoods Frequently - Grease should not

be allowed to accumulate on hood or filter.

[] When flambeing foods under the hood, turn the fan on.

SAVE THESE INSTRUCTIONS

AquaLift ®Self-Cleaning Technology

( AquoLift

Self-Cleaning

Technology

AquaLift ®Self-Cleaning Technology is a first-of-its-kind cleaning

solution designed to minimize the time, temperature and odors that

ordinarily come with traditional self-cleaning methods. With

AquaLift ®Self-Cleaning Technology, an exclusive coating on the

interior of the oven is activated with heat and water to release

baked-on soil. To use AquaLift _ Self-Cleaning Technology, simply

wipe out loose debris, pour water into the oven bottom and run the

AquaLift ®Self-Cleaning cycle. When the cycle finishes in under

1 hour at a lower temperature than in traditional self-cleaning

methods, just wipe out the remaining water and loose debris. See

the "Clean Cycle" section for more detailed instructions. For

additional information, frequently asked questions and videos on

using AquaLift _Self-Cleaning Technology, visit our website at

http:llwhirlpooleorp.comlaqualift.

Surface Temperatures

When the range is in use, all range surfaces may become hot,

such as the knobs and oven door.

Baking or Storage Drawer

When the oven is in use, the drawer may become hot. Do not store

plastics, cloth, or other items that could melt or burn in the drawer.

Oven Vent

The oven vent releases hot air and moisture from the oven, and

should not be blocked or covered. Do not set plastics, paper or

other items that could melt or burn near the oven vent.

Preheating

When beginning a Bake, Convect Bake or Convect Roast cycle, the

oven will begin preheating after Start is pressed. The oven will take

approximately 12 to 15 minutes to reach 350°F (177°C) with all of

the oven racks provided with your oven inside the oven cavity.

Higher temperatures will take longer to preheat. The preheat cycle

rapidly increases the oven temperature. The actual oven

temperature will go above your set temperature to offset the heat

lost when your oven door is opened to insert food. This ensures

that when you place your food in the oven, the oven will begin at

the proper temperature. Insert your food when the preheat tone

sounds. Do not open the door during preheat before the tone

sounds.

Ceramic Glass Cooktop Cleaning

To avoid damaging the cooktop, do not use steel wool, abrasive

powder cleansers, chlorine bleach, rust remover or ammonia.

1. Remove food/residue with the Cooktop Scraper.

2.

• For best results, use the Cooktop Scraper while the

cooktop is still warm, but not hot to the touch. It is

recommended to wear an oven mitt while scraping the

warm cooktop.

• Hold the Cooktop Scraper at approximately a 45° angle

against the glass surface and scrape the residue. It will be

necessary to apply pressure in order to remove the

residue.

Allow the cooktop to cool down completely before proceeding

to Step 2.

Apply a few dime-sized drops of affresh ®Cooktop Cleaner to

the affected areas.

3.

• Rub affresh ®Cooktop Cleaner onto the cooktop surface

with the blue Cooktop Cleaning Pad. Some pressure is

needed to remove stubborn stains.

• Allow the cleaner to dry to a white haze before proceeding

to Step 3.

Polish with a clean, dry cloth or a clean, dry paper towel.

• Repeat steps 1 through 3 as necessary for stubborn or

burned-on stains.

The Complete Cooktop Cleaner Kit is available for order including

the following:

• Cooktop Scraper

• affresh ®Cooktop Cleaner

• Blue Cooktop Cleaning Pads

See the "Accessories" section for part numbers and information on

ordering.

Thismanualcoversseveralmodels.Yourmodelmayhavesomeoralloftheitemslisted.RefertothismanualortheProductHelpsection

ofourwebsiteatwww.kitchenaid.comformoredetailedinstructions.InCanada,refertotheProductHelpSectionat

www.kitchenaid.ca.

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

Detay Oven

BakeI SteamI Bro, CookI 1 2 3

Bake Time Start Light

Proof I Keep 4 S 6

Warm

--EASY CONVECT --

Bake I Broil I Roast 000 7 8 9

o o

--BAKING DRAWER-- WARM ZONE

Clock Timer AquaLift

Bake I s_owI Keep On/OfflConfir m -- 0

Cook Warm Tools SET/OFF Self Clean

CLOCK/TOOLS Clock

The Clock can use a 12- or 24-hour cycle. See the "Electronic Oven Controls" section.

1. Press CLOCK/TOOLS until "CLOCK" is displayed.

2. Press START to change the time.

3. Press "3" for AM or "6" for PM.

4. Use the number keypad to set the time of day.

5. Press START to save the setting.

OVEN LIGHT

Oven cavity light The oven light is controlled by a keypad on the oven control panel. While the oven door is

closed, press OVEN LIGHT to turn the light on and off. When the oven door is opened, the

oven light will automatically come on.

START

Cooking start The Start keypad begins any oven function. If Start is not pressed within 2 minutes after

pressing a keypad, the function is canceled and the time of day is displayed.

BAKE

Baking and

roasting

1. Press BAKE.

2. Set the desired temperature between 170°F and 500°F (75°C and 260°C) using the

number keypads. The default temperature is 350°F (180°C).

3. Press START.

4. To change the temperature, repeat steps 2 and 3.

5. Press CANCEL UPPER when finished.

BROIL

Broiling

1, Press BROIL

2, Press the number keypads to set the desired temperature,

& Press START and aJlow the oven to preheat for 2 minutes,

4, To change the temperature, repeat steps 2 and 3,

5, Position the sookwa_ inthe oven, and then close the door,

6, Press CANCEL UPPER when finished.

KEEP WARM Hold warm

Food must be at serving temperature befere piacing it in the warmed oven,

1, Press KEEP WARM,

2. Set the desired temperature between 145;:F and 190°F (_C and 88'_C) using the

number keypads, The default temperature is 170_'F (75"C)

& Press START,

4, Press CANCEL UPPER when finished

EASY CONVECT

BROIL

Conv_t|on

coo_Jng

1. Press EASY CONVECT BROIL

2. Press"l'tohavetheovenautomatJcaHyconvertthetemperatureandtimeforconvection

baking, Press "2" to manualiy convert the temperature and ti_

& Press the number keypeds to set a temperature other than 325:'F (177' C) in 5''

increments between 170<F and 500'*F (77:'C and 26C_C),

4, Press START,

5. (Optional} Press the number keypads to set a cooktime,

5` Press START,

7. To change the temperature, repeat steps 2 and 3,

& Press CANCEL UPPER when fJnisl_ed

COOKTIME Timed cooking Timed Cooking aIiows the o_#ento be set to turn on at a certain time of day, cook for a set

length of time, and/or shut off auto_tically.

To set a Timed Cook or a Delayed Timed Cook, see 'Cook Time' section,

BAYJNG

DRAWER BAKE

(on some models)

Baking drawer

I. Press BAKING DRAWER BAKE,

2. Set the desired temperature between 170°F and 451 °F (75°C and 233_-C) using the

number keypads, The default temperature is 350':_F(t 80_C),

& Press START,

4, To change the temperature, repeat steps 2 and 3,

& Press CANCEL LOWER when finished,

BAKING

DRAWER KEEP

WARM

(onsomemodels)

Warming drawer Food must be at serving temperature before placing _ in the warmed oven,

1. Press BAKING DRAWER KEEP WARM

2. Set the desired temperature betvceen 145':_Fand I_°F (63°C and 880) using the

number keypads The default temperature is 170<F (75°0).

& Press START.

4. Press CANCEL LOWER when finished,

AQUALIFT SELF Clean cycle

CLEAN

See the "Clean Cycle" section

CLOCKJTOOLS Energy save Press and hoid CLOCK/TOOLS for 3 seconds to change status. The display will scroli

"Energy saver on' or 'Energy saver off,"

if Energy Save is on, the range will go into sleep mode after 5 minutes of inactivity: Any

keypad press wil_ activate the display, If Energy Save is off, the display will be on at n!l times

Electronic Oven Controls

Control Display

The display will flash when powered up or after a power loss. Press

CANCEL UPPER to clear. When the oven is not in use, the time of

day is displayed. Ifthe range is in Energy Save mode, the display

will be blank when not in use.

Tones

Tones are audible signals, indicating the following:

One Tone

• Valid keypad press

• Oven is preheated (long tone)

• Function has been entered

• Reminder, repeating each minute after the end-of-cycle tones

Three Tones

• Invalid keypad press

Four Tones

• End of cycle

Use the Clock/Tools keypad to change the tone settings.

Energy Save

The Energy Save mode puts the range into sleep mode and

reduces energy consumption.

To Activate the Energy Save Mode:

1. Press and hold CLOCK/TOOLS for 3 seconds. "Energy saver

on." will appear in the display.

2. The setting will be activated after 5 minutes.

To Deactivate the Energy Save Mode:

1. Press and hold CLOCK/TOOLS for 3 seconds. "Energy saver

off." will appear in the display.

2. The clock will reappear in the display, and the range can be

operated as usual.

Settings

Many features of the oven control can be adjusted to meet your

personal needs. These changes are made using the Clock/Tools

keypad.

Use the Clock/Tools keypad to scroll through the features that can

be changed. Each press of the Clock/Tools keypad will advance

the display to the next setting. After selecting the feature to be

changed, the control will prompt you for the required input. Then

press START or CANCEL UPPER to exit and display the time of

day. Details of all of the feature changes are explained in the

following sections.

Press CANCEL UPPER to exit Settings.

Clock

The Clock can use a 12- or 24-hour cycle.

1. Press CLOCK/TOOLS until "CLOCK" is displayed.

2. Press START to change the time.

3. Press "3" for AM or "6" for PM.

4. Use the number keypads to set the time of day.

5. Press START or CANCEL UPPER to exit and display the time

of day.

Fahrenheit and Celsius

The temperature is preset to Fahrenheit, but can be changed to

Celsius.

1. Press CLOCK/TOOLS until "TEMP UNIT" is displayed.

2. The current setting will be displayed.

3. Press the "1" keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Audible Tones Disable

Turns off all tones, including the end of cycle tone and key press

tones. Reminder tones are still active when all tones are disabled.

1. Press CLOCK/TOOLS until "SOUND" is displayed.

2. The current setting will be displayed.

3. Press the "1" keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Sound Volume

Sets the volume of the tone to either high or low.

1. Press CLOCK/TOOLS until "SOUND VOLUME" is displayed.

2. The current setting will be displayed.

3. Press the "1" keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

End of Cycle Tone

Activates or turns off the tones that sound at the end of a cycle.

1. Press CLOCK/TOOLS until "END TONE" is displayed.

2. The current setting will be displayed.

3. Press the "1" keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Key Press Tones

Activates or turns off the tones when a keypad is pressed.

1. Press CLOCK/TOOLS until "KEYPRESS TONE" is displayed.

2. The current setting will be displayed.

3. Press the "1" keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Reminder Tones Disable

Turns off the short repeating tone that sounds every 1 minute after

the end of cycle tones.

1. Press CLOCK/TOOLS until "REMINDER TONE" is displayed.

2. The current setting will be displayed.

3. Press the "1" keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

12/24 Hour Clock

1. Press CLOCK/TOOLS until "12/24 HOUR" is displayed.

2. The current setting will be displayed.

3. Press the "1" keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

DemoMode

IMPORTANT:Thisfeatureisintendedforuseonthesalesfloor

with120Vpowerconnectionandpermitsthecontrolfeaturestobe

demonstratedwithouttheoventurningon.Ifthisfeatureis

activated,theovenwillnotwork.

1. PressCLOCK/TOOLSuntil"DEMOMODE"isdisplayed.

2. Thecurrentsettingwillbedisplayed.

3. Pressthe"1"keypadtoadjustthesetting.

4. PressSTARTorCANCELUPPERtoexitanddisplaythetime

ofday.

SabbathMode

TheSabbathModesetstheoventoremainoninabakesetting

untilturnedoff.

WhentheSabbathModeisset,onlytheBakecyclewilloperate.

Allothercookingandcleaningcyclesaredisabled.Notoneswill

sound,andthedisplayswillnotindicatetemperaturechanges.

Whentheovendoorisopenedorclosed,theovenlightwillnot

turnonoroff,andtheheatingelementswillnotturnonoroff

immediately.

ToEnableSabbathModeCapability(OneTimeOnly):

1. PressCLOCK/TOOLSuntil"SABBATH"isdisplayed.

2. Thecurrentsettingwillbedisplayed.

3. Pressthe"1"keypadtoadjustthesetting.

4. PressSTARTorCANCELUPPERtoexitanddisplaythetime

ofday.

12-HourShutoff

Theovencontrolissettoautomaticallyshutofftheoven12hours

aftertheoveninitiatesacookorcleanfunction.Thiswillnot

interferewithanytimedordelaycookfunctions.

1. PressCLOCK/TOOLSuntil"12HrAUTO_OFF"isdisplayed.

2. Thecurrentsettingwillbedisplayed.

3. Pressthe"1"keypadtoadjustthesetting.

4. PressSTARTorCANCELUPPERtoexitanddisplaythetime

ofday.

Languages-ScrollingDisplayText

LanguageoptionsareEnglish,SpanishandFrench.

1. PressCLOCK/TOOLSuntil"LANGUAGE"isdisplayed.

2. Thecurrentsettingwillbedisplayed.

3. Pressthe"1"or"2"keypadtoselectthedesiredlanguage.

4. PressSTARTorCANCELUPPERtoexitanddisplaythetime

ofday.

OvenTemperatureOffsetControl

IMPORTANT:Donotuseathermometertomeasureoven

temperature.Elementswillcycleonandoffasneededtoprovide

consistenttemperaturebutmayrunslightlyhotorcoolatany

pointintimeduetothiscycling.Mostthermometersareslowto

reacttotemperaturechangeandwillnotprovideanaccurate

readingduetothiscycling.

Theovenprovidesaccuratetemperatures;however,itmaycook

fasterorslowerthanyourpreviousoven,sothetemperaturecan

beadjustedtopersonalizeitforyourcookingneeds.Itcanbe

changedtoFahrenheitorCelsius.

To Adjust Oven Temperature:

1. Press CLOCK/TOOLS until "TEMP CALIB" is displayed.

2. On some models, press "1" to adjust the drawer temperature

calibration. Press START, wait 10 seconds for the display to

change, and then continue with Step 3.

OR

Press START to adjust the oven temperature calibration. Wait

10 seconds for the display to change, and then continue with

Step 3.

3. Press the "3" keypad to increase the temperature in 5°F (3°C)

increments, or press the "6" keypad to decrease the

temperature in 5°F (3°C) increments. The offset range is from

-30°F to +30°F (-18°C to +18°C).

4. Press START or CANCEL UPPER to exit and display the time

of day.

Fire Hazard

Turn off all controls when done cooking.

Failure to do so can result in death or fire.

NOTE: Settings are marked on the control knob.

The control knobs can be set to anywhere between H (High) and L

(Low). Push in and turn to setting.

I REMEMBER: When range is in use, the entire cooktop area

I

may become hot.

I

Ceramic Glass

The surface cooking area may glow red when an element is on.

Some parts of the surface cooking area may not glow red when an

element is on. The glow will also randomly cycle off and back on

again, even while on High, to keep the cooktop from extreme

temperatures. This is normal operation.

It is normal for the surface of light colored ceramic glass to appear

to change color when surface cooking areas are hot. As the glass

cools, it will return to its original color.

Clean the cooktop after each use to help avoid scratches, pitting,

abrasions and to condition the glass surface. Ceramic glass

cooktop cleaner and a cooktop scraper are also recommended for

stubborn soils. Do not use abrasive cleaners, cleaning pads or

harsh chemicals for cleaning. The Cooktop Care Kit contains all of

the items needed to clean and condition your ceramic glass

cooktop. Refer to the "Range Care" section for additional

information.

IMPORTANT: To avoid permanent damage to the cooktop surface

and to make soils easier to remove, clean the cooktop after each

use to remove all soils.

• Avoid storing jars or cans above the cooktop. Dropping a heavy

or hard object onto the cooktop could crack the cooktop.

To avoid damage to the cooktop, do not leave a hot lid on the

cooktop. As the cooktop cools, air can become trapped

between the lid and the cooktop, and the ceramic glass could

break when the lid is removed.

• For foods containing sugar in any form, clean up all spills and

soils as soon as possible. Allow the cooktop to cool down

slightly. Then, while wearing oven mitts, remove the spills using

a scraper while the surface is still warm. If sugary spills are

allowed to cool down, they can adhere to the cooktop and can

cause pitting and permanent marks.

• To avoid scratches, do not slide cookware or bakeware across

the cooktop. Aluminum or copper bottoms and rough finishes

on cookware or bakeware could leave scratches or marks on

the cooktop.

• Do not cook popcorn in prepackaged aluminum containers on

the cooktop. They could leave aluminum marks that cannot be

removed completely.

• To avoid damage to the cooktop, do not allow objects that

could melt, such as plastic or aluminum foil, to touch any part

of the entire cooktop.

To avoid damage to the cooktop, do not use the cooktop as a

cutting board.

Use cookware about the same size as the surface cooking

area. Cookware should not extend more than 1/2"(1.3 cm)

outside the area.

i _ _ _ ._

," '_ >...................................B

/ \

! \

"..........................C

A. Surface cooking area

B. Cookware/canner

C. V2"(1.3 cm) maximum overhang

Use flat-bottomed cookware for best heat conduction and

energy efficiency. Cookware with rounded, warped, ribbed or

dented bottoms could cause uneven heating and poor cooking

results.

Determine flatness by placing the straight edge of a ruler

across the bottom of the cookware. While you rotate the ruler,

no space or light should be visible between it and the

cookware.

• Cookware designed with slightly indented bottoms or small

expansion channels can be used.

• Make sure the bottoms of pots and pans are clean and dry

before using them. Residue and water can leave deposits

when heated.

To avoid damage to the cooktop, do not cook foods directly on

the cooktop.

Cool<top On Indicator Light

The Cooktop On indicator light is located on the console panel.

When any control knob on the console panel is turned on, the

Cooktop On indicator light will glow.

Hot Surface Indicator Light

On ceramic glass models, the Hot Surface indicator light is located

on the console panel.

The Hot Surface indicator light will glow as long as any surface

cooking area is too hot to touch, even after the surface cooking

area is turned off.

10

TripleZoneCookingElement

TheTripleZonecookingelementoffersflexibilitydependingonthe

sizeofthecookware.Singlesizecanbeusedinthesamewayas

aregularelement.Thedualandtriplesizescombinethesingle,

dual,andouterelementandisrecommendedforlargercookware,

largerquantitiesoffoodandhomecanning.

y ......o. ....--

/ \

l'

/

\\\\

B

A. Triple

B. Dual

C. Single

NOTE: Settings are marked on the control knob.

Rapid Boil Element (Right Front Element)

The Rapid Boil cooking element offers additional cooking flexibility.

The Rapid Boil cooking element can be used to boil liquids faster.

The lowest melt setting can be used to prepare sauces, to brown

or saute foods and to keep foods at a low temperature. Use

cookware appropriate in size for the Rapid Boil cooking element.

A :: B

- ............. /

A.Rapid boil option

B.Lower heat option

NOTE: Settings are marked on the control knob.

Melt Element (Left Rear Element)

The Melt cooking element offers flexibility due to a wide range of

settings between High and Melt. The High heat option can be used

to boil small amounts of liquid quickly. To reduce the power setting,

turn the knob clockwise. The Melt setting is designed for delicate

foods that require low heat, such as when melting chocolate or

holding sauces. Use cookware appropriate in size for the Melt

cooking element.

_JJ- -Off -"

A , S

i

X

"--. ....... -J

A. High heat option

B. Melt option

NOTE: Settings are marked on the control knob.

Warm Zone Element

Food Poisoning Hazard

Do not let food sit for more than one hour before or

after cooking.

Doing so can result in food poisoning or sickness.

Use the Warm Zone element to keep cooked foods warm.

One hour is the recommended maximum time to maintain food

quality.

Do not use it to heat cold foods.

The Warm Zone element can be used alone or when any of the

other surface cooking areas are being used.

The Warm Zone element area will not glow red when cycling on.

However, the Cooktop On indicator light will be displayed when the

Warm Zone is in use.

• Use only cookware recommended for oven and cooktop use.

• Cover all foods with a lid or aluminum foil. When warming

baked goods, allow a small opening in the cover for moisture to

escape.

• To avoid damage to the cooktop, do not use plastic wrap to

cover food because the plastic wrap may melt.

• Use pot holders or oven mitts to remove food.

000

0 0

WARM ZONE

On/Off I Confirm

To Use:

1. To turn on, press WARM ZONE ON/OFF and then WARM

ZONE CONFIRM.

2. To turn off, press WARM ZONE ON/OFR

Cookware

IMPORTANT: Do not leave empty cookware on a hot surface

cooking area, element or surface burner.

Ideal cookware should have a flat bottom, straight sides and a well-

fitting lid, and the material should be of medium-to-heaw

thickness.

Rough finishes may scratch the cooktop. Aluminum and copper

may be used as a core or base in cookware. However, when used

as a base, they can leave permanent marks on the surfaces.

Cookware material is a factor in how quickly and evenly heat is

transferred, which affects cooking results. A nonstick finish has the

same characteristics as its base material. For example, aluminum

cookware with a nonstick finish will take on the properties of

aluminum.

Cookware with nonstick surfaces should not be used under the

broiler.

11

Checkforflatnessbyplacingthestraightedgeofaruleracrossthe

bottomofthecookware.Whileyourotatetheruler,nospaceor

lightshouldbevisiblebetweenitandthecookware.

Useflat-bottomedcookwareforbestcookingresultsandenergy

efficiency.Thecookwareshouldbeaboutthesamesizeasthe

cookingareaoutlinedonthecooktop.Cookwareshouldnotextend

morethanW' (1.3 cm) outside the area.

Use the following chart as a guide for cookware material

characteristics.

Aluminum

Heats quickly and evenly.

Suitable for all types of cooking.

Medium or heavy thickness is best for

most cooking tasks.

May leave aluminum residues, which

may be diminished if cleaned

immediately after cooking.

Home Canning

Canning can be performed on a glass smooth top cooking surface

or traditional coil element cooktop. When canning for long periods,

alternate the use of surface cooking areas or elements between

batches. This allows time for the most recently used areas to cool.

• Center the canner on the largest surface cooking area or

element. On electric cooktops, canners should not extend

more than 1/2"(1.3 cm) beyond the surface cooking area or

element.

• Do not place canner on 2 surface cooking areas or elements at

the same time.

On ceramic glass models, use only flat-bottomed canners to

avoid damage to the cooktop and elements.

For more information, contact your local agricultural extension

office, or refer to published home canning guides. Companies

that manufacture home canning products can also offer

assistance.

Ceramic or

Ceramic glass

• Follow manufacturer's instructions.

• Heats slowly, but unevenly.

• Ideal results on low to medium heat

settings.

• May scratch the cooktop.

Earthenware • Follow manufacturer's instructions.

• Use on low heat settings.

• May scratch the cooktop.

Stainless steel

Heats quickly, but unevenly.

A core or base of aluminum or copper

on stainless steel provides even

heating.

12

Odorsandsmokearenormalwhentheovenisusedthefirstfew

timesorwhenitisheavilysoiled.

IMPORTANT:Thehealthofsomebirdsisextremelysensitiveto

thefumesgivenoffbytheoven.Exposuretothefumesmayresult

indeathtocertainbirds.Alwaysmovebirdstoanotherclosedand

well-ventilatedroom.

Aluminum Foil

IMPORTANT: To avoid permanent damage to the oven bottom

finish, do not line the oven bottom with any type of foil or liner.

For best cooking results, do not cover entire oven rack with foil

because air must be able to move freely.

Positioning Racks and Bakeware

IMPORTANT: To avoid permanent damage to the porcelain finish,

do not place food or bakeware directly on the oven door or bottom.

Bakeware

To cook food evenly, hot air must be able to circulate. Allow 2"

(5 cm) of space around bakeware and oven walls. Make sure that

no bakeware piece is directly over another.

Racks

• Position racks before turning on the oven.

• Do not position racks with bakeware on them.

• Make sure racks are level.

To position a rack, pull it out to the stop position, raise the front

edge, and then lift out. Use the following illustration and charts as a

guide.

A

B

A. Ends of rack in position 3

B. Food in position 2

IMPORTANT: These rack positions are for flat racks. If a Max

Capacity Oven Rack is used, the rack position must be adjusted as

shown in the previous figure.

Multiple Rack Cooking

2-rack (non-convection): Use rack positions 2 and 5 or 3 and 6.

2-rack (convection): Use rack positions 2 and 5 or 3 and 6.

3-rack (convection): Use rack positions 2 and 7 and a Max

Capacity Oven Rack in rack position 5.

Baking Cookies and Layer Cakes on 2 Racks

Baking Layer Cakes

For best results when baking cakes on 2 racks, use the Bake

function, a flat rack in rack position 3 and a roll-out rack in rack

position 5. Place the cakes on the racks as shown. Keep at least 3"

(7.6 cm) of space between the front of the racks and the front

cakes.

The oven has 7 positions for a flat rack, as shown in the previous

illustration and the following table.

7 Broiling/searing meats, hamburgers,

steaks

3 or 4 Most baked goods, casseroles, frozen

foods

1 Large roasts or poultry

For hamburger patties to have a well-seared exterior and a rare

interior, use a flat rack in rack position 7. Side 1 should cook for

approximately 21/2to 3V2minutes. Side 2 should cook for

approximately 4 to 5 minutes. Expect a moderate degree of smoke

when broiling.

*If your model has a Max Capacity Oven Rack, the recessed ends

must be placed in the rack position above the desired position

of the food. See the following illustration.

Baking Cookies

For best results when baking cookies on 2 racks, use the

Convection Bake function, a flat rack in rack position 3 and a roll-

out rack in rack position 4.

13

Roll-Out Rack

The roll-out rack allows easy access to position and remove food in

the oven. It is not recommended to use the roll-out rack in the top

rack, position 7, or the bottom rack, position 1.

Open Position

3,

Lower the front of the rack assembly, and then gently slide

rack assembly into oven, bypassing the "V" cutouts. Push the

rack assembly into the oven until it stops at the ladder in the

back of the oven.

A B

C D

A. Rack frame

B. Sliding rack

Closed and Engaged Position

4,

A. "V" cutout

B. Rack guides

C. Ladder hook

D. Ladder

Reach through the rack to hold the sliding rack and the front

crossbar. Lift the front of the rack assembly, and then push the

rack assembly to the back of the oven. Lower the front of the

rack assembly so the ladder hook engages with the ladder on

both sides of the oven.

A

A. Rack frame

B. Sfiding rack

To Insert Roll-Out Rack

1. Angle the front of the rack assembly up, and then insert the

rack frame into the "V" cutout in the rack guides of the oven

cavity.

2,

A B

A. "V" cutout

B. Rack guides

Keep rack assembly lifted up at an angle, and then push in to

bypass the lower "V" cutout.

\

/

B

A. Sliding rack

B. Front crossbar

To Remove Roll-Out Rack

1. Push the sliding rack in completely so that it is in the closed

and engaged position.

2. Reach through the rack to hold the sliding rack and the front

crossbar. Lift the front of the rack assembly to disengage the

ladder hook from the ladders at the rear of the oven, and then

pull the rack assembly forward.

3. Using 2 hands, gently pull the sliding rack and the rack frame

at the same time to the "V" cutout. Angle the rack so that the

front is higher than the back, and then gently pull rack past "V"

cutout and then out of the oven.

To avoid damage to the sliding rack, do not place more than 25 Ibs

(11.4 kg) on the rack.

Do not clean the roll-out rack in a dishwasher. It may remove the

rack's lubricant and affect its ability to slide.

See the "General Cleaning" section for more information.

14

Oven Vent

A. Oven vent

The oven vent releases hot air and moisture from the oven, and

should not be blocked or covered. Blocking or covering the vent will

cause poor air circulation, affecting cooking and cleaning results.

Do not set plastics, paper or other items that could melt or burn

near the oven vent.

Sabbath Mode

The Sabbath Mode sets the oven to remain on in a bake setting

until turned off.

When the Sabbath Mode is set, only the Bake cycle will operate.

All other cooking and cleaning cycles are disabled. No tones will

sound, and the displays will not indicate temperature changes.

When the oven door is opened or closed, the oven light will not

turn on or off, and the heating elements will not turn on or off

immediately.

To Enable Sabbath Mode Capability (One Time Only):

1. Press CLOCK/TOOLS until "SABBATH" is displayed.

"OFR Press (1) for On" will scroll in the display.

2. Press the "1" keypad. "ON. Press (1) for Off" will scroll in the

display. Sabbath Mode can be activated for baking.

3. Press START or CANCEL UPPER to exit and display the time

of day.

NOTE: To disable the Sabbath Mode, repeat steps 1through 3

to change the status from "SABBATH ON" to "SABBATH OFF."

To Activate Sabbath Mode:

1. Press BAKE for the desired oven.

2. Press the number keypad to set a temperature other than

350°F (177°0).

3. Press START.

For timed cooking in Sabbath Mode, press COOK TIME, and

then the number keypads to set the desired cook time.

4. Press CLOCK/TOOLS. Three tones will sound. Then press

"7." "SAb" will appear in the display.

To Adjust Temperature (When Sabbath Mode is Running):

1. Press the number keypad as instructed by the scrolling text to

select the new temperature.

NOTE: The temperature adjustment will not appear on the

display. The scrolling text will be shown on the display as it was

before the keypad was pressed.

2. Press START.

To Deactivate Sabbath Mode:

Press CLOCK/TOOLS, and then press "7" to return to regular

baking, or press CANCEL for the desired oven to turn off the

range.

Baking and Roasting

Preheating

When beginning a Bake, Convect Bake or Convect Roast cycle, the

oven will begin preheating after Start is pressed. The oven will take

approximately 12 to 15 minutes to reach 350°F (177°C) with all of

the oven racks provided with your oven inside the oven cavity.

Higher temperatures will take longer to preheat. The preheat cycle

rapidly increases the oven temperature. The actual oven

temperature will go above your set temperature to offset the heat

lost when your oven door is opened to insert food. This ensures

that when you place your food in the oven, the oven will begin at

the proper temperature. Insert your food when the preheat tone

sounds. Do not open the door during preheat before the tone

sounds.

Oven Temperature

While in use, the oven elements will cycle on and off as needed to

maintain a consistent temperature, but they may run slightly hot or

cool at any point in time due to this cycling. Opening the oven door

while in use will release the hot air and cool the oven which could

impact the cooking time and performance. It is recommended to

use the oven light to monitor cooking progress.

NOTE: On models with convection, the convection fan may run in

the non-convection bake mode to improve oven performance.

Temperature Management System

The Temperature Management System electronically regulates the

oven heat levels during preheat and bake to maintain a precise

temperature range for optimal cooking results. The bake and broil

elements or burners cycle on and off in intervals. On convection

range models, the fan will run while preheating and may be cycled

on and off for short intervals during bake to provide the best

results. This feature is automatically activated when the oven is in

use.

Before baking and roasting, position racks according to

"Positioning Racks and Bakeware" section. When roasting, it is not

necessary to wait for the oven preheat cycle to end before putting

food in unless it is recommended in the recipe.

Steam Bake

The Steam Bake function works in conjunction with the steam rack

to provide additional moisture during baking. The steam rack

contains a water reservoir which heats up and releases steam in to

the oven cavity during the steam bake cycle. There are

3 preprogrammed food options to choose from: Breads, Desserts

and Fish, as well as a Refresh/Reheat option.

For best performance, place the steam rack in the lowest available

rack position in the cavity and pour 1Y2cups (350 mL) of water into

the reservoir. Do not fill past the MAX level indicated on the

reservoir.

After the steam bake cycle is complete, some water may remain in

the reservoir. This is normal. Wait for the oven to cool and discard

the water.

15

Broiling

When broiling, preheat the oven for 2 minutes before putting food

in unless recommended otherwise in the recipe. Position food on

grid in a broiler pan, and then place it in the center of the oven

rack.

IMPORTANT: Close the door to ensure proper broiling temperature.

Changing the temperature when broiling allows more precise

control when cooking. The lower the broil setting, the slower the

cooking. Thicker cuts and unevenly shaped pieces of meat, fish

and poultry may cook better at lower broil settings. Use racks 6 or

7 for broiling. Refer to the "Positioning Racks and Bakeware"

section for more information.

On lower settings, the broil element will cycle on and off to

maintain the proper temperature.

• For best results, use a broiler pan and grid. It is designed to

drain juices and help avoid spatter and smoke.

If you would like to purchase a broiler pan, one may be

ordered. See the "Accessories" section.

Convection Cooking

In a convection oven, the fan-circulated hot air continually

distributes heat more evenly than the natural movement of air in a

standard thermal oven. This movement of hot air helps maintain a

consistent temperature throughout the oven, cooking foods more

evenly, crisping surfaces while sealing in moisture and yielding

crustier breads.

During convection baking or roasting, the bake, broil and

convection elements cycle on and off in intervals while the fan

circulates the hot air. During convection broiling, the broil and

convection elements cycle on and off.

If the oven door is opened during convection cooking, the fan will

turn off immediately. It will come back on when the oven door is

closed.

With convection cooking, most foods can be cooked at a lower

temperature and/or a shorter cooking time than in a standard

thermal oven. Depending upon the selected cooking mode,

EasyConvect TM conversion can automatically reduce the standard

recipe temperature and/or time you input for convection cooking. If

you choose not to use the EasyConvect TM conversion, use the

following table as a guide.

Convection Bake

25°F (15°C) lower temperature,

possible shortened cooking time

Convect Options

Convect Bake - Multiple-rack baking or cookies, biscuits, breads,

casseroles, tarts, tortes, cakes.

Convect Roast - Whole chicken or turkey, vegetables, pork roasts,

beef roasts.

Convect Broil - Thicker cuts or unevenly shaped pieces of meat,

fish or poultry.

Proofing Bread

Proofing bread prepares the dough for baking by activating the

yeast. Follow the recipe directions as a guide. Proof should be

used for fresh dough, thawed dough, and for the first and second

rise.

To Proof:

Before first proofing, place the dough in a lightly greased bowl and

cover loosely with wax paper, coated with shortening. Place on

rack guide 2 and close the oven door.

NOTE: Ifthe temperature of the oven is greater than 120°F (49°C),

"Oven Cooling" will be displayed until the temperature is less than

120°F (49°C).

1. Press PROOR

2. Press START.

Let the dough rise until nearly doubled insize. Proofing time

may vary depending on dough type and quantity.

3. Press CANCEL UPPER when finished proofing.

Before second proofing, shape the dough, place it in baking pan(s)

and cover loosely. Follow the same placement and control steps

above. Before baking, remove the cover.

NOTE: If the oven temperature is greater than 120°F (49°C), the

display will indicate "Oven Cooling" until the temperature is below

120°F (49°C).

Cook Time

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

To Set a Timed Cook:

1. Press BAKE or BROIL, or press an Easy Convect function.

2. Press the number keypads to enter a temperature other than

the one displayed.

3. Press COOK TIME. The cook time oven indicator light will light

up.

4. Press the number keypads to enter the length of time to cook.

5. Press START. The display will count down the time. When the

time ends, the oven will shut off automatically.

6. Press CANCEL for the desired oven to clear the display.

Convection Broil Shortened cooking time

16

ToSetaDelayedTimedCool<:

1. PressBAKEorBROIL,orpressanEasyConvectfunction.

2. Pressthenumberkeypadstoenteratemperatureotherthan

theonedisplayed.

3. PressCOOKTIME.Thecooktimeovenindicatorlightwilllight

up.

Pressnumberkeypadstoenterthelengthoftimetocook.

PressDELAYSTART.

4.

5.

6.

Press number keypads to enter the number of hours and/or

minutes you want to delay the start time.

7. Press START.

When the start time is reached, the oven will automatically turn on.

The temperature and/or time settings can be changed anytime

after pressing Start by repeating steps 2 through 7. When the set

cook time ends, the oven will shut off automatically.

8. Press CANCEL for the desired oven to clear the display.

Meat Probe

The meat probe accurately measures the internal temperature of

meat, poultry and casseroles with liquid and should be used in

determining the doneness of meat and poultry.

This meat probe operates as an independent device and is not

plugged into the oven. Follow the meat probe directions for using

the meat probe.

To avoid damage to the meat probe, do not leave the meat probe in

self-cleaning ovens while the cycle is running.

Baking Drawer

Food Poisoning Hazard

Do not let food sit for more than one hour before or

after cooking.

Doing so can result in food poisoning or sickness.

The Baking Drawer is highly recommended for baking frozen

foods. Use the temperature and medium cook time given on the

frozen food packaging. For example, if the packaging suggests a

cook time of 15 to 20 minutes, set the cooktime for 17 minutes.

Check food for doneness before removing from the Baking Drawer.

The Baking Drawer may also be used for conventional baking, slow

cooking and keeping hot cooked foods warm. It is not

recommended to prepare foods taller than the height of the baking

drawer rack handles or foods that may rise above 21/2'' (6.4 cm) in

the Baking Drawer.

IMPORTANT: Always use the baking drawer rack when using the

Baking Drawer.

II c

To

1.

2.

3.

4.

5.

6.

Bake with the Baking Drawer:

Press BAKING DRAWER BAKE.

Set the desired temperature between 170°F and 451 °F (75°C

and 233°C) using the number keypads. The default

temperature is 350°F (180°C).

Press START.

To change the temperature, repeat steps 2 and 3.

Press CANCEL LOWER when finished.

Remove food from the drawer.

To Slow Cool< with the Baking Drawer:

IMPORTANT: Brown roasts thoroughly before starting to slow

cook

1. Place food in the baking drawer.

2. Press BAKING DRAWER SLOW COOK.

3. Set the desired temperature between 145°F and 190°F (63°C

and 88°C) using the number keypads. The default

temperature is 170°F (75°C).

4. Press START.

5. (Optional) Set the desired cook time using the number

keypads.

6. Press START.

7. Press CANCEL LOWER when finished.

8. Remove food from the baking drawer.

To Keep Warm with the Baking Drawer:

Food must be at serving temperature before placing it in the

warmed drawer.

1.

2.

3.

4.

5.

6.

Place food in the baking drawer.

Press BAKING DRAWER KEEP WARM.

Set the desired temperature between 145°F and 190°F (63°C

and 88°C) using the number keypads. The default

temperature is 170°F (75°C).

Press START.

Press CANCEL LOWER when finished.

Remove food from the baking drawer.

Oven Light

The oven light is a standard 40-watt appliance bulb. Before

replacing, make sure the oven and cooktop are cool and the

control knobs are in the Off position.

To Replace:

1. Unplug range or disconnect power.

2. Turn the glass bulb cover in the back of the oven

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.

4. Replace bulb by turning clockwise.

5. Replace bulb cover by turning clockwise.

6. Plug in range or reconnect power.

A B

A. Baking drawer

B. Baking drawer rack

C. Baking drawer rack handles

See the "General Cleaning" section for more information.

17

Clean Cycle

( AquoLift

Self-Cleaning

Technology

AquaLift ®Technology is an innovative cleaning solution that utilizes

heat and water to release baked-on spills from the oven in less

than 1 hour. This new cleaning technology is a low-heat, odor-free

alternative to traditional self-cleaning options.

Allow the oven to cool to room temperature before using the Clean

cycle. If your oven cavity is above 200°F (93°C), "Oven Cooling"

will appear in the display, and the Clean cycle will not be activated

until the oven cavity cools down.

To Clean:

1. Remove all racks and accessories from the oven cavity and

wipe excess soil. Use a plastic scraper to remove easily-

removed soils.

2.

Pour 2 cups (16 oz [500 mL]) of distilled or filtered water onto

the bottom of the empty oven and close the oven door.

IMPORTANT: Do not use chemicals or other additives with the

water. Do not open the oven door during the Clean cycle. The

water on the oven bottom is hot.

3. Press AQUALIFT SELF CLEAN and then START on the oven

control panel.

4. Allow 40 minutes for cleaning and cool down. A beep will

sound when the Clean cycle is complete.

5. Press CANCEL UPPER atthe end of the cycle. Cancel Upper

may be pressed at any time to stop the Clean cycle.

6.

Remove the residual water and loosened soils with a sponge

or cloth immediately after the Clean cycle is complete. Much

of the initial 2 cups (16 oz [500 mL]) of water will remain in the

oven after the cycle is completed. If additional soils remain,

leave a small amount of water in the oven bottom to assist with

the cleaning.

/

7.

If any soils remain, remove them with a non-scratch scrubbing

sponge or plastic scraper. Additional Clean cycles may be run

to help remove the stubborn soils.

IMPORTANT: Do not use oven cleaners. The use of

chemicals, including commercial oven cleaners or metal

scouring pads, may cause permanent damage to the porcelain

surface of the oven interior.

NOTES:

• The range should be level to ensure that the entire surface of

the bottom of the oven cavity is covered by water at the

beginning of the Clean cycle.

• For best results, use distilled or filtered water. Tap water may

leave mineral deposits on the oven bottom.

• Before removing the residual water and loosened soils at the

end of the Clean cycle, insert a cloth or paper towel between

the lower edge of the oven door and the front frame to keep

water from spilling onto the front of the range and the floor.

• Soil baked on through several cooking cycles will be more

difficult to remove with the Clean cycle.

• Nonabrasive scrub sponges or eraser style cleaning pads

(without cleaners) can be effective for cleaning the oven cavity

walls, oven door and oven bottom for difficult soils. For best

results, moisten the pads and sponges before use.

• Run an additional Clean cycle for stubborn soils.

• affresh ®Kitchen Appliance Cleaner and affresh ®Cooktop

Cleaner may be used to clean the oven bottom, walls and door

when the oven has finished the cycle and returned to room

temperature. If affresh ®Cooktop Cleaner is used, it is

recommended to wipe out the cavity with distilled water as

well. Refer to the "Accessories" section for information on

ordering.

• Additional AquaLift ®Technology Cleaning Kits may be

obtained by ordering Part Number W10423113RR See the

"Accessories" section for more information.

• For assistance with AquaLift ®Technology, call 1-877-258-0808

in the U.S.A. or 1-800-807-6777 in Canada, or visit our website

at http:llwhirlpoolcorp.comlaqualift.

18

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are off and

the oven and cooktop are cool. Always follow label instructions on

cleaning products. For additional information, you can visit our

website at www.kitchenaid.com. In Canada, visit our website at

www. kitchenaid.ca.

Soap, water and a soft cloth or sponge are suggested first unless

otherwise noted.

EXTERIOR PORCELAIN ENAMEL SURFACES (on some

models)

Food spills containing acids, such as vinegar and tomato, should

be cleaned as soon as the entire range is cool. These spills may

affect the finish.

Cleaning Method:

• Glass cleaner, mild liquid cleaner or nonabrasive scrubbing

pad:

Gently clean around the model/serial/rating plate because

scrubbing may remove numbers.

• affresh ®Kitchen and Appliance Cleaner Part Number

W10355010 (not included):

See the "Accessories" section for more information.

STAINLESS STEEL (on some models)

NOTE: To avoid damage to stainless steel surfaces, do not use

soap-filled scouring pads, abrasive cleaners, Cooktop Cleaner,

steel-wool pads, gritty washcloths or abrasive paper towels.

Damage may occur to stainless steel surfaces, even with one-time

or limited use.

Cleaning Method:

Rub in direction of grain to avoid damaging.

• affresh ®Stainless Steel Cleaner Part Number W10355016:

See the "Accessories" section for more information.

METALLIC PAINT (on some models)

Do not use abrasive cleaners, cleaners with bleach, rust removers,

ammonia or sodium hydroxide (lye) because paint surface may

stain.

CERAMIC GLASS

Cleaning Method:

Use affresh ®Cooktop Cleaner Part Number W10355051, Cooktop

Cleaning Pads Part Number W10391473 and Cooktop Scraper

Part Number WA906B to clean and remove stains from the

cooktop. Use Cooktop Protectant Part Number 31463A regularly

to avoid stain buildup, pitting and scratching, while conditioning the

cooktop for easier future cleaning. These can be ordered as

accessories. See "Accessories" section for more information. The

Cooktop Scraper uses razor blades. Store razor blades out of the

reach of children.

Do not use steel wool, abrasive powder cleansers, chlorine bleach,

rust remover or ammonia because damage may occur.

Light to moderate soil

• Can be cleaned with damp paper towels or sponge. Light

stains should be addressed with cleaner and cleaning pad.

Sugary spills (jellies, candy, syrup)

• Cooktop Scraper:

Scrape off sugary spills while the cooktop is still warm. You

may want to wear oven mitts while cleaning the cooktop.

• affresh®Cooktop Cleaner and Cooktop Cleaning Pads:

Clean as soon as cooktop has cooled down. Rub product into

surface with a Cooktop Cleaning Pad. Continue rubbing until

white film disappears.

Heavy soil, dark streaks, specks and discoloration

• Clean with Cooktop Cleaner or nonabrasive cleaner and

cleaning pad.

Burned-on soil

affresh®Cooktop Cleaner or nonabrasive cleanser with

Cooktop Cleaning Pads:

Clean as soon as cooktop has cooled down. Rub product into

soil with a Cooktop Cleaning Pad. Continue rubbing until white

film disappears.

Metal marks from aluminum and copper

• affresh®Cooktop Cleaner and Cooktop Cleaning Pads:

Clean as soon as cooktop has cooled down. Rub product into

surface with a Cooktop Cleaning Pad. Continue rubbing until

white film disappears. The marks will not totally disappear, but

after many cleanings they will become less noticeable.

Tiny scratches and abrasions

• affresh®Cooktop Cleaner and Cooktop Cleaning Pads:

Clean as soon as cooktop has cooled down. Rub product into

surface with a Cooktop Cleaning Pad. Continue rubbing until

white film disappears. Scratches and abrasions do not affect

cooking performance, and after many cleanings they will

become less noticeable.

CONTROL PANEL AND OVEN DOOR EXTERIOR

To avoid damage to the control panel, do not use abrasive

cleaners, steel-wool pads, gritty washcloths or abrasive paper

towels.

Cleaning Method:

• Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on

panel.

• affresh ®Kitchen and Appliance Cleaner Part Number

W10355010 (not included):

See the "Accessories" section for more information.

OVEN RACKS

Cleaning Method:

• Steel-wool pad

• For racks that have discolored and are harder to slide, a light

coating of vegetable oil applied to the rack guides will help

them slide.

• Dishwasher (steam rack water reservoir only, not racks):

Although the water reservoir is durable, it may lose its shine

and/or discolor when washed in a dishwasher.

BAKING DRAWER

Check that baking drawer is cool and empty before cleaning.

Food spills should be cleaned when oven cools. At high

temperatures, foods react with porcelain and staining, etching,

pitting or faint white spots can result.

Cleaning Method:

• Mild detergent

OVEN CAVITY

Use AquaLift ®Technology regularly to clean oven spills.

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high

temperatures, foods react with porcelain and staining, etching,

pitting or faint white spots can result.

Cleaning Method:

• Clean cycle: See the "Clean Cycle" section first.

19

Remove/Replace Drawer

Remove all items from inside the baking drawer or premium

storage drawer, and then allow the range to cool completely before

attempting to remove the drawer.

To Remove:

1. Open the drawer to its fully open position.

2. Using a flat-blade screwdriver, gently loosen the drawer from

the glide alignment notch, and then lift up the drawer

alignment tab from the glide.

A

3.

A. Flat-blade screwdriver

B. Drawer alignment tab

C. Drawer gfide notch

Repeat Step 2 on the other side. The drawer is no longer

attached to the drawer glides. Using both hands, pick up the

drawer to complete the removal.

To Replace:

1. Align the forward drawer notches with the notches in the

drawer glides on both sides. Place the rear alignment tabs into

the drawer glides on both sides.

A. Drawer alignment tab

B. Drawer glide notch

2. Push the drawer in all the way.

3. Gently open and close the drawer to ensure it is seated

properly on the glides on both sides.

First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call,

refer to the warranty page in this manual and scan the code there with your mobile device, or visit http://kitchenaid.custhelp.com. In

Canada, visit http://www.kitchenaid.ca.

Contact us by mail with any questions or concerns at the address below:

In the U.S.A.: In Canada:

KitchenAid Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

KitchenAid Brand Home Appliances

Customer eXperience Centre

200 - 6750 Century Ave.

Mississauga, Ontario L5N 0B7

Nothing will operate

Excessive heat around

cookware on cooktop

Power supply cord is unplugged - Plug into a grounded outlet.

ENERGY SAVE is active, and the display is blank - Press any keypad on the control to display the

time of day. See the "Electronic Oven Controls" section for more information.

Household fuse is blown, or a circuit breaker is tripped - Replace the fuse or reset the circuit breaker.

Ifthe problem continues, call an electrician.

The control displays an F9 or F9 E0 error code - The electrical outlet in the home may be miswired.

Contact a qualified electrician to verify the electrical supply.

Cookware is not the proper size - Use cookware about the same size as the surface cooking area,

element or surface burner. Cookware should not extend more than 1/2"(1.3 cm) outside the cooking area.

Cooktop element cycles on Element cycling due to a temperature limiter - This is normal operation. The element may cycle on

and off on High setting and off to keep the cooktop from overheating.

20

La page charge ...

KitchenAid YKSEB900ESS0 Le manuel du propriétaire

Ce manuel convient également à

KitchenAid YKSEB900ESS0 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents