Thermador KBURT3651A Manuel utilisateur

Marque: Thermador

Modèle: KBURT3651A

Catégorie: Frigos

Taper: Manuel utilisateur

Ce manuel convient également à

USE & CARE GUIDE

For Built-in Refrigerators

MANUAL DE USO Y

CUIDADO

Para los refrigeradores

empotrados

GUIDE

D’UTILISATION ET

D’ENTRETIEN

Pour réfrigérateurs encastrés

Bottom Mount Model/

Modelo con montaje inferior/

Modèle avec congélateur

en dessous

KBULT3651A, KBURT3651A

KBULT3661A, KBURT3661A

KBULT3671A, KBURT3671A

For questions about features, operation/performance,

parts accessories or service, call: 1-800-735-4328

In Canada, call for assistance 1-800-735-4328, for

installation and service, call: 1-800-735-4328 or visit

our website at... www.thermador.com

Para consultas respecto a características, operación/

desempeño, partes, accesorios o servicio, llame al:

1-800-735-4328

En Canadá, para obtener asistencia llame al

1-800-735-4328, para instalación y servicio llame al:

1-800-735-4328 o visite nuestra página de Internet...

www.thermador.com

Au Canada, pour assistance, composer le

1-800-735-4328, pour installation ou service le

1-800-735-4328 ou visitez notre site web à...

www.thermador.com

2302753

TABLE OF CONTENTS

REFRIGERATOR SAFETY .............................................................3

Proper Disposal of Your Old Refrigerator....................................3

BEFORE USE..................................................................................4

REFRIGERATOR USE....................................................................4

Power On/Off Switch ...................................................................4

Normal Sounds ............................................................................5

Ensuring Proper Air Circulation....................................................5

Using the Controls .......................................................................5

REFRIGERATOR FEATURES ........................................................6

Water Filtration System................................................................6

Refrigerator Shelves.....................................................................7

Deli Pan ........................................................................................8

Crisper Drawer and Cover ...........................................................8

Covered Utility Bin .......................................................................8

Wine Rack ....................................................................................8

FREEZER FEATURES....................................................................9

Ice Maker and Storage Bin ..........................................................9

Pull-out Freezer Basket................................................................9

DOOR FEATURES ........................................................................10

Door Bins....................................................................................10

REFRIGERATOR CARE ...............................................................10

Cleaning......................................................................................10

Changing the Light Bulbs...........................................................11

Power Interruptions....................................................................11

Vacation and Moving Care.........................................................11

TROUBLESHOOTING ..................................................................12

ASSISTANCE OR SERVICE.........................................................14

In the U.S.A. ...............................................................................14

In Canada ...................................................................................14

Replacement Parts.....................................................................14

WATER FILTER CERTIFICATIONS.............................................14

PRODUCT DATA SHEETS...........................................................15

WARRANTY ..................................................................................16

ÍNDICE

SEGURIDAD DEL REFRIGERADOR...........................................17

Cómo deshacerse de su refrigerador viejo ...............................17

ANTES DE USAR..........................................................................18

USO DE SU REFRIGERADOR.....................................................18

Interruptor de Encendido/Apagado...........................................18

Sonidos normales ......................................................................19

Cómo asegurar la debida circulación del aire...........................19

Uso de los controles ..................................................................20

CARACTERÍSTICAS DEL REFRIGERADOR..............................21

Sistema de filtración de agua ....................................................21

Estantes del refrigerador............................................................21

Compartimiento para carnes frías .............................................22

Cajón para verduras y tapa........................................................22

Compartimiento de uso general con tapa.................................23

Portabotellas ..............................................................................23

CARACTERÍSTICAS DEL CONGELADOR.................................23

Fábrica de hielo y depósito........................................................23

Canastilla removible del congelador..........................................24

CARACTERÍSTICAS DE LA PUERTA .........................................25

Recipientes de la puerta ............................................................25

CUIDADO DE SU REFRIGERADOR............................................25

Limpieza .....................................................................................25

Cómo cambiar los focos............................................................26

Cortes de corriente.....................................................................27

Cuidado durante las vacaciones y mudanzas...........................27

SOLUCIÓN DE PROBLEMAS......................................................28

AYUDA O SERVICIO TÉCNICO...................................................30

En los EE.UU..............................................................................30

En Canadá..................................................................................30

Piezas de repuesto.....................................................................30

HOJA DE DATOS DEL PRODUCTO ...........................................31

TABLE DES MATIÈRES

SÉCURITÉ DU RÉFRIGÉRATEUR ..............................................33

Mise au rebut de votre vieux réfrigérateur.................................33

AVANT L’UTILISATION................................................................34

UTILISATION DU RÉFRIGÉRATEUR..........................................34

Commutateur marche/arrêt .......................................................34

Sons normaux............................................................................35

Pour s’assurer d’une circulation d’air appropriée .....................35

Utilisation des commandes........................................................36

CARACTÉRISTIQUES DU RÉFRIGÉRATEUR ...........................37

Système de filtration d'eau........................................................37

Tablettes du réfrigérateur...........................................................37

Tiroir de spécialités alimentaires................................................38

Bac à légumes et couvercle.......................................................38

Casier utilitaire couvert...............................................................39

Casier à vin.................................................................................39

CARACTÉRISTIQUES DU CONGÉLATEUR...............................39

Machine à glaçons et bac d’entreposage .................................39

Panier du congélateur amovible ................................................40

CARACTÉRISTIQUES DE LA PORTE.........................................40

Compartiments dans la porte ....................................................40

ENTRETIEN DU RÉFRIGÉRATEUR ............................................41

Nettoyage...................................................................................41

Remplacement des ampoules d’éclairage ................................41

Pannes de courant.....................................................................42

Entretien avant les vacances ou lors d’un déménagement.......42

DÉPANNAGE.................................................................................43

ASSISTANCE OU SERVICE.........................................................45

Pièces de rechange....................................................................45

FEUILLES DE DONNÉES SUR LE PRODUIT.............................46

GARANTIE.....................................................................................47

REFRIGERATOR SAFETY

Proper Disposal of

Your Old Refrigerator

IMPORTANT: Child entrapment and suffocation are not problems

of the past. Junked or abandoned refrigerators are still dangerous

– even if they will sit for “just a few days.” If you are getting rid of

your old refrigerator, please follow these instructions to help

prevent accidents.

Before you throw away your old refrigerator or freezer:

■

Take off the doors.

■

Leave the shelves in place so that children may not easily

climb inside.

You can be killed or seriously injured if you don't

immediately follow instructions.

You

can be killed or seriously injured if you don't

follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you

what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all

safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or

“WARNING.” These words mean:

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic

precautions:

■ Plug into a grounded 3 prong outlet.

■ Do not remove ground prong.

■ Do not use an adapter.

■ Do not use an extension cord.

■ Disconnect power before servicing.

■ Replace all panels before operating.

■ Remove doors from your old refrigerator.

■ Use nonflammable cleaner.

■ Keep flammable materials and vapors, such as

gasoline, away from refrigerator.

■ Use two or more people to move and install

refrigerator.

■ Disconnect power before installing ice maker (on

ice maker kit ready models only).

■

Use a sturdy glass when dispensing ice or water

(on some models).

SAVE THESE INSTRUCTIONS

WARNING

Suffocation Hazard

Remove doors from your old refrigerator.

Failure to do so can result in death or

brain damage.

BEFORE USE

Removing packaging materials

■

Remove tape and glue residue from surfaces before turning

on the refrigerator. Rub a small amount of liquid dish soap

over the adhesive with your fingers. Wipe with warm water

and dry.

■

Do not use sharp instruments, rubbing alcohol, flammable

fluids, or abrasive cleaners to remove tape or glue. These

products can damage the surface of your refrigerator. For

more information, see the “Refrigerator Safety” section.

Cleaning before use

After you remove all of the packaging materials, clean the inside

of your refrigerator before using it. See the cleaning instructions

in the “Refrigerator Care” section.

REFRIGERATOR USE

Power On/Off Switch

If you need to turn the power to your refrigerator ON or OFF, you

must remove the top grille to gain access to the On/Off switch.

Turn the power to the refrigerator OFF when cleaning or changing

light bulbs.

Remove and replace top grille

Remove top grille:

1. Grasp both ends of the top grille.

2. Push the top grille straight up, then pull straight out. Lay the

top grille on a soft surface.

Important information to know about glass shelves

and covers:

Do not clean glass shelves or covers with warm water when

they are cold. Shelves and covers may break if exposed to

sudden temperature changes or impact, such as bumping.

For your protection, tempered glass is designed to shatter

into many small, pebble-size pieces. This is normal. Glass

shelves and covers are heavy. Use special care when re-

moving them to avoid impact from dropping.

1. Top grille

2. Cabinet side trims

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Failure to follow these instructions can result in

death, fire, or electrical shock.

Do not use an extension cord.

Do not use an adapter.

Do not remove ground prong.

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from refrigerator.

Failure to do so can result in death, explosion,

or fire.

2 21

Replace top grille:

1. Insert top grille hooks (located on the back of the top grille)

into the slots on the side trim.

2. Pull grille down slightly to lock into place.

Turn Power On or Off:

1. Remove top grille.

2. Press main power switch to the ON or OFF position.

3. Replace top grille.

IMPORTANT: Be sure the power switch is set to the ON position

after cleaning refrigerator or changing light bulbs.

Normal Sounds

Your new refrigerator may make sounds that your old one didn’t

make. Because the sounds are new to you, you might be

concerned about them. Most of the new sounds are normal. Hard

surfaces, such as the floor, walls, and cabinets, can make the

sounds seem louder. The following describes the kinds of sounds

and what may be making them.

■

If your product is equipped with an ice maker, you will hear a

buzzing sound when the water valve opens to fill the ice

maker for each cycle.

■

Your refrigerator is designed to run more efficiently to keep

your food items at the desired temperatures and to minimize

energy usage. The high efficiency compressor and fans may

cause your refrigerator to run longer than your old one. You

may also hear a pulsating or high-pitched sound from the

compressor or fans adjusting to optimize performance.

■

You may hear the evaporator fan motor circulating air through

the refrigerator and freezer compartments. The fan speed

may increase as you open the doors or add warm food.

■

Rattling noises may come from the flow of refrigerant, the

water line, or items stored on top of the refrigerator.

■

Water dripping on the defrost heater during a defrost cycle

may cause a sizzling sound.

■

As each cycle ends, you may hear a gurgling sound due to

the refrigerant flowing in your refrigerator.

■

Contraction and expansion of the inside walls may cause a

popping noise.

■

You may hear air being forced over the condenser by the

condenser fan.

■

You may hear water running into the drain pan during the

defrost cycle.

Ensuring Proper Air

Circulation

In order to ensure proper temperatures, you need to permit

airflow between the refrigerator and freezer sections. As shown in

the illustration, cool air enters the freezer section through vents in

the rear and top. The air flows forward through the freezer section

and recirculates under the freezer floor. Cool air enters the

refrigerator section through the top, flows down and across

shelves to the doors and recirculates to return air vents at the

bottom.

Do not block any of these vents with food packages. If the vents

are blocked, airflow will be prevented and temperature and

moisture problems may occur.

IMPORTANT: Because air circulates between both sections, any

odors formed in one section will transfer to the other. You must

thoroughly clean both sections to eliminate odors. To prevent

odor transfer and drying out of food, wrap or cover foods tightly.

Using the Controls

IMPORTANT:

■

The refrigerator control adjusts the refrigerator compartment

temperature. The freezer control adjusts the freezer

compartment temperature.

■

Wait 24 hours after you turn on the refrigerator before you put

food into it. If you add food before the refrigerator has cooled

completely, your food may spoil.

NOTE: Adjusting the refrigerator and freezer controls to a

lower (colder) setting will not cool the compartments any

faster.

■

If the temperature is too warm or too cold in the refrigerator or

freezer, first check the air vents to be sure they are not

blocked before adjusting the controls.

■

The preset settings should be correct for normal household

usage. The controls are set correctly when milk or juice is as

cold as you like and when ice cream is firm.

NOTE: The factory recommended set points are 0°F (-18°C) for

the freezer and 37°F (3°C) for the refrigerator.

1. Power On/Off switch

Turning Refrigerator On and Viewing Set Points

■

Press and hold POWER (ON/OFF) for 2 seconds.

Viewing the Celsius Temperatures

■

Press °C SELECT touch pad. The negative sign (-) will light

up. To redisplay degrees Fahrenheit, press °C SELECT again.

NOTE: If the freezer temperature is below zero, the negative sign

next to the freezer display will light up. This is normal.

Adjusting Controls

The set point range for the freezer is -5°F to 5°F (-21°C to

-13°C). The set point range for the refrigerator is 34°F to 46°F

(1°C to 8°C).

■

Press the refrigerator or freezer PLUS (+) or MINUS (-) key

pad until the desired temperature is reached.

NOTE: Wait at least 24 hours between adjustments. Recheck

the temperatures before other adjustments are made.

WATER FILTER Status & Reset

NOTE: Do not use with water that is microbiologically unsafe

or of unknown quality without adequate disinfection before

or after the system. Systems certified for cyst reduction may

be used on disinfected waters that may contain filterable

cysts.

The water filter display will help you know when it is time to

change your filter. To change the filter, see the “Water Filtration

System” section.

■

After replacing the water filter, press RESET and hold for

2 seconds to change the water filter display to 99 percent.

REFRIGERATOR

FEATURES

Water Filtration System

The Base Grille Water Filter Status Light

The water filter indicator display or light will help you know when

to change your water filter cartridge. The display or light is

located at the top of the refrigerator compartment.

NOTE: Do not use with water that is microbiologically unsafe

or of unknown quality without adequate disinfection before

or after the system. Systems certified for cyst reduction may

be used on disinfected waters that may contain filterable

cysts.

A new water filter should display a reading of 99% and will

continue to decrease as the filter life is used. When display reads

10%, it is time to order a replacement filter. It is recommended

that you replace the base grille water filter cartridge when the

water filter indicator light changes to 0% OR when water flow to

your water dispenser or ice maker decreases noticeably. (See

“Changing the Base Grille Filter” later in this section.)

After changing the water filter cartridge, reset the water filter

status light by pressing and holding the RESET for 2 seconds.

The indicator light will change to 99% when the filter indicator is

reset.

CONDITION/REASON: TEMPERATURE

ADJUSTMENT:

REFRIGERATOR too cold

Not set correctly for conditions

REFRIGERATOR Control 1°

higher

REFRIGERATOR too warm

High use or room very warm

REFRIGERATOR Control 1°

lower

FREEZER too cold

Not set correctly for conditions

FREEZER Control 1° higher

FREEZER too warm/too little

ice

High use or heavy ice use

FREEZER Control 1° lower

INDICATOR: STATUS:

99 percent New filter installed

10 percent Order replacement filter

0 percent or flow decreases Replace filter

Changing the Base Grille Filter

1. Locate the water filter cartridge cap in the front base grille.

Rotate the cap counterclockwise to a vertical position and

pull the cap and filter cartridge out through the base grille.

NOTE: There will be water in the cartridge. Some spilling may

occur.

2. Remove the cartridge cap by sliding it off the end of the old

cartridge. The cap will slide to the left or right. DO NOT

DISCARD THE CAP.

3. Take the new cartridge out of its packaging and remove

protective cover from o-rings.

4. Slide the cartridge cap onto the new cartridge. See

illustration in Step 2.

5. With cartridge cap in the vertical position, push the new filter

cartridge into the base grille until it stops. Rotate the cartridge

cap clockwise to a horizontal position. Discard the first three

batches of ice produced after replacing the filter.

Using the Ice Maker Without the Water Filter

You can run the ice maker without a water filter cartridge. Your ice

will not be filtered.

1. Remove the base grille water filter cartridge.

2. Slide the cartridge cap off the end of the filter cartridge. DO

NOT DISCARD THE CAP. With the cartridge cap in the

vertical position, insert the cap into the base grille until it

stops.

3. Rotate the cartridge cap to a horizontal position. The

cartridge cap might not be even with the base grille.

Refrigerator Shelves

The shelves in your refrigerator are adjustable to meet your

individual storage needs.

Storing similar food items together in your refrigerator and

adjusting the shelves to fit different heights of items will make

finding the exact item you want easier. It will also reduce the

amount of time the refrigerator door is open, and save energy.

Shelves

1. Remove the shelf by tilting it up at the front and lifting it out of

the shelf supports. Pull shelf straight out.

2. Reposition the shelf supports in the desired location. Check

that they are level and securely in position.

3. Place the back of the shelf in the shelf supports.

4. Lower the front of the shelf and check to make sure that it is

securely in position.

Important information to know about glass shelves

and covers:

Do not clean glass shelves or covers with warm water when

they are cold. Shelves and covers may break if exposed to

sudden temperature changes or impact, such as bumping.

For your protection, tempered glass is designed to shatter

into many small, pebble-size pieces. This is normal. Glass

shelves and covers are heavy. Use special care when re-

moving them to avoid impact from dropping.

Deli Pan

To remove and replace the deli pan:

1. Slide the deli pan straight out to the stop. Lift the front of the

pan with one hand while supporting the bottom of the pan

with the other hand. Slide the deli pan out the rest of the way.

2. To replace the deli pan, place it onto slides and push back

until it is securely in position.

Meat Storage Guide

Store most meat in original wrapping as long as it is airtight and

moisture-proof. Rewrap if necessary. See the following chart for

storage times. When storing meat longer than the times given,

freeze the meat.

Fresh fish or shellfish ........................ use same day as purchased

Chicken, ground beef, variety meat (liver, etc.)................ 1-2 days

Cold cuts, steaks/roasts.................................................. 3-5 days

Cured meats .................................................................. 7-10 days

Leftovers - Cover leftovers with plastic wrap, aluminum foil, or

plastic containers with tight lids.

Crisper Drawer and Cover

Remove and replace the crisper drawer:

1. Remove contents from the crisper drawer.

2. Slide the crisper drawer straight out to the stop.

3. Lift the front of the crisper drawer with one hand while

supporting the bottom of the crisper drawer with the other

hand. Slide the crisper drawer out the rest of the way.

4. To replace the crisper drawer, place it onto the slides and

push it back until it is securely in position.

Remove and replace the crisper cover:

1. Remove food from crisper cover. Pull crisper drawer out

about 4 in. (10.16 cm). Reach under the glass shelf with both

hands and lift gently upward until back of shelf is free. Tilt

shelf at an angle and remove shelf from refrigerator being

careful not to bump the glass.

2. Replace the crisper cover by holding the glass shelf firmly

with both hands, tilt the shelf at an angle and position it

above the support rails. Place shelf gently on support rails on

side wall.

Covered Utility Bin

NOTE: For long-term storage, store eggs in a covered container

or in their original carton on an interior shelf.

Wine Rack

To remove and replace the wine rack:

1. Remove the rack by pulling it straight out from the shelf.

2. Replace the rack by sliding it in between the shelf and the

wall of the refrigerator.

FREEZER FEATURES

Ice Maker and Storage Bin

Turn the ice maker on/off:

The on/off switch for the ice maker is a wire shutoff arm located

on the side of the ice maker.

1. To turn the ice maker on, simply lower the wire shutoff arm.

NOTE: Your ice maker has an automatic shutoff. As ice is

made, the ice cubes will fill the ice storage bin and the ice

cubes will raise the wire shutoff arm to the OFF (arm up)

position.

2. To manually turn the ice maker off, lift the wire shutoff arm to

the OFF (arm up) position and listen for the click to make sure

the ice maker will not continue to operate.

Increase ice production rate:

■

In normal ice production, the ice maker should produce

approximately 7 to 9 batches of ice in a 24-hour period. If ice

is not being made fast enough, turn the Freezer Control

toward a higher (colder) number. Wait 24 hours between each

increase.

Care for ice storage bin:

1. Empty the ice bin. Use warm water to melt the ice if

necessary.

NOTE: Never use anything sharp to break up the ice in the

bin. This can cause damage to the ice container and the

dispenser mechanism.

2. Wash ice bin with a mild detergent, rinse well and dry

thoroughly. Do not use harsh or abrasive cleaners or solvents.

REMEMBER:

■

Allow 24 hours to produce the first batch of ice.

■

Discard the first three batches of ice produced to avoid

impurities that may be flushed out of the system.

■

The quality of your ice will be only as good as the quality of

the water supplied to your ice maker.

■

Avoid connecting the ice maker to a softened water supply.

Water softener chemicals (such as salt) can damage parts of

the ice maker and lead to poor quality ice. If a softened water

supply cannot be avoided, make sure the water softener is

operating properly and is well maintained.

■

It is normal for the ice cubes to be attached at the corners.

They will break apart easily.

■

Do not force the wire shutoff arm up or down.

■

Do not store anything on top of the ice maker or in the ice

storage bin.

■

It may take three to four days for the ice bin to completely fill,

if no ice is used.

Pull-out Freezer Basket

The freezer basket can be used to store bags of frozen fruits and

vegetables that may slide off freezer shelves.

Remove and replace the freezer basket:

1. Turn off the ice maker. Pull basket out of freezer.

2. Lift basket up and out.

3. Replace the basket by placing rear of basket in shelf tracks.

Lower front of basket.

4. Turn on ice maker.

Frozen Food Storage Guide

Storage times will vary according to the quality and type of food,

the type of packaging or wrap used (should be airtight and

moisture-proof), and the storage temperature. Ice crystals inside

a sealed package are normal. This simply means that moisture in

the food and air inside the package have condensed, creating ice

crystals.

Put no more unfrozen food into the freezer than will freeze within

24 hours (no more than 2 to 3 lbs. of food per cubic foot

[907-1,350 g per L] of freezer space). Leave enough space in the

freezer for air to circulate around packages. Be careful to leave

enough room for the door to close tightly.

For more information on preparing food for freezing, check a

freezer guide or reliable cookbook.

DOOR FEATURES

Door Bins

The top two door bins hold 2-liter bottles and are adjustable. The

bottom door bin is fixed and can hold gallon containers.

Gallon Door Bin

NOTE: Do not place an interior shelf directly across from the

gallon door bin, as shown following. The gallon door bin or its

contents will prevent the refrigerator door from closing and could

cause damage to bins and shelves.

Door Bins

1. Remove the bin by lifting it up and pulling it straight out.

2. Replace the bin by insert the hooks into the slots on both

sides of the refrigerator door. Push the bin down to lock it into

place.

REFRIGERATOR

CARE

Cleaning

Both the refrigerator and freezer sections defrost automatically.

However, clean both sections about once a month to prevent

odors from building up. Wipe up spills immediately.

To clean your refrigerator:

1. Remove the top grille. See “Power On/Off Switch.”

2. Press power switch to OFF.

3. Remove all removable parts from inside, such as shelves,

crispers, etc.

4. Hand wash, rinse, and dry removable parts and interior

surfaces thoroughly. Use a clean sponge or soft cloth and a

mild detergent in warm water.

■

Do not use abrasive or harsh cleaners such as window

sprays, scouring cleansers, flammable fluids, cleaning

waxes, concentrated detergents, bleaches or cleansers

containing petroleum products on plastic parts, interior

and door liners or gaskets. Do not use paper towels,

scouring pads, or other harsh cleaning tools. These can

scratch or damage materials.

■

To help remove odors, you can wash interior walls with a

mixture of warm water and baking soda (2 tbs. to 1 qt.

[26 g to .95 L] of water).

5. Wash stainless steel and painted metal exteriors with a clean

sponge or soft cloth and a mild detergent in warm water. Do

not use abrasive or harsh cleaners. Dry thoroughly with a soft

cloth. For additional protection against damage to painted

metal exteriors, apply appliance wax (or auto paste wax) with

a clean, soft cloth. Do not wax plastic parts.

6. Clean the condenser coils located behind the top grille

ventilation panel regularly. Coils may need to be cleaned as

often as every other month. This may help save energy.

■

Use a vacuum cleaner with an extended attachment to

clean the condenser coils when they are dusty or dirty.

7. Clean defrost pan using mild detergent in warm water. Dry

thoroughly.

■

Remove the base grille by removing a screw at each end.

■

Remove the defrost pan by pushing up on the retaining

clip under the refrigerator while sliding the pan forward.

■

Replace the defrost pan by positioning the edge of the

defrost pan approximately 7 in. (17.8 cm) from the left

side of the refrigerator. Lift defrost pan into guides, and

push back. Place pan inside of retaining clip. Replace the

base grille and base grille screws.

8. Press the power switch to the ON position.

9. Replace the top grille. See “Power On/Off Switch.”

Changing the Light Bulbs

NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to

replace the bulb with one of the same size and shape. The lights

require a 40-watt to 60-watt maximum appliance bulb.

Replacement bulbs are available from your dealer.

1. Remove the top grille. See “Power On/Off Switch.”

2. Press power switch to the OFF position.

3. Remove light shield when applicable.

NOTE: To clean a light shield, wash it with warm water and a

liquid detergent. Rinse and dry the shield well.

4. Remove light bulb and replace with one of the same size,

shape and wattage.

5. Replace light shield when applicable.

6. Press the power switch to the ON position.

7. Replace the top grille. See the “Power On/Off Switch”

section.

Refrigerator Control Panel Lights

Reach behind the refrigerator and freezer control panel (located

at the top of the refrigerator compartment) to remove and replace

the light bulb.

Freezer Light (Above Ice Storage Bin)

Reach behind the panel (located at the top of the freezer

compartment) to remove and replace the light bulb.

Power Interruptions

If the power will be out for 24 hours or less, keep the door or

doors closed (depending on your model) to help food stay cold

and frozen.

If the power will be out for more than 24 hours, do one of the

following:

■

Remove all frozen food and store it in a frozen food locker.

■

Place 2 lbs (907 g) of dry ice in the freezer for every cubic foot

(28 L) of freezer space. This will keep the food frozen for 2 to

4 days.

■

If neither a food locker nor dry ice is available, consume or

can perishable food at once.

REMEMBER: A full freezer stays cold longer than a partially filled

one. A freezer full of meat stays cold longer than a freezer full of

baked goods. If you see that food contains ice crystals, it may be

refrozen, although the quality and flavor may be affected. If the

condition of the food is poor, dispose of it.

Vacation and Moving Care

Vacations

If you choose to leave the refrigerator on while you’re

away:

1. Use up any perishables and freeze other items.

2. If your refrigerator has an automatic ice maker:

■

Raise wire shutoff arm to OFF (up) position or move the

switch to the OFF (right) setting.

■

Shut off water supply to the ice maker.

3. Empty the ice bin.

If you choose to turn the refrigerator off before you leave:

1. Remove all food from the refrigerator.

2. If your refrigerator has an automatic ice maker:

■

Turn off the water supply to the ice maker at least one day

ahead of time.

■

When the last load of ice drops, raise the wire shutoff arm

to the OFF (up) position or move the switch to the OFF

(right) setting.

3. Depending on the model, turn the Thermostat Control or

Refrigerator Control to OFF. See the “Using the Control(s)”

section.

4. Clean refrigerator, wipe it, and dry well.

5. Tape rubber or wood blocks to the tops of both doors to prop

them open far enough for air to get in. This stops odor and

mold from building up.

1. Defrost pan

2. Retaining clip

Moving

When you are moving your refrigerator to a new home, follow

these steps to prepare it for the move.

1. If your refrigerator has an automatic ice maker:

■

Turn off the water supply to the ice maker at least one day

ahead of time.

■

Disconnect the water line from the back of the

refrigerator.

■

When the last load of ice drops, raise the wire shutoff arm

to the OFF (up) position or move the switch to the OFF

(right) setting.

2. Remove all food from the refrigerator and pack all frozen food

in dry ice.

3. Empty the ice bin.

4. Depending on the model, turn the Thermostat Control or

Refrigerator Control to OFF. See the “Using the Control(s)”

section.

5. Unplug refrigerator.

6. Empty water from the defrost pan.

7. Clean, wipe, and dry thoroughly.

8. Take out all removable parts, wrap them well, and tape them

together so they don’t shift and rattle during the move.

9. Depending on the model, raise the front of the refrigerator so

it rolls more easily OR screw in the leveling legs so they don't

scrape the floor. See the “Level Refrigerator” section in the

Installation Instructions.

10. Tape the doors closed and tape the power cord to the

refrigerator cabinet.

When you get to your new home, put everything back and refer to

the Installation Instructions for preparation instructions. Also, if

your refrigerator has an automatic ice maker, remember to

reconnect the water supply to the refrigerator.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the

cost of an unnecessary service call.

Your refrigerator will not operate

■

Is the power supply cord unplugged? Plug into a grounded

3 prong outlet.

■

Has a household fuse blown or circuit breaker tripped?

Replace the fuse or reset the circuit breaker.

■

Is the refrigerator or freezer control turned to the OFF

position? See the “Using the Control(s)” section.

■

Is the refrigerator defrosting? Recheck to see if the

refrigerator is operating in 30 minutes. Your refrigerator will

regularly run an automatic defrost cycle.

■

Is the refrigerator not cooling? For models with digital

controls, turn the unit OFF then ON again to reset. See the

“Using the Control(s)” section. If this does not correct the

problem, call for service.

The lights do not work

■

Is the power supply cord unplugged? Plug into a grounded

3 prong outlet.

■

Is a light bulb loose in the socket or burned out? See the

“Changing the Light Bulb(s)” section.

There is water in the defrost drain pan

■

Is the refrigerator defrosting? The water will evaporate. It is

normal for water to drip into the defrost pan.

■

Is it more humid than normal? When it is humid, expect that

the water in the defrost pan will take longer to evaporate.

The motor seems to run too much

■

Is the room temperature hotter than normal? The motor

will run longer under warm conditions. At normal room

temperatures, expect your motor to run about 80% of the

time. Under warmer conditions, it will run even more.

■

Has a large amount of food just been added to the

refrigerator? Adding a large amount of food warms the

refrigerator. The motor normally will run longer to cool the

refrigerator back down.

■

Are the doors opened often? The motor will run longer

when this occurs. Conserve energy by getting all items out at

one time, keeping food organized, and closing the door as

soon as possible.

■

Are the controls not set correctly for the surrounding

conditions? Refer to the “Using the Control(s)” section.

■

Are the doors not closed completely? Close the doors

firmly. If they do not close completely, see “The doors will not

close completely” later in this section.

■

Are the condenser coils dirty? This prevents air transfer and

makes the motor work harder. Clean the condenser coils.

Refer to the “Cleaning” section.

■

Are the door gaskets not sealed all the way around?

Contact a technician or other qualified person.

NOTE: Your new refrigerator will run longer than your old one

due to its high-efficiency motor.

The refrigerator seems to make too much noise

■

The sounds may be normal for your refrigerator. See the

“Normal Sounds” section.

The ice maker is not producing ice or not enough ice

■

Has the ice maker just been installed? The ice bin holds 14

to 17 lbs. (6.4 to 7.7 kg) of ice. The ice bin can take three to

four days to completely fill, if no ice is used during this time.

■

Is the freezer temperature cold enough to produce ice?

Wait 24 hours after ice maker hookup for ice production. See

the “Using the Control(s)” section.

■

Is the ice maker wire shutoff arm in the OFF (wire shutoff

arm up) position (on some models)? Lower wire shutoff arm

to the ON (wire shutoff arm down) position. See the “Ice

Maker and Storage Bin” section.

■

Is the water line shutoff valve to the refrigerator not

turned on? Turn on the water valve. See the “Connect Water

Line to Refrigerator” section in the Installation Instructions.

■

Is an ice cube jammed in the ice maker ejector arm?

Remove the ice from the ejector arm with a plastic utensil.

See the “Ice Maker and Storage Bin” section.

■

Does the ice maker mold have water in it or has no ice

been produced? Make sure your refrigerator has been

connected to a water supply and the supply shutoff valve is

turned on. See the “Connect Water Line to Refrigerator”

section in the Installation Instructions.

■

Has a large amount of ice just been removed? Allow three

to four days for an empty ice bin to completely fill, if no ice is

used during this time.

■

Are the controls set correctly? See the “Using the

Control(s)” section.

NOTE: If not due to any of the above, there may be a problem

with the water line. Call for service.

Off-taste, odor or gray color in the ice

■

Are the plumbing connections new, causing discolored or

off-flavored ice? Discard the first few batches of ice.

■

Have the ice cubes been stored too long? Throw old ice

away and make a new supply.

■

Does the freezer and ice bin need to be cleaned? See the

“Cleaning” or “Ice Maker and Storage Bin” section.

■

Has food in the freezer or refrigerator been wrapped

properly? Use airtight, moisture-proof packaging to help

prevent odor transfer to stored food.

■

Does the water contain minerals (such as sulfur)? A filter

may need to be installed to remove the minerals.

The divider between the two compartments is warm

The warmth is probably due to normal operation of the

automatic exterior moisture control. If still concerned, call for

service.

Temperature is too warm

■

Are the air vents blocked in either compartment? This

prevents the movement of cold air from the freezer to the

refrigerator. Remove any objects from in front of the air vents.

See the “Ensuring Proper Air Circulation” section for the

location of air vents.

■

Are the door(s) opened often? The refrigerator will warm

when this occurs. Keep the refrigerator cool by getting all

items out at one time, keeping food organized, and closing

the door as soon as possible.

■

Has a large amount of food just been added to the

refrigerator or freezer? Adding a large amount of food

warms the refrigerator. It can take several hours for the

refrigerator to return to the normal temperature.

■

Are the controls set correctly for the surrounding

conditions? See the “Using the Control(s)” section.

■

Is the refrigerator not cooling? For models with digital

controls, turn the unit OFF then ON again to reset. See the

“Using the Control(s)” section. If this does not correct the

problem, call for service.

There is interior moisture buildup

■

Are the air vents blocked in the refrigerator? Remove any

objects from in front of the air vents. See the “Ensuring

Proper Air Circulation” section for the location of air vents.

■

Are the door(s) opened often? Avoid humidity buildup by

getting all items out at one time, keeping food organized, and

closing the door as soon as possible.

■

Is the room humid? It is normal for moisture to build up

inside the refrigerator when the room air is humid.

■

Is the food packaged correctly? Check that all food is

securely wrapped. Wipe off damp food containers before

placing in the refrigerator.

■

Are the controls set correctly for the surrounding

conditions? See the “Using the Control(s)” section.

■

Was a self-defrost cycle completed? It is normal for

droplets to form after the refrigerator self-defrosts.

The doors will not close completely

■

Are food packages blocking the door open? Rearrange

containers so that they fit more tightly and take up less

space.

■

Is the ice bin out of position? Push the ice bin in all the way.

If the ice bin does not go in all the way, it may not be put in

straight. Pull it out and try again. See the “Ice Maker and

Storage Bin” section.

■

Are the pans, shelves, bins, or baskets out of position?

Put the crisper cover and all pans, shelves, bins, and baskets

back into their correct positions. See the “Crisper Drawer and

Cover” section for more information.

■

Are the gaskets sticking? Clean gaskets according to the

directions in the “Cleaning” section.

■

Does the refrigerator wobble or seem unstable? Level the

refrigerator. See the “Level Refrigerator” sections in the

Installation Instructions.

The doors are difficult to open

■

Are the gaskets dirty or sticky? Clean gaskets according to

the directions in the “Cleaning” section.

ASSISTANCE

OR SERVICE

Before calling for assistance or service, please check

“Troubleshooting.” It may save you the cost of a service call. If

you still need help, follow the instructions below.

When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will

help us to better respond to your request.

If you need replacement parts

If you need to order replacement parts, we recommend that you

only use factory specified replacement parts. Factory specified

replacement parts will fit right and work right because they are

made with the same precision used to build every new

THERMADOR

appliance.

To locate factory specified replacement parts in your area, call

1-800-735-4328.

In the U.S.A.

Call the Thermador Customer Interaction Center toll free:

1-800-735-4328.

Our consultants provide assistance with:

■

Features and specifications on our full line of appliances.

■

Referrals to local dealers.

For further assistance

If you need further assistance, you can write to Thermador with

any questions or concerns at:

Thermador

5551 McFadden Ave.

Huntington Beach, CA 92694

Please include a daytime phone number in your correspondence.

In Canada

Call the Thermador Customer Interaction Center toll free:

1-800-735-4328 Monday to Friday 5:00 a.m. - 6:00 p.m. (PST).

Saturday 8:30 a.m. - 4:30 p.m. (PST).

Our consultants provide assistance with:

■

Features and specifications on our full line of appliances.

■

Referrals to local dealers.

For service in Canada

Call 1-800-735-4328. Thermador Canada designated service

technicians are trained to fulfill the product warranty and provide

after-warranty service, anywhere in Canada.

For further assistance

If you need further assistance, you can write to Thermador

Canada with any questions or concerns at:

Thermador

5551 McFadden Ave.

Huntington Beach, CA 92694

Please include a daytime phone number in your correspondence.

Replacement Parts

To order replacement parts, call 1-800-735-4328 for the

authorized parts distributor in your area. In Canada, call

1-800-735-4328.

Base grille water filter cartridges:

NOTE: Do not use with water that is microbiologically unsafe

or of unknown quality without adequate disinfection before

or after the system. Systems certified for cyst reduction may

be used on disinfected waters that may contain filterable

cysts.

Standard Cartridge:

Order Part: WAFILTER (LC400V)

WATER FILTER

CERTIFICATIONS

PRODUCT DATA SHEETS

Base Grille Water Filtration System

Model WF-LC400V/LC400V Capacity 400 Gallons (1514 Liters)

This system has been tested according to ANSI/NSF 42/53 for the reduction of the substances listed below. The concentration of

the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for

water leaving the system, as specified in ANSI/NSF 42/53.

Test Parameters: pH = 7.5 ± 0.5 unless otherwise noted. Flow = 0.5 gpm (1.9 Lpm). Pressure = 60 psig (413.7 kPa). Temp. = 63°F

(17.2°C).

■

It is essential that operational, maintenance, and filter

replacement requirements be carried out for the product to

perform as advertised.

■

Model WF-LC400V The filter monitor system measures the

amount of water that passes through the filter and alerts you

to replace the filter. When 90% of the filter’s rated life is used,

the filter indicator light changes from green to yellow. When

100% of the filter’s rated life is used, the filter indicator light

changes from yellow to red, and it is recommended that you

replace the filter. Use replacement cartridge LC400V, part:

WAFILTER. 2003 suggested retail price of $39.99 U.S.A./

$59.95 Canada. Prices are subject to change without notice.

■

The product is for cold water use only.

■

Do not use with water that is microbiologically unsafe or of

unknown quality without adequate disinfection before or after

the system. Systems certified for cyst reduction may be used

on disinfected waters that may contain filterable cysts.

■

Refer to the front cover or “Accessories” section for the

Manufacturer’s name, address and telephone number.

■

Refer to the “Warranty” section for the Manufacturer’s limited

warranty.

Application Guidelines/Water Supply Parameters

Substance Reduction

Aesthetic Effects

NSF

Reduction

Requirements

Average

Influent

Influent Challenge

Concentration

Maximum

Effluent

Average

Effluent

Minimum %

Reduction

Average %

Reduction

NSF Test

Number

Chlorine Taste/Odor

Particulate Class 1

≥50%

≥85%

2.1 mg/L

5,366,667/mL

2.0 mg/L ± 10%

At least 10,000

particles/mL

0.06 mg/L

4,100/mL**

0.05 mg/L

2,300/mL

97.1%

99.3%

97.6%

99.9%

507173-02

507175-02

Contaminant

Reduction

NSF

Reduction

Requirements

Average

Influent

Influent Challenge

Concentration

Maximum

Effluent

Average

Effluent

Minimum %

Reduction

Average %

Reduction

NSF Test

Number

Lead: @ pH 6.5

Lead: @ pH 8.5

0.01mg/L

0.16 mg/L***

0.15 mg/L***

0.15 mg/L ± 10%

0.001 mg/L

99.3%

99.2%

99.35%

99.31%

507601-01

507602-01

Mercury: @ pH 6.5

Mercury: @ pH 8.5

0.002 mg/L

0.0061 mg/L

0.0057 mg/L

0.006 mg/L ± 10%

0.0004 mg/L

0.0008 mg/L

0.0003 mg/L

0.00051 mg/L

93.5%

85.8%

96.7%

91.2%

507603-02

507604-02

Benzene 0.005 mg/L 0.0138 mg/L 0.015 ± 10% 0.0005 mg/L 0.005 mg/L 96.3% 96.3% 507183-02

p-dichlorobenzene 0.075 mg/L 0.220 mg/L 0.225 ± 10% 0.0005 mg/L 0.0005 mg/L 99.7% 99.7% 507186-02

Toxaphene 0.003 mg/L 0.014 mg/L 0.015 ± 10% 0.0014 mg/L 0.001 mg/L 90% 92.96% 507185-02

Atrazine 0.003 mg/L 0.009 mg/L 0.009 mg/L ± 10% 0.0013 mg/L 0.00036 mg/L 85.6% 85.6% 507181-02

2, 4-D 0.07 mg/L 0.197 mg/L 0.215 ± 10% 0.058 mg/L 0.0137 mg/L 70.6% 93.06% 507180-02

Asbestos 99% 26 x 10

to 10

fibers/L**** 0.18 x 10

mg/L 0.18 x 10

mg/L 99.93 99.93% 507178-02

Cysts*****

Turbidity

99.95%

0.5 NTU

111,000/mL

11.08 NTU

50,000/L min.

11 ± 1 NTU

1 mg/L

0.13 NTU

1 mg/L

0.078 NTU

99.99%

98.8%

99.99%

99.3%

507187-02

507751-02

Tested and certified by NSF International against ANSI/NSF Standard

42 for the reduction of Chlorine, Taste and Odor, Particulate Class I*;

and against ANSI/NSF Standard 53 for the reduction of Lead,

Mercury, Atrazine, Benzene, Toxaphene, p-dichlorobenzene, 2, 4-D,

Cysts, Turbidity and Asbestos.

Water Supply

Water Pressure

Water Temperature

Service Flow Rate

City or Well

30 - 120 psi (207 - 827 kPa)

33° - 100°F (0.6° - 37.8° C)

0.5 GPM (1.89 L/min.) @ 60 psi.

***

****

*****

Class I particle size: >0.5 to <1 um

Test requirement is at least 100,000 particles/mL of AC Fine Test Dust.

These contaminants are not necessarily in your water supply. Performance may vary based on local water conditions.

Fibers greater than 10 um in length

Based on the use of Cryptosporidium parvum oocysts

® NSF is a registered trademark of NSF International.

THERMADOR

BUILT-IN REFRIGERATOR

WARRANTY

TWO-YEAR FULL WARRANTY

For two years from the date of purchase, when this refrigerator (excluding the water filter cartridges) is operated and maintained

according to instructions attached to or furnished with the product, Thermador will pay for factory specified replacement parts and

repair labor costs to correct defects in materials or workmanship. Service must be provided by a Thermador designated service

company.

Water filter cartridge: 30 day limited warranty on water filter. For 30 days from the date of purchase, when this filter is operated and

maintained according to instructions attached to or furnished with the product, Thermador will pay for replacement parts to correct

defects in materials and workmanship.

THIRD THROUGH SIXTH YEAR FULL WARRANTY ON SEALED REFRIGERATION SYSTEM PARTS AS LISTED

In the third through sixth years from the date of purchase, when this refrigerator is operated and maintained according to instructions

attached to or furnished with the product, Thermador will pay for factory specified replacement parts and repair labor costs to correct

defects in materials or workmanship in the sealed refrigeration system. These parts are: compressor, evaporator, condenser, dryer, and

connecting tubing. Service must be performed by a Thermador designated service company.

SEVENTH THROUGH TWELFTH YEAR LIMITED WARRANTY ON SEALED REFRIGERATION SYSTEM

In the seventh through twelfth years from date of purchase, when this refrigerator is operated and maintained according to instructions

attached to or furnished with the product, Thermador will pay for factory specified replacement parts to correct defects in materials or

workmanship in the sealed refrigeration system. These parts are: compressor, evaporator, condenser, dryer, and connecting tubing.

Thermador will not pay for:

1. Service calls to correct the installation of your refrigerator, to instruct you how to use your refrigerator, to replace house fuses or

correct house wiring or plumbing, to replace light bulbs, or to replace water filters other than as noted above.

2. Repairs when your refrigerator is used in other than normal, single-family household use.

3. Pickup and delivery. Your refrigerator is designed to be repaired in the home.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, improper installation, acts of God, or use of products not

approved by Thermador or Thermador Canada.

5. Any food or medicine loss due to product failure.

6. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

7. Removal and replacement of trim or decorative panels that interfere with servicing the product.

8. Labor or parts installed by any non-designated service company during the full warranty period, unless approved by Thermador

before service is performed.

9. In Canada, travel or transportation expenses for customers who reside in remote areas.

10. Any labor costs during the limited warranty periods.

THERMADOR AND THERMADOR CANADA SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or limitation

may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or

province to province.

Outside the 50 United States and Canada, a different warranty may apply. Contact your authorized Thermador dealer to

determine if another warranty applies.

If you need service, first see the “Troubleshooting” section of this book. After checking “Troubleshooting,” additional help can be found

by checking the “Assistance or Service” section or by calling the Thermador Customer Interaction Center, 1-800-735-4328 (toll-free),

from anywhere in the U.S.A. In Canada, contact your designated Thermador Canada service company or

call 1-800-735-4328.

5/03

Keep this book and your sales slip together for future

reference. You must provide proof of purchase or installation

date for in-warranty service.

Write down the following information about your refrigerator to

better help you obtain assistance or service if you ever need it.

You will need to know your complete model number and serial

number. You can find this information on the model and serial

number label located on the inside wall of the refrigerator

compartment.

Dealer name____________________________________________________

Address ________________________________________________________

Phone number__________________________________________________

Model number __________________________________________________

Serial number __________________________________________________

Purchase date __________________________________________________

SEGURIDAD DEL REFRIGERADOR

Cómo deshacerse de

su refrigerador viejo

IMPORTANTE: El atrapamiento y asfixia de niños no es un

problema del pasado. Los refrigeradores tirados y abandonados

son un peligro...aún si van a quedar ahí “por unos pocos días”. Si

Ud. está por deshacerse de su refrigerador viejo, por favor siga

las instrucciones que se dan a continuación para prevenir

accidentes.

Antes de tirar su refrigerador viejo o congelador:

■

Saque las puertas.

■

Deje los estantes en su lugar así los niños no pueden meterse

adentro con facilidad.

Si no sigue las instrucciones de inmediato,

usted

o sufrir una lesión grave.

Si no sigue las instrucciones,

usted puede morir

o sufrir una lesión grave.

Todos los mensajes de seguridad le dirán el peligro potencial, le dirán cómo reducir las posibilidades de sufrir

una lesión y lo que puede suceder si no se siguen las instrucciones.

Su seguridad y la seguridad de los demás es muy importante.

Hemos incluido muchos mensajes importantes de seguridad en este manual y en su electrodoméstico.

Este es el símbolo de advertencia de seguridad.

Este símbolo le llama la atención sobre peligros potenciales que pueden ocasionar la muerte o una

y de la palabra “PELIGRO” o “ADVERTENCIA”. Estas palabras significan:

PELIGRO

ANTES DE USAR

Cómo quitar los materiales de empaque

■

Quite los residuos de la cinta y goma de las superficies de su

refrigerador antes de ponerlo en marcha. Frote un poco de

detergente líquido sobre el adhesivo con los dedos. Limpie

con agua tibia y seque.

■

No use instrumentos filosos, alcohol para fricciones, líquidos

inflamables o limpiadores abrasivos para eliminar restos de

cinta o goma. Estos productos pueden dañar la superficie de

su refrigerador. Para más información, vea la sección

“Seguridad del refrigerador”.

Cómo limpiar su refrigerador antes de usarlo

Una vez que usted haya quitado todos los materiales de

empaque, limpie el interior de su refrigerador antes de usarlo.

Vea las instrucciones de limpieza en la sección “Cuidado de su

refrigerador”.

USO DE SU

REFRIGERADOR

Interruptor de Encendido/

Apagado

Si necesita encender (ON) o apagar (OFF) su refrigerador, deberá

quitar la rejilla superior para poder alcanzar el interruptor de

Encendido/Apagado. Cuando limpie el refrigerador o cambie los

focos, póngalo en OFF (Apagado).

Quite y vuelva a colocar la rejilla superior

Para quitar la rejilla superior:

1. Tome ambos extremos de la rejilla superior.

Información importante para saber acerca de los estantes

y tapas de vidrio:

No limpie los estantes y tapas de vidrio con agua caliente

mientras están fríos. Los estantes y tapas pueden romperse

si se exponen a cambios bruscos de temperatura o impacto,

como sería un golpe brusco. Para su protección, el vidrio

templado se ha diseñado para hacerse añicos. Esto es nor-

mal. Los estantes y tapas de vidrio son muy pesados. Tenga

mucho cuidado al sacarlos para evitar que se dañen al caer.

ADVERTENCIA

Peligro de Choque Eléctrico

Conecte a un contacto de pared de conexión a

tierra de 3 terminales.

No quite el terminal de conexión a tierra.

No use un adaptador.

No use un cable eléctrico de extensión.

No seguir estas instrucciones puede ocasionar

la muerte, incendio o choque eléctrico.

ADVERTENCIA

Peligro de Explosión

Mantenga los materiales y vapores inflamables,

tales como gasolina, alejados del refrigerador.

No seguir esta instrucción puede ocasionar

la muerte, explosión, o incendio.

2. Empuje la rejilla superior hacia arriba y luego jale

directamente hacia afuera. Coloque la rejilla sobre una

superficie blanda.

Para volver a colocar la rejilla superior:

1. Inserte los ganchos de la rejilla superior (ubicados en la parte

trasera de la rejilla superior) en las ranuras que están en el

adorno lateral.

2. Empuje la rejilla ligeramente hacia abajo para que encaje en

su lugar.

Para encender o apagar:

1. Quite la rejilla superior.

2. Presione el interruptor principal de suministro a la posición

ON o OFF (Encendido o Apagado).

3. Vuelva a colocar la rejilla superior.

IMPORTANTE: Cerciórese de que el interruptor de suministro

esté en la posición ON después de limpiar el refrigerador o de

cambiar los focos.

Sonidos normales

Su nuevo refrigerador puede hacer ruidos que su viejo

refrigerador no hacía. Como estos sonidos son nuevos para Ud.,

puede ser que se preocupe. La mayoría de los sonidos nuevos

son normales. Superficies duras, como el piso, las paredes y los

gabinetes, pueden hacer que los sonidos parezcan más fuertes

de lo que son en realidad. A continuación se describen los tipos

de sonidos y qué puede causarlos.

■

Si su producto está equipado con una fábrica de hielo, Ud.

escuchará un zumbido cuando la válvula de agua se abre

para llenar la fábrica de hielo en cada ciclo.

■

Su refrigerador está diseñado para funcionar con más

eficiencia para conservar sus alimentos a la temperatura

deseada y para minimizar el uso de energía. El compresor de

alta eficiencia y los ventiladores pueden causar que su nuevo

refrigerador funcione por períodos de tiempo más largos que

su refrigerador viejo y Ud. puede escuchar un sonido

pulsante o agudo que proviene del compresor o de los

ventiladores que se ajustan para un rendimiento óptimo.

■

Puede ser que Ud. escuche el motor del ventilador del

evaporador circulando el aire a través de los compartimientos

del refrigerador y del congelador. Es posible que aumente la

velocidad del ventilador cuando usted abra la puerta o

agregue alimentos calientes.

■

Las vibraciones pueden producirse por el flujo de líquido

refrigerante, tubería de agua o artículos guardados arriba del

refrigerador.

■

El agua que gotea en el calentador del descongelador

durante el ciclo de descongelación puede causar

chisporroteos.

■

Al final de cada ciclo, Ud. puede escuchar un gorgoteo

debido al flujo de líquido refrigerante en su refrigerador.

■

La contracción y expansión de las paredes internas pueden

causar un ligero estallido.

■

Ud. puede escuchar aire forzado por el ventilador del

condensador sobre el condensador.

■

Ud. puede escuchar agua corriendo hacia la bandeja

recolectora durante el ciclo de descongelación.

Cómo asegurar la debida

circulación del aire

Para asegurar la temperatura correcta, debe permitir que el aire

fluya entre las secciones del refrigerador y del congelador. Como

se indica en la ilustración, el aire frío entra en la sección del

congelador por orificios de ventilación en la parte trasera y

superior. El aire fluye por la sección del congelador y circula de

nuevo por debajo del piso del congelador. El aire frío entra en la

sección del refrigerador por la parte superior, luego fluye hacia

abajo y a través de los estantes hasta las puertas, y circula de

nuevo a los orificios de ventilación de regreso en la parte

superior.

No bloquee ninguno de estos orificios de ventilación con

paquetes de alimentos. Si estos orificios están bloqueados, el

aire no circulará y podrían ocasionarse problemas de

temperatura y humedad.

IMPORTANTE: Debido a que el aire circula entre ambas

secciones, los olores que se formen en una sección pasarán a la

otra. Para eliminar los olores, limpie completamente ambas

secciones. Para evitar que los olores pasen de una sección a otra

o que los alimentos se sequen, envuelva o cubra bien los

alimentos.

1. Rejilla superior

2. Adornos laterales del gabinete

1. Interruptor de Encendido/Apagado

2 21

Uso de los controles

IMPORTANTE:

■

El Control del refrigerador regula la temperatura del

compartimiento del refrigerador. El Control del congelador

regula la temperatura del compartimiento del congelador.

■

Espere 24 horas después de conectar el refrigerador antes de

colocar alimentos en él. Si agrega alimentos antes de que el

refrigerador se haya enfriado por completo, sus alimentos

podrían echarse a perder.

NOTA: El regular los controles del refrigerador y del

congelador a un ajuste más bajo (frío) no va a enfriar los

compartimientos con más rapidez.

■ Si la temperatura está demasiado caliente o demasiado fría

en el refrigerador o en el congelador, antes de regular los

controles, revise primero los conductos de ventilación para

cerciorarse de que no estén obstruidos.

■ Los ajustes prefijados deben ser los correctos para el uso

doméstico normal. Los controles están debidamente fijados

cuando la leche o los jugos están tan fríos como a usted le

gusta y cuando el helado está firme.

NOTA: Los puntos de ajuste recomendados de fábrica son 0ºF

(-18ºC) para el congelador y 37ºF (3ºC) para el refrigerador.

Para conectar el refrigerador y ver los puntos de ajuste

■

Presione y sostenga Power ON/OFF 2 segundos.

Para ver las temperaturas en centígrados:

■

Presione el botón ºC SELECT (Seleccionar ºC). El indicador

negativo (-) se encenderá. Para volver a mostrar grados

Fahrenheit presione de nuevo ºC SELECT.

NOTA: Si la temperatura del congelador está bajo cero, la luz

indicadora con el signo negativo adyacente a la pantalla del

congelador se encenderá. Esto es normal.

Ajuste de los controles

El rango de punto de ajuste para el congelador es de -5°F a 5°F

(-21°C a -13°C). El rango de punto de ajuste para el refrigerador

es de 34°F a 46°F (1°C a 8°C).

■

Presione el botón del refrigerador o del congelador hacia

MÁS (+) o MENOS (-) hasta llegar a la temperatura deseada.

NOTA: Espere por lo menos 24 horas entre ajustes. Vuelva a

verificar las temperaturas antes de realizar otros ajustes.

Estado del FILTRO DE AGUA y Reajuste

NOTA: No se debe usar con agua que presente peligros

microbiológicos o de calidad desconocida sin la debida

desinfección antes o después del sistema. Pueden usarse

sistemas certificados para la reducción de quistes en aguas

desinfectadas que puedan contener quistes filtrables.

La pantalla del filtro de agua le indicará cuándo deberá cambiar

el filtro. Para cambiar el filtro, vea la sección “Sistema de filtrado

de agua”.

■

Después de reemplazar el filtro del agua, presione RESET y

sosténgalo 2 segundos para cambiar la pantalla del filtro de

agua a 99 por ciento.

CONDICIÓN/MOTIVO: REGULACIÓN DE LA

TEMPERATURA:

REFRIGERADOR demasiado

frío

No están fijados de acuerdo a

las condiciones ambientales

Control del

REFRIGERADOR 1º más

alto

REFRIGERADOR demasiado

caliente

Mucho uso o temperatura

ambiental muy caliente

Control del

REFRIGERADOR 1º más

bajo

CONGELADOR demasiado frío

No están fijados de acuerdo a

las condiciones ambientales

Control del CONGELADOR

1º más alto

CONGELADOR demasiado

caliente/muy poco hielo

Mucho uso o alto consumo de

hielo

Control del CONGELADOR

1º más bajo

INDICADOR: ESTADO:

99 por ciento Nuevo filtro instalado

10 por ciento Pedir filtro de reemplazo

0 por ciento o flujo disminuye Reemplazar el filtro

La page charge ...

Thermador KBURT3651A Manuel utilisateur

Marque: Thermador

Modèle: KBURT3651A

Catégorie: Frigos

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Thermador KBURT3651A User manual
español: Thermador KBURT3651A Manual de usuario
português: Thermador KBURT3651A Manual do usuário

Documents connexes

Autres documents

KitchenAid KBRC36FKS01 Manuel utilisateur