Hyundai HLT-1711 Le manuel du propriétaire

Catégorie
Téléphones
Taper
Le manuel du propriétaire
Please read this manual carefully before operating your set.
Retain it for future reference.
See the label attached on the back cover and quote this infor-
mation to your dealer when you require service.
LCD
Colour Television
LCD
Colour Television
Owners Manual
P/NO : MAN04HY0003
HLT-1711
Installation 3
Remote control handset 4-5
Controls 4
Battery installation 5
Controls of
Front panel 6
Connection of
Back panel 7
Connection to 8-11
External equipment 8-11
Basic operation
On and Off / Programme selection 12
Volume adjustment / Quick view 12
Mute function 12
On screen language selection (option) 12
On screen menus
Menu selection 13
Setting up TV stations 14-19
Auto programme tuning 14
Menual programme tuning 15-16
Programme edit 17-18
Calling the programme table 18
Picture adjustment 19-20
CSM / Picture adjustment 19
Picture format 20
Sound adjustment 21-22
Sound adjustment 21
Stereo/Dual reception 21-22
NICAM reception (option) 22
Sound output selection 22
Time setting
Clock 23
Off time 23
On time 23
Other functions 24-25
TV, AV and PC modes 24
Child lock 24
Auto AV switching 25
Auto sleep 25
Sleep timer 25
Teletext (option) 26-28
Switch on/off 26
SIMPLE text 26
TOP text (option) 27
FASTEXT mode 27
Special teletext functions 28
Connection of PC 29-30
PC in socket (D-Sub jack) 29
Picture adjustment 30
Troubleshooting
check list 31
Contents
2
Power
This set operates on a
DC supply provided by
the AC-DC adaptor,
the voltage is as indi-
cated on the label on
the back cover. Use
only the AC-DC adap-
tor supplied with the
set and never apply an
AC mains to the set
directly. The AC-DC
adaptor operates on
an AC mains supply,
the voltage is as indi-
cated on the label of
the AC-DC adaptor.
a. Connect the DC
plug of the AC-DC adaptor to the 12V socket of the set.
b. Connect the AC-DC adaptor and it’s power cord.
c. Connect the power cord to an AC mains.
In the event of thunderstorms or powercuts, please pull out
the mains plug of the AC-DC adaptor and the aerial plug.
Do not allow anything to rest upon or roll over the power
cord, and do not place the monitor where the power cord is
subject to damage.
Warning
To prevent fire or shock hazard, do not expose the set to
rain or moisture. Do not rub or strike the Active Matrix LCD
with anything hard as this may scratch, mar, or damage the
Active Matrix LCD permanently.
Service
Never remove the back cover of the set as this can expose
you to high voltage and other hazards. If the set does not
operate properly, unplug it and call your dealer.
Aerial
Connect the aerial cable to the
socket marked +75 on the
back. For the best reception an
outdoor aerial should be used.
Location
Position your set so that no
bright light or sunlight falls
directly onto the screen. Care should be taken not to
expose the set to any unnecessary vibration, moisture,
dust or heat. Also ensure that the set is placed in a position
to allow a free flow of air. Do not cover the ventilation open-
ings on the back cover.
The standing angle can be adjusted as shown in pictures.
When you install the set to use the wall mounting bracket
(optional parts), fix it carefully so as not to drop.
Cleaning
Unplug the set before cleaning the face of the LCD Screen.
Dust the set by wiping the screen and the cabinet with a
soft, clean cloth. If the screen requires additional cleaning,
use a clean, damp cloth. Do not use liquid cleaners or
aerosol cleaners.
Installation
3
EN
c
b
a
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front panel of the set.
POWER
switches the set on from standby or off
to standby.
NUMBER BUTTONS
switches the set on from standby and
selects a programme.
PSM (Picture Status Memory)
recalls your preferred picture setting.
LIST
displays the programme table.
MENU
selects a menu.
ARC
select your desired picture format.
EXIT
exits from each mode.
Q.VIEW
returns to the previously viewed programme.
selects a favourite programme.
TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the ‘Teletext’
section.
MUTE
switches the sound on or off.
SSM (Sound Status Memory)
recalls your preferred sound setting.
I/II
selects the language during dual lan-
guage broadcast.
selects the sound output (option).
INPUT SELECT
Select TV, AV1, AV2, SAV or PC mode.
DD
/
EE
(Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
FF / GG (Volume Up/Down)
adjusts the volume.
adjusts menu settings.
OK
accepts your selection or displays the
current mode.
TV/PC
selects TV or PC mode.
SLEEP
sets the sleep timer.
- COLOURED BUTTONS
These buttons are used for teletext
(only TELETEXT models) or pro-
gramme edit.
Remote control handset
Controls
Before you use the remote
control handset, please
install the batteries.
4
i
?
REVEAL
MIX
INDEX
TIME
UPDATE
MODE
SIZE
HOLD
MENU
INPUT SELECT
SLEEP
VOL
VOL
PR
OK
1
3
4 6
7 9
2
5
8
0
I / II
ARC
LIST
EXIT
PR
TEXT
TV/PC
Q.VIEW
X
M
PSM
SSM
EN
The remote control handset is powered by two AAA/Alkaline type batteries.
To insert batteries, turn the remote
control handset over and remove the
battery cover.
Remote control handset
Battery installation
5
1
1
Put the two batteries into the compart-
ment observing battery polarity.
2
2
Replace the cover.
3
3
Note :
To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control hand-
set for an extended period time. Do not use batteries of differing age or type. Always discard of batteries safely.
1. POWER/STANDBY INDICATOR (rr)
illuminates red in standby mode.
illuminates green when the set is switched on.
2. ON/OFF (
rr
)
switches the set on from standby or off to
standby.
Note : Power line lives even when the power
is off.
3. INPUT SELECT
select TV, AV1, AV2, SAV or PC mode.
4. MENU
selects a menu.
5. FF / GG (Volume Up/Down)
adjusts the volume.
adjusts menu settings.
6.
DD
/
EE
(Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
7. HEADPHONE SOCKET
Connect the headphone plug to this socket.
8. MAIN POWER (I / O)
switches the set on or off.
Front panel
Controls of
Front panel
6
INPUT INPUT
SELECTSELECT
MENU MENU
INPUT INPUT
SELECTSELECT
MENU MENU
INPUT INPUT
SELECTSELECT
MENU MENU
2
3
4
78
15
6
1. POWER CORD SOCKET
2. RGB INPTUT(PC/DTV INPUT) / L/R IN
Connect the set output socket of the PERSONAL COM-
PUTER to this socket.
3. EURO SCART SOCKET
connect the euro scart socket of the VCR to these sock-
ets.
4. S-VIDEO INPUT
connect video out from an S-VIDEO VCR to the S-
VIDEO input.
5. AERIAL SOCKET
connect the RF socket of the VCR to the aerial sockets.
Connections of
Back panel
7
EN
DC-12VDC-12V
RGB INRGB IN
(PC/DTV INPUT)(PC/DTV INPUT)
L/R INL/R IN
AAV1V1
AAV2 V2
S-VIDEOS-VIDEO
ANTANT IN IN
1
2
3
5
4
8
Connection to
External equipment
NN
PUT)PUT)
L/R INL/R IN
AAV1V1
AAV2 V2
S-VIDEOS-VIDEO
ANTANT IN IN
VCR
Aerial socket
1
1
S-VIDEO
OUT
IN
(R) AUDIO (L) VIDEO
AAV2 V2
S-VIDEOS-VIDEO
ANTANT IN IN
Watching VCR
2
2
< Back panel of the set >
< Back panel of the set >
< Back panel of the VCR>
You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below.
1.Connect the RF out socket of the VCR to the aerial
socket of the set.
2.Connect the aerial cable to the RF aerial in socket of
the VCR.
3.Store the VCR channel on a desired programme num-
ber using the ‘Manual programme tuning’ section.
4.Select the programme number where the VCR channel
is stored.
5.Press the PLAY button on the VCR.
- If you connect an S-VIDEO
VCR to the S-VIDEO input,
the picture quality is
improved ; compared to con-
necting a regular VCR to the
Video input.
If a 4:3 picture format is
used;the fixed imgae may
remain visible on the screen.
- To avoid picture noise (inter-
ference), leave an adequate
distance between the VCR
and set.
1.Use the INPUT SELECT button on the remote control
to select AV1 or AV2.
(If connected to S-VIDEO, select the SAV external input
source.)
2. Insert a video tape into the VCR and press the PLAY
button on the VCR.
(See VCR owner’s manual)
9
EN
Connection to
External equipment
Watching Cable TV
DC-12VDC-12V
RGB INRGB IN
(PC/DTV INPUT)(PC/DTV INPUT)
L/R INL/R IN
AAV1V1
AAV2 V2
S-VIDEOS-VIDEO
ANTANT IN IN
AAV2 V2
S-VIDEOS-VIDEO
ANTANT IN IN
/R IN/R IN
AAV1V1
Cable
TV
(R) AUDIO (L) VIDEO
VCR
RF
Cable
TV
(R) AUDIO (L) VIDEO
VCR
RF
3
3
Watching external AV source
R L
AUDIO VIDEO
GB INGB IN
V INPUT)V INPUT)
L/R INL/R IN
AAV1V1
AAV2 V2
S-VIDEOS-VIDEO
ANTANT IN IN
4
4
< Back panel of the set >
< Back panel of the set >
< Back panel of the external equipment >
Camcorder
Video game set
< Back panel of the set >
< Cable Box >
For cable Box
After subscribing for a local cable TV station and
installing a converter you can watch cable TV.
For further information of cable TV, contact the local TV
station.
In using connection 1
1.Select programme number in programme switch of
cable box.
2.Match the set programme with selected programme of
cable box.
3. Select your desired programme with the remote control
for cable box.
In using connection 2
1.Use the INPUT SELECT button on the remote control
and select AV1 or AV2.
2.Tune to cable service provided channels using the
cable box.
When connecting the set to an external source,match
the colours of AUDIO/VIDEO input jacks on the set with
the output jacks on the audio/video eqipment : Video =
yellow, Audion(Left) = white, Audio (Right) = red.
1.Use the INPUT SELECT button on the remote control
to select AV1 or AV2.
2.Operate the corresponding external equipment.
See external equipment operating guide.
Connection to
External equipment
10
How to connect
Connect DVD Video or S-Video output to VIDEO or S-VIDEO input and DVD Audio outputs to AUDIO INPUT of the
TV.
How to use
1.Turn on the DVD player, and insert a DVD.
2.Use INPUT SELECT button on the remote control to select AV1 or AV2. Refer to the DVD player's manual for oper-
ating instructions.
Watching DVD
(R) AUDIO (L)
S-VIDEO
RGB IN
(PC/DTV INPUT)
L/R IN
AV1
AV2
S-VIDEO
ANT IN
5
5
< Back panel of the set >
< Back panel of a DVD player >
EN
Connection to
External equipment
11
1.Connect the signal cable from the monitor output
socket of the PERSONAL COMPUTER to the RGB
INPUT (PC/DTV INPUT) socket of the set.
2.Connect the audio cable from the PC to the L/R IN
sockets of the set.
3.Press the INPUT SELECT button to select PC.
4.Switch on the PC, and the PC screen appears on the
set.
Connecting PC
7
7
< Back panel of the set >
- To watch digitally broadcast programs, pur-
chase and connect a digital set-top box.
How to connect
Use the set’s RGB jack for video connections,
depending on your set-top box connector. Then,
make the corresponding audio connections.
How to use
1.Turn on the digital set-top box. (Refer to the
owners manual for the digital set-top box.)
2.Use INPUT SELECT button on the remote con-
trol to select PC.
Watching DTV
6
6
< Back panel of the set >
< Back panel of a digital SET-TOP BOX >
1212
Press the FF / GG button to
adjust the volume.
Press the POWER,
DD
/
EE
,
INPUT SELECT or NUM-
BER buttons to switch it on
fully.
Press the POWER button.
The set reverts to standby
mode.
Pull out mains plugs to
switch the set off.
Note : If, while the set is
switched on, the mains plug
is disconnected the set will
switch to standby or power
on when the mains plug is
replaced in the mains power
socket.
Basic operation
1
1
On and Off
3
3
Volume adjustment
Press the Q.VIEW button to
view the last programme
you were watching.
Note : This function works
only when Favourite pro-
gramme
is set to Off.
Otherwise each press of this
button will select a stored
favourite programme.
4
4
Quick view
You can select a programme
number with the DD / EE or
NUMBER buttons.
2
2
Programme selection
Press the MUTE button. The
sound is switched off and
the display
W
appears.
You can cancel it by press-
ing the MUTE,
FF / GG, SSM,
I/II button.
5
5
Mute function
The menu can be displayed
on the screen in your
desired language. First
select your language.
Repeatedly press the
MENU button to select the
Special menu.
Press the
DD
/
EE
button to
select
Language.
Press the OK button.
Press the
DD
/
EE
button to
select your desired lan-
guage.
Press the OK button.
All the on screen displays
will appear in the selected
language.
Repeatedly press the
MENU button to return to
normal TV viewing.
6
6
On screen language
selection (option)
EN
13
The dialogue between you and your set takes place on screen with an operator menu.
The buttons required for the operating steps are also displayed.
Repeatedly press the MENU but-
ton to display each menu.
On screen menus
Menu selection
1
1
Press the
DD
/
EE
button to select a
menu item.
The selected menu item changes
from white to red.
2
2
Press the FF / GG button to change
the setting of a menu item or OK
button to display the sub menu.
3
3
Picture menu
()O}{OOKOMENUOEXIT
Station menu
()OOKOMENUOEXIT
Sound menu
()OOKOMENUOEXIT
Time menu
()O}{OOKOMENUOEXIT
Special menu
()O}{OMENUOEXIT
AutoOprogramme
ManualOprogramme
Program meOedit
FavouriteOprogramme
CSM Normal
Contrast 100
Brightness 95
Colour 85
Sharpness 80
Equalizer
Balance 0
AVL Off
Clock
-i-i:i-i-
AM
OffOtime
-i-i:i-i-
AM
Off
OnOtime
-i-i:i-i-
AM
Pr. 1
VOL. 30
Off
Input TV
ChildOlock Off
AutoOsleep Off
Language
1414
Up to 100 TV stations can be stored in this set by programme numbers (0 to 99). Once you have preset the stations, you will
be able to use the
DD
/
EE
or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using auto-
matic or manual modes.
All stations that can be received are stored by this method. It is recommended that you use auto programme during instal-
lation of this set.
Repeatedly press the
MENU button to
select the Station
menu.
Setting up TV stations
Auto programme tuning
1
1
Press the
DD
/
EE
button to select Auto pro-
gramme
.
Press the OK button to display the
Auto pro-
gramme
menu.
Press the
DD
/
EE
button to select System.
Select a TV system with the
FF / GG button;
L : SECAM L/L (France)
BG : PAL B/G, SECAM B/G (Europe/East
Europe)
I : PAL I/II (U.K./Ireland)
DK: PAL D/K, SECAM D/K (East Europe)
Press the
DD
/
EE
button to select Storage
from
.
Select the beginning programme number with
the
FF / GG button or NUMBER buttons. Any
number under 10 is entered with a numeric Ô
0Õ
in front of it, i.e. Ô
05Õ for 5.
Press the OK button.
2
2
Press the
DD
/
EE
button to select Start.
Press the OK button to begin auto program-
ming.
All receivable stations are stored. The station
name is stored for stations which broadcast
VPS (Video Programme Service), PDC
(Programme Delivery Control) or TELETEXT
data. If no station name can be assigned to a
station, the channel number is assigned and
stored as
C (V/UHF 01-69) or S (Cable 01-47),
followed by a number.
To stop auto programming, press the MENU
button.
When auto programming is completed, the
Programme edit menu appears on the
screen. See the ‘Programme edit’ section to
edit the stored programme.
Repeatedly press the MENU button to return
to normal TV viewing.
3
3
()O}{OMENUOEXIT
()O}{OMENUOEXIT
MENU
1
2%
System BG
Storage Ofrom 1
Start
System BG
Storage Ofrom 1
Start
System BG
StorageOfrom 1
Start CO002
EN
15
Manual programme lets you manually tune and arrange the stations in whatever order you desire.
Also you can assign a station name with five characters to each programme number.
Setting up TV stations
Manual programme tuning
Repeatedly press
the MENU button to
select the Station
menu.
Press the
DD
/
EE
button to select Manual pro-
gramme
.
Press the OK button to display the Manual pro-
gramme
menu.
Press the
DD
/
EE
button to select Storage.
Select the desired programme number (0 to 99)
with the FF / GG button or NUMBER buttons. Any
number under 10 is entered with a numeric Ô0Õ in
front of it, i.e. Ô05Õ for 5.
Press the OK button.
Press the
DD
/
EE
button to select System.
Select a TV system with the FF / GG button on the
System pull-down menu;
L : SECAM L/L (France)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I : PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
Press the OK button.
1
1
2
2
Press the
DD
/
EE
button to select Channel.
Press the FF / GG button to select V/UHF or
Cable on the Channel pull-down menu.
If possible, select the channel number
directly with the number buttons. Any num-
ber under 10 is entered with a numeric Ô0Õ
in front of it, i.e. Ô05Õ for 5.
Press the OK button.
Press the
DD
/
EE
button to select Search.
Press the FF / GG button to commence
searching on the Search pull-down menu.
If a station is found the search will stop.
Press the OK button to store it. The display
Stored will appear.
Repeatedly press the MENU button to
return to normal TV viewing.
3
3
()OOKOMENUOEXIT
()O}{O0
-
9OOKOMENUOEXIT
Stored
AutoOprogramme
ManualOprogramme
Program meOedit
FavouriteOprogramme
Storage 1
System BG
Channel V®UHF 1
Fine {{{
Search
Name CO01
Storage 1
System BG
Channel V®UHF 1
Fine {{{
Search
Name CO01
1616
Setting up TV stations
Manual programme tuning
Repeatedly press the MENU button to select the Station
menu.
Press the
DD
/
EE
button to select Manual programme.
Press the OK button to display the Manual programme
menu.
Press the
DD
/
EE
button to select Name.
Press the GG button and then
DD
/
EE
button to use a blank,
+, -, the numeric 0 to 9 and the alphabet A to Z.
Select the next position by pressing the FF / GG button and
then make your choice of the second character, and so on.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
4
4
Repeatedly press the MENU button to select the Station
menu.
Press the
DD
/
EE
button to select Manual programme.
Press the OK button to display the Manual pro-
gramme
menu.
Press the
DD
/
EE
button to select Fine.
Press the FF / GG button to fine tune for the best picture
and sound.
Press the OK button.
Repeatedly press the MENU button to return to normal
TV viewing.
The finely tuned programme will be indicated by a yellow
number during programme selection.
()O}{OOKOMENUOEXIT
()OOKOMENUOEXIT
Fine tuning
AutoOprogramme
ManualOprogramme
Program meOedit
FavouriteOprogramme
Storage 1
System BG
Channel V®UHF 1
Fine {{{
Search
Name CO01
EN
17
This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme
numbers or insert a blank station data into the selected programme number.
Setting up TV stations
Programme edit
Repeatedly press
the MENU button to
select the Station
menu.
Press the
DD
/
EE
but-
ton to select
Programme edit.
Press the OK button
to display the
Programme edit
menu.
1
1
Select a programme to be delet-
ed with the
DD
/
EE
or FF / GG but-
ton.
Press the RED button twice.
The selected programme is
deleted, all the following pro-
grammes are shifted up one
position.
2
2
3
3
4
4
Deleting a programme
Select a programme to be
copied with the
DD
/
EE
or FF / GG
button.
Press the GREEN button.
All the following programmes
are shifted down one position.
5
5
Copying a programme
MENU
Delete
()OOKOMENUOEXIT
()O}{OOKOMENUOEXIT
AutoOprogramme
ManualOprogramme
Program meOedit
FavouriteOprogramme
00O CO 1DOO 05O SO 69
01O CO 03OO 06O SO 17
02O CO 12OO 07O SO 22
03O SO 66OO 08O CO 09
04O SO 67OO 09O CO 11
Delete Copy
Move Skip
00O CO 1DOO 05O SO 69
01O CO 03OO 06O SO 17
02O CO 12OO 07O SO 22
03O SO 66OO 08O CO 09
04O SO 67OO 09O CO 11
Select a programme to
be moved with the
DD
/
EE
or FF / GG button.
Press the YELLOW but-
ton.
Move the programme to
the desired programme
number with the
DD
/
EE
or FF / GG button.
Press the YELLOW but-
ton again to release this
function.
Moving a programme
Select a programme number to be
skipped with the
DD
/
EE
or FF / GG but-
ton.
Press the BLUE button. The
skipped programme turns to blue.
Press the BLUE button again to
release the skipped programme.
When a programme number is
skipped it means that you will be
unable to select it using the
DD
/
EE
button during normal TV viewing.
If you want to select the skipped
programme, directly enter the pro-
gramme number with the NUM-
BER buttons or select it in the pro-
gramme edit or table menu.
Repeatedly press the MENU but-
ton to return to normal TV viewing.
Skipping a programme number
()O}{OMENU
Move0Off
00O CO 1DOO 05O SO 69
01O CO 03OO 06O SO 17
02O CO 12OO 07O SO 22
03O SO 66OO 08O CO 09
04O SO 67OO 09O CO 11
18
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme table
contains ten programmes as below.
Note :
a. You may find some blue programmes. They have been set up to be
skipped by auto programming or in the programme edit mode.
b. Some programmes with the channel number shown in the pro-
gramme table indicate there is no station name assigned.
Displaying programme table
Select a programme with the
DD
/
EE
or FF / GG button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting a programme in the programme table
There are 10 programme table pages in which contain 100 pro-
grammes.
Pressing the
DD
/
EE
or FF / GG button repeatedly turns the pages.
Repeatedly press the MENU button to return to normal TV viewing.
Paging through a programme table
You can check the programmes stored in the memory by displaying the
programme table.
()O}{OOKOMENU
18
Setting up TV stations
Programme edit
This function lets you select your favourite pro-
grammes directly.
Repeatedly press the MENU button to select
the
Station menu.
Press the
DD
/
EE
button to select Favourite
programme
.
Press the OK button to display the
Favourite
programme
menu.
Press the
FF / GG button to select On or Off.
Press the
DD
/
EE
button to select -- -----.
Select a desired programme with the
FF / GG but-
ton or NUMBER buttons. Any number under 10
is entered with a numeric Ô
0Õ in front of it, i.e. Ô05Õ
for 5.
You can store up to 5 programmes.
Repeatedly press the MENU button to return to
normal TV viewing.
Repeatedly press the Q.VIEW button to select
stored favourite programmes.
Favourite programme Calling the programme table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme table
contains ten programmes as below.
Note :
a. You may find some blue programmes. They have been set up to be
skipped by auto programming or in the programme edit mode.
b. Some programmes with the channel number shown in the pro-
gramme table indicate there is no station name assigned.
Displaying programme table
Select a programme with the
DD
/
EE
or FF / GG button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting a programme in the programme table
There are 10 programme table pages in which contain 100 pro-
grammes.
Pressing the
DD
/
EE
or FF / GG button repeatedly turns the pages.
Repeatedly press the MENU button to return to normal TV viewing.
Paging through a programme table
You can check the programmes stored in the memory by displaying the
programme table.
Calling the programme table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme table
contains ten programmes as below.
Note :
a. You may find some blue programmes. They have been set up to be
skipped by auto programming or in the programme edit mode.
b. Some programmes with the channel number shown in the pro-
gramme table indicate there is no station name assigned.
Displaying programme table
Select a programme with the
DD
/
EE
or FF / GG button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting a programme in the programme table
There are 10 programme table pages in which contain 100 pro-
grammes.
Pressing the
DD
/
EE
or FF / GG button repeatedly turns the pages.
Repeatedly press the MENU button to return to normal TV viewing.
Paging through a programme table
You can check the programmes stored in the memory by displaying the
programme table.
Calling the programme table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme table
contains ten programmes as below.
Note :
a. You may find some blue programmes. They have been set up to be
skipped by auto programming or in the programme edit mode.
b. Some programmes with the channel number shown in the pro-
gramme table indicate there is no station name assigned.
Displaying programme table
Select a programme with the
DD
/
EE
or FF / GG button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting a programme in the programme table
There are 10 programme table pages in which contain 100 pro-
grammes.
Pressing the
DD
/
EE
or FF / GG button repeatedly turns the pages.
Repeatedly press the MENU button to return to normal TV viewing.
Paging through a programme table
You can check the programmes stored in the memory by displaying the
programme table.
Calling the programme table
()O}{OOKOMENUOEXIT
000off
000
__0_____
000
__0_____
000
__0_____
000
__0_____
000
__0_____
00O CO 1DOO 05O SO 69
01O CO 03OO 06O SO 17
02O CO 12OO 07O SO 22
03O SO 66OO 08O CO 09
04O SO 67OO 09O CO 11
EN
19
Picture adjustment
Repeatedly press the MENU button to select the Picture
menu.
Press the
DD
/
EE
button to select the desired picture item.
Press the FF / GG button to make appropriate adjustments.
Press the OK button to store it for the picture User.
The display Stored appears.
Repeatedly press the MENU button to return to normal TV
viewing.
You can also recall a desired picture (Dynamic,
Standard, Mild, Game or User) with PSM button on the
remote control.
The picture Dynamic, Standard, Mild and Game are
programmed for optimum picture reproduction at the factory
and cannot be changed.
2
2
Picture adjustment
To initialize values (reset to default settings), select
the Normal option. When adjusting color tempera-
ture options (red, green or blue) manually, CSM is
automatically changed to User.
Press the MENU button and then
DD / EE
button to
select the PICTURE menu.
Press the GG button and then
DD / EE
button to select
CSM.
Press the GG button and then
DD / EE
button to select the
desired colour temperature.
Press the MENU button to save.
1
1
CSM (Colour Status Memory)
CSM Normal
Contrast 100
Brightness 95
Colour 85
Sharpness 80
()OOKOMENUOEXIT
CSM Normal
Contrast 100
Brightness 95
Colour 85
Sharpness 80
You can adjust picture contrast, brightness, colour intensity, sharpness and tint (NTSC AV only) to the levels you prefer.
2020
Picture adjustment
You can watch TV in various picture formats; 16:9, 14:9, 4:3, Zoom 1, Zoom 2, Auto.
Repeatedly press the ARC button to select your desired picture format.
1. Press the ARC button to select a desired picture format.
• Each press of ARC button changes the screen display as shown below.
You can also select 16:9, 14:9, 4:3, Zoom 1, Zoom 2, Auto in the SCREEN menu.
Note :
a. 16:9
and
4:3
are available in PC mode only.
b. If 4:3 is on the screen for a long time, that fixed image may remain visible.
3
3
Picture format
16 : 9
Auto
14 : 9
4 : 3
Zoom 2 Zoom 1
16 : 9
Auto
14 : 9
4 : 3
Zoom 2 Zoom 1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160

Hyundai HLT-1711 Le manuel du propriétaire

Catégorie
Téléphones
Taper
Le manuel du propriétaire