Bauknecht TRKB 7680 Program Chart

Marque: Bauknecht

Modèle: TRKB 7680

Catégorie: Machines à laver

Taper: Program Chart

Machine operation

Additional information (including troubleshooting and service) can be found in the individual sections of the

Instructions For Use.

Sort laundry by:

Material thickness:

whenever the load is greater than the dryer can handle,

separate laundry according to weight (e.g. dry towels and thin underwear separately).

Type of material:

cotton (linen); synthetic textiles (easy care).

Dryness level:

cupboard dry, iron dry etc.

Do not tumble dry:

woollens, silk, nylon stockings, delicate embroidery, fabrics with

metallic decorations, bulky items such as sleeping bags or pillows.

Check that all fastenings are closed and that pockets are empty. Ensure that there are

no cigarette lighters in the wash. Turn laundry inside out.

Place laundry loosely in the drum to achieve even drying throughout. Then close the

door.

Select the required drying programme by turning the programme selector knob (for

information, refer to programme table).

Select the required option by pressing the corresponding button.

The indicator lamp above the relevant button lights up to confirm your selection.

A fast blinking LED indicates that an invalid selection has been made (incompatible

option). Press the button again to cancel the option.

Start the drying programme by pressing the

“Start (Pause)”

button.

The relevant indicator lamp lights up.

Changing programme selection:

if the selected programme is changed during

drying, the dryer stops. The

“Start (Pause)”

indicator lamp flashes.

To run the new programme, press the

“Start (Pause)”

button again.

Interrupting programme:

to interrupt a drying cycle, press the

“Start (Pause)”

button and open the door. Wait at least 5 minutes, to allow the laundry to cool down,

before unloading the dryer. For your safety, the drying cycle stops automatically if you

open the door. To restart the cycle after opening the door, press the

“Start (Pause)”

button again.

Warning:

never stop a tumble dryer before the end of the drying cycle, unless all

items are quickly removed and spread out so that the heat is dissipated.

The final part of a drying cycle occurs without heat (cool-down cycle) to ensure that

the items reach a lower temperature to avoid wrinkling.

End:

take the laundry out of the dryer. The drying process is complete and the anti-

crease phase has been reached (active).

Set the programme selector knob to “Off” (“

”).

Set the programme selector knob to “Off” (“

”).

Cleaning the lint filter:

open door, pull lint filter up and out of machine and open it. Brush lint using a soft brush or your

fingertips. Close lint filter and push firmly back into place (more detailed informations are given in the Instructions For Use).

Emptying the water container:

pull container out by the handle and empty. Replace the container when empty by pushing it

completely back into place.

Please note:

only use additives/plastic items specified as dryer safe and rinse items that have been treated with stain remover

thoroughly in plenty of water before drying. Never dry rubber objects or objects stained with vegetable oils in the dryer.

The Manufacturer is not liable for any damage to laundry resulting from inadequate or incorrect fabric care instructions which

have been provided with the garment or article.

Sort laundry according to

care symbols

Do not tumble dry

Suitable for tumble drying -

Suitable for tumble drying

at low temperatures

Prepare laundry

Load dryer

Select programme

Select options

(if available)

Start dryer

Programme end -

unload dryer

Switch dryer off

Weight of average and maximum load.

Test programmes according to EN 61121, tested with maximum rated load capacity.

Overview of programmes Options

Approximate

drying times

(in minutes)

Programmes / Drying levels

Type of text i l e

Fabrics

Volume

of load

Gentle

Schonen

Délicat

Buzzer

Summer

Sonnerie

Anti-

crease

Knitter-

schutz

Anti-

froissage

Dryness

adjustment

Trocken-

grad

Niveau de

séchage

Start

delay

Start-

vorwahl

Départ

différé

Very

wet

load

Wet

load

Extra dry

Multi-layered, thick laundry such as: terry towels, terry

towelling bath robes.

Cotton or linen hot wash/

coloured laundry

Max. 7 kg

3.0

7.0

X X X X X

95’

185’

80’

160’

Cupboard dry +

Terry towels, dry towels, bed linen, underwear.

3.0

7.0

X X X X X

80’

170’

70’

140’

Cupboard dry **

Similar types of laundry which do not require ironing such

as: dry towels, bed linen, underwear, baby clothes,

T-shirts, cotton socks.

3.0

7.0

X X X X X

75’

140’

65’

120’

Iron dry **

Laundry which requires ironing such as: bed and table

linen, dry towels, T-shirts, polo shirts, work clothes.

3.0

7.0

X X X X X

65’

115’

55’

100’

Extra dry

Laundry with thick, multi-layered areas such as: bed and

table linen, track suits, anoraks, blankets.

Synthetic, mixed fibre or cotton easy

care (ironing not required) laundry

Max. 3.5 kg

1.0

3.5

X X X X X

40’

70’

30’

55’

Cupboard dry **

Laundry which does not require ironing such as: shirts,

blouses, T-shirts, sportswear.

1.0

3.5

X X X X X

40’

60’

25’

45’

Iron dry

Laundry which requires ironing such as: trousers,

dresses, skirts, shirts, blouses.

1.0

3.5

X X X X X

30’

50’

20’

40’

Delicate plus

Low drying intensity for delicates and items such as:

trousers, dresses, shirts, blouses.

Laundry made from synthetic fibres

Max. 2.5 kg

2.5 X X X — X 105’ 90’

Mixed load

T-shirts, blouses, towels, underwear, sportswear.

Cotton - Synthetic blend

Max. 3.0 kg

3.0 X X X X X 85’ 70’

Laundry is aired, refreshed and loosen up

for 30 minutes without heating.

All textiles.

— — X — — — — —

30’ 40’ 60’ 90’

Additional drying time for textiles that are not suitable for

other programmes, or for finalisation of the drying

process.

All fabrics

— X X X — —

30’ 40’

60’ 90’

Cotton

Extratrocken

Prêt à ranger

Koch-/Buntwäsche

Coton

chranktrocken plus

Prêt à porter plus

Schranktrocken

Prêt à porter

Bügeltrocken

Prêt à repasser

Easy care

Extratrocken

Prêt à ranger

Pflegeleicht

Synthétiques

Schranktrocken

Prêt à porter

Bügeltrocken

Prêt à repasser

Special programmes

Supersanft

Fibres sensibles

Supersanft

Fibres sensibles

Mischwäsche

Mixte

Mischwäsche

Mixte

Airing

Lüften

Ventilation

Drying

times

Zeitprogramme

Minuterie

How to proceed if...

...you want to check the dryer yourself first:

(If your machine is not functioning correctly, please

check the following points before calling the Customer Service department - also refer to relevant

section in the Instructions For Use).

Drying takes too long/

Laundry is not dry enough

• Was the inserted laundry too wet (washing machine spin speed less than 1000 rpm)?

• Is the lint filter dirty? (filter indicator light on)

• Is the heat exchanger dirty? (for more information, refer to the Instructions For Use)

• Is the room temperature too high?

• Are the “End” and “Anti-crease” indicator lamps lighting up? The drying cycle is

complete and the laundry can be taken out.

• If the drying result does not meet your expectation, select a drier programme or use

the dryness adjustment option (if available).

• Are thin and thick laundry mixed? Are different types of materials mixed? Sort the

laundry by thickness and material, then dry it again.

The dryer does not

operate (after a power

failure, always press the

“Start (Pause)” button)

• Is the plug properly inserted into the mains electricity socket?

• Is there a power failure?

•Has the fuse blown?

• Is the door properly closed?

• Has a drying programme been selected?

•Has the

“Start (Pause)”

button been pressed?

• Has the start delay option been selected?

• Is the dryer overloaded? Please remove some of the load.

Lint filter, water container

or heat exchanger

indicator lamp on

• Is the lint filter clean?

• Is the water container empty?

• Has the water container been inserted correctly?

• Is the heat exchanger clean and inserted correctly?

Water droplets

underneath the dryer

• Has the heat exchanger been inserted correctly?

• Has all lint on the heat exchanger seal and the door seal been wiped away?

• Has the water container been inserted correctly?

• If the direct drain connection is used, is it tight?

• Is the dryer levelled?

...you want to care for and clean your dryer:

Clean the filter at the end

of every cycle

• Brush lint using a soft brush or your fingertips.

• Close the filter.

• Push the filter back into place.

Empty the water container

at the end of every drying

cycle

• Pull the handle to remove the water container.

• Empty the water container.

• Replace the empty water container by pushing it fully back into place.

Clean the heat exchanger

at least once a month

• Clean the heat exchanger under running water.

• Remove all lint from the seals.

• Clean the heat exchanger housing (for further information see section “Cleaning the

heat exchanger” in the Instructions for Use).

Failure codes

In the event that the dryer malfunctions, one of the following failure codes may be displayed.

Depending on the model of your dryer, the failure may be displayed in letters or by different

blinking LEDs.

Failure code LED failure code Check to be carried out by customer before service call

F01

Please call the After-Sales Service.

F02

Please call the After-Sales Service.

F03

Please call the After-Sales Service.

F04

Please call the After-Sales Service.

F05

Turn the dryer OFF and unplug it. Make sure that the ambient temperature is

between 5°C and 35°C. Wait for 1 hour. Plug the dryer back in and restart it. If the

failure reoccurs, please call the After-Sales Service.

F06

Turn the dryer OFF and unplug it. Make sure that the ambient temperature is

between 5°C and 35°C. Wait for 1 hour. Plug the dryer back in and restart it. If the

failure reoccurs, please call the After-Sales Service.

F07

Please call the After-Sales Service.

F10 - 15

Turn the dryer OFF and unplug it. Wait for 5 minutes. Plug the dryer back in and restart it.