Pulsar Trail Le manuel du propriétaire

Taper
Le manuel du propriétaire
TRAIL
Thermal Imaging Sights
Operating Instructions
English | Français | Deutsch | Español | Italiano
http://www.pulsar-vision.com/es/products/visores-t-rmicos/
¡Atención! Los visores de visión térmica Trail requieren una licencia si se
exportan fuera de su país.
Compatibilidad electromagnética
Per informazioni dettagliate sul dispositivo, scaricare il manuale d'uso completo:
Advertencia: el funcionamiento de este equipo en áreas residenciales podría
causar radio interferencias.
Para obtener información detallada acerca del dispositivo, descargue el manual
de usuario al completo:
Questo prodotto è conforme alla norma europea EN 55032:2015, Classe A.
Attenzione! I cannocchiali termici Trail necessitano una licenza se esportati al di
fuori del proprio paese.
Compatibilità elettromagnetica
Avvertenza: l'uso di questa apparecchiatura in un'area residenziale può causare
perturbazioni radioelettriche.
http://www.pulsar-vision.com/products/thermal-imaging-sights/
Este producto cumple con la reglamentación de la UE EN 55032:2015, Clase A.
Electromagnetic compliance
Für detaillierte Informationen über das Gerät, bitte das vollständige Handbuch
herunterladen:
Elektromagnetische Verträglichkeit
Das Produkt entspricht der Europäischen Norm EN 55032:2015, Klasse A.
Pour des informations détaillées sur la lunette, prière de télécharger le manuel
complet d'utilisation:
http://www.pulsar-vision.com/de/products/w-rmebild-zielfernrohre/
Achtung! Wärmebildzielfernrohre Trail benötigen eine Lizenz, wenn sie
außerhalb Ihres Landes exportiert werden.
http://www.pulsar-vision.com/products/thermal-imaging-sights/
Attention! L'utilisation de ce matériel dans un environnement résidentiel peut
produire des interférences radio.
Ce produit est conforme à la norme européenne EN 55032:2015, Classe A.
Warning! Operation of this equipment in a residential environment could cause
radio interference.
For detailed information about the device, please download the complete user
manual: http://www.pulsar-vision.com/products/thermal-imaging-sights/
Warnung! Der Betrieb dieses Gerätes im Wohngebiet kann Funkstörungen
verursachen.
Attention! Les viseurs d'imagerie thermique Trail nécessitent une licence s'ils
sont exportés hors de votre pays.
This product complies with EU Standard EN 55032:2015, Class A.
Compatibilité électromagnétique
Attention! Trail thermal imaging sights require a license if exported outside your
country.
EN
FR
DE
ES
IT
TRAIL
Thermal Imaging Sights
Detection distance
(deer type object), m (y)
Detection distance
(deer type object), m (y)
7 / 6400
7 / 6400
Built-in video and sound recorder
Four observation modes: forest, rocks, identification, user
"Image Detail Boost" function (only XP models)
IPS7/IPS14
IPS7/IPS14
Operating modes / Navigation UP/
RIGHT (menu)
Black Hot /
White Hot modes
When keeping the battery for a long period, the battery should not
be fully charged or fully discharged.
Do not charge the battery immediately after bringing the battery
from cold environment to a warm one. Wait for 30-40 minutes for
the battery to get warm.
Wi-Fi activation
General settingsMenuMenu
Basic mode – it allows you to select one of the three modes
as the basic one for the user mode.
Graphics
brightness
= Select submenu with UP (3) and DOWN (5)
buttons.
= Hold down the M (4) button to enter the main
menu.
= Press briefly the M button the enter the submenu.
= Set the desired graphics brightness (menu and
status bar icons) from 0 to 10 with UP/DOWN
buttons.
The devices have four operating modes of the
thermal imager: Forest (observation mode of
objects within low thermal contrast conditions),
Rocks (observation mode of objects within high
thermal contrast conditions), Identification (high
detalization mode), User (individual brightness and
contrast settings).
= Select one of the settings described below with
the UP / DOWN buttons.
= Press and hold the Menu button to enter the
menu.
Identification Mode This is the best mode when
observing objects within adverse weather
conditions (fog, mist, rain and snow). It allows you to
recognize the characteristics of an object being
observed more clearly. Zoom increase may be
accompanied by insignificant image graininess.
Note: Quick activation of the operating modes is
possible by using the UP button (3). Short press of
the UP button (3) activates the switching of the
operating modes.
Forest Mode This is the best mode when
searching and observing within field conditions,
against the background of leaves, bushes and
grass. The mode is highly informative about an
object being observed as well as landscape details.
User Mode It allows you to configure and save
custom brightness and contrast settings, as well as
one of the three modes as basic.
= Select the 'Operating mode' option.
= A short press of the Menu button confirms the
selection.
Rocks Mode This is the best mode when
observing objects after a sunny day or within urban
conditions.
= A short press of the Menu button opens the menu.
= Confirm your selection with a short press of the M
button.
21
The default password (12345 or 12345678
depends on product firmware) will appear on
the screen.
= Confirm you selection with a short press of the M
button.
= Select the desired reticle shape out of the list with
UP (3) and DOWN (5) buttons.
Selection of reticle shapes.
= Enter the submenu “Reticle type” with a short
press of the M button.
= Enter the main menu with a long press of the M (4)
button.
= The reticle types change as the cursor goes down
the reticle list.
Selection of reticle color
= Enter the main menu with a long press of the M (4)
button.
= Confirm you selection with a short press of the M
button.
= Select the desired reticle color: black, white, fully
black or fully white - with UP (3) and DOWN (5)
buttons.
= Enter the submenu “Reticle color” with a short
press of the M button.
time
“Units of measure”
= With the microphone on, you will have audio track
in your video. Microphone is off by default.
= Select submenu with UP (8) and DOWN (10)
buttons.
= Hold down the M (9) button to enter the main
menu.
= Turn the microphone on/off with a short press of
the M (9) button.
= Press briefly the M (9) button the enter the
submenu.
Microphone
Off
= Enter the submenu “Side incline” with a short press of the M button.
= Enter the main menu with a long press of the M (4) button.
= Confirm your selection with a short press of the M button.
= Select “On” with the UP (3) and DOWN (5) buttons to activate side
incline; «Off» to deactivate.
Upwards > 70°; Downwards >70°; Leftwards >30°;
Rightwards >30°
This option allows you to activate automatic shutdown
the sight which determines whether your riflescope is in a
shooting position. Automatic shutdown is actuated after
you move the riflescope relative to the optical axis:
Note: if Auto shutdown is active, the status bar shows the respective
icon and selected time period 1 min.
= Enter the main menu with a long press of the M (4) button.
= Enter the submenu “Auto shutdown” with a short press of the M button.
= With the UP (3) and DOWN (5) buttons select the time period (1 min, 3
min, 5 min) upon expiry of which the sight will automatically shut down.
Select Offif you wish to desactive Auto shutdown.
= Confirm your selection with a short press of the M button.
Photo mode. Photography
TRAIL thermal sights feature video recording and photography of the
image being ranged to the internal memory card.
Before using this feature please read the menu options “Date setup”,
“Time setup” of the section “Main menu functions”.
The built-in recorder operates in two modes - VIDEO and PHOTO
VIDEO mode. Video recording
The device in the VIDEO mode upon turning on.
In the top left corner you will see icon and remaining recording
time in the format HH:MM (hours: minutes) 5:12.
Upon start of video recording icon disappears, and icon REC and
recording timer in the format MM:SS (minutes : seconds) appear
instead:
Stop recording video with a long press of the REC button.
Video files are saved to the memory card after stopping video.
Start video recording with a short press of the REC (7) button.
Pause and resume recording video with a short press of the REC
button.
Switch between modes (Video-> Photo-> Video) with a long press of
the REC button.
REC 00:25
- counter for multimedia files cannot be reset;
Attention!
Notes:
- recorded videos and photos are saved to the built-in memory card in
the format img_xxx.jpg (photos); video_xxx.avi (videos). xxx
three-digit counter for videos and photos;
- Maximum duration of a recorded file is seven minutes. After
this time expires a video is recorded into a new file. The number
of recorded files is limited by the capacity of unit's internal
memory.
- you can enter and operate the menu during video recording;
- regularly check the free capacity of the internal memory, move
recorded footage to other storage media to free up space on the
internal memory card;
Take a picture with a short press of the REC button. The image
freezes for 0.5 sec and a photo is saved to the internal memory.
“>100” means that you can take more than 100 pictures. If the number
of available pictures is less than 100, actual amount of available
pictures (for example 98) is shown next to the icon .
Switch to the Photo mode with a long press of the REC button.
in the top left corner of the display you can see: photography icon ,
M (4)
VLC Video Player ELMEDIA Video Player
FUNCTION DISPLAY OFF
The DISPLAY OFF function deactivates transmission of image to the
display by minimizing its brightness. This prevents accidental disclosure.
The device keeps running.
When holding down the ON button, the display shows “Display off”
message with countdown, the device will turn off.
When the device is on, hold down the ON (1) button. Display goes out,
message “Display off”.
To activate the display, press briefly the ON button.
The main image is shown with optical magnification ratio which
corresponds to ratio x1.0.
When PiP is turned on, you can operate the discrete and continuous
digital zoom. The full optical magnification will take place only in the
dedicated window.
When PiP is turned off, the image is shown with the optical
magnification set for the PiP function.
6.9x
3.1x
PiP (“Picture in Picture”) allows you to see
a zoomed image simultaneously with the
main image in a dedicated window.
Turn on/off the PiP function with a long press of the DOWN (8) button.
Change zoom ratio in the PiP window with a short press of the DOWN
button.
The zoomed image is displayed in a dedicated window, with the full
optical magnification being shown.
www.pulsar-vision.com
www.pulsar-vision.com
Connect one end of the USB cable to the Micro-USB (10) port of your
sight, and the other end to the USB port of your PC/laptop.
Turn the sight on with a short press of the ON (11) button (device that
has been turned off cannot be detected by your computer).
Your device will be detected by the computer automatically; no drivers
need to be installed.
Two connection modes will appear
on the display:
Memory card (external memory)
and Power.
Select connection mode with UP
and DOWN buttons.
Confirm selection with a short press of the M button.
USB connection
Use as power
Use as memory card
Connection modes:
- If video recording was in progress when connection was made,
recording stops and video is saved.
Memory card (external memory). In this mode the device is
detected by the computer as a flash card. This mode is designed for
work with the files saved in device's memory. The device's functions
are not available in this mode; the device turns off automatically.
When USB is disconnected from the device where connection is in
the USB Mass storage device mode, the device remains on the OFF
state. Turn the device ON for further operation.
Power.
In this mode PC/laptop is used as an external power supply. The
status bar shows icon . The device continues operating and all
functions are available.
Note: The Battery pack installed in the device is not being charged!
When USB is disconnected from the device when in the Power mode,
the device keeps operating with Battery Pack, if available, and it has
sufficient charge.
Attention! The display of a thermal imager may have 1-2 pixels represented as
bright white or black dots which cannot be deleted and are not a defect.
The defective pixels on the sensor may proportionally increase in size when
digital zoom is activated.
The term of possible repair of the device is five years.
The term of possible repair of the device is five years.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94

Pulsar Trail Le manuel du propriétaire

Taper
Le manuel du propriétaire