Olympus CAMEDIA C-120 Manuel utilisateur

C-120

D-380

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

basic_e.fm Page 1 Tuesday, February 5, 2002 2:48 PM

2 En

En

CONTENTS/TABLE DES MATIÈRES/INHALT/CONTENIDO/

ENGLISH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

FRANÇAIS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

DEUTSCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138

CONTENTS

GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

MENU FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

SHOOTING BASICS . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

SELECTING THE IMAGE QUALITY (RECORD MODE) 21

PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

PRINT SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

DOWNLOADING PICTURES TO A COMPUTER . . . . . 29

OPTIONAL ACCESSORIES . . . . . . . . . . . . . . . . . . . . . 31

ERROR CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

These instructions are only for quick reference. For more details

on the functions described here, refer to the “Reference Manual”

on CD-ROM.

basic_e.fm Page 2 Tuesday, February 5, 2002 2:48 PM

En 3

En

For customers in Europe

For customers in North and South America

For customers in USA

Declaration of Conformity

Model Number : C-120/D-380

Trade Name : OLYMPUS

Responsible Party : Olympus America Inc.

Address : 2 Corporate Center Drive, Melville, New York

11747-3157 U.S.A.

Telephone Number : 631-844-5000

Tested To Comply With FCC Standards

FOR HOME OR OFFICE USE

This device complies with Part 15 of the FCC rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference

that may cause undesired operation.

For customers in Canada

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Trademarks

• IBM is a registered trademark of International Business Machines Corporation.

• Microsoft and Windows are registered trademarks of Microsoft Corporation.

• Macintosh is a trademark of Apple Computer Inc.

• All other company and product names are registered trademarks and/or

trademarks of their respective owners.

• The standards for camera file systems referred to in this manual are the “Design

Rule for Camera File System/DCF” standards stipulated by the Japan Electronics

and Information Technology Industries Association (JEITA).

“CE” mark indicates that this product complies with the European

requirements for safety, health, environment and customer

protection. “CE” mark cameras are intended for sales in Europe.

basic_e.fm Page 3 Tuesday, February 5, 2002 2:48 PM

4 En

En

GETTING STARTED

J NAMES OF PARTS

Lens barrier

Turns the camera on

and off in the shooting

mode.

Shutter button

Flash

Lens

Self-timer lamp

Connector cover

DC-IN jack

USB

connector

Macro lever

(Monitor) button

Turns the camera on and off in the playback mode.

Card cover

Strap eyelet

Monitor

Arrow pad

Battery

compartment

cover

Tripod

socket

Green lamp

Target mark

Viewfinder

(OK/Menu) button

basic_e.fm Page 4 Tuesday, February 5, 2002 2:48 PM

En 5

En

J MONITOR INDICATIONS

Item Indication

1

Battery check ,

2

Flash , , , ,

3

Spot metering

4

Memory gauge

5

Internal memory

6

Exposure compensation -2.0, -1.5, -1.0, -0.5, +0.5, +1.0, +1.5, +2.0

7

Self-timer/Drive , ,

8

White balance WB AUTO, , , ,

9

Record mode SHQ, HQ, SQ1, SQ2

10

Number of storable still

pictures/Seconds remaining

16/16"

11

Number of pixels

1600

×

1208, 1600

×

1200, 1024

×

768, 640

×

480

12

Date and time '02.01.12 12:30

13

File number, Frame number/

Playing time

100-0016, 16/16"

14

Print reservation, Number of prints

× 2

15

Protect

• The indicator is displayed when you are storing pictures in the camera’s

internal memory. It does not appear when you insert a card.

• You can view shooting information details of the recorded picture in the

playback mode.

1

2

Playback mode

3

4

5

6

7

8

9

10

14

12

13

1

9

11

6

15

8

Shooting mode

basic_e.fm Page 5 Tuesday, February 5, 2002 2:48 PM

6 En

En

Memory gauge

The memory gauge lights up when you take a picture. While the gauge is lit,

the camera is storing the picture on the card. The memory gauge indication

changes as shown below depending on the shooting status. When the

memory gauge is full, wait a few moments before taking the next shot.

When taking still pictures

When recording movies

Battery check

If the remaining battery power is low, the battery check indication on the

monitor changes as follows while the camera is turned on.

Before

shooting

(Gauge is

off)

No more pictures

can be taken

(Fully Lit)

One picture

taken

(Lit)

More than

two taken

(Lit)

Shoot Shoot Shoot

Wait

Before shooting

(Gauge is off)

During shooting (Lit)

• Shooting is not possible until the lit area goes off completely.

• Movie recording ends automatically when the memory gauge

is full.

Shoot

Wait

If you continue shooting

Lights up (Green) Blinks (Red)

Remaining power

level: high

Remaining power level: low

Replace with a new battery.

Green lamp on the right of

the viewfinder blinks

Remaining power level:

exhausted

Replace with a new battery.

No indication

basic_e.fm Page 6 Tuesday, February 5, 2002 2:48 PM

En 7

En

J ATTACHING THE STRAP

1

Thread the short end of the strap through

the strap eyelet.

2

Thread the long end of the strap through

the loop that has already gone through the

eyelet.

3

Pull the strap tight, making sure that it is

securely fastened and will not come loose.

J LOADING THE BATTERIES

1

Make sure that:

• The monitor is off.

• The lens barrier is closed.

• The green lamp is off.

2

Slide the battery compartment cover

in the direction of (the direction

indicated by the mark on the

cover), and lift it up in the direction

of .

3

Insert the batteries, making sure that

they are correctly oriented as shown

in the illustration.

4

Close the battery compartment

cover in the direction of . While

pressing the mark, slide

the cover in the direction of .

If the battery compartment cover will not

close easily, do not force it. Try pressing

[OPEN] and the mark with both

hands.

Battery insertion

direction mark

When using

lithium battery

packs

When using

AA (R6)

batteries

basic_e.fm Page 7 Tuesday, February 5, 2002 2:48 PM

8 En

En

AA (R6) alkaline batteries

When you need batteries in a hurry, you can use AA (R6) alkaline batteries,

which are easy to get anywhere. However, the number of pictures that you

can store in the camera may vary considerably with AA batteries, depending

on the battery manufacturer, camera shooting conditions, etc. Use this type

of battery only when you have no other choices available. Turn off the monitor

whenever possible to save power.

J

INSERTING THE CARD (SmartMedia)

The card is convenient, for example, when you are traveling and you want to

take a lot of pictures. When the card is inserted, the pictures you have taken

are stored on the card. When no card is inserted, the pictures are stored in

the camera’s internal memory.

1

Make sure that:

• The monitor is off.

• The lens barrier is closed.

• The green lamp is off.

2

Open the card cover.

3

Insert the card as far as it will

go in the direction shown in

the illustration.

There is an arrow inside the card

cover, indicating the direction in

which the card should be inserted.

4

Close the card cover securely

until it clicks.

Card insertion

direction mark

basic_e.fm Page 8 Tuesday, February 5, 2002 2:48 PM

En 9

En

J TURNING THE POWER ON/OFF

When shooting pictures

Power on: Open the lens barrier.

The camera turns on in the shooting mode.

Power off: Close the lens barrier.

The camera turns off.

When playing back pictures on the camera

Power on: Press the (monitor) button with the lens barrier closed.

The camera turns on in the playback mode (the monitor turns

on).

Power off: Press the (monitor) button.

The camera turns off (the monitor turns off).

If you open the lens barrier without the card inside the camera, NO CARD

appears on the monitor. In this case, you can record pictures in the camera's

internal memory.

Power on Power off

With the lens

barrier closed

basic_e.fm Page 9 Tuesday, February 5, 2002 2:48 PM

10 En

En

J SETTING THE DATE AND TIME

1

Open the lens barrier.

2

Press .

The shooting mode top menu is displayed.

3

Press on the arrow pad to select MODE MENU.

4

Press to select the SETUP tab, then press .

5

Press to select , then press .

6

Press to select one of the following date formats:

Y-M-D

(Year/Month/Day)

M-D-Y

(Month/Day/Year)

D-M-Y

(Day/Month/Year)

Then press .

The cursor moves to the next setting field.

7

Press to set the first field, then press to move to

the next field.

Press to move back to the previous setting field.

8

Repeat the above steps until the date and time are completely

set.

9

Press .

For a more accurate setting, press when the clock hits 00 seconds.

The clock starts when you press .

10

Close the lens barrier.

The camera turns off.

If the camera is left for about 1 hour with the batteries removed, or if the

battery power is exhausted, the date and time settings may be canceled or

become incorrect. Before taking important pictures, check that the date and

time settings are correct.

basic_e.fm Page 10 Tuesday, February 5, 2002 2:48 PM

En 11

En

MENU FUNCTIONS

J USING THE MENUS AND TABS

When you turn on the camera and press the (OK/Menu) button, the top

menu is displayed on the monitor. The functions of this camera are set from

the menus. This chapter explains how the menus work, using the shooting

mode screens.

Shortcut Menus

• Let you quickly access the most

frequently used menu settings.

• Display operational buttons at

the bottom of the screen, and let

you select items by pressing

.

Select each menu using

the arrow pad.

Press .

The top menu is displayed.

Mode Menu

• Lets you access the menu

selections to set the metering,

white balance, etc.

• Categorizes the settings into 4

tabs.

• Displays the CAMERA,

PICTURE, CARD and SETUP

tabs. Select the desired tab on

the left of the screen by pressing

.

Tabs

basic_e.fm Page 11 Tuesday, February 5, 2002 2:48 PM

12 En

En

How to use the menus

1

Press to display the

top menu, then press .

2

Press to select

a tab, then press

to

display the menu.

Top menu CAMERA tab

PICTURE tab

CARD tab

SETUP tab

To return

to select a

tab, press

.

basic_e.fm Page 12 Tuesday, February 5, 2002 2:48 PM

En 13

En

• Not all items can be selected depending on the status of the camera and the

setting performed. For example, when the movie mode is selected, you

cannot select SEPIA, BLACK&WHITE or in the EDIT tab category.

• By pressing the shutter button to take a picture while the menu is displayed,

you can take pictures with the currently selected settings.

• If you want to save the settings after the camera is turned off, set All Reset

to OFF.

3

Press to select the

desired item, then press

to display the available

setting selections.

4

Press to

select the setting.

Setting is completed

when the setting has

been changed.

The green frame moves

to the selected item.

To close the menu,

press twice.

or

To return to

select an item,

press or .

basic_e.fm Page 13 Tuesday, February 5, 2002 2:48 PM

14 En

En

Shortcut menus

Shooting mode

DRIVE

FUNCTION

Playback mode

MOVIE PLAYBACK

INFO

ERASE

Lets you shoot one frame at a time (normal shooting).

Lets you shoot pictures in succession.

Lets you shoot movies.

Lets you select the resolution and the quality of the image.

Still picture : SHQ, HQ, SQ1, SQ2

Movie : HQ, SQ

2 IN 1

Lets you combine two still pictures taken in succession

into one picture.

Self-Portrait mode:

Lets you take a picture of yourself while holding the camera.

PANORAMA

Allows panorama pictures to be taken with Olympus

CAMEDIA-brand SmartMedia cards.

Displays all recorded pictures in slide-show fashion.

Plays back a movie.

Displays all the shooting information on the monitor.

Erases a selected picture.

basic_e.fm Page 14 Tuesday, February 5, 2002 2:48 PM

En 15

En

Mode menus

Mode menu functions are categorized into 4 tabs. Use to select a

tab and display the respective functions.

These instructions are only for quick reference. For more details on

the functions described here, refer to the “Reference Manual” on

CD-ROM.

Shooting mode

If you display the mode menu without the card inside the camera, a MEMORY

tab will be displayed instead of the CARD tab.

CAMERA tab

Adjusts the brightness of the image (Exposure

compensation).

METERING

Selects the area of the image that will be used to determine

exposure or image brightness from the two available

settings: ESP or (spot metering).

PICTURE tab

WB

Sets the appropriate white balance according to the light

source.

CARD tab

CARD SETUP Formats a card.

SETUP tab

ALL RESET

Selects whether to save the current camera settings when

you turn off the power.

Turns the beep sound (used for warnings, etc.) on and off.

REC VIEW

Selects whether to display pictures on the monitor while

saving them.

Adjusts the brightness of the monitor.

Sets the date and time.

CAMERA tab

PICTURE tab

CARD tab

SETUP tab

basic_e.fm Page 15 Tuesday, February 5, 2002 2:48 PM

16 En

En

Playback mode

PLAY tab

Protects pictures from accidental erasure.

Rotates pictures 90 degrees clockwise or counter-

clockwise.

Stores printing information on the card required for DPOF

printers.

EDIT tab

BLACK & WHITE Creates black and white pictures.

SEPIA Creates sepia-toned pictures.

Makes the file size smaller.

INDEX Creates an index picture of a movie in 9 frames.

CARD tab

CARD SETUP

Formats a card.

Erases all image data stored on the card.

BACKUP Copies images stored in the internal memory to the card.

SETUP tab

ALL RESET

Selects whether to save the current camera settings when

you turn off the power.

Turns the beep sound (used for warnings, etc.) on and off.

Selects the number of frames in the index display.

Adjusts the brightness of the monitor.

Sets the date and time.

PLAY tab

EDIT tab

CARD tab

SETUP tab

basic_e.fm Page 16 Tuesday, February 5, 2002 2:48 PM

En 17

En

SHOOTING BASICS

J TAKING STILL PICTURES

You can take still pictures using either the viewfinder or the monitor. Both

methods are easy as all you have to do is to press the shutter button. The

recorded picture will be stored on the card if you have inserted one, or in the

internal memory if you have not inserted a card.

Taking still pictures using the viewfinder

1

Open the lens barrier.

Slide the lens barrier open until it clicks.

2

Position the target mark over the subject in the viewfinder.

When the distance from the camera to the subject is less than 60 cm/

2 ft, select the macro mode.

3

Press the shutter button gently (halfway).

The green lamp on the right of the viewfinder lights up.

The exposure is locked as long as the shutter button is kept pressed

halfway.

4

Press the shutter button all the way (fully).

The camera takes the picture.

Taking still pictures using the monitor

1

Open the lens barrier.

2

Press .

The monitor turns on.

3

Determine the image composition while observing your

subject on the monitor.

4

Take the picture by following the same procedure as for

shooting using the viewfinder.

Press the shutter button all the way (fully) to take the picture.

When you want to take pictures with the monitor off, press again.

Never open the card cover, remove the batteries or disconnect the AC adapter

while the green lamp is blinking. Doing so could destroy stored pictures and

prevent storage of pictures you have just taken.

basic_e.fm Page 17 Tuesday, February 5, 2002 2:48 PM

18 En

En

J RECORDING MOVIES

You can record movies with this camera. Recorded movies can be played

back or stored separately as still pictures using the index function.

1

Display the top menu in the shooting mode.

• Open the lens barrier.

• Press .

2

Press to select DRIVE.

3

Press to select , then press .

Movie recording is set and the menu is closed.

The total recordable time and the

mark are displayed on the

monitor.

4

Record the movie while observing your subject on the

monitor.

Press the shutter button fully to start recording and the number of

seconds remaining for one record is displayed. Press the shutter button

fully again to stop recording.

To cancel movie mode

Press .

The monitor turns off and the movie mode is canceled.

J USING THE FLASH

1

Open the lens barrier.

The camera turns on in the shooting mode.

2

Press .

The current flash setting is displayed.

3

Press while the current flash setting is displayed.

Each time you press , the flash mode is switched in the following

sequence: AUTO - - - - - .

4

Take the picture.

• During movie recording, the flash is disabled.

• It takes longer to store movies than still pictures.

• The seconds remaining varies depending on the record mode, whether the

movie is stored on the card or in the internal memory, and the amount of

space available on the card or in the internal memory.

• You cannot record movies with sound.

basic_e.fm Page 18 Tuesday, February 5, 2002 2:48 PM

En 19

En

Auto-flash (No indication)

The flash fires automatically in low light or backlight conditions.

Red-eye reduction flash ( )

The red-eye reduction flash mode reduces this phenomenon by emitting pre-

flashes before firing the regular flash.

Fill-in flash ( )

The flash always fires every time the shutter button is released.

Flash off ( )

The flash does not fire even in low light conditions.

Night scene ( )

Use this mode when shooting a subject against a night background.

Night scene with red-eye reduction ( )

Use this mode when shooting a portrait against a night background to reduce

the red-eye phenomenon.

J

ZOOMING IN ON A SUBJECT (DIGITAL ZOOM)

The maximum possible magnification is 5x.

1

Open the lens barrier.

The camera turns on in the shooting mode.

2

Press .

The monitor turns on automatically.

3

Press while observing your subject on the monitor.

4

Take the picture while observing your subject on the monitor.

The flash working range is approximately 2.5 m/8.2 ft.

Record mode and zoom magnification

When the record mode is set to SHQ, HQ or SQ1: 1x - 2.5x

When the record mode is set to SQ2: 1x - 5x

Pictures taken with the digital zoom may appear grainy.

basic_e.fm Page 19 Tuesday, February 5, 2002 2:48 PM

20 En

En

J

TAKING CLOSE-UP PICTURES (MACRO MODE)

The macro mode allows you to shoot a subject at a distance of 25 - 60 cm/0.8

- 2 ft. You can also use the macro mode to shoot a subject at a distance of

more than 60 cm/2 ft. This camera uses a smaller lens aperture in this mode,

making it useful for taking pictures in bright surroundings, such as snow-

covered mountains in bright sunshine.

1

Open the lens barrier.

The camera turns on in the shooting mode.

2

Slide the macro lever on the front of the camera toward .

To cancel the macro mode, slide the lever back to its original position.

3

Press .

The monitor turns on.

4

Take the picture while observing your subject on the monitor.

J USING THE SELF-TIMER

This function is useful for taking pictures with yourself included in the

photograph. Fix the camera securely on a tripod for self-timer shooting.

1

Open the lens barrier.

The camera turns on in the shooting mode.

2

Press .

The monitor turns on and the current self-timer setting is displayed.

3

Press while the current self-timer setting is displayed.

The setting changes between ON and OFF each time

is

pressed.

4

Press the shutter button fully.

The self-timer lamp lights up for approximately 10 seconds, then starts

blinking. After blinking for 2 seconds with beep sound, the picture is

taken.

basic_e.fm Page 20 Tuesday, February 5, 2002 2:48 PM

La page charge ...

Olympus CAMEDIA C-120 Manuel utilisateur

Olympus CAMEDIA C-120 Manuel utilisateur

dans d''autres langues

Documents connexes