Amazfit A2013 Manuel utilisateur

Marque: Amazfit

Modèle: A2013

Taper: Manuel utilisateur

Amazﬁt T-Rex Pro

Product Manual

A2013

01 Package Contents

Smartwatch with

band × 1

Charging base × 1

1

Instruction Manual × 1

02 About the Watch

2

Note: Press and hold the power button to turn on the watch. If the watch cannot be

turned on, please charge it and then try again.

Heart rate

sensor

Charging

plates

Power/Select button

Touch screen

Upper

button

Lower

button

Back button

03 Pairing the Watch

3

1.

2.

3.

4.

Scan the QR code on the Instruction Manual with your mobile phone to download the

app to your mobile phone. You can also download the latest version of app from the

Google Play Store or Apple App Store.

Open the app, register an account and log in.

Follow the steps in the app to pair your watch correctly.

Once pairing is complete, the watch will display the

correct time.

You can set the other watch functions as needed.

Download Zepp App

4

Note:

1.

2.

3.

For a better user experience, please use the most recent version of the app.

The operating system needs to be Android 5.0, iOS 10.0, or above.

Do not pair the watch directly using your mobile phone’s Bluetooth. Follow the

steps in the app to pair your watch correctly.

04 Charging the Watch

5

Note:

1.

2.

Please use the charging base that comes with the watch.

Make sure that the charging base is dry before charging.

Please use a 1A or above power adapter.

1.

2.

3.

Connect the watch's charging cable to a power adapter or a computer's USB port.

Put the watch into the charging base. Pay attention to the direction and position of

the watch, and make sure that the metal contacts on the back of the watch ﬁt

closely with the charging base.

When charging starts, the watch screen displays the

charging progress.

05 Disassembly and Assembly of the Watch Strap

6

If you need to install or remove the strap, hold the screw on one side with a

screwdriver, and rotate the nut on the other side, as shown in the ﬁgure below.

Note:

Once the strap is assembled, pull the strap properly to ensure it is installed successfully.

06 Wearing the Watch

7

1.

2.

3.

Wear the watch strap not too tightly or too loosely, and leave enough space for

the skin to breathe. This makes you feel comfortable and allows the sensor to

function.

When measuring blood oxygen saturation, wear the watch correctly. Avoid

wearing the watch on the wrist joint, keep your arm ﬂat, maintain comfortable

(appropriately tight) ﬁtting between the watch and the skin of your wrist, and

keep your arm still throughout the measurement process. When aected by

external factors (arm sag, arm sway, arm hair, tattoo, etc.), the measurement

result may be inaccurate or the measurement may fail and provide no output.

We recommend that you tighten the watch strap during exercise and loosen it

afterwards.

07 Basic Parameters

8

Product model: A2013

Input: 5V d.c. 500mA MAX

Bluetooth version: BLE V5.0

BLE output power: <5 dBm

View product certiﬁcation information on the watch's Settings > System > Regulation page.

Device requirements: Devices installed with Android 5.0 or iOS 10.0 or above OS versions

Operating temperature: 0°C to 45°C

Water resistance rating: 10 ATM

Bluetooth frequency: 2400–2483.5 MHz

The Bluetooth® word mark and logos are registered trademarks

owned by Bluetooth SIG, Inc. and any use of such marks by Anhui

Huami Information Technology Co., Ltd. is under license. Other

trademarks and trade names are those of their respective owners.

08 Regulatory Notice

9

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that

may cause undesired operation.

FCC ID: 2AC8UA2013

Any changes or modiﬁcations that are not expressly approved by the party

responsible for the compliance may void the user’s authority to operate the device.

10

Note: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

11

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit dierent from that to which

thereceiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The

device can be used in portable exposure condition without restriction.

IS 13252(Part 1)/

IEC 60950-1

R-41136905

www.bis.gov.in HIDF19000259

12

This device contains licence-exempt transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development Canada’s licence-exempt

RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may

cause undesired operation of the device.

IC: 21806-A2013 CAN ICES-3(B)/NMB-3(B)

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux

appareils radioexempts de licence. L'exploitation est autorisée aux deux

conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d'en compromettre le fonctionnement.

13

Under Industry Canada regulations, this radio transmitter may only operate using an

antenna of a type and maximum (or lesser) gain approved for the transmitter by

Industry Canada. To reduce potential radio interference to other users, the antenna

type and its gain should be so chosen that the equivalent isotropically radiated

power (e.i.r.p.) is not more than that necessary for successful communication.

Conformément à la réglementation d'Industrie Canada, le présent émetteur

radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou

inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de

réduire les risques de brouillage radioélectrique à l'intention des autres

utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance

isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à

l'établissement d'une communication satisfaisante.

09 Disposal and Recycling Information

14

All products bearing this symbol are waste electrical and electronic

equipment (WEEE as in directive 2012/19/EU) which should not be mixed

with unsorted household waste. Instead, you should protect human

health and the environment by handing over your waste equipment to a

designated collection point for the recycling of waste electrical and

electronic equipment, appointed by the government or local authorities.

Correct disposal and recycling will help prevent potential negative

consequences to the environment and human health. Please contact the

installer or local authorities for more information about the location as

well as terms and conditions of such collection points.

15

10 Certiﬁcations and Safety Approvals

Hereby, Anhui Huami Information Technology Co., Ltd. declares that the

radio device type A2013 is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the

following internet address: https://support.amazﬁt.com/en

For more regulatory information and product certiﬁcation/compliance

logos related to Amazﬁt T-Rex Pro, please go to Regulatory on your

Amazﬁt T-Rex Pro.

16

11 Battery Safety

1.

2.

3.

4

This device is equipped with a built-in battery that cannot be removed or

replaced. Do not disassemble or modify the battery by yourself.

Disposal of a battery into ﬁre or a hot oven, or mechanically crushing or

cutting of a battery can result in an explosion.

Leaving a battery in an extremely high temperature surrounding environment

can result in an explosion or the leakage of ﬂammable liquid or gas.

A battery subjected to extremely low air pressure may result in an explosion or

the leakage of ﬂammable liquid or gas.

17

12 Safety Notice

1.

2.

3.

4.

Do not allow children or pets to bite or swallow the product or its accessories, as

this may cause injury.

Do not place this product under excessively high or low temperatures, which

may cause the product to catch ﬁre or explode.

Do not place this product near heat sources or open ﬂame, such as ovens and

electric heaters.

Some people may experience allergic skin reactions to plastics, leathers, ﬁbers,

and other materials, and symptoms such as redness, swelling, and inﬂammation

will occur after long-term contact with this product's components. If you

experience such symptoms, please discontinue use and consult your doctor.

18

5.

6.

7.

Do not use unauthorized or incompatible power adapters, chargers, or data

cables, which may damage the watch and accessories, or cause ﬁre, explosion,

or other hazards.

The radio waves generated by this product may aect the normal operation of

implanted medical devices or personal medical devices, such as pacemakers

and hearing aids. If you use any such medical devices, consult the manufacturer

for relevant usage restrictions.

Do not dispose of this device or its accessories as ordinary household waste.

Please make sure you dispose of or recycle this device and its accessories in

accordance with local laws and regulations.

19

13 Repair and Maintenance

1.

2.

3.

4.

5.

Avoid using detergents such as soap, hand sanitizer, bath foam, or lotion for

cleaning to prevent chemical residues from irritating the skin, corroding the

device, or degrading the water resistance of the device.

After wearing the device while bathing (for devices that support bathing),

swimming (for devices that support swimming), or sweating, please promptly

clean and dry the device.

The leather strap is not waterproof. Avoid getting the strap wet, as this may shorten

its service life.

When using light-colored watch straps, avoid contact with dark clothing to

prevent staining.

Do not place the device in direct sunlight for long periods. Excessively high or low

ambient temperature may cause device failure.

La page charge ...

La page charge ...

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22

Amazfit A2013 Manuel utilisateur

Marque: Amazfit

Modèle: A2013

Taper: Manuel utilisateur

Télécharger le PDF

dans d''autres langues

English: Amazfit A2013 User manual

Documents connexes

Autres documents