Mi A2005 Amazfit band Manuel utilisateur

A2005 Amazfit band
Mi
Marque
Mi
Modèle
A2005 Amazfit band
Taper
Manuel utilisateur
Amazfit band User Manual
Read this manual carefully before use, and retain it for future reference.
Product Overview
Product Overview
Installation
1. Insert one end of the fifitness tracker into the slot from the front of the
wristband.
2. Press down on the other end with your thumb to push the fifitness tracker
completely into the slot.
Wearing
1. Comfortably tighten the band around your wrist, about 1 fifinger width away
from your wrist bone.
2. To achieve the optimal performance of the heart rate sensor, make sure
its back to contact with your skin. When wearing your wristband, keep it
neither too tight nor too loose but leaving some space for the skin to be
able to breathe. Tighten the wristband before you start to exercise and
properly loosen it afterward.
Connecting
1. The Amazfit band can be connected to the Amazfit app. Scan the QR code
below, or search for Amazfit in Google Play or Apple's App Store to
download and install the Amazfit app.
2. Log into your Amazfit account in the Amazfit app, and follow the instructions
to connect and pair the band with your phone. Once the band vibrates and a
pairing request is displayed on its screen, tap the touch button to complete the
pairing with your phone.
Note: Make sure the Bluetooth on your phone is enabled. Hold the phone
and the band close to each other during pairing.
Usage
After successfully pairing with your device, the band will start tracking and
analyzing your daily activities and sleeping habits.
Touch the button to light up the screen. Swipe up or down to view various
functions such as PAI (Personal Activity Intelligence), exercise data, and
heart rate measurements. Swipe right to return to the previous page.
Disassembly
Remove the band from your wrist, hold on to each end and pull on the
wristband until you see a small gap between the fitness tracker and the
wristband. Use your finger to pop the fitness tracker out of its slot from the
front side of the wristband.
Charging
Recharge your band immediately when the battery level is low.
Precautions
When using the band to measure your heart rate, please keep your wrist still.
The Amazfit band has a water resistance rating of 5 ATM. It can be worn
in the shower, swimming pool, or while swimming near the shore. It cannot
be used, however, in a sauna or while scuba diving.
The function of the touch button and touchscreen are not accessible during
underwater. When your band comes in contact with water, use a soft cloth
to wipe away excess water from its surface before using it.
During daily use, avoid wearing the band too tightly and try to keep its
contact area dry. Please clean the wristband regularly with water.
Please stop using the product immediately and seek medical assistance if
the contact area on your skin shows signs of redness or swelling.
Specifications
Name: Amazfit band
Model: A2005
Net Weight: 11.9 g
Fitness Tracker Dimensions: 46.95 × 18.15 × 12.45 mm
Wristband Material: Thermoplastic elastomer (TPE)
Clasp Material: AluAmazfitnum alloy
Adjustable Length: 155–219 mm
Compatible with: Android 5.0 & iOS 10.0 or above
Baery Capacity: 125 mAh
Baery Type: Lithium polymer baery
Input voltage: DC 5.0 V
Input Current: 250 mA Max.
IP Rating: 5 ATM
Bluetooth Frequency: 2402–2480 MHz
Operating Temperature: -10°C to 50°C
Wireless Connectivity: Bluetooth 5.0 BLE
Disposal and Recycling Information
All products bearing this symbol are waste electrical and
electronic equipment (WEEE as in directive 2012/19/EU) which
should not be mixed with unsorted household waste. Instead, you
should protect human health and the environment by handing
over your waste equipment to a designated collection point for
the recycling of waste electrical and electronic equipment,
appointed by the government or local authorities. Correct
disposal and recycling will help prevent potential negative
consequences to the environment and human health. Please
contact the installer or local authorities for more information
about the location as well as terms and conditions of such
collection points.
Certifications and Safety Approvals
Hereby, Shenzhen Yecon Industry Co. Ltd., declares that the radio
equipment type A2005 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address:
hp://www.mi.com/global/service/support/declaration.html
For regulatory information, product certification, and compliance logos
related to the Amazfit band, please go to More > Settings > Regulatory.
Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user's authority to operate
the equipment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-
exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that
may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil
est conforme aux CNR d’Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
1) L’appareil ne doit pas produire de brouillage;
2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Manufactured by: Anhui Huami Information Technology Co., Ltd.
Address: Room 1201, Building A4, National Animation Industry Base, No.
800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China
2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Manufactured by: Anhui Huami Information Technology Co., Ltd.
Address: Room 1201, Building A4, National Animation Industry Base, No.
800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Mi A2005 Amazfit band Manuel utilisateur

A2005 Amazfit band
Mi
Marque
Mi
Modèle
A2005 Amazfit band
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Autres documents