Apple 1Z034-4954-A Manuel utilisateur

Apple Wireless

Keyboard

English

3

1

Using Your Apple

Wireless Keyboard

Your keyboard comes with two AA alkaline batteries installed

and uses Bluetooth® technology to connect to your Mac.

This guide shows you how to set up your keyboard, customize and use the keys, and

change the batteries. To learn about:

Â

Updating software, see page 4.

Â

Setting up your keyboard with a new Mac, see page 5.

Â

Replacing your USB keyboard with an Apple Wireless Keyboard, see page 5.

Â

Pairing your keyboard with a different Mac, see page 6.

Â

Replacing the batteries, see page 8.

About the Indicator Light

The LED on your Apple Wireless Keyboard functions as a battery indicator and a status

light. When you first turn on your keyboard, the light glows steadily for 5 seconds,

indicating the batteries are good. After 5 seconds, if your keyboard isn’t paired with

your Mac, the light begins to blink indicating your keyboard is in discovery mode and

ready to pair with your Mac (pairing means your keyboard and Mac are connected

wirelessly and ready to communicate with each other).

4

English

If you don’t pair your keyboard with your Mac within 3 minutes, the indicator light and

keyboard turn off to preserve battery life. Push and release the On/off (®

) switch to

turn your keyboard on again, allowing you to pair it with your Mac (see page 5).

Once you successfully pair your keyboard with your Mac, the indicator light glows

steadily for 3 seconds, and then turns off. If you push the On/ off (®

) switch and the

light doesn’t illuminate, you may need new or charged batteries.

Updating Your Software

To use your keyboard and its full range of features, update your Mac to Mac OS X

v10.5.8 or later and install the latest keyboard software.

To update to the latest version of Mac OS X, choose Apple (

) > Software Update from

the menu bar, and follow the onscreen instructions. When installation is complete and

you’ve restarted your Mac, use Software Update again to make sure all of the available

updates are installed.

On/off switch

Indicator light

English

5

Setting up a New Wireless Keyboard and a New Mac

Follow the instructions in the user guide that came with your Mac to set it up.

Because you have a wireless keyboard, skip the instructions to connect a USB keyboard.

To pair your wireless keyboard with a new Mac:

1

Press and release the On/off (®

) switch to turn on your keyboard.

2

Turn on your Mac and follow the onscreen instructions in Setup Assistant.

Replacing a USB Keyboard with an Apple Wireless Keyboard

Use your existing USB keyboard and Bluetooth Setup Assistant to pair your

Apple Wireless Keyboard with your Mac.

You can also use these instructions to set up your wireless keyboard with

a portable Mac.

To set up your wireless keyboard:

1

Press and release the On/off (®

) switch to turn on your wireless keyboard.

2

Choose Apple (

) > System Preferences, and then click Keyboard.

3

Click “Set Up Bluetooth Keyboard ...” in the lower-right corner to open Bluetooth

Setup Assistant.

4

Select your wireless keyboard, and then follow the onscreen instructions to pair it

with your Mac.

5

Disconnect the USB keyboard from the USB port.

6

English

Pairing your Keyboard with a Different Mac

After you set up your Apple Wireless Keyboard with a Mac, you can set it up again with

a different Mac. If the other Mac is more than 33 feet (10 meters) away, follow the

instructions on page 5 to pair it.

If the other Mac is within 33 feet (10 meters), you must remove the existing pairing

before pairing with a different Mac.

To remove a pairing:

1

On the Mac the keyboard is currently paired with, choose Apple (

) > System

Preferences, and then click Bluetooth.

2

Select the wireless keyboard on the left side of the Bluetooth preference pane.

3

Click the Delete (D

) button in the lower-left corner.

To pair your keyboard with the other Mac, see “Replacing a USB Keyboard with an

Apple Wireless Keyboard” on page 5.

Using Your Keyboard

Customize your keyboard using Keyboard preferences. You can change the modifier

keys, assign keyboard shortcuts to menu commands in a Mac OS X application or in

the Finder, and more.

To customize your keyboard:

1

Choose Apple (

) > System Preferences.

2

Click Keyboard.

3

Click Keyboard or Keyboard Shortcuts.

English

7

Using the Keys

Use the keys at the top of your keyboard to adjust the brightness of your display, open

Exposé, view Dashboard widgets, control the volume, and more.

Decrease ( ) or increase ( ) the brightness of your display.

Use Exposé to see all of the open windows on your desktop at once.

Open Dashboard to access your widgets. Get information about the weather,

stocks, and more.

Rewind or go to the previous song, movie, or slideshow.

’

Play or pause songs, movies, or slideshows.

Fast-forward or go to the next song, movie, or slideshow.

—

Mute the sound coming from the speakers or headphone port on your Mac.

–-

Decrease (–

) or increase (-

) the volume of sound coming from the speakers or

headphone port on your Mac.

C

Press and hold the Media Eject key to eject a disc.

8

English

Renaming Your Keyboard

Your Mac automatically gives your wireless keyboard a unique name the first time you

pair it. You can rename your keyboard in Bluetooth preferences.

To rename your keyboard:

1

Choose Apple (

) > System Preferences and click Bluetooth.

2

Click the Action ( ) pop-up menu in the lower-left corner, and choose Rename.

3

Enter a name for your keyboard and click OK.

Replacing the Batteries

Your Apple Wireless Keyboard comes with two alkaline AA batteries installed. You can

replace them with alkaline, lithium, or rechargeable AA batteries.

Important:

Keep the battery compartment cover and batteries out of the reach of

small children.

To replace the batteries:

1

Press the On/off (®

) switch to turn off your keyboard.

2

Use a coin to remove the battery compartment cover.

Battery compartment cover

English

9

3

Slide two AA batteries into the battery compartment as shown here.

4

Replace the battery compartment cover.

To check the battery status, push the On/off (®

) switch. If the indicator light doesn’t

illuminate, you may need new or charged batteries. You can check the battery level in

Keyboard Preferences. Choose Apple (

) > System Preferences and click Keyboard.

The battery level is in the lower-left corner.

To conserve battery power, turn your keyboard off when you aren’t using it.

Dispose of batteries according to your local environmental laws and guidelines.

WARNING:

When you replace the batteries, replace them all at the same time.

Don’t mix old batteries with new batteries or mix battery types (for example, don’t

mix alkaline and lithium batteries). Don’t open or puncture the batteries, install them

backwards, or expose them to fire, high temperatures, or water. Keep batteries out of

the reach of children.

Insert batteries

10

English

Cleaning Your Keyboard

Follow these guidelines when cleaning the outside of your keyboard:

Â

Remove the batteries from the keyboard.

Â

Use a damp, soft, lint-free cloth to clean the exterior of the keyboard. Avoid getting

moisture in any openings.

Â

Don’t use aerosol sprays, solvents, or abrasives.

Ergonomics

For information about ergonomics, health, and safety, visit the Apple Ergonomics

website at www.apple.com/about/ergonomics.

Support

For support and troubleshooting information, user discussion boards, and the latest

Apple software downloads, go to www.apple.com/support.

Japanese

11

12

Japanese

13

14

Japanese

15

16

Japanese

17

18

Japanese

Français

19

1

Utilisation de votre clavier

Apple Wireless Keyboard

Votre clavier est livré avec deux piles AA alcalines déjà mises

en place, et exploite la technologie Bluetooth® pour se

connecter à votre Mac.

Le présent guide vous explique comment configurer votre clavier, personnaliser et

utiliser les touches, ainsi que changer les piles usagées. Pour en savoir plus sur :

Â

la mise à jour du logiciel, consultez la page 21 ;

Â

la configuration de votre clavier à travers un nouveau Mac, consultez la page 21 ;

Â

le remplacement de votre clavier USB par un Apple Wireless Keyboard, consultez

la page 21 ;

Â

le jumelage de votre clavier et d’un autre Mac, consultez la page 22 ;

Â

le changement des piles, consultez la page 25.

20

Français

À propos de la lampe témoin

La diode électroluminescente située sur votre Apple Wireless Keyboard remplit le rôle

d’indicateur des piles et de voyant d’état. Lorsque vous allumez votre clavier pour la

première fois, la lampe témoin s’allume pendant 5 secondes, indiquant que les piles

sont bonnes. Si votre clavier n’est pas jumelé avec votre Mac après ce délai, la lumière

commence à clignoter pour indiquer que votre périphérique est en mode de détection

et prêt à se jumeler avec votre Mac (le jumelage se rapporte à la connexion sans fil de

votre clavier et de votre Mac afin de pouvoir communiquer entre eux).

Si vous ne jumelez pas votre clavier et votre Mac dans les 3 minutes, la lampe témoin et

le clavier s’éteignent afin de préserver les piles. Appuyez sur le bouton Marche/Arrêt (®

)

pour rallumer votre clavier afin qu’il puisse se jumeler avec votre Mac (reportez-vous à la

page 21).

Après avoir jumelé votre clavier sans fil et votre Mac, la lampe témoin reste allumée

pendant 3 secondes, puis s’éteint. Si vous appuyez sur le bouton Marche/Arrêt (®

) et

que le voyant ne s’allume pas, il se peut que vous deviez changer de piles ou les

recharger.

Bouton

Activé/désactivé

Lumière d’alimentation active

La page charge ...

Apple 1Z034-4954-A Manuel utilisateur

Ce manuel convient également à

Apple 1Z034-4954-A Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents