BN68-01007F-00
LCD TV
LA26R7
LA32R7
LA40R7
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
This device is a Class B digital apparatus.
Register your product at www.samsung.com/global/register
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Samsung Electronics Australia
7 Parkview Drive, Homebush Bay NSW 2127
1300 362 603
www.samsung.com/au
BN68-01007F-00Cover.indd 1BN68-01007F-00Cover.indd 1 2006-03-31 ¿ÀÈÄ 5:40:132006-03-31 ¿ÀÈÄ 5:40:13
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on
the left, right and center of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
• Displaying still images from Video games and PC for longer than a certain period of time may produce partial
after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
Seogu-Still.indd 1Seogu-Still.indd 1 2006-03-31 ¿ÀÈÄ 5:39:302006-03-31 ¿ÀÈÄ 5:39:30
English-1
Contents
Symbol Press Important Note One-Touch
Button
CONNECTING AND PREPARING YOUR TV
List of Parts ..........................................................................2
Installing the Stand ..............................................................2
Installing the Wall Mount Kit ........................................... 2
Viewing the Control Panel....................................................3
Viewing the Connection Panel .............................................4
Viewing the Remote Control ................................................6
Installing Batteries in the Remote Control ...........................6
Switching On and Off ...........................................................7
Placing Your Television in Standby Mode ............................7
Plug & Play ..........................................................................7
SETTING THE CHANNELS
Storing Channels Automatically ...........................................8
Storing Channels Manually ..................................................8
Setting the Channel Manager ..............................................9
Activating the Child Lock ................................................ 10
Sorting the Stored Channels ............................................... 10
Assigning Channels Names ................................................ 11
Fine Tuning Channel Reception ......................................... 11
SETTING THE PICTURE
LNA (Low Noise Amplifier) .................................................. 12
Changing the Picture Standard ........................................... 12
Adjusting the Custom Picture ............................................. 12
Changing the Colour Tone .................................................. 13
Resetting the Picture Settings to the
Factory Defaults .................................................................. 13
Changing the Picture Size .................................................. 13
Freezing the Current Picture ............................................... 13
Digital Noise Reduction ....................................................... 14
DNIe Demo (Digital Natural Image engine) ........................ 14
Viewing the Picture In Picture (PIP).................................... 14
SETTING THE SOUND
Changing the Sound Standard ....................................... 15
Adjusting the Sound Settings ......................................... 15
Connecting Headphones ................................................ 16
Setting the TruSurround XT (SRS TSXT) ....................... 16
Adjusting the Volume Automatically ............................... 16
Selecting the Internal Mute ............................................. 16
Listening to the Sound of the Sub Picture ...................... 17
Resetting the Sound Settings to the
Factory Defaults ............................................................. 17
Selecting the Sound Mode ............................................. 17
SETTING THE TIME
Setting and Displaying the Current Time ........................ 17
Setting the Sleep Timer .................................................. 18
Switching the Television
On and Off Automatically ................................................ 18
SETTING THE OTHERS
Using Game Mode.......................................................... 19
Setting the Blue Screen Mode /
Selecting the Melody ..................................................... 19
Using the Energy Saving Feature .................................. 20
Selecting the Source ...................................................... 20
Editing the Input Source Names..................................... 20
USING THE DTV FEATURE
Previewing the DTV Menu System................................. 21
Updating the Channel List Automatically ........................ 21
Updating the Channel List Manually............................... 22
Editing Your Favourite Channels .................................... 22
Selecting Channel Manager ........................................... 23
Displaying Programme Information ................................ 24
Viewing the EPG (Electronic Programme Guide)
Information ...................................................................... 24
Using the Scheduled List ................................................ 25
Setting the Default Guide ............................................... 25
Viewing All Channels and Favourite Channels .............. 26
Adjusting the Translucency Level ................................... 26
Setting up the Parental Lock .......................................... 27
Setting the Subtitle ......................................................... 27
Selecting the Preferred Language (Subtitle or Audio) .... 28
Setting the Audio Format ................................................ 28
Viewing Product Information ........................................... 28
Checking the Signal Information .................................... 29
Upgrading the Software (Option) .................................... 29
Selecting the Time Zone ................................................. 30
Resetting......................................................................... 30
USING THE TELETEXT FEATURE
Teletext Decoder ............................................................. 31
Displaying the Teletext Information................................. 31
Selecting a Specific Teletext Page ................................. 32
Using Fastext to Select a Teletext Page ........................ 32
SETTING THE PC
Setting the PC ................................................................ 33
Setting up Your PC Software
(Based on Windows XP) ................................................ 34
Display Modes ................................................................ 34
RECOMMENDATIONS FOR USE
Using the Anti-Theft Kensington Lock ............................ 35
Troubleshooting:
Before Contacting Service Personnel ............................ 35
Technical and Environmental Specifications ................. 36
BN68-01007F-00Eng.indd 1BN68-01007F-00Eng.indd 1 2006-03-31 ¿ÀÈÄ 5:40:552006-03-31 ¿ÀÈÄ 5:40:55
English-2
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
M4 X L16
Remote Control &
Batteries (AAA x 2)
Power Cord Cover-Bottom Stand Screw
X4
Stand Cleaning Cloth
Owner’s Instructions
Warranty card
Service Network Card
Safety Guide Registration Cards
Warranty card / Service Network Card / Safety Guide / Registration Cards (Not available in all locations).
The stand and stand screw may not be included depending on the model.
< 2 > < 3 >
1. Place the TV faced down on a soft cloth or cushion on a table.
2. Put the stand into the hole at the bottom of the TV.
3. Insert screw into the hole indicated and tighten.
The stand is installed for models with the screen size of 40 inch and above.
Installing the Stand
Wall mount items (sold separately) allow you to mount the TV
on the wall.
For detailed information on installing the wall mount, see the
instructions provided with the Wall Mount items. Contact a
technician for assistance when installing the wall mounted
bracket.
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the TV
on your own.
Remove the stand and cover the bottom hole with a cap and fasten
with two screws.
Installing the Wall Mount Kit
BN68-01007F-00Eng.indd 2BN68-01007F-00Eng.indd 2 2006-03-31 ¿ÀÈÄ 5:41:182006-03-31 ¿ÀÈÄ 5:41:18
English-3
SOURCE
Toggles between all the available input sources (TV, AV1,
AV2, S-Video, Component1, Component2, PC, HDMI,
DTV). In the on-screen menu, use this button as you use
the ENTER
button on the remote control.
MENU
Press to see an on-screen menu of your TV’s features.
In case of DTV mode, the DTV menu appears.
Press to decrease or increase the volume.
In the on-screen menu, use the buttons
as you use the and buttons on the remote
control.
Press to change channels.
In the on-screen menu, use the
buttons
as you use the and buttons on the remote
control. (Without the Remote Control, You can turn
on the TV by using the Channel buttons.)
Speakers
(
Power)
Press to turn the TV on and off.
Power Indicator
Blinks and turns off when the power is on and lights
up in stand-by mode.
Remote Control Sensor
Aim the remote control towards this spot on the TV.
Viewing the Control Panel
The product colour and shape may vary depending on the model.
26 inch model supports TV, AV1, S-Video, Component1,
Component2, PC, HDMI and DTV only.
BN68-01007F-00Eng.indd 3BN68-01007F-00Eng.indd 3 2006-03-31 ¿ÀÈÄ 5:41:232006-03-31 ¿ÀÈÄ 5:41:23
English-4
Viewing the Connection Panel
Power Input
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
[Side Panel Jacks]
(26 inch model does not
have the side panel jacks.)
[Rear Panel Jacks]
(32 inch/40 inch)
[Rear Panel Jacks]
(26 inch)
BN68-01007F-00Eng.indd 4BN68-01007F-00Eng.indd 4 2006-03-31 ¿ÀÈÄ 5:41:262006-03-31 ¿ÀÈÄ 5:41:26
English-5
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial / A cable television network / A satellite network
Connecting HDMI/DVI
-
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs).
- No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
- “High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple
channels of digital audio (5.1 channels).
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP
(High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the “R - AUDIO - L” terminal on DVI for sound out-
put.
- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that
it has been set to a compatible video output mode as shown in the table below.
Failure to observe this may result in picture distortion, image breakup or no picture.
Supported modes for DVI or HDMI
- Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card.
(This will result in a blank screen being displayed)
Connecting Component Devices (DTV/DVD)
- Connect component video cables (optional) to component connector (“PR”, “PB”, “Y”) on the rear of your set and the other
ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD)
and connect the DTV (or DVD) to component connector (“P
R”, “PB”, “Y”) on your set.
-
The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio
out connectors on the DTV or DVD.
- This LCD TV displays its optimum picture resolution in 720p mode.
- This LCD TV displays its maximum picture resolution in 1080i mode.
Connecting External A/V Devices (AV IN 2)
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out
connectors on the A/V device.
- Headphone may be connected to the headphone output (
) on the rear of your set. While the headphone is connected,
the sound from the built-in speakers will be disabled.
SERVICE 1, SERVICE 2
- Service connection for qualified service engineer.
Connecting AUDIO
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio in
connectors on the Amplifier or DVD Home Theater.
Connecting Computer
-
Connect the D- Sub cable (optional) to “PC (PC IN)” on the rear of your set and the other end to the Video Card of your computer.
- Connect the stereo audio cable (optional) to “AUDIO (PC IN)” on the rear of your set and the other end to “Audio Out” of the
sound card on your computer.
Connecting External A/V Devices (AV IN 1)
- Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out
connectors on the A/V device.
Kensington Lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
-
The place of the Kensington Lock may be different depending on its model.
DIGITAL AUDIO OUT (OPTICAL)
- Connect to a Digital Audio Component.
480i 480p 576i 576p 720p 1080i
50Hz X O X O O O
60Hz X O X X O O
Component O O O O O O
BN68-01007F-00Eng.indd 5BN68-01007F-00Eng.indd 5 2006-03-31 ¿ÀÈÄ 5:41:282006-03-31 ¿ÀÈÄ 5:41:28
English-6
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long
time. The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Installing Batteries in the Remote Control
Viewing the Remote Control
Selects a target device to be
controlled by the Samsung remote control
(TV, DVD, STB, CABLE, VCR)
Television Standby button
Number buttons for direct
channel access
One/Two-digital channel selection
It display "Channel Manager"
on the screen.
Selects the TV and DTV mode directly
VCR/DVD Functions
Rewind, Stop, Play/Pause,
Fast/Forward
Volume increase
Volume decrease
Temporary sound switch-off
Menu display and
change confirmation
Electronic Program Guide (EPG) display
Picture-In-Picture On / Off
Picture freeze
Picture effect selection
Sound effect selection
Adjusts 5 separate devices - TV, DVD,
STB, CABLE, or VCR.
Available source selection
Previous channel
DTV menu display
Automatic Power-off
P
: Next channel
P
: Previous channel
Exit the OSD
Control the cursor in the menu
Use to see information on the
current broadcast
Picture size selection
Digital subtitle display
Sound mode selection
SRS TSXT selection
When your remote does not work,
change the batteries and press the
“RESET” button for 2-3 seconds
before use.
Teletext Functions
Exit from the teletext display
Teletext index
Teletext hold
Teletext size selection
Teletext mode selection (LIST/FLOF)
Teletext sub page
P : Teletext next page
P
: Teletext previous page
Teletext cancel
Teletext reveal
Alternately select Teletext, Double, or Mix.
Fastext topic selection
Teletext store
The performance of the remote control may be affected by bright light.
This is a special remote control for the visually impaired, and has Braille points on the
Power, Channel and Volume buttons.
BN68-01007F-00Eng.indd 6BN68-01007F-00Eng.indd 6 2006-03-31 ¿ÀÈÄ 5:41:302006-03-31 ¿ÀÈÄ 5:41:30
English-7
Switching On and Off
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful
when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER
button on the remote control.
The screen is turned off and a red standby indicator appears on the front of your set.
2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or channel
up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).
It is best to unplug the set from the mains and aerial.
Placing Your Television in Standby Mode
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
2. Press the button on the front of the set.
You also can press the POWER button or the
TV/DTV
button on the remote control to turn the TV on.
The programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on the right side of the set.
4. To switch your set off, press the button again.
When the TV is initially powered on, several basic settings proceed
automatically and subsequently. The following settings are available.
1. Press the POWER button on the remote control.
The message “Start Plug & Play” is displayed with “OK” selected.
2. The message “Check antenna input.” is displayed with “OK” selected.
Press the ENTER
button.
Please check that the antenna cable is connected correctly.
3. The “Auto Store” menu is displayed with the “Start” selected.
Press the ENTER button.
The channel search will start and end automatically.
After all the available channels are stored, the “Clock Set” menu appears.
Press the
ENTER
button at any time to interrupt the memorization process.
4. Press the ENTER button.
Select the “Hour” or “Minute” by pressing the
or
button.
Set the “Hour” or “Minute” by pressing the
or
button.
You can also set the hour and minute by pressing the number buttons on the remote control.
5. Press the ENTER button to confirm your setting.
The DTV channel scan menu appears and the DTV channel is automatically updated.
If the DTV channel is updated, the Source in the source list of the Input menu is
automatically changed to DTV.
For detailed descriptions about DTV channel update, refer to page 21 of this manual.
6. Select the
“
Time Zone
”
where you locate by pressing the
or
button. Press the
ENTER
button.
Plug & Play
Auto Store: Automatically scans for and stores channels available in the local area.
Clock Set: Sets the current time for the TV clock.
BN68-01007F-00Eng.indd 7BN68-01007F-00Eng.indd 7 2006-03-31 ¿ÀÈÄ 5:41:402006-03-31 ¿ÀÈÄ 5:41:40
English-8
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1. Press the MENU button to display the menu.
Press the or button to select “Channel”, then press the ENTER
button.
2. Press the or button to select “Manual Store”, then press the ENTER button.
3. Press the ENTER
button to select “Programme”.
4. To assign a programme number to a channel, find the correct number by pressing the or button
and then press the ENTER
button.
You can also set a programme number by pressing number buttons on the remote control.
continued...
Storing Channels Manually
- Storing Channels Automatically
- Storing Channels Manually
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the or
button
to select “Setup”, then press the
ENTER
button.
2. Press the ENTER button again, to select “Plug & Play”.
3. The message to “Start Plug & Play” is displayed.
You can scan for the frequency ranges available to you. Automatically allocated programme numbers may not
correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any chan-
nels you do not wish to watch.
1. Press the MENU button to display the menu.
Press the or button to select “Channel”, then press the ENTER
button.
2. Press the ENTER
button again, to select “Auto Store”.
3. Press the ENTER button to select “Start”.
The TV will begin memorizing all of the available channels.
Press the
ENTER
button at any time to interrupt the memorization process and return to the “Channel” menu.
4. After all the available channels are stored, the “Sort” menu appears.
Storing Channels Automatically
BN68-01007F-00Eng.indd 8BN68-01007F-00Eng.indd 8 2006-03-31 ¿ÀÈÄ 5:41:452006-03-31 ¿ÀÈÄ 5:41:45
English-9
Programme: Selects a program number for the channel.
Colour System: Sets the colour supporting system.
Sound System: Sets the sound supporting system.
Channel: Selects a channel.
Search: Scans for the frequency value for the channel.
Store: Saves your settings.
Set the channels according to your preference.
You can easily delete, add, or lock the channel you want.
1. Press the MENU button to display the menu. Press the or button
to select “Channel”, then press the ENTER button.
2.
Press the or button to select “Channel Manager”,
then press the ENTER button.
3.
Press the ENTER button again, to select “Channel Manager”.
4
.
Press the button to select “ ” line.
5
.
Press the or button to select the undesired channel,
then press the ENTER button to cancel.
6. Repeat steps 5 for each channel to be selected or canceled
7. Press the EXIT button to exit.
“ ”
is active when “Child Lock” is selected to “On”.
Setting the Channel Manager
You can select these options by sim-
ply pressing the CH MGR button on
the remote control.
5. Press the or button to select “Colour System”, then press the ENTER button.
6. Select the colour standard required by pressing the or button then, press the ENTER
button.
7. Press the or button to select “Sound System”, then press the ENTER button.
8. Select the sound standard required by pressing the or button, then press the ENTER
button.
If there is an abnormal sound or no sound, re-select the sound system required.
9.
If you know the number of the channel to be stored, press the or button to select “Channel”. Press the ENTER button. Select C (Air
channel) or S (Cable channel) by pressing the or button. Press the button to select channel. Select the required number by pressing
the or button and then press the ENTER
button.
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
10. If you do not know the channel numbers, press the or button to select “Search”.
Press the ENTER button. Search by pressing the or button and then press the ENTER button.
11. Press the or button to select “Store”. Press the ENTER
button to select “OK”.
12. Repeat steps 3 to 11 for each channel to be stored.
BN68-01007F-00Eng.indd 9BN68-01007F-00Eng.indd 9 2006-03-31 ¿ÀÈÄ 5:41:482006-03-31 ¿ÀÈÄ 5:41:48
English-10
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been
automatically stored.
Give easily remembered numbers to the channels that you watch
most often.
1. Press the MENU button to display the menu. Press the or button
to select “Channel”, then press the ENTER button.
2.
Press the or button to select “Sort”, then press the
ENTER
button.
3.
Select channel number that you wish to change by pressing the
or button repeatedly. Press the ENTER
button.
The selected channel number and name are moved to right side.
4.
Press the
or
button to move to the position in which you would like to change and
then press the
ENTER
button.
The selected channel is exchanged with the one previously stored to the chosen number.
5.
Repeat steps 3 to 4 for another channel to be sorted.
6.
Press the EXIT button to exit.
Sorting the Stored Channels
This feature allows you to prevent unauthorized users, such as children, from
watching unsuitable programmes by muting out video and audio. Child Lock can-
not be released using the buttons on the side.
Only the remote control can release the Child Lock setting, so keep the remote
control away from children.
1. Press the MENU button to display the menu. Press the or button
to select “Channel”, then press the ENTER
button.
2.
Press the or button to select “Channel Manager”,
then press the ENTER button.
3.
Press the or button to select “Child Lock”,
then press the ENTER button.
4.
Press the or button to select “On” or “Off”. Press the
ENTER
button.
5.
Press the or button to select “Channel Manager”,
then press the ENTER
button.
6
.
Press the button to select “ ” line.
7
.
Press the or button to select the channels you want to lock,
then press the ENTER button.
8. Repeat steps 7 for each channel to be locked or unlocked.
9. Press the EXIT button to exit.
Select “On” or “Off” in “Child Lock” to easily turn the channels which
selected on
“ ”
to be active or inactive.
Activating the Child Lock
BN68-01007F-00Eng.indd 10BN68-01007F-00Eng.indd 10 2006-03-31 ¿ÀÈÄ 5:41:532006-03-31 ¿ÀÈÄ 5:41:53
English-11
Use fine tuning to manually adjust a particular channel for optimal reception.
1. Use the number buttons to directly select the channel that
you want to fine tune.
2. Press the MENU button to display the menu.
Press the or button to select “Channel”, then press the ENTER
button.
3. Press the or button to select “Fine Tune”, then press the ENTER
button.
4. Press the or button to adjust the fine tuning.
Press the
ENTER
button.
5. Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with an asterisk “*” on the
right-hand side of the channel number in the channel banner. And the channel number turns red.
To reset the fine-tuning, select “Reset” by pressing the or button and then press the
ENTER
button.
Fine Tuning Channel Reception
Channel names will be assigned automatically when channel
information is broadcast.
These names can be changed, allowing you to assign new names.
1. Press the MENU button to display the menu. Press the or button
to select “Channel”, then press the ENTER button.
2.
Press the or button to select “Name”, then press the
ENTER
button.
3.
If necessary, select the channel to be assigned to a new name by
pressing the
or
button. Press the ENTER button.
The selection bar is displayed around the name box.
4.
The characters available are :
Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters (
-
, space)
5.
Repeat steps 3 to 4 for each channel to be assigned to a new name.
6.
Press the EXIT button to exit.
Assigning Channels Names
To...
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
Then...
Press the
or
button
Press the
button
Press the
button
Press the ENTER button
BN68-01007F-00Eng.indd 11BN68-01007F-00Eng.indd 11 2006-03-31 ¿ÀÈÄ 5:41:562006-03-31 ¿ÀÈÄ 5:41:56
English-12
You can also press the
P.MODE button on the remote con-
trol to select one of the
picture settings.
Dynamic: Selects the picture for high-definition in a bright room.
Standard: Selects the picture for optimum display in a normal environment.
Movie: Selects the picture for comfortable display in a dark room.
Custom: Select to view your favorite display settings.
(Refer to “Adjusting the Custom Picture”)
You can select the type of picture which best corresponds to your viewing requirements.
1. Press the MENU button to display the menu. Press the or
button to select “Picture”, then press the ENTER button.
2.
Press the ENTER button again, to select “Mode”.
3.
Press the ENTER button again, to select “Mode”.
4.
Press the
or
button to select the desired picture effect.
Press the
ENTER
button.
5.
Press the EXIT button to exit.
Contrast: Adjusts the lightness and darkness between objects and the background.
Brightness: Adjusts the brightness of the whole screen.
Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
Colour: Adjusts the colours, making them lighter or darker.
Tint (NTSC only):
Adjusts the colour of objects, making them more red or green for a more natural look.
The Picture mode must be adjusted separately for each input source.
You can return to the factory defaults picture settings by selecting the “Reset”.
(Refer to “Resetting the Picture Settings to the Factory Defaults” on page 13)
Changing the Picture Standard
Your set has several settings which allow you to control picture quality.
1. To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 4.
2.
Press the
or button
to select a particular item.
Press the
ENTER
button.
3.
Press the
or button
to decrease or increase the value of a
particular item.
Press the ENTER button.
4.
Press the EXIT button to exit.
Adjusting the Custom Picture
The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only “Contrast”, “Brightness” and “Colour” can be adjusted.
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, the LNA function can improve the reception
(a low-noise preamplifier boosts the incoming signal).
1. Press the MENU button to display the menu.
Press the or button to select "Channel", then press the ENTER button.
2. Press the or button to select "LNA", then press the ENTER
button.
3. Press the or button to select "On" or "Off". Press the ENTER
button.
4. Press the EXIT button to exit.
BN68-01007F-00Eng.indd 12BN68-01007F-00Eng.indd 12 2006-03-31 ¿ÀÈÄ 5:41:592006-03-31 ¿ÀÈÄ 5:41:59
English-13
You can select the most comfortable colour tone to your eyes.
1. To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 4 on page 12.
2.
Press the or button to select “Colour Tone”, then press the ENTER button.
3.
Press the
or button
to select the desired colour tone setting.
Press the
ENTER
button.
4.
Press the EXIT button to exit.
Changing the Colour Tone
The adjusted values are stored according to the selected Picture mode.
Cool2: Makes the colour temperature bluer
than “Cool1” menu.
Cool1: Makes whites bluish.
Normal: Keeps whites white.
Warm1: Makes whites reddish.
Warm2: Makes the colour temperature redder
than “Warm1” menu.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
You can select the picture size which best corresponds to your
viewing requirements.
1. Press the MENU button to display the menu. Press the or button to
select “Picture”, then press the ENTER
button.
2. Press the or button to select “Size”, then press
the ENTER
button.
3. Select the required option by pressing the or button.
Press the
ENTER
button.
4.
Press the EXIT button to exit.
You can select these options
by simply pressing the P.SIZE but-
ton on the remote control.
In PC Mode, only “16:9” and “4:3” mode can be adjusted.
Select by pressing the or buttons. Use the or button to move the
picture up and down. After selecting , use the or button to magnify or reduce the picture
size in the vertical direction.
Changing the Picture Size
You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 4 on page 12.
2. Press the or button to select “Reset”, then press the
ENTER
button.
3.
Press the EXIT button to exit.
The “Reset” will be set for each picture mode.
Resetting the Picture Settings to the Factory Defaults
Press the STILL button to freeze a moving picture into a still one.
Press again to cancel.
Freezing the Current Picture
BN68-01007F-00Eng.indd 13BN68-01007F-00Eng.indd 13 2006-03-31 ¿ÀÈÄ 5:42:042006-03-31 ¿ÀÈÄ 5:42:04
English-14
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the picture of set
programme or video input from any connected equipment while watching the main
picture.
1. Press the MENU button to display the menu. Press the or button to
select “Picture”, then press the ENTER
button.
2.
Press the or button to select “PIP”, then press the
ENTER
button.
3. Press the ENTER button again.
Press the or button to select “On”, then press ENTER button.
If the PIP is activated, the size of the main picture turns to “16:9”.
4. Press the or button to select “Source”,
then press ENTER button. Select a source of the sub picture by pressing the
or button and press the ENTER
button.
The sub picture can serve different source selections based on what the main picture is set to.
5. Press the or button to select “Swap”.
To interchange the main picture and the sub picture, select “Swap” option and press
the ENTER
button.
The main picture and the sub picture are interchanged.
I
f main picture is in “PC” mode, “Swap” is not available.
6. Press the or button to select “Size” of the sub picture and then
press the ENTER button. Select a size of the sub picture by
pressing the or button and then press the ENTER
button.
If main picture is in “PC” mode, “Size” is not available.
7. Press the or button to select “Position”, then press the ENTER button. Select
the position of the sub picture by pressing the or button and then press the
ENTER button.
Viewing the Picture In Picture (PIP)
Press the PIP button on the remote
control repeatedly to activate or
deactivate the “PIP”.
Samsung’s new technology brings you more detailed images with
contrast and white enhancement. A new image compensation algorithm gives
viewers brighter and clearer images. DNIe technology will match every signal
to your eyes. You can see how DNIe improves the picture by setting DNIe Demo
mode to On.
1. Press the MENU button to display the menu. Press the or button to
select “Picture”, then press the ENTER
button.
2. Press the or button to select “DNIe Demo”, then press the
ENTER
button.
3.
Press the or button to select “On” or “Off”. Press the
ENTER
button.
4. Press the EXIT button to exit.
These functions don’t work in PC mode.
The DNle Demo is designed to show the difference between the regular and DNIe pictures.
By default, the product displays the picture with DNle applied.
DNIe Demo (Digital Natural Image engine)
If the broadcast signal received by your TV is weak, you can activate the Digital
Noise Reduction feature to help reduce any static and ghosting that may appear on
the screen.
1. Press the MENU button to display the menu. Press the or button to
select “Picture”, then press the ENTER
button.
2. Press the or button to select “Digital NR”, then press the
ENTER
button.
3.
Press the or button to select “On” or “Off”. Press the
ENTER
button.
4. Press the EXIT button to exit.
Digital Noise Reduction
BN68-01007F-00Eng.indd 14BN68-01007F-00Eng.indd 14 2006-03-31 ¿ÀÈÄ 5:42:092006-03-31 ¿ÀÈÄ 5:42:09
English-15
You can select the type of the special sound effect to be used when watching a
given broadcast.
1. Press the MENU button to display the menu. Press the or button to
select “Sound”, then press the ENTER
button.
2. Press the ENTER
button again, to select “Mode”.
3. Select the required sound effect by pressing the or button repeatedly and then
press the ENTER
button.
4. Press the EXIT button to exit.
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides live and full sound for movies.
Speech: Emphasizes voices over other sounds.
Custom: Selects your custom sound settings.
(Refer to “Adjusting the Sound Settings”)
You can also select these options by
simply pressing the S.MODE button
on the remote control.
PIP Settings
(O: PIP operates, X: PIP doesn’t operate)
TV AV1
AV2 S-Video Component1 Component2 PC HDMI DTV
TV
XXX X X X XOX
AV1
XXX X X X XOX
AV2
XXX X X X XOX
S-Video
XXX X X X XOX
Component1
XXX X X X XOX
Component2
XXX X X X XOX
PC
OOO X X X XXX
HDMI
OOO O O O XXX
DTV
XXX X X X XXX
Sub
Main
Changing the Sound Standard
Source: Used to select a source of the sub picture.
Swap: Used to interchange the main picture and the
sub picture.
Size: Used to select a size of the sub picture.
Position: Used to move the sub picture.
Programme: Used to Change the sub picture.
8. Press the or button to select “Programme” and then press the ENTER but-
ton. You can select the channel that you want to view through sub picture by pressing
the or button.
Press the ENTER button.
The “Programme” can be active when the sub picture is set to TV.
9. Press the EXIT button to exit.
You may notice that the picture in the PIP window becomes slightly unnatural when you use the
main screen to view a game or karaoke.
The sound settings can be adjusted to suit your personal preferences.
1. Press the MENU button to display the menu. Press the or button to
select “Sound”, then press the ENTER button.
2. Press the or button to select “Equalizer”, then press the ENTER
button.
3.
Press the
or button
to select a particular item. Press the
ENTER
button.
4. Press the or button to reach the required setting. Press the ENTER button.
5. Press the EXIT button to exit.
If you make any changes to these settings, the Sound Mode is automatically switched to
“Custom”.
Adjusting the Sound Settings
BN68-01007F-00Eng.indd 15BN68-01007F-00Eng.indd 15 2006-03-31 ¿ÀÈÄ 5:42:152006-03-31 ¿ÀÈÄ 5:42:15
English-16
If you want to hear the sound through separate speakers, cancel the internal
amplifier.
1. Press the MENU button to display the menu. Press the or button to
select “Sound”, then press the ENTER
button.
2. Press the or button to select “Internal Mute”, then press the
ENTER
button.
3.
Press the or button to select “On” or “Off”. Press the
ENTER
button.
4. Press the EXIT button to exit.
When “Internal Mute” is set to “On’, the Sound menus except for
“Sound Select” (in PIP mode) cannot be adjusted.
Selecting the Internal Mute
TruSurround XT is a patented SRS technology that solves the problem of playing
5.1 multichannel content over two speakers.
TruSurround delivers a compelling,virtual surround sound experience through
any two-speaker playback system, including internal television speakers. It is fully
compatible with all multichannel formats.
1. Press the MENU button to display the menu. Press the or button to
select “Sound”, then press the ENTER
button.
2. Press the or button to select “SRS TSXT”, then press the
ENTER button.
3.
Press the or button to select “On” or “Off”. Press the
ENTER
button.
4. Press the EXIT button to exit.
Setting the TruSurround XT (SRS TSXT)
Each broadcasting station has its own signal conditions, and so it is not easy for
you to adjust the volume every time the channel is changed. This feature allows
you to automatically adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by raising the sound output
when the modulation signal is low.
1. Press the MENU button to display the menu. Press the or button to
select “Sound”, then press the ENTER
button.
2. Press the or button to select “Auto Volume”, then press the
ENTER
button.
3.
Press the or button to select “On” or “Off”. Press the
ENTER
button.
4. Press the EXIT button to exit.
Adjusting the Volume Automatically
You can also set these options sim-
ply by pressing the SRS button on
remote control.
TruSurround XT, SRS and
symbol are trademarks of
SRS Labs, Inc. TruSurround XT technology is incorporated under license
from SRS Labs, Inc.
You can connect a set of headphones to your set if you wish to watch a
TV programme without disturbing the other people in the room.
When you insert the head set jack into the corresponding port,
you can operate only "Internal Mute" and "Sound Select" (in PIP mode) in Sound menu.
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones to the system.
Connecting Headphones
BN68-01007F-00Eng.indd 16BN68-01007F-00Eng.indd 16 2006-03-31 ¿ÀÈÄ 5:42:192006-03-31 ¿ÀÈÄ 5:42:19
English-17
You can set the TV’s clock so that the current time is displayed when you
press the INFO button. You must also set the time if you wish to use the auto-
matic On/Off timers.
1. Press the MENU button to display the menu. Press the or button to
select “Setup”, then press the ENTER button.
2.
Press the or button to select “Time”, then press the
ENTER
button.
3. Press the ENTER button to select “Clock Set”.
4.
5. Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set hour and minute by pressing the number buttons on the remote control.
Setting and Displaying the Current Time
Resetting the Sound Settings to the Factory Defaults
If Game Mode is On, the Reset Sound function is activated. Selecting the Reset
function after setting the equalizer resets the equalizer setting to the factory
defaults.
1. Press the MENU button to display the menu. Press the or button to
select “Sound”, then press the ENTER button.
2. Press the or button to select “Reset”, then press the ENTER
button.
3. Press the EXIT button to exit.
You can select this option when the “Game Mode” is set to “On”.
Listening to the Sound of the Sub Picture
During the PIP features activation, you can listen to the sound of the sub picture.
1. Press the MENU button to display the menu. Press the or button to
select “Sound”, then press the ENTER
button.
2. Press the or button to select “Sound Select”, then press the
ENTER
button.
3. Press the or button to select “Sub”. Press the ENTER
button.
4. Press the EXIT button to exit.
You can select this option when the “PIP” is set to “On”.
Main: Used to listen to the sound of the main picture.
Sub: Used to listen to the sound of the sub picture.
To... Press the...
Move to “Hour” or “Minute”
or button.
Set the “Hour” or “Minute””
or button.
Press the ENTER
button.
Selecting the Sound Mode
You can set the sound mode by pressing the “DUAL” button.
When you press it, the current sound mode is displayed on the screen.
Audio Type DUAL 1/2 Default
FM
Stereo
Mono MONO
Automatic
change
Stereo STEREO ↔ MONO
Dual DUAL 1 ↔ DUAL 2 DUAL 1
Mono MONO
Automatic
change
NICAM
Stereo
Stereo MONO ↔ STEREO
Dual
MONO ↔ DUAL 1
DUAL 2
DUAL 1
You can select this option when the “Game Mode” is set to “On”.
You can also set these options sim-
ply by pressing the DUAL button on
remote control.
BN68-01007F-00Eng.indd 17BN68-01007F-00Eng.indd 17 2006-03-31 ¿ÀÈÄ 5:42:252006-03-31 ¿ÀÈÄ 5:42:25
English-18
You can select a time period of between 30 and 180 minutes after which the televi-
sion automatically switches to standby mode.
1. Press the MENU button to display the menu.
Press the or button to select “Setup”, then press the ENTER button.
2.
Press the or button to select “Time”, then press the
ENTER
button.
3. Press the or button to select “Sleep Timer”, then press the ENTER button.
4. Press the or button repeatedly until the desired time appears
(Off, 30, 60, 90, 120, 150, 180). Press the ENTER
button.
5. Press the EXIT button to exit.
The TV automatically switches to standby mode when the timer reaches 0.
Setting the Sleep Timer
Press the SLEEP button on the
remote control repeatedly until the
appropriate time interval appears.
You can set the On/Off timers so that the set will:
Switch on automatically and tune to the channel of your choice at
the time you select.
Switch off automatically at the time you select.
The first step is to set the television’s clock.
1. Press the MENU button to display the menu. Press the or button to
select “Setup”, then press the ENTER
button.
2. Press the or button to select “Time”, then press the
ENTER
button.
3. Press the or button to select “On Timer”, then press the
ENTER
button.
4. Press the or button to adjust “Hour”, then press the button to
move to the next step. Set other items using the same method as above.
When finished, press the ENTER
button to return.
5. Press the or button to select “Off Timer”,
then press the ENTER
button.
6. Press the or button to adjust “Hour”, then press the button to
move to the next step. Set other items using the same method as above.
When finished, press the ENTER
button to return.
7. Press the EXIT button to exit.
You can also set hour and minute by pressing the number buttons on the remote control.
The "Activation" setting must be set to "Yes" in order for the timers to work.
Switching the Television On and Off Automatically
BN68-01007F-00Eng.indd 18BN68-01007F-00Eng.indd 18 2006-03-31 ¿ÀÈÄ 5:42:302006-03-31 ¿ÀÈÄ 5:42:30
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
Samsung LA40R71BD Manuel utilisateur
- Catégorie
- Téléviseurs LCD
- Taper
- Manuel utilisateur
dans d''autres langues
- English: Samsung LA40R71BD User manual
Documents connexes
-
Samsung LA40S71B Manuel utilisateur
-
Samsung LE40R73BD Manuel utilisateur
-
-
-
-
Samsung LE-46F71B Manuel utilisateur
-
-
Samsung LE-32N71B Manuel utilisateur
-
-