Samsung PS-42C96HC Manuel utilisateur

PDP-TELEVISION

(PLASMA DISPLAY PANEL)

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

ON-SCREEN MENUS

Picture In Picture (PIP)

Energy Saving

TELETEXT (Option)

SRS TruSurround XT

Digital Natural Image engine

BN68-01183V-00

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products, please contact the

SAMSUNG customer care centre.

Ota yhteyttä Samsungiin

Jos sinulla on kysymyksiä tai kommentteja koskien Samsung tuotteita voitte ottaa yhtyettä

Samsung tukeen.

Kontakta Samsung

Om du har några frågor eller synpunkter om Samsungs produkter, är du välkommen att kontakta

Samsung Support.

Country

Customer Care Centre 

Web Site

BELGIUM 02 201 2418 www.samsung.com/be

CZECH REPUBLIC 844 000 844 www.samsung.com/cz

DENMARK 70 70 19 70 www.samsung.com/dk

ESTONIA

800-7267 www.samsung.ee

FINLAND 030-6227 515 www.samsung.com/fi

FRANCE

3260 SAMSUNG (7267864) (€ 0,15/min)

www.samsung.com/fr

GERMANY 01805-121213 (€ 0,14/Min) www.samsung.de

HUNGARY

06-80-SAMSUNG (7267864) www.samsung.com/hu

ITALIA

800 SAMSUNG (7267864) www.samsung.com/it

KAZAKHSTAN 8 800 080 11 88 www.samsung.kz

LATVIA

800-7267 www.samsung.com/lv

LITHUANIA 8-800-77777 www.samsung.lt

LUXEMBURG 0032 (0)2 201 24 18 www.samsung.lu

NETHERLANDS 0900 20 200 88 (€ 0,10/Min) www.samsung.com/nl

NORWAY

815-56 480 www.samsung.com/no

POLAND 0 801 801 881 www.samsung.com/pl

PORTUGAL

80 8 200 128 www.samsung.com/pt

REPUBLIC OF IRELAND 0818 717 100 www.samsung.com/uk

RUSSIA 8-800-200-0400 www.samsung.ru

SLOVAKIA

0800-SAMSUNG (7267864) www.samsung.com/sk

SPAIN 902 10 11 30 www.samsung.com/es

SWEDEN 0771-400 200 www.samsung.com/se

SWITZERLAND 0800-7267864 www.samsung.com/ch

U.K 0870 SAMSUNG (7267864) www.samsung.com/uk

UKRAINE 8-800-502-0000 www.samsung.com/ur

UZBEKISTAN

140-1234 www.samsung.uz

Register your product at www.samsung.com/global/register

Record your Model and Serial number here for future reference.

▪ Model _______________ ▪ Serial No. _______________

This product is only applicable in Finland. Its quality is not guaranteed in other countries.

01183V-00Eng_Cover.indd 1 2007-05-08 ¿ÀÈÄ 2:52:30

English - 2

User Instructions

 Screen Image retention

Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the

plasma monitor panel for more than 2 hours as it can cause screen image retention. This image

retention is also known as “screen burn”. To avoid such image retention, reduce the degree of

brightness and contrast of the screen when displaying a still image.

 Height

The PDP can normally operate only under 2000m in height. It might abnormally function at a place

over 2000m in height so do not install and operate there.

 Heat on the top of the PDP TV

The top side of the product may be hot after long period of use as heat dissipates from the panel

through the vent hole in the upper part of the product. This is normal and does not indicate any defect

or operation failure of the product. However, children should be prevented from touching the upper

part of the product.

 The product is making a ‘cracking’ noise.

A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding

environment such as temperature or humidity. This is normal and not a defect of the unit.

 Cell Defects

The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require

sophisticated technology to produce. However, there may be few bright or dark pixels on the screen.

These pixels will have no impact on the performance of the product.

 Avoid operating the TV at temperatures below 5°C(41°F)

 A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the PDP TV in 4:3 format for a long period of time may leave traces

of borders displayed on the left, right and centre of the screen caused by the

difference of light emission on the screen. Playing a DVD or a game console

may cause similar effect to the screen. Damages caused by the above effect are

not covered by the Warranty.

 Afterimage on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may

produce partial afterimages. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when

displaying still images.

 Warranty

- Warranty does not cover any damage caused by image retention.

- Burn-in is not covered by the warranty.

 Installation

Be sure to contact an authorized service centre, when installing your set in a location with heavy

dust, high or low temperatures, high humidity, chemical substance and where it operates continually

such as the airport, the train station etc. Failure to do so may cause a serious damage to your set.

Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2)

digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive

DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with

the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be

available in some countries.

BN68-01183V-00Eng.indd 2 2007-04-27 ¿ÀÈÄ 10:05:19

English - 3

Symbols

☛ ➢

Press

Important

Note

Contents

General Information

 User Instructions ............................................. 2

 Checking Parts ................................................ 4

 Using the Stand-Base ..................................... 4

 Control Panel ................................................. 5

 Connection Panel ............................................ 6

 Viewing the Remote Control (PS-42Q96HC/

PS-50Q96HC) ................................................. 8

 Viewing the Remote Control (PS-42C96HC/

PS-50C96HC) ................................................. 9

Operation

 Switching Your Television On and Off ........... 10

 Viewing the Menus ........................................ 11

 Plug & Play Feature ...................................... 11

 Viewing an External Signal Source ............... 13

 Editing Device Names ................................... 14

Channel Control

 Storing Channels Automatically .................... 14

 Storing Channels Manually ........................... 15

 Adding / Locking Channels ........................... 16

 Sorting the Stored Channels ......................... 17

 Assigning Names to Channels ...................... 17

 Fine Tuning Channel Reception .................... 18

Picture Control

 Changing the Picture Standard ..................... 19

 Customizing the Picture Settings .................. 19



Conﬁguring Detailed Settings on the Picture

.. 20

 Selecting the Picture Size ............................. 21

 Selecting the Screen Mode ........................... 21

 Digital NR / Active Colour / DNIe /

Movie Plus .................................................... 22

 Freezing the Current Picture ......................... 22

Sound Control

 Sound Features ............................................ 23

 Selecting the Sound Mode (depending on

the model) ..................................................... 24

Function Description

 Time Features ............................................... 25

 Language / Blue Screen / Melody /

Light Effect / Energy Saving /

HDMI Black Level ......................................... 26

 Using the Game Mode .................................. 27

 Wall- mount adjustment (Sold separately) .... 28

 Viewing the Picture in Picture (PIP) .............. 29

 Screen Burn Protection ................................. 30

PC Display

 Setting up Your PC Software (Based on

Windows XP) ................................................ 31

 Input Mode (PC) ............................................ 32

 Setting the PC ............................................... 33

 Setting the Home Theatre PC ....................... 34

Using the DTV Feature

 Previewing the DTV Menu System ............... 35

 Displaying Programme Information ............... 36

 Operating the DTV Menu .............................. 37

About Anynet+ (PS-42Q96HC/PS-50Q96HC)

 What is Anynet+? .......................................... 47

 Connecting Anynet+ Devices ........................ 47

 Setting Up Anynet+ ....................................... 48

 Scanning and Switching between Anynet+

Devices ......................................................... 48

 Recording ...................................................... 49

 Listening through a Receiver ........................ 50

 Check Points before Requesting Service ..... 50

Appendix

 Teletext Feature (depending on the model) .. 51

 Wall Mount Kit Speciﬁcations (VESA) ........... 53

 Setting Up Your Remote Control ................... 54

 How to assemble the Stand-Base

(depending on the model) ............................. 59

 Troubleshooting ............................................ 59

 Speciﬁcations ................................................ 60

BN68-01183V-00Eng.indd 3 2007-04-27 ¿ÀÈÄ 10:05:20

English - 4

Checking Parts

Owner’s Instructions Remote Control/

AAA Batteries

Power Cord Cloth-Clean

Warranty Card/

Registration Card/

Safety Guide Manual

Cover-Bottom / Screws (2ea)

(Refer to page 59)

Ferrite Core for Power Cord/

S-Video Cable

Ferrite Core for

Headphones Cable/

Power Cord

Sold Separately

S-Video Cable Antenna Cable Component Cables Audio Cables Video Cable

PC Cable Scart Cable PC Audio Cable HDMI Cable HDMI/DVI Cable

➢

Ferrite Core (Power Cord, Headphones Cable, S-Video Cable)

The ferrite core is used to shield the cable from interference.

When connecting a cable, open the ferrite core and clip it

around the cable.

Using the Stand-Base

➢



Two or more people should carry

the PDP. Never lay the PDP on the

floor because of possible damage

to the screen. Always keep the

PDP upright.



The PDP can rotate 20 degrees in

right and left directions.

-20° ~ 20°

BN68-01183V-00Eng.indd 4 2007-04-27 ¿ÀÈÄ 10:05:23

English - 5

Control Panel

1

SOURCE

Displays a menu of all of the available input

sources (TV, Ext.1, Ext.2, AV, S-Video,

Component, PC, HDMI1, HDMI2, HDMI3, and

DTV).

➢

HDMI3 mode is available only in

PS-42Q96HC/PS-50Q96HC models.

2

MENU

Press to see the on-screen menu of your TV’s

features.

3

+



−

Press to increase or decrease the volume.

In the on-screen menu, use the +



−

buttons as you use the ◄ and ► buttons on

the remote control.

4

C/P.

Press to change channels. In the on-screen

menu, use the C/P. buttons as

you use the ▲ and ▼ buttons on the remote

control.

5

(ENTER)

Press to confirm a selection.

6

(Power) button

Press to turn the TV on and off.

Power Indicator

− Power Off: Blue

− Power On: Off

Remote Control Sensor

Aim the remote control towards this spot on

the TV.

➢

The product colour and shape may vary depending on the model.

Front (or Side) Panel

Speaker

BN68-01183V-00Eng.indd 5 2007-04-27 ¿ÀÈÄ 10:05:25

English - 6

Connection Panel

1

HDMI IN 3 (PS-42Q96HC/PS-50Q96HC)

Connect to the HDMI jack of a device with

HDMI output.

2

S-VIDEO or VIDEO / AUDIO L/R

Video (S-Video or Video) and audio inputs for

external devices, such as a camcorder or VCR.

3

Headphones jack

You can connect a set of headphones if you

wish to watch a television programme without

disturbing the other people in the room.

➢

Prolonged use of headphones at a high

volume may damage your hearing.

Continued...

☛



Whenever you connect an audio or video system to your set, ensure that all elements are

switched off.



When connecting an external device, match the colour of the connection terminal to the cable.

➢

The product colour and shape may vary depending on the model.

➢

The product colour and shape may vary depending on the model.

Side Panel

3

or

1

Rear Panel

1

3

7

4

2

Cable Television

Network

0

6

9

or

5

8

2

BN68-01183V-00Eng.indd 6 2007-04-27 ¿ÀÈÄ 10:05:28

English - 7

1

POWER IN

Connect the supplied power cord.

2

Connecting external Audio Devices

Connect RCA audio signals from the TV to an

external source, such as Audio equipment.

3

EXT 1, EXT 2

Inputs or outputs for external devices, such as

VCR, DVD, video game device or video disc

players.

Input/Output Specification

Connector

Input Output

Video Audio(L/R)

RGB Video + Audio(L/R)

EXT 1

✔ ✔ ✔

Only TV or DTV

output is available.

EXT 2

✔ ✔

Output you can

choose.

4

COMPONENT IN

Audio (AUDIO L/R) and video (Y/PB/PR) inputs

for Component.

5

DIGITAL AUDIO OUT (OPTICAL)

Connect to a Digital Audio Component.

6

SERVICE

− Connector for service.

− Connect the serial jack between the

electro-motion wall mount bracket and your

TV when you want to adjust the TV viewing

angle using your remote control.

7

PC IN / AUDIO

Connect to the video and audio output jack on

your PC.

8

COMMON INTERFACE Slot

Insert CI (Common Interface) card into the slot.

(refer to page 46)

− When not inserting “CI CARD” in some

channels, “Scramble Signal” is displayed on

the screen.

− The pairing information containing a

telephone number, CI CARD ID, Host ID,

and other information will be displayed in

about 2~3 minutes. If an error message

is displayed, please contact your service

provider.

− When the channel information configuration

has finished, the message “Updating

Completed” is displayed, indicating that the

channel list is now updated.

➢

Insert the CI-Card in the direction marked

on it.

9

HDMI IN 1, HDMI IN 2

− Connect to the HDMI jack of a device with

HDMI output. These inputs can also be used

as a DVI connection with separate analog

audio inputs. An optional HDMI/DVI cable

will be necessary to make this connection.

When using the optional HDMI/DVI adapter,

the DVI analog audio inputs on your TV

allow you to receive left and right audio from

your DVI device. (Not compatible with PC)

− When connecting this product via HDMI or

DVI to a Set Top Box, DVD Player or Games

Console etc, make sure that it has been

set to a compatible video output mode as

shown in the table below. Failure to observe

this may result in picture distortion, image

breakup or no picture.

− Do not attempt to connect the HDMI/DVI

connector to a PC or Laptop Graphics Card.

(This will result in a blank screen being

displayed)

DVI IN (HDMI 2) AUDIO L/R

DVI audio outputs for external devices.

0

ANT IN

75Ω Coaxial connector for Aerial/Cable

Network.

Supported modes for HDMI and Component

480i 480p 576i 576p 720p 1080i

HDMI/DVI 50Hz X X X O O O

HDMI/DVI 60Hz X O X X O O

Component O O O O O O

BN68-01183V-00Eng.indd 7 2007-04-27 ¿ÀÈÄ 10:05:29

English - 8

Viewing the Remote Control (PS-42Q96HC/PS-50Q96HC)

➢



This is a special remote control for the visually impaired persons, and has Braille points on the

Power, Channel, Volume, STOP, and PLAY/PAUSE buttons.



The performance of the remote control may be affected by bright light.

1

POWER button

(turns the TV on and off)

2

Number buttons for direct

channel access

3

One/Two-digit channel

selection

4

Channel control button

(Refer to page 16)

5

Selects the TV and DTV

mode directly

6

Volume increase

Volume decrease

7

Temporary sound switch-off

8

Displays the main on-screen

menu

9

Returns to the previous

menu

@

Picture size selection

#

Electronic Program Guide

(EPG) display

$

Sound mode selection

%

Remote control setup

^

Selects a target device to be

controlled by the Samsung

remote control (TV, DVD,

STB, CABLE, VCR)

&

Press to backlight the VOL,

CH, and the active source

button (TV, DVD, CABLE,

STB, VCR) on the remote.

*

Available source selection

(

Previous channel

)

DTV menu display

a

Records for Live

Broadcasting

b

VCR/DVD Function (Rewind,

Stop, Play/Pause, Fast/

Forward)

c

Next channel

Previous channel

d

Exit the on-screen menu

e

Control the cursor in the

menu

f

Use to see information on

the current broadcast

g

Runs the Anynet

+

view

functions and sets up

Anynet

+

devices.

h

Picture-In-Picture On/Off

i

Picture effect selection

(Refer to page 19)

j

Digital subtitle display

k

Picture freeze

l

If your remote control is not

functioning properly, take out

the batteries and press the

reset button for about 2~3

seconds.

Re-insert the batteries and

try using the remote control

again.

Teletext Functions

(Refer to page 51)

5

Exit from the teletext display

(depending on the model)

8

Teletext index

0

Fastext topic selection

!

Teletext display/mix both

teletext information and the

normal broadcast

@

Teletext size

*

Teletext mode selection

(LIST/FLOF)

(

Teletext sub page

c

P :Teletext next page

P :Teletext previous page

d

Teletext cancel

f

Teletext reveal

h

Teletext hold

i

Teletext store

Continued...

BN68-01183V-00Eng.indd 8 2007-04-27 ¿ÀÈÄ 10:05:30

English - 9

Viewing the Remote Control (PS-42C96HC/PS-50C96HC)

➢



This is a special remote control for the visually impaired persons, and has Braille points on the

Power, Channel, Volume, STOP, and PLAY/PAUSE buttons.



The performance of the remote control may be affected by bright light.

1

POWER button

(turns the TV on and off)

2

Number buttons for direct

channel access

3

One/Two-digit channel

selection

4

Channel control button

(Refer to page 16)

5

Selects the TV and DTV

mode directly

6

Volume increase

Volume decrease

7

Temporary sound switch-off

8

Displays the main on-screen

menu

9

Returns to the previous

menu

!

TruSurround XT mode

button

@

Picture size selection

#

Electronic Program Guide

(EPG) display

$

Sound mode selection

%

Remote control setup

^

Selects a target device to be

controlled by the Samsung

remote control (TV, DVD,

STB, CABLE, VCR)

&

Press to backlight the VOL,

CH, and the active source

button (TV, DVD, CABLE,

STB, VCR) on the remote.

*

Available source selection

(

Previous channel

)

DTV menu display

a

Selects the HDMI mode

directly

b

VCR/DVD Function (Rewind,

Stop, Play/Pause, Fast/

Forward)

c

Next channel

Previous channel

d

Exit the on-screen menu

e

Control the cursor in the

menu

f

Use to see information on

the current broadcast

h

Picture-In-Picture On/Off

i

Picture effect selection

(Refer to page 19)

j

Digital subtitle display

k

Picture freeze

l

If your remote control is not

functioning properly, take out

the batteries and press the

reset button for about 2~3

seconds.

Re-insert the batteries and

try using the remote control

again.

Teletext Functions

(Refer to page 51)

5

Exit from the teletext display

(depending on the model)

8

Teletext index

0

Fastext topic selection

@

Teletext size

*

Teletext mode selection

(LIST/FLOF)

(

Teletext sub page

c

P :Teletext next page

P :Teletext previous page

d

Teletext cancel

f

Teletext reveal

g

Teletext display/mix both

teletext information and the

normal broadcast

h

Teletext hold

i

Teletext store

Continued...

BN68-01183V-00Eng.indd 9 2007-04-27 ¿ÀÈÄ 10:05:32

English - 10

Installing Batteries in the Remote Control

1 Lift the cover at the back of the remote control upward as

shown in the figure.

2 Install two AAA size batteries.

➢

 Make sure to match the “+” and “–” ends of the

batteries with the diagram inside the compartment.

 Do not mix battery types, i.e. alkaline and manganese.

3 Close the cover as shown in the figure.

➢

Remove the batteries and store them in a cool and dry

place if you won’t be using the remote control for a long

time. The remote control can be used up to about 23 feet

from the TV. (Assuming typical TV usage, the batteries last

for about one year.)

➢

If the remote control doesn’t work! Check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power cut, or is the power cord unplugged?

5. Is there a special fluorescent light or a neon sign nearby?

Switching Your Television On and Off

The main lead is attached to the rear of the television.

1 Plug the main lead into an appropriate socket.

➢

The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.

2 Press the (Power) button (On/Off) on the front of the television or press the POWER button on the

remote control to switch the television on. The programme that you were watching last is re-selected

automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Storing

Channels Automatically” on page 14 or “Storing Channels Manually” on page 15.

➢

If the television is initially powered on, several basic customer settings proceed automatically.

Refer to “Plug & Play Feature” on page 11.

3 To switch the television off, press the (Power) button (On/Off) on the front of the television or press

the POWER button on the remote control.

4 To switch the TV on, press the (Power) button (On/Off) on the front of the TV or press the POWER

button or number buttons on the remote control.

BN68-01183V-00Eng.indd 10 2007-04-27 ¿ÀÈÄ 10:05:33

English - 11

Viewing the Menus

1 Press the MENU button.

The main menu is displayed on the screen.

Its left side has five icons: Picture, Sound, Channel, Setup,

and Input.

2 Press the ▲ or ▼ button to select one of the icons.

Press the ENTER/OK button to access the icon’s sub-menu.

3 Press the ▲ or ▼ button to move to items in the menu.

Press the ENTER/OK button to enter items in the menu.

4 Press the ▲/▼/◄/► button to change the selected items.

Press the RETURN button to return to the previous menu.

5 Press the EXIT button to exit from the menu.

➢

The illustration for remote control and OSD (On Screen

Display) shown in this manual has been created based on the

PS-42Q96HC model. Even though the configuration is different

from your model, the operation method is the same as in the

illustration.

Plug & Play Feature

When the television is initially powered on, several basic

customer settings proceed automatically and subsequently.

The following settings are available.

☛

If you accidentally select the wrong country for your TV, the

characters on the screen may be wrongly displayed.

☛

Any functions related to Digital TV (DVB) will only work in

countries or areas where DVB-T (MPEG2) digital terrestrial

signals are broadcasted. Please confirm with your local dealer if

you can receive DVB-T signals. Although this TV set follows the

DVB-T specification, maintaining compatibility with the future

coming DVB-T digital terrestrial broadcasts is not guaranteed.

Several functions may not be available in some countries.

☛

This product is only applicable in Finland. Its quality is not

guaranteed in other countries.

1 If the television is in standby mode, press the POWER button

on the remote control. The message Start Plug & Play is

displayed. Press the ENTER/OK button.

2 The Language menu will automatically appear after several

seconds.

3 Select the appropriate language by pressing the ▲ or ▼ button.

Press the ENTER/OK button. The message Select Home

Mode when installing this TV at home. is displayed.

4 Press the ◄ or ► button to select Shop or Home, then press

the ENTER/OK button. The message to check the connected

status of the antenna is displayed.

➢

The default selection is Home.

➢

We recommend setting the TV to Home mode for the best

picture in your home environment.

➢

Shop mode is only intended for use in retail environments.

➢

If the unit is accidentally set to Shop mode, and you want to

return to Dynamic (Home) mode, press the Volume button

and then hold down the MENU button for five seconds on

the TV panel.

5 Make sure that the antenna is connected to the TV.

Press the ENTER/OK button. The Country menu is displayed.

Continued...

Move

Enter

Exit

Mode :

Dynamic 

Contrast 100

Brightness 45

Sharpness 75

Colour 55

Tint G 50 R 50

Colour Tone :

Cool1 

Detailed Settings 

 More

Picture

T V

Plug & Play

Start Plug & Play.

OK

Enter

Return

Plug & Play

Language

Move

Enter

Skip

English

Deutsch

Français

Italiano

▼

Plug & Play

Select Home Mode

when installing this TV at home.

Move

Enter

Skip

Shop

Home

Plug & Play

Country

Move

Enter

Skip

▲

Others

Sweden

Finland

Denmark

Plug & Play

Check antenna input.

Enter

Skip

OK

BN68-01183V-00Eng.indd 11 2007-04-27 ¿ÀÈÄ 10:05:35

English - 12

6 The Auto Store menu is displayed with the Start selected.

Press the ENTER/OK button.

➢

The channel search will start and end automatically.

The DTV channel scan menu appears and the DTV

channel is automatically updated.

➢

If the DTV channel is updated, the Source in the source

list of the Input menu is automatically changed to DTV.

After all the available channels are stored, the Clock Set

menu appears.

➢

Press the ENTER/OK button at any time to interrupt the

memorization process.

➢

For detailed descriptions about DTV channel update, refer

to page 37 of this manual. After all the available digital

channels are stored, the screen to select a time zone is

displayed depending on the country

7 Press the ◄ or ► button to select Month, Day, Year, Hour, or

Minute. Set these by pressing the ▲ or ▼ button.

➢

You can set the Month, Day, Year, Hour, or Minute

directly by pressing the numeric buttons on the remote

control.

8 Press the ENTER/OK button to confirm your setting. The

message Enjoy your viewing is displayed. When you have

finished, press the ENTER/OK button.

➢

Even if the ENTER/OK button is not pressed, the message

will automatically disappear after several seconds.

If you want to reset this feature …

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Setup, then press the

ENTER/OK button.

3 Press the ENTER/OK button again to select Plug & Play.

The message Start Plug & Play is displayed.

Plug & Play

Auto Store

P 1 C -- 40 MHz

0 %

Enter

Skip

Start

Plug & Play

Scanning for digital services...

29%

Services found: 6 Channel: 35

Skip

Stop

OK

Enjoy your viewing

Plug & Play

Set the current time.

Adjust

Move

Select

Skip

01





15

Month Day Year

Hour Minute

2007

12 00

Move

Enter

Return

Plug & Play



Language :

English 

Time



Game Mode : Off 

Blue Screen :

Off 

Melody :

Off 

PC



Home Theatre PC : Off 

Light Effect :

Standby Mode On



 More

Setup

T V

BN68-01183V-00Eng.indd 12 2007-04-27 ¿ÀÈÄ 10:05:36

English - 13

Viewing an External Signal Source

You can switch between viewing signals from connected

equipment, such as a VCR, DVD, Set-Top Box, and the TV

source (broadcast or cable).

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Input, then press the

ENTER/OK button.

3 Press the ENTER/OK button again to select Source List.

4 Press the ▲ or ▼ button to select the signal source, then press

the ENTER/OK button.

Available signal sources:

TV, Ext.1, Ext.2, AV, S-Video,

Component, PC, HDMI1, HDMI2, HDMI3, DTV

➢

HDMI3 mode is available only in PS-42Q96HC/

PS-50Q96HC models.

➢

You can select these options simply by pressing the SOURCE

button on the remote control.

➢

To watch television programme again, press the TV/DTV button

and select the channel number required.

Move

Enter

Return

Source List :

TV 

Edit Name



Anynet+ (HDMI-CEC)

Input

T V

Move

Enter

Return

TV

Ext.1 :

−−−−

Ext.2 :

−−−−

AV

: −−−−

S-Video

: −−−−

Component : −−−−

PC : −−−−

HDMI1 : −−−−

HDMI2 : −−−−

HDMI3 : −−−−

DTV

Source List

T V

BN68-01183V-00Eng.indd 13 2007-04-27 ¿ÀÈÄ 10:05:37

English - 14

Editing Device Names

You can give a name to the external source.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Input, then press the

ENTER/OK button.

3 Press the ▲ or ▼ button to select Edit Name, then press the

ENTER/OK button.

4 Press the ▲ or ▼ button to select the external source to be

edited, then press the ENTER/OK button.

5 Select the required device by pressing ▲ or ▼, then press the

ENTER/OK button.

Available device names:

VCR, DVD, D-VHS, Cable STB, HD

STB, Satellite STB, AV Receiver, DVD Receiver, Game,

Camcorder, DVD Combo, DHR (DVD HDD Recorder), PC.

6 Press the EXIT button to exit.

➢

HDMI3 mode is available only in PS-42Q96HC/

PS-50Q96HC models.

Storing Channels Automatically

➢

Not available in DTV or external input mode.

You can scan for the frequency ranges available to you

(availability depends on your country).

Automatically allocated programme numbers may not

correspond to actual or desired programme numbers. However

you can sort numbers manually and clear any channels you do

not wish to watch.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER/OK button.

3 Press the ENTER/OK button again. The available countries are

listed.

4 Select your country by pressing the ▲ or ▼ button, then press

the ENTER/OK button.

➢

Even though you have changed the country setting in this

menu, the country setting for DTV is not changed. Use the

Plug & Play function to change the country setting for DTV.

(Refer to page 11 to 12)

5 Press the ▲ or ▼ button to select Auto Store, then press the

ENTER/OK button.

6 Press the ENTER/OK button again to start the search.

The search will end automatically.

➢

To stop the search before it has finished, press the MENU

or the ENTER/OK button.

Move

Enter

Return

Source List :

TV 

Edit Name



Anynet+ (HDMI-CEC)

Input

T V

Move

Enter

Return

Country :

Finland 

Auto Store



Manual Store



Channel Manager



Sort



Name



Fine Tune



Channel

T V

Move

Enter

Return

Ext.1 : −−−−

Ext.2 :

−−−−

AV :

−−−−

S-Video :

−−−−

Component :

−−−−

PC :

−−−−

HDMI1 :

−−−−

HDMI2 :

−−−−

HDMI3 :

−−−−

Edit Name

T V

−−−−

VCR

DVD

D-VHS

Cable STB

HD STB

Satellite STB

▼

Auto Store

P 1 C -- 40 MHz

0 %

Enter

Return

Start

Move

Enter

Return

Country : Finland

Auto Store

Manual Store

Channel Manager

Sort

Name

Fine Tune

Channel

T V

▲

Sweden

Finland

Denmark

BN68-01183V-00Eng.indd 14 2007-04-27 ¿ÀÈÄ 10:05:38

English - 15

Storing Channels Manually

➢

Not available in DTV or external input mode.

You can store television channels, including those received via

cable networks.

When storing channels manually, you can choose:

 Whether or not to store each of the channels found.

 The programme number of each stored channel which you wish

to identify.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER/OK button.

3 Press the ▲ or ▼ button to select Manual Store, then press

the ENTER/OK button.

4 Select the required option by pressing the ▲ or ▼ button, then

press the ENTER/OK button.

5 When you are satisfied with your setting, press the ENTER/OK

button.

6 Press the EXIT button to exit.

 Programme (Programme number to be assigned to a channel)

− Press the ▲ or ▼ button until you find the correct number.

➢

You can also select the channel number directly by pressing the numeric buttons (0~9).

 Colour System: Auto/PAL/SECAM/NTSC4.43

− Press the ▲ or ▼ button to select the required colour standard.

 Sound System: BG/DK/I/L

− Press the ▲ or ▼ button to select the required sound standard.

 Channel (When you know the number of the channel to be stored)

− Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).

− Press the ► button, then press the ▲ or ▼ button to select the required number.

➢

You can also select the channel number directly by pressing the numeric buttons (0~9).

➢

If there is abnormal sound or no sound, re-select the sound standard required.

 Search (When you do not know the channel numbers)

− Press the ▲ or ▼ button to start the search.

− The tuner scans the frequency range until the first channel or the channel that you selected is

received on the screen.

 Store (When you store the channel and associated programme number)

− Set to OK by pressing the ENTER/OK button.

☛

Channel mode

 P (Programme mode): When completing tuning, the broadcasting stations in your area have

been assigned to position numbers from P00 to P99. You can select a channel by entering the

position number in this mode.

 C (Air channel mode): You can select a channel by entering the assigned number to each air

broadcasting station in this mode.

 S (Cable channel mode): You can select a channel by entering the assigned number for each

cable channel in this mode.

Move

Enter

Return

Country :

Finland 

Auto Store



Manual Store



Channel Manager



Sort



Name



Fine Tune



Channel

T V

Move

Enter

Return

Programme :

P 15

Colour System :

Auto 

Sound System :

BG 

Channel :

C 43

Search :

645 MHz

Store :

?

Manual Store

T V

BN68-01183V-00Eng.indd 15 2007-04-27 ¿ÀÈÄ 10:05:39

English - 16

Adding / Locking Channels

➢

Not available in DTV or external input mode.

Using the Channel Manager, you can conveniently lock or add

channels.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER/OK button.

3 Press the ▲ or ▼ button to select Channel Manager, then

press the ENTER/OK button.

 Adding channels

Using the Channel List, you can add channels.

4 Select Channel List by pressing the ENTER/OK button.

5 Move to the ( ) field by pressing the ▲/▼/◄/► buttons,

select a channel to be added, and press the ENTER/OK button

to add the channel.

➢

If you press the ENTER/OK button again, the ( ) symbol

next to the channel disappears and the channel is not

added.

 Locking channels

This feature allows you to prevent unauthorized users, such as

children, from watching unsuitable programmes by muting out video

and audio.

6 Press the ▲ or ▼ button to select Child Lock, then press the ENTER/

OK button.

7 Select On by pressing the ▲ or ▼ button, then press the ENTER/OK

button.

8 Press the ▲ or ▼ button to select Channel List, then press the

ENTER/OK button.

9 Move to the ( ) field by pressing the ▲/▼/◄/► buttons, select a

channel to be locked, and press the ENTER/OK button.

➢

If you press the ENTER/OK button again, the ( ) symbol next to

the channel disappears and the channel lock is canceled.

➢

A blue screen is displayed when Child Lock is activated.

10 Press the EXIT button to exit.

➢

You can select these options simply by pressing the CH LIST

button on the remote control.

Move

Enter

Return

Country :

Finland 

Auto Store



Manual Store



Channel Manager



Sort



Name



Fine Tune



Channel

T V

Move

Enter

Return

Channel List 

Child Lock :

Off 

Channel Manager

T V

Channel List

P 1 C 4

1 / 10

▲

▼

Prog.

0 C

-

1 C 4

2 C 24

3 C 2

4 C 5

5 C 80

6 C 7

7 C 36

8 C 52

9 C 11

Add Lock

Move Enter

Page

Return

BN68-01183V-00Eng.indd 16 2007-04-27 ¿ÀÈÄ 10:05:40

English - 17

Sorting the Stored Channels

➢

Not available in DTV or external input mode.

This operation allows you to change the programme numbers

of the stored channels.

This operation may be necessary after using the auto store.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER/OK button.

3 Press the ▲ or ▼ button to select Sort, then press the ENTER/

OK button.

4 Select the channel that you wish to move by pressing the ▲ or

▼ button, then press the ENTER/OK button.

5 Select the number of the programme to which the channel is to

be moved by pressing the ▲ or ▼ button.

Press the ENTER/OK button. The channel is moved to its new

position and all other channels are shifted accordingly.

6 Repeat steps 4 to 5 until you have moved all the channels to

the required programme numbers.

7 Press the EXIT button to exit.

Assigning Names to Channels

➢

Not available in DTV or external input mode.

Channel names will be assigned automatically when channel

information is broadcast. These names can be changed,

allowing you to assign new names.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER/OK button.

3 Press the ▲ or ▼ button to select Name, then press the

ENTER/OK button.

4 Press the ▲ or ▼ button to select the channel to be assigned to

a new name, then press the ENTER/OK button.

5 Press the ▲ or ▼ button to select a letter, a number, or a

symbol (Results in this sequence: A~Z, 0~9, +, -, *, /, blank).

Move on to the previous or next letter by pressing the ◄ or ►

button, then press the ENTER/OK button.

6 Repeat steps 4 to 5 for each channel to be assigned to a new

name.

7 Press the EXIT button to exit.

Move

Enter

Return

Country :

Finland 

Auto Store



Manual Store



Channel Manager



Sort



Name



Fine Tune



Channel

T V

Move

Enter

Return

Prog. Ch. Name



0 C−−

1 C76

2 C5

3 C6

4 C7 



Sort

T V

Move

Enter

Return

Prog. Ch. Name



0 C−− −−−−−

1 C76 −−−−−

2 C5 −−−−−

3 C6 −−−−−

4 C7 −−−−−



Name

T V

Move

Enter

Return

Country :

Finland 

Auto Store



Manual Store



Channel Manager



Sort



Name



Fine Tune



Channel

T V

BN68-01183V-00Eng.indd 17 2007-04-27 ¿ÀÈÄ 10:05:42

English - 18

Fine Tuning Channel Reception

➢

Not available in DTV or external input mode.

If the reception is clear, you do not have to fine tune the

channel, as this is done automatically during the search and

store operation.

If the signal is weak or distorted, you may have to fine tune the

channel manually.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER/OK button.

3 Press the ▲ or ▼ button to select Fine Tune, then press the

ENTER/OK button.

4 To obtain a sharp, and clear picture and good sound quality,

press the ◄ or ► button until you reach the optimal setting.

Press the ENTER/OK button.

➢

To reset the fine tuning to 0, select Reset by pressing the

▲ or ▼ button. Press the ENTER/OK button.

5 Press the EXIT button to exit.

➢

Fine Tune Store will change the colour of the Channel OSD

(On Screen Display) from White to Red and add the “*”

mark.

Fine Tune

P 1

+3

Adjust

Save

Return

Reset

P 1 *

Mono

Picture : Dynamic

Sound : Custom

SRS TS XT : Off

−−

:

−−

Move

Enter

Return

Country :

Finland 

Auto Store



Manual Store



Channel Manager



Sort



Name



Fine Tune



Channel

T V

BN68-01183V-00Eng.indd 18 2007-04-27 ¿ÀÈÄ 10:05:42

English - 19

Changing the Picture Standard

You can select the type of picture which best corresponds to

your viewing requirements.

1 Press the MENU button to display the menu.

2 Press the ENTER/OK button to select Picture.

3 Press the ENTER/OK button again to select Mode.

4 Select the required mode by pressing the ▲ or ▼ button, then

press the ENTER/OK button.

Available modes:

Dynamic, Standard, Movie

➢

The settings values may vary depending on the input

source. (ex. RF, Video, Component, PC, or HDMI)

5 Press the EXIT button to exit.

➢

You can select these options simply by pressing the P.MODE

button on the remote control.

➢



Choose Dynamic for viewing the TV during the day or

when there is bright light in the room.



Choose Standard for general TV watching mode.



Choose Movie when viewing the movie.

Customizing the Picture Settings

Your television has several setting options that allow you to

control the picture quality.

1 Press the MENU button to display the menu.

2 Press the ENTER/OK button to select Picture.

3 Press the ENTER/OK button again to select Mode.

4 Select the required mode by pressing the ▲ or ▼ button, then

press the ENTER/OK button.

Available modes:

Dynamic, Standard, Movie

5 Select the required option by pressing the ▲ or ▼ button, then

press the ENTER/OK button.

6 When you are satisfied with your setting, press the ENTER/OK

button.

7 Press the EXIT button to exit.

 Contrast – Brightness – Sharpness – Colour – Tint

➢

In TV, AV, S-Video modes of the PAL system, you cannot

use the Tint Function.

Contrast – Brightness – Colour Tone : PC Mode

Press the ◄ or ► button until you reach the optimal setting.

 Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2

➢

When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.

 Reset: Cancel/OK

Select

OK. You can return to the factory defaults picture settings.

➢

The reset function is set for each picture mode and colour tone.

Move

Enter

Return

Mode :

Dynamic 

Contrast 100

Brightness 45

Sharpness 75

Colour 55

Tint G 50 R 50

Colour Tone :

Cool1 

Detailed Settings 

 More

Picture

T V

Move

Enter

Return

Mode : Dynamic

Contrast 100

Brightness 45

Sharpness 75

Colour 55

Tint G 50 R 50

Colour Tone :

Cool1

Detailed Settings 

 More

Picture

T V

Dynamic

Standard

Movie

Move

Enter

Return

Mode : Dynamic

Contrast 100

Brightness 45

Sharpness 75

Colour 55

Tint G 50 R 50

Colour Tone

: Cool1

Detailed Settings �

 More

Picture

T V

Cool2

Cool1

Normal

Warm1

Warm2

Move

Enter

Return

Mode :

Dynamic 

Contrast 100

Brightness 45

Sharpness 75

Colour 55

Tint G 50 R 50

Colour Tone :

Cool1 

Detailed Settings 

 More

Picture

T V

BN68-01183V-00Eng.indd 19 2007-04-27 ¿ÀÈÄ 10:05:43

English - 20

Configuring Detailed Settings on the Picture

You can set detailed picture settings.

1 Press the MENU button to display the menu.

2 Press the ENTER/OK button to select Picture.

3 Press the ▲ or ▼ button to select Detailed Settings, then

press the ENTER/OK button.

4 Select the required option by pressing the ▲ or ▼ button, then

press the ENTER/OK button.

Available options: Black Adjust

, Dynamic Contrast, Gamma,

White Balance, My Colour Control, Edge Enhancement,

Colour Space

5 When you are satisfied with your setting, press the ENTER/OK

button.

6 Press the EXIT button to exit.

➢

When the picture mode is set to Movie or Standard, Detailed

Settings can be selected.

➢

If DNIe is Off, the Detailed Settings cannot be selected when

the Picture mode is in Standard mode.

 Black Adjust: Off/Low/Medium/High

You can directly select the black level on the screen to adjust the screen depth.

 Dynamic Contrast: Off/Low/Medium/High

You can adjust the screen contrast so that the optimal contrast is provided.

 Gamma: -3 ~ +3

You can adjust the middle brightness of pictures.

Press the ◄ or ► button until you reach the optimal setting.

 White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset

You can adjust the color temperature for more natural picture colors.

R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the

adjusted screen.

Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button. Press

the ◄ or ► button until you reach the optimal setting.

Reset: The previously adjusted white balance will be reset to the factory defaults.

 My Colour Control: Pink/Green/Blue/White/Reset

This setting can be adjusted to suit your personal preferences.

Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.

Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button. Press

the ◄ or ► button until you reach the optimal setting.

Reset: The previously adjusted colours will be reset to the factory defaults.

 Edge Enhancement: Off/On

You can emphasize object boundaries.

 Colour Space: Auto/Wide

You can set the colour reproduction space for the input signal to Auto or Wide.

Move

Enter

Return

Mode :

Movie 

Contrast 80

Brightness 65

Sharpness 35

Colour 35

Tint G 50 R 50

Colour Tone :

Warm2 

Detailed Settings 

 More

Picture

T V

Move

Enter

Return

Black Adjust : Off 

Dynamic Contrast :

Low 

Gamma :

0 

White Balance 

My Colour Control



Edge Enhancement

: Off 

Colour Space :

Auto 

Detailed Settings

T V

BN68-01183V-00Eng.indd 20 2007-04-27 ¿ÀÈÄ 10:05:44

La page est en cours de chargement...

Samsung PS-42C96HC Manuel utilisateur

Samsung PS-42C96HC Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents