Sony SCD-XB780 Mode d'emploi

4-238-119-21(1)

Super Audio CD

Player

 2002 Sony Corporation

SCD-XB780

Operating Instructions

Mode d’emploi

Bedienungsanleitung

Manual de instrucciones

GB

FR

DE

ES

2

GB

WARNING

To prevent fire or shock

hazard, do not expose the

unit to rain or moisture.

To avoid electrical shock,

do not open the cabinet.

Refer servicing to qualified

personnel only.

To prevent fire, do not cover the ventilation

of the apparatus with news papers, table-

cloths, curtains, etc. And don’t place

lighted candles on the apparatus.

To prevent fire or shock hazard, do not

place objects filled with liquid, such as

vases, on the apparatus.

This appliance is classified as a CLASS 1

LASER product.

This label is located on the rear exterior.

The following caution label is located

inside the unit.

Don’t throw away the

battery with general house

waste, dispose of it

correctly as chemical

wastes.

Welcome!

Thank you for purchasing the Sony Super

Audio CD Player. Before operating the

unit, please read this manual thoroughly

and retain it for future reference.

About This Manual

The instructions in this manual are for

model SCD-XB780.

Conventions

• Instructions in this manual describe the

controls on the player.

You can also use the controls on the

remote if they have the same or similar

names as those on the player.

• The following icons are used in this

manual:

Indicates that you can do the

task using the remote.

Indicates hints and tips for

making the task easier.

Z

z

3

GB

Features

About the Super Audio CD

• Super Audio CD is a new high-quality audio disc

standard where music is recorded in the DSD (Direct

Stream Digital) format (conventional CDs are recorded

in the PCM format). The DSD format, using a sampling

frequency 64 times higher than that of a conventional

CD, and with 1-bit quantization, achieves both a wide

frequency range and a wide dynamic range across the

audible frequency range, and so provides music

reproduction extremely faithful to the original sound.

• The Super Audio CD has two types; a 2 channel stereo

disc and a Multi-channel disc which holds up to 6

independent channels. The multi-channel characteristic

of the Super Audio CD features a speaker allocation

system basically similar to the 5.1 channel output of

current AV systems.

Features of the player

This player is designed to play back 2-channel and multi-

channel Super Audio CDs, and conventional CDs, and

provides the following features:

• Mounted with a Discrete Dual Laser Optical Pickup,

capable of reading a Super Audio CD or conventional

CD depending on the exclusive wavelength.

• Quicker track access performance enabled by an

advanced servo mechanism.

• A Multi-Channel Management function that allows you

to adjust the multi-channel playback environment

according to the allocation and size of your speakers.

• A Super Audio D/A Converter and Direct Digital Sync

System, which allows higher-quality sound

reproduction.

Others

• A Super Audio CD can mark up to 255 track/index

numbers. This feature applies to SCD-XB780.

• The supplied remote is capable of controlling both the

SCD-XB780 and a conventional Sony CD player.

TABLE OF CONTENTS

Getting Started 4

Before You Start the Hookup 4

Hooking Up the Audio Components 5

Location and Functions of Parts 8

Front Panel Parts Descriptions 8

Rear Panel Parts Descriptions 10

Remote Parts Descriptions 11

Playing Discs 12

Compatible Disc Types 12

Playing a Disc 14

Using the Display 15

Locating a Specific Track 18

Locating a Particular Point in a Track 18

Playing Tracks Repeatedly 19

Playing Tracks in Random Order (Shuffle Play) 20

Creating Your Own Programme (Programme

Play) 21

Listening to a Multi-channel Super Audio CD

(Multi-channel management function) 22

Additional Information 25

Precautions 25

Notes on Discs 26

Troubleshooting 27

Specifications 27

Index Back cover

GB

4

GB

Getting

Started

This chapter provides information on

the supplied accessories and how to

connect various audio components to

the Super Audio CD player. Be sure

to read this chapter thoroughly before

you actually connect anything to the

player.

Before You Start the

Hookup

Checking the supplied accessories

This player comes with the following items:

• Audio connecting cord

Stereo cable (1)

• Remote commander RM-SX700 (1)

• R06 (size-AA) batteries (2)

Inserting batteries into the remote

Insert two R06 (size-AA) batteries into the battery

compartment with the + and – correctly oriented to the

markings. When using the remote, point it at the remote

sensor

on the player.

z

When to replace the batteries

Under normal conditions, the batteries should last for about six

months. When the remote no longer operates the player, replace

both batteries with new ones.

Notes

• Do not leave the remote in an extremely hot or a humid place.

• Do not drop any foreign object into the remote casing,

particularly when replacing the batteries.

• Do not use a new battery with an old one.

• Do not expose the remote sensor to direct sunlight or lighting

apparatus. Doing so may cause a malfunction.

• If you do not intend to use the remote for an extended period

of time, remove the batteries to avoid possible damage from

battery leakage and corrosion.

5

GB

Getting Started

Hooking Up the Audio Components

Connect the Super Audio CD player to an audio

component. Be sure to turn off the power of all

components before making connections and connect

securely to prevent noise.

When you have an amplifier equipped with the 5.1CH

input jacks (multi-channel amplifier, AV amplifier, etc.)

and connect the player and the amplifier via ANALOG

5.1CH OUT jacks, you can play a multi-channel Super

Audio CD and enjoy the multi-channel playback.

For normal playback, connect the player and an amplifier

via ANALOG 2CH OUT jacks.

ANALOG

L

R

2CH OUT 5.1CH OUT OUT

FRONT COAXIAL OPTICALSURR CENTER

SUB

WOOFER

DIGITAL(CD)

To CD (Super Audio

CD) IN jacks (L/R)

Stereo amplifier, etc.

Connecting via ANALOG 2CH OUT jacks

Use an audio connecting cords for this connection. Connect the

ANALOG 2CH OUT L/R jacks to the CD (Super Audio CD)

input jacks of your amplifier. Be sure to match the colour-coded

pin to the appropriate jacks: white (left) to white and red (right)

to red.

Audio connecting cords (Red and White) (supplied)

White (L)

Red (R)

White (L)

Red (R)

6

GB

Getting Started

CENTER or SUB WOOFER connection

Audio connecting cords (Black) (not supplied)

Notes

• When you make the Multi-channel connection, connect the

ANALOG 2CH OUT jacks also using another audio connecting

cord so that you can play a CD (or Super Audio CD) when you

set the input selector of your amplifier to CD (or Super Audio

CD) input .

• During playback of a conventional CD or a 2CH Super Audio

CD, the same signal that is output from the ANALOG 2CH

OUT jacks is also output from the ANALOG 5.1CH FRONT L/

R jacks.

• During playback of a Multi-channel Super Audio CD, the same

signal that is output from the ANALOG 5.1CH FRONT L/R

jacks is also output from the ANALOG 2CH OUT jacks. (The

down mixed signal of the Multi-channel signal is not played

back.)

• There are 5CH, 4CH, and 3CH Super Audio CD. When you

play these disc, the signal does not output from all the jacks of

the ANALOG 5.1CH OUT. For details of the playback, see the

cover or instructions of the Super Audio CD.

Hooking Up the Audio Components

Connecting via ANALOG 5.1CH OUT jacks

Use audio connecting cords for this connection. Connect the

ANALOG 5.1CH OUT jacks (FRONT L/R, SURR L/R, CENTER,

SUBWOOFER) to the corresponding jacks of your amplifier. For

FRONT or SURR connection, use the connecting cords (Red and

White jacks) (one audio cord is supplied with the player) and be

sure to match the colour-coded pin to the appropriate jacks:

white (left) to white and red (right) to red. For CENTER and SUB

WOOFER connection, use the connecting cords (Black) (not

supplied).

FRONT or SURR connection

Audio connecting cords (Red and White) (one audio cord is

supplied with the player)

ANALOG

L

R

2CH OUT 5.1CH OUT OUT

FRONT COAXIAL OPTICALSURR CENTER

SUB

WOOFER

DIGITAL(CD)

To FRONT IN

jacks (L/R)

To SURROUND or

REAR IN jacks

(L/R)

To CENTER IN

jack

To SUB WOOFER

IN jack

Multi-channel amplifier,

AV amplifier, etc.

White (L)

Red (R)

White (L)

Red (R)

Black

7

GB

Getting Started

Connecting via DIGITAL (CD) OUT COAXIAL

connector

Use a coaxial digital cable to connect the audio components

equipped with coaxial digital input connectors.

Coaxial digital cable (not supplied)

Connecting via DIGITAL (CD) OUT OPTICAL

connector

Use an optical digital cable for this connection. When connecting

the optical digital cable to the DIGITAL (CD) OUT OPTICAL

connector, take the cap off the connectors and push the cable

plugs in until they click into place.

Be careful not to bend or twist the optical cable.

Optical digital cable (not supplied)

ANALOG

L

R

2CH OUT 5.1CH OUT OUT

FRONT COAXIAL OPTICALSURR CENTER

SUB

WOOFER

DIGITAL(CD)

ANALOG

L

R

2CH OUT 5.1CH OUT OUT

FRONT COAXIAL OPTICALSURR CENTER

SUB

WOOFER

DIGITAL(CD)

To CD (Super Audio

CD) IN coaxial digital

jack

Stereo amplifier,

etc.

To CD (Super Audio

CD) IN optical digital

jack

Stereo amplifier,

etc.

Note

Only the audio signals of conventional CDs can be output from

the DIGITAL (CD) OUT connectors. Those of the Super Audio

CD cannot be output through DIGITAL (CD) OUT.

Note

Only the audio signals of conventional CDs can be output from

the DIGITAL (CD) OUT connectors. Those of the Super Audio

CD cannot be output through DIGITAL (CD) OUT.

Connecting the AC power cord

Connect the AC power cord to a wall outlet.

8

GB

Location and

Functions of

Parts

This chapter tells you about the

location and functions of the various

buttons and controls on the front and

rear panels and the supplied remote.

Further details are provided on the

pages indicated in parentheses.

It also tells you about the information

that appears in the display window.

Front Panel Parts

Descriptions

1 POWER switch (14)

Press to turn on the player.

2 TIME/TEXT button (15)

Each time you press the button, the playing time of the

track, the total remaining time on the disc, or TEXT

information appears in the display.

3 SACD/CD button (13)

Each time you press the button while playing back a

hybrid disc, the layer to be played back switches

between the HD (Super Audio CD) layer and the CD

layer.

4 Disc tray (14)

Press A OPEN/CLOSE to open/close the disc tray.

5 Multi-channel indicator

Turns on when you turn on the player, or when the

Multi-channel Super Audio CD is loaded and select

the Multi-channel playback area by pressing MULTI/

2CH.

9

GB

Location and Functions of Parts

6 A OPEN/CLOSE button (14)

Press to open the disc tray.

7 H button (14)

Press to start play.

8 X button (14)

Press to pause play.

9 x button (14)

Press to stop play.

0 l AMS L dial (AMS: Automatic Music Sensor)

(14)

When you turn the l AMS L dial

counterclockwise by one click, you go back to the

preceding track; when you turn the l AMS L

dial clockwise by one click, you go to the succeeding

track.

qa PHONES

Connect the headphones.

During playback of a Multi-channel Super Audio CD,

the same signal that is output from the ANALOG

5.1CH FRONT L/R jacks is output from the PHONES

jack.

qs PHONE LEVEL

Adjust the headphones volume.

qd MENU (13)

Press to enter the menu.

Press to exit from the menu and return to the normal

display.

qf MULTI/2CH button (12)

Press to select the playback area when the 2 channel +

Multi-channel Super Audio CD (page 13) is loaded.

qg Display window (15)

Shows various information.

qh m/M buttons (18)

Press to locate a portion you want to play within a

track.

PHONES

POWER

PHONE LEVEL

MIN MAX

PUSH ENTER

AMS

TIME/TEXT SACD/CD

MENU MULTI/2CH

OPEN CLOSE

10

GB

Location and Functions of Parts

Rear Panel Parts Descriptions

1 ANALOG 2CH OUT L/R jacks (6)

Connect to an audio component (stereo/2 channel)

using the audio connecting cord.

2 ANALOG 5.1CH OUT jacks (5)

Connect to an amplifier equipped with the 5.1CH

input jacks (Multi-channel amplifier, AV amplifier,

etc.) using the audio connecting cords.

3 DIGITAL (CD) OUT COAXIAL connector (7)

Connect to an audio component using the coaxial

digital cable.

4 DIGITAL (CD) OUT OPTICAL connector (7)

Connect to an audio component using an optical

digital cable.

ANALOG

L

R

2CH OUT 5.1CH OUT OUT

FRONT COAXIAL OPTICALSURR CENTER

SUB

WOOFER

DIGITAL(CD)

Note

Only the audio signals of the CD can be output from the

DIGITAL (CD) OUT connectors shown in 3 and 4. Those of the

Super Audio CD cannot be output through DIGITAL (CD) OUT.

11

GB

Location and Functions of Parts

Remote Parts Descriptions

CONTINUE SHUFFLE

PLAY MODE

PROGRAM

SACD/CD

123

456

78

10/0

9

TIME/TEXT

REPEAT

AMS

BA

CLEAR

>10 ENTER

MODE

DISPLAY/

MULTI/2CH

INDEX

LEVEL

ADJ

CHECK

1 CONTINUE button (20)

Press to resume normal play from Shuffle Play or

Programme Play.

SHUFFLE button (20)

Press to select Shuffle Play.

PROGRAM button (21)

Press to select Programme Play.

2 DISPLAY MODE button (16)

Press to turn off the information.

3 TIME/TEXT button (15)

Each time you press the button, the playing time of the

track, the total remaining time on the disc, or TEXT

information appears in the display.

4 Number buttons (18)

Press to enter the track numbers.

5

i

10 button (18)

Press to locate a track numbered over 10.

6 REPEAT button (19)

Press repeatedly to play all tracks or only one track on

the disc.

7 AyB button (20)

Press to select Repeat A-B Play.

8 H button (14)

Press to start play.

X button (14)

Press to pause play.

x button (14)

Press to stop play.

9 AMS ./> (AMS: Automatic Music Sensor)

buttons (18)

Press to locate a specific track.

0 m/M buttons (18)

Press to locate a portion you want to play within a

track.

qa INDEX >/. buttons (18)

Press to locate a specific point marked with an index

signal when you play a disc that has index signals.

qs SACD/CD button (13)

Each time you press the button while playing back a

hybrid disc, the layer to be played back switches

between the HD (Super Audio CD) layer and the CD

layer.

qd MULTI/2CH button (12)

Press to select the playback area when the 2 channel +

Multi-channel Super Audio CD (page 13) is loaded.

qf ENTER button (24)

Press to decide the selection.

qg CLEAR button (21)

Press to delete a programmed track number.

qh LEVEL ADJ button (24)

Press to adjust the output level balance for the Multi-

channel management function (page 22).

qj CHECK button (21)

Press to check the programmed order.

12

GB

Compatible Disc Types

You can play the following discs with this player.

Depending on the type of disc to be played, select the

appropriate indicator by pressing SACD/CD or MULTI/

2CH (pages 14).

Classification by the layer configuration

Super Audio CD (single layer disc)

This disc consists of a single HD (high density) layer.

When you play this disc, the player is set to the Super

Audio CD playback mode automatically.

Super Audio CD (dual layer disc)

This disc consists of dual HD layers and is capable of

extended play over long periods.

When you play this disc, the player is set to the Super

Audio CD playback mode automatically.

Also, as the dual layer disc consists of dual HD layers on

one side only, it is not necessary to turn the disc over.

Conventional CD

This disc is the standard format.

When you play this disc, the player is set to the

Conventional CD playback mode automatically.

HD (Super Audio CD)

layer

HD (Super Audio CD)

layer

HD (Super Audio CD)

layer

CD layer

Playing Discs

This chapter explains the various

ways to play discs.

Playing Discs

13

GB

Super Audio CD + CD (Hybrid disc)

This disc consists of an HD layer and a CD layer. Press

SACD/CD to select the layer you want to listen to. Also,

as the dual layers are on one side, it is not necessary to

turn the disc over. You can play the CD layer using a

conventional CD player.

You can select the default playback layer (HD layer or CD

layer).

1 During stop mode, press MENU.

2 Turn l AMS L until “SACD/CD SEL” appears in

the display.

3 Press l AMS L.

The current playback layer appears.

4 Turn l AMS L to select desired playback

layer, then press l AMS L.

Classification by the channel

configuration of the Super Audio CD

2 channel Super Audio CD

This disc consists of the 2 channel playback area.

When you play this disc, the player is set to the 2 channel

playback mode automatically.

Multi-channel Super Audio CD

This disc consists of the multi-channel playback area.

When you play this disc, the player is set to the multi-

channel playback mode automatically.

2 channel playback area

Multi-channel playback

area

2 channel + Multi-channel Super Audio CD

This disc consists of the 2 channel playback area and the

multi-channel playback area.

Press MULTI/2CH to select the playback area you want to

listen to.

You can select the default playback area (2 channel

playback or multi-channel playback area).

1 During stop mode, press MENU.

2 Turn l AMS L until “M/2CH SELECT” appears

in the display.

3 Press l AMS L.

The current playback area appears.

4 Turn l AMS L to select desired playback area,

then press l AMS L.

Incompatible Discs

This player cannot play the following discs. If you try to

play them, the error message “TOC Error” or “NO DISC”

will appear or there will be no sound.

• CD-ROM

• DVD, etc.

2 channel playback area

Multi-channel playback

area

CD layer

HD (Super Audio CD)

layer

Playing Discs

14

GB

Playing a Disc

The operations for normal play and the basic operations

during play are explained below.

1 Turn on the amplifier. Turn down the volume level

to the lowest.

2 Select the player position using the input selector

on the amplifier.

3 Press POWER to turn on the player.

4 Press A OPEN/CLOSE to open the disc tray, and

place a disc on the tray.

5 Press H.

Playback starts from the first track. If you want to start

playing from a specific track, turn lAMSL to

select the track number before pressing H.

6 Adjust the volume on the amplifier.

SACD/CD

lAMSL

POWER

A OPEN/CLOSE

H

Xx

With the label side up

z

If you turn on the player when a disc is already loaded

Playback starts automatically. If you connect a commercially

available timer, you can set it to start playing the disc at any time

you want.

z

To select a layer you want to listen to when playing a hybrid

disc (page 13)

After you stop play using x, press SACD/CD repeatedly to light

either the “SACD” or “CD.”

z

To select a playback area you want to listen to when playing

a 2 channel + Multi-channel Super Audio CD (page 13)

After you stop play using x, press MULTI/2CH repeatedly to

light either the “MULTI CH” or “2 CH.”

Note

During playback, increase the volume level gradually starting

from the lowest level. The output from this unit may contain band

width that are out of the normal listening range. This may cause

damage to the speakers or ears.

To

Stop play

Pause play

Resume play after pausing

Locate a succeeding track

Locate the beginning of the

current track or a preceding

track

Eject the disc

Press

x

X

X or H

Turn lAMSL clockwise.

When using the remote, press

>.

Turn lAMSL

counterclockwise. When using

the remote, press ..

A OPEN/CLOSE

Basic operations during play

Playing Discs

15

GB

Using the Display

The display window shows various information about the

disc or track being played. This section describes the

current disc information and information that appears for

each play status.

TIME/TEXT

DISPLAY MODE

lAMSL

MENU

CD

12345

678910

or

Disc information when a disc is loaded

Depending on the disc that is currently loaded, the

display shows as follows:

2 channel Super Audio CD

Multi-channel Super Audio CD

Conventional CD

or

SACD

2CH

12345

678910

SACD

MULTI 5.1CH

12345

678910

SACD

MULTI 5 CH

12345

678910

SACD

MULTI CH

12345

678910

During playback

a 5.1 channel

Super Audio CD

During playback

a 5 channel

Super Audio CD

During

playback

other Super

Audio CDs or

during stop

mode

Displaying information while the player is

stopped

Press TIME/TEXT.

The display shows the total number of tracks and total

playing time,.

Total playing time

Total number of tracks

10 45.28

SACD

MULTI CH

TRACK MIN SEC

12345

678910

TIME/TEXT

Playing Discs

16

GB

1 1 1.57

SACD

MULTI 5.1CH

TRACK INDEX MIN SEC

12345

678910

1 -1.56

SACD

MULTI 5.1CH

TRACK MIN SEC

12345

678910

-43.32

SACD

MULTI 5.1CH

MIN SEC

12345

678910

[MULTI] 5.1 CH

SACD

MULTI 5.1CH

TRACK

12345

678910

SONYHITS

SACD

MULTI CH

TEXT

DISC

12345

678910

10 45.28

SACD

MULTI CH

TEXT

TRACK MIN SEC

12345

678910

SONY BAND

SACD

ART.

MULTI CH

TEXT

12345

678910

Displaying information while the player is

playing

Press TIME/TEXT.

Each time you press the button, the current track number

and its elapsed time or remaining time appears, or the

total remaining time for the disc appears in the display.

When the player detects a Multi-channel Super Audio

CD, the channel information appears before the default

display appears.

Turning off the information in the display

Z

Each time you press DISPLAY MODE on the remote while

playing a disc, the display turns off and on alternately.

Even when the display is turned off, the display turns on

if you pause or stop play. When you resume play, the

display turns off again.

Before you start playing, when you press DISPLAY

MODE to turn off the display, “DISPLAY OFF” appears,

and when you press the button to turn on the display,

“DISPLAY ON” appears.

Playing track number and elapsed playing time of

the current track (default display)

Press TIME/TEXT

Playing track number and remaining time of

the current track

Total remaining time on the disc

Press TIME/TEXT

Channel information (appears only when the player

detects a Multi-channel Super Audio CD)

Using the Display

Displaying the information of a TEXT disc

TEXT discs contain information, such as the disc name or

artist name, as well as the audio signals. This player can

display the disc name, artist name, and current track

name as TEXT information.

When the player detects a TEXT disc, “TEXT” appears in

the display. If your TEXT disc has several languages,

“MULTI-TEXT” appears in the display. When you want to

check the information in another language, see

“Displaying the information of a TEXT disc in other

languages” on page 17.

Displaying the information of a TEXT disc

in stop mode

Press TIME/TEXT.

Each time you press the button, the disc name or artist

name appears in the display. When you select the artist

name, “ART.” appears in the display.

• Before you start playing

Disc title

Artist name

Total number of tracks and total playing time

Press TIME/TEXT

Press

TIME/

TEXT

Playing Discs

17

GB

HITECHBLUES

SACD

MULTI 5.1CH

TEXT

TRACK

12345

678910

1 -1.57

SACD

MULTI 5.1CH

TEXT

TRACK MIN SEC

12345

678910

-43.32

SACD

MULTI 5.1CH

TEXT

MIN SEC

12345

678910

1 1 1.56

SACD

MULTI 5.1CH

TEXT

TRACK INDEX MIN SEC

12345

678910

[MULTI] 5.1 CH

SACD

MULTI 5.1CH

TEXT

TRACK

12345

678910

Display information of a TEXT disc while

playing a disc

The current track name appears. If the disc name has

more than 15 characters, the first 14 characters will remain

after the name scrolls by in the display.

When the player detects a Multi-channel Super Audio

CD, the channel information appears before the playing

time of the current track appears.

• While playing a disc

Notes

• The display may not show all the characters, depending on the

disc.

• This player can display only the disc name, artist name, and

track names from TEXT discs. Other information cannot be

displayed.

Remaining time on the current track

Remaining time on the disc

Playing time of the current track

Track title

Press TIME/TEXT

Press

TIME/

TEXT

Press TIME/TEXT

Channel information (appears only when the player

detects a Multi-channel Super Audio CD)

Displaying the information of a TEXT disc

in other languages

You can change the displayed language if the TEXT disc

has multi language capacity. When the player detects such

a TEXT disc, “MULTI-TEXT” appears in the display.

Change the language according to the procedures below.

1 Press MENU in stop mode.

2 Turn l AMS L until “LANGUAGE” appears in

the display.

3 Press l AMS L.

The current selected language (English, French,

German, etc.) flashes.

If the player cannot display the language used in a

TEXT disc, “Other Lang” appears in the display.

4 Turn l AMS L until the desired language

appears in the display.

5 Press l AMS L.

After a few seconds, the information appears in the

selected language.

Playing Discs

18

GB

Locating a Specific Track

During stop or play mode, you can locate any track to be

played.

lAMSL

Number

buttons

./>

>10

To locate

The next or

succeeding tracks

The current or

preceding tracks

A specific track directly

You need to

Turn l AMS L clockwise until

you find the track. When using the

remote, press > repeatedly until you

find the track.

Turn l AMS L counterclockwise

until you find the track. When using the

remote, press . repeatedly until you

find the track.

Turn l AMS L until you find the

track number you want. When using

the remote, press . or >

repeatedly until you find the track.

Locating a track directly by entering the

track number Z

Press the number button(s) to enter the track number.

z

To enter a track number over 11 Z

1 Press >10.

2 Enter the corresponding digits.

To enter 0, press 10/0 instead.

Examples:

• To play track number 30, press >10, then 3 and 10/0.

• To play track number 100, press >10 twice, then 1, and 10/0

twice.

Locating a Particular Point

in a Track

You can locate a particular point in a track during play or

play pause.

Locating a point while monitoring the

sound (Search)

Press and hold m/M during play.

You will hear intermittent playback as the disc goes

forward or reverses.

When you reach the desired point, release the button.

Locating a point by observing the time

indication (High-Speed Search)

Press and hold m/M during play pause.

You will not hear the playback sound.

z

When “Over!!” appears in the display

The disc has reached its end. Press . or m to go back.

Note

Tracks that are only a few seconds long may be too short for

monitoring. In this case, the player may not search correctly.

Locating a point using the index function

(Index Search) Z

Press INDEX. or INDEX> repeatedly in play or

pause mode.

z

What is an INDEX?

Some Super Audio CD or CD are provided with an index

marking system which divides tracks or discs into smaller

segments. This is especially useful when you want to locate a

certain point within a long track (in classical music for example).

The index search function works only when you use a

commercially available indexed discs (usually indicated on the

label).

./>

m/M

INDEX

>/.

lAMSL

m/M

Playing Discs

19

GB

Locating a point by setting the start time

(Time Search)

1 Press ./> (or turn l AMS L) to select

the desired track in stop mode.

2 Press and hold m/M to set the time to start play

while looking at the display.

You can set the time from the beginning of the desired

a track when you press M at first, and set the time

from the end of the desired track backward’s when

you press m at first.

2 Press H.

Play will start at the time search.

5 2.57

SACD

MULTI 5.1CH

TRACK MIN SEC

12345

678910

The player repeats

All the tracks in sequence

All the tracks in random order

All the tracks in the programme in

sequence

Playing Tracks Repeatedly

Z

You can play an entire disc or portions thereof repeatedly.

This function can be used with Shuffle Play to repeat all

the tracks in random order (page 20), or with Programme

Play to repeat all the tracks in a programme (page 21).

You can also repeat a specific track or portion within a

track.

Note

If you turn off the player or disconnect the mains lead, the player

will store the last setting of repeat play (“Repeat All” or “Repeat

1”) and recall it the next time you turn on the player. However,

the setting of the Repeat A-B Play will be cancelled if you turn off

the player or disconnect the mains lead.

Repeating all the tracks on the disc

(Repeat All Play)

Press REPEAT once, then press H.

“REPEAT” appears in the display and Repeat All Play

starts.

The repeat play changes depending on the play mode you

select.

When the play mode is

Normal play (page 14)

Shuffle Play (page 20)

Programme Play (page 21)

To cancel Repeat All Play

Press REPEAT repeatedly until “REPEAT” goes off.

H

AyB

x

REPEAT

Playing Discs

20

GB

Repeating the current track

(Repeat 1 Play)

While the track you want to repeat is being played,

press REPEAT repeatedly until “REPEAT 1” appears in

the display.

Repeat 1 Play starts.

To cancel Repeat 1 Play

Press REPEAT repeatedly until “REPEAT 1” goes off.

Repeating a specific portion within a

track (Repeat A-B Play)

You can specify one portion within a track to be played

repeatedly. Note that the portion that you specify must be

within the boundaries of a single track.

1 While the player is playing, press AyB at the

starting point (point A) of the portion to be played

repeatedly.

“REPEAT” appears and “A” flashes in the display.

2 Continue playing the track (or press M) to locate

the ending point (point B), then press AyB.

“REPEAT A-B” appears and Repeat A-B Play starts.

To cancel Repeat A-B Play

Press REPEAT.

z

You can set a new starting point and ending point during

Repeat A-B Play

You can change the current ending point to a new starting point,

then specify a new ending point to repeat another portion right

after the current portion.

1 During Repeat A-B Play, press AyB.

The current ending point changes to the new starting point

(point A).

“REPEAT” lights up and “A” flashes in the display.

2 Locate the new ending point (point B) and press AyB.

“REPEAT A-B” lights up and the player starts to repeat the

newly specified portion.

When you want to restart from the starting point A, press H

during AyB repeat.

Playing Tracks Repeatedly Z

Playing Tracks in Random

Order (Shuffle Play) Z

When you select Shuffle Play, the player plays all the

tracks on the disc in random order.

1 Press SHUFFLE in stop mode.

2 Press H.

Shuffle Play starts.

“;” appears while the player is “shuffling” the tracks.

The player will stop after playing all the tracks once.

To resume normal play

Press CONTINUE.

z

You can locate tracks during Shuffle Play

Press ./>.

Press > to locate the next track or press . to locate the

beginning of the current track. The player does not go back to

tracks which have already been played.

H

CONTINUE

SHUFFLE

./>

La page charge ...

Sony SCD-XB780 Mode d'emploi

Sony SCD-XB780 Mode d'emploi

dans d''autres langues

Documents connexes