Motorola IHDT6JN1 Manuel utilisateur

Quick Start Guide

motorola S605

Temp Page - To be discarded before printing

use this template with A7MotoQSG StructApps

Gorillaz Bluetooth

Stereo Clip with FM

Quick Start Guide

DRAFT 3 - 03/10/08

2

welcome

Ultra light weight and elegantly simple, the Motorola

S605 Bluetooth stereo clip headset makes it so easy to

go hands-free with music and calls. The headset

empowers you to listen to wireless streaming music or

FM radio AND take calls… all in crystal clear sound.

Note:

Before using your device for the first time, be sure

to review the important safety and legal pamphlet and

follow instructions. Periodically review this information so

you remember how to safely use your speaker.

3

before you begin

Take a moment before you get started to familiarize

yourself with the components of your stereo clip.

Forward

Button

Volume Down

Button

Volume Up

Button

Call Button

Micro-

phone

3.5mm

Headphone Jack

Status

Indicator Light

Charger Port

(on side)

Reverse

Button

Play/Pause

Button

Power/Lock

Switch (on side)

Music Mode

Button

4

charge it

cha rge i t

You’ll need to charge your stereo clip’s battery for a

minimum of 1 hour using the included charger.

1

Plug the charger into the charging port on your

stereo clip, as shown.

The status indicator light turns red or yellow when

battery is charging. When the stereo clip’s battery is

fully charged, the indicator light turns green.

2

Disconnect the charger.

Note:

Stereo clip is not functional during charging.

Note:

This product uses a lithium ion, rechargeable,

non-replaceable battery. Under normal use, the expected

life of the rechargeable battery is approximately [xxx]

charges.

5

turn it on & off

To turn your stereo clip on and off

, slide and hold the

Power switch to

ë

position for 3 seconds. The status

indicator light flashes blue three times.

To turn off your stereo clip, also slide and hold the Power

switch to

ë

position for 3 seconds.The status indicator

light flashes three times and the stereo clip turns off.

6

connect headphones

Your stereo clip comes with 3.5mm headphones. To

utilize these or your own favorite headphones, connect

them to the 3.5mm headphone jack.

7

connect wirelessly

To listen to your music via Bluetooth wireless

connection

, as well as make and receive handsfree

calls, you need to pair (link) it with your stereo clip with

your Bluetooth phone and/or music device.

1

Turn off any Bluetooth devices previously paired with

stereo clip.

2

Turn on the Bluetooth feature on your Bluetooth

phone or music player.

3

Turn on your stereo clip.

The status indicator light is steadily lit in blue to

indicate the stereo clip is in discoverable mode.

4

Place phone or music device in Bluetooth search

mode.

The phone or music device searches for your stereo

clip.

5

Select

Motorola S605

from search results on your

phone or music device.

6

Select

OK

or

Ye s

to pair your stereo clip with your

phone or music device.

7

If prompted, enter

0000

for passkey.

8

connect wirelessly

When your stereo clip successfully pairs and connects

with your phone or music device, the status indicator

light flashes blue and purple. Music playing from your

connected music source is heard on your stereo clip.

Once connected, the status indicator light provides

current Bluetooth connection status as shown below.

After you have successfully paired your stereo clip and

Bluetooth device, you don't need to repeat these steps.

For each use, ensure that your stereo clip is turned ON

and that your device's Bluetooth feature is ON.

Indicator Light

(Flashing) Wireless Connect Status

both handsfree phone (HFP) and

streaming music (A2DP)

connections are active

only streaming music (A2DP)

connection is active

only handsfree phone (HFP)

connection is active

9

control your tunes

Playback controls provided on your stereo clip can be

used when listening to wireless music streaming from a

Bluetooth-enabled music device that also provides

remote control capabilities (AVRCP).

When remote control capabilities are not supported,

music should be controlled from your music player.

Press -- change between wireless music and FM radio

Press -- skip to next track

Press and hold --

fast-forward track

Press -- skip to previous track

Press and hold -- rewind track

Press --

play/pause

music

Press and hold

-- stop music

Press -- adjust

volume up/down one

step

Press and hold --

adjust volume

up/down

continuously

10

listen to radio

To listen to FM radio, press the Music Mode button. The

status indicator light slowly flashes in purple.

Press -- change between wireless music and FM radio

Press and hold -- store current station

Press --scan frequency up

Press and hold -- skip forward to

next stored station

Press -- scan frequency down

Press and hold -- skip back to

previous stored station

Press -- adjust volume up/down

one step

Press and hold -- adjust volume

up/down continuously

11

handsfree calls

To make and receive calls using the stereo clip, a

Bluetooth handsfree (HFP) connection must be

established with your phone (see “connect wirelessly”

on page 7 for details).

You’ll use these controls and indicators on your stereo

clip are used when making and receiving handsfree calls.

Call button

Volume buttons

Play/Pause button

12

receiving calls

When there’s an incoming call, the status indicator light

flashes quickly in blue on your stereo clip and you hear

ringing. If music is playing when a call is received, the

music either automatically pauses or mutes depending

on your music player and connection setup. If FM radio is

playing when call is received, radio audio is muted.

Press -- answer

incoming call

Press and hold (either)

-- reject call

13

during calls

When a call is active, the status indicator light slowly

pulses in blue on your stereo clip.

Press -- end call

Press -- adjust volume

up/down one step

Press and hold-- adjust

volume up/down

continuously

Press -- mute call

(status indicator

flashes when mute)

14

during calls

When there’s a second incoming call, the status indicator

light flashes quickly in blue on your stereo clip and you

hear ringing.

Press --

1) answer second

incoming call

2) end active call

(resume call on hold)

3) resume call on hold

(when remote caller

hangs up)

Press and hold -- reject

secon incoming call

15

making calls

To make a call, you can redial the last dialed number or

make a voice dial call (if your phone supports this

feature). When making a voice dial call, the microphone

on the stereo clip is enabled and you hear a prompt from

your phone.

Press -- adjust volume

up/down one step

Press and hold -- adjust

volume up/down

continuously

Press -- make a voice dial

call (you hear a prompt

from your phone)

Press and hold -- redial

last number

16

check battery

check batter y

To check your stereo clip’s battery charge level

, press

and hold both Volume buttons until you hear a tone. The

status indicator light displays charge status as shown

below.

When your stereo clip is in a low battery charge state,

the status indicator light flashes quickly in red and a tone

is repeated every minute.

Main Indicator Light Battery Charge Status

Red Less than 10% charge

Yellow Between 10% and 80%

charge

Green More than 80% charge

17

wireless status

The status indicator light on your stereo clip displays

current status of Bluetooth wireless connection(s) to

your phone and/or music device.

Main Indicator Light Wireless Status

steady blue Bluetooth discoverable mode

long blue flash standby (handsfree

connection only)

long yellow flash standby (streaming music

connection only)

long green flash standby (both handsfree and

streaming music connection)

quick blue flash incoming/outgoing call

long blue pulse connected on a call

long purple pulse connected call muted / FM

radio on (when not on a call)

three yellow flashes started music player

slow red flash idle (not connected to device)

18

manage your wires

While using your stereo clip, notches are provided to

hang your headphones without needing to wind the cord,

as shown.

1

2

19

manage your wires

You can also use the notches when storing your stereo

clip and headphones, as shown.

1

2

La page est en cours de chargement...

Motorola IHDT6JN1 Manuel utilisateur

Ce manuel convient également à

Motorola IHDT6JN1 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents