Beurer IPL 7500 SatinSkin Pro Le manuel du propriétaire

ENGLISH

IPL 7500 Permanent hair reduction

Instruction manual ........................ 3

ESPAÑOL

IPL 7500 Reducción permanente

del vello

Manual de instrucciones ............ 21

FRANÇAIS

IPL 7500 Réduction permanente de

la pilosité

Mode d’emploi ............................ 41

IPL 7500

Distributed by/Distribuido por/

Distribué par :

Beurer North America LP

900 N Federal Highway, Suite 300

Hallandale Beach, FL 33009

www.beurer.com

Questions or comments?

Call toll free 1-800-536-0366 or contact info@beurer.com

¿Preguntas o comentarios? Llame gratis al

1-800-536-0366 o póngase en contacto info@beurer.com

Questions ou commentaires? Appeler gratuitement

1-800-536-0366 ou communiquez avec info@beurer.com

READ THIS MANUAL COMPLETELY AND CAREFULLY BEFORE USING THIS PRODUCT

Keep this manual in a safe location for future reference

LEA TODO ESTE MANUAL CON ATENCIÓN ANTES DE USAR ESTE PRODUCTO

Conserve este manual en un lugar seguro para consultarlo en el futuro

LISEZ CE MODE D’EMPLOI COMPLÈTEMENT ET ATTENTIVEMENT AVANT

D’UTILISER CE PRODUIT

Conservez ce manuel en lieu sûr pour y faire référence ultérieurement

3

1. IMPORTANT SAFETY NOTES

Signs and symbols

The following signs appear in the Safety Section (page 4)

and in this manual on pages 7, 10, 13 and 14.

ENGLISH

WARNING WARNING indicates a hazardous

situation which, if not avoided, could

result in death or serious injury.

CAUTION CAUTION indicates a hazardous situa-

tion which, if not avoided, may result

in minor or moderate injury.

NOTICE NOTICE addresses practices not

related to personal injury, such as

product and/or property damage.

Contents

1. IMPORTANT SAFETY NOTES ....................................... 3

2. Important information ................................................... 5

3. Introduction.................................................................... 6

How IPL (intense pulsed light) technology works ......... 6

Long-term hair reduction ............................................... 6

4. Parts and Controls ........................................................ 7

Who can use the device ................................................ 9

Who cannot use the device ........................................... 9

Possible side effects ................................................... 10

Benefits ....................................................................... 11

5. To Set Up ...................................................................... 12

Preparing Skin for Treatment ....................................... 12

Preliminary Test ........................................................... 13

Treating the Skin .......................................................... 13

Recommended Treatment Schedule ........................... 14

What to expect when using the device ....................... 15

After Treatment ............................................................ 16

6. Care and Maintenance ................................................ 16

7. Troubleshooting ........................................................... 16

8. Specifications .............................................................. 17

9. Storage ......................................................................... 17

10. FCC Statement .......................................................... 17

11. Warranty ..................................................................... 18

4

READ THIS ENTIRE MANUAL, THE SAFETY SECTION

AND ALL INSTRUCTIONS AND WARNINGS COMPLETE-

LY AND CAREFULLY BEFORE USING THIS PRODUCT.

FOLLOW ALL SAFETY INSTRUCTIONS AND WARNINGS

TO AVOID HAZARDOUS SITUATIONS AND TO MAKE

CORRECT USE OF THIS PRODUCT.

WARNING

To reduce the risk of fire, electric shock, or serious

personal injury:

•

Do not open or repair the device as it may expose you

to dangerous electrical components which may cause

serious bodily damage.

•

Do not place, store or use the device near bathtubs,

showers, basins or other vessels containing water.

•

Do not leave the device unattended while plugged in.

•

Never look directly at the light coming from the device

applicator and lamp.

•

Never use flammable liquids such as alcohol (including

perfumes, sanitizers, or other applications containing

alcohol) or acetone to clean the skin one hour before

using the device.

•

Do not use the device if you have an active implant

such as a pacemaker, insulin pumps, or similar de-

vices.

•

Do not use the device on tanned skin

or after sun exposure. Avoid exposure

to the sun for four weeks before using

this device.

•

Do not use the device on naturally dark skin (see guid-

ance at the back cover and high Fitzpatrick level in the

“Who should use the device” section).

•

Do not use the device if you have dark brown or black

spots such as freckles, birth marks, around the nip-

ples, moles or blisters on the area to be treated.

•

Do not use the device on mucous membranes such

as nostrils, lips, eyelids, ears, genital areas or anus.

•

Remove all piercings or metal items such as earrings

or jewelry before treatment.

•

Do not use the device on tattoos or permanent make-

up.

CAUTION

To reduce the risk of personal injury or product/

property damage:

•

Use the device only according to the instructions for use.

•

Hair removal by lasers or intense pulsed light sources can

cause increased hair growth in some individuals. Based

upon currently available data, the highest risk group for

5

this response is females of Mediterranean, Middle East-

ern, and South Asian heritage treated on the face and

neck.

•

This appliance is not intended for use by persons with re-

duced physical, sensory or mental capabilities.

•

Do not use the device if:

•

The device is not working properly, appears damaged or

broken (UV and IR emitted from this device)

•

The cord or plug are damaged

•

You see or smell smoke

•

The outer shell is damaged or loose

•

Lamp or Treatment Window is damaged/missing

•

Optical skin tone is cracked, or broken

•

Becomes damp or wet.

•

Avoid more than 15 minutes of sun exposure for at least

2 weeks post treatment. If during these 2 weeks your

treated skin area is exposed to sunlight, make sure to

apply SPF 30 or higher sunscreens.

•

Do not treat the same area of skin more than once per

treatment as it may cause skin irritation.

•

Use the device only with its original power supply. For

your safety, never use DC adapters which are not ap-

proved by the manufacturer.

•

This device is intended for one individual’s use only.

To help prevent transmitting diseases between users,

do not let others use the device.

•

If you have undergone any other aesthetic procedure

or any other uncertainty regarding potential side ef-

fects, consult your physician before using the IPL

7500.

2. Important information

Signs and symbols

The following symbols are used in these instructions for

use, on the packaging and on the type plate for the device

and accessories:

Caution

Note

Note on important information

Follow instructions for use

6

Type BF applied part

Device in protection class 2

Device protected against foreign objects ≥

12.5 mm and against falling drops of water

14°F

(-10°C)

158°F

(70°C)

90%

0%

Storage

Permissible storage temperature and hu-

midity

Operating

50°F

(10°C)

104°F

(40°C)

70%

30%

Permissible operating temperature and

humidity

Keep away from eyes

Do not use the IPL 7500 device on tanned

skin or after sun exposure

Please dispose of the device in accord-

ance with EC Directive – WEEE (Waste

Electrical and Electronic Equipment).

Keep dry / Protect from moisture / Keep

away from showers, basins or other ves-

sels containing water.

Use device only with its original power

supply. For your safety, never use DC

adapters which are not approved by the

manufacturer

3. Introduction

The device is an over-the-counter device designed to re-

move unwanted hair and permanently reduce regrowth as

measured at 6, 9, and 12 months after treatment ends.

How IPL (intense pulsed light) technology

works

The device is based on the principle of selective photo-

thermolysis. IPL uses a combination of Intense Pulsed Light

(IPL) technology and unique skin condition sensors. The

light pulse is absorbed by the melanin in the hair shaft,

causing local thermal damage which results in a reduc-

tion in hair growth.

Long-term hair reduction

The hair growth cycle consists of three phases: anagen,

catagen, and telogen. Anagen is the growth phase, while

7

catagen and telogen are resting phases. Permanent hair

reduction can only occur during anagen.

Skin types are depicted on the Fitzpatrick scale below. Dark-

er skin contains more melanin, which competes with melanin

in the targeted hair for energy absorption. When more light

energy is absorbed into the skin, there is a greater risk of

adverse effects and epidermis damage. This device is only

recommended for use on skin types I through IV.

WARNING

•

Read this user guide completely before starting treat-

ment with the device.

4. Parts and Controls

123

1

3

4

5

6

8

7

2

1 Light area/treatment window/lamp

2 Skin color sensor/skin contact sensor

3 Intensity display (3 levels)

4 ON/ OFF power/ energy selection button

5 Indicator lamp (indicating lack of contact/not al-

lowed skin tone/device not usable)

I II III IV V

X

VI

X

8

6 Socket for device plug

7 Mains adapter

8 Trigger button

ON/ OFF power/ energy selection button

•

P

ress the ON/ OFF power/ energy selection button (after

the device is connected to the power supply) to activate

device at Level 1. Each press will increase the energy

level from 1 through 3.

•

P

ress and hold the ON/ OFF power/ energy selection

button for three seconds to shut the device off. The de-

vice will also shut off by itself if not touched for 180

seconds.

The Trigger button (flash pulse activation) activates the flash

lamp as long as the treatment window is in full contact with

the skin and the skin tone is in the allowed range. Press the

trigger button once to emit a single pulse; press and hold

the trigger button for continuous pulses.

Indicator Mode Description

No light OFF Device not working (not

connected to the power

supply)

Blinking

green light

Standby Device is in standby mode

(when first powering on

or when no buttons are

pressed for 3 minutes)

Green

energy

level LEDs

(1 -3)

Energy

level 1-3

The three energy levels are

indicated by three green

LEDs.

Steady

green light

ON Pulse is ready

Short

orange

light flash

Activation

(pulse)

blocked

The device does not deliver

a pulse due to the lack of

full skin contact.

Short red

light flash

Activation

(pulse)

blocked

The device does not deliver

a pulse due to non-allowed

skin tone.

9

Blinking

red light

Close to

end of life

Pulse light is nearing or

reached the end of its ser-

vice life.

“Steady”

red light

General

Error

Device has malfunctioned.

Who can use the device

The device is intended for women and men who desire to

remove unwanted hair.

This device can be used on all areas of normal skin on the

body including legs, underarms, bikini line, back, and arms.

This device should not be used on sensitive areas such as

genitals, lips, mouth or near the eyes.

This device can be used on skin tone types 1 to 4 as de-

picted in the Fitzpatrick skin chart below. Do not use on

dark skin such as types 5 and 6.

I II III IV V

X

VI

X

The device works best on dark hair, which contains more

melanin. Lighter hair will respond, but typically will require

more treatment sessions. White, gray or blond hair shows

a more limited response, but some users have noted hair

reduction after multiple treatment sessions.

Never use the device around or near your eyes.

Who cannot use the device

Contraindications

To prevent the possibility of serious personal injury, do not

use this device in the following instances, since the safety

of this device in these cases has not been fully established.

•

If you are under the age of 18.

•

If you are pregnant, nursing or might be pregnant.

•

If you have skin cancer, on areas at risk of malig-

nancy, or if you have received radiation therapy or

chemotherapy within the past three months.

•

If you have epilepsy.

•

On damaged or broken skin or if you have a history of

herpes or psoriasis outbreaks in the treatment area.

•

If you suffer from keloid scar formation (growth of

extrascar tissue where the skin has healed after an

injury).

10

•

If you have been taking tetracycline antibiotics and

medication with the following active ingredients with-

in the last two weeks: Retinoid acid, Retin-A, or drugs

containing Vitamin A such as Accutane.

•

If you are photosensitive or have other diseases re-

lated to light sensitivity.

•

If you suffer from severe or decompensated meta-

bolic conditions such as diabetes since it may delay

healing and infection in the case of an adverse effect.

•

If you have had a skin peel or other skin resurfacing

procedure within the last eight weeks.

CAUTION

•

If you have undergone any other aesthetic procedures

or any uncertainty regarding potential side effects,

consult your physician before use.

Possible side effects

If used according to these instructions, side effects from this

device are rare. Any aesthetic procedure can cause some

degree of side effects, however. It is important to under-

stand the risks and complications that could occur with a

pulsed light hair removal system.

Degree of Side Effects

Side Effects

Minor Skin Irritation

Skin Redness

Skin Sensitivity

Rare Skin Burns

Scarring

Pigment Changes

Excessive Redness and Swell-

ing

Extremely Rare Infection

Bruising

•

Skin Irritation

The use of Pulsed Light Hair Reduction System is gen-

erally very well-tolerated, but many users do feel a sen-

sation of warmth and a mild stinging sensation during

treatment or a few minutes after. Anything beyond min-

or skin irritation means that either the energy level is too

high or your skin is unable to tolerate the hair reduction

process.

11

•

Skin Redness

Redness on the treated area may appear after treatment

or within 24 hours. Consult your physician in case the

redness does not disappear after 2 to 3 days.

•

Skin Sensitivity

You may feel that skin in the treated area is more sensi-

tive or you may encounter dryness or flaking of the skin.

•

Skin Burns

Rarely, burns on the treated area can occur following the

use of the hair removal reduction system. The burns can

require a few weeks to heal and, extremely rarely, may

leave a visible scar.

•

Scarring

In rare cases, permanent scarring may occur. Usually

when scarring occurs it is in the form of a flat and white

lesion on the skin (hypotrophic). However, it can be large

and red (hypertrophic) or large and extend beyond the

margins of the injury itself (keloid). Subsequent aesthetic

treatments may be required to improve the appearance

of the scar.

•

Pigment Changes

Use of the device may cause temporary skin hyperpig-

mentation (increased pigment or brown discoloration) or

hypopigmentation (whitening) to the surrounding skin.

The risk is higher for people with darker skin tones. Usu-

ally discoloration or changes to skin pigment are tempor-

ary and permanent hyperpigmentation or hypopigmenta-

tion rarely occur.

•

Excessive Redness and Swelling

Very rarely, the treated area skin may become red and

swollen. This side effect is most common in sensitive

areas of the body. Redness and swelling should decrease

after 2 to 7 days and you should treat the area by apply-

ing ice. Avoid exposure to sun.

•

Infection

In rare cases, infection of the skin could occur after a

burn caused by the treatment.

•

Bruising

Blue-purple bruising is exceedingly rare and could last 5

to 10 days. As bruising fades, there could be a perma-

nent rusty brown discoloration of the skin (hyperpigmen-

tation).

Benefits

This device features a built-in skin color sensor that con-

tinually evaluates your skin tone and allows treatment only

on suitable areas. This safety feature also disables treat-

ment if the skin in the treatment area is too dark or tanned,

12

even if your general skin type is lighter. As an extra pre-

caution, this device only emits a light pulse when it is in

contact with your skin.

Response to the device hair reduction differs among indi-

viduals, depending on biological factors and how closely

treatment instructions are followed. Based on the treatment

regime in these instructions, some results can be seen in

3-4 weeks.

The hair will continue to grow up to two weeks after a treat-

ment session. Since hair grows in three different stages, the

hairs will naturally and gradually fall out depending on the

hair growth stage in which the treatment was done (only

hairs in the active growth stage will be affected). Some hair

may not be affected by the device because of the different

hair growth stages. Continue treatment over a period of time

to ensure hair is treated in the effective stage.

For permanent reduction in hair regrowth, defined as a long-

term, stable reduction in the number of hair regrowing when

measured at 6, 9, and 12 months you should follow treat-

ment regimen.

5. To Set Up

1

. Remove all components from the box (handheld device

and power supply).

2

. Before beginning the treatment, make sure the device is

clean, dry, and intact.

3

. Plug the power supply end into an electrical outlet and

the cord end into the device socket. The device is now

ready to be used.

Preparing Skin for Treatment

1

. Before treatment, make sure your skin is shaved, clean,

and dry (free of any residue such as powders, creams,

makeup, antiperspirants, or deodorants).

2

. Between treatments, you can shave but do not wax or

pluck treated hair.

3

. Never use flammable liquids such as alcohol (including

perfumes, sanitizers, or other applications containing al-

cohol) or acetone to clean the skin for at least one hour

before treatment.

4

. Ensure the device is clean and then perform a prelimin-

ary test on a small patch of skin in the intended treat-

ment area 48 hours prior to first full use. This test will

help determine the proper energy level setting for your

skin type (see the “Preliminary Test” section below). The

device is now ready to be used.

•

F

or a prolonged use, device cleaning is a must (see

chapter 6 “Care and maintenance”).

13

• R

emember: The device comes with a built-in skin-tone

sensor, enabling the application only on a suitable skin

range. This unique safety feature will not let you treat

areas where your skin is too dark or too tanned, even if

your general skin type is lighter.

•

T

he device is suitable for men. However male body hair,

especially those on the chest will require more hair re-

duction sessions.

Preliminary Test

A preliminary test will determine your skin’s reaction to the

device treatment and help you set the optimal energy level

for each treatment area. Perform a preliminary test on each

area you intend to treat 48 hours prior to the full treatment.

CAUTION

•

Do not treat full areas with energy levels that you have

not tested before! Do not treat the tested area for at

least 48 hours after the preliminary test is completed.

1

. Select an area of skin to test and place the treatment

window in full contact with the skin. Press the On/Off/

power selection button once to select Energy Level 1 and

then press the Trigger button once to emit a single pulse.

2

. If you feel comfortable with the energy level, press the

On/Off/power selection button again to increase to

Energy Level 2, move the treatment window of the de-

vice to another test area of skin and press the trigger

button again.

3

. If you still feel comfortable, increase the Energy Level

to 3.

4

. Stop the test if you do not feel comfortable, as increas-

ing the energy level increases the risk of adverse effects.

5

. If you see adverse effects such as severe redness or blis-

tering, stop the test immediately.

6

. Wait 48 hours and examine the tested area. If the skin in

the test area seems normal (no response or mild redness

observed), you can proceed with a full treatment in the

highest comfortable energy level. If you see excess red-

ness, swelling, or blistering even in the low-energy level

settings, do not treat that area.

Treating the Skin

I

MPORTANT:

Conduct a preliminary test before performing a full treat-

ment. See the “Preliminary Test” section above.

1

. Plug the power cord into the device; the green power

LED will flash indicating the device is in standby mode.

Press the On/Off/power selection button to turn on the

14

device; one green Level LED will illuminate indicating the

device is set to Energy Level 1. To increase the Energy

Level, press the On/Off/power selection button repeat-

edly to select Energy Level 2 or 3.

Select the energy level according to your convenience,

as determined in the preliminary test for that treatment

area.

2

. Position the treatment window onto the desired area of

skin, making sure it makes full contact. If the treatment

window is not properly positioned, the Power LED will

briefly change to orange. If your skin tone is too dark/

tanned, the Power LED will briefly change to red. In either

case, the device will not operate.

3

. Press the trigger button for a single pulse or press and

hold for continuous operation. After the first pulse, the

internal fan in the device may switch on.

4

. When pressing the trigger button you will see a bright

flash, hear a popping noise, and may feel a mild sting-

ing and/or heating sensation.

5

. Keep the trigger button pressed and move the device to

a different area after each pulse while keeping it in con-

tact with the skin. Continue until the entire treatment area

has been covered.

6

. After treatment, shut the device off by pressing and hold-

ing the On/Off/power selection button for three seconds;

the orange LED will illuminate while the device is in shut-

down mode, followed by blinking green which indicates

the device is in standby mode. Unplug the device after

each treatment session.

CAUTION

•

Do not overlap pulses in the same spot. Repeated

pulses on the same spot may cause burns.

•

Do not treat the same area of skin more than once per

treatment as it may cause skin irritation.

•

The device will not trigger a pulse if:

a. There is no full contact of the treatment window with

the body skin.

b. Your skin tone is too dark or tanned.

Recommended Treatment Schedule

Body Hair Color Light to

Medium Brown

Dark Brown

to Black

Fitzpatrick

Skin Tone

1-4 1-4

15

Recommended

Energy Level

1-3 1-3

Treatment Area

Legs

Arms

Underarms

Bikini Lines

Legs

Arms

Underarms

Bikini Lines

Average Number

of Treatments

10–12 8–10

Treatment

Interval

The first four treatments should

be once every two weeks, then

four treatments, once every four

weeks.

NOTES:

•

Hair reduction effectiveness differs among individ-

uals, depending on biological factors.

•

It may take up to 3-4 weeks before full results can be

seen. Hair will continue to grow up to two weeks af-

ter a hair reduction session. Since hair grows in three

different stages, the hairs will naturally and gradually

fall out depending on the hair growth stage in which

the treatment was performed (only hair in the active

growth phase will be affected). Some hair may not be

affected because of the different hair growth phases.

To remove the largest amount of hair, multiple treat-

ment sessions are required.

•

The number of sessions required is different for each

treatment area and for each user, as it is affected by

type of skin, hair, and hormone levels.

•

Maintenance may be needed from time to time if

growth is still visible.

What to expect when using the device

During treatment it is normal to experience:

• A

flash of light on each press of the trigger button. The

light will not harm the eyes when the device is applied

with full contact to the skin on the recomended treat-

ment areas.

• A

popping noise with each pulse.

•

A

sensation of heat radiating from the treated area af-

ter each pulse.

•

A

mild stinging sensation, similar to being snapped with

a rubber band.

•

S

ome mild red or pink coloration during and just after

treatment.

16

After Treatment

• A

pply a soothing lotion such as aloe vera.

•

D

o not use peeling and bleaching creams or products

for at least 24 hours.

• A

void direct sun exposure for at least two weeks. If re-

cently-treated skin is exposed to sunlight in this time

period, make sure to apply SPF 30 or higher sunscreen.

• D

o not wax or pluck hairs from treated areas.

Remember that hair may take up to two weeks to fall out if

the hair follicle is still active.

6. Care and Maintenance

• S

hut off and unplug the device before cleaning.

• C

lean the applicator head cover after every session by

using a dry, clean cloth.

• K

eep the device dry. Never place, store or use this de-

vice near bathtubs, showers, basins or other containers

of water as this may cause electric shock.

• I

f you do not plan on using the device for a long period

of time, clean it and store it away.

• I

f you plan to travel and take your device with you, you

should store it in the original box and follow the main-

tenance instructions.

7. Troubleshooting

• I

f the device does not turn on:

a. Ensure the power cord is connected properly into the

device and the electrical outlet.

b. Make sure that the electrical outlet has power.

• I

f the device does not trigger a pulse:

a. Ensure it makes full contact with the skin. The trigger

button will operate only when the device is in full con-

tact with the skin.

b. Check that the area being treated is large enough and

sufficiently flat. The whole treatment window must

touch the skin area. Pull the skin flat if needed.

c. If skin tone is too dark, the device will not operate and

the red indicator LED will flash.

d. In the case of a safety issue or when the lamp has

reached the end of its service life, a red LED will il-

luminate and then the device will shut down.

• G

eneral error:

a. Keep the treatment window clean. If you cannot get

the area clean, contact Customer Service.

b. If pulses are delayed after pressing the trigger button,

try to move to a cooler room. The device may pulse at

a slower rate in a warm environment.

17

c. In case of a general error, unplug the power cord from

the electrical outlet, wait 10 seconds and then recon-

nect it to reset the device.

• I

f you still have problems, contact Customer Service.

8. Specifications

Emitted light spectrum 475nm – 1.200nm max

Emitted energy flux: 5 Joules/0.16 sq in

(5 Joules/cm²)

Selectable energy levels: 3

Treatment window area: 0.47 sq in (3 cm²)

Pulse Rate: 1 pulse every 3 seconds

Power Supply Output: 12 VAC, 1.8 Amps

Power Supply Input: 100 – 240 VAC, 50 – 60Hz

Dimensions: 2.83 x 5.2 x 1.73 in

(72 x 132 x 44 mm)

Weight: 7.9 oz (224 g)

9. Storage

Storage and Transport Conditions

Temperature

Humidity

Pressure

14 ºF to 158 ºF (-10 ºC to 70 ºC

0 to 90% RH at 131 ºF (55 ºC )

non-condensing

Operational Conditions

Temperature

Humidity

Max operating altitude

50 ºF to 104 ºF (10 ºC to 40 ºC)

30% to 70% RH

10.000 feet

10. FCC Statement

Changes or modifications to the product not expressly ap-

proved by the party responsible for compliance could void

the user’s authority to operate the equipment.

NOTICE:

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide rea-

sonable protection against harmful interference in a resi

-

dential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harm-

ful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be deter-

mined by turning the equipment off and on, the user is en-

18

couraged to try to correct the interference by one or more

of the following measures:

• R

eorient or relocate the receiving antenna.

• I

ncrease the separation between the equipment and re-

ceiver.

• C

onnect the equipment into an outlet on a circuit differ-

ent from that to which the receiver is connected.

•

C

onsult the dealer or an experienced radio/TV techni-

cian for help.

11. Warranty

Limited Lifetime Warranty For Original

Purchaser

Your Beurer device for permanent hair reduction, Model

IPL7500, is warranted to be free from defects in materials

and workmanship for the life of the product under normal

conditions of intended use and service. This warranty ex-

tends only to the original retail purchaser and does not ex-

tend to retailers or subsequent owners.

We will, at our option, repair or replace the Beurer device

for permanent hair reduction, Model IPL7500, without addi-

tional charge, for any part or parts covered by these written

warranties. No refunds will be given. Repair or replacement

is our only responsibility and your only remedy under this

written warranty. If replacement parts for defective materials

are not available, Beurer reserves the right to make product

substitutions in lieu of repair or replacement.

For warranty service contact our customer service depart-

ment at 1-800-536-0366 or at info@beurer.com to provide

a description of the problem. If the problem is deemed to be

within the scope of the limited lifetime warranty, you will be

asked to mail the product at your costs in its original pack-

age with proof of purchase, your name, address and phone

number. If the problem is not deemed to be within the scope

of the limited lifetime warranty, we will provide a quotation

for repair respectively replacement and return shipping fee.

This warranty does not cover damage caused by misuse or

abuse; accident; the attachment of unauthorized accessory;

alteration to the product; improper installation; misapplica-

tion; lack of reasonable care with respect to the product;

unauthorized repairs or modifications; improper use of elec-

trical/power supply; old worn batteries; normal wear; loss

of power; dropped product; malfunction or damage of an

operating part as a result of failure to comply with instruc-

tions for use or to provide manufacturer’s recommended

maintenance; transit damage; theft; neglect; vandalism; or

environmental conditions; loss of use during the period the

product is at a repair facility or otherwise awaiting parts or

repair; or any other conditions whatsoever that are beyond

19

the control of Beurer. This warranty is void if the product is

ever used in a commercial or business environment. The

maximum liability of Beurer under this warranty is limited

to the purchase price actually paid by the customer for the

product covered by the warranty, as confirmed by proof of

purchase, regardless of the amount of any other direct or

indirect damage suffered by the customer.

This warranty is effective only if the product is purchased

and operated in the country in which the product is pur-

chased. A product that requires modifications or adaptation

to enable it to operate in any other country than the country

for which it was designed, manufactured, approved and/or

authorized, or repair of products damaged by these modi-

fications is not covered under this warranty.

THE WARRANTY PROVIDED HEREIN SHALL BE THE

SOLE AND EXCLUSIVE WARRANTY. ANY IMPLIED

WARRANTIES, OBLIGATIONS, OR LIABILITES, INCLUD-

ING BUT NOT LIMITED TO THE IMPLIED WARRANTY

OF MERCHANTABILITY AND FITNESS FOR A PARTIC-

ULAR PURPOSE, ARE LIMITED IN DURATION TO THE

DURATION OF THIS APPLICABLE WRITTEN WARRAN-

TY. Some states do not allow limitations on how long an

implied warranty lasts, so the above limitations may not

apply to you.

IN NO EVENT SHALL BEURER BE LIABLE FOR ANY

SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUEN-

TIAL DAMAGES FOR BREACH OF THIS OR ANY OTH-

ER WARRANTY, EXPRESS, IMPLIED OR ANY OTHER

THEORY OF LIABILITY, WHATSOEVER. Some states do

not allow the exclusion or limitation of special, incidental,

or consequential damages, so the above limitation may

not apply to you.

Beurer does not authorize anyone, including, but not lim-

ited to, retailers, the subsequent consumer purchaser of

the product from a retailer or remote purchaser, to obli-

gate Beurer in any way beyond the terms set forth herein.

This warranty does not extend to the purchase of opened,

used, repaired, repackaged and/or resealed products, in-

cluding but not limited to sale of such products on Inter

-

net auction sites and/or products by surplus or bulk resell-

ers. Any and all warranties or guarantees shall immediately

cease and terminate in connection with any products or

parts thereof which are repaired, replaced, altered, or modi-

fied, without the prior explicitly written consent of Beurer.

This warranty gives you specific legal rights, and you may

also have other rights which may vary from state to state.

For more information regarding our product line in the USA,

please visit: www.beurer.com

20

Distributed by:

Beurer North America LP

900 N Federal Hwy, Suite 300

Hallandale Beach, FL 33009. USA

www.beurer.com

Questions or comments? Call toll free 1-800-536-

0366 or contact info@beurer.com

Made in China.

Subject to errors and changes.

La page charge ...

Beurer IPL 7500 SatinSkin Pro Le manuel du propriétaire

Ce manuel convient également à

Beurer IPL 7500 SatinSkin Pro Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents