Tripp Lite 4K/60 HDMI over Cat6 Extenders and Splitters, Multi-Resolution Function Support Le manuel du propriétaire

Marque: Tripp Lite

Modèle: 4K/60 HDMI over Cat6 Extenders and Splitters, Multi-Resolution Function Support

Catégorie: Séparateurs vidéo

Taper: Le manuel du propriétaire

Ce manuel convient également à

B127P-002-H

Owner’s Manual

4K/60 HDMI over Cat6 Extenders

and Splitters, Multi-Resolution

Function Support

Local Unit Models: B127P-002-H, B127P-004-H

Remote Unit Models: B127P-100-H, B127P-100-H-SR

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

WARRANTY REGISTRATION

ISOBAR surge protector in our monthly drawing!

tripplite.com/warranty

Español 17 • Français 33 • Русский 49

Package Contents

Product Features

B127P-002-H

B127P-004-H

B127P-100-H

B127P-100-H-SR

Local (L) Unit or Remote (R) Unit L L R R

External Power Supplies (0 or 1) 1 1 0 0

Mounting Hardware Y Y Y N

All

• Support a maximum video resolution of 4K (3840 x 2160) @

60 Hz with 4:4:4 Chroma Subsampling

• Support up to 7.1-channel surround sound audio

• HDMI 2.0, HDCP 2.2 and HDR compatible

• Plug and play—no software or drivers required

Product Features

B127P-002-H

• 2-Port HDMI over Cat6 Extender/Splitter Local Transmitter Unit

• Splits an HDMI signal into two

• Works in tandem with Tripp Lite’s B127P-100-H and B127P-100-H-SR

receiver units to extend an HDMI signal

• Power over Cable (PoC) function to transfer power to remote receivers

• Supports 4K (3840 x 2160) @ 60 Hz and 1080 @ 60 Hz signals

• Multi-resolution function allows displays with varying resolutions to co-

exist in a single application without downgrading signal quality to the

lowest resolution

• Includes mounting hardware that allows unit to be wall-mounted, rack-

mounted or pole-mounted

B127P-004-H

• 4-Port HDMI over Cat6 Extender/Splitter Local Transmitter Unit

• Splits an HDMI signal into four

• Works in tandem with Tripp Lite’s B127P-100-H and B127P-100-H-SR

receiver units to extend an HDMI signal

• Power over Cable (PoC) function to transfer power to remote receivers

• Supports 4K (3840 x 2160) @ 60 Hz and 1080 @ 60 Hz signals

• Multi-resolution function allows displays with varying resolutions to co-

exist in a single application without downgrading signal quality to the

lowest resolution

• Includes an additional HDMI port, which can be used to connect a

local monitor or to daisy-chain additional B127P-004-H units (up to

three units can be daisy-chained together)

• Includes mounting hardware that allows unit to be wall-mounted, rack-

mounted or pole-mounted

Product Features

B127P-100-H

• HDMI over Cat6 Power over Cable (PoC) Remote Receiver Unit

• Works with B127P-002-H and B127P-004-H extender/splitters to

extend a 4K @ 60 Hz signal up to 125 ft. (38 m) from the source

• Built-in equalization control for video image auto-adjustment

• Supports 4K (3840 x 2160) @ 60 Hz and 1080 @ 60 Hz signals

• Multi-resolution function allows displays with varying resolutions to

co-exist in a single application without downgrading signal quality to

the lowest resolution

• Includes mounting hardware that allows unit to be wall-mounted, rack-

mounted or pole-mounted

B127P-100-H-SR

• HDMI over Cat6 Power over Cable (PoC) Short Distance Remote

Receiver Unit

• Works with B127P-002-H and B127P-004-H extender/splitters to

extend a 4K @ 60 Hz signal up to 50 ft. (15 m) from the source

• Built-in equalization control for video image auto-adjustment

• Supports 4K (3840 x 2160) @ 60 Hz and 1080 @ 60 Hz signals

• Multi-resolution function allows displays with varying resolutions to

co-exist in a single application without downgrading signal quality to

the lowest resolution

• Built-in 6 in. HDMI pigtail cable attaches directly to HDMI port at

display

Optional Accessories:

• N202-Series Cat6 24 AWG Solid Wire Patch Cables

• P569-XXX-CERT or P568-XXX-2A Series High-Speed HDMI 2.0 Cables

Disclaimer

Before installation, please check the following settings of your source(s)

and TV/monitor(s):

1. Set to display 60 Hz. Double-check factory settings, as default can

be set to a lower frequency (Hz) than advertised.

2. Ensure the input setting of your monitor is set at HDMI 2.0. Some

displays may have default setting at HDMI 1.4.

3. Verify your monitor has the HDR feature enabled. Some displays

may have this feature disabled as a factory setting.

4. Check if the Ultra HD (UHD) Deep Color setting is enabled on your TV/

monitor. Conﬁrm with your TV/monitor manufacturer which HDMI ports

support UHD Deep Color.

Note: If you wish to connect a local monitor to your installation, depending

on your TV/monitor make/model, the UHD Deep Color setting may need to be

disabled on your local TV/monitor to achieve 4K 60 Hz resolution.

Mounting Instructions (select models only)

The B127P-002-H, B127P-004-H and B127P-100-H include mounting

hardware that allows for a variety of mounting methods. The following

images illustrate how the included mounting brackets can be attached for

different installations.

Note: The model shown in the below images is for illustrative purposes only. Your

product may vary by model number, size or port orientation. The mounting options

for all over-IP units are the same.

Wall-mount

19” Rack-mount Pole-mount

Standard Extender/Splitter Installation

Notes:

1) Test to ensure the entire installation works properly before pulling cables through

ceilings/walls.

2) To achieve maximum distance and performance, use 24 AWG solid-wire Cat6

cable. Using stranded-wire Cat6 cable, or cable with a higher gauge size like

26 AWG, will result in a shorter extension distance since the cable will have a

more limited transmission capability. All Tripp Lite N202-Series Cat6 cables are

made with 24 AWG solid-wire cabling.

3) The installation diagram shows the B127P-004-H local transmitter unit. The

B127P-002-H installation is the same, except there are only two remote ports

and no local port monitor.

4) External power is not required for the B127P-100-H and B127P-100-H-SR units

due to Power over Cable (PoC) technology incorporated in the transmitter units.

B127P-004-H extender kit

B127P-100-H-SR

B127P-100-H

B127P-004-H

B127P-100-H-SR

HDR PLAYER

OPTIONAL

LOCAL MONITOR

Up to 125 ft. (38 m) Cat6 cable at 4K/60Hz

Up to 50 ft. (15 m) Cat6 cable at 4K/60Hz

Up to 15 ft. (5 m) HDMI 2.0 cable at 4K/60Hz

Up to 16 ft. (5 m) HDMI 1.4 cable at 1080p/60Hz

1 3

2 4

Standard Extender/Splitter Installation

1. Make sure all equipment in the installation—such as TVs, Blu-ray

players and the transmitter—is powered OFF.

2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or

P568-XXX-2A Series cables), connect the HDMI source to the INPUT

port on the B127P-002-H or B127P-004-H.

3. Optional for B127P-004-H: Using an HDMI 2.0 cable (such as

Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cables), connect an

HDMI monitor to the LOCAL port on the B127P-004-H unit.

4. Using Cat6 cable, connect the RJ45 port on the local transmitter unit

to the RJ45 port on the remote receiver unit.

5. Repeat Step 4 for each additional remote unit being connected.

6. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or

P568-XXX-2A Series cables), connect the remote receiver unit’s HDMI

port to a monitor.

7. Turn the power on to your connected TVs/monitors. The LOCAL

(orange) LED will illuminate to indicate the local port has been

connected to a display.

8. Connect the external power supply to the local transmitter unit, and

plug it into an available wall outlet or (optional) a Tripp Lite Surge

Protector, Power Distribution Unit (PDU) or Uninterruptible Power

Supply (UPS). The POWER (green) LED on the local transmitter unit

will illuminate to indicate the unit is receiving power from the external

power supply. The POWER (green) LED on the remote receiver unit

will illuminate to indicate the unit is receiving power from the local

transmitter unit through PoC technology.

9. Turn on the power to the HDMI source. The OUTPUT (orange) LED

on the local transmitter unit illuminates to indicate a signal is being

received from the source. Additionally, the OUTPUT (orange) LED will

illuminate for each port signal connection.

Standard Extender/Splitter Installation

10. The (orange) RJ45 LED will illuminate on both local transmitter and

remote receiver units to indicate a signal is being received from

source to display. The screen should now display on the connected

monitor(s).

Extender/Splitter Daisy-Chain

Installation

Notes:

1) Test to ensure the entire installation works properly before pulling cables through

ceilings/walls.

2) To achieve maximum distance and performance, use 24 AWG solid-wire Cat6

cable. Using stranded-wire Cat6 cable, or cable with a higher-gauge size like

26 AWG, will result in a shorter extension distance since the cable will have a

more limited transmission capability. All Tripp Lite N202-Series Cat6 cables are

made with 24 AWG solid-wire cabling.

3) Using the B127P-100-H, a 4K/60Hz signal can be extended up to 125 ft. (38 m)

from the source. Using a B127P-100-H-SR, a 4K/60Hz signal can be extended

up to 50 ft. (15 m) from the source.

Level 1

Level 2

Level 3

OPTIONAL

LOCAL

MONITOR

HDR PLAYER

B127P-004-H

Up to 125 ft. (38 m) Cat6 cable at 4K/60 Hz

Up to 50 ft. (15 m) Cat6 cable at 4K/60 Hz

Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz

Up to 6 ft. (1.8 m) HDMI 2.0 cable at 4K/60 Hz

Extender/Splitter Daisy-Chain

Installation

Extender/Splitter Daisy-Chain

Installation

1. Make sure all equipment in the installation—such as TVs, Blu-ray

players and the transmitter—is powered OFF.

2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or

P568-XXX-2A Series cables), connect the HDMI source to the INPUT

port on the B127P-004-H unit.

3. Using a 6 ft./1.83 m HDMI 2.0 cable (such as Tripp Lite

P569-006-CERT or P568-006-2A cables), connect the LOCAL port on

the B127P-004-H to the INPUT port on a second B127P-004-H unit.

4. Repeat step 3 if connecting a third B127P-004-H unit.

Note: Only three levels of splitters can be cascaded.

5. Optional: Using an HDMI 2.0 cable (such as Tripp Lite

P569-XXX-CERT or P568-XXX-2A Series cables), connect a local

monitor to the LOCAL HDMI port of the last B127P-004-H unit in the

installation.

6. Using Cat6 cable, connect one of the RJ45 output ports on the

local transmitter units to the RJ45 input port on a B127P-100-H or

B127P-100-H-SR remote receiver unit.

7. Repeat step 6 for each additional remote unit being connected.

8. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or

P568-XXX-2A Series cables), connect the B127P-100-H or

B127P-100-H-SR to a display.

9. Repeat step 8 for each additional monitor you are connecting to a

remote receiver unit.

10. Turn on the power to all your connected displays.

11. Connect the external power supply to the local transmitter unit and

plug it into an available wall outlet or (optional) a Tripp Lite Surge

Protector, Power Distribution Unit (PDU) or Uninterruptible Power

Supply (UPS). The POWER (green) LED will illuminate to indicate the

unit is receiving power from the external power supply.

12. Repeat step 11 for each additional B127P-004-H unit in the daisy

chain.

13. B127P-100-H and B127P-100-H-SR: The green and orange LEDs

will illuminate, with the green LED indicating the unit is receiving

power from the extender/splitter, and the orange LED indicating the

unit is connected to a powered ON local unit via Cat6 cable.

14. Turn on the power to the HDMI source. The orange RJ45 LEDs will

illuminate on the B127P-004-H to indicate the unit is receiving

a signal from the source. The screen should now display on the

connected monitors.

Extender/Splitter Daisy-Chain

Installation

1. Using a splitter, if one display’s color is abnormal, set the player’s

deep color setting to “turn off.”

2. When source is 4K/60 4:2:2 HDR, the output can’t display

1080p/60Hz quality.

If unable to receive an acceptable image after following the installation

instructions, try the following troubleshooting tips:

Resolution Comparison Tables

Port Connect TV Real Resolution

SOURCE

4K/60Hz

Situation 1

1 4K/60Hz 4K/60Hz

2-4 4K/60Hz 4K/60Hz

Situation 2

1 4K/60Hz 4K/60Hz

2-4 4K/30Hz 1080p/60Hz

Situation 3

1 4K/60Hz 4K/60Hz

2-4 1080p/60Hz 1080p/60Hz

Situation 4

1 4K/30Hz 4K/30Hz

2-4 4K/30Hz 4K/30Hz

Situation 5

1 4K/30Hz 4K/30Hz

2-4 1080p/60Hz 1080p/60Hz

Situation 6

1 1080p/60Hz 1080p/60Hz

2-4 1080p/60Hz 1080p/60Hz

Troubleshooting

Port Connect TV Real Resolution

SOURCE

4K/30Hz

Situation 1

1 4K/60Hz 4K/30Hz

2-4 4K/60Hz 4K/30Hz

Situation 2

1 4K/60Hz 4K/30Hz

2-4 4K/30Hz 4K/30Hz

Situation 3

1 4K/60Hz 4K/30Hz

2-4 1080p/60Hz 1080p/60Hz

Situation 4

1 4K/30Hz 4K/30Hz

2-4 4K/30Hz 4K/30Hz

Situation 5

1 4K/30Hz 4K/30Hz

2-4 1080p/60Hz 1080p/30Hz

Situation 6

1 1080p/60Hz 1080p/60Hz

2-4 1080p/60Hz 1080p/60Hz

Port Connect TV Real Resolution

SOURCE

1080P/60Hz

Situation 1

1 4K/60Hz 1080p/60Hz

2-4 4K/60Hz 1080p/60Hz

Situation 2

1 4K/60Hz 1080p/60Hz

2-4 4K/30Hz 1080p/60Hz

Situation 3

1 4K/60Hz 1080p/60Hz

2-4 1080p/60Hz 1080p/60Hz

Situation 4

1 4K/30Hz 1080p/60Hz

2-4 4K/30Hz 1080p/60Hz

Situation 5

1 4K/30Hz 1080p/60Hz

2-4 1080p/60Hz 1080p/30Hz

Situation 6

1 1080p/60Hz 1080p/60Hz

2-4 1080p/60Hz 1080p/60Hz

Warranty and Product Registration

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and

workmanship for a period of one (1) year from the date of initial purchase.

TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its

sole option) any such defective products. To obtain service under this warranty, you

must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or

an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE

or an authorized TRIPP LITE service center with transportation charges prepaid and

must be accompanied by a brief description of the problem encountered and proof

of date and place of purchase. This warranty does not apply to equipment which

has been damaged by accident, negligence or misapplication or has been altered or

modiﬁed in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied

warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the

purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR

DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING

OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGE. Speciﬁcally, TRIPP LITE is not liable for any costs, such as lost

proﬁts or revenue, loss of equipment, loss of use of equipment, loss of software,

loss of data, costs of substitutes, claims by third parties, or otherwise.

PRODUCT REGISTRATION

Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be

automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Warranty and Product Registration

WEEE Compliance Information for Tripp Lite Customers and Recyclers

(European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and

implementing regulations, when customers buy new electrical and electronic

equipment from Tripp Lite they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis

(this varies depending on the country)

• Send the new equipment back for recycling when this ultimately becomes

waste

WARNING

Use of this equipment in life support applications where failure of this equipment

can reasonably be expected to cause the failure of the life support equipment or to

signiﬁcantly affect its safety or effectiveness is not recommended.

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to

change without notice. Photos and illustrations may differ slightly from actual

products.

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

19-05-083 93-396F_RevA

Manual del Propietario

Extensores y Divisores HDMI

4K / 60 sobre Cat6, Soporte de

Función de Resolución Múltiple

Modelos de Unidad Local: B127P-002-H, B127P-004-H

Modelos de Unidad Remota: B127P-100-H, B127P-100-H-

1111 W. 35th Street, Chicago, IL 60609 EE. UU. • tripplite.com/support

English 1 • Françaís 33 • Русский 49

Contenido del Empaque

Características del Producto

B127P-002-H

B127P-004-H

B127P-100-H

B127P-100-H-SR

Unidad Local (L) o Unidad Remota (R) L L R R

Fuentes de Alimentación Externas (0 o 1) 1 1 0 0

Accesorios de instalación Y Y Y N

Todas

• Soportan una resolución de video de 4K (3840 x 2160) @ 60 Hz con

Submuestreo de Croma 4:4:4

• Soporta audio de sonido envolvente de hasta 7.1 canales

• Compatible con HDMI 2.0, HDCP 2.2 y HDR

• Conectar y Usar—No requiere software ni controladores

Características del Producto

B127P-002-H

•

Unidad Transmisora Local Extensor Divisor HDMI sobre Cat6 de 2 Puertos

• Divide una señal HDMI en dos

• Trabaja en tándem con las unidades receptoras B127P-100-H y

B127P-100-H-SR para extender una señal HDMI

• Función de Energía por Cable (PoC) para transferir energía a receptores

remotos

• Soporta señales de 4K (3840 x 2160) a 60 Hz y de 1080 a 60 Hz

• La función de resolución múltiple permite que pantallas con diferentes

resoluciones coexistan en una única aplicación sin degradar la calidad

de señal a la menor resolución

• Incluye los accesorios de instalación que permiten que la unidad sea

instalada en rack, en la pared o en poste.

B127P-004-H

•

Unidad Transmisora Local Extensor Divisor HDMI sobre Cat6 de 4 Puertos

• Divide una señal HDMI en cuatro

• Trabaja en tándem con las unidades receptoras B127P-100-H y

B127P-100-H-SR para extender una señal HDMI

• Función de Energía por Cable (PoC) para transferir energía a receptores

remotos

• Soporta señales de 4K (3840 x 2160) a 60 Hz y de 1080 a 60 Hz

• La función de resolución múltiple permite que pantallas con diferentes

resoluciones coexistan en una única aplicación sin degradar la calidad

de señal a la menor resolución

• Incluye un puerto HDMI adicional que puede utilizarse para conectar

un monitor local o unidades B127P-004-H adicionales en cadena

(pueden encadenarse hasta tres unidades juntas)

• Incluye los accesorios de instalación que permiten que la unidad sea

instalada en rack, en la pared o en poste.

Características del Producto

B127P-100-H

• Unidad Receptora Remota con Energía por Cable (PoC) HDMI sobre

Cat6

• Trabaja con los Extensores Divisores B127P-002-H y B127P-004-H

para extender una señal 4K / 60Hz hasta a 38 m [125 pies] de la

fuente

• Control de ecualización incorporado para ajuste automático de imagen

de video

• Soporta señales de 4K (3840 x 2160) a 60 Hz y de 1080 a 60 Hz

• La función de resolución múltiple permite que pantallas con diferentes

resoluciones coexistan en una única aplicación sin degradar la calidad

de señal a la menor resolución

• Incluye los accesorios de instalación que permiten que la unidad sea

instalada en rack, en la pared o en poste.

B127P-100-H-SR

• Unidad Receptora Remota de Corta Distancia con Energía por Cable

(PoC) HDMI sobre Cat6

• Trabaja con los Extensores y Divisores B127P-002-H y B127P-004-H

para extender una señal 4K / 60Hz hasta a 38 m [125 pies] de la

fuente

• Control de ecualización incorporado para ajuste automático de imagen

de video

• Soporta señales de 4K (3840 x 2160) a 60 Hz y de 1080 a 60 Hz

• La función de resolución múltiple permite que pantallas con diferentes

resoluciones coexistan en una única aplicación sin degradar la calidad

de señal a la menor resolución

• El cable ﬂexible de 15.2 cm [6"] HDMI se conecta directamente al

puerto HDMI en la pantalla

La page charge ...

Tripp Lite 4K/60 HDMI over Cat6 Extenders and Splitters, Multi-Resolution Function Support Le manuel du propriétaire

Marque: Tripp Lite

Modèle: 4K/60 HDMI over Cat6 Extenders and Splitters, Multi-Resolution Function Support

Catégorie: Séparateurs vidéo

Taper: Le manuel du propriétaire

Ce manuel convient également à

B127P-002-H

Télécharger le PDF

rapport

dans d''autres langues

español: Tripp Lite 4K/60 HDMI over Cat6 Extenders and Splitters, Multi-Resolution Function Support El manual del propietario

Tripp Lite 4K/60 HDMI over Cat6 Extenders and Splitters, Multi-Resolution Function Support Le manuel du propriétaire

Ce manuel convient également à

Tripp Lite 4K/60 HDMI over Cat6 Extenders and Splitters, Multi-Resolution Function Support Le manuel du propriétaire

dans d''autres langues

Documents connexes