Tripp Lite DisplayPort over Cat6 Extender and Receiver Kit, 4K/60 Hz Le manuel du propriétaire

Taper
Le manuel du propriétaire
Owner’s Manual
WARRANTY REGISTRATION
Register your product today and be automatically entered to
win an ISOBAR
®
surge protector in our monthly drawing!
tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2021 Tripp Lite. All rights reserved.
DisplayPort over Cat6 Extender
and Receiver Kit, 4K/60 Hz
DisplayPort over Cat6 Model: B127A-1A1-BDBD
DisplayPort to HDMI over Cat6 Model: B127A-1A1-BDBH
Español 13 • Français 24 • Русский 35 • Deutsch 46
20-09-170-Book.indb 120-09-170-Book.indb 1 4/6/2021 3:50:06 PM4/6/2021 3:50:06 PM
Package Contents
Product Features
B127A-1A1-BDBH
• DisplayPort 1.2a to HDMI over Cat6 Power over Cable (PoC)
Extender Kit
• Extends a 4K x 2K (3840 x 2160) @ 60 Hz signal, as specified in HDMI
2.0, up to 230 ft. (70 m) from the source.
• Built-in local HDMI port supports 4K @ 60 Hz signal
• Remote receiver unit features built-in equalization (EQ) control
and auto EDID image adjustment
• Supports up to 7.1-channel surround sound audio
• Receiver features built-in Toslink port for audio extraction function
• HDCP 2.2 compatible
• Plug-and-play - no software or drivers required
• Supports bi-directional IR and USB 1.1 function by DIP switch selection
• Includes mounting hardware that enables both the local transmitter and
remote receiver units to be wall-mounted, rack-mounted or pole-mounted
2
• Transmitter and Receiver Units
External Power Supply Plug Adapters: NEMA 1-15P North America;
AS/NZS 3112 Australia; BS 1363 U.K.; CEE 7/16 Schuko
• Mounting Hardware
Optional Accessories:
• N202-Series Cat6 24 AWG Solid-Wire Patch Cables
• P569-XXX-CERT or P568-XXX-2A Series High-Speed HDMI 2.0 Cables
• P580-Series DisplayPort Cables with Latches
20-09-170-Book.indb 220-09-170-Book.indb 2 4/6/2021 3:50:06 PM4/6/2021 3:50:06 PM
3
Product Features
B127A-1A1-BDBD
DisplayPort 1.2a over Cat6 extender and receiver kit with Power over Cable (PoC)
Extends a 4K x 2K (3840 x 2160) @ 60 Hz signal up to 230 ft. (70 m)
from the source
Built-in local HDMI port supports 4K x 2K (3840 x 216) @ 60 Hz resolutions
• Remote receiver unit features built-in equalization (EQ) control and audo
EDID image adjustment
• Supports up to 7.1-channel surround sound audio
• Receiver features a Toslink port for audio extraction
• Supports DisplayPort 1.2a and is HDCP 2.2 compatible
• Plug-and-play - no software or drivers required
• Supports bi-directional IR and USB 1.1 function by DIP switch selection
Includes mounting hardware that enables both the local transmitter and
remote receiver units to be wall-mounted, rack-mounted or pole-mounted
20-09-170-Book.indb 320-09-170-Book.indb 3 4/6/2021 3:50:06 PM4/6/2021 3:50:06 PM
4
Disclaimer
Before installation, check the following settings of your source(s)
and TV/monitor(s):
1. Set to display 60 Hz. Double-check factory settings, in case the default
is set to a lower frequency (Hz) than advertised.
2. Ensure the input setting of your monitor is set at HDMI 2.0. Some
displays may have default setting at HDMI 1.4
Note: This is only important for the B127A-1A1-BDBH model; the B127A-1A1-
BDBD
will need DP 1.2a settings.
3. Verify your monitor has the HDR feature enabled. Some displays
may have this feature disabled as a factory setting.
4. Check if the Ultra HD (UHD) Deep Color setting is enabled on your TV/
monitor. Confirm with your TV/monitor manufacturer which HDMI ports
support UHD Deep Color.
Note: Only for the B127A-1A1-BDBH model.
5. Check the USB/IR DIP switch, as the default setting is set to "IR".
Note: To connect a local monitor to your installation, the UHD Deep Color setting
may need to be disabled on your local TV/monitor (depending on the make/
model) to achieve 4K/60 Hz resolution.
20-09-170-Book.indb 420-09-170-Book.indb 4 4/6/2021 3:50:06 PM4/6/2021 3:50:06 PM
5
Mounting Instructions
The B127A-1A1-BDBH and B127A-1A1-BDBD include mounting hardware
that allows for a variety of mounting methods. The following images
illustrate how the included mounting brackets can be attached for different
installations.
19” Rack-mount Pole-mount
Wall-mount
Note: The model shown in the below images is for illustrative purposes only. Your
product may vary by model number, size or port orientation. The mounting options
for all over IP units are the same.
20-09-170-Book.indb 520-09-170-Book.indb 5 4/6/2021 3:50:07 PM4/6/2021 3:50:07 PM
6
Standard Extender Kit Installation
Model B127A-1A1-BDBH
Notes:
1. Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2. To achieve maximum distance and performance, use 24 AWG solid wire Cat6
cable. Using stranded-wire Cat6 cable or cable with a gauge (AWG) size higher
than 24 AWG will result in shorter extension distance. Higher gauge cabling,
such as 26 AWG, has a more limited transmission capability than lower gauge
cabling. All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid-wire
cabling.
3. The installation diagram shows a B127A-1A1-BDBH unit.
4. External power is not required for remote receiver units due to Power over Cable
(PoC) technology incorporated in the transmitter units.
1. Make sure all equipment in the installation—such as monitors, the
DisplayPort source and the transmitter—is powered OFF.
B127A-1A1-BDBH extender kit
LOCAL / TRANSMITTER REMOTE / RECEIVER
Micro-USB cable
Toslink cable
Up to 230 ft. Cat6 solid cable at 4K/60 Hz
Up to 15 ft. DisplayPort cable at 4K/60 Hz
Up to 15 ft. HDMI 2.0 cable at 4K/60 Hz
DisplayPort
Source
Monitor
TV
Up to 230 ft. (70 m) at 4K/60 Hz
IR Control
Pad
IR
SENSOR
IR Control
Pad
IR
SENSOR
USB
MOUSE
USB
KEYBOARD
20-09-170-Book.indb 620-09-170-Book.indb 6 4/6/2021 3:50:07 PM4/6/2021 3:50:07 PM
7
Standard Extender Kit Installation
2. Using a DisplayPort cable, connect the DisplayPort source to the
INPUT port on the local transmitter unit.
3. Optional for B127A-1A1-BDBH: Using an HDMI cable (such as
Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cables), connect
a local monitor to the LOCALOUT port on the B127A-1A1-BDBH local
transmitter unit.
4. Using Cat6 cable, connect the RJ45 port on the local transmitter unit
to the RJ45 port on the remote receiver unit.
5. Using an HDMI cable (such as Tripp Lite P569-XXX-CERT or
P568-XXX-2A Series cables), connect the remote receiver unit’s HDMI
port to a monitor.
6. Turn the power on to your connected TVs/monitors. The LOCAL (orange)
LED will illuminate to indicate the local port has been connected to
a display.
7. Connect the external power supply to the local transmitter unit and
plug it into an available wall outlet or (optional) Tripp Lite Surge
Protector, Power Distribution Unit (PDU) or Uninterruptible Power
Supply (UPS). The POWER (green) LED on the local transmitter unit
will illuminate to indicate the unit is receiving power from the external
power supply. The POWER (green) LED on the remote receiver unit
will illuminate to indicate the unit is receiving power from the local
transmitter unit through PoC technology.
Note: The external power adapter can be plugged into either the transmitter
or receiver unit.
8. Turn on the power to the DisplayPort source. The OUTPUT (orange)
LED on the local transmitter unit will illuminate to indicate a signal is
being received from the source.
9. The (orange) RJ45 LED will illuminate on both the local transmitter and
remote receiver units to indicate a signal is being received from the
source to display. The screen should now display on the connected
monitor.
20-09-170-Book.indb 720-09-170-Book.indb 7 4/6/2021 3:50:07 PM4/6/2021 3:50:07 PM
8
Standard Extender Kit Installation
Model B127A-1A1-BDBD
Notes:
1. Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2. To achieve maximum distance and performance, use 24 AWG solid wire Cat6
cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher
than 24 AWG, will result in shorter extension distance. Higher gauge cabling,
such as 26 AWG, has a more limited transmission capability than lower gauge
cabling. All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid-wire
cabling.
3. The installation diagram shows a B127A-1A1-BDBD unit.
4. External power is not required for remote receiver units due to Power over Cable
(PoC) technology incorporated in the transmitter units.
1. Make sure all equipment in the installation—such as monitors, the
DisplayPort source and the transmitter—is powered OFF.
B127A-1A1-BDBD extender kit
LOCAL / TRANSMITTER REMOTE / RECEIVER
Micro-USB cable
Toslink cable
Up to 230 ft. Cat6 solid cable at 4K/60 Hz
Up to 15 ft. DisplayPort cable at 4K/60 Hz
Up to 15 ft. HDMI 2.0 cable at 4K/60 Hz
DisplayPort
Source
Monitor
TV
Up to 230 ft. (70 m) at 4K/60 Hz
IR Control
Pad
IR
SENSOR
IR Control
Pad
IR
SENSOR
USB
MOUSE
USB
KEYBOARD
20-09-170-Book.indb 820-09-170-Book.indb 8 4/6/2021 3:50:07 PM4/6/2021 3:50:07 PM
9
Standard Extender Kit Installation
2. Using a DisplayPort cable, connect the DisplayPort source to the
INPUT port on the local transmitter unit.
3. Using an HDMI cable (such as Tripp Lite P569-XXX-CERT or
P568-XXX-2A Series cables), connect a local monitor to the LOCALOUT
port on the B127A-1A1-BDBD local transmitter unit.
4. Using Cat6 cable, connect the RJ45 port on the local transmitter unit
to the RJ45 port on the remote receiver unit.
5. Using a DisplayPort cable, connect the remote receiver unit’s
DisplayPort port to a monitor.
6. Turn the power on to your connected TVs/monitors. The LOCAL (orange)
LED will illuminate to indicate the local port has been connected to
a display.
7. Connect the external power supply to the local transmitter unit and
plug it into an available wall outlet or (optional) Tripp Lite Surge
Protector, Power Distribution Unit (PDU) or Uninterruptible Power
Supply (UPS). The POWER (green) LED on the local transmitter unit
will illuminate to indicate the unit is receiving power from the external
power supply. The POWER (green) LED on the remote receiver unit
will illuminate to indicate the unit is receiving power from the local
transmitter unit through PoC technology.
8. Turn on the power to the DisplayPort source. The OUTPUT (orange)
LED on the local transmitter unit will illuminate to indicate a signal is
being received from the source.
9. The (orange) RJ45 LED will illuminate on both the local transmitter and
remote receiver units to indicate a signal is being received from the
source to display. The screen should now display on the connected
monitor.
20-09-170-Book.indb 920-09-170-Book.indb 9 4/6/2021 3:50:07 PM4/6/2021 3:50:07 PM
10
USB/IR/Toslink Controls
The extender kit provides the following functional controls:
• USB 1.1 – One USB Micro-B input at transmitter, dual USB-A outputs
at receiver
• Bi-Directional IR – Dual 3.5 mm jacks at both the transmitter and receiver
• Toslink output at receiver and transceiver
(Optional) Connect the included IR-OUT cable to the transmitter unit’s
IR-OUT port. Place the sensor on the IR-OUT cable in an unobstructed
area within clear view of the device being controlled. Then connect the
included IR-IN cable to the receiver unit’s IR-IN port. The IR-IN cable will
communicate the desired command via the transmitter’s IR-OUT cable.
Note: The IR-OUT cable receives the signal from the remote control and
sends it to the device being controlled (e.g. Blu-ray™ player, etc.).
(Optional) With a user-supplied USB Micro-B cable (such as Tripp Lite
U050-XXX Series USB cable), connect to the transmitter’s Micro-B port.
Then connect a keyboard and mouse to the available USB-A ports on the
receiver unit.
(Optional) Connect a Toslink cable (such as Tripp Lite's A102-XXM Series
cables) to a set of speakers, an audio receiver or other audio system
equipped with Toslink digital outputs.
20-09-170-Book.indb 1020-09-170-Book.indb 10 4/6/2021 3:50:07 PM4/6/2021 3:50:07 PM
WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive
and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite
they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste
WARNING
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to
cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and
illustrations may differ slightly from actual products.
Warranty and Product Registration
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year
from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its
sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material
Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to
TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied
by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not
apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or
modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion
of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of
equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties,
or otherwise.
PRODUCT REGISTRATION
Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for
a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
11
20-09-170-Book.indb 1120-09-170-Book.indb 11 4/6/2021 3:50:07 PM4/6/2021 3:50:07 PM
12
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
20-09-170 93-3D2E_RevA
20-09-170-Book.indb 1220-09-170-Book.indb 12 4/6/2021 3:50:07 PM4/6/2021 3:50:07 PM
MÁS DE
AÑOS
Manual del Propietario
1111 W. 35th Street, Chicago, IL 60609 EE UU • tripplite.com/support
Copyright © 2021 Tripp Lite. Todos los derechos reservados.
Juego Extensor y Receptor
DisplayPort sobre Cat6, 4K @ 60 Hz
Modelo DisplayPort sobre Cat6: B127A-1A1-BDBD
Modelo DisplayPort a HDMI sobre Cat6: B127A-1A1-BDBH
English 1 • Français 24 • Русский 35 • Deutsch 46
20-09-170-Book.indb 1320-09-170-Book.indb 13 4/6/2021 3:50:08 PM4/6/2021 3:50:08 PM
Contenido del Empaque
Características del Producto
B127A-1A1-BDBH
• Alimentación por Cable [PoC] DisplayPort 1.2a a HDMI sobre Cat6 Juego
de Extensor
• Extiende una señal 4K x 2K (3840 x 2160) @ 60 Hz, como se especifica
en HDMI 2.0, hasta 70 m [230 pies] de la fuente.
• El puerto HDMI local incorporado soporta una señal 4K @ 60 Hz
• La unidad receptora remota cuenta con un control de ecualización [EQ]
incorporado y ajuste de imagen EDID automático
• Soporta audio de sonido envolvente de hasta 7.1 canales
• El receptor cuenta con un puerto Toslink incorporado para la función de
extracción de audio
• Compatible con HDCP 2.2
• Conectar y Usar - no requiere software ni controladores
• Soporta IR bidireccional y función USB 1.1 mediante selección de switch
para configuración [DIP]
• Incluye accesorios de instalación que permiten instalar en la pared,
instalar en rack o instalar en poste tanto las unidades transmisoras
locales como las receptoras remotas
14
• Unidades Transmisoras y Receptoras
Adaptadores de Clavija para Fuente de Alimentación Externa: NEMA
1-15P Norteamérica; AS/NZS 3112 Australia; BS 1363 Reino
Unido; CEE 7/16 Schuko
• Accesorios de Instalación
Accesorios Opcionales:
• Cables Patch Cat6 de Alambre Sólido 24 AWG de la Serie N202
• Cables HDMI 2.0 de Alta Velocidad Serie P569-XXX-CERT o P568-XXX-2A
• Cables de seguridad DisplayPort de la Serie P580
20-09-170-Book.indb 1420-09-170-Book.indb 14 4/6/2021 3:50:08 PM4/6/2021 3:50:08 PM
15
Características del Producto
B127A-1A1-BDBD
Juego extensor y receptor DisplayPort 1.2a sobre Cat6 con Alimentación por
Cable [PoC]
Extiende una señal de 4K x 2K (3840 x 2160) @ 60 Hz hasta a 70 m
[230 pies] de la fuente
El puerto HDMI local incorporado soporta resoluciones 4K x 2K (3840 x 2160)
@ 60 Hz
• La unidad receptora remota cuenta con control de ecualización
incorporado (EQ) y ajuste de la imagen de EDID de audio
• Soporta audio de sonido envolvente de hasta 7.1 canales
• El receptor cuenta con un puerto Toslink para extracción de audio
• Soporta DisplayPort 1.2a y es compatible con HDCP 2.2
• Conectar y Usar - no requiere software ni controladores
• Soporta IR bidireccional y función USB 1.1 mediante selección de switch
para configuración [DIP]
Incluye los accesorios de instalación que permite instalar las unidades
transmisora local y receptora remota en rack, en la pared o en poste.
20-09-170-Book.indb 1520-09-170-Book.indb 15 4/6/2021 3:50:08 PM4/6/2021 3:50:08 PM
16
Limitación de Responsabilidad
Antes de la instalación, revise los siguientes ajustes de su(s) fuente(s)
y Televisores o Monitor(es):
1. Configure para visualizar 60 Hz. Revise la configuración de fábrica,
en caso de que esté configurado el valor predeterminado para una
frecuencia (Hz) menor que la anunciada.
2. Asegurarse de que el valor de entrada de su monitor esté configurado
a HDMI 2.0. Algunas pantallas pueden tener una configuración
predeterminada a HDMI 1.4
Nota: Esto es solo importante para el modelo B127A-1A1-BDBH;
El B127A-1A1-BDBD
necesitará parámetros DP 1.2a.
3. Verifique que su monitor tenga habilitada la función HDR. Algunas
pantallas pueden tener esta función deshabilitada como configuración de
fábrica.
4. Verifique que la Configuración de Color Verdadero Ultra HD [UHD] está
habilitada en su televisor o monitor. Confirme con el fabricante de su
televisor o monitor qué puertos HDMI soportan Color Verdadero UHD.
Nota: Sólo para el modelo B127A-1A1-BDBH.
5. Revise el switch para configuración [DIP] USB / IR, ya que la configuración
predeterminada está configurada en "IR".
Nota: Para conectar un monitor local a su instalación, puede ser
necesario deshabilitar el ajuste de Color Verdadero UHD en su televisor o
monitor local (dependiendo de la marca y modelo)
para lograr la resolución 4K @ 60Hz.
20-09-170-Book.indb 1620-09-170-Book.indb 16 4/6/2021 3:50:08 PM4/6/2021 3:50:08 PM
17
Instrucciones de Instalación
El B127A-1A1-BDBH y el B127A-1A1-BDBD incluyen accesorios de
instalación que permiten una gran variedad de métodos de instalación.
Las siguientes imágenes ilustran cómo pueden fijarse los soportes de
instalación incluidos para las diferentes instalaciones.
Instalación en rack de 19” Instalación en poste
Instalación en la Pared
Nota: El modelo mostrado en las imágenes de abajo es solo para fines ilustrativos. Su
producto puede variar según el número de modelo, tamaño u orientación del puerto.
Las opciones de instalación para todas las unidades sobre IP son las mismas.
20-09-170-Book.indb 1720-09-170-Book.indb 17 4/6/2021 3:50:08 PM4/6/2021 3:50:08 PM
18
Instalación Estándar del Juego Extensor
Modelo B127A-1A1-BDBH
Notas:
1. Haga pruebas para asegurarse de que toda la instalación trabaje correctamente
antes de tender los cables a través de techos y paredes.
2. Para conseguir la distancia y rendimiento máximos, use un cable Cat6 con
conductores de alambre sólido 24 AWG cable. El uso de cable Cat6 de alambre
trenzado o cable con un número de tamaño de calibre (AWG) superior a 24 AWG
dará como resultado una distancia de extensión más corta. Un cableado de número
mayor de calibre, como 26 AWG, tiene capacidad de transmisión más limitada que el
cableado de menor calibre 24 AWG. Todos los cables Cat6 de la Serie N202 de Tripp
Lite están hechos con cableado de alambre sólido calibre 24 AWG.
3. El diagrama de instalación muestra una unidad B127A-1A1-BDBH.
4. No es necesaria alimentación externa para las unidades receptoras remotas debido a
la tecnología PoC incorporada en las unidades transmisoras.
1. Asegúrese de que todos los equipos en la instalación—como
monitores, la fuente DisplayPort y el transmisor—estén apagados.
B127A-1A1-BDBH juego de extensor
LOCAL / TRANSMISOR REMOTO / RECEPTOR
Cable Micro USB
Cable Toslink
Hasta 70 m [230 pies] Cable sólido Cat6 a 4K @ 60 Hz
Hasta 4.57 m [15 pies] Cable DisplayPort a 4K @ 60 Hz
Hasta 4.57 m [15 pies] Cable HDMI 2.0 a 4K @ 60 Hz
Fuente
DisplayPort
Monitor
TV
Hasta a 70 m [230 pies] a 4K @ 60 Hz
Pad de
Control IR
Sensor
IR
Pad de
Control IR
Sensor
IR
Mouse
USB
Teclado
USB
20-09-170-Book.indb 1820-09-170-Book.indb 18 4/6/2021 3:50:08 PM4/6/2021 3:50:08 PM
19
Instalación Estándar del Juego Extensor
2. Usando un cable DisplayPort, conecte la fuente DisplayPort al puerto INPUT
en la unidad transmisora local.
3. Opcional para el B127A-1A1-BDBH: Usando un cable HDMI (como
los cables Serie P569-XXX-CERT o P568-XXX-2A de Tripp Lite), conecte un
monitor local al puerto LOCALOUT en la unidad transmisora B127A-1A1-
BDBH local.
4. Usando cable Cat6, conecte el puerto RJ45 en la unidad transmisora local al
puerto RJ45 en la unidad receptora remota.
5. Usando un cable HDMI (como los cables de la Serie P569-XXX-CERT o P568-
XXX-2A de Tripp Lite), conecte el puerto HDMI de la unidad receptora remota
a un monitor.
6. Encienda sus televisores y monitores conectados. El LED LOCAL (naranja) se
iluminará para indicar que puerto local ha sido conectado a una pantalla.
7. Conecte la fuente de alimentación externa incluida a la unidad transmisora
local y enchúfela en un tomacorriente de pared o (opcional) Supresor
de Sobretensiones, Unidad de Distribución de Energía [PDU] Sistema de
Respaldo Ininterrumpible [UPS] de Tripp Lite. El LED POWER (Verde) en
la unidad transmisora local se iluminará para indicar que la unidad está
recibiendo energía de la fuente de alimentación externa. El LED POWER (Verde)
en la unidad receptora remota se iluminará para indicar que la unidad está
recibiendo energía de la unidad transmisora local mediante tecnología PoC.
Nota: El adaptador de alimentación externa puede enchufarse en la unidad
transmisora o receptora.
8. Encienda la fuente de DisplayPort. El LED OUTPUT (naranja) en la unidad
transmisora local se iluminará para indicar que se recibe una señal de la
fuente.
9. El LED RJ45 (naranja) se iluminará en el transmisor local y en las unidades
receptoras remotas para indicar que se está recibiendo una señal desde
la fuente a la pantalla. Ahora se debe mostrar la pantalla en el monitor
conectado monitor.
20-09-170-Book.indb 1920-09-170-Book.indb 19 4/6/2021 3:50:08 PM4/6/2021 3:50:08 PM
20
Instalación Estándar del Juego Extensor
Modelo B127A-1A1-BDBD
Notas:
1. Haga pruebas para asegurarse de que toda la instalación trabaje correctamente
antes de tender los cables a través de techos y paredes.
2. Para conseguir la distancia y rendimiento máximos, use un cable Cat6 con
conductores de alambre sólido 24 AWG cable. El uso de cable Cat6 de alambre
trenzado o cable con un número de tamaño de calibre (AWG) superior a 24 AWG
dará como resultado una distancia de extensión más corta. Un cableado de número
mayor de calibre, como 26 AWG, tiene capacidad de transmisión más limitada que el
cableado de menor calibre 24 AWG. Todos los cables Cat6 de la Serie N202 de Tripp
Lite están hechos con cableado de alambre sólido calibre 24 AWG.
3. El diagrama de instalación muestra una unidad B127A-1A1-BDBD.
4. No es necesaria alimentación externa para las unidades receptoras remotas debido a
la tecnología PoC incorporada en las unidades transmisoras.
1. Asegúrese de que todos los equipos en la instalación—como
monitores, la fuente DisplayPort y el transmisor—estén apagados.
B127A-1A1-BDBD juego de extensor
Monitor
TV
LOCAL / TRANSMISOR REMOTO / RECEPTOR
Cable Micro USB
Cable Toslink
Hasta 70 m [230 pies] Cable sólido Cat6 a 4K @ 60 Hz
Hasta 4.57 m [15 pies] Cable DisplayPort a 4K @ 60 Hz
Hasta 4.57 m [15 pies] Cable HDMI 2.0 a 4K @ 60 Hz
Fuente
DisplayPort
Hasta a 70 m [230 pies] a 4K @ 60 Hz
Pad de
Control IR
Sensor
IR
Pad de
Control IR
Sensor
IR
Mouse
USB
Teclado
USB
20-09-170-Book.indb 2020-09-170-Book.indb 20 4/6/2021 3:50:08 PM4/6/2021 3:50:08 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Tripp Lite DisplayPort over Cat6 Extender and Receiver Kit, 4K/60 Hz Le manuel du propriétaire

Taper
Le manuel du propriétaire