Tripp Lite 4K/60 DisplayPort over Cat6 Extenders and Splitters Le manuel du propriétaire

Taper
Le manuel du propriétaire
1
Owner’s Manual
4K/60 DisplayPort over Cat6
Extenders and Splitters
Extender Kits Model: B127-1A1-DH
Splitters kit Models: B127-002-D2H, B127-004-D4H
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
Español 13 • Français 25 • Русский 37
19-01-458-93393A.indb 1 3/8/2019 2:42:22 PM
2
Package Contents
Product Features
B127-1A1-DH
B127-002-D2H
B127-004-D4H
Local Unit (L), Remote Unit (R) or Both (B) B B B
External Power Supplies 1 1 1
Mounting Hardware Y Y Y
All
Support 4K video resolution (3840 x 2160 @ 60 Hz) and 4:4:4
chroma subsampling
Support up to 7.1-channel surround sound audio
DisplayPort 1.2a compatible
Supports up to 8-channel LPCM, AC-3, DTS digital audio
Plug and play—no software or drivers required
B127-1A1-DH
DisplayPort over Cat6 Power-over-Cable (PoC) Extender Kit
Extends a 4K (3840 x 2160 @ 60 Hz) signal up to 125 ft. (38 m)
from the source
Additional HDMI port on the local transmitter unit allows connection of
a local monitor
19-01-458-93393A.indb 2 3/8/2019 2:42:22 PM
3
Product Features
Remote receiver unit features built-in equalization (EQ) control and
auto EDID image adjustment
Includes mounting hardware that allows both the local transmitter and
remote receiver units to be wall-mounted, rack-mounted or pole-
mounted
B127-002-D2H
DisplayPort over Cat6 Power Over Cable (PoC) 2 Port Splitter/Extender
Kit
Extends a 4K (3840 x 2160 @ 60 Hz) signal up to 125 ft. (38 m)
from the source
Remote HDMI receiver units feature built-in equalization (EQ) control
and auto EDID image adjustment
Kit includes a 2-Port Splitter Extender and two Remote Receivers
Includes mounting hardware that allows unit to be wall-mounted, rack-
mounted or pole-mounted
B127-004-D4H
DisplayPort over Cat6 Power-over-Cable (PoC) 4 Port Splitter/Extender
Kit
Extends a 4K (3840 x 2160 @ 60 Hz) signal up to 125 ft. (38 m)
from the source
Remote HDMI receiver units feature built-in equalization (EQ) control
and auto EDID image adjustment
Kit includes a 4-Port Splitter Extender and four Remote Receivers
Includes mounting hardware that allows unit to be wall-mounted, rack-
mounted or pole-mounted
Additional HDMI port on the local transmitter unit allows connection of
a local monitor
19-01-458-93393A.indb 3 3/8/2019 2:42:22 PM
4
Product Features
Disclaimer
Optional Accessories:
N202-Series Cat6 24 AWG Solid-Wire Patch Cables
P569-XXX-CERT or P568-XXX-2A Series High-Speed HDMI 2.0 Cables
P580-XXX DisplayPort Cables
Before installation, please check the following settings of your source(s)
and TV/monitor(s):
1. Set monitor to display at 60 Hz. Double check factory settings, as
default can be set to a lower frequency (Hz).
2. Ensure your monitor’s input setting is set to HDMI 2.0. Some displays
may have a default setting of HDMI 1.4
3. Verify your monitor has the HDR feature enabled. Some displays may
have this feature disabled as a default setting.
4. Check if the Ultra HD (UHD) Deep Color setting is enabled on your TV/
monitor. Confirm with your TV/monitor manufacturer which HDMI ports
support UHD Deep Color.
Note: If wishing to connect a local monitor to your installation, depending on
your TV/monitor make/model, the UHD Deep Color setting may need to be
disabled on your local TV/monitor to achieve 4K 60 Hz resolution.
19-01-458-93393A.indb 4 3/8/2019 2:42:22 PM
5
Mounting Instructions (select models)
The B127-1A1-DH, B127-002-D2H and B127-004-D4H include
mounting hardware, allowing for a variety of mounting methods. The
following images illustrate how the included mounting brackets can be
attached for different installations.
Note: The model shown in the below images is for illustrative purposes only. Your
product may vary by model number, size or port orientation. The mounting options
for all over IP units are the same.
Wall-mount
19” Rack-mount Pole-mount
19-01-458-93393A.indb 5 3/8/2019 2:42:22 PM
6
Standard Extender Kit Installation
Notes:
Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
To achieve maximum distance and performance, use 24 AWG solid-wire Cat6
cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher
than 24 AWG. will result in shorter extension distance. Higher gauge cabling,
such as 26 AWG, has a more limited transmission capability than lower gauge
cabling. All Tripp Lite N202-Series Cat6 cables use 24 AWG solid-wire cabling.
The installation diagram shows a B127-1A1-DH unit.
External power is not required for the remote receiver due to Power-over-Cable
(PoC) technology incorporated in the transmitter unit.
B127-1A1-DH
Extender Kit
MONITOR PC
LOCAL
TRANSMITTER
REMOTE
RECEIVER
Up to 125 ft. (38 m) at 4K/60 Hz
Up to 125 ft. (38 m) Cat6 cable at 4K/60 Hz
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz
Up to 15 ft. (4.5 m) DisplayPort cable at 4K/60 Hz
1
2
3
19-01-458-93393A.indb 6 3/8/2019 2:42:22 PM
7
Standard Extender Kit Installation
1. Make sure all equipment in the installation—such as TVs, Blu-ray
players and the transmitter—is powered OFF.
2. Using DisplayPort cables (such as Tripp Lite P580-XXX Series),
connect the DisplayPort source to the INPUT port on the
B127-1A1-DH local transmitter unit.
3. Optional for B127-1A1-DH: Using an HDMI 2.0 cable (such as
Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cable), connect
a local monitor to the LOCAL port on the B127-1A1-DH local
transmitter unit.
4. Using Cat6 cable, connect the RJ45 port on the local transmitter unit
to the RJ45 port on the remote receiver unit.
5. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or
P568-XXX-2A Series cable), connect the remote receiver unit’s HDMI
port to a monitor.
6. Power on all connected displays. The LOCAL (orange) LED will
illuminate to indicate the local port is connected to a display.
7.
Connect the external power supply to the local transmitter unit and plug
it into an available wall outlet or (optional) a Tripp Lite Surge Protector,
Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS).
The POWER (green) LED will illuminate to indicate the unit is receiving
power from the external power supply. The POWER (green) LED on the
remote receiver unit will illuminate to indicate the unit is receiving power
from the local transmitter unit by way of PoC technology.
8. Turn on the power to the DisplayPort source. The OUTPUT (orange)
LED on the local transmitter unit will illuminate to indicate a signal is
received from the source.
9. The RJ45 (orange) LED will illuminate on both local transmitter and
remote receiver units to indicate a signal is being received from
source to display. The screen should now display on the connected
monitor.
19-01-458-93393A.indb 7 3/8/2019 2:42:22 PM
8
Standard Extender Installation
Notes:
Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
To achieve maximum distance and performance, use 24 AWG solid-wire Cat6
cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher
than 24 AWG. will result in shorter extension distance. Higher gauge cabling,
such as 26 AWG, has a more limited transmission capability than lower gauge
cabling. All Tripp Lite N202-Series Cat6 cables use 24 AWG solid-wire cabling.
The installation diagram shows the B127-004-D4H local transmitter unit. The
B127-002-D2H installation is the same, except there are only two remote ports
and no local monitor port.
External power is not required for the B127-100-H or B127-100-H-SR.
B127-004-D4H
extender kit
OPTIONAL
LOCAL MONITOR
PC
B127-004-D4H
B127-100-H
B127-100-H-SR
B127-100-H
B127-100-H-SR
Up to 125 ft. (38 m) Cat6 cable at 4K/60 Hz
Up to 50 ft. (15 m) Cat6 cable at 4K/60 Hz
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz
Up to 15 ft. (4.5 m) DisplayPort cable at 4K/60 Hz
2
1
3
4
19-01-458-93393A.indb 8 3/8/2019 2:42:22 PM
9
Standard Extender Installation
1. Make sure all equipment in the installation—such as TVs, Blu-ray
players and the transmitter—is powered OFF.
2. Using DisplayPort cables (such as Tripp Lite P580-XXX Series),
connect the DisplayPort source to the INPUT port on the
B127-002-D2H or B127-004-D4H local transmitter unit.
3. Optional for B127-004-D4H: Using an HDMI 2.0 cable (such as
Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cable), connect
a local monitor to the LOCAL port on the B127-004-D4H local
transmitter unit.
4. Using Cat6 cable, connect the RJ45 output port on the local
transmitter unit to the RJ45 port on the B127-100-H remote receiver
unit.
5. Repeat step 4 for each additional remote receiver unit being
connected.
6. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or
P568-XXX-2A Series cable), connect the B127-100-H’s HDMI port to
a monitor.
7. Repeat Step 6 for each additional remote B127-100-H receiver unit
in the installation.
8. Power on all connected displays. The LOCAL (orange) LED will
illuminate to indicate the local port is connected to a display.
9. Connect the external power supply to the B127-002-D2H or
B127-004-D4H local transmitter unit and plug it into an available
wall outlet or (optional) a Tripp Lite Surge Protector, Power Distribution
Unit (PDU) or Uninterruptible Power Supply (UPS). The POWER
(green) LED will illuminate to indicate the unit is receiving power from
the external power supply. On the B127-100-H, the POWER (green)
LED on the remote receiver unit will illuminate to indicate the unit is
receiving power from the extender/splitter.
19-01-458-93393A.indb 9 3/8/2019 2:42:22 PM
10
10. Turn on the power to the DisplayPort source. The (orange) LEDs on
the B127-002-D2H and B127-004-D4H will illuminate to indicate a
signal is received from the source. Additionally, the OUTPUT (orange)
LED will illuminate for each port signal connection.
11. The RJ45 (orange) LEDs on the B127-100-H will illuminate to
indicate a signal is being received from the extender/splitter. The
screen should now display on the connected monitor.
Standard Extender Installation
19-01-458-93393A.indb 10 3/8/2019 2:42:22 PM
11
Warranty and Product Registration
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and
workmanship for a period of one (1) year from the date of initial purchase.
TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its
sole option) any such defective products. To obtain service under this warranty, you
must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or
an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE
or an authorized TRIPP LITE service center with transportation charges prepaid and
must be accompanied by a brief description of the problem encountered and proof
of date and place of purchase. This warranty does not apply to equipment, which
has been damaged by accident, negligence or misapplication or has been altered or
modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
Some states do not permit limitation or exclusion of implied warranties; therefore,
the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost
profits or revenue, loss of equipment, loss of use of equipment, loss of software,
loss of data, costs of substitutes, claims by third parties, or otherwise.
PRODUCT REGISTRATION
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll
be automatically entered into a drawing for a chance to win a FREE Tripp Lite
product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
19-01-458-93393A.indb 11 3/8/2019 2:42:22 PM
12
Warranty and Product Registration
WEEE Compliance Information for Tripp Lite Customers and Recyclers
(European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and
implementing regulations, when customers buy new electrical and electronic
equipment from Tripp Lite they are entitled to:
Send old equipment for recycling on a one-for-one, like-for-like basis
(this varies depending on the country)
Send the new equipment back for recycling when this ultimately becomes
waste
Use of this equipment in life support applications where failure of this equipment
can reasonably be expected to cause the failure of the life support equipment or to
significantly affect its safety or effectiveness is not recommended.
Tripp Lite has a policy of continuous improvement. Specifications are subject to
change without notice. Photos and illustrations may differ slightly from actual
products.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
19-01-458 93-393A_RevA
19-01-458-93393A.indb 12 3/8/2019 2:42:23 PM
13
Manual del Propietario
Extensores y Divisores
DisplayPort 4K /
60 sobre Cat6
Juegos Extensores Modelo: B127-1A1-DH
Modelos de Juego de Divisores: B127-002-D2H,
B127-004-D4H
1111 W. 35th Street, Chicago, IL 60609 EE UU • www.tripplite.com/support
Copyright © 2019 Tripp Lite. Todos los derechos reservados.
English 1 • Français 25 • Русский 37
19-01-458-93393A.indb 13 3/8/2019 2:42:23 PM
14
Contenido del Empaque
Características del Producto
B127-1A1-DH
B127-002-D2H
B127-004-D4H
Unidad Local (L), Unidad Remota (R) o Ambas (B) B B B
Fuentes de Alimentación Externa 1 1 1
Accesorios de instalación Y Y Y
Todas
Soportan una resolución de video 4K (3840 x 2160 @60 Hz) y
submuestreo de croma 4:4:4
Soporta audio de sonido envolvente de hasta 7.1 canales
Compatible con DisplayPort 1.2a
Soporta hasta LPCM de 8 canales, audio digital DTS
Conectar y Usar—No requiere software ni controladores
B127-1A1-DH
Juego Extensor PoC DisplayPort sobre Cat6
Extiende una señal de 4K (3840 x 2160 @60 Hz) hasta a 38 m
[125 pies] desde la fuente
Un puerto HDMI adicional en la unidad transmisora local permite la
conexión de un monitor local
19-01-458-93393A.indb 14 3/8/2019 2:42:23 PM
15
Características del Producto
La unidad receptora remota cuenta con un control de ecualización (EQ)
incorporado y ajuste de imagen EDID automático
Incluye los accesorios de instalación que permiten que las unidades
transmisora local y receptora remota sean instaladas en rack, en la
pared o en poste.
B127-002-D2H
Juego de Extensor Divisor de 2 Puertos PoC DisplayPort sobre Cat6
Extiende una señal de 4K (3840 x 2160 @60 Hz) hasta a 38 m
[125 pies] desde la fuente
Las unidades receptoras remotas HDMI cuentan con un control de
ecualización (EQ) incorporado y ajuste de imagen EDID automático
El Juego Incluye un Extensor Divisor de 2 Puertos y dos Receptores
Remotos
Incluye los accesorios de instalación que permiten que la unidad sea
instalada en rack, en la pared o en poste.
B127-004-D4H
Juego de Extensor Divisor de 4 Puertos PoC DisplayPort sobre Cat6
Extiende una señal de 4K (3840 x 2160 @60 Hz) hasta a 38 m
[125 pies] desde la fuente
Las unidades receptoras remotas HDMI cuentan con un control de
ecualización (EQ) incorporado y ajuste de imagen EDID automático
El Juego Incluye un Extensor Divisor de 4 Puertos y cuatro Receptores
Remotos
Incluye los accesorios de instalación que permiten que la unidad sea
instalada en rack, en la pared o en poste.
Un puerto HDMI adicional en la unidad transmisora local permite la
conexión de un monitor local
19-01-458-93393A.indb 15 3/8/2019 2:42:23 PM
16
Características del Producto
Limitación de Responsabilidad
Accesorios Opcionales:
Cables Patch Cat6 de Alambre Sólido 24 AWG de la Serie N202
Cables HDMI 2.0 de Alta Velocidad Serie P569-XXX-CERT o P568-XXX-2A
Cables DisplayPort P580-XXX
Antes de la instalación, compruebe los siguientes ajustes de su(s)
fuente(s) y TV o Monitor(es):
1. Configure el monitor @60 Hz. Compruebe la configuración de fábrica,
puede estar predeterminado para una frecuencia (Hz) menor.
2. Asegúrese de que la configuración de entrada de su monitor esté
establecida en HDMI 2.0. Algunas pantallas pueden tener una
configuración predeterminada de HDMI 1.4
3. Verifique que su monitor tenga habilitada la característica HDR.
Algunas pantallas pueden tener esta función deshabilitada como
configuración predeterminada.
4. Verifique que la Configuración de Color Verdadero Ultra HD [UHD] está
habilitada en su TV o Monitor. Confirme con el fabricante de su TV o
Monitor qué puertos HDMI soportan Color Verdadero UHD.
Nota: Si desea conectar un monitor local a su instalación, dependiendo de la
manufactura o modelo de su TV o monitor, puede ser necesario deshabilitar el
ajuste de color verdadero UHD en su TV o monitor local para lograr la resolución
4K 60 Hz.
19-01-458-93393A.indb 16 3/8/2019 2:42:23 PM
17
Instrucciones de Instalación (modelos selectos)
El B127-1A1-DH, B127-002-D2H y B127-004-D4H incluyen accesorios
de instalación, lo que permite una variedad de métodos de instalación.
Las siguientes imágenes ilustran cómo pueden fijarse los soportes de
instalación incluidos para las diferentes instalaciones.
Nota: El modelo mostrado en las imágenes de abajo es solo para fines ilustrativos. El
producto puede variar según el número de modelo, tamaño u orientación de puerto.
Las opciones de instalación para todas las unidades sobre IP son las mismas.
Instalación en la Pared
Instalación en rack de 19” Instalación en poste
19-01-458-93393A.indb 17 3/8/2019 2:42:23 PM
18
Instalación de Juego Extensor Estándar
Notas:
Haga pruebas para asegurarse de que toda la instalación trabaje correctamente
antes de jalar los cables a través de techos y paredes.
Para conseguir la distancia y rendimiento máximos, use un cable Cat6 con
conductores de alambre sólido 24 AWG. Usar cable Cat6 de alambre trenzado
o cable con un número de calibre (AWG) mayor de 24 AWG resultará en una
distancia de extensión más corta. Un cableado de mayor calibre, como 26 AWG,
tiene capacidad de transmisión más limitada que el cableado de menor calibre.
Todos los cables Cat6 de la Serie N202 de Tripp Lite usan cableado de alambre
sólido 24 AWG.
El diagrama de instalación muestra una unidad b127-1A1-DH.
No se requiere energía externa en el receptor remoto debido a la tecnología PoC
incorporada en la unidad transmisora.
Juego Extensor
B127-1A1-DH
MONITOR PC
TRANSMISOR
LOCAL
RECEPTOR
REMOTO
Hasta a 38 m [125 pies] a 4K/60 Hz
Cable Cat6 de hasta 38 m [125 pies] a 4K/60 Hz
Cable HDMI 2.0 de hasta 4.6 m [15 pies] a 4K/60 Hz
Cable DisplayPort de hasta 4.6 m [15 pies] a 4K/60 Hz
1
2
3
1. Asegúrese de que todos los equipos en la instalación—como TVs,
reproductores Blu-ray y el transmisor—estén apagados.
19-01-458-93393A.indb 18 3/8/2019 2:42:23 PM
19
Instalación de Juego Extensor Estándar
2. Usando cables DisplayPort (como el Tripp Lite Serie P580-XXX),
conecte la fuente de DisplayPort al puerto INPUT en la unidad
transmisora local B127-1A1-DH.
3. Opcional para B127-1A1-DH: Utilizando un cable HDMI 2.0 (como
el cable Serie P569-XXX-CERT o P568-XXX-2A de Tripp Lite), conecte
un monitor local al puerto LOCAL en la unidad transmisora local
B127-1A1-DH.
4. Usando cable Cat6, conecte el puerto RJ45 en la unidad transmisora
local al puerto RJ45 en la unidad receptora remota.
5. Utilizando un cable HDMI 2.0 (como el cable Serie P569-XXX-CERT o
P568-XXX-2A de Tripp Lite), conecte la unidad receptora remota del
puerto HDMI a un monitor.
6. Encienda todas las pantallas conectadas. El LED LOCAL (naranja)
se iluminará para indicar que el puerto local está conectado a una
pantalla.
7. Conecte la fuente de alimentación externa a la unidad transmisora
local y enchúfela en un tomacorrientes de pared (opcional),
Supresor de Sobretensiones, Unidad de Distribución de Energía
[PDU] o Sistema de Respaldo Ininterrumpible [UPS] de Tripp Lite.
El LED POWER (Verde) se iluminará para indicar que la unidad
está recibiendo energía de la fuente de alimentación externa. El
LED POWER (Verde) en la unidad receptora remota se iluminará
para indicar que la unidad está recibiendo energía de la unidad
transmisora local mediante la tecnología PoC.
8. Encienda la fuente de DisplayPort. El LED OUTPUT (naranja) en la
unidad transmisora local se iluminará para indicar que se recibe una
señal de la fuente.
9. El LED RJ45 (naranja) encenderá en las unidades transmisora local y
receptora remota para indicar que se está recibiendo una señal de la
fuente a la pantalla. Ahora se debe mostrar la pantalla en el monitor
conectado.
19-01-458-93393A.indb 19 3/8/2019 2:42:23 PM
20
Instalación de Extensor Estándar
Notas:
Haga pruebas para asegurarse de que toda la instalación trabaje correctamente
antes de jalar los cables a través de techos y paredes.
Para conseguir la distancia y rendimiento máximos, use un cable Cat6 con
conductores de alambre sólido 24 AWG. Usar cable Cat6 de alambre trenzado
o cable con un número de calibre (AWG) mayor de 24 AWG resultará en una
distancia de extensión más corta. Un cableado de mayor calibre, como 26 AWG,
tiene capacidad de transmisión más limitada que el cableado de menor calibre.
Todos los cables Cat6 de la Serie N202 de Tripp Lite usan cableado de alambre
sólido 24 AWG.
El diagrama de instalación muestra la unidad transmisora local B127-004-D4H.
La instalación del B127-002-D2H es la misma, excepto solo hay 2 puertos
remotos y no hay puerto de monitor local.
No se requiere alimentación externa para el B127-100-H o B127-100-H-SR.
Juego extensor
B127-004-D4H
MONITOR
LOCAL OPCIONAL
PC
B127-004-D4H
B127-100-H
B127-100-H-SR
B127-100-H
B127-100-H-SR
Cable Cat6 de hasta 38 m [125 pies] a 4K/60 Hz
Cable Cat6 de hasta 15.24 m [50 pies] a 4K/60 Hz
Cable HDMI 2.0 de hasta 4.6 m [15 pies] a 4K/60 Hz
Cable DisplayPort de hasta 4.6 m [15 pies] a 4K/60 Hz
2
1
3
4
19-01-458-93393A.indb 20 3/8/2019 2:42:23 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Tripp Lite 4K/60 DisplayPort over Cat6 Extenders and Splitters Le manuel du propriétaire

Taper
Le manuel du propriétaire