Tripp Lite B127P-002-H Le manuel du propriétaire

Catégorie
Séparateurs vidéo
Taper
Le manuel du propriétaire
1
Owner’s Manual
4K/60 HDMI over Cat6 Extenders
and Splitters, Multi-Resolution
Function Support
Local Unit Models: B127P-002-H, B127P-004-H
Remote Unit Models: B127P-100-H, B127P-100-H-SR
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be automatically entered to win an
ISOBAR surge protector in our monthly drawing!
tripplite.com/warranty
Español 17 • Français 33 • Русский 49
2
Package Contents
Product Features
B127P-002-H
B127P-004-H
B127P-100-H
B127P-100-H-SR
Local (L) Unit or Remote (R) Unit L L R R
External Power Supplies (0 or 1) 1 1 0 0
Mounting Hardware Y Y Y N
All
Support a maximum video resolution of 4K (3840 x 2160) @
60 Hz with 4:4:4 Chroma Subsampling
Support up to 7.1-channel surround sound audio
HDMI 2.0, HDCP 2.2 and HDR compatible
Plug and play—no software or drivers required
3
Product Features
B127P-002-H
2-Port HDMI over Cat6 Extender/Splitter Local Transmitter Unit
Splits an HDMI signal into two
Works in tandem with Tripp Lite’s B127P-100-H and B127P-100-H-SR
receiver units to extend an HDMI signal
Power over Cable (PoC) function to transfer power to remote receivers
Supports 4K (3840 x 2160) @ 60 Hz and 1080 @ 60 Hz signals
Multi-resolution function allows displays with varying resolutions to co-
exist in a single application without downgrading signal quality to the
lowest resolution
Includes mounting hardware that allows unit to be wall-mounted, rack-
mounted or pole-mounted
B127P-004-H
4-Port HDMI over Cat6 Extender/Splitter Local Transmitter Unit
Splits an HDMI signal into four
Works in tandem with Tripp Lite’s B127P-100-H and B127P-100-H-SR
receiver units to extend an HDMI signal
Power over Cable (PoC) function to transfer power to remote receivers
Supports 4K (3840 x 2160) @ 60 Hz and 1080 @ 60 Hz signals
Multi-resolution function allows displays with varying resolutions to co-
exist in a single application without downgrading signal quality to the
lowest resolution
Includes an additional HDMI port, which can be used to connect a
local monitor or to daisy-chain additional B127P-004-H units (up to
three units can be daisy-chained together)
Includes mounting hardware that allows unit to be wall-mounted, rack-
mounted or pole-mounted
4
Product Features
B127P-100-H
HDMI over Cat6 Power over Cable (PoC) Remote Receiver Unit
Works with B127P-002-H and B127P-004-H extender/splitters to
extend a 4K @ 60 Hz signal up to 125 ft. (38 m) from the source
Built-in equalization control for video image auto-adjustment
Supports 4K (3840 x 2160) @ 60 Hz and 1080 @ 60 Hz signals
Multi-resolution function allows displays with varying resolutions to
co-exist in a single application without downgrading signal quality to
the lowest resolution
Includes mounting hardware that allows unit to be wall-mounted, rack-
mounted or pole-mounted
B127P-100-H-SR
HDMI over Cat6 Power over Cable (PoC) Short Distance Remote
Receiver Unit
Works with B127P-002-H and B127P-004-H extender/splitters to
extend a 4K @ 60 Hz signal up to 50 ft. (15 m) from the source
Built-in equalization control for video image auto-adjustment
Supports 4K (3840 x 2160) @ 60 Hz and 1080 @ 60 Hz signals
Multi-resolution function allows displays with varying resolutions to
co-exist in a single application without downgrading signal quality to
the lowest resolution
Built-in 6 in. HDMI pigtail cable attaches directly to HDMI port at
display
Optional Accessories:
N202-Series Cat6 24 AWG Solid Wire Patch Cables
P569-XXX-CERT or P568-XXX-2A Series High-Speed HDMI 2.0 Cables
5
Disclaimer
Before installation, please check the following settings of your source(s)
and TV/monitor(s):
1. Set to display 60 Hz. Double-check factory settings, as default can
be set to a lower frequency (Hz) than advertised.
2. Ensure the input setting of your monitor is set at HDMI 2.0. Some
displays may have default setting at HDMI 1.4.
3. Verify your monitor has the HDR feature enabled. Some displays
may have this feature disabled as a factory setting.
4. Check if the Ultra HD (UHD) Deep Color setting is enabled on your TV/
monitor. Confirm with your TV/monitor manufacturer which HDMI ports
support UHD Deep Color.
Note: If you wish to connect a local monitor to your installation, depending
on your TV/monitor make/model, the UHD Deep Color setting may need to be
disabled on your local TV/monitor to achieve 4K 60 Hz resolution.
6
Mounting Instructions (select models only)
The B127P-002-H, B127P-004-H and B127P-100-H include mounting
hardware that allows for a variety of mounting methods. The following
images illustrate how the included mounting brackets can be attached for
different installations.
Note: The model shown in the below images is for illustrative purposes only. Your
product may vary by model number, size or port orientation. The mounting options
for all over-IP units are the same.
Wall-mount
19” Rack-mount Pole-mount
7
Standard Extender/Splitter Installation
Notes:
1) Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid-wire Cat6
cable. Using stranded-wire Cat6 cable, or cable with a higher gauge size like
26 AWG, will result in a shorter extension distance since the cable will have a
more limited transmission capability. All Tripp Lite N202-Series Cat6 cables are
made with 24 AWG solid-wire cabling.
3) The installation diagram shows the B127P-004-H local transmitter unit. The
B127P-002-H installation is the same, except there are only two remote ports
and no local port monitor.
4) External power is not required for the B127P-100-H and B127P-100-H-SR units
due to Power over Cable (PoC) technology incorporated in the transmitter units.
B127P-004-H extender kit
B127P-100-H-SR
B127P-100-H
B127P-100-H
B127P-004-H
B127P-100-H-SR
HDR PLAYER
OPTIONAL
LOCAL MONITOR
Up to 125 ft. (38 m) Cat6 cable at 4K/60Hz
Up to 50 ft. (15 m) Cat6 cable at 4K/60Hz
Up to 15 ft. (5 m) HDMI 2.0 cable at 4K/60Hz
Up to 16 ft. (5 m) HDMI 1.4 cable at 1080p/60Hz
1 3
2 4
8
Standard Extender/Splitter Installation
1. Make sure all equipment in the installation—such as TVs, Blu-ray
players and the transmitter—is powered OFF.
2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or
P568-XXX-2A Series cables), connect the HDMI source to the INPUT
port on the B127P-002-H or B127P-004-H.
3. Optional for B127P-004-H: Using an HDMI 2.0 cable (such as
Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cables), connect an
HDMI monitor to the LOCAL port on the B127P-004-H unit.
4. Using Cat6 cable, connect the RJ45 port on the local transmitter unit
to the RJ45 port on the remote receiver unit.
5. Repeat Step 4 for each additional remote unit being connected.
6. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or
P568-XXX-2A Series cables), connect the remote receiver unit’s HDMI
port to a monitor.
7. Turn the power on to your connected TVs/monitors. The LOCAL
(orange) LED will illuminate to indicate the local port has been
connected to a display.
8. Connect the external power supply to the local transmitter unit, and
plug it into an available wall outlet or (optional) a Tripp Lite Surge
Protector, Power Distribution Unit (PDU) or Uninterruptible Power
Supply (UPS). The POWER (green) LED on the local transmitter unit
will illuminate to indicate the unit is receiving power from the external
power supply. The POWER (green) LED on the remote receiver unit
will illuminate to indicate the unit is receiving power from the local
transmitter unit through PoC technology.
9. Turn on the power to the HDMI source. The OUTPUT (orange) LED
on the local transmitter unit illuminates to indicate a signal is being
received from the source. Additionally, the OUTPUT (orange) LED will
illuminate for each port signal connection.
9
Standard Extender/Splitter Installation
10. The (orange) RJ45 LED will illuminate on both local transmitter and
remote receiver units to indicate a signal is being received from
source to display. The screen should now display on the connected
monitor(s).
Extender/Splitter Daisy-Chain
Installation
Notes:
1) Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid-wire Cat6
cable. Using stranded-wire Cat6 cable, or cable with a higher-gauge size like
26 AWG, will result in a shorter extension distance since the cable will have a
more limited transmission capability. All Tripp Lite N202-Series Cat6 cables are
made with 24 AWG solid-wire cabling.
3) Using the B127P-100-H, a 4K/60Hz signal can be extended up to 125 ft. (38 m)
from the source. Using a B127P-100-H-SR, a 4K/60Hz signal can be extended
up to 50 ft. (15 m) from the source.
10
Level 1
Level 2
Level 3
OPTIONAL
LOCAL
MONITOR
HDR PLAYER
B127P-004-H
B127P-004-H
B127P-004-H
Up to 125 ft. (38 m) Cat6 cable at 4K/60 Hz
Up to 50 ft. (15 m) Cat6 cable at 4K/60 Hz
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz
Up to 6 ft. (1.8 m) HDMI 2.0 cable at 4K/60 Hz
1
3
2
4
Extender/Splitter Daisy-Chain
Installation
11
Extender/Splitter Daisy-Chain
Installation
1. Make sure all equipment in the installation—such as TVs, Blu-ray
players and the transmitter—is powered OFF.
2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or
P568-XXX-2A Series cables), connect the HDMI source to the INPUT
port on the B127P-004-H unit.
3. Using a 6 ft./1.83 m HDMI 2.0 cable (such as Tripp Lite
P569-006-CERT or P568-006-2A cables), connect the LOCAL port on
the B127P-004-H to the INPUT port on a second B127P-004-H unit.
4. Repeat step 3 if connecting a third B127P-004-H unit.
Note: Only three levels of splitters can be cascaded.
5. Optional: Using an HDMI 2.0 cable (such as Tripp Lite
P569-XXX-CERT or P568-XXX-2A Series cables), connect a local
monitor to the LOCAL HDMI port of the last B127P-004-H unit in the
installation.
6. Using Cat6 cable, connect one of the RJ45 output ports on the
local transmitter units to the RJ45 input port on a B127P-100-H or
B127P-100-H-SR remote receiver unit.
7. Repeat step 6 for each additional remote unit being connected.
8. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or
P568-XXX-2A Series cables), connect the B127P-100-H or
B127P-100-H-SR to a display.
9. Repeat step 8 for each additional monitor you are connecting to a
remote receiver unit.
10. Turn on the power to all your connected displays.
11. Connect the external power supply to the local transmitter unit and
plug it into an available wall outlet or (optional) a Tripp Lite Surge
Protector, Power Distribution Unit (PDU) or Uninterruptible Power
Supply (UPS). The POWER (green) LED will illuminate to indicate the
unit is receiving power from the external power supply.
12
12. Repeat step 11 for each additional B127P-004-H unit in the daisy
chain.
13. B127P-100-H and B127P-100-H-SR: The green and orange LEDs
will illuminate, with the green LED indicating the unit is receiving
power from the extender/splitter, and the orange LED indicating the
unit is connected to a powered ON local unit via Cat6 cable.
14. Turn on the power to the HDMI source. The orange RJ45 LEDs will
illuminate on the B127P-004-H to indicate the unit is receiving
a signal from the source. The screen should now display on the
connected monitors.
Extender/Splitter Daisy-Chain
Installation
13
1. Using a splitter, if one display’s color is abnormal, set the player’s
deep color setting to “turn off.”
2. When source is 4K/60 4:2:2 HDR, the output can’t display
1080p/60Hz quality.
If unable to receive an acceptable image after following the installation
instructions, try the following troubleshooting tips:
Resolution Comparison Tables
Port Connect TV Real Resolution
SOURCE
4K/60Hz
Situation 1
1 4K/60Hz 4K/60Hz
2-4 4K/60Hz 4K/60Hz
Situation 2
1 4K/60Hz 4K/60Hz
2-4 4K/30Hz 1080p/60Hz
Situation 3
1 4K/60Hz 4K/60Hz
2-4 1080p/60Hz 1080p/60Hz
Situation 4
1 4K/30Hz 4K/30Hz
2-4 4K/30Hz 4K/30Hz
Situation 5
1 4K/30Hz 4K/30Hz
2-4 1080p/60Hz 1080p/60Hz
Situation 6
1 1080p/60Hz 1080p/60Hz
2-4 1080p/60Hz 1080p/60Hz
Troubleshooting
14
Troubleshooting
Port Connect TV Real Resolution
SOURCE
4K/30Hz
Situation 1
1 4K/60Hz 4K/30Hz
2-4 4K/60Hz 4K/30Hz
Situation 2
1 4K/60Hz 4K/30Hz
2-4 4K/30Hz 4K/30Hz
Situation 3
1 4K/60Hz 4K/30Hz
2-4 1080p/60Hz 1080p/60Hz
Situation 4
1 4K/30Hz 4K/30Hz
2-4 4K/30Hz 4K/30Hz
Situation 5
1 4K/30Hz 4K/30Hz
2-4 1080p/60Hz 1080p/30Hz
Situation 6
1 1080p/60Hz 1080p/60Hz
2-4 1080p/60Hz 1080p/60Hz
Port Connect TV Real Resolution
SOURCE
1080P/60Hz
Situation 1
1 4K/60Hz 1080p/60Hz
2-4 4K/60Hz 1080p/60Hz
Situation 2
1 4K/60Hz 1080p/60Hz
2-4 4K/30Hz 1080p/60Hz
Situation 3
1 4K/60Hz 1080p/60Hz
2-4 1080p/60Hz 1080p/60Hz
Situation 4
1 4K/30Hz 1080p/60Hz
2-4 4K/30Hz 1080p/60Hz
Situation 5
1 4K/30Hz 1080p/60Hz
2-4 1080p/60Hz 1080p/30Hz
Situation 6
1 1080p/60Hz 1080p/60Hz
2-4 1080p/60Hz 1080p/60Hz
15
Warranty and Product Registration
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and
workmanship for a period of one (1) year from the date of initial purchase.
TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its
sole option) any such defective products. To obtain service under this warranty, you
must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or
an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE
or an authorized TRIPP LITE service center with transportation charges prepaid and
must be accompanied by a brief description of the problem encountered and proof
of date and place of purchase. This warranty does not apply to equipment which
has been damaged by accident, negligence or misapplication or has been altered or
modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied
warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the
purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost
profits or revenue, loss of equipment, loss of use of equipment, loss of software,
loss of data, costs of substitutes, claims by third parties, or otherwise.
PRODUCT REGISTRATION
Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
16
Warranty and Product Registration
WEEE Compliance Information for Tripp Lite Customers and Recyclers
(European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and
implementing regulations, when customers buy new electrical and electronic
equipment from Tripp Lite they are entitled to:
Send old equipment for recycling on a one-for-one, like-for-like basis
(this varies depending on the country)
Send the new equipment back for recycling when this ultimately becomes
waste
WARNING
Use of this equipment in life support applications where failure of this equipment
can reasonably be expected to cause the failure of the life support equipment or to
significantly affect its safety or effectiveness is not recommended.
Tripp Lite has a policy of continuous improvement. Specifications are subject to
change without notice. Photos and illustrations may differ slightly from actual
products.
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
19-05-083 93-396F_RevA
17
Manual del Propietario
Extensores y Divisores HDMI
4K / 60 sobre Cat6, Soporte de
Función de Resolución Múltiple
Modelos de Unidad Local: B127P-002-H, B127P-004-H
Modelos de Unidad Remota: B127P-100-H, B127P-100-H-
SR
1111 W. 35th Street, Chicago, IL 60609 EE. UU. • tripplite.com/support
Copyright © 2019 Tripp Lite. Todos los derechos reservados.
English 1 • Françaís 33 • Русский 49
18
Contenido del Empaque
Características del Producto
B127P-002-H
B127P-004-H
B127P-100-H
B127P-100-H-SR
Unidad Local (L) o Unidad Remota (R) L L R R
Fuentes de Alimentación Externas (0 o 1) 1 1 0 0
Accesorios de instalación Y Y Y N
Todas
Soportan una resolución de video de 4K (3840 x 2160) @ 60 Hz con
Submuestreo de Croma 4:4:4
Soporta audio de sonido envolvente de hasta 7.1 canales
Compatible con HDMI 2.0, HDCP 2.2 y HDR
Conectar y Usar—No requiere software ni controladores
19
Características del Producto
B127P-002-H
Unidad Transmisora Local Extensor Divisor HDMI sobre Cat6 de 2 Puertos
Divide una señal HDMI en dos
Trabaja en tándem con las unidades receptoras B127P-100-H y
B127P-100-H-SR para extender una señal HDMI
Función de Energía por Cable (PoC) para transferir energía a receptores
remotos
Soporta señales de 4K (3840 x 2160) a 60 Hz y de 1080 a 60 Hz
La función de resolución múltiple permite que pantallas con diferentes
resoluciones coexistan en una única aplicación sin degradar la calidad
de señal a la menor resolución
Incluye los accesorios de instalación que permiten que la unidad sea
instalada en rack, en la pared o en poste.
B127P-004-H
Unidad Transmisora Local Extensor Divisor HDMI sobre Cat6 de 4 Puertos
Divide una señal HDMI en cuatro
Trabaja en tándem con las unidades receptoras B127P-100-H y
B127P-100-H-SR para extender una señal HDMI
Función de Energía por Cable (PoC) para transferir energía a receptores
remotos
Soporta señales de 4K (3840 x 2160) a 60 Hz y de 1080 a 60 Hz
La función de resolución múltiple permite que pantallas con diferentes
resoluciones coexistan en una única aplicación sin degradar la calidad
de señal a la menor resolución
Incluye un puerto HDMI adicional que puede utilizarse para conectar
un monitor local o unidades B127P-004-H adicionales en cadena
(pueden encadenarse hasta tres unidades juntas)
Incluye los accesorios de instalación que permiten que la unidad sea
instalada en rack, en la pared o en poste.
20
Características del Producto
B127P-100-H
Unidad Receptora Remota con Energía por Cable (PoC) HDMI sobre
Cat6
Trabaja con los Extensores Divisores B127P-002-H y B127P-004-H
para extender una señal 4K / 60Hz hasta a 38 m [125 pies] de la
fuente
Control de ecualización incorporado para ajuste automático de imagen
de video
Soporta señales de 4K (3840 x 2160) a 60 Hz y de 1080 a 60 Hz
La función de resolución múltiple permite que pantallas con diferentes
resoluciones coexistan en una única aplicación sin degradar la calidad
de señal a la menor resolución
Incluye los accesorios de instalación que permiten que la unidad sea
instalada en rack, en la pared o en poste.
B127P-100-H-SR
Unidad Receptora Remota de Corta Distancia con Energía por Cable
(PoC) HDMI sobre Cat6
Trabaja con los Extensores y Divisores B127P-002-H y B127P-004-H
para extender una señal 4K / 60Hz hasta a 38 m [125 pies] de la
fuente
Control de ecualización incorporado para ajuste automático de imagen
de video
Soporta señales de 4K (3840 x 2160) a 60 Hz y de 1080 a 60 Hz
La función de resolución múltiple permite que pantallas con diferentes
resoluciones coexistan en una única aplicación sin degradar la calidad
de señal a la menor resolución
El cable flexible de 15.2 cm [6"] HDMI se conecta directamente al
puerto HDMI en la pantalla
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

Tripp Lite B127P-002-H Le manuel du propriétaire

Catégorie
Séparateurs vidéo
Taper
Le manuel du propriétaire

dans d''autres langues