Samsung DVD-1080P9 Manuel utilisateur

Marque: Samsung

Modèle: DVD-1080P9

Catégorie: Lecteurs DVD

Taper: Manuel utilisateur

Ce manuel convient également à

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/global/register

DVD Player

user manual

DVD-1080P9

DVD-1080PR

AK68-01750B(01)

2_ getting started

getting started

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has

two blades with one wider than the other. A grounding type plug has two blades and a third

grounding prong.

The wide blade or the third prong are provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched: particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long peroids of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

English _3

● GETTING STARTED

Precautions

This symbol indicates that

dangerous voltage consisting a risk

of electric shock is present within

this unit.

This symbol indicates that there are

important operating and maintenance

instructions in the literature

accompanying this unit.

Do not install this equipment in a confined space such as a bookcase or similar unit.

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

FCC NOTE (for U.S.A):

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on.

The user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This class B digital apparatus meets all requirements of the Canadian Interference --

Causing Equipment Regulations.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

PRODUCTO LÁSER CLASE 1

Note to CATV system installer : This reminder is provided to call CATV system installer’s attention

to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that

provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be

connected to the grounding system of the building as close to the point of cable entry as practical.

Caution : FCC regulations state that any unauthorized changes or modifications to this equipment may

void the user’s authority to operate it.

• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,

shall be placed on the apparatus.

• If this power supply is used at 240V ac, a suitable plug adapter should be used.

CALIFORNIA USA ONLY :

This Perchlorate warning applies only to primary CR (Maganese Dioxide) Lithium coin cells in the product

sold or distributed ONLY in California USA “Perchlorate Material - special handling may apply”, See www.dtsc.

ca.gov/hazardouswaste/perchlorate.

4_ getting started

getting started

CAUTION

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT

IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR

YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

Note:

•

This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.

•

This DVD player is designed and manufactured to respond to the Region Management Information.

If the Region number of a DVD disc does not correspond to the Region number of this DVD player,

the DVD player cannot play the disc.

• The product unit accompanying this user manual is licensed under certain intellectual property

rights of certain third parties. In particular, this product is licensed under the following US patents:

5,457,669 5,561,649 5,705,762 5,987,417 6,043,912 6,222,983 6,272,096 6,377,524

6,377,531 6,385,587 6,389,570 6,408,408 6,466,532 6,473,736 6,477,501 6,480,829 6,556,520

6,556,521 6,556,522 6,578,163 6,594,208 6,631,110 6,658,588 6,674,697 6,674,957 6,687,455

6,697,307 6,707,985 6,721,243 6,721,493 6,728,474 6,741,535 6,744,713 6,744,972 6,765,853

6,765,853 6,771,890 6,771,891 6 775,465 6,778,755 6,788,629 6,788,630 6,795,637 6,810,201

6,862,256 6,868,054 6,894,963 6,937,552.

This license is limited to private non-commercial use by end-user consumers for licensed contents.

No rights are granted for commercial use. The license does not cover any product unit other than this

product unit and the license does not extend to any unlicensed product unit or process conforming to

ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit.

The license only covers the use of this product unit to encode and/or decode audio files conforming

to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product

features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

Handling Cautions

• Before connecting other components to this player, be sure to turn them all off.

• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the

player’s internal parts may be damaged.

• Do not put a flower vase filled with water or any small metal objects on the player.

• Be careful not to put your hand into the disc tray.

• Do not place anything other than the disc in the disc tray.

• Exterior interference such as lightning and static electricity can affect normal operation of this player.

If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect

the AC power cord to the AC power outlet. The player will operate normally.

• Be sure to remove the disc and turn off the player after use.

• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long

periods of time.

• Clean the disc by wiping in a straight line from the inside to the outside of the disc.

• The Main plug is used as a disconnect device and shall stay readily operable at any time.

Disc Storage

Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.

• Do not keep under direct sunlight.

• Keep in a cool ventilated area.

• Store vertically.

• Keep in a clean protection jacket.

Maintenance of Cabinet

For safety reasons, be sure to disconnect the AC power cord from the AC outlet.

• Do not use benzene, thinner, or other solvents for cleaning.

• Wipe the cabinet with a soft cloth.

English _5

● GETTING STARTED

Install Batteries in the Remote control

Open the battery

cover on the back of

the remote control.

Insert two AAA batteries.

Make sure that the

polarities (+ and -) are

aligned correctly.

Replace the battery

cover.

If the remote control doesn’t operate properly:

- Check the polarity + - of the batteries.

- Check if the batteries are drained.

- Check if the remote control sensor is blocked by obstacles.

- Check if there is any fluorescent lighting nearby.

Before you start

Accessories

Remote Control

Batteries for

Remote Control

(AAA Size)

User’s Manual Video/Audio

Cable

6_ getting started

getting started

ADVANCED FUNCTIONS

Adjusting the Aspect Ratio (EZ View)

Selecting the Audio Language

Selecting the Subtitle Language

Changing the Camera Angle

Using the Bookmark Function

Using the Zoom Function

Clips Menu for MP3/WMA/JPEG/MPEG4/

CD Audio

Folder Selection

MP3/WMA/CD Audio Playback

MPEG4 Playback

Playing Media Files using the USB HOST

feature

CD Ripping

Picture CD Playback

Picture CD Playback for HD-JPEG

BASIC FUNCTIONS

Playing a Disc

Using the Search and Skip Functions

Using the Display Function

Using the Disc and Title Menu

Repeat Play

Slow Play

CONNECTIONS

12 Choosing a Connection

12 Connecting to a TV with HDMI Jack

12 Connecting to a TV with DVI Jack

14 Connecting to a TV (Progressive)

15 Connecting to a TV (Interlace)

16 Connecting to a TV (Video)

17 Connecting to an Audio System (2 Channel

Ampliﬁ er)

18 Connecting to an Audio System (Dolby

digital, MPEG2 or DTS Ampliﬁ er)

GETTING STARTED

3 Precautions

5 Before you Start

7 General features

8 Disc Type and Characteristics

9 Description

11 Tour of the Remote Control

NAVIGATING THE SETUP MENU

Using the Setup Menu

Setting Up the Language Features

Setting Up the Audio Options

Setting Up the Display Options

Setting Up the Parental Control

Setting Up HDMI

Setting Up Anynet+(HDMI-CEC)

Setting Up the Picture Quality

Setting Up the BD Wise

REFERENCE

Firmware Upgrade

Troubleshooting

Specifications

English _7

● GETTING STARTED

General Features

Excellent Sound

Dolby Digital, a technology developed by Dolby

Laboratories, provides crystal clear sound

reproduction.

Screen

Both regular and widescreen(16:9) pictures can be

viewed.

Slow Motion

An important scene can be viewed in slow motion.

1080p Playback

This player upconverts regular DVDs for playback

on 1080p TVs.

Parental Control (DVD)

The parental control allows users to set the level

necessary to prohibit children from viewing harmful

movies such as those with violence, adult subject

matter, etc.

Various On-Screen Menu Functions

You can select various languages (Audio/Subtitle)

and screen angles while enjoying movies.

Progressive Scan

Progressive scanning creates an improved picture

with double the scan lines of a conventional

interlaced picture.

EZ VIEW (DVD)

Easy View enables picture adjustment to match your

TV's screen size (16:9 or 4:3).

Digital Photo Viewer (JPEG)

You can view Digital Photos on your TV.

Repeat

You can repeat a song or movie simply by pressing

the REPEAT button.

MP3/WMA

This unit can play discs created from MP3/WMA files.

MPEG4

This unit can play MPEG4 formats within an avi file.

HDMI (High Definition Multimedia

Interface)

HDMI reduces picture noise by allowing a pure

digital video/audio signal path from the player to

your TV.

CD Ripping

This feature lets you to copy audio files from a disc

into MP3 format on a USB device. (Audio CD only (CD

DA)).

Note

- Discs which cannot be played with this

player.

• DVD-ROM • DVD-RAM

• CD-ROM • CDV

• CDI • CVD

• CDGs play audio only, not graphics.

- Ability to play back may depend on

recording conditions.

• DVD-R, +R

• CD-RW

• DVD+RW, -RW (V mode)

- The unit may not play certain CD-R, CD-

RW and DVD-R due to the disc type or

recording conditions.

COPY PROTECTION

Many DVD discs are encoded with copy

protection. Because of this, you should only connect

your DVD player directly to your TV, not to a VCR.

Connecting to a VCR results in a distorted picture

from copy-protected DVD discs.

This product incorporates copyright protection

technology that is protected by methods claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection

technology must be authorized by Macrovision

Corporation, and is intended for home and

other limited viewing uses only unless otherwise

authorized by Macrovision Corporation. Reverse

engineering or disassembly is prohibited.

PROGRESSIVE SCAN OUTPUTS

(480p, 720p, 1080p)

“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH

DEFINITION TELEVISION SETS ARE FULLY

COMPATIBLE WITH THIS PRODUCT AND MAY

CAUSE ARTIFACTS TO BE DISPLAYED IN THE

PICTURE, IF PROGRESSIVE SCAN PICTURE

PROBLEMS OCCUR, IT IS RECOMMENDED THAT

THE USER SWITCH THE CONNECTION TO THE

‘STANDARD DEFINITION’ (VIDEO) OUTPUT. IF

THERE ARE QUESTIONS REGARDING YOUR TV

SET COMPATIBILITY WITH THIS DVD PLAYER,

PLEASE CONTACT SAMSUNG'S CUSTOMER

SERVICE CENTER.”

8_ getting started

getting started

Disc Type and Characteristics

This DVD player is capable of playing the following types of discs with the corresponding logos:

Region Number

Both the DVD player and the discs

are coded by region. These regional

codes must match in order for the disc

to play. If the codes do not match, the

disc will not play.

The Region Number for this player

is described on the rear panel of the

player.

5”

3 1/2”

Single-sided 240 min.

Double-sided 480 min.

Single-sided 80 min.

Double-sided 160 min.

Audio

Video

- DVD contains excellent sound and

video due to Dolby Digital and

MPEG-2 system.

- Various screen and audio functions

can be easily selected through the

on-screen menu.

Disc Types (Logos)

Recording Types Disc Size Max. Playing Time

Characteristics

DVD

5”

3 1/2”

74 min.

20 min.

Audio

- CD contains Digital content with

better audio quality, less distortion

and less deterioration of audio

quality over time.

AUDIO-CD

Disc Markings

DIGITAL

SOUND

STEREO

NTSC

Play Region Number

NTSC broadcast system in U.S.A, Canada, Korea,

Japan, etc.

Dolby Digital disc

Stereo disc

Digital Audio disc

DTS disc

MP3 disc

You must only insert one DVD disc at a time.

Inserting two or more discs will not allow

playback and may cause damage to the DVD

player.

DivX Certification

DivX, DivX Certified,

and associated logos are

trademarks of DivXNetworks, Inc and

are used under license

English _9

● GETTING STARTED

Description

Front Panel Controls

1. DISC TRAY

Place the disc here.

2. OPEN/CLOSE ( )

Press to open and close the disc tray.

3. DISPLAY

Operation indicators are displayed here.

4. PLAY/PAUSE ( )

Begin or pause disc play.

5. SKIP ( ) / SEARCH

Use to forward skip a scene or music.

6. STOP ( )

Stops disc play.

7. SKIP ( ) / SEARCH

Use to reverse skip a scene or music.

8. USB HOST

Connect a digital still camera, MP3 player, memory stick,

Card reader and other removable storage devices.

9. STANDBY/ON ( )

Turn On/Off the DVD Player.

Front Panel Display

DVD

HDMI

1080iP720P

USB

1. Disc Indicator : DVD Video, Audio

CD, CD-R/RW, DVD-R/RW/RAM,

DVD+R/RW

2. DVD VIEW indicator

3. CD indicator

4. USB indicator

5. Disc Media indicator : DVD-R, DVD-

RW, DVD+R, DVD+RW

6. HDMI indicator :

HDMI 480P ➔ “HDMI”,

HDMI 720P ➔ “HDMI + 720P”,

HDMI 1080i ➔ “HDMI + 1080i”,

HDMI 1080P ➔ “HDMI + 1080P”

7. Displays the Total playing time and

various messages concerning

operations such as PLAY, STOP,

LOAD ...

noDISC: No disc loaded.

OPEN: The disc tray is open.

LOAD: Player is loading disc information.

10_ getting started

getting started

Rear Panel

1. AUDIO OUT JACKS

- Use audio cables to connect to the Audio input jacks

of your television or audio/video receiver

2. DIGITAL AUDIO JACKS

- Use either an coaxial digital cable to connect to a

compatible Dolby Digital receiver.

- Use either an coaxial digital cable to connect to an A/V

Amplifier that contains a Dolby Digital, MPEG2 or DTS

decoder.

3. VIDEO OUT JACK

- Use a video cable to connect to the Video input jack

on your television.

4. COMPONENT VIDEO OUT JACKS

- Use these jacks if you have a TV with Component

Video in jacks. These jacks provide P

, P

and Y

video.

- If

P-SCAN

is set to “ON” in Video Output of the

Setup Menu, progressive scan mode will work.

- If

I-SCAN

is set to “ON” in Video Output of the Setup

Menu, interlaced scan mode will work.

5. HDMI OUT JACK

- Use an HDMI cable to connect this jack to the HDMI

jack on your television for the best quality picture.

- If an HDMI cable is connected to an HDMI-compatible

TV, HDMI will be output automatically from the player

about 10 seconds later.

Note

- Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the

TV’s menu system.

- The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conversion

adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.

- Refer to the TV's instruction manual for detailed information regarding the TV’s HDMI input jack.

- See pages 51~ 52 to get more information on how to use the setup menu.

English _11

● GETTING STARTED

Tour of the Remote Control

1. DVD POWER Button

Turns the power on or off.

2. NUMBER Buttons

3. SUBTITLE (Number 4) Button

4. TITLE MENU (number 7) Button

Brings up the Title menu.

5. ZOOM/-/-- Button

Enlarges the DVD Picture.

Use this button to select additional channel broadcast

by the same TV network.(For example: 5-1).

6. TV VOL (+, -) Buttons

Control volume.

7. SEARCH Buttons (

)

Allow you to search forward/backward through a disc.

8. VIDEO SEL. Button

Changes video output mode

9. SKIP Buttons (

)

Use to skip the title, chapter or track.

10. STOP Button ( )

11. MENU Button

Brings up the DVD player’s menu.

12. ENTER/π

†

√

® Buttons

This button functions as a toggle switch.

13. INFO Button

Displays the current disc mode.

14. DISC MENU Button

Brings up the Disc menu.

15. OPEN/CLOSE ( ) Button

To open and close the disc tray.

16. HDMI SEL. Button

HDMI Output resolution setup.

17. DVD Button

Use to operate DVD.

18. TV Button

Use to operate a Samsung TV.

19. EZ VIEW (Number 6) Button

The aspect ratio of a picture can easily be adjusted

according to the screen size of your TV (16:9 or 4:3).

20. AUDIO (Number 5) Button

Use this button to access various audio functions on a disc.

21. BOOKMARK (Number 9) Button

22. REPEAT A-B (Number 8) Button

Allows you to repeat play a chosen section (A-B) on a disc.

23. STEP/TV SOURCE Button

Advances play one frame at a time.

24. TV CH ( , ) Buttons

Channel selection.

25. PAUSE Button ( )

Pause disc play.

26. PLAY Button ( )

Begins disc play.

27. RETURN Button

Returns to a previous menu.

28. EXIT Button

Exit the on-screen menu.

29. CANCEL Button

Use to remove menus or status displays from the screen.

30. USB Button

31. REPEAT Button

Allows you to repeat play a title, chapter, track, or disc.

12_ connections

connections

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a

TV and other components.

Before Connecting the DVD Player

- Always turn off the DVD player, TV, and other components before you connect or disconnect

any cables.

- Refer to the user’s manual of the additional components (such as a TV) you are connecting for

more information on those particular components.

Connecting to a TV with HDMI Jack

Using an HDMI-HDMI cable (not included) connect the HDMI

OUT jack on the rear of the DVD player to the HDMI IN jack of

your TV.

Press the input selector button on your TV remote control until

the HDMI signal from the DVD player appears on your TV

screen.

HDMI cable

(Not Included)

Connecting to a TV with DVI Jack

Using an HDMI-DVI cable (not included), connect the HDMI

OUT jack on the rear of the DVD player to the DVI IN jack of

your TV.

Using the audio cables, connect the AUDIO (red and white)

OUT jacks on the rear of the DVD player to the AUDIO

(red and white) IN jacks of your TV.

Turn on your DVD player and TV.

Press the input selector button on your TV remote control until

the DVI signal from the DVD player appears on your TV screen.

RED

WHITE

RED

WHITE

HDMI-DVI cable

(Not Included)

Audio Cable

(Included)

English _13

● CONNECTIONS

HDMI VIDEO Specifications

When you press the HDMI SEL. button, the 480p, 720p, 1080i and 1080p resolutions are selected in order.

The first press of the HDMI SEL. button, brings up the current resolution.

The second press allows you to change the HDMI output resolution.

- Depending on your TV, certain HDMI output resolutions may not work.

- Please refer to the user's manual of your TV.

- If an HDMI or HDMI-DVI cable is plugged into TV, the DVD player’s output is set to HDMI automatically

about 10 seconds later.

- For better picture quality, set the HDMI output resolution to 720p, 1080i or 1080p (see page 52)

- This player upconverts regular DVDs for playback on 1080p TVs. It does not play HD DVDs or Blu-Ray

discs.

- If you connect an HDMI cable between a Samsung TV and this DVD player, you can operate this DVD

player using your TV remote control. This is only available with Samsung TVs that support Anynet+(HDMI-

CEC).(see page 56-57)

- If your TV has an

logo, then it supports the Anynet+ function.

• HDMI (High Definition Multimedia Interface)

HDMI enables you to make a digital video and audio connection with a single cable.

Using HDMI, the DVD player transmits a digital video and audio signal which displays a vivid picture on a

TV having an HDMI input jack.

• HDMI connection description

HDMI connector - Video and audio are transferred digitally without compression (LPCM or Bit Stream

data).

- The player outputs a pure digital signal to the TV through an HDMI cable.

- If your TV does not support HDCP (High-bandwidth Digital content protection), snow noise appears on

the screen.

• Why does Samsung use HDMI?

Analog TVs require an analog video/audio signal. However, when playing a DVD, the signal transmitted

to a TV is digital. Therefore either a digital-to-analog converter (in the DVD player) or an analog-to-digital

converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise

and signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital

signal from the player to your TV.

• What is HDCP?

HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content output via

HDMI/DVI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and

a display device (TV, projector, etc). Content is encrypted at the source device to prevent unauthorized

copies from being made.

14_ connections

connections

Connecting to a TV (Progressive)

Using Component video cables (not included), connect the

COMPONENT VIDEO OUT jacks on the rear of the DVD player

to the COMPONENT IN jacks of your TV.

To see the progressive video output,

- Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive

Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s

menu system.

- Depending on your TV, the connection method may differ from the illustration above.

Using the audio cables, connect the AUDIO (red and white)

OUT jacks on the rear of the DVD player to the AUDIO (red

and white) IN jacks of your TV.

Turn on the DVD player and TV.

Press the input selector button on your TV remote control until

the Component signal from the DVD player appears on the TV

screen.

Set the Video Output to P-SCAN in the Display Setup menu.

(See pages 51 to 52)

You can also use the VIDEO SEL. button to change the Video

Output mode. (See page 16)

RED

WHITE

RED

WHITE

RED

BLUE

GREEN

RED

BLUE

GREEN

Audio Cable

(Included)

Component cable

(not included)

Note

- What is "Progressive Scan"?

Progressive scan has twice as many scanning lines as the interlace output method and

provides better and clearer picture quality.

English _15

● CONNECTIONS

Connecting to a TV (Interlace)

- Connecting to your TV using Component video cables. The 480i resolution is possible with this

connection.

- You will enjoy excellent quality and accurate color reproduction images. Component video

separates the picture element into black and white(Y), blue(P

), red(P

) signals to present clear

and clean images. (Audio signals are delivered through the audio output.)

Note

- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)

- The Component jacks of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “P

, P

, Y”

depending on the manufacturer. The number and position of the jacks may vary depending on the TV set.

Please refer to the user's manual of your TV.

Using Component video cables (not included), connect the

COMPONENT VIDEO OUT jacks on the rear of the DVD player

to the COMPONENT IN jacks of your TV.

Using the audio cables, connect the AUDIO (red and white)

OUT jacks on the rear of the DVD player to the AUDIO (red

and white) IN jacks of your TV.

Turn on your DVD player and TV.

Press the input selector on your TV remote control until the

Component signal from the DVD player appears on the TV

screen.

Set the Video Output to I-SCAN in the Display Setup menu.

(See pages 51 to 52)

You can also use the VIDEO SEL. button to change the Video

Output mode. (See page 16)

RED

WHITE

RED

WHITE

RED

BLUE

GREEN

RED

BLUE

GREEN

Audio Cable

(Included)

Component cable

(not included)

16_ connections

connections

Using Video/Audio cables, connect the VIDEO (yellow)/AUDIO

(red and white) OUT jacks on the rear of the DVD player to the

VIDEO (yellow)/AUDIO (red and white) IN jacks of your TV.

Turn on your DVD player and TV.

Note

- Noise may be generated if the audio cable placed too close to the power cable.

- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)

- The number and position of the jacks may vary depending on your TV set. Please refer to the user's

manual of your TV.

- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) jack of the DVD

player.

- If you press the VIDEO SEL. button when the DVD Player is in stop mode or no disc is inserted, the Video

Output mode changes in the following sequence: (I-SCAN ➝ P-SCAN).

RED

WHITE

YELLOW

RED

WHITE

YELLOW

Audio Cable

(Included)

Video Cable

(Included)

Set the Video Output to I-SCAN in the Display Setup menu.

(See pages 51 to 52).

You can also use the VIDEO SEL. button to change the Video

Output mode.

Press the input selector button on your TV remote control

until the Video signal from the DVD player appears on the TV

screen.

Connecting to a TV (Video)

English _17

● CONNECTIONS

Note

- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause

damage to the speakers and your ears.

- Please set the audio in the menu screen according to the Amplifier.(See pages 49 to 50)

- The position of jacks may vary depending on the Amplifier.

Please refer to your Amplifier’s user's manual.

Connecting to an Audio System (2 Channel Amplifier)

Using the audio cables, connect the AUDIO (red and white)

OUT jacks on the rear of the DVD player to the AUDIO (red

and white) IN jacks of the Amplifier.

Using the video signal cable(s), connect the HDMI,

COMPONENT or VIDEO OUT jacks on the rear of the DVD

player to the HDMI/DVI, COMPONENT or VIDEO IN jack of

your TV as described on pages 12 to 16.

Turn on your DVD player, TV, and Amplifier.

Press the input select button of the Amplifier to select the audio

input your DVD player is connected to in order to hear sound.

Refer to your Amplifier's user manual to set the Amplifier's

audio input.

RED

WHITE

RED

WHITE

2-Channel stereo amp

Audio Cable

(Included)

18_ connections

connections

Note

- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause

damage to the speakers and your ears.

- Please set the audio in the menu screen according to the Amplifier you have connected. (See pages 49 to 50)

- The position of jacks may vary depending on the Amplifier.

Please refer to the user's manual of the Amplifier.

Connecting to an Audio System (Dolby Digital, MPEG2 or DTS Amplifier)

If using a Coaxial cable (not included), connect the DIGITAL

AUDIO (COAXIAL) jack on the rear of the DVD player to the

DIGITAL AUDIO IN (COAXIAL) jack of the Amplifier.

Using the video signal cable(s), connect the HDMI,

COMPONENT or VIDEO OUT jacks on the rear of the DVD

player to the HDMI/DVI, COMPONENT or VIDEO IN jack of

your TV as described on pages 12 to 16.

Turn on your DVD player, TV, and Amplifier.

Press the input select button of the Amplifier to select the audio

input your DVD player is connected to in order to hear sound.

Refer to your Amplifier's user manual to set the Amplifier's

audio input.

Coaxial Cable

(not included)

Dolby Digital or

DTS amp

English _19

● BASIC FUNCTIONS

Playing a Disc

Before Play

- Turn on your TV and set it to the Video Input your DVD player is connected to with your TV’s

remote control.

- If you connected the DVD player to an external Audio System, turn on your Audio System and

set it to the correct Audio Input.

After plugging in the player, the first time you press the DVD POWER button, the screen

to the right appears: If you want to select a language, press a NUMBER button.

(This screen will only appear when you plug in the player for the first time.)

If the language for the startup screen is not set, the settings may change whenever you

turn the power on or off. Therefore, make sure that you select the language you want

to use.

Once you select a menu language, you can change it by pressing the button

on the front panel of the unit for more than 5 seconds with no disc in the unit. Then

the SELECT MENU LANGUAGE window appears again where you can reset your

preferred language.

Playback

Press the OPEN/CLOSE

( ) button the tray opens.

Place a disc gently into the

tray with the disc’s label

facing up.

Press the PLAY ( ) button

or OPEN/CLOSE (

) button

to close the disc tray.

▼

RESUME function

When you stop disc play, the player

remembers where you stopped, so when you

press the PLAY (

) button again, it will pick up

where you left off.

Select Menu Language

Press 1 for English

Touche 2 pour Français

Drücken Sie 3 für Deutsch

Pulsar 4 para Español

Premere 5 per Italiano

Druk op 6 voor Nederlands

basic functions

20_ basic functions

basic functions

Stopping Play

Press the STOP ( ) button

during play.

Note

- If the player is left in the stop mode for more

than one minute without pressing any buttons, a

screen saver will be activated. Press the PLAY

(

) button to resume normal play.

- If the player is left in the stop mode for more

than 30 minutes, the power will automatically

turn off.

Pausing Play

Press the PAUSE (

) or

STEP button on the remote

control during play.

▼

Screen stops, no sound.

To resume, press the PLAY (

) button once

again.

Note

If the player is left for about 5 minutes in pause

mode, it will stop.

Step Motion Play (Except

CD)

Press the STEP button on

the remote control during

play.

▼

Each time the button is pressed, a new frame

will appear.

No sound is heard during STEP mode.

Press the PLAY (

) button to resume normal

play.

You can only perform step motion play in the

forward direction.

▼

No sound is heard during slow mode.

Press the PLAY (

) button to resume normal

play.

Removing the Disc

Press the OPEN/CLOSE

( ) button.

Note

- The (

) icon indicates an invalid button press.

Slow Motion Play

Press the SEARCH (

)

button to choose the play

speed between 1/2, 1/4, 1/8

and 1/16 of normal speed

during PAUSE mode.

La page charge ...

Samsung DVD-1080P9 Manuel utilisateur

Marque: Samsung

Modèle: DVD-1080P9

Catégorie: Lecteurs DVD

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Samsung DVD-1080P9 User manual

Samsung DVD-1080P9 Manuel utilisateur

Ce manuel convient également à

Samsung DVD-1080P9 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents