Electrolux EXP34U338CW Le manuel du propriétaire

EN

Air Conditioner

DA

Klimaanlæg

FI

Ilmastointilaite

NO

Luftkjøler

SV

Luftkonditionering

IT

Condizionatore d’aria

FR

Climatiseur

User Manual

Brugsvejledning

Käyttöohje

Bruksanvisning

Bruksanvisninng

Manuale per l’utente

Manuel D'utilisation

2

23

44

66

86

108

130

EXP26U338CW

EXP26U538CW

EXP34U338CW

EXP35U538CW

EXP26U558CW

EXP26U758CW

EXP26U338HW

EXP26U538HW

EXP34U338HW

EXP35U538HW

EXP26U558HW

2 www.electrolux.com

Subject to change without notice.

Warning / Caution-Safety information.

General information and tips.

Environmental information.

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the following

data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Register your product for better service:

www.registerelectrolux.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.electrolux.com/shop

Visit our website to:

Get usage advice, brochures, trouble shooter, service information:

www.electrolux.com/webselfservice

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings

with it decades of professional experience and innovation. Ingenious and stylish, it

has been designed with you in mind. So whenever you use it, you can be safe in the

knowledge that you’ll get great results every time. Welcome to Electrolux.

WE’RE THINKING OF YOU

1.

SAFETY INFORMATION .................................................................................. 3

2.

SAFETY INSTRUCTION ................................................................................... 9

3.

UNIT DESCRIPTION ....................................................................................... 12

4.

ACCESSORIES INCLUDED ........................................................................... 12

5.

INSTALLATION INSTRUCTIONS ................................................................... 13

6.

AIR CONDITIONER FEATURES .................................................................... 14

7.

OPERATING INSTRUCTIONS ....................................................................... 14

8.

CARE & CLEANING ........................................................................................ 20

9.

TROUBLE SHOOTING ................................................................................... 21

10.

ENVIRONMENTAL CONCERNS .................................................................... 22

CONTENTS

3ENGLISH

1.

SAFETY INFORMATION

WARNING!

• This appliance can be used by children aged from

8 years and above and persons with reduced

physical, sensory or mental capabilities or lack

of experience and knowledge if they have been

given supervision or instruction concerning use

of the appliance in a safe way and understand

the hazards involved.

• Children shall not play with the appliance.

• If the supply cord is damaged, it must bereplaced

by the manufacturer, its service agent or similarly

qualied persons in order to avoid a hazard.

This manual explains the proper use of your new air

conditioner. Please read this manual carefully before

using the product. This manual should be kept in a safe

place for handy reference.

6\PERO 1RWH ([SODQDWLRQ

:$51,1*

&$87,21

7KLVV\PEROVKRZVWKDWWKLVDSSOLDQFHXVHV

DIODPPDEOHUHIULJHUDQW,IWKHUHIULJHUDQWLVOHDNHG

DQGH[SRVHGWRDQH[WHUQDOLJQLWLRQVRXUFHWKHUH

LVDULVNRIILUH

7KLVV\PEROVKRZVWKDWWKHRSHUDWLRQPDQXDO

VKRXOGEHUHDGFDUHIXOO\

7KLVV\PEROVKRZVWKDWDVHUYLFHSHUVRQQHOVKRXOG

EHKDQGOLQJWKLVHTXLSPHQWZLWKUHIHUHQFHWRWKH

LQVWDOODWLRQPDQXDO

7KLVV\PEROVKRZVWKDWLQIRUPDWLRQLVDYDLODEOHVXFK

DVWKHRSHUDWLQJPDQXDORULQVWDOODWLRQPDQXDO

CAUTION!

• Contact authorised service technician for repair

or maintenance of this unit.

• Contact the installer for installation of this unit.

4 www.electrolux.com

1.2

Point to Keep in Mind When Using Your

Air Conditioner

CAUTION!

Warnings for use

• Do not modify any part of this product.

• Do not insert anything into any part of the unit.

• Ensure the power supply used has an appropriate

voltage rating. Only use a 220 - 240V, 50Hz, 10A

mains electricity supply. Use of a power supply

with an improper voltage rating can result in

damage to the unit an possibly re.

1.1

Important notes

1. Do not operate unit without the air lter.

2. Do not operate unit near any heat source or open re.

3. Do not expose the unit outside to direct sunlight and rain.

4. Always store or move the unit in an upright position.

5. Do not cover the appliance when in operation

or immediately after use.

6. Always drain condensation before storing unit.

• The air conditioner is not intended for use by young

children of inrmed persons without supervision.

• Young children should be supervised to ensure

that they do not play with the air conditioner.

• There are local council rules regarding maximum

allowable noise levels emitted by air conditioners.

• If the power cord is to be replaced, replacement work

shall be performed by authorised personnel only.

• Installation work must be performed in accordance

with the national wiring standards by authorised

personnel only (if applicable). Incorrect connection

can cause overheating and re.

• Take care not to catch ngers on fan when adjusting

horizontal louvres.

• The fuse is 250V 3.15A, ceramic type.

• Cleaning and user maintenance shall not be made

by children without supervision. Be aware that

refrigerants may not contain an odour.

5ENGLISH

• This power plug must only be plugged into an

appropriate wall socket. Do not use in conjunction

with any extension cords.

• Push the power plug securely into the socket and

make sure it is not loose.

• Do not pull, deform. or modify the power supply

cord, or immerse it in water. Pulling or misuse of

the power supply cord can result in damage to the

unit and cause electrical shock.

• If the supply cord is damaged, it must be replaced

by the manufacturer or its service agent or

a similarly qualied person in order to avoid

a hazard. Use only the manufacturer specied

power cord for replacement.

• This appliance must be earthed. This appliance

is equipped with a cord having an earth wire.

The plug must be plugged into an outlet that is

properly installed and earthed. Do not under any

circumstances cut or remove the square earthed

pin (only for UK) from this plug.

CAUTION!

Warning for power supply cord

• Always use a anti-explosive circuit breaker or

fuse with the proper amp rating. Do not, under

any circumstances, use wire, pins or other objects

in place of a proper fuse.

• In the event of any abnormality with the air conditioner

(eg. a burning smell), do not pull out the plug directly,

open the window for ventilation rstly, then turn the

unit o and disconnect the power supply.

Plug

Grounding tab

6 www.electrolux.com

1.3

Usage cautions

• Be sure to turn the unit o and disconnect the power

supply cord before performing any maintenance or

cleaning.

• Do not put unit near any heat source or open re when

you replacing the lters.

• Do not splash or pour water directly onto the unit. Water

can cause electrical shock or equipment damage.

• Drainage should be performed whenever moving the

air conditioner. If any water remains in the tank, it may

spill out while being moved.

• To ensure proper drainage, the drainage hose must

have no kinks and must not be elevated during

dehumidication mode. If not, the drained water may

spill out into the room.

• The temperature around the drainage hose must not

be below freezing point when used. Drained water may

freeze inside the hose, causing water inside the unit to

overow into the room.

• Do not block the exhaust air outlet with obstacles. Cooling

performance may be reduced or stop completely.

• Provide a anti-explosive residual current device (RCD)

in order to protect against electric shock in accordance

with British Standard and Wiring Rules.

• Exposure to direct airow for an extended period of

time could be hazardous to your health. Do not expose

occupants, pets, or plants to direct airow for extended

periods of time.

• Do not use this air conditioner for non-specied special

purposes (e.g. preserving precision devices, food, pets,

plants, and art objects). Usage in such a manner could

harm such property.

• Do not use means to accelerate the defrosting process

or to clean, other than those recommended by the

manufacturer.

(only for UK)

Plug

Square earthed pin

7ENGLISH

• The appliance shall be stored in a room without

continuously operating ignition sources (for example:

open ames, an operating gas appliance or an

operating electric heater).

• Do not pierce or burn.

• Compliance with national gas regulations shall

be observed.

• Keep ventilation openings clear of obstruction.

• The appliance shall be stored in a well-ventilated area

where the room size larger than 12 m

2

.

WARNING!

• Thoroughly read all of the warnings.

• When defrosting and cleaning the appliance, do

not use any tools other than those recommended

by the manufacturing company.

• The appliance must be placed in an area without

any continuous sources of ignition (for example:

open ames, gas or electrical appliances in

operation).

• Do not puncture and do not burn.

• Refrigerant gases can be odourless.

• The appliance must be installed, used and stored

in an area that is greater than 12 m

2

.

• This appliance contains a certain number of

grams (see rating label back of unit) of R290

refrigerant gas.

• R290 is a refrigerant gas that complies with the

European directives on the environment. Do not

puncture any part of the refrigerant circuit.

• If the appliance is installed, operated or stored in

a nonventilated area, the room must be designed

to prevent the accumulation of refrigerant leaks

resulting in a risk of re or explosion due to ignition

PLEASE NOTE: CHECK THE PLATE FOR THE TYPE

OF REFRIGERANT GAS USED IN YOUR APPLIANCE.

Specic information regarding appliances with R290

refrigerant gas.

8 www.electrolux.com

of the refrigerant caused by electric heaters,

stoves, or other sources of ignition.

• The appliance must be stored in such a way

as to prevent mechanical failure.

• Individuals who operate or work on the refrigerant

circuit must have the appropriate certication

issued by an accredited organisation that ensures

competence in handling refrigerants according

to a specic evaluation recognized by associations

in the industry.

• Repairs must be performed based on the

recommendations from the manufacturing

company. Maintenance and repairs that require

the assistance of other qualied personnel

must be performed under the supervision of

an individual specied in the use of ammable

refrigerants.

Transport of equipment containing ammable

refrigerants

See transport regulations.

Marking of equipment using signs

See local regulations.

Disposal of equipment using ammable refrigerants

See national regulations.

Storage of equipment/appliances

The storage of equipment should be in accordance with

the manufacturer’s instructions.

Storage of packed (unsold) equipment

Storage package protection should be constructed such

that mechanical damage to the equipment inside the

package will not cause a leak of the refrigerant charge.

The maximum number of pieces of equipment permitted

to be stored together will be determined by local

regulations.

1.4

Additional information

9ENGLISH

2.2

Warning during usage

To prevent injury to the user or other

people and property damage, the

following instructions must be followed.

Incorrect operation due to ignoring

instructions may cause harm or damage.

The seriousness is classied by the

following indications:

This symbol indicates the possibility

of death or serious injury.

Warning during usage

This symbol indicates the possibility

of injury or damage to property.

WARNING!

CAUTION!

Meanings of symbols used in this manual

are shown below:

This symbol indicates never

to do this.

This symbol indicates always

do this.

2.

SAFETY INSTRUCTION

2.1

Notes on Operation

• Allow 4 minutes for the compressor

to restart cooling. If you turn the air

conditioner o and immediately restart

it, allow 4 minutes for the compressor

to restart cooling. There is an electronic

device in the unit that keeps the

compressor turned o for 4 minutes

for safety.

• In the event of a power failure during

use, allow 4 minutes before restarting

the unit. After power is reinstated, restart

the air conditioner. If the power was o

for less than four minutes, be sure to wait

at least four minutes before restarting

the unit. if you restart the air conditioner

within four minutes, a protective device

in the unit may cause the compressor

to shut o. This protective device will

prevent cooling for about 5 minutes. Any

previous setting will be cancelled and

the unit will return to its initial setting.

• When you turn the unit o in cooling

mode, the compressor will shut o

immediately and the upper/under fan

motor will stop running after 5 seconds;

if operate the unit to fan mode from

cooling mode, the compressor will shut

o immediately and the under fan motor

will stop running after 5 seconds; and if

operate the unit to heating mode from

cooling mode, the compressor will shut

o immediately and the under fan motor

will stop running after 30 seconds.

• Low temperature operation: Is your

unit freezing up? Freezing may occur

when the unit is set close to 18°C in

low ambient temperature conditions,

especially at night. In these conditions,

a further temperature drop may cause the

unit to freeze. Setting the unit to a higher

temperature will prevent it from freezing.

• Dehumidication mode increases room

temperature. The unit generates heat

during dehumidication mode and the

room temperature will rise. Warm air

will be blown out from the exhaust air

outlet, but this is normal and does not

indicate a problem with the unit.

• This air conditioner blows the warm air

generated by the unit outside the room

via the exhaust hose while in cool mode.

In the mean time, the same amount

of air will enter the room from outside

through any openings of the room.

• Any person who is involved with working

on or breaking into a refrigerant circuit

should hold a current valid certicate

from an industry-accredited assessment

authority, which authorises their

competence to handle refrigerants

safely in accordance with an industry

recognised assessment specication.

• Servicing shall only be performed

as recommended by the equipment

manufacturer. Maintenance and repair

requiring the assistance of other skilled

personnel shall be carried out under the

supervision of the person competent in

the use of ammable refrigerants.

• The working temperature range of the

air conditioner is 16-35°C (60-95°F)

under cooling mode; 5-27°C (41-80°F)

under heating mode.

10 www.electrolux.com

Warning Meaning

Plug in power plug properly Otherwise, it may cause electric shock,

re and explosion due to excess heat

generation

Do not operate or stop the unit by

inserting or pulling out Die power plug

It may cause electric shock, re and

explosion due to heat generation

Do not damage or use an unspecied

power cord

It may cause electric shock, re and

explosion. If the power cord is damaged,

it must be replaced by the manufacturer

or an authorised service centre or

a similarly qualied person in order

to avoid a hazard

Do not modify power cord length or

share the outlet with other appliances

It may cause electric shock, re and

explosion due to heat generation

Do not operate with wet hands or in

damp environment

It may cause electric shock

Do not direct airow at room occupants This could harm your health

Always ensure eective earthing Incorrect earthing may cause electric

shock

Do not allow water to run into electric

parts

It may cause failure of unit or electric

shock

Always install circuit breaker and

a dedicated power circuit

Incorrect installation may cause electric

shock, re and explosion

Unplug the unit if strange sounds, smell,

or smoke comes from it

It may cause electric shock, re and

explosion

Do not use the socket if it is loose

or damaged

It may cause electric shock, re and

explosion

Do not open the unit during operation It may cause electric shock, re and

explosion

Keep rearms away It may cause re and explosion

Do not use the power cord close

to heating appliances

It may cause electric shock, re and

explosion

Do not use the power cord near

ammable gas or combustibles, such

as gasoline, benzene, thinner, etc.

It may cause electric shock, re and

explosion

Ventilate room before operating air

conditioner if there is a gas leakage

from another appliance

It may cause explosion, re, explosion

and burns

Do not disassemble or modify unit It may cause failure and electric shock

11ENGLISH

CAUTION!

Caution Meaning

When the air lter is to be removed,

do not touch the metal parts of the unit

It may cause an injury

Do not clean the air conditioner with

water

Water may enter the unit and degrade the

insulation. It may cause an electric shock

Ventilate the room well when used

together with a stove, etc.

An oxygen shortage may occur

When the unit is to be cleaned, switch

o, and turn o the circuit breaker

Do not clean unit when power is on as

it may cause re, explosion and electric

shock, it may cause an injury

Do not place a pet or house plant where

it will be exposed to direct air ow

This could injure the pet or plant

Do not use for special purposes Do not use this air conditioner to

preserve precision devices, food, pets,

plants, and art objects. It may cause

deterioration of quality, etc.

Stop operation and close the window

in storm or cyclone

Operation with windows opened may

cause wetting of indoor and soaking

of household furniture

Hold the plug by the head of the power

plug when taking it out

It may cause electric shock and damage

Turn o the main power switch when not

using the unit for a long time

It may cause failure of product or re and

explosion

Do not place obstacles around air-inlets

or inside of air-outlet

It may cause failure of appliance

or accident

Always insert the lters securely.

Clean lter once every two weeks

Operation without lters may cause

failure

Do not use strong detergent such

as wax or thinner - use a soft cloth

Appearance may be deteriorated due

to change of product colour or scratching

of its surface

Do not place heavy object on the power

cord and ensure that the cord is not

compressed

There is danger of re, explosion

or electric shock

Do not drink water drained from

air conditioner

It contains contaminants and could make

you sick

Use caution when unpacking and installing Sharp edges could cause injury

If water enters the unit, turn the unit o at

the power outlet and switch o the circuit

breaker. Isolate supply by taking the

power-plug out and contact a qualied

service technician

It could cause electric shock and damage

12 www.electrolux.com













 









3.

UNIT DESCRIPTION

• Check all the accessories are included in the package and please refer to the installation

instructions for their usage.

1

2

5

6

3

10

11

12

13

9

4

7

8

Remote control

Signal receiver

Carrying handle (both sides)

Air intake

Room air outlet

Air exhaust

Power plug socket

Castor

Control panel

Power cord

Continuous drain outlet

Bottom drain outlet

Pump drain outlet

4.

ACCESSORIES INCLUDED

1

2

3

4

PARTS PARTS NAME: QUANTITY:

Adaptor A, Exhaust duct,

Adaptor B (at mouth),

Drain hose

Remote control

1 set

1 pc

1 set

Battery (R03P “AAA” 1.5V) 2 pcs

13ENGLISH

5.

INSTALLATION INSTRUCTIONS

5.1

Exhausting hot air

In the Cool Mode the appliance must be

placed close to a window or opening so

that the warm exhaust air can be ducted

outside. First position unit on a at oor

and make sure there’s a minimum of

50cm clearance around the unit, and is

within the vicinity of a single circuit outlet

power source.

1.

Extend either side of the hose (Fig. 1)

and screw the hose to adaptor A (Fig. 2).

3.

Install the adaptor A into the unit (Fig. 4).

Fig. 4

2.

Extend the other side of the hose and

screw it to adaptor B (Fig. 3).

)LJ

)LJ

)LJ

/RFN



6OLGHRQWR



The hose can be extended from

its original length of 38cm up to

150cm, but it is the best to keep

the length to minimum required.

Also make sure that the hose does

not have any sharp bends or sags.

(Fig. 6)

The adaptor A already be screwed

to the hose for this unit.

)LJ

4.

Ax the adaptor B into the window.

(Fig. 5)

14 www.electrolux.com

7.

OPERATING INSTRUCTIONS

Some of the following instructions

can only be used by using the

Control Panel.

It is not necessary to use the

drainage hose in the “cool” mode.

Cooling mode

Heating mode (on some models)

In this mode the exhaust adaptor hose

MUST be used.

In this mode the exhaust adaptor hose

MUST be used.

7.1

Usage of the Control Panel

1.

Press the “mode” button until the Cool

mode indicator is lit.

2.

Press the “fan speed” button to

choose the fan speed according

to the illumination of the fan speed

indicator. You can choose the

fan speed as following sequence:

“auto” → “hi” → “med” → “low” → “auto”.

3.

Press the “

” or “ ” button to choose

the temperature you want.

1.

Press the “mode” button until the “Heat”

indicator is lit.

2.

Press the “fan speed” button to

choose the fan speed according

to the illumination of the fan speed

indicator. You can choose the

fan speed as following sequence:

“auto” → “hi” → “med” → “low” → “auto”.

3.

Press the “

” or “ ” button to choose

the temperature you want.

4.

Connected drain hose. See 7.4

Drainage section.

6.

AIR CONDITIONER FEATURES

6.1

CONTROL PANEL



  

1

2

7

3

4

5

6

8

9

Displays temperature/time

Power ON/OFF

Sleep

Filter Reset

Fan Speed

Adjust Temperature or Timer

Mode Selection

Timer

Swing

Dry mode

Press the “mode” button until the Dry

mode indicator is lit. The screen displays

the room temperature.

At the same time, the “low” fan indicator

lights.

Note:

In this mode, fan speed cannot

be selected.

15ENGLISH

Fan mode

In this mode, there is no need to use the

exhaust hose or drainage hose.

1.

Press the “mode” button until

the Fan mode indicator is lit.

2.

Press the “Fan speed” button

to choose the desired fan speed.

3.

The fan will run at the selected speed

and the display will show the room

temperature.

Auto mode

Timer mode

How to delay startup

Always have the exhaust hose attached

in this mode.

When you set the air conditioner in Auto

mode, it will automatically select cooling,

heating (inapplicable for cooling only

models), or fan only operation depending

on what temperature you have selected and

the room temperature. The air conditioner

will control room temperature automatically

round the temperature point set by you.

Under AUTO mode, you can not select

the fan speed.

1. Press the “mode” button until the

“Auto mode” indicator lights.

After the “Auto mode” is selected the unit

will run automatically according to the

actual room air temperature.

The timer facilitates the user to delay the

unit startup or shutdown.

Plug in the unit, so the unit turns to standby.

Press the “timer” button, then the Timer

indicator will switch on and the number

of hours on the screen will show “0.0”.

Tap or hold the UP arrow “

” or the DOWN

arrow “

” to change delay start timer at

0.5 hour increments up to 10 hours, then

at 1 hour increments up to 24 hours. Press

the “timer” button again within 5 seconds,

you will quit the timer setting directly.

After 5 seconds, the timer function

is enabled, the display will show the

temperature back. The control will count

down the time remaining until startup.

The unit will start up in the mode

as previously set.

To cancel the setting, press the “timer”

button again will show the remain time and

press the button again to quit the function.

You can also cancel the setting by pressing

How to delay shutdown

You can delay shutdown when the unit

is on.

Press the “timer” button, then the Timer

indicator will switch on and the number

of hours on the screen will show “0.0”.

Tap or hold the UP arrow “

” or the

DOWN arrow “

” to change delay

stop timer at 0.5 hour increments up

to 10 hours, then at 1 hour increments

up to 24 hours. Press the “timer” button

again within 5 seconds, you will quit

the timer setting directly.

After 5 seconds, the timer function

is enabled, the display will show the

temperature back. The control will count

down the time remaining until shuts down.

To cancel the setting, press the “timer”

button again will show the remaing time and

press the button again to quit the function.

You can also cancel the setting by pressing

the “on/o” button. After cancel the setting,

the timer indicator will switch o.

Filter reset

Sleep mode

Active this feature will give you a

comfortable temperature and help

save energy.

Only when the unit is in Cool, Heat or auto

mode, you can press the “sleep” button to

make the unit run in Sleep mode.

Note: Please refer to page 17 for the

details about “Sleep” mode.

This feature is a reminder to clean the Air

Filter (See Care and Cleaning) for more

ecient operation.

The lter indicator will illuminate after

250 hours of operation. To reset after

cleaning the lter, press the “lter reset”

button, then the “lter” indicator will go o.

°F/°C function

Press the “

” and “ ” button the same

time for more than 3 seconds to switch

between degree Fahrenheit and degrees

Celsius. Under Dry/Fan mode, you can

not select °F/°C.

Press the “swing” button to enable louver

swing function, the louver on the top

panel will swing up and down.

Press this button again to disable the

louver swing function.

Louver Swing Function

Note:

In this mode, auto speed cannot

be selected.

the “on/o” button. After cancel the setting,

the timer indicator will switch o.

16 www.electrolux.com

















8VHU

0D[P

5HPRWHFRQWURO

3RUWDEOH$&

TURNING THE UNIT ON

Remove the cover at the back of the

remote control.

Insert the provided batteries correctly

(see the instructions inside the battery

compartment).

Close up the cover.

To replace the old batteries (which have

been used up) with two new R03P “AAA”

1.5V batteries, repeat the steps above.

Battery Installation and Important

Instructions

How to Use the Remote Control

7.2

Remote Control

1

2

5

3

7

4

8

6

Remote Control screen

Temp/Timer setting button

On/O button

Mode button

Sleep button

Timer button

Swing button

Speed button

If the remote control unit is replaced or

discarded, the batteries must be removed

and disposed of in accordance with

local legislation as they do harm to the

environment.

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-

zinc) or rechargeable (nickel-cadmium)

batteries.

Do not dispose of batteries in re. Batteries

may explode or leak. If the remote control

is not used for a long time, remove the

batteries from the remote control.

The remote control must be handled with

extreme care. Do not drop it or expose it

to direct sunlight or sources of heat.

This device complies with Part 15 of the

FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful

interference, and (2) this device must

accept any interference received,

including interference that may cause

undesired operation.

Point the remote control at the location

of the signal receiver. The remote control

must be no more than 16 ft (5 meters)

away from the unit (without obstacles

between the remote control and the unit).

17ENGLISH

Plug in the unit, then press the “on/o”

button (when turned on, the unit will operate

as the last setting before shutdown.

To switch the unit o, press “on/o”

button again, then remove the plug.

Always switch the unit o by pressing the

“on/o” button and wait for few minutes

before removing the plug.

Press the “mode” button until the left side

of LCD screen displays “cool”.

Press the “fan speed” button to choose the

fan speed “auto”, “high”, “mid”, and “low”.

Press the “

” and “ ” button to choose

the temperature you want.

Press the “mode” button until the left side

of LCD screen displays “dry”.

At the same time, the “low” fan symbol

appears on the screen.

Note: In this mode, fan speed cannot

be selected.

Press the “mode” button until the left side

of LCD screen displays “heat”.

Press the “fan speed” button to choose the

fan speed “auto”, “high”, “mid”, and “low”.

Press the “

” and “ ” button to choose

the temperature you want.

Press the “mode” button until the upper

side of LCD screen displays “auto”.

Under AUTO mode, you can not select

the fan speed.

Press the “

” and “ ” button to choose

the temperature you want.

When the unit is in Cool, Heat or auto

mode, you can press the “sleep” button

to make the unit run in Sleep mode. In this

mode, the fan speed will be set as “auto”

automatically, which cannot be changed.

In Cool/Heat mode the selected

temperature will increase/decrease

by 1°C 30 minutes after the mode is

selected. The temperature will then

increase/decrease by another 1°C after

an additional 30 minutes. This new

temperature will be maintained for 7 hours

before it returns to the originally selected

temperature. This ends the “Sleep” mode

and the unit will shut down automatically.

Press the “mode” button until the left side

of LCD screen displays “fan”.

In this mode, you can select fan speed

“high”, “mid” or “low” by pressing the Fan

speed button and referring to the diagram.

Note: In this mode, the air exhaust hose

does not need to be connected.

Cool mode

Dry mode

Heat mode (For Heat & Cool models only)

AUTO mode

Sleep mode

Fan mode

18 www.electrolux.com

The “Sleep” mode program can be

cancelled at any time during operation by

pressing the “Sleep”, “mode” or “fan speed”

button.

Note: In Fan or Dry mode, Sleep mode

cannot be set.

Press the “swing” button to enable louver

swing function, and the upper side of

screen will display “

”. The louver

on the top panel will swing up and down.

Press this button again to disable the

louver swing function.

Louver Swing Function

°F/°C function

Timer mode

Press the “

” and “ ” button the same

time for more than 3 seconds to switch

between degree Fahrenheit and degrees

Celsius. Under Dry/Fan mode, you can

not select °F/°C.

How to delay startup

Plug in the unit, so the unit turns to

standby. Press the “timer” button, the

screen will display “timer”and “h”, and

the “on” will ashing.

Tap or hold the UP arrow “

” or the

DOWN arrow “

” to change delay start

timer at 0.5 hour increments up to

10 hours, then at 1 hour increments up to

24 hours. After 3 seconds, the setting will

be memorized. The control will count down

the time remaining until startup. You can

also press the “timer” button again directly

and the “on” will stop ashing immediately,

then the unit will start up in the mode as

previously set.

You can set up the mode and the unit will

start up as you preferred after “on” stop

ashing.

To cancel the setting, press the “timer”

button again.

19ENGLISH

NOTE:

• Unscrew the drain cap of continuous

drain outlet(Fig.20).

• Connect one end of the garden hose

(sold separately) or drain hose to the

drain outlet then lead the other end into

a drain that is lower than the unit(Fig.21).

• Condensate may ow out after removing

the drain cap, if the unit is running in

Cool or Auto mode. When you want

to remove the garden hose, prepare

a drip tray (not supplied) to collect the

condensate from the drain outlet.

• Please be sure that the height of the

drain and section of the drain hose

should not be higher than that of the

drain outlet, or the continous drainage

may not work properly.

• During Cool or Auto mode, it is

recommended to disable continuous

drainage by replacing the drain cap to

the drain outlet, to reach the maximum

performance.

How to delay shutdown

You can delay shutdown when the unit is

on. Press the “timer” button, the screen

will display “timer” and “h”, and the “o”

will ashing.

Tap or hold the UP arrow “

” or the DOWN

arrow “

” to change delay stop timer at

0.5 hour increments up to 10 hours, then

at 1 hour increments up to 24 hours. After

3 seconds, the setting will be memorized,

and the display will show the time

remaining until the unit shuts down. You

can also press the “timer” button again

directly and the “o” will stop ashing

immediately.

To cancel the setting, press the “timer”

button again.

If the display reads “AS”, “CS” and

“ES”, the temperature sensor has failed.

Contact your Authorized Electrolux

Service Center.

If the display reads “L3”, the condenser

DC fan motor has failed. Contact your

Authorized Electrolux Service Center.

If the display reads “E4”, the communication

between display PCB and main control

PCB is faulty. Contact your Authorized

Electrolux Service Center.

If the display reads “P1”, bottom tray is

full. Carefully move the unit to a drain

location, remove the bottom drain plug

and let the water drain away. Restart the

machine until the “P1” symbol disappears.

If error repeats, call for service.

7.3

Fault code

Continuous Drainage

During the DRY mode or heat pump

model, you will need a garden hose

(sold separately) or drain hose to drain

the condensate from the unit.

Follow the steps below:

7.4

Drainage instruction

Fig. 20

Drain cap

for Dry mode

Drain cap

for Heat Pump mode

Garden hose

Drain hose

Fig. 21

20 www.electrolux.com

NOTE: To ensure all condensate residue

has been removed, tilt the unit by lifting

it slightly upwards from the front until no

more condensate comes out from the

drain outlet.

Emptying the condensate residue inside

the unit during winter storage.

Put a drip tray (not supplied) under

bottom drain outlet, then pull out the

drain cap to allow the condensate

to ow into the drip tray.

)LJ

)LJ

Bottom

Drain Outlet

Drip cap

Drip tray

1

2

Replace the drain cap to the continuous

drain outlet when no condensate ows out.

Put the drip tray under the bottom drain

outlet, then remove the rubber stopper from

the drain outlet, to allow the condensate to

ow into the drip tray. If your drip tray can’t

hold all the condensate, a number of lls

will be needed.

Replace the drain cap to the bottom drain

outlet when no condensate ows out.

8.

CARE & CLEANING

Clean your air conditioner occasionally

to keep it looking new. Be sure to unplug

the unit before cleaning to prevent shock

or re hazards.

The cabinet and front may be dusted with

an oil-free cloth or washed with a cloth

dampened in a solution of warm water

and mild liquid dishwashing detergent.

Never use harsh cleaners, wax or polish

on the cabinet front.

Be sure to wring excess water from the

cloth before wiping around the controls.

Excess water in or around the controls

may cause damage to the air conditioner.

8.1

Cleaning the unit

1.

Removed the air lter as shown the

below gure.

To keep your air conditioner working

eciently, you should clean the lters

every two weeks of operation.

Take out the upper air lter and the

lower air lter.

8.2

Cleaning the lters

La page charge ...

Electrolux EXP34U338CW Le manuel du propriétaire

Electrolux EXP34U338CW Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents