5019 100 75063
DS 2355
1.
Control panel.
2.
Grease filter (inside the extractor grille).
3.
Lighting unit.
4.
Pull-out steam deflector.
REMOVING AND RENEWING OR
CLEANING THE GREASE FILTER
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the extractor grille (
a
,
b
,
c
).
3.
Remove the device fixing the grease filter (
d
).
4.
Remove the dirty grease filter.
5.
After cleaning the grease filter remount in
reverse order, making sure the entire
extraction surface is covered.
REPLACING BULBS
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the extractor grille (
a
,
b
,
c
).
3.
Remove the burnt-out bulb.
Use 40W max E14 bulbs only.
4.
Remount the extractor grille.
FITTING OR RENEWING THE CARBON
FILTER
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the extractor grille (
a
,
b
,
c
).
3. Removing:
turn anticlockwise.
Fitting:
insert the carbon filter over the motor
protection grille and turn clockwise.
4.
Remount the extractor grille.
CONTROL PANEL
A.
Speed selector
B.
Light switch
C.
Micro-switch lever
With light and speed selected, opening the
steam deflector the lever
C
appears and the
hood switches on, closing the steam deflector,
the lever
C
disappears and the hood switches off.
2
3
1
4
F
A
0123 0I
medium amount of
steam and fumes
large amount of steam
and fumes
sma
amount o
steam
and fumes
ACB
a
c
a
b
d
d
PRODUCT DESCRIPTION SHEET
F NL E PGBD GRI