DOODLe labs ACM-DB-3-R2 Manuel utilisateur

Marque: DOODLe labs

Modèle: ACM-DB-3-R2

Catégorie: Points d'accès WLAN

Taper: Manuel utilisateur

July 16, 2020

User Manual

Doodle Labs ACM-DB-3-R2 Industrial Wi-Fi

Transceiver

Dual Band – 5.x and 2.4 GHz, 3x3 MIMO, IEEE802.11ac transceiver

Product Family Overview

Doodle Labs’ portfolio of Industrial Wi-Fi transceivers offer the industry’s best-in-class performance. These transceivers

have high transmit power for long-range communication and has been designed to withstand operation in extremely

challenging environments. In addition, these transceivers feature high interference immunity that allows successful

operation in today’s congested Wi-Fi environments. The transceivers are FCC, CE, and IC certified and have been

deployed in numerous demanding applications.

Figure 1. Top and bottom views of the ACM-DB-3-R2 transceiver with MMCX connectors.

Target Applications

The Doodle Labs Industrial Wi-Fi transceivers meet the demanding needs of customers across a broad range of

industries. Examples include:

•Unmanned Vehicles – Drones

•Unmanned Robots

•Industrial IoT applications

•Rugged/Military requirements with extended temperature and vibration resiliency

•Mesh Networking deployments

•Passenger Wi-Fi access aboard airplanes and trains

•Streaming HD Video Surveillance Cameras

•Wireless Infrastructure in harsh operating conditions of the Oil/Gas fields and Mines

July 16, 2020

Datasheet

Features

Best-in-class features include:

•Modular FCC, CE and IC certifications to expedite system integration

•Integrated LNA for best-in-class Rx sensitivity to pick up low energy signals from mobile phones

•Up to 30 dBm of RF power to get the largest possible area coverage

•Extended temperature range from -40C to +85C.

•Electrical Stress protection on Antenna ports for outdoor operation

•Long product life cycle to meet the needs of Industrial IoT applications

•High interference immunity for Wi-Fi congested environment

•Hardware “RF Kill” feature to meet the FAA requirement for airborne applications

•High band isolation to support concurrent dual band operation for multi-band routers

Figure 2. Interference immunity performance compared to leading competitors.

July 16, 2020

Datasheet

ACM-DB-3 Specifications

Table 1. Technical Specifications.

Ordering Code

ACM-DB-3-R2 with MMCX connectors

ACM-DB-3-R2 with U.FL connectors

Radio Configuration

3x3 MIMO, Dual Band

Special Features

–Extended lifespan with planned availability for long time

–Extreme Reliability, IPC Class 2 standard with Class 3 options

–Compliant to MIL-STD-202G, Qualified for high shock/vibration environments

Design-In Documentation

https://www.doodlelabs.com/technologies/technical-library/

MAC Chipset

Qualcomm Atheros: QCA9890-BR4B with Extended Temperature range

Software Support

Open Source Linux Drivers

ath10k for 11ac models

OpenWRT (Wireless Router/Linux OS)

Center Frequency Range

5.180 GHz ~ 5.825 GHz

2.412 GHz ~ 2.484 GHz

This varies by the regulatory domain

Channel Bandwidth*

20, 40 and 80 MHz channels

Radio Modulation/Data

Rates (Dynamic Link

Adaptation)

802.11ac: MCS0-9 (5.x GHz)

802.11a: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps (5.x GHz)

802.11n: MCS0-23 (5.x and 2.4 GHz)

802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps (2.4 GHz)

802.11ac Wave 1

Capabilities

•802.11 dynamic frequency selection (DFS) as an AP and Client

•Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx), Maximal ratio

combining (MRC), Cyclic shift diversity (CSD), Frame aggregation, block ACK,

802.11e compatible bursting, Spatial multiplexing, cyclic-delay diversity

(CDD), low-density parity check (LDPC), Space Time Block Code (STBC)

•Phy data rates up to 1.3 Gbps (80 MHz channel)

July 16, 2020

Datasheet

802.11n version 2.0

Capabilities

•802.11 dynamic frequency selection (DFS) as an AP and Client

•Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx), Maximal ratio

combining (MRC), Cyclic shift diversity (CSD), Frame aggregation, block ACK,

802.11e compatible bursting, Spatial multiplexing, cyclic-delay diversity

(CDD), low-density parity check (LDPC), Space Time Block Code (STBC)

•Phy data rates up to 450 Mbps (40 MHz channel)

Operating Modes

AP, Client, and Adhoc modes for Access Point, PtP, PtmP, and Mesh networks

MAC Protocol

TDD with Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)

Wireless Error Correction

FEC, ARQ

Wireless Data Security

128 bit AES, WEP, TKIP and WAPI hardware encryption. Support for IEEE

802.11d, e, h, i, k, r, v, w and time stamp standards

FIPS Certification

•Small packet size (96 bytes) in AES encryption at full packet rate.

•FIPS 140-2, Level 2 (Temper Evidence Shield), Loop back mode to facilitate

FIPS AES certification.

July 16, 2020

Datasheet

Table 2. Tx and Rx performance at 5 GHz.

Tx/Rx Specification

Radio

Modulation

Coding

Rate

Tx Power

(±2dBm)2

Rx Sensitivity

(Typ)

5 GHz (20 MHz Channel) – 11ac models

802.11a, STBC

BPSK

1/2

-96

802.11a

64 QAM

3/4

-81

802.11ac, 802.11n

BPSK

1/2

-96

802.11ac, 802.11n

16 QAM

3/4

-84

802.11ac, 802.11n

64 QAM

5/6

-75

802.11ac

256 QAM

3/4

-72

5 GHz (40 MHz Channel) – 11ac models

802.11ac, 802.11n

BPSK

1/2

-93

802.11ac, 802.11n

16 QAM

3/4

-81

802.11ac, 802.11n

64 QAM

5/6

-75

802.11ac

256 QAM

5/6

-68

5 GHz (80 MHz Channel) – 11ac models

802.11ac

BPSK

1/2

-87

802.11ac

16 QAM

3/4

-78

802.11ac

64 QAM

5/6

-72

July 16, 2020

Datasheet

802.11ac

256 QAM

5/6

-65

Table 3. Tx and Rx performance at 2.4 GHz.

Tx/Rx Specification

Radio

Modulation

Coding

Rate

Tx Power

(±2dBm)2

Rx Sensitivity

(Typ)

2.4 GHz (20 MHz Channel) – 11ac models

802.11b

Single Stream, STBC

1 Mbps

CCK

-100

802.11g

64 QAM

3/4

-80

802.11n

BPSK

1/2

-95

802.11n

16 QAM

3/4

-83

802.11n

64 QAM

5/6

-76

2.4 GHz (40 MHz Channel) – 11ac models

802.11n

BPSK

1/2

-91

802.11n

16 QAM

3/4

-80

802.11n

64 QAM

5/6

-73

Note 1: It is advantageous to use the smallest channel bandwidth that can support the throughput requirements. Smaller bandwidths provide more

channels to choose and help avoid interference issues.

Note 2: Total Tx power for all streams. Max allowed Tx power depends on the regulatory domain. De-rating of -1 dBm for U.FL connector.

July 16, 2020

Datasheet

Table 4. Additional RF performance information.

Antenna Signal Strength

-35 to -85 dBm (Recommended), Absolute Maximum=+12 dBm

Interference Immunity

SAW filters on RF ports for immunity against high power cellular

transmissions in the neighboring 2.4 GHz bands.

Antenna port isolation for concurrent

operation

Up to +10 dBm signal strength for 5 GHz signal without degrading

2.4 GHz operation

Up to +5 dBm signal strength for 2.4 GHz signal without

degrading 5.x GHz operation

Integrated Antenna Port Protection

10 kV

Receiver LNA Gain

>10 dB

Receiver Adjacent Channel Rejection

(ACR)

>18 dB @ 11a, 6 Mbps (Typ)

Receiver Alternate Channel Rejection

(ALCR)

>35 dB @ 11a, 6 Mbps (Typ)

Receive chain Noise Figure

+6 dB

Transmitter Adjacent Channel Leakage

Power Ratio (ACLR)

45 dB (Fc ± ChBW)

Transmitter Spurious Emission

Suppression

-40 dBc

RF Power control

In 0.5 dBm steps. Accuracy of power calibration loop ±2 dBm.

Each transceiver individually calibrated and tested.

RF Hardware Disable (RF Kill)

Pin 20 of miniPCI-E interface. (Required for FAA compliance)

July 16, 2020

Datasheet

Table 5. Physical, Environment, and Other Specifications.

Host Interface

miniPCI-Express 1.2 Standard

Host CPU Board

Any CPU board with miniPCIe interface

Operating Voltage

3.3 Volts from miniPCI-Express connector

Power Consumption

5.3W @ Max power, in continuous data transfer mode on all chains

2.5W @ 20 dBm power (ETSI max), in continuous data transfer mode on all chains

0.9W in continuous data receive mode

250 mW in Sleep mode

Temperature range

-40°C to +85°C (shield case)

Humidity (Operating)

0% – 95% (Non-condensing)

Dimensions

30 x 50 x 4.75 mm, 12 grams. High Res Photos – Mechanical drawings and 3D-CAD

files available upon request

MTBF

27 years

Regulatory

Requirements

Designed and Verified to meet various regulatory requirements. Formal testing and

approval is required based on the Integrator’s particular host platform and antenna

type. The Integrator is also responsible for obtaining all required regulatory

approvals in target markets for the finished product.

FCC ID

2AG87ACM-DB-3-R2

CE/ETSI

Conforms with all the requirements of the European Directive 1999/5/EC – EN 301

893 V1.8.1, EN 300 328 V.1.8.1, EN 301 489-1 V1.9.2, EN 301 489-17 V2.2.1, EN

60950-1:2006 + A11:2009 + A1:2010 + A12:2011+ A2:2013

Industry Canada (IC)

21411-ACMDB3R2

RoHS/WEEE Compliance

Yes. 100% Recyclable/Biodegradable packaging

July 16, 2020

Datasheet

System Integration

Figure 3. System Integration Block Diagram.

As shown in the block diagram, the modular nature of the MIMO radio transceivers allow for accelerated

development of the wireless modem. Any embedded Single Board Computer with standard miniPCI-Express interface

is required. The Linux distribution OpenWRT has evolved over time and provides advanced features in a wireless

router. It is a stable distribution and many OEMs are using OpenWRT as a starting point and customize further for

their application. The distribution includes the ath10k driver to interface with the MIMO transceivers. Both

OpenWRT and open source drivers (ath9k and ath10k) have extensive online documentation available. User group

forums also provide responsive technical support.

Portfolio Index

Doodle Labs’ Industrial Wi-Fi transceiver portfolio provides configurations optimized for a vast variety of project

needs. All models are form-factor compatible. For information on other models, please visit -

http://www.doodlelabs.com/products/wi-fi-band-radio-transceivers/

Doodle Labs provides extensive design-in documents at:

https://www.doodlelabs.com/technologies/technical-library/

Datasheet

July 16, 2020

FCC Statement

FCC standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 and FCC CFR Title 47 Part 15 Subpart E Section

15.407: 2016

External Antenna with gain ANT0: 3dBi, ANT1: 3dBi, ANT2: 3dBi

FCC Regulatory Compliance:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

If power exceeds the limit and the distance(Over 20cm distance in actual use between the device and user) is compliance

with the requirement

RF Exposure Compliance:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment

should be installed and operated

with a minimum distance of 20cm between the radiator and any part of your body.

Notice to OEM integrator

If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which

the module is installed must also

display a label referring to the enclosed module. The end product shall haves the words “Contains Transmitter Module

FCC ID: 2AG87ACM-DB-3-R2”.

The device must be professionally installed.

The intended use is generally not for the general public. It is generally for industry/commercial use.

The connector is within the transmitter enclosure and can only be accessed by disassembly of the transmitter that is not

normally required. The user has no

access to the connector.

Installation must be controlled. Installation requires special training.

Any company of the host device which installs this modular with unlimited modular approval should perform the test of

radiated & conducted emission and

spurious emission, etc. according to FCC part 15C: 15.247 and15.207, 15B Class B and Part 15 Subpart E Section

15.407 requirement, only if the tests

result comply with FCC part 15C: 15.247 and15.207, 15B Class B and Part 15 Subpart E Section 15.407 requirement,

then the host can be sole legally.

When the module is installed inside another device, the user manual of the hose contain below

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause undesired operation

Datasheet

IC statement

RSS-Gen Issue 5, RSS-247 Issue 2

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and

Economic DevelopmentCanada’s licence-exempt

RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the

device.

The term “IC: “ before the certification/registration number only signifies that the Industry Canada technical

specifications were met.

This product meets the applicable Industry Canada technical specifications.

Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation,

Sciences etDéveloppement économique

Canada. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pasproduire de

brouillage,et (2) l'utilisateur de l'appareil doit

accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le

fonctionnement.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme auxCNR d'Innovation,

Sciences et Développement économique

Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes :

1)L'appareil ne doit pas produire de brouillage;

2)L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en

compromettre lefonctionnement.

Please notice that if the ISED certification number is not visible when the module is installed inside another device,

then theoutside of the device into which

the module is installed o display a label referring to the enclosed module. This exteriorlabel can use wording such

as the following: “Contains IC: 21411-ACMDB3R2” any similar wording that expresses the same meaningmay be

used.

l'appareil hôte doit porter une étiquette donnant le numéro de certification du module d'Industrie Canada, précédé

des mots «Contient un module

d'émission », du mot « IC: 21411-ACMDB3R2 » ou d'une formulation similaireexprimant le même sens, comme

suit

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 andcompliance with

RSS-102 RF exposure, users can obtain

Canadian information on RF exposure andcompliance.

Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 etla

conformité

à l'expositionde RSS-102 rf, utilisateurs peut obtenir l'information canadienne surl'exposition et la conformité de rf.

This transmitter must not be co-located or operating in conjunction with any other antenna ortransmitter. This

equipment should be installed and operated

with a minimum distance of 20centimeters between the radiator and your body.

Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ouémetteur.

Cet équipementdevrait être installé et

actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps.

B1 for indoor use only

B1 pour usage intérieur uniquement

This radio transmitter IC: 21411-ACMDB3R2 has been approved by Innovation, Science and Economic

Development Canada to operate with the antenna types listed below, with the maximum permissible gain

indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any

type listed are strictly prohibited for use with this device.

3)The host device will use antennas:External Antenna with gain ANT0: 3dBi, ANT1: 3dBi, ANT2: 3dB

DOODLe labs ACM-DB-3-R2 Manuel utilisateur

Marque: DOODLe labs

Modèle: ACM-DB-3-R2

Catégorie: Points d'accès WLAN

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: DOODLe labs ACM-DB-3-R2 User manual

Documents connexes

DOODLe labs ACM-DB-2M Mode d'emploi

DOODLe labs ACM-DB-3-R2 Manuel utilisateur

DOODLe labs ACM-DB-3-R2 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents