Baseus 3 in 1 Magnetic Wireless Charger Manuel utilisateur

3 in 1 Magnetic Wireless Charger
Marque
Baseus
Modèle
3 in 1 Magnetic Wireless Charger
Taper
Manuel utilisateur
5. Charging slow.
Charging efficiency depends on the receiving power of your devices, and do not keep those apps
keep running during charging.
6. The phone is charging intermittently, or the indicator light flashes.
If the charging current is not enough, please use a adapter with sufficient power 9V/2A or 12V/2A
above.
7. Charging fever.
It is normal for the receiving coil or transmitter board to generate heat during wireless charging. If
the wireless charger is too hot, please take your phone off it, when the wireless charger is cooled
down, please charge it again.
8. The charger does not work.
Do not put metal debris or magnetic cards on the charging area. If the product does not work due
to overheating. please take off the phone and charge it again when it is cooled down.
10. If there are another problems, please contact our after-sales for solution.
9. For iPhone 13 / 12 series phone can not be charging?
1. If you are using iPhone 13 / 12 series, but you can't charge it, please try restarting your phone
and charging again.
2. If your iPhone cannot be charged, it may be due to the IOS Version. Please try restarting your
phone to solve this problem.
2. If you're failing to charge your device, please try out the following:
(1) Please restart your cell phone and test with other Type-C charging cable.
(2) Please check whether the indicator turns on or not.
(3) Please check the Adapter is QC3.0 Quick Charger (Output:9V/2A) or not, iPhone original
adapter does not match the wireless charger.
(4) Please check your Phone case thickness(<=5mm). Metal ring or Magnetic Pad will not be
available.
3. If you're using the recommended wireless charger with the QC3.0 Adapter and have
removed any potential charging obstructions, but are still experiencing Issues, try this:
(1) Replacing the cable connecting your wireless charger.
(2) Rebooting your phone.
(3) Unplug the adapter and reinsert.
4. If the LED light flashes and the wireless charging stand cannot charge your device,
how can I deal with this problem?
1. Before using this wireless iPhone charger, please make sure that your device supports Qi
wireless charging function.
2. Check whether the 3.0 adapter is used for charging.
3. Check whether there are metal foreign matters in the shell of your equipment. Magnetic and
metal accessories will flash the LED and prevent charging.
WARNING
1. Avoid using the product at places that are wet, humid or have high temperature.
2. Avoid dropping the product from high places.
3. Do not disassemble the product by yourselves. Please contact us if necessary.
4. Do not clean the product unless the unit is powered off.
5. It is recommended to use 18W or above adapter to charge 3 smart devices at the same time.
All products brands and trademarks are property of their respective owners.
TIPS
1. This 3-in-1 wireless charging station only supports Apple watch S7 / SE / S6 / S5 / S4 / S3 /
S2. (Note: Apple watch series 1 is not supported)
2. Do not charge the charging station of Apple products from the computer USB interface or other
power converters.
3. When charging, place the Qi enabled device in the center of each wireless charging area.
4. Make sure your device is in the middle of the cordless charger area.
5. The silicone shell of iWatch and AirPods may cause abnormal charging. It is best to take it off
before charging.
iWatch-
Ladebereich
Ladebereich
des Telefons
LED-
Kontrollleuchte
Ladebereich
für Ohrhörer
PRODUKT-ERSCHEINUNGSBILD
EINFÜHRUNG ZUM PRODUKT.
Das 3 in 1 Wireless Charger ist eine Multifunktions-Ladestation, mit der Sie 3
Smart-Geräte (iPhone12/13 series, iWatch und Ohrhörer) gleichzeitig an unserem
Produkt aufladen können. Es ist kompatibel mit iPhone12/13 series, iWatch, AirPods
und den meisten TWS.
Es ist ein einzigartiges Design mit elegantem Aussehen und perfekt für den Einsatz im
Büro oder zu Hause. Besonders für Apple-Benutzer ist es sehr praktisch, Ihre
Smart-Geräte an unserem Produkt aufzuladen. Es gibt Schutz vor Überladung und
FOD-Funktion, Sie können Ihr Ladeerlebnis genießen.
Kühlöffnung
Kühlöffnung
Typ C-
Ladeanschluss
Etikett
HINWEISE ZU DEN LED-ANZEIGEN
Für Apple
Kabelloses Laden mehrerer Geräte
WIE ZU VERWENDEN
Kompatibel mit iPhones
der Serie12/13
Nur kompatibel mit der
iWatch 7/6/5/4/3/2/SE
Kompatibel mit
AirPods 2/3/Pro
Zone de chargement
pour iWatch
Zone de chargem-
ent pour téléphone
portable
Voyant lumineux
LED
Zone de chargement
des écouteurs
APPARENCE DU PRODUIT
PRÉSENTATION DU PRODUIT
Ventilateur de
refroidissement
Ventilateur de
refroidissement
Port Type-C
Label
INSTRUCTIONS RELATIVES AU VOYANT LUMINEUX
Pour Apple
CHARGE SANS FIL DE PLUSIEURS APPAREILS
COMMENT UTILISER
Compatible avec les
séries 12/13 /iPhone 12/13
Case avec MagSafe
Compatible uniquement
avec l'iWatch 7/6/5/4/3/2/SE
Compatible avec
les AirPods 2/3/Pro
Área de carga
del iWatch
Área de carga
del teléfono
Luz indicadora
LED
Área de carga
del TWS
APARIENCIA DEL PRODUCTO
PRESENTACIÓN DEL PRODUCTO
El Cargador Inalámbrico 3 en 1 es una estación de carga multifunción que puede
cargar 3 dispositivos inteligentes (iPhone12/13 series, iWatch y auriculares) al mismo
tiempo. Es compatible con iPhone12/13 series, iWatch, AirPods y la mayoría de TWS.
Su diseño único y elegante apariencia hace que sea perfecto para usarlo en la oficina
o el hogar. Es muy práctico cargar sus dispositivos inteligentes en nuestro producto,
especialmente para los usuarios de Apple. Cuenta con protección contra sobrecarga y
función FOD, puede disfrutar de la experiencia de carga.
Ventilación de
enfriamiento
Ventilación de
enfriamiento
Puerto Tipo C
Etiqueta
etiqueta
INSTRUCCIONES DE LA LUZ LED
Para Apple
CARGA INALÁMBRICA DE MÚLTIPLES DISPOSITIVOS
CÓMO USAR
Compatible con la
serie 12/13/iPhone
12/13 serie Case con
MagSafe
Solo Compatible con
iWatch 7/6/5/4/3/2/SE
Compatible con
AirPods 2/3/Pro
Area di ricarica
iWatch
Area di ricarica
del telefono
Indicatore
luminoso a LED
Area di ricarica
Earbuds
ASPETTO DEL PRODOTTO
INTRODUZIONE AL PRODOTTO
Il caricabatterie wireless 3 in 1 è una stazione di ricarica multifunzione, puoi caricare 3
dispositivi smart (Serie iPhone12/13, iWatch e auricolari) sul nostro prodotto
contemporaneamente. È compatibile con gli Serie iPhone12/13, iWatch, AirPods, e la
maggior parte di TWS.
È un design unico con un aspetto elegante e perfetto da usare in ufficio o a casa. È
molto comodo caricare i tuoi dispositivi smart sul nostro prodotto, specialmente per gli
utenti Apple. C'è la protezione di sovraccarico e la funzione FOD, poi ricaricare i tuoi
dispositivi senza preoccuparti.
Ventola di
raffreddamento
Ventola di
raffreddamento
Porta Tipo C
Etichetta
ISTRUZIONI LUCE LED
Per Apple
RICARICA WIRELESS DI PIÙ DISPOSITIVI
COME USARE
Compatibile con iPhone
serie 12/13 /iPhone
12/13 serie Case con
MagSafe
Compatibile solo con
iWatch 7/6/5/4/3/2/SE
Compatibile con
AirPods 2/3/Pro
Le chargeur sans fil 3 en 1 est une station de recharge multifonction, vous pouvez
charger simultanément 3 appareils intelligents (iPhone12/13 Series, iWatch et
oreillettes) avec notre produit. Il est compatible avec le iPhone12/13 Series, iWatch,
AirPods et la plupart des TWS.
Il a un design unique avec une apparence élégante, et il est parfait pour être utilisé
aussi bien au bureau qu'à la maison. Notre produit est très pratique pour charger vos
appareils intelligents, notamment pour les utilisateurs d'Apple. Il est doté d'une
protection contre les surcharges et d'une fonction FOD, vous pouvez profiter
pleinement de votre expérience de charge.
3 IN 1 MAGNETIC WIRELESS CHARGER
USER MANUAL
To ensure safe and efficient charging of 3 devices, you must use a 9V/2A adapter
(Qualcomm Quick Charger 2.0 or 3.0) and fast charging cable (if you don’t use a
suitable adapter and fast charging cable, the charger may not be able to charge the
phone or may not Charging 3 devices at the same time or may even damage the
charger).
Note:
PRODUCT APPEARANCE
PRODUCT INTRODUCTION
The 3 in 1 Wireless Charger is multi function charging station, you can charge 3 smart
devices (iPhone12/13 series, iWatch and earbuds) on our product at the same time. It
is compatible with iPhone12/13 series, iWatch, AirPods, and most of TWS.
It is unique design with elegant appearance, and perfect to use at office or at home. It
is very convenient to charge your smart devices on our product especially for Apple
user. There is protection of over-charge and FOD function, you can enjoy your
charging experience.
Cooling Vent
Cooling Vent
Type-C Port
Label
For Apple
WIRELESS CHARGING OF MULTIPLE DEVICES
HOW TO USE
Compatible with iPhone
12/13 series
Only Compatible with
iWatch 7/6/5/4/3/2/SE
Compatible with
AirPods 2/3/Pro
LED LIGHT INSTRUCTIONS
LED-Anzeige
LED-Farbe
Standby-Modus Handy-Ladevorgang FOD
Lumière LED
Couleurs LED
Mode veille Chargement du téléphone FOD
LED light
LED color
Standby mode Phone charging FOD
Luz LED
Color del LED
Modo de espera Carga del teléfono FOD
Luce LED
Colore del LED
Modalità standby Zona di ricarica
del telefono FOD
For iOS+Andriod Devices
Other TWS earbuds
which support
wireless charging
Horizontally
Para dispositivos iOS+Android
Otro Auriculares TWS
que admiten la carga
inalámbrica
Horizontalmente
Per dispositivi iOS+Android
Altri auricolari TWS
che supportano la
ricarica wireless
Orizzontale
Für iOS+Android-Geräte
Sonstige TWS-Ohrhörer,
die kabelloses Laden
unterstützen
Horizontal
Pour les appareils iOS+Andriod
Autres oreillettes TWS
qui prennent en charge
la recharge sans fil
Horizontalement
iWatch Charging
Area
Phone Charging
Area
LED Indicate
Light
Earbuds Charging
Area
1. Magnetic wireless charging X 1 2. User manual X 1 3. Type-C quick charging cable X 1
4. Adapter X 1
PACKING LIST
Input: 9V/2A, 12V/1.5A
Output(Phone): 15W(Max)/10W/7.5W/5W
Output(iWatch): 2.5W(Max)
Output(Earbuds): 3.0W(Max)
Input Port: Type-C
Conversion Rate: ≥73%(Phone)
Product Size:
164.2x144.9x53.3mm(fold)
PRODUCT SPECIFICATION
1. If you're experiencing interrupted or slow charging, check the following:
(1) The back of your phone should not have any metal, pop sockets, or credit cards.
(2) Put the phone in the center of the charging surface (this lets the charging coil in your phone
line up with the one inside the wireless charger).
(3) Phone cases should be no thicker than 5 mm for effective charging.
(4) Check whether the adapter is QC 3.0 fast charger.
FAQ
3.Earbuds
AirPods (2nd generation) / AirPods Pro / AirPods (3nd generation)
The others Qi enable earbuds
1.iPhone
iPhone 13,13 Pro,13 Pro Max,13 mini
iPhone 12,12 Pro,12 Pro Max,12 mini
iPhone Leather Wallet with Magnetic
iPhone 13 Series Case with MagSafe
iPhone 12 Series Case with MagSafe
COMPATIBLE DEVICES
2.Apple Watch
Apple Watch Series 7 / Series 6 / Series 5 / Series 4 / Series 3 / Series 2 / SE
Green light on Blue light breathing Blue and green
flashing Grün Licht -
konstant Blaues Licht -
pulsierend Blaues und Grün
Licht - blinkend Lumière verte
allumée Lumière bleue
haletante Clignotement bleu
et vert
Luz verde
encendida Luz azul en modo
respiración Azul y verde
parpadeando Lampada verde
accesa con luce Spia di colore blu Blu e verde
lampeggiante
Anti-slip
Silicone
Tapete de
silicona
antideslizante
Das sind
waschgepolster
Antidérapant
silicone mat
Tappeti di
silicone
antisdrucciolevole
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
  • Page 1 1
  • Page 2 2

Baseus 3 in 1 Magnetic Wireless Charger Manuel utilisateur

3 in 1 Magnetic Wireless Charger
Marque
Baseus
Modèle
3 in 1 Magnetic Wireless Charger
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents