Apple watch Charger
2
Adapter×1
5.0 OPERATION
Operation Procedures
1. Connect charger to the power adapter.
2. Place your device on the charger, and the light will flash one time,
and then the blue light will be on during standby.
3. Please take out the device after it is fully charged.
Note: green light for flashing when malfunction occurs.
Operation Notes
1. For optimum performance, please use charger according to this
user manual.
2. Please connect the Wireless Charging Pad to a power adapter
which output 12V/2.5A,
3. Please unplug the charger after using.
4. Do not use the charger with an electronic product which is not
in conformity with the specifications, so as to avoid any problem
caused by specification mismatching.
5. It’s normal that charger will be a little overheated in the use
process.
6. When the charger stops working under some accidents, you need
to check whether the device is compatible with this charger.
7. Do not let the Wireless Charging Pad close to fire, such as stove,
candles and etc.
8. Do not let the Wireless Charging Pad soak into liquid, such as
swimming pool, bathtub, etc.
9. Do not wash the Wireless Charging Pad with corrosive cleaner.
10. If the wireless charger cannot work properly, please contact the
store or distributor in your area.
FCC Warning
This device complies with Part 18 of the FCC Rules.
Refer to FCC Part 18.213(c) and KDB 784748 Anner A section A.5:
Max. Electric Field Emissions: 3.3455V/m
Max. Magnetic Field Emissions: 0.8003 A/m
(b) The maintenance of the system is the responsibility of the manufacturer.
(c) To prevent interference, the product should be as far away from devices operating
at the same frequency as possible.